ALT-PU-2026-7342-11 — kernel-image-std-def

BDU:2026-03570

MEDIUM5.5

Уязвимость функции nv3_arb() модуля drivers/video/fbdev/riva/riva_hw.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-24Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0СРЕДНЯЯ 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-04167

MEDIUM6.2

Уязвимость функции dvb_ringbuffer_init() модуля drivers/media/dvb-core/dmxdev.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-29Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 6.2

CVSS:3.x/AV:L/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H

CVSS 2.0СРЕДНЯЯ 5.2

CVSS:2.0/AV:L/AC:H/Au:N/C:P/I:P/A:C

Ссылки

BDU:2026-04645

MEDIUM5.5

Уязвимость функции act_gate() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-04-05Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0СРЕДНЯЯ 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-04852

HIGH7.5

Уязвимость функции icmp_tag_validation() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-04-07Изменено: 2026-06-03

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0ВЫСОКАЯ 7.8

CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:N/A:C

Ссылки

BDU:2026-05019

MEDIUM5.5

Уязвимость функции sigd_send() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-04-12Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0СРЕДНЯЯ 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-05258

HIGH7.0

Уязвимость компонента NFSv4.0 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-04-13Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.0

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.0

CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-05764

MEDIUM5.5

Уязвимость компонента sunrpc ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-04-23Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0СРЕДНЯЯ 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-05766

MEDIUM5.5

Уязвимость компонента NFSD ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-04-23Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0СРЕДНЯЯ 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-05768

MEDIUM4.7

Уязвимость функции nd_async_device_register() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-04-23Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0НИЗКАЯ 3.8

CVSS:2.0/AV:L/AC:H/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-06123

HIGH7.8

Уязвимость модуля для реализации AEAD-алгоритмов algif_aead ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии

Опубликовано: 2026-04-29Изменено: 2026-06-03

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-06439

HIGH8.8

Уязвимость компонента xfrm ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии до уровня root

Опубликовано: 2026-05-07Изменено: 2026-05-31

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-06493

MEDIUM5.5

Уязвимость функции tc_chain_fill_node() ядра операционных систем Linux, позволяющая нарушителю получить несанкционированный доступ к конфиденциальной информации

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0СРЕДНЯЯ 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-06495

HIGH8.4

Уязвимость функции pn532_receive_buf() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 8.4

CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0ВЫСОКАЯ 7.2

CVSS:2.0/AV:L/AC:L/Au:N/C:C/I:C/A:C

Ссылки

BDU:2026-06497

HIGH7.0

Уязвимость функции nf_conntrack_helper_unregister() ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.0

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.0

CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-06498

MEDIUM5.5

Уязвимость функции ctnetlink_alloc_expect() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0СРЕДНЯЯ 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

Ссылки

BDU:2026-06501

HIGH8.4

Уязвимость функции nft_queue() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 8.4

CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0ВЫСОКАЯ 7.2

CVSS:2.0/AV:L/AC:L/Au:N/C:C/I:C/A:C

Ссылки

BDU:2026-06503

HIGH7.1

Уязвимость компонента netfilter x_tables ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность и доступность защищаемой информации

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

CVSS 2.0СРЕДНЯЯ 6.2

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:N/A:C

Ссылки

BDU:2026-06505

HIGH7.8

Уязвимость функции regsafe() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию или вызвать отказ в обслуживании

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-06506

HIGH7.8

Уязвимость модуля crypto/authencesn.c ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-06511

HIGH7.8

Уязвимость модуля drivers/net/ethernet/cadence/macb_pci.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-05-11Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-07605

HIGH7.8

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-05-31

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-07606

HIGH7.8

Уязвимость функции verify_dfa() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-05-31

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

BDU:2026-07607

MEDIUM6.3

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю оказать воздействие на целостность и доступность защищаемой информации

Опубликовано: 2026-05-31

CVSS 3.xСРЕДНЯЯ 6.3

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H

CVSS 2.0СРЕДНЯЯ 5.5

CVSS:2.0/AV:L/AC:H/Au:S/C:N/I:C/A:C

Ссылки

BDU:2026-07608

HIGH7.8

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-05-31

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0СРЕДНЯЯ 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

Ссылки

CVE-2025-71232

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Free sp in error path to fix system crash System crash seen during load/unload test in a loop, [61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X. [61110.467494] ============================================================================= [61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown() [61110.467501] ----------------------------------------------------------------------------- [61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467515] Call Trace: [61110.467516] [61110.467519] dump_stack_lvl+0x34/0x48 [61110.467526] slab_err.cold+0x53/0x67 [61110.467534] __kmem_cache_shutdown+0x16e/0x320 [61110.467540] kmem_cache_destroy+0x51/0x160 [61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280 [61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [61110.467616] ? do_syscall_64+0x5c/0x90 [61110.467619] ? exc_page_fault+0x62/0x150 [61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [61110.467626] [61110.467627] Disabling lock debugging due to kernel taint [61110.467635] Object 0x0000000026f7e6e6 @offset=16000 [61110.467639] ------------[ cut here ]------------ [61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160 [61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160 [61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 [61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282 [61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027 [61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0 [61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7 [61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000 [61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000 [61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0 [61110.467736] PKRU: 55555554 [61110.467737] Call Trace: [61110.467738] [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280 Free sp in the error path to fix the crash.

Опубликовано: 2026-02-18Изменено: 2026-03-18

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2025-71235

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Delay module unload while fabric scan in progress System crash seen during load/unload test in a loop. [105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086 [105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0 [105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000 [105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000 [105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0 [105954.384928] PKRU: 55555554 [105954.384929] Call Trace: [105954.384931] [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx] [105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx] [105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx] [105954.384999] ? __wake_up_common+0x80/0x190 [105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx] [105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx] [105954.385040] ? __handle_irq_event_percpu+0x3d/0x190 [105954.385044] ? handle_irq_event+0x58/0xb0 [105954.385046] ? handle_edge_irq+0x93/0x240 [105954.385050] ? __common_interrupt+0x41/0xa0 [105954.385055] ? common_interrupt+0x3e/0xa0 [105954.385060] ? asm_common_interrupt+0x22/0x40 The root cause of this was that there was a free (dma_free_attrs) in the interrupt context. There was a device discovery/fabric scan in progress. A module unload was issued which set the UNLOADING flag. As part of the discovery, after receiving an interrupt a work queue was scheduled (which involved a work to be queued). Since the UNLOADING flag is set, the work item was not allocated and the mapped memory had to be freed. The free occurred in interrupt context leading to system crash. Delay the driver unload until the fabric scan is complete to avoid the crash.

Опубликовано: 2026-02-18Изменено: 2026-03-18

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2025-71236

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate sp before freeing associated memory System crash with the following signature [154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete [154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3. [154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5. [154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000. [154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000. [154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [154565.553080] #PF: supervisor read access in kernel mode [154565.553082] #PF: error_code(0x0000) - not-present page [154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0 [154565.553089] Oops: 0000 1 PREEMPT SMP PTI [154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1 [154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024 [154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b [154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286 [154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002 [154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47 [154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a [154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0 [154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000 [154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000 [154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0 [154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [154565.553159] PKRU: 55555554 [154565.553160] Call Trace: [154565.553162] [154565.553165] ? show_trace_log_lvl+0x1c4/0x2df [154565.553172] ? show_trace_log_lvl+0x1c4/0x2df [154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553215] ? __die_body.cold+0x8/0xd [154565.553218] ? page_fault_oops+0x134/0x170 [154565.553223] ? snprintf+0x49/0x70 [154565.553229] ? exc_page_fault+0x62/0x150 [154565.553238] ? asm_exc_page_fault+0x22/0x30 Check for sp being non NULL before freeing any associated memory

Опубликовано: 2026-02-18Изменено: 2026-03-18

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2025-71237

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nilfs2: Fix potential block overflow that cause system hang When a user executes the FITRIM command, an underflow can occur when calculating nblocks if end_block is too small. Since nblocks is of type sector_t, which is u64, a negative nblocks value will become a very large positive integer. This ultimately leads to the block layer function __blkdev_issue_discard() taking an excessively long time to process the bio chain, and the ns_segctor_sem lock remains held for a long period. This prevents other tasks from acquiring the ns_segctor_sem lock, resulting in the hang reported by syzbot in [1]. If the ending block is too small, typically if it is smaller than 4KiB range, depending on the usage of the segment 0, it may be possible to attempt a discard request beyond the device size causing the hang. Exiting successfully and assign the discarded size (0 in this case) to range->len. Although the start and len values in the user input range are too small, a conservative strategy is adopted here to safely ignore them, which is equivalent to a no-op; it will not perform any trimming and will not throw an error. [1] task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000 Call Trace: rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272 nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline] nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684 [ryusuke: corrected part of the commit message about the consequences]

Опубликовано: 2026-02-18Изменено: 2026-03-18

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2025-71238

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix bsg_done() causing double free Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done().

Опубликовано: 2026-03-04Изменено: 2026-03-17

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2025-71274

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since the introduction of driver_set_override, the comments in include/linux/rpmsg.h have stated that this helper must be used to set or clear driver_override, but the implementation was not updated until now. Because driver_set_override modifies and frees the string while holding the device_lock, the new driver_override_show now correctly holds the device_lock during the read operation to prevent the race. Additionally, since rpmsg_string_attr has only ever been used for driver_override, removing the macro simplifies the code.

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2025-71292

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: jfs: nlink overflow in jfs_rename If nlink is maximal for a directory (-1) and inside that directory you perform a rename for some child directory (not moving from the parent), then the nlink of the first directory is first incremented and later decremented. Normally this is fine, but when nlink = -1 this causes a wrap around to 0, and then drop_nlink issues a warning. After applying the patch syzbot no longer issues any warnings. I also ran some basic fs tests to look for any regressions.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23222

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly The existing allocation of scatterlists in omap_crypto_copy_sg_lists() was allocating an array of scatterlist pointers, not scatterlist objects, resulting in a 4x too small allocation. Use sizeof(*new_sg) to get the correct object size.

Опубликовано: 2026-02-18Изменено: 2026-06-02

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23229

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - Add spinlock protection with virtqueue notification When VM boots with one virtio-crypto PCI device and builtin backend, run openssl benchmark command with multiple processes, such as openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32 openssl processes will hangup and there is error reported like this: virtio_crypto virtio0: dataq.0:id 3 is not a head! It seems that the data virtqueue need protection when it is handled for virtio done notification. If the spinlock protection is added in virtcrypto_done_task(), openssl benchmark with multiple processes works well.

Опубликовано: 2026-02-18Изменено: 2026-06-02

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23234

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

Опубликовано: 2026-03-04Изменено: 2026-03-17

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23235

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix out-of-bounds access in sysfs attribute read/write Some f2fs sysfs attributes suffer from out-of-bounds memory access and incorrect handling of integer values whose size is not 4 bytes. For example: vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out vm:~# cat /sys/fs/f2fs/vde/carve_out 65537 vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold 1 carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit integer. However, the sysfs interface allows setting it to a value larger than 255, resulting in an out-of-range update. atgc_age_threshold maps to {struct atgc_management}->age_threshold, which is a 64-bit integer, but its sysfs interface cannot correctly set values larger than UINT_MAX. The root causes are: 1. __sbi_store() treats all default values as unsigned int, which prevents updating integers larger than 4 bytes and causes out-of-bounds writes for integers smaller than 4 bytes. 2. f2fs_sbi_show() also assumes all default values are unsigned int, leading to out-of-bounds reads and incorrect access to integers larger than 4 bytes. This patch introduces {struct f2fs_attr}->size to record the actual size of the integer associated with each sysfs attribute. With this information, sysfs read and write operations can correctly access and update values according to their real data size, avoiding memory corruption and truncation.

Опубликовано: 2026-03-04Изменено: 2026-03-17

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-23236

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: smscufx: properly copy ioctl memory to kernelspace The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel.

Опубликовано: 2026-03-04Изменено: 2026-06-02

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23237

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86: classmate-laptop: Add missing NULL pointer checks In a few places in the Classmate laptop driver, code using the accel object may run before that object's address is stored in the driver data of the input device using it. For example, cmpc_accel_sensitivity_store_v4() is the "show" method of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(), before calling dev_set_drvdata() for inputdev->dev. If the sysfs attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev) call in in cmpc_accel_sensitivity_store_v4() returns NULL which leads to a NULL pointer dereference going forward. Moreover, sysfs attributes using the input device are added before initializing that device by cmpc_add_acpi_notify_device() and if one of them is accessed before running that function, a NULL pointer dereference will occur. For example, cmpc_accel_sensitivity_attr_v4 is added before calling cmpc_add_acpi_notify_device() and if it is read prematurely, the dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4() returns NULL which leads to a NULL pointer dereference going forward. Fix this by adding NULL pointer checks in all of the relevant places.

Опубликовано: 2026-03-04Изменено: 2026-03-17

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23238

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0.

Опубликовано: 2026-03-04Изменено: 2026-06-02

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23242

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix potential NULL pointer dereference in header processing If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(), qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data() dereferences qp->rx_fpdu->more_ddp_segs without checking, which may lead to a NULL pointer deref. Only check more_ddp_segs when rx_fpdu is present. KASAN splat: [ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] [ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50

Опубликовано: 2026-03-18Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23243

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80

Опубликовано: 2026-03-18Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23245

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gate: snapshot parameters with RCU on replace The gate action can be replaced while the hrtimer callback or dump path is walking the schedule list. Convert the parameters to an RCU-protected snapshot and swap updates under tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits the entry list, preserve the existing schedule so the effective state is unchanged.

Опубликовано: 2026-03-18Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23253

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: fix wrong reinitialization of ringbuffer on reopen dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock.

Опубликовано: 2026-03-18Изменено: 2026-06-01

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23266

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: rivafb: fix divide error in nv3_arb() A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856

Опубликовано: 2026-03-18Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23268

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unprivileged local user can do privileged policy management An unprivileged local user can load, replace, and remove profiles by opening the apparmorfs interfaces, via a confused deputy attack, by passing the opened fd to a privileged process, and getting the privileged process to write to the interface. This does require a privileged target that can be manipulated to do the write for the unprivileged process, but once such access is achieved full policy management is possible and all the possible implications that implies: removing confinement, DoS of system or target applications by denying all execution, by-passing the unprivileged user namespace restriction, to exploiting kernel bugs for a local privilege escalation. The policy management interface can not have its permissions simply changed from 0666 to 0600 because non-root processes need to be able to load policy to different policy namespaces. Instead ensure the task writing the interface has privileges that are a subset of the task that opened the interface. This is already done via policy for confined processes, but unconfined can delegate access to the opened fd, by-passing the usual policy check.

Опубликовано: 2026-03-18Изменено: 2026-05-29

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23269

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: apparmor: validate DFA start states are in bounds in unpack_pdb Start states are read from untrusted data and used as indexes into the DFA state tables. The aa_dfa_next() function call in unpack_pdb() will access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds the number of states in the DFA, this results in an out-of-bound read. ================================================================== BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360 Read of size 4 at addr ffff88811956fb90 by task su/1097 ... Reject policies with out-of-bounds start states during unpacking to prevent the issue.

Опубликовано: 2026-03-18Изменено: 2026-05-29

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-23273

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: macvlan: observe an RCU grace period in macvlan_common_newlink() error path valis reported that a race condition still happens after my prior patch. macvlan_common_newlink() might have made @dev visible before detecting an error, and its caller will directly call free_netdev(dev). We must respect an RCU period, either in macvlan or the core networking stack. After adding a temporary mdelay(1000) in macvlan_forward_source_one() to open the race window, valis repro was: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source (ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4 PING 1.2.3.4 (1.2.3.4): 56 data bytes RTNETLINK answers: Invalid argument BUG: KASAN: slab-use-after-free in macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) Read of size 8 at addr ffff888016bb89c0 by task e/175 CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) kasan_report (mm/kasan/report.c:597) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) ? tasklet_init (kernel/softirq.c:983) macvlan_handle_frame (drivers/net/macvlan.c:501) Allocated by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) __kasan_kmalloc (mm/kasan/common.c:419) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657 mm/slub.c:7140) alloc_netdev_mqs (net/core/dev.c:12012) rtnl_create_link (net/core/rtnetlink.c:3648) rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Freed by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kfree (mm/slub.c:6674 mm/slub.c:6882) rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)

Опубликовано: 2026-03-20Изменено: 2026-05-22

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23274

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type.

Опубликовано: 2026-03-20Изменено: 2026-05-22

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23277

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit through slave devices, but does not update skb->dev to the slave device beforehand. When a gretap tunnel is a TEQL slave, the transmit path reaches iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0 master) and later calls iptunnel_xmit_stats(dev, pkt_len). This function does: get_cpu_ptr(dev->tstats) Since teql_master_setup() does not set dev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes NULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206) Fix this by setting skb->dev = slave before calling netdev_start_xmit(), so that tunnel xmit functions see the correct slave device with properly allocated tstats.

Опубликовано: 2026-03-20Изменено: 2026-05-22

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23279

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame() In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced at lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); The mesh_matches_local() check above only validates the Mesh ID, Mesh Configuration, and Supported Rates IEs. It does not verify the presence of the Mesh Channel Switch Parameters IE (element ID 118). When a received CSA action frame omits that IE, ieee802_11_parse_elems() leaves elems->mesh_chansw_params_ie as NULL, and the unconditional dereference causes a kernel NULL pointer dereference. A remote mesh peer with an established peer link (PLINK_ESTAB) can trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame that includes a matching Mesh ID and Mesh Configuration IE but omits the Mesh Channel Switch Parameters IE. No authentication beyond the default open mesh peering is required. Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000 Fix by adding a NULL check for mesh_chansw_params_ie after mesh_matches_local() returns, consistent with how other optional IEs are guarded throughout the mesh code. The bug has been present since v3.13 (released 2014-01-19).

Опубликовано: 2026-03-25Изменено: 2026-05-21

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23281

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix use-after-free in lbs_free_adapter() The lbs_free_adapter() function uses timer_delete() (non-synchronous) for both command_timer and tx_lockup_timer before the structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If a timer callback is executing when lbs_free_adapter() is called, the callback will access freed memory since lbs_cfg_free() frees the containing structure immediately after lbs_free_adapter() returns. Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler) access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields, which would all be use-after-free violations. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. This bug was introduced in commit 8f641d93c38a ("libertas: detect TX lockups and reset hardware") where del_timer() was used instead of del_timer_sync() in the cleanup path. The command_timer has had the same issue since the driver was first written.

Опубликовано: 2026-03-25Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23286

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix null-ptr-deref in lec_arp_clear_vccs syzkaller reported a null-ptr-deref in lec_arp_clear_vccs(). This issue can be easily reproduced using the syzkaller reproducer. In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc). When the underlying VCC is closed, lec_vcc_close() iterates over all ARP entries and calls lec_arp_clear_vccs() for each matched entry. For example, when lec_vcc_close() iterates through the hlists in priv->lec_arp_empty_ones or other ARP tables: 1. In the first iteration, for the first matched ARP entry sharing the VCC, lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back) and sets vcc->user_back to NULL. 2. In the second iteration, for the next matched ARP entry sharing the same VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash. Fix this by adding a null check for vpriv before dereferencing it. If vpriv is already NULL, it means the VCC has been cleared by a previous call, so we can safely skip the cleanup and just clear the entry's vcc/recv_vcc pointers. The entire cleanup block (including vcc_release_async()) is placed inside the vpriv guard because a NULL vpriv indicates the VCC has already been fully released by a prior iteration — repeating the teardown would redundantly set flags and trigger callbacks on an already-closing socket. The Fixes tag points to the initial commit because the entry->vcc path has been vulnerable since the original code. The entry->recv_vcc path was later added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back") with the same pattern, and both paths are fixed here.

Опубликовано: 2026-03-25Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23289

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq() Fix a user triggerable leak on the system call failure path.

Опубликовано: 2026-03-25Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23290

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: validate USB endpoints The pegasus driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Опубликовано: 2026-03-25Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23291

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: properly drop the usb interface reference on disconnect When the device is disconnected from the driver, there is a "dangling" reference count on the usb interface that was grabbed in the probe callback. Fix this up by properly dropping the reference after we are done with it.

Опубликовано: 2026-03-25Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23293

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If an IPv6 packet is injected into the interface, route_shortcircuit() is called and a NULL pointer dereference happens on neigh_lookup(). BUG: kernel NULL pointer dereference, address: 0000000000000380 Oops: Oops: 0000 [#1] SMP NOPTI [...] RIP: 0010:neigh_lookup+0x20/0x270 [...] Call Trace: vxlan_xmit+0x638/0x1ef0 [vxlan] dev_hard_start_xmit+0x9e/0x2e0 __dev_queue_xmit+0xbee/0x14e0 packet_sendmsg+0x116f/0x1930 __sys_sendto+0x1f5/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x12f/0x1590 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by adding an early check on route_shortcircuit() when protocol is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because VXLAN can be built-in even when IPv6 is built as a module.

Опубликовано: 2026-03-25Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23298

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: ucan: Fix infinite loop from zero-length messages If a broken ucan device gets a message with the message length field set to 0, then the driver will loop for forever in ucan_read_bulk_callback(), hanging the system. If the length is 0, just skip the message and go on to the next one. This has been fixed in the kvaser_usb driver in the past in commit 0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in command parsers"), so there must be some broken devices out there like this somewhere.

Опубликовано: 2026-03-25Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23300

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop.

Опубликовано: 2026-03-25Изменено: 2026-05-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23303

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials.

Опубликовано: 2026-03-25Изменено: 2026-05-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23304

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu() l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too.

Опубликовано: 2026-03-25Изменено: 2026-05-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23307

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message When looking at the data in a USB urb, the actual_length is the size of the buffer passed to the driver, not the transfer_buffer_length which is set by the driver as the max size of the buffer. When parsing the messages in ems_usb_read_bulk_callback() properly check the size both at the beginning of parsing the message to make sure it is big enough for the expected structure, and at the end of the message to make sure we don't overflow past the end of the buffer for the next message.

Опубликовано: 2026-03-25Изменено: 2026-05-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23312

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: validate USB endpoints The kaweth driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Опубликовано: 2026-03-25Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23318

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Use correct version for UAC3 header validation The entry of the validators table for UAC3 AC header descriptor is defined with the wrong protocol version UAC_VERSION_2, while it should have been UAC_VERSION_3. This results in the validator never matching for actual UAC3 devices (protocol == UAC_VERSION_3), causing their header descriptors to bypass validation entirely. A malicious USB device presenting a truncated UAC3 header could exploit this to cause out-of-bounds reads when the driver later accesses unvalidated descriptor fields. The bug was introduced in the same commit as the recently fixed UAC3 feature unit sub-type typo, and appears to be from the same copy-paste error when the UAC3 section was created from the UAC2 section.

Опубликовано: 2026-03-25Изменено: 2026-04-23

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-23336

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Опубликовано: 2026-03-25Изменено: 2026-04-23

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23339

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free skb on nci_transceive early error paths nci_transceive() takes ownership of the skb passed by the caller, but the -EPROTO, -EINVAL, and -EBUSY error paths return without freeing it. Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes the nci/nci_dev selftest hits the error path occasionally in NIPA, and kmemleak detects leaks: unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0

Опубликовано: 2026-03-25Изменено: 2026-04-23

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23351

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23352

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/efi: defer freeing of boot services memory efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE and EFI_BOOT_SERVICES_DATA using memblock_free_late(). There are two issue with that: memblock_free_late() should be used for memory allocated with memblock_alloc() while the memory reserved with memblock_reserve() should be freed with free_reserved_area(). More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y efi_free_boot_services() is called before deferred initialization of the memory map is complete. Benjamin Herrenschmidt reports that this causes a leak of ~140MB of RAM on EC2 t3a.nano instances which only have 512MB or RAM. If the freed memory resides in the areas that memory map for them is still uninitialized, they won't be actually freed because memblock_free_late() calls memblock_free_pages() and the latter skips uninitialized pages. Using free_reserved_area() at this point is also problematic because __free_page() accesses the buddy of the freed page and that again might end up in uninitialized part of the memory map. Delaying the entire efi_free_boot_services() could be problematic because in addition to freeing boot services memory it updates efi.memmap without any synchronization and that's undesirable late in boot when there is concurrency. More robust approach is to only defer freeing of the EFI boot services memory. Split efi_free_boot_services() in two. First efi_unmap_boot_services() collects ranges that should be freed into an array then efi_free_boot_services() later frees them after deferred init is complete.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23356

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23357

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock in error path of mcp251x_open The mcp251x_open() function call free_irq() in its error path with the mpc_lock mutex held. But if an interrupt already occurred the interrupt handler will be waiting for the mpc_lock and free_irq() will deadlock waiting for the handler to finish. This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but for the error path. To solve this issue move the call to free_irq() after the lock is released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ handler will exit right away once it acquired the lock.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23362

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix locking for bcm_op runtime updates Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") added a locking for some variables that can be modified at runtime when updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup(). Usually the RX_SETUP only handles and filters incoming traffic with one exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is sent when a specific RTR frame is received. Therefore the rx bcm_op uses bcm_can_tx() which uses the bcm_tx_lock that was only initialized in bcm_tx_setup(). Add the missing spin_lock_init() when allocating the bcm_op in bcm_rx_setup() to handle the RTR case properly.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23365

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: validate USB endpoints The kalmia driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23367

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: radiotap: reject radiotap with unknown bits The radiotap parser is currently only used with the radiotap namespace (not with vendor namespaces), but if the undefined field 18 is used, the alignment/size is unknown as well. In this case, iterator->_next_ns_data isn't initialized (it's only set for skipping vendor namespaces), and syzbot points out that we later compare against this uninitialized value. Fix this by moving the rejection of unknown radiotap fields down to after the in-namespace lookup, so it will really use iterator->_next_ns_data only for vendor namespaces, even in case undefined fields are present.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23368

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: phy: register phy led_triggers during probe to avoid AB-BA deadlock There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and LED_TRIGGER_PHY are enabled: [ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock); [ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234 [ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c [ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c [ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0 [ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0 [ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c [ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78 [ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock(); [ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0 [ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c [ 1362.104022] [<80014504>] syscall_common+0x34/0x58 Here LED_TRIGGER_PHY is registering LED triggers during phy_attach while holding RTNL and then taking triggers_list_lock. [ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock(); [ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4 [ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock); [ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c [ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc [ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c [ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4 [ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c [ 1362.232164] [<80014504>] syscall_common+0x34/0x58 Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes triggers_list_lock and then RTNL. A classical AB-BA deadlock. phy_led_triggers_registers() does not require the RTNL, it does not make any calls into the network stack which require protection. There is also no requirement the PHY has been attached to a MAC, the triggers only make use of phydev state. This allows the call to phy_led_triggers_registers() to be placed elsewhere. PHY probe() and release() don't hold RTNL, so solving the AB-BA deadlock.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23372

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23379

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: fix divide by zero in the offload path Offloading ETS requires computing each class' WRR weight: this is done by averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned int, the same integer size as the individual DRR quanta, can overflow and even cause division by zero, like it happened in the following splat: Oops: divide error: 0000 [#1] SMP PTI CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Call Trace: ets_qdisc_change+0x870/0xf40 [sch_ets] qdisc_create+0x12b/0x540 tc_modify_qdisc+0x6d7/0xbd0 rtnetlink_rcv_msg+0x168/0x6b0 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x1d6/0x2b0 netlink_sendmsg+0x22e/0x470 ____sys_sendmsg+0x38a/0x3c0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x111/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f440b81c77e Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003 RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8 R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980 Modules linked in: sch_ets(E) netdevsim(E) ---[ end trace 0000000000000000 ]--- RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix this using 64-bit integers for 'q_sum' and 'q_psum'.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23381

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23382

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), we handle the fact that raw event callbacks can happen even for a HID device that has not been "claimed" causing a crash if a broken device were attempted to be connected to the system. Fix up the remaining in-tree HID drivers that forgot to add this same check to resolve the same issue.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23388

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-23391

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23395

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ Currently the code attempts to accept requests regardless of the command identifier which may cause multiple requests to be marked as pending (FLAG_DEFER_SETUP) which can cause more than L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer causing an overflow. The spec is quite clear that the same identifier shall not be used on subsequent requests: 'Within each signaling channel a different Identifier shall be used for each successive request or indication.' https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d So this attempts to check if there are any channels pending with the same identifier and rejects if any are found.

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23396

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL deref in mesh_matches_local() mesh_matches_local() unconditionally dereferences ie->mesh_config to compare mesh configuration parameters. When called from mesh_rx_csa_frame(), the parsed action-frame elements may not contain a Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a kernel NULL pointer dereference. The other two callers are already safe: - ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before calling mesh_matches_local() - mesh_plink_get_event() is only reached through mesh_process_plink_frame(), which checks !elems->mesh_config, too mesh_rx_csa_frame() is the only caller that passes raw parsed elements to mesh_matches_local() without guarding mesh_config. An adjacent attacker can exploit this by sending a crafted CSA action frame that includes a valid Mesh ID IE but omits the Mesh Configuration IE, crashing the kernel. The captured crash log: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events_unbound cfg80211_wiphy_work [...] Call Trace: ? __pfx_mesh_matches_local (net/mac80211/mesh.c:65) ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686) [...] ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802) [...] cfg80211_wiphy_work (net/wireless/core.c:426) process_one_work (net/kernel/workqueue.c:3280) ? assign_work (net/kernel/workqueue.c:1219) worker_thread (net/kernel/workqueue.c:3352) ? __pfx_worker_thread (net/kernel/workqueue.c:3385) kthread (net/kernel/kthread.c:436) [...] ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255) This patch adds a NULL check for ie->mesh_config at the top of mesh_matches_local() to return false early when the Mesh Configuration IE is absent.

Опубликовано: 2026-03-26Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23397

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: nfnetlink_osf: validate individual option lengths in fingerprints nfnl_osf_add_callback() validates opt_num bounds and string NUL-termination but does not check individual option length fields. A zero-length option causes nf_osf_match_one() to enter the option matching loop even when foptsize sums to zero, which matches packets with no TCP options where ctx->optp is NULL: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: nf_osf_match (net/netfilter/nfnetlink_osf.c:227) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:293) nf_hook_slow (net/netfilter/core.c:623) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) Additionally, an MSS option (kind=2) with length < 4 causes out-of-bounds reads when nf_osf_match_one() unconditionally accesses optp[2] and optp[3] for MSS value extraction. While RFC 9293 section 3.2 specifies that the MSS option is always exactly 4 bytes (Kind=2, Length=4), the check uses "< 4" rather than "!= 4" because lengths greater than 4 do not cause memory safety issues -- the buffer is guaranteed to be at least foptsize bytes by the ctx->optsize == foptsize check. Reject fingerprints where any option has zero length, or where an MSS option has length less than 4, at add time rather than trusting these values in the packet matching hot path.

Опубликовано: 2026-03-26Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-23398

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: icmp: fix NULL pointer dereference in icmp_tag_validation() icmp_tag_validation() unconditionally dereferences the result of rcu_dereference(inet_protos[proto]) without checking for NULL. The inet_protos[] array is sparse -- only about 15 of 256 protocol numbers have registered handlers. When ip_no_pmtu_disc is set to 3 (hardened PMTU mode) and the kernel receives an ICMP Fragmentation Needed error with a quoted inner IP header containing an unregistered protocol number, the NULL dereference causes a kernel panic in softirq context. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143) Call Trace: icmp_rcv (net/ipv4/icmp.c:1527) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207) ip_local_deliver_finish (net/ipv4/ip_input.c:242) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) __netif_receive_skb_one_core (net/core/dev.c:6164) process_backlog (net/core/dev.c:6628) handle_softirqs (kernel/softirq.c:561) Add a NULL check before accessing icmp_strict_tag_validation. If the protocol has no registered handler, return false since it cannot perform strict tag validation.

Опубликовано: 2026-03-26Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23403

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix memory leak in verify_header The function sets `ns = NULL` on every call, leaking the namespace string allocated in previous iterations when multiple profiles are unpacked. This also breaks namespace consistency checking since ns is always NULL when the comparison is made. Remove the incorrect assignment. The caller (aa_unpack) initializes *ns to NULL once before the loop, which is sufficient.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23404

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: replace recursive profile removal with iterative approach The profile removal code uses recursion when removing nested profiles, which can lead to kernel stack exhaustion and system crashes. Reproducer: $ pf='a'; for ((i=0; i<1024; i++)); do echo -e "profile $pf { \n }" | apparmor_parser -K -a; pf="$pf//x"; done $ echo -n a > /sys/kernel/security/apparmor/.remove Replace the recursive __aa_profile_list_release() approach with an iterative approach in __remove_profile(). The function repeatedly finds and removes leaf profiles until the entire subtree is removed, maintaining the same removal semantic without recursion.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23405

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix: limit the number of levels of policy namespaces Currently the number of policy namespaces is not bounded relying on the user namespace limit. However policy namespaces aren't strictly tied to user namespaces and it is possible to create them and nest them arbitrarily deep which can be used to exhaust system resource. Hard cap policy namespaces to the same depth as user namespaces.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23406

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix side-effect bug in match_char() macro usage The match_char() macro evaluates its character parameter multiple times when traversing differential encoding chains. When invoked with *str++, the string pointer advances on each iteration of the inner do-while loop, causing the DFA to check different characters at each iteration and therefore skip input characters. This results in out-of-bounds reads when the pointer advances past the input buffer boundary. [ 94.984676] ================================================================== [ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760 [ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976 [ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 94.986329] Call Trace: [ 94.986341] [ 94.986347] dump_stack_lvl+0x5e/0x80 [ 94.986374] print_report+0xc8/0x270 [ 94.986384] ? aa_dfa_match+0x5ae/0x760 [ 94.986388] kasan_report+0x118/0x150 [ 94.986401] ? aa_dfa_match+0x5ae/0x760 [ 94.986405] aa_dfa_match+0x5ae/0x760 [ 94.986408] __aa_path_perm+0x131/0x400 [ 94.986418] aa_path_perm+0x219/0x2f0 [ 94.986424] apparmor_file_open+0x345/0x570 [ 94.986431] security_file_open+0x5c/0x140 [ 94.986442] do_dentry_open+0x2f6/0x1120 [ 94.986450] vfs_open+0x38/0x2b0 [ 94.986453] ? may_open+0x1e2/0x2b0 [ 94.986466] path_openat+0x231b/0x2b30 [ 94.986469] ? __x64_sys_openat+0xf8/0x130 [ 94.986477] do_file_open+0x19d/0x360 [ 94.986487] do_sys_openat2+0x98/0x100 [ 94.986491] __x64_sys_openat+0xf8/0x130 [ 94.986499] do_syscall_64+0x8e/0x660 [ 94.986515] ? count_memcg_events+0x15f/0x3c0 [ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986540] ? handle_mm_fault+0x1639/0x1ef0 [ 94.986551] ? vma_start_read+0xf0/0x320 [ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0 [ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0 [ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986588] ? irqentry_exit+0x3c/0x590 [ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 94.986597] RIP: 0033:0x7fda4a79c3ea Fix by extracting the character value before invoking match_char, ensuring single evaluation per outer loop.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23407

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix missing bounds check on DEFAULT table in verify_dfa() The verify_dfa() function only checks DEFAULT_TABLE bounds when the state is not differentially encoded. When the verification loop traverses the differential encoding chain, it reads k = DEFAULT_TABLE[j] and uses k as an array index without validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count, therefore, causes both out-of-bounds reads and writes. [ 57.179855] ================================================================== [ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660 [ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993 [ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 57.181563] Call Trace: [ 57.181572] [ 57.181577] dump_stack_lvl+0x5e/0x80 [ 57.181596] print_report+0xc8/0x270 [ 57.181605] ? verify_dfa+0x59a/0x660 [ 57.181608] kasan_report+0x118/0x150 [ 57.181620] ? verify_dfa+0x59a/0x660 [ 57.181623] verify_dfa+0x59a/0x660 [ 57.181627] aa_dfa_unpack+0x1610/0x1740 [ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470 [ 57.181640] unpack_pdb+0x86d/0x46b0 [ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181656] ? aa_unpack_nameX+0x1a8/0x300 [ 57.181659] aa_unpack+0x20b0/0x4c30 [ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181664] ? stack_depot_save_flags+0x33/0x700 [ 57.181681] ? kasan_save_track+0x4f/0x80 [ 57.181683] ? kasan_save_track+0x3e/0x80 [ 57.181686] ? __kasan_kmalloc+0x93/0xb0 [ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130 [ 57.181697] ? policy_update+0x154/0x330 [ 57.181704] aa_replace_profiles+0x15a/0x1dd0 [ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181712] ? aa_loaddata_alloc+0x77/0x140 [ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181717] ? _copy_from_user+0x2a/0x70 [ 57.181730] policy_update+0x17a/0x330 [ 57.181733] profile_replace+0x153/0x1a0 [ 57.181735] ? rw_verify_area+0x93/0x2d0 [ 57.181740] vfs_write+0x235/0xab0 [ 57.181745] ksys_write+0xb0/0x170 [ 57.181748] do_syscall_64+0x8e/0x660 [ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 57.181765] RIP: 0033:0x7f6192792eb2 Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE entries unconditionally.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23408

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix double free of ns_name in aa_replace_profiles() if ns_name is NULL after 1071 error = aa_unpack(udata, &lh, &ns_name); and if ent->ns_name contains an ns_name in 1089 } else if (ent->ns_name) { then ns_name is assigned the ent->ns_name 1095 ns_name = ent->ns_name; however ent->ns_name is freed at 1262 aa_load_ent_free(ent); and then again when freeing ns_name at 1270 kfree(ns_name); Fix this by NULLing out ent->ns_name after it is transferred to ns_name ")

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23409

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix differential encoding verification Differential encoding allows loops to be created if it is abused. To prevent this the unpack should verify that a diff-encode chain terminates. Unfortunately the differential encode verification had two bugs. 1. it conflated states that had gone through check and already been marked, with states that were currently being checked and marked. This means that loops in the current chain being verified are treated as a chain that has already been verified. 2. the order bailout on already checked states compared current chain check iterators j,k instead of using the outer loop iterator i. Meaning a step backwards in states in the current chain verification was being mistaken for moving to an already verified state. Move to a double mark scheme where already verified states get a different mark, than the current chain being kept. This enables us to also drop the backwards verification check that was the cause of the second error as any already verified state is already marked.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23410

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race on rawdata dereference There is a race condition that leads to a use-after-free situation: because the rawdata inodes are not refcounted, an attacker can start open()ing one of the rawdata files, and at the same time remove the last reference to this rawdata (by removing the corresponding profile, for example), which frees its struct aa_loaddata; as a result, when seq_rawdata_open() is reached, i_private is a dangling pointer and freed memory is accessed. The rawdata inodes weren't refcounted to avoid a circular refcount and were supposed to be held by the profile rawdata reference. However during profile removal there is a window where the vfs and profile destruction race, resulting in the use after free. Fix this by moving to a double refcount scheme. Where the profile refcount on rawdata is used to break the circular dependency. Allowing for freeing of the rawdata once all inode references to the rawdata are put.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23411

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race between freeing data and fs accessing it AppArmor was putting the reference to i_private data on its end after removing the original entry from the file system. However the inode can aand does live beyond that point and it is possible that some of the fs call back functions will be invoked after the reference has been put, which results in a race between freeing the data and accessing it through the fs. While the rawdata/loaddata is the most likely candidate to fail the race, as it has the fewest references. If properly crafted it might be possible to trigger a race for the other types stored in i_private. Fix this by moving the put of i_private referenced data to the correct place which is during inode eviction.

Опубликовано: 2026-04-01Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23420

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Fix a locking bug Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer.

Опубликовано: 2026-04-03Изменено: 2026-04-24

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23434

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: serialize lock/unlock against other NAND operations nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area without holding the NAND device lock. On controllers that implement SET_FEATURES via multiple low-level PIO commands, these can race with concurrent UBI/UBIFS background erase/write operations that hold the device lock, resulting in cmd_pending conflicts on the NAND controller. Add nand_get_device()/nand_release_device() around the lock/unlock operations to serialize them against all other NAND controller access.

Опубликовано: 2026-04-03Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23439

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0 (success) without actually creating a socket. Callers such as fou_create() then proceed to dereference the uninitialized socket pointer, resulting in a NULL pointer dereference. The captured NULL deref crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764) [...] Call Trace: genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209) [...] netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1)) __sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1)) __x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130) This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so callers correctly take their error paths. There is only one caller of the vulnerable function and only privileged users can trigger it.

Опубликовано: 2026-04-03Изменено: 2026-04-23

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23446

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: aqc111: Do not perform PM inside suspend callback syzbot reports "task hung in rpm_resume" This is caused by aqc111_suspend calling the PM variant of its write_cmd routine. The simplified call trace looks like this: rpm_suspend() usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING aqc111_suspend() - called for the usb device interface aqc111_write32_cmd() usb_autopm_get_interface() pm_runtime_resume_and_get() rpm_resume() - here we call rpm_resume() on our parent rpm_resume() - Here we wait for a status change that will never happen. At this point we block another task which holds rtnl_lock and locks up the whole networking stack. Fix this by replacing the write_cmd calls with their _nopm variants

Опубликовано: 2026-04-03Изменено: 2026-04-23

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23452

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: PM: runtime: Fix a race condition related to device removal The following code in pm_runtime_work() may dereference the dev->parent pointer after the parent device has been freed: /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); rpm_idle(parent, RPM_ASYNC); spin_unlock(&parent->power.lock); spin_lock(&dev->power.lock); } Fix this by inserting a flush_work() call in pm_runtime_remove(). Without this patch blktest block/001 triggers the following complaint sporadically: BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160 Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081 Workqueue: pm pm_runtime_work Call Trace: dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x8b/0x310 print_report+0xfd/0x1d7 kasan_report+0xd8/0x1d0 __kasan_check_byte+0x42/0x60 lock_acquire.part.0+0x38/0x230 lock_acquire+0x70/0x160 _raw_spin_lock+0x36/0x50 rpm_suspend+0xc6a/0xfe0 rpm_idle+0x578/0x770 pm_runtime_work+0xee/0x120 process_one_work+0xde3/0x1410 worker_thread+0x5eb/0xfe0 kthread+0x37b/0x480 ret_from_fork+0x6cb/0x920 ret_from_fork_asm+0x11/0x20 Allocated by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_alloc_info+0x3d/0x50 __kasan_kmalloc+0xa0/0xb0 __kmalloc_noprof+0x311/0x990 scsi_alloc_target+0x122/0xb60 [scsi_mod] __scsi_scan_target+0x101/0x460 [scsi_mod] scsi_scan_channel+0x179/0x1c0 [scsi_mod] scsi_scan_host_selected+0x259/0x2d0 [scsi_mod] store_scan+0x2d2/0x390 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 do_syscall_64+0xee/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_free_info+0x3f/0x50 __kasan_slab_free+0x67/0x80 kfree+0x225/0x6c0 scsi_target_dev_release+0x3d/0x60 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_dev_release+0xacf/0x12c0 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_put+0x7f/0xc0 [scsi_mod] sdev_store_delete+0xa5/0x120 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23455

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: check for zero length in DecodeQ931() In DecodeQ931(), the UserUserIE code path reads a 16-bit length from the packet, then decrements it by 1 to skip the protocol discriminator byte before passing it to DecodeH323_UserInformation(). If the encoded length is 0, the decrement wraps to -1, which is then passed as a large value to the decoder, leading to an out-of-bounds read. Add a check to ensure len is positive after the decrement.

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xКРИТИЧЕСКАЯ 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-23456

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case In decode_int(), the CONS case calls get_bits(bs, 2) to read a length value, then calls get_uint(bs, len) without checking that len bytes remain in the buffer. The existing boundary check only validates the 2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint() reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte slab-out-of-bounds read. Add a boundary check for len bytes after get_bits() and before get_uint().

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H

Ссылки

CVE-2026-23457

HIGH8.6

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp() sip_help_tcp() parses the SIP Content-Length header with simple_strtoul(), which returns unsigned long, but stores the result in unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are silently truncated before computing the SIP message boundary. For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32, causing the parser to miscalculate where the current message ends. The loop then treats trailing data in the TCP segment as a second SIP message and processes it through the SDP parser. Fix this by changing clen to unsigned long to match the return type of simple_strtoul(), and reject Content-Length values that exceed the remaining TCP payload length.

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 8.6

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H

Ссылки

CVE-2026-23458

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct() ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the conntrack reference immediately after netlink_dump_start(). When the dump spans multiple rounds, the second recvmsg() triggers the dump callback which dereferences the now-freed conntrack via nfct_help(ct), leading to a use-after-free on ct->ext. The bug is that the netlink_dump_control has no .start or .done callbacks to manage the conntrack reference across dump rounds. Other dump functions in the same file (e.g. ctnetlink_get_conntrack) properly use .start/.done callbacks for this purpose. Fix this by adding .start and .done callbacks that hold and release the conntrack reference for the duration of the dump, and move the nfct_help() call after the cb->args[0] early-return check in the dump callback to avoid dereferencing ct->ext unnecessarily. BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0 Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133 CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY Call Trace: ctnetlink_exp_ct_dump_table+0x4f/0x2e0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 ? aa_sk_perm+0x184/0x450 sock_recvmsg+0xde/0xf0 Allocated by task 133: kmem_cache_alloc_noprof+0x134/0x440 __nf_conntrack_alloc+0xa8/0x2b0 ctnetlink_create_conntrack+0xa1/0x900 ctnetlink_new_conntrack+0x3cf/0x7d0 nfnetlink_rcv_msg+0x48e/0x510 netlink_rcv_skb+0xc9/0x1f0 nfnetlink_rcv+0xdb/0x220 netlink_unicast+0x3ec/0x590 netlink_sendmsg+0x397/0x690 __sys_sendmsg+0xf4/0x180 Freed by task 0: slab_free_after_rcu_debug+0xad/0x1e0 rcu_core+0x5c3/0x9c0

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23460

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/rose: fix NULL pointer dereference in rose_transmit_link on reconnect syzkaller reported a bug [1], and the reproducer is available at [2]. ROSE sockets use four sk->sk_state values: TCP_CLOSE, TCP_LISTEN, TCP_SYN_SENT, and TCP_ESTABLISHED. rose_connect() already rejects calls for TCP_ESTABLISHED (-EISCONN) and TCP_CLOSE with SS_CONNECTING (-ECONNREFUSED), but lacks a check for TCP_SYN_SENT. When rose_connect() is called a second time while the first connection attempt is still in progress (TCP_SYN_SENT), it overwrites rose->neighbour via rose_get_neigh(). If that returns NULL, the socket is left with rose->state == ROSE_STATE_1 but rose->neighbour == NULL. When the socket is subsequently closed, rose_release() sees ROSE_STATE_1 and calls rose_write_internal() -> rose_transmit_link(skb, NULL), causing a NULL pointer dereference. Per connect(2), a second connect() while a connection is already in progress should return -EALREADY. Add this missing check for TCP_SYN_SENT to complete the state validation in rose_connect(). [1] https://syzkaller.appspot.com/bug?extid=d00f90e0af54102fb271 [2] https://gist.github.com/mrpre/9e6779e0d13e2c66779b1653fef80516

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23462

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: Fix possible UAF This fixes the following trace caused by not dropping l2cap_conn reference when user->remove callback is called: [ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00 [ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy) [ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 97.809947] Call Trace: [ 97.809954] [ 97.809961] dump_stack_lvl (lib/dump_stack.c:122) [ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808) [ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798) [ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1)) [ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341) [ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2)) [ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360) [ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285) [ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5)) [ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752) [ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716) [ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691) [ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678) [ 97.810404] __fput (fs/file_table.c:470) [ 97.810430] task_work_run (kernel/task_work.c:235) [ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201) [ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5)) [ 97.810527] do_exit (kernel/exit.c:972) [ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810574] ? __pfx_do_exit (kernel/exit.c:897) [ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6)) [ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4)) [ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1)) [ 97.810721] do_group_exit (kernel/exit.c:1093) [ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1)) [ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366) [ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810826] ? vfs_read (fs/read_write.c:555) [ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800) [ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555) [ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810960] arch_do_signal_or_restart (arch/ ---truncated---

Опубликовано: 2026-04-03Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-23463

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: soc: fsl: qbman: fix race condition in qman_destroy_fq When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between fq_table[fq->idx] state and freeing/allocating from the pool and WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered. Indeed, we can have: Thread A Thread B qman_destroy_fq() qman_create_fq() qman_release_fqid() qman_shutdown_fq() gen_pool_free() -- At this point, the fqid is available again -- qman_alloc_fqid() -- so, we can get the just-freed fqid in thread B -- fq->fqid = fqid; fq->idx = fqid * 2; WARN_ON(fq_table[fq->idx]); fq_table[fq->idx] = fq; fq_table[fq->idx] = NULL; And adding some logs between qman_release_fqid() and fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more. To prevent that, ensure that fq_table[fq->idx] is set to NULL before gen_pool_free() is called by using smp_wmb().

Опубликовано: 2026-04-03Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-23474

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mtd: Avoid boot crash in RedBoot partition table parser Given CONFIG_FORTIFY_SOURCE=y and a recent compiler, commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when available") produces the warning below and an oops. Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000 ------------[ cut here ]------------ WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1 memcmp: detected buffer overflow: 15 byte read of buffer size 14 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE As Kees said, "'names' is pointing to the final 'namelen' many bytes of the allocation ... 'namelen' could be basically any length at all. This fortify warning looks legit to me -- this code used to be reading beyond the end of the allocation." Since the size of the dynamic allocation is calculated with strlen() we can use strcmp() instead of memcmp() and remain within bounds.

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31391

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix OOM ->tfm_count leak If memory allocation fails, decrement ->tfm_count to avoid blocking future reads.

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31393

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access l2cap_information_rsp() checks that cmd_len covers the fixed l2cap_info_rsp header (type + result, 4 bytes) but then reads rsp->data without verifying that the payload is present: - L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads 4 bytes past the header (needs cmd_len >= 8). - L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header (needs cmd_len >= 5). A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an out-of-bounds read of adjacent skb data. Guard each data access with the required payload length check. If the payload is too short, skip the read and let the state machine complete with safe defaults (feat_mask and remote_fixed_chan remain zero from kzalloc), so the info timer cleanup and l2cap_conn_start() still run and the connection is not stalled.

Опубликовано: 2026-04-03Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-31396

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use-after-free access to PTP clock PTP clock is registered on every opening of the interface and destroyed on every closing. However it may be accessed via get_ts_info ethtool call which is possible while the interface is just present in the kernel. BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 Read of size 4 at addr ffff8880194345cc by task syz.0.6/948 CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106 print_address_description mm/kasan/report.c:316 [inline] print_report+0x17f/0x496 mm/kasan/report.c:420 kasan_report+0xd9/0x180 mm/kasan/report.c:524 ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349 macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371 __ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558 ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline] __dev_ethtool net/ethtool/ioctl.c:3017 [inline] dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095 dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510 sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215 sock_ioctl+0x577/0x6d0 net/socket.c:1320 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 457: kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:699 [inline] ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235 gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375 macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920 __dev_open+0x2ce/0x500 net/core/dev.c:1501 __dev_change_flags+0x56a/0x740 net/core/dev.c:8651 dev_change_flags+0x92/0x170 net/core/dev.c:8722 do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833 __rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608 rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655 rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150 netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x14b/0x180 net/socket.c:730 __sys_sendto+0x320/0x3b0 net/socket.c:2152 __do_sys_sendto net/socket.c:2164 [inline] __se_sys_sendto net/socket.c:2160 [inline] __x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 938: kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1729 [inline] slab_free_freelist_hook mm/slub.c:1755 [inline] slab_free mm/slub.c:3687 [inline] __kmem_cache_free+0xbc/0x320 mm/slub.c:3700 device_release+0xa0/0x240 drivers/base/core.c:2507 kobject_cleanup lib/kobject.c:681 [inline] kobject_release lib/kobject.c:712 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1cd/0x350 lib/kobject.c:729 put_device+0x1b/0x30 drivers/base/core.c:3805 ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391 gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404 macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966 __dev_close_many+0x1b9/0x310 net/core/dev.c:1585 __dev_close net/core/dev.c:1597 [inline] __dev_change_flags+0x2bb/0x740 net/core/dev.c:8649 dev_change_fl ---truncated---

Опубликовано: 2026-04-03Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31399

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: nvdimm/bus: Fix potential use after free in asynchronous initialization Dingisoul with KASAN reports a use after free if device_add() fails in nd_async_device_register(). Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while scheduling async init") correctly added a reference on the parent device to be held until asynchronous initialization was complete. However, if device_add() results in an allocation failure the ref count of the device drops to 0 prior to the parent pointer being accessed. Thus resulting in use after free. The bug bot AI correctly identified the fix. Save a reference to the parent pointer to be used to drop the parent reference regardless of the outcome of device_add().

Опубликовано: 2026-04-03Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31400

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix cache_request leak in cache_release When a reader's file descriptor is closed while in the middle of reading a cache_request (rp->offset != 0), cache_release() decrements the request's readers count but never checks whether it should free the request. In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the cache_request is removed from the queue and freed along with its buffer and cache_head reference. cache_release() lacks this cleanup. The only other path that frees requests with readers == 0 is cache_dequeue(), but it runs only when CACHE_PENDING transitions from set to clear. If that transition already happened while readers was still non-zero, cache_dequeue() will have skipped the request, and no subsequent call will clean it up. Add the same cleanup logic from cache_read() to cache_release(): after decrementing readers, check if it reached 0 with CACHE_PENDING clear, and if so, dequeue and free the cache_request.

Опубликовано: 2026-04-03Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31402

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request.

Опубликовано: 2026-04-03Изменено: 2026-05-20

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31403

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd The /proc/fs/nfs/exports proc entry is created at module init and persists for the module's lifetime. exports_proc_open() captures the caller's current network namespace and stores its svc_export_cache in seq->private, but takes no reference on the namespace. If the namespace is subsequently torn down (e.g. container destruction after the opener does setns() to a different namespace), nfsd_net_exit() calls nfsd_export_shutdown() which frees the cache. Subsequent reads on the still-open fd dereference the freed cache_detail, walking a freed hash table. Hold a reference on the struct net for the lifetime of the open file descriptor. This prevents nfsd_net_exit() from running -- and thus prevents nfsd_export_shutdown() from freeing the cache -- while any exports fd is open. cache_detail already stores its net pointer (cd->net, set by cache_create_net()), so exports_release() can retrieve it without additional per-file storage.

Опубликовано: 2026-04-03Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31405

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: media: dvb-net: fix OOB access in ULE extension header tables The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables in handle_one_ule_extension() are declared with 255 elements (valid indices 0-254), but the index htype is derived from network-controlled data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When htype equals 255, an out-of-bounds read occurs on the function pointer table, and the OOB value may be called as a function pointer. Add a bounds check on htype against the array size before either table is accessed. Out-of-range values now cause the SNDU to be discarded.

Опубликовано: 2026-04-06Изменено: 2026-05-20

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31411

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix crash due to unvalidated vcc pointer in sigd_send() Reproducer available at [1]. The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc pointer from msg->vcc and uses it directly without any validation. This pointer comes from userspace via sendmsg() and can be arbitrarily forged: int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0); ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon struct msghdr msg = { .msg_iov = &iov, ... }; (unsigned long )(buf + 4) = 0xdeadbeef; // fake vcc pointer sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef In normal operation, the kernel sends the vcc pointer to the signaling daemon via sigd_enq() when processing operations like connect(), bind(), or listen(). The daemon is expected to return the same pointer when responding. However, a malicious daemon can send arbitrary pointer values. Fix this by introducing find_get_vcc() which validates the pointer by searching through vcc_hash (similar to how sigd_close() iterates over all VCCs), and acquires a reference via sock_hold() if found. Since struct atm_vcc embeds struct sock as its first member, they share the same lifetime. Therefore using sock_hold/sock_put is sufficient to keep the vcc alive while it is being used. Note that there may be a race with sigd_close() which could mark the vcc with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns. However, sock_hold() guarantees the memory remains valid, so this race only affects the logical state, not memory safety. [1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3

Опубликовано: 2026-04-08Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31415

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid overflows in ip6_datagram_send_ctl() Yiming Qian reported : I believe I found a locally triggerable kernel bug in the IPv6 sendmsg ancillary-data path that can panic the kernel via `skb_under_panic()` (local DoS). The core issue is a mismatch between: - a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type `__u16`) and - a pointer to the last provided destination-options header (`opt->dst1opt`) when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided. - `include/net/ipv6.h`: - `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible). (lines 291-307, especially 298) - `net/ipv6/datagram.c:ip6_datagram_send_ctl()`: - Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen` without rejecting duplicates. (lines 909-933) - `net/ipv6/ip6_output.c:__ip6_append_data()`: - Uses `opt->opt_flen + opt->opt_nflen` to compute header sizes/headroom decisions. (lines 1448-1466, especially 1463-1465) - `net/ipv6/ip6_output.c:__ip6_make_skb()`: - Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero. (lines 1930-1934) - `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`: - Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the pointed-to header). (lines 1179-1185 and 1206-1211) 1. `opt_flen` is a 16-bit accumulator: - `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr /`. 2. `ip6_datagram_send_ctl()` accepts repeated* `IPV6_DSTOPTS` cmsgs and increments `opt_flen` each time: - In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`: - It computes `len = ((hdr->hdrlen + 1) << 3);` - It checks `CAP_NET_RAW` using `ns_capable(net->user_ns, CAP_NET_RAW)`. (line 922) - Then it does: - `opt->opt_flen += len;` (line 927) - `opt->dst1opt = hdr;` (line 928) There is no duplicate rejection here (unlike the legacy `IPV6_2292DSTOPTS` path which rejects duplicates at `net/ipv6/datagram.c:901-904`). If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps while `dst1opt` still points to a large (2048-byte) destination-options header. In the attached PoC (`poc.c`): - 32 cmsgs with `hdrlen=255` => `len = (255+1)8 = 2048` - 1 cmsg with `hdrlen=0` => `len = 8` - Total increment: `322048 + 8 = 65544`, so `(__u16)opt_flen == 8` - The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header. 3. The transmit path sizes headers using the wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1463-1465`: - `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen + opt->opt_nflen : 0) + ...;` With wrapped `opt_flen`, `headersize`/headroom decisions underestimate what will be pushed later. 4. When building the final skb, the actual push length comes from `dst1opt` and is not limited by wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1930-1934`: - `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);` - In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes `dst1opt` via `ipv6_push_exthdr()`. - In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does: - `skb_push(skb, ipv6_optlen(opt));` - `memcpy(h, opt, ipv6_optlen(opt));` With insufficient headroom, `skb_push()` underflows and triggers `skb_under_panic()` -> `BUG()`: - `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`) - `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`) - The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`). - Root (or any task with `CAP_NET_RAW`) can trigger this without user namespaces. - An unprivileged `uid=1000` user can trigger this if unprivileged user namespaces are enabled and it can create a userns+netns to obtain namespaced `CAP_NET_RAW` (the attached PoC does this). - Local denial of service: kernel BUG/panic (system crash). - ---truncated---

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31416

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: account for netlink header size This is a followup to an old bug fix: NLMSG_DONE needs to account for the netlink header size, not just the attribute size. This can result in a WARN splat + drop of the netlink message, but other than this there are no ill effects.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31417

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix overflow when accumulating packets Add a check to ensure that `x25_sock.fraglen` does not overflow. The `fraglen` also needs to be resetted when purging `fragment_queue` in `x25_clear_queues()`.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31418

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: drop logically empty buckets in mtype_del mtype_del() counts empty slots below n->pos in k, but it only drops the bucket when both n->pos and k are zero. This misses buckets whose live entries have all been removed while n->pos still points past deleted slots. Treat a bucket as empty when all positions below n->pos are unused and release it directly instead of shrinking it further.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31421

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31422

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] =======================================================================

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31423

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: fix divide-by-zero in rtsc_min() m2sm() converts a u32 slope to a u64 scaled value. For large inputs (e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores the difference of two such u64 values in a u32 variable `dsm` and uses it as a divisor. When the difference is exactly 2^32 the truncation yields zero, causing a divide-by-zero oops in the concave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...] Widen `dsm` to u64 and replace do_div() with div64_u64() so the full difference is preserved.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31424

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31425

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rds: ib: reject FRMR registration before IB connection is established rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with i_cm_id = NULL because the connection worker has not yet called rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses the control message before any connection establishment, allowing rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the kernel. The existing guard in rds_ib_reg_frmr() only checks for !ic (added in commit 9e630bcb7701), which does not catch this case since ic is allocated early and is always non-NULL once the connection object exists. KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920 Call Trace: rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167) rds_ib_map_frmr (net/rds/ib_frmr.c:252) rds_ib_reg_frmr (net/rds/ib_frmr.c:430) rds_ib_get_mr (net/rds/ib_rdma.c:615) __rds_rdma_map (net/rds/rdma.c:295) rds_cmsg_rdma_map (net/rds/rdma.c:860) rds_sendmsg (net/rds/send.c:1363) ____sys_sendmsg do_syscall_64 Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all non-NULL before proceeding with FRMR registration, mirroring the guard already present in rds_ib_post_inv(). Return -ENODEV when the connection is not ready, which the existing error handling in rds_cmsg_send() converts to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to start the connection worker.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31427

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp process_sdp() declares union nf_inet_addr rtp_addr on the stack and passes it to the nf_nat_sip sdp_session hook after walking the SDP media descriptions. However rtp_addr is only initialized inside the media loop when a recognized media type with a non-zero port is found. If the SDP body contains no m= lines, only inactive media sections (m=audio 0 ...) or only unrecognized media types, rtp_addr is never assigned. Despite that, the function still calls hooks->sdp_session() with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack value as an IP address and rewrite the SDP session owner and connection lines with it. With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this results in the session-level o= and c= addresses being rewritten to 0.0.0.0 for inactive SDP sessions. Without stack auto-init the rewritten address is whatever happened to be on the stack. Fix this by pre-initializing rtp_addr from the session-level connection address (caddr) when available, and tracking via a have_rtp_addr flag whether any valid address was established. Skip the sdp_session hook entirely when no valid address exists.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31428

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD __build_packet_message() manually constructs the NFULA_PAYLOAD netlink attribute using skb_put() and skb_copy_bits(), bypassing the standard nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes are allocated (including NLA alignment padding), only data_len bytes of actual packet data are copied. The trailing nla_padlen(data_len) bytes (1-3 when data_len is not 4-byte aligned) are never initialized, leaking stale heap contents to userspace via the NFLOG netlink socket. Replace the manual attribute construction with nla_reserve(), which handles the tailroom check, header setup, and padding zeroing via __nla_reserve(). The subsequent skb_copy_bits() fills in the payload data on top of the properly initialized attribute.

Опубликовано: 2026-04-13Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31431

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Revert to operating out-of-place This mostly reverts commit 72548b093ee3 except for the copying of the associated data. There is no benefit in operating in-place in algif_aead since the source and destination come from different mappings. Get rid of all the complexity added for in-place operation and just copy the AD directly.

Опубликовано: 2026-04-22Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31447

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it.

Опубликовано: 2026-04-22Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31450

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer.

Опубликовано: 2026-04-22Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31452

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.

Опубликовано: 2026-04-22Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31454

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid.

Опубликовано: 2026-04-22Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31455

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable.

Опубликовано: 2026-04-22Изменено: 2026-06-05

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31464

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done() A malicious or compromised VIO server can return a num_written value in the discover targets MAD response that exceeds max_targets. This value is stored directly in vhost->num_targets without validation, and is then used as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which is only allocated for max_targets entries. Indices at or beyond max_targets access kernel memory outside the DMA-coherent allocation. The out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI MADs that are sent back to the VIO server, leaking kernel memory. Fix by clamping num_written to max_targets before storing it.

Опубликовано: 2026-04-22Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-31466

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix folio isn't locked in softleaf_to_folio() On arm64 server, we found folio that get from migration entry isn't locked in softleaf_to_folio(). This issue triggers when mTHP splitting and zap_nonpresent_ptes() races, and the root cause is lack of memory barrier in softleaf_to_folio(). The race is as follows: CPU0 CPU1 deferred_split_scan() zap_nonpresent_ptes() lock folio split_folio() unmap_folio() change ptes to migration entries __split_folio_to_order() softleaf_to_folio() set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry)) smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio)) prep_compound_page() for tail pages In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages are visible before the tail page becomes non-compound. smp_wmb() should be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a result, if zap_nonpresent_ptes() accesses migration entry that stores tail pfn, softleaf_to_folio() may see the updated compound_head of tail page before page->flags. This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio() because of the race between folio split and zap_nonpresent_ptes() leading to a folio incorrectly undergoing modification without a folio lock being held. This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further swapops predicates"), which in merged in v6.19-rc1. To fix it, add missing smp_rmb() if the softleaf entry is migration entry in softleaf_to_folio() and softleaf_to_page(). [tujinjiang@huawei.com: update function name and comments]

Опубликовано: 2026-04-22Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31469

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns

Опубликовано: 2026-04-22Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31473

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.

Опубликовано: 2026-04-22Изменено: 2026-04-27

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31485

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove().

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31494

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333 flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff) raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== Fix it by making sure the copied size only considers the active number of queues.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31495

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31497

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: clamp SCO altsetting table indices btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[].

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31498

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED state to support L2CAP reconfiguration (e.g. MTU changes). However, since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from the initial configuration, the reconfiguration path falls through to l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and retrans_list without freeing the previous allocations and sets chan->sdu to NULL without freeing the existing skb. This leaks all previously allocated ERTM resources. Additionally, l2cap_parse_conf_req() does not validate the minimum value of remote_mps derived from the RFC max_pdu_size option. A zero value propagates to l2cap_segment_sdu() where pdu_len becomes zero, causing the while loop to never terminate since len is never decremented, exhausting all available memory. Fix the double-init by skipping l2cap_ertm_init() and l2cap_chan_ready() when the channel is already in BT_CONNECTED state, while still allowing the reconfiguration parameters to be updated through l2cap_parse_conf_req(). Also add a pdu_len zero check in l2cap_segment_sdu() as a safeguard.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31504

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31507

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores the pointer in pipe_buffer.private. The pipe_buf_operations for these buffers used .get = generic_pipe_buf_get, which only increments the page reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv pointer itself was not handled, so after tee() both the original and the cloned pipe_buffer share the same smc_spd_priv *. When both pipes are subsequently released, smc_rx_pipe_buf_release() is called twice against the same object: 1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct] 2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF] KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which then escalates to a NULL-pointer dereference and kernel panic via smc_rx_update_consumer() when it chases the freed priv->smc pointer: BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0 Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74 Call Trace: dump_stack_lvl+0x53/0x70 print_report+0xce/0x650 kasan_report+0xc6/0x100 smc_rx_pipe_buf_release+0x78/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 fput+0x1c6/0x490 x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f BUG: kernel NULL pointer dereference, address: 0000000000000020 RIP: 0010:smc_rx_update_consumer+0x8d/0x350 Call Trace: smc_rx_pipe_buf_release+0x121/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 fput+0x1c6/0x490 x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Beyond the memory-safety problem, duplicating an SMC splice buffer is semantically questionable: smc_rx_update_cons() would advance the consumer cursor twice for the same data, corrupting receive-window accounting. A refcount on smc_spd_priv could fix the double-free, but the cursor-accounting issue would still need to be addressed separately. The .get callback is invoked by both tee(2) and splice_pipe_to_pipe() for partial transfers; both will now return -EFAULT. Users who need to duplicate SMC socket data must use a copy-based read path.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31508

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Avoid releasing netdev before teardown completes The patch cited in the Fixes tag below changed the teardown code for OVS ports to no longer unconditionally take the RTNL. After this change, the netdev_destroy() callback can proceed immediately to the call_rcu() invocation if the IFF_OVS_DATAPATH flag is already cleared on the netdev. The ovs_netdev_detach_dev() function clears the flag before completing the unregistration, and if it gets preempted after clearing the flag (as can happen on an -rt kernel), netdev_destroy() can complete and the device can be freed before the unregistration completes. This leads to a splat like: [ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI [ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT [ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025 [ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0 [ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90 [ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246 [ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000 [ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05 [ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000 [ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006 [ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000 [ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000 [ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0 [ 998.393944] PKRU: 55555554 [ 998.393946] Call Trace: [ 998.393949] [ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch] [ 998.394009] ? __die_body.cold+0x8/0x12 [ 998.394016] ? die_addr+0x3c/0x60 [ 998.394027] ? exc_general_protection+0x16d/0x390 [ 998.394042] ? asm_exc_general_protection+0x26/0x30 [ 998.394058] ? dev_set_promiscuity+0x8d/0xa0 [ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch] [ 998.394092] dp_device_event+0x41/0x80 [openvswitch] [ 998.394102] notifier_call_chain+0x5a/0xd0 [ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60 [ 998.394110] rtnl_dellink+0x169/0x3e0 [ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0 [ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0 [ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0 [ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 998.394132] netlink_rcv_skb+0x50/0x100 [ 998.394138] netlink_unicast+0x292/0x3f0 [ 998.394141] netlink_sendmsg+0x21b/0x470 [ 998.394145] ____sys_sendmsg+0x39d/0x3d0 [ 998.394149] ___sys_sendmsg+0x9a/0xe0 [ 998.394156] __sys_sendmsg+0x7a/0xd0 [ 998.394160] do_syscall_64+0x7f/0x170 [ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 998.394165] RIP: 0033:0x7fad61bf4724 [ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 [ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724 [ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003 [ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f [ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2 ---truncated---

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31509

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix circular locking dependency in nci_close_device nci_close_device() flushes rx_wq and tx_wq while holding req_lock. This causes a circular locking dependency because nci_rx_work() running on rx_wq can end up taking req_lock too: nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete -> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target -> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock) Move the flush of rx_wq after req_lock has been released. This should safe (I think) because NCI_UP has already been cleared and the transport is closed, so the work will see it and return -ENETDOWN. NIPA has been hitting this running the nci selftest with a debug kernel on roughly 4% of the runs.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31510

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb Before using sk pointer, check if it is null. Fix the following: KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267] CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025 Workqueue: events l2cap_info_timeout RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce veth0_macvtap: entered promiscuous mode RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0 PKRU: 55555554 Call Trace: __kasan_check_byte+0x12/0x40 lock_acquire+0x79/0x2e0 lock_sock_nested+0x48/0x100 ? l2cap_sock_ready_cb+0x46/0x160 l2cap_sock_ready_cb+0x46/0x160 l2cap_conn_start+0x779/0xff0 ? __pfx_l2cap_conn_start+0x10/0x10 ? l2cap_info_timeout+0x60/0xa0 ? pfx_mutex_lock+0x10/0x10 l2cap_info_timeout+0x68/0xa0 ? process_scheduled_works+0xa8d/0x18c0 process_scheduled_works+0xb6e/0x18c0 ? __pfx_process_scheduled_works+0x10/0x10 ? assign_work+0x3d5/0x5e0 worker_thread+0xa53/0xfc0 kthread+0x388/0x470 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x51e/0xb90 ? __pfx_ret_from_fork+0x10/0x10 veth1_macvtap: entered promiscuous mode ? __switch_to+0xc7d/0x1450 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Modules linked in: ---[ end trace 0000000000000000 ]--- batman_adv: batadv0: Interface activated: batadv_slave_0 batman_adv: batadv0: Interface activated: batadv_slave_1 netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce ieee80211 phy39: Selected rate control algorithm 'minstrel_ht' RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31512

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv() l2cap_ecred_data_rcv() reads the SDU length field from skb->data using get_unaligned_le16() without first verifying that skb contains at least L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads past the valid data in the skb. The ERTM reassembly path correctly calls pskb_may_pull() before reading the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the same validation to the Enhanced Credit Based Flow Control data path.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31515

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: af_key: validate families in pfkey_send_migrate() syzbot was able to trigger a crash in skb_put() [1] Issue is that pfkey_send_migrate() does not check old/new families, and that set_ipsecrequest() @family argument was truncated, thus possibly overfilling the skb. Validate families early, do not wait set_ipsecrequest(). [1] skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev: kernel BUG at net/core/skbuff.c:214 ! Call Trace: skb_over_panic net/core/skbuff.c:219 [inline] skb_put+0x159/0x210 net/core/skbuff.c:2655 skb_put_zero include/linux/skbuff.h:2788 [inline] set_ipsecrequest net/key/af_key.c:3532 [inline] pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636 km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848 xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705 xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31518

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: esp: fix skb leak with espintcp and async crypto When the TX queue for espintcp is full, esp_output_tail_tcp will return an error and not free the skb, because with synchronous crypto, the common xfrm output code will drop the packet for us. With async crypto (esp_output_done), we need to drop the skb when esp_output_tail_tcp returns an error.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31523

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: ensure we're polling a polled queue A user can change the polled queue count at run time. There's a brief window during a reset where a hipri task may try to poll that queue before the block layer has updated the queue maps, which would race with the now interrupt driven queue and may cause double completions.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31524

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: asus: avoid memory leak in asus_report_fixup() The asus_report_fixup() function was returning a newly allocated kmemdup()-allocated buffer, but never freeing it. Switch to devm_kzalloc() to ensure the memory is managed and freed automatically when the device is removed. The caller of report_fixup() does not take ownership of the returned pointer, but it is permitted to return a pointer whose lifetime is at least that of the input buffer. Also fix a harmless out-of-bounds read by copying only the original descriptor size.

Опубликовано: 2026-04-22Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31545

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: NFC: nxp-nci: allow GPIOs to sleep Allow the firmware and enable GPIOs to sleep. This fixes a `WARN_ON' and allows the driver to operate GPIOs which are connected to I2C GPIO expanders. -- >8 -- kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98 -- >8 --

Опубликовано: 2026-04-24Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31546

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL deref in bond_debug_rlb_hash_show rlb_clear_slave intentionally keeps RLB hash-table entries on the rx_hashtbl_used_head list with slave set to NULL when no replacement slave is available. However, bond_debug_rlb_hash_show visites client_info->slave without checking if it's NULL. Other used-list iterators in bond_alb.c already handle this NULL-slave state safely: - rlb_update_client returns early on !client_info->slave - rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance compare slave values before visiting - lb_req_update_subnet_clients continues if slave is NULL The following NULL deref crash can be trigger in bond_debug_rlb_hash_show: [ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41) [ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286 [ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204 [ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078 [ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000 [ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0 [ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8 [ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000 [ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0 [ 1.295897] Call Trace: [ 1.296134] seq_read_iter (fs/seq_file.c:231) [ 1.296341] seq_read (fs/seq_file.c:164) [ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1)) [ 1.296658] vfs_read (fs/read_write.c:572) [ 1.296981] ksys_read (fs/read_write.c:717) [ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add a NULL check and print "(none)" for entries with no assigned slave.

Опубликовано: 2026-04-24Изменено: 2026-04-28

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31550

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pmdomain: bcm: bcm2835-power: Increase ASB control timeout The bcm2835_asb_control() function uses a tight polling loop to wait for the ASB bridge to acknowledge a request. During intensive workloads, this handshake intermittently fails for V3D's master ASB on BCM2711, resulting in "Failed to disable ASB master for v3d" errors during runtime PM suspend. As a consequence, the failed power-off leaves V3D in a broken state, leading to bus faults or system hangs on later accesses. As the timeout is insufficient in some scenarios, increase the polling timeout from 1us to 5us, which is still negligible in the context of a power domain transition. Also, replace the open-coded ktime_get_ns()/ cpu_relax() polling loop with readl_poll_timeout_atomic().

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31552

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push"), wl1271_tx_allocate() and with it wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails. However, in wlcore_tx_work_locked(), a return value of -EAGAIN from wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being full. This causes the code to flush the buffer, put the skb back at the head of the queue, and immediately retry the same skb in a tight while loop. Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens immediately with GFP_ATOMIC, this will result in an infinite loop and a CPU soft lockup. Return -ENOMEM instead so the packet is dropped and the loop terminates. The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31555

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31570

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: can: gw: fix OOB heap access in cgw_csum_crc8_rel() cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx(): int from = calc_idx(crc8->from_idx, cf->len); int to = calc_idx(crc8->to_idx, cf->len); int res = calc_idx(crc8->result_idx, cf->len); if (from < 0 || to < 0 || res < 0) return; However, the loop and the result write then use the raw s8 fields directly instead of the computed variables: for (i = crc8->from_idx; ...) /* BUG: raw negative index / cf->data[crc8->result_idx] = ...; / BUG: raw negative index */ With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame, calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with i = -64, reading cf->data[-64], and the write goes to cf->data[-64]. This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the start of the canfd_frame on the heap. The companion function cgw_csum_xor_rel() uses `from`/`to`/`res` correctly throughout; fix cgw_csum_crc8_rel() to match. Confirmed with KASAN on linux-7.0-rc2: BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0 Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62 To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31628

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/CPU: Fix FPDSS on Zen1 Zen1's hardware divider can leave, under certain circumstances, partial results from previous operations. Those results can be leaked by another, attacker thread. Fix that with a chicken bit.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31649

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix integer underflow in chain mode The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31651

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix NULL-deref on disconnect Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31658

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31659

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject oversized global TT response buffers batadv_tt_prepare_tvlv_global_data() builds the allocation length for a global TT response in 16-bit temporaries. When a remote originator advertises a large enough global TT, the TT payload length plus the VLAN header offset can exceed 65535 and wrap before kmalloc(). The full-table response path still uses the original TT payload length when it fills tt_change, so the wrapped allocation is too small and batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object before the later packet-size check runs. Fix this by rejecting TT responses whose TVLV value length cannot fit in the 16-bit TVLV payload length field.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31660

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: allocate rx skb before consuming bytes pn532_receive_buf() reports the number of accepted bytes to the serdev core. The current code consumes bytes into recv_skb and may already hand a complete frame to pn533_recv_frame() before allocating a fresh receive buffer. If that alloc_skb() fails, the callback returns 0 even though it has already consumed bytes, and it leaves recv_skb as NULL for the next receive callback. That breaks the receive_buf() accounting contract and can also lead to a NULL dereference on the next skb_put_u8(). Allocate the receive skb lazily before consuming the next byte instead. If allocation fails, return the number of bytes already accepted.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31661

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: Fix dma_free_coherent() size dma_alloc_consistent() may change the size to align it. The new size is saved in alloced. Change the free size to match the allocation size.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31662

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on every inbound group ACK, even when the same member has already acknowledged the current broadcast round. Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to 65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents the underflow path.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31665

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31667

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31668

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: seg6: separate dst_cache for input and output paths in seg6 lwtunnel The seg6 lwtunnel uses a single dst_cache per encap route, shared between seg6_input_core() and seg6_output_core(). These two paths can perform the post-encap SID lookup in different routing contexts (e.g., ip rules matching on the ingress interface, or VRF table separation). Whichever path runs first populates the cache, and the other reuses it blindly, bypassing its own lookup. Fix this by splitting the cache into cache_input and cache_output, so each path maintains its own cached dst independently.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31670

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: prevent unlimited numbers of rfkill events from being created Userspace can create an unlimited number of rfkill events if the system is so configured, while not consuming them from the rfkill file descriptor, causing a potential out of memory situation. Prevent this from bounding the number of pending rfkill events at a "large" number (i.e. 1000) to prevent abuses like this.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31671

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_report() struct xfrm_user_report is a __u8 proto field followed by a struct xfrm_selector which means there is three "empty" bytes of padding, but the padding is never zeroed before copying to userspace. Fix that up by zeroing the structure before setting individual member variables.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31672

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00usb: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the USB anchor lifetime so that it is released on driver unbind.

Опубликовано: 2026-04-24Изменено: 2026-04-27

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31674

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check() Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS. rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[]. Validate addrnr during rule installation so malformed rules are rejected before the match logic can use an out-of-range value.

Опубликовано: 2026-04-25Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-31679

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: openvswitch: validate MPLS set/set_masked payload length validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for SET/SET_MASKED actions. In action handling, OVS expects fixed-size MPLS key data (struct ovs_key_mpls). Use the already normalized key_len (masked case included) and reject non-matching MPLS action key sizes. Reject invalid MPLS action payload lengths early.

Опубликовано: 2026-04-25Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-31680

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: flowlabel: defer exclusive option free until RCU teardown `ip6fl_seq_show()` walks the global flowlabel hash under the seq-file RCU read-side lock and prints `fl->opt->opt_nflen` when an option block is present. Exclusive flowlabels currently free `fl->opt` as soon as `fl->users` drops to zero in `fl_release()`. However, the surrounding `struct ip6_flowlabel` remains visible in the global hash table until later garbage collection removes it and `fl_free_rcu()` finally tears it down. A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that early `kfree()` and dereference freed option state, triggering a crash in `ip6fl_seq_show()`. Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches the lifetime already required for the enclosing flowlabel while readers can still reach it under RCU.

Опубликовано: 2026-04-25Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31682

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: linearize skb before parsing ND options br_nd_send() parses neighbour discovery options from ns->opt[] and assumes that these options are in the linear part of request. Its callers only guarantee that the ICMPv6 header and target address are available, so the option area can still be non-linear. Parsing ns->opt[] in that case can access data past the linear buffer. Linearize request before option parsing and derive ns from the linear network header.

Опубликовано: 2026-04-25Изменено: 2026-05-06

CVSS 3.xКРИТИЧЕСКАЯ 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-31683

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: batman-adv: avoid OGM aggregation when skb tailroom is insufficient When OGM aggregation state is toggled at runtime, an existing forwarded packet may have been allocated with only packet_len bytes, while a later packet can still be selected for aggregation. Appending in this case can hit skb_put overflow conditions. Reject aggregation when the target skb tailroom cannot accommodate the new packet. The caller then falls back to creating a new forward packet instead of appending.

Опубликовано: 2026-04-25Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31687

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gpio: omap: do not register driver in probe() Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the omap_mpuio_driver from omap_mpuio_init(), which is called from omap_gpio_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a potential deadlock condition described in [1]. Additionally, the omap_mpuio_driver is never unregistered from the driver core, even if the module is unloaded. Hence, register the omap_mpuio_driver from the module initcall and unregister it in module_exit().

Опубликовано: 2026-04-27Изменено: 2026-05-06

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31720

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object.

Опубликовано: 2026-05-01Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31721

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well.

Опубликовано: 2026-05-01Изменено: 2026-05-06

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31726

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix NULL pointer dereference during unbind race Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") introduced two stages of synchronization waits totaling 1500ms in uvc_function_unbind() to prevent several types of kernel panics. However, this timing-based approach is insufficient during power management (PM) transitions. When the PM subsystem starts freezing user space processes, the wait_event_interruptible_timeout() is aborted early, which allows the unbind thread to proceed and nullify the gadget pointer (cdev->gadget = NULL): [ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind() [ 814.178583][ T3173] PM: suspend entry (deep) [ 814.192487][ T3173] Freezing user space processes [ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release When the PM subsystem resumes or aborts the suspend and tasks are restarted, the V4L2 release path is executed and attempts to access the already nullified gadget pointer, triggering a kernel panic: [ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake [ 814.386727][ T3173] Restarting tasks ... [ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4 [ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94 [ 814.404078][ T4558] Call trace: [ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4 [ 814.404083][ T4558] usb_function_deactivate+0x54/0x94 [ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c [ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac [ 814.404095][ T4558] v4l2_release+0xcc/0x130 Address the race condition and NULL pointer dereference by: 1. State Synchronization (flag + mutex) Introduce a 'func_unbound' flag in struct uvc_device. This allows uvc_function_disconnect() to safely skip accessing the nullified cdev->gadget pointer. As suggested by Alan Stern, this flag is protected by a new mutex (uvc->lock) to ensure proper memory ordering and prevent instruction reordering or speculative loads. This mutex is also used to protect 'func_connected' for consistent state management. 2. Explicit Synchronization (completion) Use a completion to synchronize uvc_function_unbind() with the uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by ensuring struct uvc_device is freed after all video device resources are released.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31728

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop A race condition between gether_disconnect() and eth_stop() leads to a NULL pointer dereference. Specifically, if eth_stop() is triggered concurrently while gether_disconnect() is tearing down the endpoints, eth_stop() attempts to access the cleared endpoint descriptor, causing the following NPE: Unable to handle kernel NULL pointer dereference Call trace: __dwc3_gadget_ep_enable+0x60/0x788 dwc3_gadget_ep_enable+0x70/0xe4 usb_ep_enable+0x60/0x15c eth_stop+0xb8/0x108 Because eth_stop() crashes while holding the dev->lock, the thread running gether_disconnect() fails to acquire the same lock and spins forever, resulting in a hardlockup: Core - Debugging Information for Hardlockup core(7) Call trace: queued_spin_lock_slowpath+0x94/0x488 _raw_spin_lock+0x64/0x6c gether_disconnect+0x19c/0x1e8 ncm_set_alt+0x68/0x1a0 composite_setup+0x6a0/0xc50 The root cause is that the clearing of dev->port_usb in gether_disconnect() is delayed until the end of the function. Move the clearing of dev->port_usb to the very beginning of gether_disconnect() while holding dev->lock. This cuts off the link immediately, ensuring eth_stop() will see dev->port_usb as NULL and safely bail out.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31737

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31738

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31747

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: comedi: me4000: Fix potential overrun of firmware buffer `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmware loading was totally broken before commit ac584af59945 ("staging: comedi: me4000: fix firmware downloading"), but that is the most sensible target for this fix.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31748

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31749

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31751

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31752

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31758

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31759

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: ulpi: fix double free in ulpi_register_interface() error path When device_register() fails, ulpi_register() calls put_device() on ulpi->dev. The device release callback ulpi_dev_release() drops the OF node reference and frees ulpi, but the current error path in ulpi_register_interface() then calls kfree(ulpi) again, causing a double free. Let put_device() handle the cleanup through ulpi_dev_release() and avoid freeing ulpi again in ulpi_register_interface().

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31761

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Move iio_device_register() to correct location iio_device_register() should be at the end of the probe function to prevent race conditions. Place iio_device_register() at the end of the probe function and place iio_device_unregister() accordingly.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31762

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix irq resource leak The interrupt handler is setup but only a few lines down if iio_trigger_register() fails the function returns without properly releasing the handler. Add cleanup goto to resolve resource leak. Detected by Smatch: drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn: 'irq' from request_threaded_irq() not released on lines: 1124.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31763

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix incorrect free_irq() variable The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq().

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31770

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) Fix division by zero in occ_show_power_1() In occ_show_power_1() case 1, the accumulator is divided by update_tag without checking for zero. If no samples have been collected yet (e.g. during early boot when the sensor block is included but hasn't been updated), update_tag is zero, causing a kernel divide-by-zero crash. The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by zero issue") only addressed occ_get_powr_avg() used by occ_show_power_2() and occ_show_power_a0(). This separate code path in occ_show_power_1() was missed. Fix this by reusing the existing occ_get_powr_avg() helper, which already handles the zero-sample case and uses mul_u64_u32_div() to multiply before dividing for better precision. Move the helper above occ_show_power_1() so it is visible at the call site. [groeck: Fix alignment problems reported by checkpatch]

Опубликовано: 2026-05-01Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31773

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated.

Опубликовано: 2026-05-01Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31778

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix stack out-of-bounds read in init_card The loop creates a whitespace-stripped copy of the card shortname where `len < sizeof(card->id)` is used for the bounds check. Since sizeof(card->id) is 16 and the local id buffer is also 16 bytes, writing 16 non-space characters fills the entire buffer, overwriting the terminating nullbyte. When this non-null-terminated string is later passed to snd_card_set_id() -> copy_valid_id_string(), the function scans forward with `while (*nid && ...)` and reads past the end of the stack buffer, reading the contents of the stack. A USB device with a product name containing many non-ASCII, non-space characters (e.g. multibyte UTF-8) will reliably trigger this as follows: BUG: KASAN: stack-out-of-bounds in copy_valid_id_string sound/core/init.c:696 [inline] BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c sound/core/init.c:718 The off-by-one has been present since commit bafeee5b1f8d ("ALSA: snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1), which first introduced this whitespace-stripping loop. The original code never accounted for the null terminator when bounding the copy. Fix this by changing the loop bound to `sizeof(card->id) - 1`, ensuring at least one byte remains as the null terminator.

Опубликовано: 2026-05-01Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-31780

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation The variable valuesize is declared as u8 but accumulates the total length of all SSIDs to scan. Each SSID contributes up to 33 bytes (IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10) SSIDs the total can reach 330, which wraps around to 74 when stored in a u8. This causes kmalloc to allocate only 75 bytes while the subsequent memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte heap buffer overflow. Widen valuesize from u8 to u32 to accommodate the full range.

Опубликовано: 2026-05-01Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31781

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list.

Опубликовано: 2026-05-01Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-31786

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Buffer overflow in drivers/xen/sys-hypervisor.c The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786

Опубликовано: 2026-04-30Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31787

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: fix double free via VMA splitting privcmd_vm_ops defines .close (privcmd_close), but neither .may_split nor .open. When userspace does a partial munmap() on a privcmd mapping, the kernel splits the VMA via __split_vma(). Since may_split is NULL, the split is allowed. vm_area_dup() copies vm_private_data (a pages array allocated in alloc_empty_pages()) into the new VMA without any fixup, because there is no .open callback. Both VMAs now point to the same pages array. When the unmapped portion is closed, privcmd_close() calls: - xen_unmap_domain_gfn_range() - xen_free_unpopulated_pages() - kvfree(pages) The surviving VMA still holds the dangling pointer. When it is later destroyed, the same sequence runs again, which leads to a double free. Fix this issue by adding a .may_split callback denying the VMA split. This is XSA-487 / CVE-2026-31787

Опубликовано: 2026-04-30Изменено: 2026-05-06

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-31788

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich)

Опубликовано: 2026-03-25Изменено: 2026-04-24

CVSS 3.xВЫСОКАЯ 8.2

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H

Ссылки

CVE-2026-43011

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix potential double free of skb When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at line 48 and returns 1 (error). This error propagates back through the call chain: x25_queue_rx_frame returns 1 | v x25_state3_machine receives the return value 1 and takes the else branch at line 278, setting queued=0 and returning 0 | v x25_process_rx_frame returns queued=0 | v x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb) again This would free the same skb twice. Looking at x25_backlog_rcv: net/x25/x25_in.c:x25_backlog_rcv() { ... queued = x25_process_rx_frame(sk, skb); ... if (!queued) kfree_skb(skb); }

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43014

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: macb: properly unregister fixed rate clocks The additional resources allocated with clk_register_fixed_rate() need to be released with clk_unregister_fixed_rate(), otherwise they are lost.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43015

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix clk handling on PCI glue driver removal platform_device_unregister() may still want to use the registered clks during runtime resume callback. Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free on rmmod") that addressed the similar problem of clk vs platform device unregistration but just moved the bug to another place. Save the pointers to clks into local variables for reuse after platform device is unregistered. BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60 Read of size 8 at addr ffff888104f85e00 by task modprobe/597 CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x8d/0xba print_report+0x17f/0x496 kasan_report+0xd9/0x180 clk_prepare+0x5a/0x60 macb_runtime_resume+0x13d/0x410 [macb] pm_generic_runtime_resume+0x97/0xd0 __rpm_callback+0xc8/0x4d0 rpm_callback+0xf6/0x230 rpm_resume+0xeeb/0x1a70 __pm_runtime_resume+0xb4/0x170 bus_remove_device+0x2e3/0x4b0 device_del+0x5b3/0xdc0 platform_device_del+0x4e/0x280 platform_device_unregister+0x11/0x50 pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 519: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8e/0x90 __clk_register+0x458/0x2890 clk_hw_register+0x1a/0x60 __clk_hw_register_fixed_rate+0x255/0x410 clk_register_fixed_rate+0x3c/0xa0 macb_probe+0x1d8/0x42e [macb_pci] local_pci_probe+0xd7/0x190 pci_device_probe+0x252/0x600 really_probe+0x255/0x7f0 __driver_probe_device+0x1ee/0x330 driver_probe_device+0x4c/0x1f0 __driver_attach+0x1df/0x4e0 bus_for_each_dev+0x15d/0x1f0 bus_add_driver+0x486/0x5e0 driver_register+0x23a/0x3d0 do_one_initcall+0xfd/0x4d0 do_init_module+0x18b/0x5a0 load_module+0x5663/0x7950 __do_sys_finit_module+0x101/0x180 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 597: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x106/0x180 __kmem_cache_free+0xbc/0x320 clk_unregister+0x6de/0x8d0 macb_remove+0x73/0xc0 [macb_pci] pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43020

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate LTK enc_size on load Load Long Term Keys stores the user-provided enc_size and later uses it to size fixed-size stack operations when replying to LE LTK requests. An enc_size larger than the 16-byte key buffer can therefore overflow the reply stack buffer. Reject oversized enc_size values while validating the management LTK record so invalid keys never reach the stored key state.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43024

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43026

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_proto and dir in the else branch, guarded by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when NAT is enabled. Confirmed by priming the expect slab with NAT-bearing expectations, freeing them, creating a new expectation without CTA_EXPECT_NAT, and observing that the ctnetlink dump emits a spurious CTA_EXPECT_NAT containing stale data from the prior allocation.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43027

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free. Pass the actual helper pointer so expectations referencing it are properly destroyed before the helper object is freed. BUG: KASAN: slab-use-after-free in string+0x38f/0x430 Read of size 1 at addr ffff888003b14d20 by task poc/103 Call Trace: string+0x38f/0x430 vsnprintf+0x3cc/0x1170 seq_printf+0x17a/0x240 exp_seq_show+0x2e5/0x560 seq_read_iter+0x419/0x1280 proc_reg_read+0x1ac/0x270 vfs_read+0x179/0x930 ksys_read+0xef/0x1c0 Freed by task 103: The buggy address is located 32 bytes inside of freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43028

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43030

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43032

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: NFC: pn533: bound the UART receive buffer pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43033

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks,

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43035

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43037

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5).

Опубликовано: 2026-05-01Изменено: 2026-05-04

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43038

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xКРИТИЧЕСКАЯ 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43040

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43041

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak __radix_tree_create() allocates and links intermediate nodes into the tree one by one. If a subsequent allocation fails, the already-linked nodes remain in the tree with no corresponding leaf entry. These orphaned internal nodes are never reclaimed because radix_tree_for_each_slot() only visits slots containing leaf values. The radix_tree API is deprecated in favor of xarray. As suggested by Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead of fixing the radix_tree itself [1]. xarray properly handles cleanup of internal nodes — xa_destroy() frees all internal xarray nodes when the qrtr_node is released, preventing the leak. [1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43043

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end of the previous SGL when performing sg_chain() in af_alg_alloc_tsgl().

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43047

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.

Опубликовано: 2026-05-01Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43050

HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converting priv->lecd to an RCU-protected pointer: - Mark priv->lecd as __rcu in lec.h - Use rcu_assign_pointer() in lec_atm_close() and lecd_attach() for safe pointer assignment - Use rcu_access_pointer() for NULL checks that do not dereference the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and lecd_attach() - Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(), lec_handle_bridge() and lec_atm_send() to safely access lecd - Use rcu_assign_pointer() followed by synchronize_rcu() in lec_atm_close() to ensure all readers have completed before proceeding. This is safe since lec_atm_close() is called from vcc_release() which holds lock_sock(), a sleeping lock. - Remove the manual sk_receive_queue drain from lec_atm_close() since vcc_destroy_socket() already drains it after lec_atm_close() returns. v2: Switch from spinlock + sock_hold/put approach to RCU to properly fix the race. The v1 spinlock approach had two issues pointed out by Eric Dumazet: 1. priv->lecd was still accessed directly after releasing the lock instead of using a local copy. 2. The spinlock did not prevent packets being queued after lec_atm_close() drains sk_receive_queue since timer and workqueue paths bypass netif_stop_queue(). Note: Syzbot patch testing was attempted but the test VM terminated unexpectedly with "Connection to localhost closed by remote host", likely due to a QEMU AHCI emulation issue unrelated to this fix. Compile testing with "make W=1 net/atm/lec.o" passes cleanly.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 7.0

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43051

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received.

Опубликовано: 2026-05-01Изменено: 2026-05-07

CVSS 3.xВЫСОКАЯ 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43060

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies.

Опубликовано: 2026-05-05Изменено: 2026-05-22

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43061

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized.

Опубликовано: 2026-05-05Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43062

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp() l2cap_ecred_reconf_rsp() casts the incoming data to struct l2cap_ecred_conn_rsp (the ECRED connection response, 8 bytes with result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes with result at offset 0). This causes two problems: - The sizeof(*rsp) length check requires 8 bytes instead of the correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected with -EPROTO. - rsp->result reads from offset 6 instead of offset 0, returning wrong data when the packet is large enough to pass the check. Fix by using the correct type. Also pass the already byte-swapped result variable to BT_DBG instead of the raw __le16 field.

Опубликовано: 2026-05-05Изменено: 2026-05-29

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:L

Ссылки

CVE-2026-43066

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0.

Опубликовано: 2026-05-05Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43068

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): error count since last fsck: 1 EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760 EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760 ... According to the log analysis, blocks are always requested from the corrupted block group. This may happen as follows: ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return error ext4_lock_group(ac->ac_sb, group); if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable goto out; After commit 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group as corrupt on block bitmap error") is no real solution for allocating blocks from corrupted block groups. This is because if 'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then 'ext4_mb_load_buddy()' may return an error. This means that the block allocation will fail. Therefore, check block group if corrupted when ext4_mb_load_buddy() returns error.

Опубликовано: 2026-05-05Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43069

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid.

Опубликовано: 2026-05-05Изменено: 2026-05-29

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43077

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Fix minimum RX size check for decryption The check for the minimum receive buffer size did not take the tag size into account during decryption. Fix this by adding the required extra length.

Опубликовано: 2026-05-06Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43078

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl When page reassignment was added to af_alg_pull_tsgl the original loop wasn't updated so it may try to reassign one more page than necessary. Add the check to the reassignment so that this does not happen. Also update the comment which still refers to the obsolete offset argument.

Опубликовано: 2026-05-06Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43124

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43130

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_flush_dev_iotlb intel_pasid_tear_down_entry device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fput Although pci_device_is_present() is slower than pci_dev_is_disconnected(), it still takes only ~70 µs on a ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed and width increase. Besides, devtlb_invalidation_with_pasid() is called only in the paths below, which are far less frequent than memory map/unmap. 1. mm-struct release 2. {attach,release}_dev 3. set/remove PASID 4. dirty-tracking setup The gain in system stability far outweighs the negligible cost of using pci_device_is_present() instead of pci_dev_is_disconnected() to decide when to skip ATS invalidation, especially under GDR high-load conditions.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43132

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43134

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE.

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xВЫСОКАЯ 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N

Ссылки

CVE-2026-43135

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Add missing unmap in snd_cx23885_hw_params() In error path, add cx23885_alsa_dma_unmap() to release the resource acquired by cx23885_alsa_dma_map().

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43136

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB.

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43139

HIGH8.6

In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xВЫСОКАЯ 8.6

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H

Ссылки

CVE-2026-43140

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: Do not crash on missing msc->input Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, msc->input stays NULL, leading to a crash at a later time. Detect this condition in the input_configured() hook and reject the device. This is not supposed to happen with actual magic mouse devices, but can be provoked by imposing as a magic mouse USB device.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43141

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43147

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV" This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"), which causes a deadlock by recursively taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of pci_stop_and_remove_bus_device(). For example with the following sequence of commands: $ echo > /sys/bus/pci/devices//sriov_numvfs $ echo 1 > /sys/bus/pci/devices//remove A trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acquire lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140 but task is already holding lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80 ... Call Trace: [<00000259778c4f90>] dump_stack_lvl+0xc0/0x110 [<00000259779c844e>] print_deadlock_bug+0x31e/0x330 [<00000259779c1908>] __lock_acquire+0x16c8/0x32f0 [<00000259779bffac>] lock_acquire+0x14c/0x350 [<00000259789643a6>] __mutex_lock_common+0xe6/0x1520 [<000002597896413c>] mutex_lock_nested+0x3c/0x50 [<00000259784a07e4>] sriov_disable+0x34/0x140 [<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core] [<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core] [<00000259784857fc>] pci_device_remove+0x3c/0xa0 [<000002597851012e>] device_release_driver_internal+0x18e/0x280 [<000002597847ae22>] pci_stop_bus_device+0x82/0xa0 [<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80 [<00000259784972c2>] remove_store+0x72/0x90 [<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200 [<0000025977d7241c>] vfs_write+0x24c/0x300 [<0000025977d72696>] ksys_write+0x86/0x110 [<000002597895b61c>] __do_syscall+0x14c/0x400 [<000002597896e0ee>] system_call+0x6e/0x90 This alone is not a complete fix as it restores the issue the cited commit tried to solve. A new fix will be provided as a follow on.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43149

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean() The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43152

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: hid-pl: handle probe errors Errors in init must be reported back or we'll follow a NULL pointer the first time FF is used.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43156

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: enable basic endpoint checking pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time, and avoid triggering assertion. Similar fix to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") - commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking")

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43158

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: xfs: fix freemap adjustments when adding xattrs to leaf blocks xfs/592 and xfs/794 both trip this assertion in the leaf block freemap adjustment code after ~20 minutes of running on my test VMs: ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t) + xfs_attr3_leaf_hdr_size(leaf)); Upon enabling quite a lot more debugging code, I narrowed this down to fsstress trying to set a local extended attribute with namelen=3 and valuelen=71. This results in an entry size of 80 bytes. At the start of xfs_attr3_leaf_add_work, the freemap looks like this: i 0 base 448 size 0 rhs 448 count 46 i 1 base 388 size 132 rhs 448 count 46 i 2 base 2120 size 4 rhs 448 count 46 firstused = 520 where "rhs" is the first byte past the end of the leaf entry array. This is inconsistent -- the entries array ends at byte 448, but freemap[1] says there's free space starting at byte 388! By the end of the function, the freemap is in worse shape: i 0 base 456 size 0 rhs 456 count 47 i 1 base 388 size 52 rhs 456 count 47 i 2 base 2120 size 4 rhs 456 count 47 firstused = 440 Important note: 388 is not aligned with the entries array element size of 8 bytes. Based on the incorrect freemap, the name area starts at byte 440, which is below the end of the entries array! That's why the assertion triggers and the filesystem shuts down. How did we end up here? First, recall from the previous patch that the freemap array in an xattr leaf block is not intended to be a comprehensive map of all free space in the leaf block. In other words, it's perfectly legal to have a leaf block with: * 376 bytes in use by the entries array * freemap[0] has [base = 376, size = 8] * freemap[1] has [base = 388, size = 1500] * the space between 376 and 388 is free, but the freemap stopped tracking that some time ago If we add one xattr, the entries array grows to 384 bytes, and freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we add a second xattr, the entries array grows to 392 bytes, and freemap[0] gets pushed up to [base = 392, size = 0]. This is bad, because freemap[1] hasn't been updated, and now the entries array and the free space claim the same space. The fix here is to adjust all freemap entries so that none of them collide with the entries array. Note that this fix relies on commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and the previous patch that resets zero length freemap entries to have base = 0.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43159

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix null dereference in find_network The variable pwlan has the possibility of being NULL when passed into rtw_free_network_nolock() which would later dereference the variable.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43163

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: md/bitmap: fix GPF in write_page caused by resize race A General Protection Fault occurs in write_page() during array resize: RIP: 0010:write_page+0x22b/0x3c0 [md_mod] This is a use-after-free race between bitmap_daemon_work() and __bitmap_resize(). The daemon iterates over `bitmap->storage.filemap` without locking, while the resize path frees that storage via md_bitmap_file_unmap(). `quiesce()` does not stop the md thread, allowing concurrent access to freed pages. Fix by holding `mddev->bitmap_info.mutex` during the bitmap update.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43168

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix reflink preserve cleanup issue commit c06c303832ec ("ocfs2: fix xattr array entry __counted_by error") doesn't handle all cases and the cleanup job for preserved xattr entries still has bug: - the 'last' pointer should be shifted by one unit after cleanup an array entry. - current code logic doesn't cleanup the first entry when xh_count is 1. Note, commit c06c303832ec is also a bug fix for 0fe9b66c65f3.

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43171

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't dump the entire memory region The current logic at cper_print_fw_err() doesn't check if the error record length is big enough to handle offset. On a bad firmware, if the ofset is above the actual record, length -= offset will underflow, making it dump the entire memory. The end result can be: - the logic taking a lot of time dumping large regions of memory; - data disclosure due to the memory dumps; - an OOPS, if it tries to dump an unmapped memory region. Fix it by checking if the section length is too small before doing a hex dump. [ rjw: Subject tweaks ]

Опубликовано: 2026-05-06Изменено: 2026-05-13

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43180

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time.

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43183

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix a resource leak in cx25821_dev_setup() Add release_mem_region() if ioremap() fails to release the memory region obtained by cx25821_get_resources().

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43184

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: rnbd-srv: Zero the rsp buffer before using it Before using the data buffer to send back the response message, zero it completely. This prevents any stray bytes to be picked up by the client side when there the message is exchanged between different protocol versions.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Ссылки

CVE-2026-43187

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43190

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_tcpmss: check remaining length before reading optlen Quoting reporter: In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads op[i+1] directly without validating the remaining option length. If the last byte of the option field is not EOL/NOP (0/1), the code attempts to index op[i+1]. In the case where i + 1 == optlen, this causes an out-of-bounds read, accessing memory past the optlen boundary (either reading beyond the stack buffer _opt or the following payload).

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H

Ссылки

CVE-2026-43194

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4MSS:N-3MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok | ok ok ok \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link).

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43196

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np) on the error path. However, after the devm_add_action_or_reset() returns, the of_node_put(clk_mux_np) is called again, causing a double free. Fix by returning directly, to avoid the duplicate of_node_put().

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43202

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: vt8500lcdfb: fix missing dma_free_coherent() fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43203

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: atm: fore200e: fix use-after-free in tasklets during device removal When the PCA-200E or SBA-200E adapter is being detached, the fore200e is deallocated. However, the tx_tasklet or rx_tasklet may still be running or pending, leading to use-after-free bug when the already freed fore200e is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet(). One of the race conditions can occur as follows: CPU 0 (cleanup) | CPU 1 (tasklet) fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | fore200e_tx_tasklet() | fore200e-> // UAF Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to synchronize with any pending or running tasklets. Moreover, since fore200e_reset() could prevent further interrupts or data transfers, the tasklet_kill() should be placed after fore200e_reset() to prevent the tasklet from being rescheduled in fore200e_interrupt(). Finally, it only needs to do tasklet_kill() when the fore200e state is greater than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized in earlier states. In a word, the tasklet_kill() should be placed in the FORE200E_STATE_IRQ branch within the switch...case structure. This bug was identified through static analysis.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43206

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43207

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix error handling in probe function Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent resource leak. Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43209

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: minix: Add required sanity checking to minix_check_superblock() The fs/minix implementation of the minix filesystem does not currently support any other value for s_log_zone_size than 0. This is also the only value supported in util-linux; see mkfs.minix.c line 511. In addition, this patch adds some sanity checking for the other minix superblock fields, and moves the minix_blocks_needed() checks for the zmap and imap also to minix_check_super_block(). This also closes a related syzbot bug report.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43211

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix pci_slot_trylock() error handling Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()") delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in pci_slot_trylock(), but it forgets to remove the corresponding pci_dev_unlock() when pci_bus_trylock() fails. Before a4e772898f8b, the code did: if (!pci_dev_trylock(dev)) /* <- lock bridge device / goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); / <- unlock bridge device */ goto unlock; } } After a4e772898f8b the bridge-device lock is no longer taken, but the pci_dev_unlock(dev) on the failure path was left in place, leading to the bug. This yields one of two errors: 1. A warning that the lock is being unlocked when no one holds it. 2. An incorrect unlock of a lock that belongs to another thread. Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure path. [Same patch later posted by Keith at https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43218

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9903: Fix potential memory leak in tw9903_probe() In one of the error paths in tw9903_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43223

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43226

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/rds: No shortcut out of RDS_CONN_ERROR RDS connections carry a state "rds_conn_path::cp_state" and transitions from one state to another and are conditional upon an expected state: "rds_conn_path_transition." There is one exception to this conditionality, which is "RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop" regardless of what state the condition is currently in. But as soon as a connection enters state "RDS_CONN_ERROR", the connection handling code expects it to go through the shutdown-path. The RDS/TCP multipath changes added a shortcut out of "RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING" via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change"). A subsequent "rds_tcp_reset_callbacks" can then transition the state to "RDS_CONN_RESETTING" with a shutdown-worker queued. That'll trip up "rds_conn_init_shutdown", which was never adjusted to handle "RDS_CONN_RESETTING" and subsequently drops the connection with the dreaded "DR_INV_CONN_STATE", which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever. So we do two things here: a) Don't shortcut "RDS_CONN_ERROR", but take the longer path through the shutdown code. b) Add "RDS_CONN_RESETTING" to the expected states in "rds_conn_init_shutdown" so that we won't error out and get stuck, if we ever hit weird state transitions like this again."

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43227

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_() and clk_() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43230

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/rds: Clear reconnect pending bit When canceling the reconnect worker, care must be taken to reset the reconnect-pending bit. If the reconnect worker has not yet been scheduled before it is canceled, the reconnect-pending bit will stay on forever.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43231

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: radio-keene: fix memory leak in error path Fix a memory leak in usb_keene_probe(). The v4l2 control handler is initialized and controls are added, but if v4l2_device_register() or video_register_device() fails afterward, the handler was never freed, leaking memory. Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure the control handler is properly freed for all error paths after it is initialized.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43232

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets When the FarSync T-series card is being detached, the fst_card_info is deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task may still be running or pending, leading to use-after-free bugs when the already freed fst_card_info is accessed in fst_process_tx_work_q() or fst_process_int_work_q(). A typical race condition is depicted below: CPU 0 (cleanup) | CPU 1 (tasklet) | fst_start_xmit() fst_remove_one() | tasklet_schedule() unregister_hdlc_device()| | fst_process_tx_work_q() //handler kfree(card) //free | do_bottom_half_tx() | card-> //use The following KASAN trace was captured: ================================================================== BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00 Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32 ... Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcb/0x5d0 ? do_bottom_half_tx+0xb88/0xd00 kasan_report+0xb8/0xf0 ? do_bottom_half_tx+0xb88/0xd00 do_bottom_half_tx+0xb88/0xd00 ? _raw_spin_lock_irqsave+0x85/0xe0 ? pfxraw_spin_lock_irqsave+0x10/0x10 ? pfx_hrtimer_run_queues+0x10/0x10 fst_process_tx_work_q+0x67/0x90 tasklet_action_common+0x1fa/0x720 ? hrtimer_interrupt+0x31f/0x780 handle_softirqs+0x176/0x530 __irq_exit_rcu+0xab/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 41 on cpu 3 at 72.330843s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 __kasan_kmalloc+0x7f/0x90 fst_add_one+0x1a5/0x1cd0 local_pci_probe+0xdd/0x190 pci_device_probe+0x341/0x480 really_probe+0x1c6/0x6a0 __driver_probe_device+0x248/0x310 driver_probe_device+0x48/0x210 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x101/0x190 __device_attach+0x198/0x3a0 device_initial_probe+0x78/0xa0 pci_bus_add_device+0x81/0xc0 pci_bus_add_devices+0x7e/0x190 enable_slot+0x9b9/0x1130 acpiphp_check_bridge.part.0+0x2e1/0x460 acpiphp_hotplug_notify+0x36c/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... Freed by task 41 on cpu 1 at 75.138639s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x135/0x410 fst_remove_one+0x2ca/0x540 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0x364/0x530 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device+0xd/0x20 disable_slot+0x116/0x260 acpiphp_disable_and_eject_slot+0x4b/0x190 acpiphp_hotplug_notify+0x230/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... The buggy address belongs to the object at ffff88800aad1000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 28 bytes inside of freed 1024-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x100000000000040(head|node=0|zone=1) page_type: f5(slab) raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88800aad1000: fa fb ---truncated---

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43233

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_choice() In decode_choice(), the boundary check before get_len() uses the variable `len`, which is still 0 from its initialization at the top of the function: unsigned int type, ext, len = 0; ... if (ext || (son->attr & OPEN)) { BYTE_ALIGN(bs); if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here / return H323_ERROR_BOUND; len = get_len(bs); / OOB read / When the bitstream is exactly consumed (bs->cur == bs->end), the check nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end), which is false. The subsequent get_len() call then dereferences bs->cur++, reading 1 byte past the end of the buffer. If that byte has bit 7 set, get_len() reads a second byte as well. This can be triggered remotely by sending a crafted Q.931 SETUP message with a User-User Information Element containing exactly 2 bytes of PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with the nf_conntrack_h323 helper active. The decoder fully consumes the PER buffer before reaching this code path, resulting in a 1-2 byte heap-buffer-overflow read confirmed by AddressSanitizer. Fix this by checking for 2 bytes (the maximum that get_len() may read) instead of the uninitialized `len`. This matches the pattern used at every other get_len() call site in the same file, where the caller checks for 2 bytes of available data before calling get_len().

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xВЫСОКАЯ 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H

Ссылки

CVE-2026-43236

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying the atmel_hlcdc_plane state structure without properly duplicating the drm_plane_state. In particular, state->commit remained set to the old state commit, which can lead to a use-after-free in the next drm_atomic_commit() call. Fix this by calling __drm_atomic_helper_duplicate_plane_state(), which correctly clones the base drm_plane_state (including the ->commit pointer). It has been seen when closing and re-opening the device node while another DRM client (e.g. fbdev) is still attached: ============================================================================= BUG kmalloc-64 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- 0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0 pid=29 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_framebuffer_remove+0x4cc/0x5a8 drm_mode_rmfb_work_fn+0x6c/0x80 process_one_work+0x12c/0x2cc worker_thread+0x2a8/0x400 kthread+0xc0/0xdc ret_from_fork+0x14/0x28 Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0 pid=169 drm_atomic_helper_commit_hw_done+0x100/0x150 drm_atomic_helper_commit_tail+0x64/0x8c commit_tail+0x168/0x18c drm_atomic_helper_commit+0x138/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54 Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0 flags=0x200(workingset|zone=0) Object 0xc611b340 @offset=832 fp=0xc611b7c0

Опубликовано: 2026-05-06Изменено: 2026-05-12

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43241

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43242

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: soc: ti: k3-socinfo: Fix regmap leak on probe failure The mmio regmap allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43246

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9906: Fix potential memory leak in tw9906_probe() In one of the error paths in tw9906_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43251

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: prodikeys: Check presence of pm->input_ep82 Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, pm->input_ep82 stays NULL, which leads to a crash later. This does not happen with the real device, but can be provoked by imposing as one.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43255

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix WARNING in usb_tx_block The function usb_tx_block() submits cardp->tx_urb without ensuring that any previous transmission on this URB has completed. If a second call occurs while the URB is still active (e.g. during rapid firmware loading), usb_submit_urb() detects the active state and triggers a warning: 'URB submitted while active'. Fix this by enforcing serialization: call usb_kill_urb() before submitting the new request. This ensures the URB is idle and safe to reuse.

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43257

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: cx88: Add missing unmap in snd_cx88_hw_params() In error path, add cx88_alsa_dma_unmap() to release resource acquired by cx88_alsa_dma_map().

Опубликовано: 2026-05-06Изменено: 2026-05-11

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43261

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64: Add support for TSV110 Spectre-BHB mitigation The TSV110 processor is vulnerable to the Spectre-BHB (Branch History Buffer) attack, which can be exploited to leak information through branch prediction side channels. This commit adds the MIDR of TSV110 to the list for software mitigation.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43264

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: of: display_timing: fix refcount leak in of_get_display_timings() of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43266

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 [ rjw: Subject and changelog tweaks ]

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43268

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hfsplus: pretend special inodes as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43269

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback After several commits, the slab memory increases. Some drm_crtc_commit objects are not freed. The atomic_destroy_state callback only put the framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function to put all the objects that are no longer needed. It has been seen after hours of usage of a graphics application or using kmemleak: unreferenced object 0xc63a6580 (size 64): comm "egt_basic", pid 171, jiffies 4294940784 hex dump (first 32 bytes): 40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:. 8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:. backtrace (crc c25aa925): kmemleak_alloc+0x34/0x3c __kmalloc_cache_noprof+0x150/0x1a4 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43270

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove() In mtk_mdp_probe(), vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43273

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ceph: supply snapshot context in ceph_zero_partial_object() The ceph_zero_partial_object function was missing proper snapshot context for its OSD write operations, which could lead to data inconsistencies in snapshots. Reproducer: ../src/vstart.sh --new -x --localhost --bluestore ./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a' mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1 mkdir /mnt/mycephfs/.snap/snap1 md5sum /mnt/mycephfs/.snap/snap1/foo fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo echo 3 > /proc/sys/vm/drop/caches md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!!

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43277

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ensure that won't go past CPER allocated record The logic at ghes_new() prevents allocating too large records, by checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB). Yet, the allocation is done with the actual number of pages from the CPER bios table location, which can be smaller. Yet, a bad firmware could send data with a different size, which might be bigger than the allocated memory, causing an OOPS: Unable to handle kernel paging request at virtual address fff00000f9b40000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000 [fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 Workqueue: kacpi_notify acpi_os_execute_deferred pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : hex_dump_to_buffer+0x30c/0x4a0 lr : hex_dump_to_buffer+0x328/0x4a0 sp : ffff800080e13880 x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083 x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004 x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083 x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010 x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020 x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008 x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020 x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000 x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008 Call trace: hex_dump_to_buffer+0x30c/0x4a0 (P) print_hex_dump+0xac/0x170 cper_estatus_print_section+0x90c/0x968 cper_estatus_print+0xf0/0x158 __ghes_print_estatus+0xa0/0x148 ghes_proc+0x1bc/0x220 ghes_notify_hed+0x5c/0xb8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x80 acpi_hed_notify+0x28/0x40 acpi_ev_notify_dispatch+0x50/0x80 acpi_os_execute_deferred+0x24/0x48 process_one_work+0x15c/0x3b0 worker_thread+0x2d0/0x400 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44) ---[ end trace 0000000000000000 ]--- Prevent that by taking the actual allocated are into account when checking for CPER length. [ rjw: Subject tweaks ]

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43283

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ec_bhf: Fix dma_free_coherent() dma handle dma_free_coherent() in error path takes priv->rx_buf.alloc_len as the dma handle. This would lead to improper unmapping of the buffer. Change the dma handle to priv->rx_buf.alloc_phys.

Опубликовано: 2026-05-06Изменено: 2026-05-08

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

Ссылки

CVE-2026-43284

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: avoid in-place decrypt on shared skb frags MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(), so later paths that may modify packet data can first make a private copy. The IPv4/IPv6 datagram append paths did not set this flag when splicing pages into UDP skbs. That leaves an ESP-in-UDP packet made from shared pipe pages looking like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW fast path for uncloned skbs without a frag_list and decrypts in place over data that is not owned privately by the skb. Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching TCP. Also make ESP input fall back to skb_cow_data() when the flag is present, so ESP does not decrypt externally backed frags in place. Private nonlinear skb frags still use the existing fast path. This intentionally does not change ESP output. In esp_output_head(), the path that appends the ESP trailer to existing skb tailroom without calling skb_cow_data() is not reachable for nonlinear skbs: skb_tailroom() returns zero when skb->data_len is nonzero, while ESP tailen is positive. Thus ESP output will either use the separate destination-frag path or fall back to skb_cow_data().

Опубликовано: 2026-05-08Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

Ссылки

CVE-2026-43287

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm: Account property blob allocations to memcg DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kernel memory growth without introducing additional policy or per-file limits.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43289

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: kexec: derive purgatory entry from symbol kexec_load_purgatory() derives image->start by locating e_entry inside an SHF_EXECINSTR section. If the purgatory object contains multiple executable sections with overlapping sh_addr, the entrypoint check can match more than once and trigger a WARN. Derive the entry section from the purgatory_start symbol when present and compute image->start from its final placement. Keep the existing e_entry fallback for purgatories that do not expose the symbol. WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784 Call Trace: bzImage64_load+0x133/0xa00 __do_sys_kexec_file_load+0x2b3/0x5c0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e [me@linux.beauty: move helper to avoid forward declaration, per Baoquan]

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43295

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net() When idtab allocation fails, net is not registered with rio_add_net() yet, so kfree(net) is sufficient to release the memory. Set mport->net to NULL to avoid dangling pointer.

Опубликовано: 2026-05-08Изменено: 2026-05-14

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43296

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit drops by keeping the control-flow clock enabled: - Set TM9 (bit 21) These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this configuration the SQM/PSE maintain forward progress under load without credit loss, at the cost of disabling sticky optimizations.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43314

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-timeout-fail to dm echo 1 >/sys/class/block/dm-0/io-timeout-fail echo 100 >/sys/kernel/debug/fail_io_timeout/probability echo 10 >/sys/kernel/debug/fail_io_timeout/times 3. read/write dm 4. iscsiadm -m node -u Result: hang task like below [ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds. [ 862.244133] Tainted: G E 6.19.0-rc1+ #51 [ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000 [ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi] [ 862.245264] Call Trace: [ 862.245587] [ 862.245814] __schedule+0x810/0x15c0 [ 862.246557] schedule+0x69/0x180 [ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120 [ 862.247688] elevator_change+0x16d/0x460 [ 862.247893] elevator_set_none+0x87/0xf0 [ 862.248798] blk_unregister_queue+0x12e/0x2a0 [ 862.248995] __del_gendisk+0x231/0x7e0 [ 862.250143] del_gendisk+0x12f/0x1d0 [ 862.250339] sd_remove+0x85/0x130 [sd_mod] [ 862.250650] device_release_driver_internal+0x36d/0x530 [ 862.250849] bus_remove_device+0x1dd/0x3f0 [ 862.251042] device_del+0x38a/0x930 [ 862.252095] __scsi_remove_device+0x293/0x360 [ 862.252291] scsi_remove_target+0x486/0x760 [ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi] [ 862.252886] process_one_work+0x633/0xe50 [ 862.253101] worker_thread+0x6df/0xf10 [ 862.253647] kthread+0x36d/0x720 [ 862.254533] ret_from_fork+0x2a6/0x470 [ 862.255852] ret_from_fork_asm+0x1a/0x30 [ 862.256037] Remove the blk_should_fake_timeout() check from dm, as dm has no native timeout handling and should not attempt to fake timeouts.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43316

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added at all since everything is known to be within bounds. Additionally use an unsigned value for the shift to remove the instrumentation even without the explicit bounds checking. [hverkuil: fix checkpatch warning for is_tw286x]

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43327

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43328

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release().

Опубликовано: 2026-05-08Изменено: 2026-06-01

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43334

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xВЫСОКАЯ 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43336

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: chacha: Zeroize permuted_state before it leaves scope Since the ChaCha permutation is invertible, the local variable 'permuted_state' is sufficient to compute the original 'state', and thus the key, even after the permutation has been done. While the kernel is quite inconsistent about zeroizing secrets on the stack (and some prominent userspace crypto libraries don't bother at all since it's not guaranteed to work anyway), the kernel does try to do it as a best practice, especially in cases involving the RNG. Thus, explicitly zeroize 'permuted_state' before it goes out of scope.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Ссылки

CVE-2026-43339

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UaF in addrconf_permanent_addr() The mentioned helper try to warn the user about an exceptional condition, but the message is delivered too late, accessing the ipv6 after its possible deletion. Reorder the statement to avoid the possible UaF; while at it, place the warning outside the idev->lock as it needs no protection.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43340

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: comedi: Reinit dev->spinlock between attachments to low-level drivers `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can be attached to different low-level drivers over their lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in inconsistent lock states being reported when there is a mismatch in the spin-lock locking levels used by each low-level driver to which the COMEDI device has been attached. Fix it by reinitializing `dev->spinlock` before calling the low-level driver's `attach` function pointer if `CONFIG_LOCKDEP` is enabled.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43342

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection.

Опубликовано: 2026-05-08Изменено: 2026-05-18

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43343

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup.

Опубликовано: 2026-05-08Изменено: 2026-05-18

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43355

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43357

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050-core: fix pm_runtime error handling The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43363

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43370

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43373

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: ncsi: fix skb leak in error paths Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed.

Опубликовано: 2026-05-08Изменено: 2026-05-15

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43381

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening.

Опубликовано: 2026-05-08Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43382

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called.

Опубликовано: 2026-05-08Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43383

CRITICAL9.4

In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

Опубликовано: 2026-05-08Изменено: 2026-05-26

CVSS 3.xКРИТИЧЕСКАЯ 9.4

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H

Ссылки

CVE-2026-43386

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

Опубликовано: 2026-05-08Изменено: 2026-05-26

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43387

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it

Опубликовано: 2026-05-08Изменено: 2026-05-26

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43407

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? pfxraw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? pfxraw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? pfxraw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ]

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xКРИТИЧЕСКАЯ 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43411

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set conn_timeout to any value via setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in tipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4); If conn_timeout is in the range [0, 3], the integer division yields 0, and the modulo operation triggers a divide-by-zero exception, causing a kernel oops/panic. Fix this by clamping conn_timeout to a minimum of 4 at the point of use in tipc_sk_filter_connect(). Oops: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+ RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362) Call Trace: tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406) __release_sock (include/net/sock.h:1185 net/core/sock.c:3213) release_sock (net/core/sock.c:3797) tipc_connect (net/tipc/socket.c:2570) __sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43420

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: ceph: fix i_nlink underrun during async unlink During async unlink, we drop the `i_nlink` counter before we receive the completion (that will eventually update the `i_nlink`) because "we assume that the unlink will succeed". That is not a bad idea, but it races against deletions by other clients (or against the completion of our own unlink) and can lead to an underrun which emits a WARNING like this one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655 Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drop_nlink+0x50/0x68 lr : ceph_unlink+0x6c4/0x720 sp : ffff80012173bc90 x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680 x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647 x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203 x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365 x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74 x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94 x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002 x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8 Call trace: drop_nlink+0x50/0x68 (P) vfs_unlink+0xb0/0x2e8 do_unlinkat+0x204/0x288 __arm64_sys_unlinkat+0x3c/0x80 invoke_syscall.constprop.0+0x54/0xe8 do_el0_svc+0xa4/0xc8 el0_svc+0x18/0x58 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x154/0x158 In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion. Meanwhile, between this call and the following drop_nlink() call, a worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own completion). These will lead to a set_nlink() call, updating the `i_nlink` counter to the value received from the MDS. If that new `i_nlink` value happens to be zero, it is illegal to decrement it further. But that is exactly what ceph_unlink() will do then. The WARNING can be reproduced this way: 1. Force async unlink; only the async code path is affected. Having no real clue about Ceph internals, I was unable to find out why the MDS wouldn't give me the "Fxr" capabilities, so I patched get_caps_for_async_unlink() to always succeed. (Note that the WARNING dump above was found on an unpatched kernel, without this kludge - this is not a theoretical bug.) 2. Add a sleep call after ceph_mdsc_submit_request() so the unlink completion gets handled by a worker thread before drop_nlink() is called. This guarantees that the `i_nlink` is already zero before drop_nlink() runs. The solution is to skip the counter decrement when it is already zero, but doing so without a lock is still racy (TOCTOU). Since ceph_fill_inode() and handle_cap_grant() both hold the `ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this seems like the proper lock to protect the `i_nlink` updates. I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using `afs_vnode.cb_lock`). All three have the zero check as well.

Опубликовано: 2026-05-08Изменено: 2026-05-22

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43424

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically managed and tied to userspace configuration via ConfigFS. It can be NULL if the USB host sends requests before the nexus is fully established or immediately after it is dropped. Currently, functions like `bot_submit_command()` and the data transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately dereference `tv_nexus->tvn_se_sess` without any validation. If a malicious or misconfigured USB host sends a BOT (Bulk-Only Transport) command during this race window, it triggers a NULL pointer dereference, leading to a kernel panic (local DoS). This exposes an inconsistent API usage within the module, as peer functions like `usbg_submit_command()` and `bot_send_bad_response()` correctly implement a NULL check for `tv_nexus` before proceeding. Fix this by bringing consistency to the nexus handling. Add the missing `if (!tv_nexus)` checks to the vulnerable BOT command and request processing paths, aborting the command gracefully with an error instead of crashing the system.

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43425

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit 372c93131998 ("USB: yurex: fix control-URB timeout handling") - commit b98d5000c505 ("media: rc: iguanair: handle timeouts")

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43426

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called.

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43427

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43428

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout.

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43429

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely.

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43430

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data.

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43432

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime.

Опубликовано: 2026-05-08Изменено: 2026-05-20

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43437

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() In the drain loop, the local variable 'runtime' is reassigned to a linked stream's runtime (runtime = s->runtime at line 2157). After releasing the stream lock at line 2169, the code accesses runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size (lines 2170-2178) — all referencing the linked stream's runtime without any lock or refcount protecting its lifetime. A concurrent close() on the linked stream's fd triggers snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private() → snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime). No synchronization prevents kfree(runtime) from completing while the drain path dereferences the stale pointer. Fix by caching the needed runtime fields (no_period_wakeup, rate, buffer_size) into local variables while still holding the stream lock, and using the cached values after the lock is released.

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43439

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as well as tasks queued on cset->mg_tasks, can be skipped by iteration. Fix this by calling css_set_skip_task_iters() before unlinking task->cg_list from cset->tasks. This advances all active iterators to the next task on cset->tasks, so iteration continues correctly even when a task is concurrently being migrated. This race is hard to hit in practice without instrumentation, but it can be reproduced by artificially slowing down cgroup_procs_show(). For example, on an Android device a temporary /sys/kernel/cgroup/cgroup_test knob can be added to inject a delay into cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file. Under this setup, cgroup.procs can intermittently show only PID 101 while skipping PID 103. Once the migration completes, reading the file again shows all tasks as expected. Note that this change does not allow removing the existing css_set_skip_task_iters() call in css_set_move_task(). The new call in cgroup_migrate_add_task() only handles iterators that are racing with migration while the task is still on cset->tasks. Iterators may also start after the task has been moved to cset->mg_tasks. If we dropped css_set_skip_task_iters() from css_set_move_task(), such iterators could keep task_pos pointing to a migrating task, causing css_task_iter_advance() to malfunction on the destination css_set, up to and including crashes or infinite loops. The race window between migration and iteration is very small, and css_task_iter is not on a hot path. In the worst case, when an iterator is positioned on the first thread of the migrating process, cgroup_migrate_add_task() may have to skip multiple tasks via css_set_skip_task_iters(). However, this only happens when migration and iteration actually race, so the performance impact is negligible compared to the correctness fix provided here.

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xСРЕДНЯЯ 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43445

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch.

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43449

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff) page_type: f5(slab) raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 000fffffc0000040 ffff888001042000 00000 ---truncated---

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43450

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43451

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue entry from the queue data structures, taking ownership of the entry. For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN present but NFQA_VLAN_TCI missing), the function returns immediately without freeing the dequeued entry or its sk_buff. This leaks the nf_queue_entry, its associated sk_buff, and all held references (net_device refcounts, struct net refcount). Repeated triggering exhausts kernel memory. Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict on the error path, consistent with other error handling in this file.

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43452

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: guard option walkers against 1-byte tail reads When the last byte of options is a non-single-byte option kind, walkers that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end of the option area. Add an explicit i == optlen - 1 check before dereferencing op[i + 1] in xt_tcpudp and xt_dccp option walkers.

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H

Ссылки

CVE-2026-43453

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid the out-of-bounds read.

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

Ссылки

CVE-2026-43458

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: serial: caif: hold tty->link reference in ldisc_open and ser_release A reproducer triggers a KASAN slab-use-after-free in pty_write_room() when caif_serial's TX path calls tty_write_room(). The faulting access is on tty->link->port. Hold an extra kref on tty->link for the lifetime of the caif_serial line discipline: get it in ldisc_open() and drop it in ser_release(), and also drop it on the ldisc_open() error path. With this change applied, the reproducer no longer triggers the UAF in my testing.

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43459

HIGH7.3

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: flush delayed work before removing DAIs and widgets When a sound card is unbound while a PCM stream is open, a use-after-free can occur in snd_soc_dapm_stream_event(), called from the close_delayed_work workqueue handler. During unbind, snd_soc_unbind_card() flushes delayed work and then calls soc_cleanup_card_resources(). Inside cleanup, snd_card_disconnect_sync() releases all PCM file descriptors, and the resulting PCM close path can call snd_soc_dapm_stream_stop() which schedules new delayed work with a pmdown_time timer delay. Since this happens after the flush in snd_soc_unbind_card(), the new work is not caught. soc_remove_link_components() then frees DAPM widgets before this work fires, leading to the use-after-free. The existing flush in soc_free_pcm_runtime() also cannot help as it runs after soc_remove_link_components() has already freed the widgets. Add a flush in soc_cleanup_card_resources() after snd_card_disconnect_sync() (after which no new PCM closes can schedule further delayed work) and before soc_remove_link_dais() and soc_remove_link_components() (which tear down the structures the delayed work accesses).

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 7.3

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H

Ссылки

CVE-2026-43466

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 asm_common_interrupt+0x22/0x40

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xВЫСОКАЯ 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H

Ссылки

CVE-2026-43472

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: unshare: fix unshare_fs() handling There's an unpleasant corner case in unshare(2), when we have a CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that case copy_mnt_ns() gets passed current->fs instead of a private copy, which causes interesting warts in proof of correctness] > I guess if private means fs->users == 1, the condition could still be true. Unfortunately, it's worse than just a convoluted proof of correctness. Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS (and current->fs->users == 1). We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and flips current->fs->{pwd,root} to corresponding locations in the new namespace. Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM). We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's destroyed and its mount tree is dissolved, but... current->fs->root and current->fs->pwd are both left pointing to now detached mounts. They are pinning those, so it's not a UAF, but it leaves the calling process with unshare(2) failing with -ENOMEM _and_ leaving it with pwd and root on detached isolated mounts. The last part is clearly a bug. There is other fun related to that mess (races with pivot_root(), including the one between pivot_root() and fork(), of all things), but this one is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new fs_struct even if it hadn't been shared in the first place". Sure, we could go for something like "if both CLONE_NEWNS and one of the things that might end up failing after copy_mnt_ns() call in create_new_namespaces() are set, force allocation of new fs_struct", but let's keep it simple - the cost of copy_fs_struct() is trivial. Another benefit is that copy_mnt_ns() with CLONE_NEWNS always gets a freshly allocated fs_struct, yet to be attached to anything. That seriously simplifies the analysis... FWIW, that bug had been there since the introduction of unshare(2) ;-/

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

CVE-2026-43475

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT This resolves the follow splat and lock-up when running with PREEMPT_RT enabled on Hyper-V: [ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002 [ 415.140822] INFO: lockdep is turned off. [ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common [ 415.140846] Preemption disabled at: [ 415.140847] [] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)} [ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024 [ 415.140857] Call Trace: [ 415.140861] [ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140863] dump_stack_lvl+0x91/0xb0 [ 415.140870] __schedule_bug+0x9c/0xc0 [ 415.140875] __schedule+0xdf6/0x1300 [ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980 [ 415.140879] ? rcu_is_watching+0x12/0x60 [ 415.140883] schedule_rtlock+0x21/0x40 [ 415.140885] rtlock_slowlock_locked+0x502/0x1980 [ 415.140891] rt_spin_lock+0x89/0x1e0 [ 415.140893] hv_ringbuffer_write+0x87/0x2a0 [ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0 [ 415.140900] ? rcu_is_watching+0x12/0x60 [ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc] [ 415.140904] ? HARDIRQ_verbose+0x10/0x10 [ 415.140908] ? __rq_qos_issue+0x28/0x40 [ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod] [ 415.140926] __blk_mq_issue_directly+0x4a/0xc0 [ 415.140928] blk_mq_issue_direct+0x87/0x2b0 [ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440 [ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0 [ 415.140935] __blk_flush_plug+0xf4/0x150 [ 415.140940] __submit_bio+0x2b2/0x5c0 [ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360 [ 415.140946] submit_bio_noacct_nocheck+0x272/0x360 [ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4] [ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4] [ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4] [ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4] [ 415.141060] generic_perform_write+0x14e/0x2c0 [ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4] [ 415.141083] vfs_write+0x2ca/0x570 [ 415.141087] ksys_write+0x76/0xf0 [ 415.141089] do_syscall_64+0x99/0x1490 [ 415.141093] ? rcu_is_watching+0x12/0x60 [ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0 [ 415.141097] ? rcu_is_watching+0x12/0x60 [ 415.141098] ? lock_release+0x1f0/0x2a0 [ 415.141100] ? rcu_is_watching+0x12/0x60 [ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0 [ 415.141103] ? rcu_is_watching+0x12/0x60 [ 415.141104] ? __schedule+0xb34/0x1300 [ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170 [ 415.141109] ? do_nanosleep+0x8b/0x160 [ 415.141111] ? hrtimer_nanosleep+0x89/0x100 [ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 415.141116] ? xfd_validate_state+0x26/0x90 [ 415.141118] ? rcu_is_watching+0x12/0x60 [ 415.141120] ? do_syscall_64+0x1e0/0x1490 [ 415.141121] ? do_syscall_64+0x1e0/0x1490 [ 415.141123] ? rcu_is_watching+0x12/0x60 [ 415.141124] ? do_syscall_64+0x1e0/0x1490 [ 415.141125] ? do_syscall_64+0x1e0/0x1490 [ 415.141127] ? irqentry_exit+0x140/0 ---truncated---

Опубликовано: 2026-05-08Изменено: 2026-05-21

CVSS 3.xСРЕДНЯЯ 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Ссылки

GHSA-m38g-vww2-mvgx

HIGH7.5

Talos Linux has a local privilege escalation from untrusted workloads

Опубликовано: 2026-05-07Изменено: 2026-06-08

CVSS 3.xВЫСОКАЯ 7.5

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:N

Ссылки

Обновление пакета kernel-image-std-def в ветке c9f2

Закрытые проблемы (332)

Уязвимость функции nv3_arb() модуля drivers/video/fbdev/riva/riva_hw.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции dvb_ringbuffer_init() модуля drivers/media/dvb-core/dmxdev.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции act_gate() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции icmp_tag_validation() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции sigd_send() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента NFSv4.0 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента sunrpc ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента NFSD ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции nd_async_device_register() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость модуля для реализации AEAD-алгоритмов algif_aead ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии

Уязвимость компонента xfrm ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии до уровня root

Уязвимость функции tc_chain_fill_node() ядра операционных систем Linux, позволяющая нарушителю получить несанкционированный доступ к конфиденциальной информации

Уязвимость функции pn532_receive_buf() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ctnetlink_alloc_expect() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию

Уязвимость функции nft_queue() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции regsafe() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию или вызвать отказ в обслуживании

Уязвимость модуля crypto/authencesn.c ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость модуля drivers/net/ethernet/cadence/macb_pci.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции verify_dfa() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq() Fix a user triggerable leak on the system call failure path.

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Fix a locking bug Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix OOM ->tfm_count leak If memory allocation fails, decrement ->tfm_count to avoid blocking future reads.

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix overflow when accumulating packets Add a check to ensure that `x25_sock.fraglen` does not overflow. The `fraglen` also needs to be resetted when purging `fragment_queue` in `x25_clear_queues()`.

In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it.