MEDIUM5.5
Уязвимость функции sigd_send() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HCVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
ALT-PU-2026-4748-11Обновление пакета kernel-image-6.18 в ветке sisyphus
Серьёзность:
Закрытые проблемы (157)
CRITICAL9.1
Уязвимость модулей net/ipv4/icmp.c и net/ipv6/icmp.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании
CVSS 3.xКРИТИЧЕСКАЯ 9.1
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:HCVSS 2.0КРИТИЧЕСКАЯ 9.4
CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:C/A:CMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/ambient _ # cat /proc/$$/attr/smack/current _ # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms # echo foo >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms unknown option 86 # echo 4 >/smack/doi # echo 3 >/smack/doi !> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17 # echo 3 >/smack/doi !> [ 249.402261] smk_cipso_doi:678 remove rc = -2 !> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17 # ping -c1 10.1.95.12 !!> ping: 10.1.95.12: Address family for hostname not supported # echo _ >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms This happens because Smack keeps decommissioned DOIs, fails to re-add them, and consequently refuses to add the “default” domain map: # netlabelctl -p cipso list Configured CIPSO mappings (2) DOI value : 3 mapping type : PASS_THROUGH DOI value : 4 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (2) domain: "_" (IPv4) protocol: UNLABELED !> (no ipv4 map for default domain here) domain: DEFAULT (IPv6) protocol: UNLABELED Fix by clearing decommissioned DOI definitions and serializing concurrent DOI updates with a new lock. Also: - allow /smack/doi to live unconfigured, since adding a map (netlbl_cfg_cipsov4_map_add) may fail. CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI - add new DOI before removing the old default map, so the old map remains if the add fails (2008-02-04, Casey Schaufler)
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/199452f22d2f74b897fe826f81ec402b0a8461a0
- https://git.kernel.org/stable/c/1c7ee23dfcd18d80770d8f90f2ab5bb1b2bfd8a3
- https://git.kernel.org/stable/c/33d589ed60ae433b483761987b85e0d24e54584e
- https://git.kernel.org/stable/c/5a247a84de0ba44edbbd6be851c8a6b2aa60ff85
- https://git.kernel.org/stable/c/6ec091c5c7eeabd249a7c46813cad1e9f555f859
- https://git.kernel.org/stable/c/8beebb8ad9a003f978e53b06237986588223e15e
- https://git.kernel.org/stable/c/eb718a3c8181ada679340db34cd61bce48e44749
- https://git.kernel.org/stable/c/f8071500177f38cff38892bd85ac631cc6e010b2
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Initialize new folios before use KMSAN reports an uninitialized value in longest_match_std(), invoked from ntfs_compress_write(). When new folios are allocated without being marked uptodate and ni_read_frame() is skipped because the caller expects the frame to be completely overwritten, some reserved folios may remain only partially filled, leaving the rest memory uninitialized.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Recover from panthor_gpu_flush_caches() failures We have seen a few cases where the whole memory subsystem is blocked and flush operations never complete. When that happens, we want to: - schedule a reset, so we can recover from this situation - in the reset path, we need to reset the pending_reqs so we can send new commands after the reset - if more panthor_gpu_flush_caches() operations are queued after the timeout, we skip them and return -EIO directly to avoid needless waits (the memory block won't miraculously work again) Note that we drop the WARN_ON()s because these hangs can be triggered with buggy GPU jobs created by the UMD, and there's no way we can prevent it. We do keep the error messages though. v2: - New patch v3: - Collect R-b - Explicitly mention the fact we dropped the WARN_ON()s in the commit message v4: - No changes
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nf_tables_addchain() nf_tables_addchain() publishes the chain to table->chains via list_add_tail_rcu() (in nft_chain_add()) before registering hooks. If nf_tables_register_hook() then fails, the error path calls nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy() with no RCU grace period in between. This creates two use-after-free conditions: 1) Control-plane: nf_tables_dump_chains() traverses table->chains under rcu_read_lock(). A concurrent dump can still be walking the chain when the error path frees it. 2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly installs the IPv4 hook before IPv6 registration fails. Packets entering nft_do_chain() via the transient IPv4 hook can still be dereferencing chain->blob_gen_X when the error path frees the chain. Add synchronize_rcu() between nft_chain_del() and the chain destroy so that all RCU readers -- both dump threads and in-flight packet evaluation -- have finished before the chain is freed.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/2a6586ecfa4ce1413daaafee250d2590e05f1a33
- https://git.kernel.org/stable/c/2f9a4ffeb763aec822f8ff3d1e82202d27d46d4b
- https://git.kernel.org/stable/c/7017745068a9068904e1e7a1b170a5785647cc81
- https://git.kernel.org/stable/c/71e99ee20fc3f662555118cf1159443250647533
- https://git.kernel.org/stable/c/dbd0af8083dd201f07c49110b2ee93710abdff28
- https://git.kernel.org/stable/c/f3fe58ce37926a10115ede527d59b91bcc05400a
- https://cert-portal.siemens.com/productcert/html/ssa-253495.html
HIGH7.5
In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix potential NULL pointer dereference in header processing If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(), qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data() dereferences qp->rx_fpdu->more_ddp_segs without checking, which may lead to a NULL pointer deref. Only check more_ddp_segs when rx_fpdu is present. KASAN splat: [ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] [ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/14ab3da122bd18920ad57428f6cf4fade8385142
- https://git.kernel.org/stable/c/714c99e1dc8f85f446e05be02ba83972e981a817
- https://git.kernel.org/stable/c/8564dcc12fbb372d984ab45768cae9335777b274
- https://git.kernel.org/stable/c/87b7a036d2c73d5bb3ae2d47dee23de465db3355
- https://git.kernel.org/stable/c/ab61841633d10e56a58c1493a262f0d02dba2f5e
- https://git.kernel.org/stable/c/ab957056192d6bd068b3759cb2077d859cca01f0
- https://git.kernel.org/stable/c/ce025f7f5d070596194315eb2e4e89d568b8a755
- https://git.kernel.org/stable/c/ffba40b67663567481fa8a1ed5d2da36897c175d
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/1371ef6b1ecf3676b8942f5dfb3634fb0648128e
- https://git.kernel.org/stable/c/205955f29c26330b1dc7fdeadd5bb97c38e26f56
- https://git.kernel.org/stable/c/362e45fd9069ffa1523f9f1633b606ebf72060d7
- https://git.kernel.org/stable/c/52ab82cc5cf8ada5c3fb6ffe8f32fdb2fc27a34b
- https://git.kernel.org/stable/c/5551b02fdbfd85a325bb857f3a8f9c9f33397ed2
- https://git.kernel.org/stable/c/6eb2919474ca105c5b13d19574e25f0ddcf19ca2
- https://git.kernel.org/stable/c/9c80d688f402539dfc8f336de1380d6b4ee14316
- https://git.kernel.org/stable/c/a6a3e4af10993cb9e4b8f0548680aba0ab5f3b0d
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved:
macvlan: observe an RCU grace period in macvlan_common_newlink() error path
valis reported that a race condition still happens after my prior patch.
macvlan_common_newlink() might have made @dev visible before
detecting an error, and its caller will directly call free_netdev(dev).
We must respect an RCU period, either in macvlan or the core networking
stack.
After adding a temporary mdelay(1000) in macvlan_forward_source_one()
to open the race window, valis repro was:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
(ip link add invalid% link p2 type macvlan mode source macaddr add
00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4
PING 1.2.3.4 (1.2.3.4): 56 data bytes
RTNETLINK answers: Invalid argument
BUG: KASAN: slab-use-after-free in macvlan_forward_source
(drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
Read of size 8 at addr ffff888016bb89c0 by task e/175
CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
kasan_report (mm/kasan/report.c:597)
? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
? tasklet_init (kernel/softirq.c:983)
macvlan_handle_frame (drivers/net/macvlan.c:501)
Allocated by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
__kasan_kmalloc (mm/kasan/common.c:419)
__kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657
mm/slub.c:7140)
alloc_netdev_mqs (net/core/dev.c:12012)
rtnl_create_link (net/core/rtnetlink.c:3648)
rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Freed by task 169:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/x86/include/asm/current.h:25
mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kfree (mm/slub.c:6674 mm/slub.c:6882)
rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957
net/core/rtnetlink.c:4072)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/19c7d8ac51988d053709c1e85bd8482076af845d
- https://git.kernel.org/stable/c/1e58ae87ad1e6e24368dea9aec9048c758cd0e2b
- https://git.kernel.org/stable/c/3d94323c80d7fc4da5f10f9bb06a45d39d5d3cc4
- https://git.kernel.org/stable/c/721eb342d9ba19bad5c4815ea3921465158b7362
- https://git.kernel.org/stable/c/91e4ff8d966978901630fc29582c1a76d3c6e46c
- https://git.kernel.org/stable/c/a1f686d273d129b45712d95f4095843b864466bd
- https://git.kernel.org/stable/c/d34f7a8aa9a25b7e64e0e46e444697c0f702374d
- https://git.kernel.org/stable/c/e3f000f0dee1bfab52e2e61ca6a3835d9e187e35
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: net: atm: fix crash due to unvalidated vcc pointer in sigd_send() Reproducer available at [1]. The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc pointer from msg->vcc and uses it directly without any validation. This pointer comes from userspace via sendmsg() and can be arbitrarily forged: int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0); ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon struct msghdr msg = { .msg_iov = &iov, ... }; *(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef In normal operation, the kernel sends the vcc pointer to the signaling daemon via sigd_enq() when processing operations like connect(), bind(), or listen(). The daemon is expected to return the same pointer when responding. However, a malicious daemon can send arbitrary pointer values. Fix this by introducing find_get_vcc() which validates the pointer by searching through vcc_hash (similar to how sigd_close() iterates over all VCCs), and acquires a reference via sock_hold() if found. Since struct atm_vcc embeds struct sock as its first member, they share the same lifetime. Therefore using sock_hold/sock_put is sufficient to keep the vcc alive while it is being used. Note that there may be a race with sigd_close() which could mark the vcc with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns. However, sock_hold() guarantees the memory remains valid, so this race only affects the logical state, not memory safety. [1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1c8bda3df028d5e54134077dcd09f46ca8cfceb5
- https://git.kernel.org/stable/c/21c303fec138c002f90ed33bce60e807d53072bb
- https://git.kernel.org/stable/c/3e1a8b00095246a9a2b46b57f6d471c6d3c00ed2
- https://git.kernel.org/stable/c/440c9a5fc477a8ee259d8bf669531250b8398651
- https://git.kernel.org/stable/c/69d3f9ee5489e6e8b66defcfa226e91d82393297
- https://git.kernel.org/stable/c/ae88a5d2f29b69819dc7b04086734439d074a643
- https://git.kernel.org/stable/c/c96549d07dfdd51aadf0722cfb40711574424840
- https://git.kernel.org/stable/c/e3f80666c2739296c3b69a127300455c43aa1067
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE when accessing forward path array Although unlikely, recent support for IPIP tunnels increases chances of reaching this WARN_ON_ONCE if userspace manages to build a sufficiently long forward path. Remove it.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/008e7a7c293b30bc43e4368dac6ea3808b75a572
- https://git.kernel.org/stable/c/50422613185d505201167e8bdd2f2700790d5db6
- https://git.kernel.org/stable/c/548244c2f542aa0ad49453e9306e715a3877bc44
- https://git.kernel.org/stable/c/9464ca7a6e56ad1ebf48b2ad5c16871edfad10c6
- https://git.kernel.org/stable/c/959ea349c7e2d4edf07b6838ca7e59345fe61a08
- https://git.kernel.org/stable/c/a78d055ba7c31103ad02f8eceb0c452e154d2660
- https://git.kernel.org/stable/c/dcf9b3c90e5560339649d088836529883fb509f3
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL sock in aa_sock_file_perm Deal with the potential that sock and sock-sk can be NULL during socket setup or teardown. This could lead to an oops. The fix for NULL pointer dereference in __unix_needs_revalidation shows this is at least possible for af_unix sockets. While the fix for af_unix sockets applies for newer mediation this is still the fall back path for older af_unix mediation and other sockets, so ensure it is covered.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/00b67657535dfea56e84d11492f5c0f61d0af297
- https://git.kernel.org/stable/c/0dc19bca22606f7a61d5988408f74e3ae0ef3486
- https://git.kernel.org/stable/c/3852eb9a0392eb435c03dcb47d581bcfe6a9a95b
- https://git.kernel.org/stable/c/5121b7283f1c46e4c06b88b1dda7b064429d77de
- https://git.kernel.org/stable/c/68538ec34fcb4194c7961dc4eca6f5537fec8067
- https://git.kernel.org/stable/c/8a0ededbfcff74598f82f1d4b8ef9db28878b317
- https://git.kernel.org/stable/c/c11b7c3280d000376e27ebfed17ec7046699eab4
- https://git.kernel.org/stable/c/ccb66a3c6c8f51b3ed1bc003b70bb9ff99e8d835
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj() ocelot_port_xmit_inj() calls ocelot_can_inject() and ocelot_port_inject_frame() without holding the injection group lock. Both functions contain lockdep_assert_held() for the injection lock, and the correct caller felix_port_deferred_xmit() properly acquires the lock using ocelot_lock_inj_grp() before calling these functions. Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register injection path to fix the missing lock protection. The FDMA path is not affected as it uses its own locking mechanism.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/026f6513c5880c2c89e38ad66bbec2868f978605
- https://git.kernel.org/stable/c/0b217a40156f497e09dd20d3f7baec40c785f386
- https://git.kernel.org/stable/c/51c32ae7fae14552d79f7139614b77c1bbd57a48
- https://git.kernel.org/stable/c/63da961381e0d979459dede713001f8452364477
- https://git.kernel.org/stable/c/7ac58d8832802ec89baa7539e13e6d58a88cce04
- https://git.kernel.org/stable/c/cc1b179f778f98270bdbbb48d183b4b6427ae198
HIGH7.1
In the Linux kernel, the following vulnerability has been resolved: efi: Fix reservation of unaccepted memory table The reserve_unaccepted() function incorrectly calculates the size of the memblock reservation for the unaccepted memory table. It aligns the size of the table, but fails to account for cases where the table's starting physical address (efi.unaccepted) is not page-aligned. If the table starts at an offset within a page and its end crosses into a subsequent page that the aligned size does not cover, the end of the table will not be reserved. This can lead to the table being overwritten or inaccessible, causing a kernel panic in accept_memory(). This issue was observed when starting Intel TDX VMs with specific memory sizes (e.g., > 64GB). Fix this by calculating the end address first (including the unaligned start) and then aligning it up, ensuring the entire range is covered by the reservation.
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:HСсылки
- https://git.kernel.org/stable/c/0862438c90487e79822d5647f854977d50381505
- https://git.kernel.org/stable/c/9b18bf59977f5c5bc3b11b210520f62500a7adf3
- https://git.kernel.org/stable/c/b7bc182ec1846be437351e44164089d988f9d0dd
- https://git.kernel.org/stable/c/ba6b6f1502fa55621d1db23f253d54322bdbe4e0
- https://git.kernel.org/stable/c/e649b5916725c68f44ebf45fb396df563c5dbaf2
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe] rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150 [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/0beefd0e15d962f497aad750b2d5e9c3570b66d1
- https://git.kernel.org/stable/c/26793db60925df1e88a29466813d586cbc190b8c
- https://git.kernel.org/stable/c/26a9cfe12f4ffdeaa136f252478986fa5f397ddc
- https://git.kernel.org/stable/c/5c07aef09a121a4cd622a71eb0753a9e135c84a8
- https://git.kernel.org/stable/c/9abff51163aa1bc275ec356f74fe976291860a7f
- https://git.kernel.org/stable/c/b98ab5494dbd48652561aa0b9c32f10500220745
- https://git.kernel.org/stable/c/ce6f8e007682f378279d4cf83b240f12d52c723b
- https://git.kernel.org/stable/c/d493e0bfc748a520c349d6c8791b262aa5ad2e4e
- https://access.redhat.com/errata/RHSA-2026:25120
- https://access.redhat.com/errata/RHSA-2026:25121
- https://access.redhat.com/errata/RHSA-2026:25217
- https://access.redhat.com/errata/RHSA-2026:27713
- https://access.redhat.com/errata/RHSA-2026:33899
- https://access.redhat.com/security/cve/CVE-2026-45852
- https://bugzilla.redhat.com/show_bug.cgi?id=2482166
- https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-45852.json
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: crypto: inside-secure/eip93 - unregister only available algorithm EIP93 has an options register. This register indicates which crypto algorithms are implemented in silicon. Supported algorithms are registered on this basis. Unregister algorithms on the same basis. Currently, all algorithms are unregistered, even those not supported by HW. This results in panic on platforms that don't have all options implemented in silicon.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: avoid Non-NCQ command starvation When a non-NCQ command is issued while NCQ commands are being executed, ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command deferring is correct and as mandated by the ACS specifications since NCQ and non-NCQ commands cannot be mixed. However, in the case of a host adapter using multiple submission queues, when the target device is under a constant load of NCQ commands, there are no guarantees that requeueing the non-NCQ command will be executed later and it may be deferred again repeatedly as other submission queues can constantly issue NCQ commands from different CPUs ahead of the non-NCQ command. This can lead to very long delays for the execution of non-NCQ commands, and even complete starvation for these commands in the worst case scenario. Since the block layer and the SCSI layer do not distinguish between queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT implementation must ensure forward progress for non-NCQ commands in the presence of NCQ command traffic. This is similar to what SAS HBAs with a hardware/firmware based SAT implementation do. Implement such forward progress guarantee by limiting requeueing of non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is received and NCQ commands are in-flight, do not force a requeue of the non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0 to indicate that the command was accepted but hold on to the qc using the new deferred_qc field of struct ata_port. This deferred qc will be issued using the work item deferred_qc_work running the function ata_scsi_deferred_qc_work() once all in-flight commands complete, which is checked with the port qc_defer() callback return value indicating that no further delay is necessary. This check is done using the helper function ata_scsi_schedule_deferred_qc() which is called from ata_scsi_qc_complete(). This thus excludes this mechanism from all internal non-NCQ commands issued by ATA EH. When a port deferred_qc is non NULL, that is, the port has a command waiting for the device queue to drain, the issuing of all incoming commands (both NCQ and non-NCQ) is deferred using the regular busy mechanism. This simplifies the code and also avoids potential denial of service problems if a user issues too many non-NCQ commands. Finally, whenever ata EH is scheduled, regardless of the reason, a deferred qc is always requeued so that it can be retried once EH completes. This is done by calling the function ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids the need for any special processing for the deferred qc in case of NCQ error, link or device reset, or device timeout.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.1
In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:HСсылки
- https://git.kernel.org/stable/c/01c9b152647dc70dc06a4a2eff86ebb3b3c76075
- https://git.kernel.org/stable/c/1956f0a74ccf5dc9c3ef717f2985c3ed3400aab0
- https://git.kernel.org/stable/c/9b5ac1c15334d46c0dbd49d64a2257b929500163
- https://git.kernel.org/stable/c/9c15ec4cd4e7f57c6bbcb4e73e99290f150dd2a7
- https://git.kernel.org/stable/c/bef70ff9841990658610512b4a18e4a88c9b4df6
- https://git.kernel.org/stable/c/bf1feed1a7886af945f92890493aefd2b5c9928a
- https://git.kernel.org/stable/c/bf4454da8b1e712714628c0a0d6e7845bb40790a
- https://git.kernel.org/stable/c/d533425ac1f2925b4fc3e4ed9b9d72362cb23475
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: scsi: csiostor: Fix dereference of null pointer rn The error exit path when rn is NULL ends up deferencing the null pointer rn via the use of the macro CSIO_INC_STATS. Fix this by adding a new error return path label after the use of the macro to avoid the deference.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/16ccbfddcb32365138c806cf572e69b42a193c5c
- https://git.kernel.org/stable/c/1982257570b84dc33753d536dd969fd357a014e9
- https://git.kernel.org/stable/c/25ab5e97d3c5f3ed594b4a65d1cc99dc24756681
- https://git.kernel.org/stable/c/25d623f0d77c11a256a54e860d00c239aa9a2583
- https://git.kernel.org/stable/c/3bbbab7b6949c76df64210348adbefedaabbf549
- https://git.kernel.org/stable/c/44ef9f81392de885883f73b9f5c43936a82ae9d7
- https://git.kernel.org/stable/c/526ea3c0ccd495b0079db3e28fdddd51c1bf01f7
- https://git.kernel.org/stable/c/6037124dbf675fbd0a6248aaf04cf07387b8c323
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1 When allocating initialized blocks from a large unwritten extent, or when splitting an unwritten extent during end I/O and converting it to initialized, there is currently a potential issue of stale data if the extent needs to be split in the middle. 0 A B N [UUUUUUUUUUUU] U: unwritten extent [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but ext4_split_extent_at() failed to split this extent due to temporary lack of space. It zeroout B to N and mark the entire extent from 0 to N as written. 0 A B N [WWWWWWWWWWWW] W: written extent [SSDDDDDDDDZZ] Z: zeroed, S: stale data ext4_split_extent() then try to split this extent at A with EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left a stale written extent from 0 to A. 0 A B N [WW|WWWWWWWWWW] [SS|DDDDDDDDZZ] Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at() when splitting at B, don't convert the entire extent to written and left it as unwritten after zeroing out B to N. The remaining work is just like the standard two-part split. ext4_split_extent() will pass the EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the second time, allowing it to properly handle the split. If the split is successful, it will keep extent from 0 to A as unwritten.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1bf6974822d1dba86cf11b5f05498581cf3488a2
- https://git.kernel.org/stable/c/58ddae5d77b1db3a27b891c75a8fa120239ac092
- https://git.kernel.org/stable/c/7015fcf473796e1d2d876f241bd9e0c36f3d4eef
- https://git.kernel.org/stable/c/d17857b4fb9ba5745b59be0ef38fd532991fccbf
- https://git.kernel.org/stable/c/d67c8ecf3d8fda9b8ef80e6f665d84b6d6ac9d88
HIGH7.5
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation Ulrich reports a regression with nfqueue: If an application did not set the 'F_GSO' capability flag and a gso packet with an unconfirmed nf_conn entry is received all packets are now dropped instead of queued, because the check happens after skb_gso_segment(). In that case, we did have exclusive ownership of the skb and its associated conntrack entry. The elevated use count is due to skb_clone happening via skb_gso_segment(). Move the check so that its peformed vs. the aggregated packet. Then, annotate the individual segments except the first one so we can do a 2nd check at reinject time. For the normal case, where userspace does in-order reinjects, this avoids packet drops: first reinjected segment continues traversal and confirms entry, remaining segments observe the confirmed entry. While at it, simplify nf_ct_drop_unconfirmed(): We only care about unconfirmed entries with a refcnt > 1, there is no need to special-case dying entries. This only happens with UDP. With TCP, the only unconfirmed packet will be the TCP SYN, those aren't aggregated by GRO. Next patch adds a udpgro test case to cover this scenario.
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:HHIGH7.5
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/0792ad077d776c2dcf20f0484e2461ded1b77a24
- https://git.kernel.org/stable/c/0af0812baf2d363176c9b76fc07e33f13aede8db
- https://git.kernel.org/stable/c/13eede458fdf231f1bf96a398feea4ad1553f14c
- https://git.kernel.org/stable/c/21d033e472735ecec677f1ae46d6740b5e47a4f3
- https://git.kernel.org/stable/c/3d0994ed0aa1fc0a2c5e620b765e8defdd021bff
- https://git.kernel.org/stable/c/6e5fa7add3e76da068a478d905be64be8fa4e80a
- https://git.kernel.org/stable/c/a5c9e14e0e8923218ae881d5e78c990c07694966
- https://git.kernel.org/stable/c/fa85432d58c8e74b39333edbf8d28df2985dfc79
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix slab-use-after-free in qd_put
Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey .
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush cache for PASID table before using it When writing the address of a freshly allocated zero-initialized PASID table to a PASID directory entry, do that after the CPU cache flush for this PASID table, not before it, to avoid the time window when this PASID table may be already used by non-coherent IOMMU hardware while its contents in RAM is still some random old data, not zero-initialized.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/0616137b70e6d9a547d4b60df8e1b64e36d83661
- https://git.kernel.org/stable/c/22d169bdd2849fe6bd18c2643742e1c02be6451c
- https://git.kernel.org/stable/c/36244dfd3853f7bf89d03b8e90d56b23ce7fbc16
- https://git.kernel.org/stable/c/36990407cdd257473607e33802d00e978af2759e
- https://git.kernel.org/stable/c/5962c30a6f05ea1ab73f039e235bb30716243517
- https://git.kernel.org/stable/c/c93f23375d8c410954b0df825e814b632fd62b9d
- https://git.kernel.org/stable/c/cd75e77125c8a51754ca4cd60b4ca083ed735d1d
- https://git.kernel.org/stable/c/d15cda135148ea7ba929cfdbcf208182bc29a7aa
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: i3c: dw: Fix memory leak in dw_i3c_master_i2c_xfers() The dw_i3c_master_i2c_xfers() function allocates memory for the xfer structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get() fails, the function returns without freeing the allocated xfer, resulting in a memory leak. Add a dw_i3c_master_free_xfer() call to the error path to ensure the allocated memory is properly freed. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent infinite loops caused by the next valid being the same When processing valid within the range [valid : pos), if valid cannot be retrieved correctly, for example, if the retrieved valid value is always the same, this can trigger a potential infinite loop, similar to the hung problem reported by syzbot [1]. Adding a check for the valid value within the loop body, and terminating the loop and returning -EINVAL if the value is the same as the current value, can prevent this. [1] INFO: task syz.4.21:6056 blocked for more than 143 seconds. Call Trace: rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244 inode_lock include/linux/fs.h:1027 [inline] ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/27b75ca4e51e3e4554dc85dbf1a0246c66106fd3
- https://git.kernel.org/stable/c/4bf3bafb8e0635ed93e3cd4156dcbcc0fb960cb4
- https://git.kernel.org/stable/c/50c822fcb36768f1fb356f05b02a2248ef81936d
- https://git.kernel.org/stable/c/6d93239b4fc479f7c0a412dd196ec0ca2672d14a
- https://git.kernel.org/stable/c/71c8b966ec56e13c02388c1312910588bb49be7a
- https://git.kernel.org/stable/c/a47a2bb9aa6455d5cee1045814a60c749309c92b
- https://git.kernel.org/stable/c/b97e371e5d1c13d722335d46eb8bc1a22b272a0e
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: mctp i2c: initialise event handler read bytes Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads will return "val" from the i2c bus driver. For i2c-aspeed and i2c-npcm7xx that is a stack uninitialised u8. Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c instance, now it returns all 0xff.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/11f83253244060b5de5eac787f61ae3f3e559d01
- https://git.kernel.org/stable/c/1eeedb310229bfee9dd4d992e5bba33fe1378a8f
- https://git.kernel.org/stable/c/2a14e91b6d76639dac70ea170f4384c1ee3cb48d
- https://git.kernel.org/stable/c/6ff2ebfef75fbc57d937d8fbe738b967edf2d331
- https://git.kernel.org/stable/c/93e01e837e105299f1c259ef71f6e1ec4fe806e3
- https://git.kernel.org/stable/c/fa9861e5c8af7651dddfa8d490aaada17ae33b6c
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved:
serial: caif: fix use-after-free in caif_serial ldisc_close()
There is a use-after-free bug in caif_serial where handle_tx() may
access ser->tty after the tty has been freed.
The race condition occurs between ldisc_close() and packet transmission:
CPU 0 (close) CPU 1 (xmit)
------------- ------------
ldisc_close()
tty_kref_put(ser->tty)
[tty may be freed here]
<-- race window -->
caif_xmit()
handle_tx()
tty = ser->tty // dangling ptr
tty->ops->write() // UAF!
schedule_work()
ser_release()
unregister_netdevice()
The root cause is that tty_kref_put() is called in ldisc_close() while
the network device is still active and can receive packets.
Since ser and tty have a 1:1 binding relationship with consistent
lifecycles (ser is allocated in ldisc_open and freed in ser_release
via unregister_netdevice, and each ser binds exactly one tty), we can
safely defer the tty reference release to ser_release() where the
network device is unregistered.
Fix this by moving tty_kref_put() from ldisc_close() to ser_release(),
after unregister_netdevice(). This ensures the tty reference is held
as long as the network device exists, preventing the UAF.
Note: We save ser->tty before unregister_netdevice() because ser is
embedded in netdev's private data and will be freed along with netdev
(needs_free_netdev = true).
How to reproduce: Add mdelay(500) at the beginning of ldisc_close()
to widen the race window, then run the reproducer program [1].
Note: There is a separate deadloop issue in handle_tx() when using
PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper
serial backend). This deadloop exists even without this patch,
and is likely caused by inconsistency between uart_write_room() and
uart_write() in serial core. It has been addressed in a separate
patch [2].
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620
Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929
Call Trace:
dump_stack_lvl+0x10e/0x1f0
print_report+0xd0/0x630
kasan_report+0xe4/0x120
handle_tx+0x5d1/0x620
dev_hard_start_xmit+0x9d/0x6c0
__dev_queue_xmit+0x6e2/0x4410
packet_xmit+0x243/0x360
packet_sendmsg+0x26cf/0x5500
__sys_sendto+0x4a3/0x520
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0xc9/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f615df2c0d7
Allocated by task 9930:
Freed by task 64:
Last potentially related work creation:
The buggy address belongs to the object at ffff8881131e1000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1168 bytes inside of
freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)
The buggy address belongs to the physical page:
page_owner tracks the page as allocated
page last free pid 9778 tgid 9778 stack trace:
Memory state around the buggy address:
ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb
[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/308e7e4d0a846359685f40aade023aee7b27284c
- https://git.kernel.org/stable/c/331e2b7051635780edea248dd08ae2026c126f4a
- https://git.kernel.org/stable/c/40962f2bf8cdba63af23aec95ad3f49b689e58e2
- https://git.kernel.org/stable/c/4e63d6f68544ae5269ac9735ae5b69b59b5b8725
- https://git.kernel.org/stable/c/52731ef4438155cea782fac74e547a327ab9e7c5
- https://git.kernel.org/stable/c/5e266ba8d330d3b8e5bc198f238cd8901826cfa1
- https://git.kernel.org/stable/c/c8c197aaa56b25a2d54f3aa07e27e228d6c08546
- https://git.kernel.org/stable/c/d3c75db4e0460641dbcd274b40867e252d801da1
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: act8945a: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/0768e8525a46df103647ca5059b32320d7fd17e4
- https://git.kernel.org/stable/c/3291c51d4684d048dd2eb91b5b65fcfdaf72141f
- https://git.kernel.org/stable/c/697bb5dc0cb4791e244f3970b067bc1ef33be9d9
- https://git.kernel.org/stable/c/76a42ba547a9b2e2337894f67a4d9247445007d5
- https://git.kernel.org/stable/c/83c1bd466c514cb24ca6ef347c5aac76a13c4e1e
- https://git.kernel.org/stable/c/d023ef9f748b2090f7a9dbdd5c622b6ad99088ea
- https://git.kernel.org/stable/c/f27eb76def5c07e4d7cc468b40741f19dafc83ce
- https://git.kernel.org/stable/c/f2a0777b1e5a3cee1712c4d3e9095c0df8fc8cb3
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix refcount leak in pcs_add_gpio_func() of_parse_phandle_with_args() returns a device_node pointer with refcount incremented in gpiospec.np. The loop iterates through all phandles but never releases the reference, causing a refcount leak on each iteration. Add of_node_put() calls to release the reference after extracting the needed arguments and on the error path when devm_kzalloc() fails. This bug was detected by our static analysis tool and verified by my code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/191bfd5710d6a7f48ba4315d8d3e908dcc15243c
- https://git.kernel.org/stable/c/353353309b0f7afa407df29e455f9d15b5acc296
- https://git.kernel.org/stable/c/3e3b28bb0b6ddc521a4fdd1c1ba0d35017a0796b
- https://git.kernel.org/stable/c/456a60d06c09a92680dc35fabca68024badcc28e
- https://git.kernel.org/stable/c/5b9e84d27e310f22c4ba45fedbc4f5baf43dd823
- https://git.kernel.org/stable/c/7814b1431848854b56717086e2b61bea3c59753d
- https://git.kernel.org/stable/c/99cc7352156c65201c675f750e0e77c4c73d93f5
- https://git.kernel.org/stable/c/e2e367e56bacb93ce5ac73f0b3297d5c83d38dd4
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed() In `probe()`, `request_irq()` is called before allocating/registering a `power_supply` handle. If an interrupt is fired between the call to `request_irq()` and `power_supply_register()`, the `power_supply` handle will be used uninitialized in `power_supply_changed()` in `wm97xx_bat_update()` (triggered from the interrupt handler). This will lead to a `NULL` pointer dereference since Fix this racy `NULL` pointer dereference by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. Since the IRQ is the last thing requests in the `probe()` now, remove the error path for freeing it. Instead add one for unregistering the `power_supply` handle when IRQ request fails.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/39fe0eac6d755ef215026518985fcf8de9360e9e
- https://git.kernel.org/stable/c/3d7b5391bb95505b3581c1fb77150c467ab92864
- https://git.kernel.org/stable/c/438f9a303ea8b55162b2d5376490c2ab3ec165a0
- https://git.kernel.org/stable/c/86183153c299e8bb1839e717286d6c6f39508a59
- https://git.kernel.org/stable/c/93bdf715d33cf5ee01c58e8546c2469c71ce082a
- https://git.kernel.org/stable/c/9b7d77cb046b4487e8e511e04e62b6f416ce845c
- https://git.kernel.org/stable/c/c0def811ad8d642dca9b6d31a198cc39f5f90837
- https://git.kernel.org/stable/c/dfaf235d5a6b60cbf115a14a656946303ad007b7
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: auth_gss: fix memory leaks in XDR decoding error paths The gssx_dec_ctx(), gssx_dec_status(), and gssx_dec_name() functions allocate memory via gssx_dec_buffer(), which calls kmemdup(). When a subsequent decode operation fails, these functions return immediately without freeing previously allocated buffers, causing memory leaks. The leak in gssx_dec_ctx() is particularly relevant because the caller (gssp_accept_sec_context_upcall) initializes several buffer length fields to non-zero values, resulting in memory allocation: struct gssx_ctx rctxh = { .exported_context_token.len = GSSX_max_output_handle_sz, .mech.len = GSS_OID_MAX_LEN, .src_name.display_name.len = GSSX_max_princ_sz, .targ_name.display_name.len = GSSX_max_princ_sz }; If, for example, gssx_dec_name() succeeds for src_name but fails for targ_name, the memory allocated for exported_context_token, mech, and src_name.display_name remains unreferenced and cannot be reclaimed. Add error handling with goto-based cleanup to free any previously allocated buffers before returning an error.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/3b56eb90feb8a3709417f5624f3871847d42bcb1
- https://git.kernel.org/stable/c/3e6397b056335cc56ef0e9da36c95946a19f5118
- https://git.kernel.org/stable/c/64303b92d94c0c7845a273acd8d84b796d6f1db7
- https://git.kernel.org/stable/c/b4af3806846778799cd4ab0766dc18341e777264
- https://git.kernel.org/stable/c/c81431b1b9fbd21e9a5a9211b5517b7295d18e6a
- https://git.kernel.org/stable/c/caf7eff432e91a9eba1c79fa545c2f54be15d62b
- https://git.kernel.org/stable/c/d79b9097a6a2b91471b40755f1225364be5d85ff
- https://git.kernel.org/stable/c/df10f23defff22c8d55fe6db74f6e4ce927145bf
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: tpm: st33zp24: Fix missing cleanup on get_burstcount() error get_burstcount() can return -EBUSY on timeout. When this happens, st33zp24_send() returns directly without releasing the locality acquired earlier. Use goto out_err to ensure proper cleanup when get_burstcount() fails.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1256c6dc96d1e687e6e9b63088156ed07411b00c
- https://git.kernel.org/stable/c/3e91b44c93ad2871f89fc2a98c5e4fe6ca5db3d9
- https://git.kernel.org/stable/c/4fffb77d35d038f146e6192da583dbe4971d869e
- https://git.kernel.org/stable/c/7687133509cf66ced120b667fefd21f80bf17993
- https://git.kernel.org/stable/c/a51cff9be046e13e1c1b2fe45d5c48b582ec9b8c
- https://git.kernel.org/stable/c/cc09d55f519e15355de343264a22ac6682b8305e
- https://git.kernel.org/stable/c/e0ce3da82341fcd6194175f1837946b2a894c625
- https://git.kernel.org/stable/c/ec15eb67fe9df87981b4829b901ec254273ca483
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix memory leak in pqi_report_phys_luns() pqi_report_phys_luns() fails to release the rpl_list buffer when encountering an unsupported data format or when the allocation for rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic, leading to memory leaks. Consolidate the error handling by adding an out_free_rpl_list label and use goto statements to ensure rpl_list is consistently freed on failure. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/41b37312bd9722af77ec7817ccf22d7a4880c289
- https://git.kernel.org/stable/c/454570434114e4862767f506a442a0f110b639b2
- https://git.kernel.org/stable/c/d52e13122d3771f753dd73ae6512fa01f58015cb
- https://git.kernel.org/stable/c/e5579ebaadc7b699868dad0f591a7bf83cd647e1
- https://git.kernel.org/stable/c/f471ecfec093e39ef8fd08978413793087daa14d
- https://git.kernel.org/stable/c/fdf1188cfa80f88c9f18d58cb33d57ff40e70e26
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets Userspace provides an optimized representation in case intervals are adjacent, where the end element is omitted. The existing partial overlap detection logic skips anonymous set checks on start elements for this reason. However, it is possible to add intervals that overlap to this anonymous where two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A C Restore the check on overlapping start elements to report an overlap.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/029e5f6a95e905b12d6bc20421be32a01e0eb311
- https://git.kernel.org/stable/c/05feaf826390fd16f1deb89dd9412def3b2a280f
- https://git.kernel.org/stable/c/4780ec142cbb24b794129d3080eee5cac2943ffc
- https://git.kernel.org/stable/c/7ca5813e1b21ef300e04593f47b073ef3217aac6
- https://git.kernel.org/stable/c/dad14d22dff1a191612acb98facceb303d0524a2
- https://git.kernel.org/stable/c/e6497e06a102870803a59570d75ed2c36d7e11b3
- https://git.kernel.org/stable/c/f1381ce0a1dd013610985e1c4260908163a427df
- https://git.kernel.org/stable/c/f1535d56fc3f6c625b7e0559c006bd0318791bb1
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: phy: freescale: imx8qm-hsio: fix NULL pointer dereference During the probe the refclk_pad pointer is set to NULL if the 'fsl,refclk-pad-mode' property is not defined in the devicetree node. But in imx_hsio_configure_clk_pad() this pointer is unconditionally used which could result in a NULL pointer dereference. So check the pointer before to use it.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: mfd: arizona: Fix regulator resource leak on wm5102_clear_write_sequencer() failure The wm5102_clear_write_sequencer() helper may return an error and just return, bypassing the cleanup sequence and causing regulators to remain enabled, leading to a resource leak. Change the direct return to jump to the err_reset label to properly free the resources.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/2049820d1e635e467d795237fd40287213d92349
- https://git.kernel.org/stable/c/3ea01691738b0decb63ea2705d2cdf27f6f26fc0
- https://git.kernel.org/stable/c/445cec7b4fbb1546836ae8e332d158e8d37d0fb6
- https://git.kernel.org/stable/c/4feb753ba6e5e5bbaba868b841a2db41c21e56fa
- https://git.kernel.org/stable/c/54eafc1b0dbcf79c5f8b6dc8d9e92e56b9384c0a
- https://git.kernel.org/stable/c/5a4923726a165593d7601834a6fb2a10ab47b85d
- https://git.kernel.org/stable/c/933c5463873582baaecf5c38401ec4095b1c6269
- https://git.kernel.org/stable/c/e0527c09bcf1e6beeb685a7f4177683866b8609c
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: arm64/gcs: Fix error handling in arch_set_shadow_stack_status() alloc_gcs() returns an error-encoded pointer on failure, which comes from do_mmap(), not NULL. The current NULL check fails to detect errors, which could lead to using an invalid GCS address. Use IS_ERR_VALUE() to properly detect errors, consistent with the check in gcs_alloc_thread_stack().
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients During a warm reset flow, the cl->device pointer may be NULL if the reset occurs while clients are still being enumerated. Accessing cl->device->reference_count without a NULL check leads to a kernel panic. This issue was identified during multi-unit warm reboot stress clycles. Add a defensive NULL check for cl->device to ensure stability under such intensive testing conditions. KASAN: null-ptr-deref in range [0000000000000000-0000000000000007] Workqueue: ish_fw_update_wq fw_reset_work_fn Call Trace: ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp] ishtp_reset_handler+0x85/0x1a0 [intel_ishtp] fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc]
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id().
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/2b36c0c1bcbbe15f6cfa9652084b3124c835a150
- https://git.kernel.org/stable/c/3c38a0f07aa2bfef2b219b1f045534ad93f85afd
- https://git.kernel.org/stable/c/5a19302cab5cec7ae7f1a60c619951e6c17d8742
- https://git.kernel.org/stable/c/971bf8e61e9b4abaacf9b35eaf76ec222758f9d6
- https://git.kernel.org/stable/c/a0d367e13db63a6ed76ee0d0a8c3a58c1fa98488
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25980: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/03d1e4ee4e6aa6d2966e883e4ca0e5be73bf1b7c
- https://git.kernel.org/stable/c/0560a4b09c92e2ecaa883965cf6f9ca51c158ff9
- https://git.kernel.org/stable/c/0de95d29d847c6217b7d5845e24a71a4aee7b359
- https://git.kernel.org/stable/c/16875e3b7bc9e59bfa0acaf1e43f275a6f42a30f
- https://git.kernel.org/stable/c/4aeaf03c17260415c2fdd55992f9ad4188d5455a
- https://git.kernel.org/stable/c/5f0b1cb41906e86b64bf69f5ededb83b0d757c27
- https://git.kernel.org/stable/c/86f93dfb23f5bf4f285c4256a7e909d222f7de56
- https://git.kernel.org/stable/c/abea607ff2f62f4c0a5fb29f7fbdaaab163276a4
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: PCI/P2PDMA: Release per-CPU pgmap ref when vm_insert_page() fails When vm_insert_page() fails in p2pmem_alloc_mmap(), p2pmem_alloc_mmap() doesn't invoke percpu_ref_put() to free the per-CPU ref of pgmap acquired after gen_pool_alloc_owner(), and memunmap_pages() will hang forever when trying to remove the PCI device. Fix it by adding the missed percpu_ref_put().
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/51b7181cfbedf289ce794b6d97a1c596c309ec38
- https://git.kernel.org/stable/c/6220694c52a5a04102b48109e4f24e958b559bd3
- https://git.kernel.org/stable/c/a1f4dc72efc3204db95d052058d785cad7ce755f
- https://git.kernel.org/stable/c/baa42b756d183a59572f3890981a3d32b8d05d40
- https://git.kernel.org/stable/c/e19cce88ec4c4877f4ff2469099b9cf23cc3e93e
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: soc: mediatek: svs: Fix memory leak in svs_enable_debug_write() In svs_enable_debug_write(), the buf allocated by memdup_user_nul() is leaked if kstrtoint() fails. Fix this by using __free(kfree) to automatically free buf, eliminating the need for explicit kfree() calls and preventing leaks. [Angelo: Added missing cleanup.h inclusion]
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/06195456c4e4de3826c4ca60eca941c472f991d0
- https://git.kernel.org/stable/c/0f6498077faa9cd89bb787bcc57063494a6f0601
- https://git.kernel.org/stable/c/47a3e372f7d68776adb749a27c0ec9058ff1b4fd
- https://git.kernel.org/stable/c/6259094ee806fb813ca95894c65fb80e2ec98bf1
- https://git.kernel.org/stable/c/6bb10466e0884b4a68d4a1f3f4bb87eeb471c18a
- https://git.kernel.org/stable/c/a58c97828911c0b6e25d6b556789da974003efda
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: iio: sca3000: Fix a resource leak in sca3000_probe() spi->irq from request_threaded_irq() not released when iio_device_register() fails. Add an return value check and jump to a common error handler when iio_device_register() fails.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/103ac8e3a7f345a0966ef582b8a874ac31a92c7c
- https://git.kernel.org/stable/c/40c860ece22542178cddcf01b08644bcdbc597b3
- https://git.kernel.org/stable/c/517d9f2b963089b3d64c23accf7920d77f5a30c8
- https://git.kernel.org/stable/c/55e13abf22c27a3b0ab5cf941dd07a2d9786736c
- https://git.kernel.org/stable/c/597d749c5180f3e351837e851a6131b140324e9f
- https://git.kernel.org/stable/c/62b44ebc1f2c71db3ca2d4737c52e433f6f03038
- https://git.kernel.org/stable/c/84d3c396d8ae73c24dececfcc4e544ea09311e32
- https://git.kernel.org/stable/c/e8e960c3d23fdb4882d70d34ce762368da0f1427
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: apparmor: avoid per-cpu hold underflow in aa_get_buffer When aa_get_buffer() pulls from the per-cpu list it unconditionally decrements cache->hold. If hold reaches 0 while count is still non-zero, the unsigned decrement wraps to UINT_MAX. This keeps hold non-zero for a very long time, so aa_put_buffer() never returns buffers to the global list, which can starve other CPUs and force repeated kmalloc(aa_g_path_max) allocations. Guard the decrement so hold never underflows.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/2841bbb5a35c4449c0a0458e8e476b2a62f95147
- https://git.kernel.org/stable/c/2ce2334be155bd8bad6377e99984246ce4dbd08c
- https://git.kernel.org/stable/c/3ff75cba1c98349a23a8f9333981deba1972cc11
- https://git.kernel.org/stable/c/642f33e34b969eedec334738fd5df95d2dc42742
- https://git.kernel.org/stable/c/c549dd3de4b3f6e726d1b8386d40ccf7d3abdbe4
- https://git.kernel.org/stable/c/cbb9b07f88a9ef6518934c41eb3e8cf840d657d5
- https://git.kernel.org/stable/c/e261be6f18929f2397cd54cd583a2df624c129c1
- https://git.kernel.org/stable/c/f3fbe309c9bfe1aac1e2b26543e9dc4829f3275a
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_xdp_store_bytes proto for read-only arg While making some maps in Cilium read-only from the BPF side, we noticed that the bpf_xdp_store_bytes proto is incorrect. In particular, the verifier was throwing the following error: ; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr), &nat->address, 4, 0); 635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx() 636: (b4) w2 = 26 ; R2=26 637: (b4) w4 = 4 ; R4=4 638: (b4) w5 = 0 ; R5=0 639: (85) call bpf_xdp_store_bytes#190 write into map forbidden, value_size=6 off=0 size=4 nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE. The verifier checks the helper's memory access to R3 in check_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The third argument has expected type ARG_PTR_TO_UNINIT_MEM, which includes the MEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3. Given R3 points to a read-only map, the check fails. Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper reading from uninitialized memory. This patch simply fixes the expected argument type to match that of bpf_skb_store_bytes.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/0db169a91381a473b7974021d1c02f8da72c5775
- https://git.kernel.org/stable/c/57f7f6a0ad04a65c8a7a067b2f56cbbf2aec9e52
- https://git.kernel.org/stable/c/6557f1565d779851c4db9c488c49c05a47a6e72f
- https://git.kernel.org/stable/c/d7b87adeb0eb539b9b824b101bb14fb01e41240b
- https://git.kernel.org/stable/c/ddc34a1b85505c919026ddc82fafdada9a160b15
- https://git.kernel.org/stable/c/ffb5d1c5e3933b947fc7303ad68bf0c536d0c85e
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix memleak of newsk in unix_stream_connect(). When prepare_peercred() fails in unix_stream_connect(), unix_release_sock() is not called for newsk, and the memory is leaked. Let's move prepare_peercred() before unix_create1().
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix memory leak in raid1_run() raid1_run() calls setup_conf() which registers a thread via md_register_thread(). If raid1_set_limits() fails, the previously registered thread is not unregistered, resulting in a memory leak of the md_thread structure and the thread resource itself. Add md_unregister_thread() to the error path to properly cleanup the thread, which aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: mptcp: do not account for OoO in mptcp_rcvbuf_grow() MPTCP-level OoOs are physiological when multiple subflows are active concurrently and will not cause retransmissions nor are caused by drops. Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly drifting towards tcp_rmem[2]. Remove such accounting. Note that subflows will still account for TCP-level OoO when the MPTCP-level rcvbuf is propagated. This also closes a subtle and very unlikely race condition with rcvspace init; active sockets with user-space holding the msk-level socket lock, could complete such initialization in the receive callback, after that the first OoO data reaches the rcvbuf and potentially triggering a divide by zero Oops.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: xen-netback: reject zero-queue configuration from guest A malicious or buggy Xen guest can write "0" to the xenbus key "multi-queue-num-queues". The connect() function in the backend only validates the upper bound (requested_num_queues > xenvif_max_queues) but not zero, allowing requested_num_queues=0 to reach vzalloc(array_size(0, sizeof(struct xenvif_queue))), which triggers WARN_ON_ONCE(!size) in __vmalloc_node_range(). On systems with panic_on_warn=1, this allows a guest-to-host denial of service. The Xen network interface specification requires the queue count to be "greater than zero". Add a zero check to match the validation already present in xen-blkback, which has included this guard since its multi-queue support was added.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/2993e0f904c45f8af12917344bb1cac7ccd05a60
- https://git.kernel.org/stable/c/654780dee9eae419e1648ea58462c4efe54518fa
- https://git.kernel.org/stable/c/6d1dc8014334c7fb25719999bca84d811e60a559
- https://git.kernel.org/stable/c/787bfa423228c4b02ba3368128f625d579085353
- https://git.kernel.org/stable/c/88b0fced1bbbfdb356a007592604008ffc93a6a1
- https://git.kernel.org/stable/c/ce66d6786de45b7ed9cbbdc0988054bf09e58f54
- https://git.kernel.org/stable/c/d99f69ddc70fd9f4b8148add62209a1a8eb5c615
- https://git.kernel.org/stable/c/ec4859ac5c933e3315543a61adc1ca4358006a41
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix double free issue for tx spare buffer In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure is created for rollback. However, the tx_spare pointer in the original ring handle is incorrectly left pointing to the old backup memory. Later, if memory allocation fails in hns3_init_all_ring() during the setup, the error path attempts to free all newly allocated rings. Since tx_spare contains a stale (non-NULL) pointer from the backup, it is mistaken for a newly allocated buffer and is erroneously freed, leading to a double-free of the backup memory. The root cause is that the tx_spare field was not cleared after its value was saved in tmp_rings, leaving a dangling pointer. Fix this by setting tx_spare to NULL in the original ring structure when the creation of the new `tx_spare` fails. This ensures the error cleanup path only frees genuinely newly allocated buffers.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/43015461662d41dcfb3bb95fadd8a2a42ad8eacf
- https://git.kernel.org/stable/c/6d2f142b1e4b203387a92519d9d2e34752a79dbb
- https://git.kernel.org/stable/c/6dc10494cfe27b6f1e9adb7e293293ae39c50b7c
- https://git.kernel.org/stable/c/c3659273860bed0c8e573b865e3769abc51225a8
- https://git.kernel.org/stable/c/d2c785733dfb853ea0b53984c75662a1af230a94
- https://git.kernel.org/stable/c/fb6a4c376d454b425555b1b0bda36e99f56ec307
- https://git.kernel.org/stable/c/fdbccddb7e7822016601829f95de4008e193f7bc
HIGH7.1
In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix & Optimize table creation from possibly unaligned memory Source blob may come from userspace and might be unaligned. Try to optize the copying process by avoiding unaligned memory accesses. - Added Fixes tag - Added "Fix &" to description as this doesn't just optimize but fixes a potential unaligned memory access [jj: remove duplicate word "convert" in comment trigger checkpatch warning]
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down PASID entry The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64 bytes). When tearing down an entry, the current implementation zeros the entire 64-byte structure immediately using multiple 64-bit writes. Since the IOMMU hardware may fetch these 64 bytes using multiple internal transactions (e.g., four 128-bit bursts), updating or zeroing the entire entry while it is active (P=1) risks a "torn" read. If a hardware fetch occurs simultaneously with the CPU zeroing the entry, the hardware could observe an inconsistent state, leading to unpredictable behavior or spurious faults. Follow the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the PASID entry. 2. Use a dma_wmb() to ensure the cleared bit is visible to hardware before proceeding. 3. Execute the required invalidation sequence (PASID cache, IOTLB, and Device-TLB flush) to ensure the hardware has released all cached references. 4. Only after the flushes are complete, zero out the remaining fields of the PASID entry. Also, add a dma_wmb() in pasid_set_present() to ensure that all other fields of the PASID entry are visible to the hardware before the Present bit is set.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: quota: fix livelock between quotactl and freeze_super When a filesystem is frozen, quotactl_block() enters a retry loop waiting for the filesystem to thaw. It acquires s_umount, checks the freeze state, drops s_umount and uses sb_start_write() - sb_end_write() pair to wait for the unfreeze. However, this retry loop can trigger a livelock issue, specifically on kernels with preemption disabled. The mechanism is as follows: 1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write(). 2. sb_wait_write() calls percpu_down_write(), which initiates synchronize_rcu(). 3. Simultaneously, quotactl_block() spins in its retry loop, immediately executing the sb_start_write() - sb_end_write() pair. 4. Because the kernel is non-preemptible and the loop contains no scheduling points, quotactl_block() never yields the CPU. This prevents that CPU from reaching an RCU quiescent state. 5. synchronize_rcu() in the freezer thread waits indefinitely for the quotactl_block() CPU to report a quiescent state. 6. quotactl_block() spins indefinitely waiting for the freezer to advance, which it cannot do as it is blocked on the RCU sync. This results in a hang of the freezer process and 100% CPU usage by the quota process. While this can occur intermittently on multi-core systems, it is reliably reproducing on a node with the following script, running both the freezer and the quota toggle on the same CPU: # mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount # mount /dev/sda -o quota,usrquota,grpquota a_mount # taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \ xfs_freeze -u a_mount; done" & # taskset -c 3 bash -c "while true; do quotaon a_mount; \ quotaoff a_mount; done" & Adding cond_resched() to the retry loop fixes the issue. It acts as an RCU quiescent state, allowing synchronize_rcu() in percpu_down_write() to complete.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/02bb1500f1479750e6557c8044f6a2d7e9d30c12
- https://git.kernel.org/stable/c/37ccd48cf35f3c8b9f2ea961a7b486b91eb71a82
- https://git.kernel.org/stable/c/414259caf81a397563fc9baca9c0ef856c4a97cf
- https://git.kernel.org/stable/c/53b2314b26b6640a3657cc924de63a1a8f26ac4d
- https://git.kernel.org/stable/c/77449e453dfc006ad738dec55374c4cbc056fd39
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved:
mtd: intel-dg: Fix accessing regions before setting nregions
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type ' [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HCRITICAL9.8
In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix workqueue list corruption by removing work_list
The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()")
changed the work submission logic to unconditionally call
queue_work() with the expectation that queue_work() would
have no effect if work was already pending. The problem is
that a free list of struct iwcm_work is used (for which
struct work_struct is embedded), so each call to queue_work()
is basically unique and therefore does indeed queue the work.
This causes a problem in the work handler which walks the work_list
until it's empty to process entries. This means that a single
run of the work handler could process item N+1 and release it
back to the free list while the actual workqueue entry is still
queued. It could then get reused (INIT_WORK...) and lead to
list corruption in the workqueue logic.
Fix this by just removing the work_list. The workqueue already
does this for us.
This fixes the following error that was observed when stress
testing with ucmatose on an Intel E830 in iWARP mode:
[ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08)
[ 151.466639] ------------[ cut here ]------------
[ 151.466986] kernel BUG at lib/list_debug.c:67!
[ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary)
[ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 151.469192] Workqueue: 0x0 (iw_cm_wq)
[ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100
[ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90
[ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046
[ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027
[ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600
[ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff
[ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68
[ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000
[ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000
[ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0
[ 151.475895] PKRU: 55555554
[ 151.476118] Call Trace:
[ 151.476331]
[ 151.476497] move_linked_works+0x49/0xa0
[ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0
[ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0
[ 151.477479] process_scheduled_works+0x1c8/0x410
[ 151.477823] worker_thread+0x125/0x260
[ 151.478108] ? __pfx_worker_thread+0x10/0x10
[ 151.478430] kthread+0xfe/0x240
[ 151.478671] ? __pfx_kthread+0x10/0x10
[ 151.478955] ? __pfx_kthread+0x10/0x10
[ 151.479240] ret_from_fork+0x208/0x270
[ 151.479523] ? __pfx_kthread+0x10/0x10
[ 151.479806] ret_from_fork_asm+0x1a/0x30
[ 151.480103]
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/38c5b49fffa1b760959af74f11806eeb3ef4706d
- https://git.kernel.org/stable/c/7874eeacfa42177565c01d5198726671acf7adf2
- https://git.kernel.org/stable/c/a6b9e793e74e372daa266fd0d58b751305877897
- https://git.kernel.org/stable/c/eb715133e0ae12514bba4d2d5ce1dee774476056
- https://access.redhat.com/errata/RHSA-2026:27708
- https://access.redhat.com/errata/RHSA-2026:27731
- https://access.redhat.com/errata/RHSA-2026:30129
- https://access.redhat.com/errata/RHSA-2026:30848
- https://access.redhat.com/security/cve/CVE-2026-45898
- https://bugzilla.redhat.com/show_bug.cgi?id=2482031
- https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-45898.json
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache when splitting extent fails When the split extent fails, we might leave some extents still being processed and return an error directly, which will result in stale extent entries remaining in the extent status tree. So drop all of the remaining potentially stale extents if the splitting fails.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/120c6bd7ca9d3e80a968b758cbb3fbd67570f132
- https://git.kernel.org/stable/c/31bf37cf53ede8145e2bc62da803d4506da92975
- https://git.kernel.org/stable/c/337506dc652383c80839edb8d8dcdd8ff2129b4f
- https://git.kernel.org/stable/c/6e54f8dfee359bbd58086c883ea8cffd5312999d
- https://git.kernel.org/stable/c/79b592e8f1b435796cbc2722190368e3e8ffd7a1
- https://git.kernel.org/stable/c/808f3191498f300174523c54cab101e18795ae4e
- https://git.kernel.org/stable/c/dc7c9b9d03a59a7fe483574531327e650a4b4adc
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix netdev memory leak in dpaa2_caam_probe When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in dpaa2") converted embedded net_device to dynamically allocated pointers, it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in dpaa2_dpseci_free() for error paths. This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe due to DPIO devices not being ready yet. The kernel's deferred probe mechanism handles the retry successfully, but the netdevs allocated during the failed probe attempt are never freed, resulting in kmemleak reports showing multiple leaked netdev-related allocations all traced back to dpaa2_caam_probe(). Fix this by preserving the CPU mask of allocated netdevs during setup and using it for cleanup in dpaa2_dpseci_free(). This approach ensures that only the CPUs that actually had netdevs allocated will be cleaned up, avoiding potential issues with CPU hotplug scenarios.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/4b6fb0b6124f558131e502e3ffd03e6583b3ace6
- https://git.kernel.org/stable/c/74b5a88318db97d51bb40f774736553c2acd1514
- https://git.kernel.org/stable/c/8005843369723d9c8975b7c4202d1b85d6125302
- https://git.kernel.org/stable/c/81d3688c9a2158329391e08f2d0b8ba204216044
- https://git.kernel.org/stable/c/83c27fdd696ac13d023ef7a0345301be93209c53
- https://git.kernel.org/stable/c/8796910131a32ff29275052df768ef022929a394
- https://git.kernel.org/stable/c/cb5c743936edcebc51880eeb6bf04979b5c9438b
HIGH7.1
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer") and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args"). Fix these prototypes by adding the correct memory access flags.
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device
hotplug safe") restructured the EEH driver to improve synchronization
with the PCI hotplug layer.
However, it inadvertently moved pci_lock_rescan_remove() outside its
intended scope in eeh_handle_normal_event(), leading to broken PCI
error reporting and improper EEH event triggering. Specifically,
eeh_handle_normal_event() acquired pci_lock_rescan_remove() before
calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to
acquire the same lock internally, causing nested locking and disrupting
normal EEH event handling paths.
This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(),
with two public wrappers:
eeh_pe_bus_get() with locking enabled.
eeh_pe_bus_get_nolock() that skips locking.
Callers that already hold pci_lock_rescan_remove() now use
eeh_pe_bus_get_nolock() to avoid recursive lock acquisition.
Additionally, pci_lock_rescan_remove() calls are restored to the correct
position—after eeh_pe_bus_get() and immediately before iterating affected
PEs and devices. This ensures EEH-triggered PCI removes occur under proper
bus rescan locking without recursive lock contention.
The eeh_pe_loc_get() function has been split into two functions:
eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE.
eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location
code for given bus.
This resolves lockdep warnings such as:
[ 84.964298] [ T928] ============================================
[ 84.964304] [ T928] WARNING: possible recursive locking detected
[ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted
[ 84.964315] [ T928] --------------------------------------------
[ 84.964320] [ T928] eehd/928 is trying to acquire lock:
[ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964342] [ T928]
but task is already holding lock:
[ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964357] [ T928]
other info that might help us debug this:
[ 84.964363] [ T928] Possible unsafe locking scenario:
[ 84.964367] [ T928] CPU0
[ 84.964370] [ T928] ----
[ 84.964373] [ T928] lock(pci_rescan_remove_lock);
[ 84.964378] [ T928] lock(pci_rescan_remove_lock);
[ 84.964383] [ T928]
*** DEADLOCK ***
[ 84.964388] [ T928] May be due to missing lock nesting notation
[ 84.964393] [ T928] 1 lock held by eehd/928:
[ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964408] [ T928]
stack backtrace:
[ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY
[ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries
[ 84.964419] [ T928] Call Trace:
[ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable)
[ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440
[ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80
[ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410
[ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050
[ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40
[ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0
[ 84.964442] [ T928] [c0000011a7157e50] [c00000
---truncated---
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/6e6561231c6cfc32c5631aeecc0928ff2b14265c
- https://git.kernel.org/stable/c/788dd28fd49610d6047cbb15dbf1186afffdfbaf
- https://git.kernel.org/stable/c/815a8d2feb5615ae7f0b5befd206af0b0160614c
- https://git.kernel.org/stable/c/87a1f93986aa1500b85aeff16b0b71c29ea116ea
- https://git.kernel.org/stable/c/89810e2d80281d42f855fac813786758ee16e323
- https://git.kernel.org/stable/c/b85ee287bfe52c6b2d9b41758b5e0d08679d5b39
- https://git.kernel.org/stable/c/f49faa4a64f8ac0e38983e606075b25dfcfc9ad4
- https://git.kernel.org/stable/c/f8b16d5764ee1e78c1ef333017ad383ffe76fcdc
MEDIUM4.7
In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path
icmp_route_lookup() performs multiple route lookups to find a suitable
route for sending ICMP error messages, with special handling for XFRM
(IPsec) policies.
The lookup sequence is:
1. First, lookup output route for ICMP reply (dst = original src)
2. Pass through xfrm_lookup() for policy check
3. If blocked (-EPERM) or dst is not local, enter "reverse path"
4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec
which reverses the original packet's flow (saddr<->daddr swapped)
5. If fl4_dec.saddr is local (we are the original destination), use
__ip_route_output_key() for output route lookup
6. If fl4_dec.saddr is NOT local (we are a forwarding node), use
ip_route_input() to simulate the reverse packet's input path
7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag
The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr
(original packet's source) as destination. If this address becomes local
between the initial check and ip_route_input() call (e.g., due to
concurrent "ip addr add"), ip_route_input() returns a LOCAL route with
dst.output set to ip_rt_bug.
This route is then used for ICMP output, causing dst_output() to call
ip_rt_bug(), triggering a WARN_ON:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1
Call Trace:
ip_push_pending_frames+0x202/0x240
icmp_push_reply+0x30d/0x430
__icmp_send+0x1149/0x24f0
ip_options_compile+0xa2/0xd0
ip_rcv_finish_core+0x829/0x1950
ip_rcv+0x2d7/0x420
__netif_receive_skb_one_core+0x185/0x1f0
netif_receive_skb+0x90/0x450
tun_get_user+0x3413/0x3fb0
tun_chr_write_iter+0xe4/0x220
...
Fix this by checking rt2->rt_type after ip_route_input(). If it's
RTN_LOCAL, the route cannot be used for output, so treat it as an error.
The reproducer requires kernel modification to widen the race window,
making it unsuitable as a selftest. It is available at:
https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1c9ef28f643cce34a6a6c36c8f4d6d60a60db7e1
- https://git.kernel.org/stable/c/2c1f59005da9dd4b07b26984fd719e36557dc57c
- https://git.kernel.org/stable/c/423ce12d10b426709489d6b84fdaa6d2f31c5652
- https://git.kernel.org/stable/c/81b84de32bb27ae1ae2eb9acf0420e9d0d14bf00
- https://git.kernel.org/stable/c/9a95ec9144eeff1fc6fbcc21b677e322c6f1430b
- https://git.kernel.org/stable/c/b04061f89ffc6168e7ec3c71d0086ec3c3797228
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => boom!) -> devlink_health_reporter_recover -> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx -> mlx5e_tx_reporter_err_cqe_recover The same pattern exists in: mlx5e_reporter_rx_timeout mlx5e_reporter_tx_ptpsq_unhealthy mlx5e_reporter_tx_timeout Fix these by moving the netdev_trylock calls from the work handlers lower in the call stack, in the respective recovery functions, where they are actually necessary.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Drop __initconst from gates Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs are no longer just used for initialization/registration, but also at runtime. So drop __initconst annotations.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/3c2ae79fb19dfd67341c14f1e78a5f1744eacfe2
- https://git.kernel.org/stable/c/5ae9da022ee3c97e6469eabcddce9271501ddbad
- https://git.kernel.org/stable/c/756c93d6df7c3bc599f6590b8e5afead6a41de1c
- https://git.kernel.org/stable/c/87bf646921430e303176edc4eb07c30160361b73
- https://git.kernel.org/stable/c/da379ca16af3722f159860d91a99cb6976a7500f
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]---
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/49c99dc247ebf7361db9dbdade3dcebfffaf2c22
- https://git.kernel.org/stable/c/56289298431ed76700b9aac27a3b1d929fe61b8d
- https://git.kernel.org/stable/c/87e4b043b98a1d269be0b812f383881abee0ca45
- https://git.kernel.org/stable/c/94c742614899ff18a6b3e6f3cfbe7b9f36c865f3
- https://git.kernel.org/stable/c/d637f6ec149ffd2f8257bcc261561dc2e44dbb8c
- https://git.kernel.org/stable/c/fc086c0ce3db0eefbbeb66a5b1e626296336e33a
- https://git.kernel.org/stable/c/ff02bd303d2d78051771db51119d66c0cf442f47
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at() splits this extent, it truncates the existing extent and then inserts a new one. During this process, this extent status entry may be shrunk, and calls to ext4_find_extent() and ext4_cache_extents() may occur, which could potentially insert the truncated range as a hole into the extent status tree. After the split is completed, this hole is not replaced with the correct status. [UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent [UUUUUUU|HHHHHHHH] extent status tree H: hole Then, the outer calling functions will not correct this remaining hole extent either. Finally, if we perform a delayed buffer write on this latter part, it will re-insert the delayed extent and cause an error in space accounting. In adition, if the unwritten extent cache is not shrunk during the splitting, ext4_cache_extents() also conflicts with existing extents when caching extents. In the future, we will add checks when caching extents, which will trigger a warning. Therefore, Do not cache extents that are being split.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/4c2d9dac4d328244f9365b0a1fa27ec802821820
- https://git.kernel.org/stable/c/5b1f4290453314e11cd8e15c7baa8a9b76c19b23
- https://git.kernel.org/stable/c/692103feca376ae4298c92aa8828015d20f1d87b
- https://git.kernel.org/stable/c/8302b5b4aacdbb378f7b1216bb2ee782b5142415
- https://git.kernel.org/stable/c/8b4b19a2f96348d70bfa306ef7d4a13b0bcbea79
- https://git.kernel.org/stable/c/93b2ebbbcb2e63cfc21a1946dfe91d3aa7952036
- https://git.kernel.org/stable/c/96007fd3c106aea773c1afae2d6f64cceb6da208
- https://git.kernel.org/stable/c/9a2b95cdaf07785e2739199037bd9c0863ccc1be
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: always update mdb_n_entries for vlan contexts
syzbot triggered a warning[1] about the number of mdb entries in a context.
It turned out that there are multiple ways to trigger that warning today
(some got added during the years), the root cause of the problem is that
the increase is done conditionally, and over the years these different
conditions increased so there were new ways to trigger the warning, that is
to do a decrease which wasn't paired with a previous increase.
For example one way to trigger it is with flush:
$ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1
$ ip l add dumdum up master br0 type dummy
$ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1
$ ip link set dev br0 down
$ ip link set dev br0 type bridge mcast_vlan_snooping 1
^^^^ this will enable snooping, but will not update mdb_n_entries
because in __br_multicast_enable_port_ctx() we check !netif_running
$ bridge mdb flush dev br0
^^^ this will trigger the warning because it will delete the pg which
we added above, which will try to decrease mdb_n_entries
Fix the problem by removing the conditional increase and always keep the
count up-to-date while the vlan exists. In order to do that we have to
first initialize it on port-vlan context creation, and then always increase
or decrease the value regardless of mcast options. To keep the current
behaviour we have to enforce the mdb limit only if the context is port's or
if the port-vlan's mcast snooping is enabled.
[1]
------------[ cut here ]------------
n == 0
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043
Modules linked in:
CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline]
RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline]
RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825
Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b
RSP: 0018:ffffc9000c207220 EFLAGS: 00010293
RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c
R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800
R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238
FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0
Call Trace:
br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline]
br_mdb_flush net/bridge/br_mdb.c:1544 [inline]
br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561
rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1
rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socke
---truncated---
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/45525fdfd4cb612d7b414dd5cfa1f43892a7cd71
- https://git.kernel.org/stable/c/724a405ce0309676f1e993c173382b4c4a022beb
- https://git.kernel.org/stable/c/8b769e311a86bb9d15c5658ad283b86fc8f080a2
- https://git.kernel.org/stable/c/d0fdad1bdd21a358cc2c85da3681ae27b86ce6ce
- https://git.kernel.org/stable/c/fae260fc84e1eae8f590c7907e53e8768df2d986
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: Revert "hwmon: (ibmpex) fix use-after-free in high/low store" This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d. Jean Delvare points out that the patch does not completely fix the reported problem, that it in fact introduces a (new) race condition, and that it may actually not be needed in the first place. Various AI reviews agree. Specific and relevant AI feedback: " This reordering sets the driver data to NULL before removing the sensor attributes in the loop below. ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but does not check if it is NULL before dereferencing it to access data->sensors[]. If a userspace process reads a sensor file (like temp1_input) while this delete function is running, could it race with the dev_set_drvdata(..., NULL) call here and crash in ibmpex_show_sensor()? Would it be safer to keep the original order where device_remove_file() is called before clearing the driver data? device_remove_file() should wait for any active sysfs callbacks to complete, which might already prevent the use-after-free this patch intends to fix. " Revert the offending patch. If it can be shown that the originally reported alleged race condition does indeed exist, it can always be re-introduced with a complete fix.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/05112ba67c824ab416cd54307c0b50aba9f0047a
- https://git.kernel.org/stable/c/14a38784e09aebc21207dc32fffa05247fc3dd64
- https://git.kernel.org/stable/c/894d9c7aab68fd0c70c78b1d03c8fa589fb0f67d
- https://git.kernel.org/stable/c/8bde3e395a85017f12af2b0ba5c3684f5af9c006
- https://git.kernel.org/stable/c/914b47c9b824d3d74f31c764163edf93302100b1
- https://git.kernel.org/stable/c/efd68429f23fb4015b0ebc2392334059e06fad18
- https://git.kernel.org/stable/c/f448acd86835a650f9ea83460b9ca347d3aafba5
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: fat: avoid parent link count underflow in rmdir Corrupted FAT images can leave a directory inode with an incorrect i_nlink (e.g. 2 even though subdirectories exist). rmdir then unconditionally calls drop_nlink(dir) and can drive i_nlink to 0, triggering the WARN_ON in drop_nlink(). Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the parent link count when it is at least 3, otherwise report a filesystem error.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/17866f8a0822d414cb02e621cf003a7d04396ef8
- https://git.kernel.org/stable/c/7fe0de287e931e07cb96ecf1f449b2ebdb0e1115
- https://git.kernel.org/stable/c/8cafcb881364af5ef3a8b9fed4db254054033d8a
- https://git.kernel.org/stable/c/955c5d670b5ae07c78f4345e23a895638db96ce1
- https://git.kernel.org/stable/c/9894c79fd9466612d0514be157b5c30cd93aa645
- https://git.kernel.org/stable/c/cd569b87378b9c33ae13c23d6bb9d205d66f7c4b
- https://git.kernel.org/stable/c/d0bb592fa9def2bace90ac8926c0a1d6fa8c1aa0
- https://git.kernel.org/stable/c/d3b7ffa90f613938128432c7b2f35b7aa4bdd86b
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: sbs-battery: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. Keep the old behavior of just printing a warning in case of any failures during the IRQ request and finishing the probe successfully.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/14d4dee5d8fb361bfff275832087254beab66d72
- https://git.kernel.org/stable/c/2078830c32d1e49ac942c6f8c21f35c806ae5e94
- https://git.kernel.org/stable/c/8010b745b436c3e1ca5dd960aa29fa3e0f6d8841
- https://git.kernel.org/stable/c/82d3eb97a976c9d56bb92b241397610e57a9c629
- https://git.kernel.org/stable/c/861dda7a9074c0ff67788928165ae39d7f647491
- https://git.kernel.org/stable/c/8d59cf3887fbabacef53bfba473e33e8a8d9d07b
- https://git.kernel.org/stable/c/ca7dd71773e4e050b0fb98768b7eae60f8d1f38b
- https://git.kernel.org/stable/c/f1f472b14ad56104ba228b8fbec60d5b21829913
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ipvs: do not keep dest_dst if dev is going down There is race between the netdev notifier ip_vs_dst_event() and the code that caches dst with dev that is going down. As the FIB can be notified for the closed device after our handler finishes, it is possible valid route to be returned and cached resuling in a leaked dev reference until the dest is not removed. To prevent new dest_dst to be attached to dest just after the handler dropped the old one, add a netif_running() check to make sure the notifier handler is not currently running for device that is closing.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - don't deref NULL sk_socket member after tcp_close() When deleting a peer in case of keepalive expiration, the peer is removed from the OpenVPN hashtable and is temporary inserted in a "release list" for further processing. This happens in: ovpn_peer_keepalive_work() unlock_ovpn(release_list) This processing includes detaching from the socket being used to talk to this peer, by restoring its original proto and socket ops/callbacks. In case of TCP it may happen that, while the peer is sitting in the release list, userspace decides to close the socket. This will result in a concurrent execution of: tcp_close(sk) __tcp_close(sk) sock_orphan(sk) sk_set_socket(sk, NULL) The last function call will set sk->sk_socket to NULL. When the releasing routine is resumed, ovpn_tcp_socket_detach() will attempt to dereference sk->sk_socket to restore its original ops member. This operation will crash due to sk->sk_socket being NULL. Fix this race condition by testing-and-accessing sk->sk_socket atomically under sk->sk_callback_lock.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: sched/rt: Skip currently executing CPU in rto_next_cpu() CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound RT task, and a CFS task stuck in kernel space. When other CPUs switch from RT to non-RT tasks, RT load balancing (LB) is triggered; with HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution of rto_push_irq_work_func. During push_rt_task on CPU0, if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED and after the push operation completes, CPU0 calls rto_next_cpu(). Since only CPU0 is overloaded in this scenario, rto_next_cpu() should ideally return -1 (no further IPI needed). However, multiple CPUs invoking tell_cpu_to_push() during LB increments rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory && rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop, which triggers a CPU hardlockup due to continuous self-interrupts. The trigging scenario is as follows: cpu0 cpu1 cpu2 pull_rt_task tell_cpu_to_push <------------irq_work_queue_on rto_push_irq_work_func push_rt_task resched_curr(rq) pull_rt_task rto_next_cpu tell_cpu_to_push <-------------------------- atomic_inc(rto_loop_next) rd->rto_loop != next rto_next_cpu irq_work_queue_on rto_push_irq_work_func Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu(). This solution has been verified to effectively eliminate spurious self-IPIs and prevent CPU hardlockup scenarios.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/16ca9f3117e9a294646c897daf08a5ab546c711b
- https://git.kernel.org/stable/c/3b3c672a66db3de3b40f8a7057864bc1f874ede3
- https://git.kernel.org/stable/c/52aeb1e07ec223caf212f036817976c98d2aa250
- https://git.kernel.org/stable/c/8ad5577b2d4acfd83f03d97a0aece2d18aac5f07
- https://git.kernel.org/stable/c/94894c9c477e53bcea052e075c53f89df3d2a33e
- https://git.kernel.org/stable/c/9f25edc5a20cb52a5abbf25f0724bb4732b81801
- https://git.kernel.org/stable/c/a6a73403733e86748421f2eeaf028c85683ef896
- https://git.kernel.org/stable/c/d57d0746276a88ea43a2cc62b849fd8a95e32e41
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: ext4: fix dirtyclusters double decrement on fs shutdown fstests test generic/388 occasionally reproduces a warning in ext4_put_super() associated with the dirty clusters count: WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4] Tracing the failure shows that the warning fires due to an s_dirtyclusters_counter value of -1. IOW, this appears to be a spurious decrement as opposed to some sort of leak. Further tracing of the dirty cluster count deltas and an LLM scan of the resulting output identified the cause as a double decrement in the error path between ext4_mb_mark_diskspace_used() and the caller ext4_mb_new_blocks(). First, note that generic/388 is a shutdown vs. fsstress test and so produces a random set of operations and shutdown injections. In the problematic case, the shutdown triggers an error return from the ext4_handle_dirty_metadata() call(s) made from ext4_mb_mark_context(). The changed value is non-zero at this point, so ext4_mb_mark_diskspace_used() does not exit after the error bubbles up from ext4_mb_mark_context(). Instead, the former decrements both cluster counters and returns the error up to ext4_mb_new_blocks(). The latter falls into the !ar->len out path which decrements the dirty clusters counter a second time, creating the inconsistency. To avoid this problem and simplify ownership of the cluster reservation in this codepath, lift the counter reduction to a single place in the caller. This makes it more clear that ext4_mb_new_blocks() is responsible for acquiring cluster reservation (via ext4_claim_free_clusters()) in the !delalloc case as well as releasing it, regardless of whether it ends up consumed or returned due to failure.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/3924aea2c33df3864929c1acd178bfc29d8f005f
- https://git.kernel.org/stable/c/523d5a4df3c649fa305c89efb552ec62a1ce9d3d
- https://git.kernel.org/stable/c/55576fa14771d33994c29a9ae960e07bb3f56c20
- https://git.kernel.org/stable/c/61e372122b6d95aec940fdaea0a16f988f359897
- https://git.kernel.org/stable/c/81982a11406c5da6c6e2b188028e7056e16b7128
- https://git.kernel.org/stable/c/94a8cea54cd935c54fa2fba70354757c0fc245e3
- https://git.kernel.org/stable/c/ca408af08544d96769c93a3d81a7f63f61129e95
- https://git.kernel.org/stable/c/dbc4e10619ed87a50e637b96f2e574df36a7a769
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: Fix memory leak in mtd_parser_tplink_safeloader_parse() The function mtd_parser_tplink_safeloader_parse() allocates buf via mtd_parser_tplink_safeloader_read_table(). If the allocation for parts[idx].name fails inside the loop, the code jumps to the err_free label without freeing buf, leading to a memory leak. Fix this by freeing the temporary buffer buf in the err_free label. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/0f5e62ea5c43146eacdc6861cb1022ffae1b79bc
- https://git.kernel.org/stable/c/971e9c53aed82f17a9c6a65daa4e21cc15eba5b1
- https://git.kernel.org/stable/c/980ce2b02dd06a4fdf5fee38b2e14becf9cf7b8b
- https://git.kernel.org/stable/c/e97f5fac8ce9a6b9ec724c97d86b0985e915fdca
- https://git.kernel.org/stable/c/ec121ad626c319085f6d40a52cd04e99b4554926
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function allocates memory for the device path using kobject_get_path(). If the length of the device path exceeds the output buffer length, the function returns -ENOSPC but does not free the allocated memory, resulting in a memory leak. Add a kfree() call to the error path to ensure the allocated memory is properly freed. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: enable basic endpoint checking catc_probe() fills three URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt status A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a catc_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls after usb_set_interface() to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time. Similar to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") which fixed the issue in rtl8150.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/163d04897e57633c5d2e69734e4e4b22bb63f50d
- https://git.kernel.org/stable/c/1a42cfced8900d33d032c7ec338484855b61b8cc
- https://git.kernel.org/stable/c/36c28b028efba0f42218d41fed12c47ce217c1f1
- https://git.kernel.org/stable/c/9e7021d2aeae57c323a6f722ed7915686cdcc123
- https://git.kernel.org/stable/c/a488001a8197da4f9c413eec8f6acbff71c60145
- https://git.kernel.org/stable/c/ac7739b78ded519e1d9919a814da3b34120bec8c
- https://git.kernel.org/stable/c/eade522d3e6ac3f3bfb51bfa5b5b4b32bd0b846f
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: thermal/of: Fix reference leak in thermal_of_cm_lookup() In thermal_of_cm_lookup(), tr_np is obtained via of_parse_phandle(), but never released. Use the __free(device_node) cleanup attribute to automatically release the node and fix the leak. [ rjw: Changelog edits ]
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM4.7
In the Linux kernel, the following vulnerability has been resolved: bpf: Require frozen map for calculating map hash Currently, bpf_map_get_info_by_fd calculates and caches the hash of the map regardless of the map's frozen state. This leads to a TOCTOU bug where userspace can call BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map contents before freezing. Therefore, a trusted loader can be tricked into verifying the stale hash while loading the modified contents. Fix this by returning -EPERM if the map is not frozen when the hash is requested. This ensures the hash is only generated for the final, immutable state of the map.
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix memory leak on codec_info allocation failure In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is allocated via kzalloc(). If the subsequent allocation for inst->codec_info fails, the functions return -ENOMEM without freeing the previously allocated instance, causing a memory leak. Fix this by calling kfree() on the instance in this error path to ensure it is properly released.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: ovpn: fix possible use-after-free in ovpn_net_xmit When building the skb_list in ovpn_net_xmit, skb_share_check will free the original skb if it is shared. The current implementation continues to use the stale skb pointer for subsequent operations: - peer lookup, - skb_dst_drop (even though all segments produced by skb_gso_segment will have a dst attached), - ovpn_peer_stats_increment_tx. Fix this by moving the peer lookup and skb_dst_drop before segmentation so that the original skb is still valid when used. Return early if all segments fail skb_share_check and the list ends up empty. Also switch ovpn_peer_stats_increment_tx to use skb_list.next; the next patch fixes the stats logic.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Hold mm structure across iommu_sva_unbind_device() Some tests trigger a crash in iommu_sva_unbind_device() due to accessing iommu_mm after the associated mm structure has been freed. Fix this by taking an explicit reference to the mm structure after successfully binding the device, and releasing it only after the device is unbound. This ensures the mm remains valid for the entire SVA bind/unbind lifetime.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HHIGH7.3
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tcx/netkit detach permissions when prog fd isn't given This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
CVSS 3.xВЫСОКАЯ 7.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve id of register in sync_linked_regs() sync_linked_regs() copies the id of known_reg to reg when propagating bounds of known_reg to reg using the off of known_reg, but when known_reg was linked to reg like: known_reg = reg ; both known_reg and reg get same id known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST now when a call to sync_linked_regs() happens, let's say with the following: if known_reg >= 10 goto pc+2 known_reg's new bounds are propagated to reg but now reg gets BPF_ADD_CONST from the copy. This means if another link to reg is created like: another_reg = reg ; another_reg should get the id of reg but assign_scalar_id_before_mov() sees BPF_ADD_CONST on reg and assigns a new id to it. As reg has a new id now, known_reg's link to reg is broken. If we find new bounds for known_reg, they will not be propagated to reg. This can be seen in the selftest added in the next commit: 0: (85) call bpf_get_prandom_u32#7 ; R0=scalar() 1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) 6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf)) 8: (37) r0 /= 0 div by zero When 4 is verified, r1's bounds are propagated to r0 but r0 also gets BPF_ADD_CONST (bug). When 5 is verified, r0 gets a new id (2) and its link with r1 is broken. After 6 we know r1 has bounds [14, 259] and therefore r0 should have bounds [10, 255], therefore the branch at 7 is always taken. But because r0's id was changed to 2, r1's new bounds are not propagated to r0. The verifier still thinks r0 has bounds [6, 255] before 7 and execution can reach div by zero. Fix this by preserving id in sync_linked_regs() like off and subreg_def.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation
I have been observing a number of systems aborting at
insert_dev_extents() in btrfs_create_pending_block_groups(). The
following is a sample stack trace of such an abort coming from forced
chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this
can theoretically happen to any DUP chunk allocation.
[81.801] ------------[ cut here ]------------
[81.801] BTRFS: Transaction aborted (error -17)
[81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319
[81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk
[81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE
[81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs]
[81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282
[81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000
[81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0
[81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007
[81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000
[81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000
[81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000
[81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0
[81.810] Call Trace:
[81.810]
[81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs]
[81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs]
[81.811] kernfs_fop_write_iter+0x15f/0x240
[81.812] vfs_write+0x264/0x500
[81.812] ksys_write+0x6c/0xe0
[81.812] do_syscall_64+0x66/0x770
[81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[81.813] RIP: 0033:0x7fec6be66197
[81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197
[81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001
[81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000
[81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002
[81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0
[81.817]
[81.817] irq event stamp: 20039
[81.818] hardirqs last enabled at (20047): [] __up_console_sem+0x52/0x60
[81.818] hardirqs last disabled at (20056): [] __up_console_sem+0x37/0x60
[81.819] softirqs last enabled at (19470): [] __irq_exit_rcu+0x96/0xc0
[81.819] softirqs last disabled at (19463): [] __irq_exit_rcu+0x96/0xc0
[81.820] ---[ end trace 0000000000000000 ]---
[81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists
Inspecting these aborts with drgn, I observed a pattern of overlapping
chunk_maps. Note how stripe 1 of the first chunk overlaps in physical
address with stripe 0 of the second chunk.
Physical Start Physical End Length Logical Type Stripe
----------------------------------------------------------------------------------------------------
0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2
0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2
Now how could this possibly happen? All chunk allocation is
---truncated---
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the entry size ('esize') is retrieved from the log record without adequate bounds checking. Specifically, the code calculates the end of the entry ('e2') using: e2 = Add2Ptr(e1, esize); It then calculates the size for memmove using 'PtrOffset(e2, ...)', which subtracts the end pointer from the buffer limit. If 'esize' is maliciously large, 'e2' exceeds the used buffer size. This results in a negative offset which, when cast to size_t for memmove, interprets as a massive unsigned integer, leading to a heap buffer overflow. This commit adds a check to ensure that the entry size ('esize') strictly fits within the remaining used space of the index header before performing memory operations.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/36c03f7f177b34d51f1cf1d2304b1074607bf4b0
- https://git.kernel.org/stable/c/78942172d5bff4d4afed8674abc09cc560ce44a0
- https://git.kernel.org/stable/c/a584b9d1059b29e97e17c919274e9adfb846f2a0
- https://git.kernel.org/stable/c/b271c9cb85927210b1b799e55ee7f702d12b4336
- https://git.kernel.org/stable/c/b2bc7c44ed1779fc9eaab9a186db0f0d01439622
- https://git.kernel.org/stable/c/c065541b71b79874c83d418a9acd18ad5826339b
- https://git.kernel.org/stable/c/f3b437a4c3e022a1449658ae9f3dd34859894513
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: goldfish: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/0b29ffe4090a3fc7a7649de20e1eb1e53adddac7
- https://git.kernel.org/stable/c/33751e28842bf5aee5ef7b2b8d5e456a069095cb
- https://git.kernel.org/stable/c/4350505e82b4f972ddb788e1c712c557c38859d0
- https://git.kernel.org/stable/c/589d4fe56713c6344cd9f8939f9c7621c85f0966
- https://git.kernel.org/stable/c/77ea437faa4c06362e3ecfd2d7264eaa7ac1e82c
- https://git.kernel.org/stable/c/8c89aade8335e26a6a7dcda18992d15f51943927
- https://git.kernel.org/stable/c/b2ce982e2e0c888dc55c888ad0e20ea04daf2e6b
- https://git.kernel.org/stable/c/bad8b61eb5059acd88349680e47839342dc89e94
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: crypto: inside-secure/eip93 - fix kernel panic in driver detach During driver detach, the same hash algorithm is unregistered multiple times due to a wrong iterator.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: gpib: Fix memory leak in ni_usb_init() In ni_usb_init(), if ni_usb_setup_init() fails, the function returns -EFAULT without freeing the allocated writes buffer, leading to a memory leak. Additionally, ni_usb_setup_init() returns 0 on failure, which causes ni_usb_init() to return -EFAULT, an inappropriate error code for this situation. Fix the leak by freeing writes in the error path. Modify ni_usb_setup_init() to return -EINVAL on failure and propagate this error code in ni_usb_init().
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix oops when split header is enabled For GMAC4, when split header is enabled, in some rare cases, the hardware does not fill buf2 of the first descriptor with payload. Thus we cannot assume buf2 is always fully filled if it is not the last descriptor. Otherwise, the length of buf2 of the second descriptor will be calculated wrong and cause an oops: Unable to handle kernel paging request at virtual address ffff00019246bfc0 ... x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000 Call trace: dcache_inval_poc+0x28/0x58 (P) dma_direct_sync_single_for_cpu+0x38/0x6c __dma_sync_single_for_cpu+0x34/0x6c stmmac_napi_poll_rx+0x8f0/0xb60 __napi_poll.constprop.0+0x30/0x144 net_rx_action+0x160/0x274 handle_softirqs+0x1b8/0x1fc ... To fix this, the PL bit-field in RDES3 register is used for all descriptors, whether it is the last descriptor or not.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure get_burstcount() can return -EBUSY on timeout. When this happens, the function returns directly without releasing the locality that was acquired at the beginning of tpm_tis_i2c_send(). Use goto out_err to ensure proper cleanup when get_burstcount() fails.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1a22048c1117cdfac185ba450aba67ed6b65dc87
- https://git.kernel.org/stable/c/1bb8f8826d0748b4b92a98fb6b6dfe52081739f5
- https://git.kernel.org/stable/c/2f7a665e1323359d99c74301d1e180f5e2c40181
- https://git.kernel.org/stable/c/8f124c5582d443ac9fb690db26d08cab5d6ba76e
- https://git.kernel.org/stable/c/948966e546f29af04391d98b8e378e4a7670c1c1
- https://git.kernel.org/stable/c/a61b8412e3eb8b71646dba867e8252d8560a1a27
- https://git.kernel.org/stable/c/bbd6e97c836cbeb9606d7b7e5dcf8a1d89525713
- https://git.kernel.org/stable/c/c24c9c4cab11858f22f309521ba7ea5b1e7385f2
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: ext4: fix e4b bitmap inconsistency reports A bitmap inconsistency issue was observed during stress tests under mixed huge-page workloads. Ext4 reported multiple e4b bitmap check failures like: ext4_mb_complex_scan_group:2508: group 350, 8179 free clusters as per group info. But got 8192 blocks Analysis and experimentation confirmed that the issue is caused by a race condition between page migration and bitmap modification. Although this timing window is extremely narrow, it is still hit in practice: folio_lock ext4_mb_load_buddy __migrate_folio check ref count folio_mc_copy __filemap_get_folio folio_try_get(folio) ...... mb_mark_used ext4_mb_unload_buddy __folio_migrate_mapping folio_ref_freeze folio_unlock The root cause of this issue is that the fast path of load_buddy only increments the folio's reference count, which is insufficient to prevent concurrent folio migration. We observed that the folio migration process acquires the folio lock. Therefore, we can determine whether to take the fast path in load_buddy by checking the lock status. If the folio is locked, we opt for the slow path (which acquires the lock) to close this concurrency window. Additionally, this change addresses the following issues: When the DOUBLE_CHECK macro is enabled to inspect bitmap-related issues, the following error may be triggered: corruption in group 324 at byte 784(6272): f in copy != ff on disk/prealloc Analysis reveals that this is a false positive. There is a specific race window where the bitmap and the group descriptor become momentarily inconsistent, leading to this error report: ext4_mb_load_buddy ext4_mb_load_buddy __filemap_get_folio(create|lock) folio_lock ext4_mb_init_cache folio_mark_uptodate __filemap_get_folio(no lock) ...... mb_mark_used mb_mark_used_double mb_cmp_bitmaps mb_set_bits(e4b->bd_bitmap) folio_unlock The original logic assumed that since mb_cmp_bitmaps is called when the bitmap is newly loaded from disk, the folio lock would be sufficient to prevent concurrent access. However, this overlooks a specific race condition: if another process attempts to load buddy and finds the folio is already in an uptodate state, it will immediately begin using it without holding folio lock.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/29a07d691d282faf38c33d4b61839b89399110f9
- https://git.kernel.org/stable/c/57e83bfbe1e412ac42daced2086f3c6f9a17bba0
- https://git.kernel.org/stable/c/bdc56a9c46b2a99c12313122b9352b619a2e719e
- https://git.kernel.org/stable/c/c05033cfc5c7699cd4df8d48cef94d01da755f24
- https://git.kernel.org/stable/c/f29709a7a3fc38f5015d850504762cdef0e151f9
HIGH7.1
In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains.
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:HHIGH7.5
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down context entry When tearing down a context entry, the current implementation zeros the entire 128-bit entry using multiple 64-bit writes. This creates a window where the hardware can fetch a "torn" entry — where some fields are already zeroed while the 'Present' bit is still set — leading to unpredictable behavior or spurious faults. While x86 provides strong write ordering, the compiler may reorder writes to the two 64-bit halves of the context entry. Even without compiler reordering, the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Align with the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the context entry first to signal the transition of ownership from hardware to software. 2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU. 3. Perform the required cache and context-cache invalidation to ensure hardware no longer has cached references to the entry. 4. Fully zero out the entry only after the invalidation is complete. Also, add a dma_wmb() to context_set_present() to ensure the entry is fully initialized before the 'Present' bit becomes visible.
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: ab8500: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding") introduced this issue during a refactorization. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/43cbb78ee047b9b12d096d40e3be265969d4c1f8
- https://git.kernel.org/stable/c/46dbda27b028d78087667e8280966b99cec015ca
- https://git.kernel.org/stable/c/551672981fe227122258a25a385a05f5c0746ad6
- https://git.kernel.org/stable/c/709db4b476e254579d9c48ec34d397a41ca0c407
- https://git.kernel.org/stable/c/847eeb6c0efcd76c7def73857cf798a4fcd8f79b
- https://git.kernel.org/stable/c/c4af8a98bb52825a5331ae1d0604c0ea6956ba4b
- https://git.kernel.org/stable/c/f50433f2603def08b21a4bf2fd238687fb5cbde9
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/18a7bbd11f17a7cd4c42fd5955d3675d68c692df
- https://git.kernel.org/stable/c/7e4b612fe7a960d610c20260c9ee220bddd1b215
- https://git.kernel.org/stable/c/c9be63d565789b56ca7b0197e2cb78a3671f95a8
- https://git.kernel.org/stable/c/d1370ef2ecf7d4df25e3e1e430cd191b1e7f8596
- https://git.kernel.org/stable/c/e87c73a80a12d337cf5f493c0956f6c2c9eafd80
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_ext_shift_extents() In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the function returns immediately without releasing the path obtained via ext4_find_extent(), leading to a memory leak. Fix this by jumping to the out label to ensure the path is properly released.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/12615ab4bfb69678e5d961b28bb70040299e51b1
- https://git.kernel.org/stable/c/1bce219ee5512cf179ba40cf114945a14a16e21f
- https://git.kernel.org/stable/c/2f4b1052246ca646bb17bfe0f53df2fdf9729b58
- https://git.kernel.org/stable/c/4a79fde8db7eba7f1128d971ceba4e3c9ac84aec
- https://git.kernel.org/stable/c/7e807cb8603b7664fa630a696cd891d9a03c248d
- https://git.kernel.org/stable/c/afc5e61e1a07b2b833bd72cbee36ecce9cd901e2
- https://git.kernel.org/stable/c/bd7b52557e4a3ccd7595fdb3a585f1257de57935
- https://git.kernel.org/stable/c/ca81109d4a8f192dc1cbad4a1ee25246363c2833
MEDIUM4.7
In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever.
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req() The starfive_aes_aead_do_one_req() function allocates rctx->adata with kzalloc() but fails to free it if sg_copy_to_buffer() or starfive_aes_hw_init() fails, which lead to memory leaks. Since rctx->adata is unconditionally freed after the write_adata operations, ensure consistent cleanup by freeing the allocation in these earlier error paths as well. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a potential use-after-free of BTF object Refcounting in the check_pseudo_btf_id() function is incorrect: the __check_pseudo_btf_id() function might get called with a zero refcounted btf. Fix this, and patch related code accordingly. v3: rephrase a comment (AI) v2: fix a refcount leak introduced in v1 (AI)
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Add validation for MTU changes Increasing the MTU beyond the HDS threshold causes the hardware to fragment packets across multiple buffers. If a single-buffer XDP program is attached, the driver will drop all multi-frag frames. While we can't prevent a remote sender from sending non-TCP packets larger than the MTU, this will prevent users from inadvertently breaking new TCP streams. Traditionally, drivers supported XDP with MTU less than 4Kb (packet per page). Fbnic currently prevents attaching XDP when MTU is too high. But it does not prevent increasing MTU after XDP is attached.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix IO hang with degraded array with llbitmap When llbitmap bit state is still unwritten, any new write should force rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying(). However, later the same check is missing in need_this_block(), causing stripe to deadloop during handling because handle_stripe() will decide to go to handle_stripe_fill(), meanwhile need_this_block() always return 0 and nothing is handled.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe() In au1200fb_drv_probe(), when platform_get_irq fails(), it directly returns from the function with an error code, which causes a memory leak. Replace it with a goto label to ensure proper cleanup.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/071d8fb757a8318f72c8e02898c2cf7e14e21fb6
- https://git.kernel.org/stable/c/3d4202ee6494c0d576cdc104b12e0834ca8136a8
- https://git.kernel.org/stable/c/3e5349e54113e2dce1a659c57935e18032742e56
- https://git.kernel.org/stable/c/762a26818934241b8b0172a229d2cf5d87260e40
- https://git.kernel.org/stable/c/81831d56b723bc1090ce3158feddaca88e85f939
- https://git.kernel.org/stable/c/b024a8efee0f55d330a1cdd3eac8f79ac5acd3be
- https://git.kernel.org/stable/c/bd1ad63e11b2a568e98de536f319054d2de29f56
- https://git.kernel.org/stable/c/ce4e25198a6aaaaf36248edf8daf3d744ec8e309
HIGH7.1
In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout When llbitmap_suspend_timeout() times out waiting for percpu_ref to become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref. The caller (md_llbitmap_daemon_fn) then continues to the next page without calling llbitmap_resume(), leaving the percpu_ref in a killed state permanently. Fix this by resurrecting the percpu_ref before returning the error, ensuring the page control structure remains usable for subsequent operations.
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/21ca24ba51a2c28bcc4df9d7e5a40b0eb66ab76d
- https://git.kernel.org/stable/c/2987642c5213508c6c9e718324c0d5289a92c474
- https://git.kernel.org/stable/c/65d1213baffa363f2eb1117b1dc7acc573b890f8
- https://git.kernel.org/stable/c/875fa28690e93ed5296c31d3344556c6bb867234
- https://git.kernel.org/stable/c/a540f767642f75240a6c35f6a65b69e44cfcea9d
- https://git.kernel.org/stable/c/b5fc86d753dd4c281a943b92f0eef02d31af03d7
- https://git.kernel.org/stable/c/d3968a0d85b211e197f2f4f06268a7031079e0d0
HIGH7.1
In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix rcu_read_unlock() deadloop due to softirq
Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in
__rcu_read_unlock()") removes the recursion-protection code from
__rcu_read_unlock(). Therefore, we could invoke the deadloop in
raise_softirq_irqoff() with ftrace enabled as follows:
WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180
Modules linked in: my_irq_work(O)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180
RSP: 0018:ffffc900000034a8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329
RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c
R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000
R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054
FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
__is_insn_slot_addr+0x54/0x70
kernel_text_address+0x48/0xc0
__kernel_text_address+0xd/0x40
unwind_get_return_address+0x1e/0x40
arch_stack_walk+0x9c/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
__raise_softirq_irqoff+0x61/0x80
__flush_smp_call_function_queue+0x115/0x420
__sysvec_call_function_single+0x17/0xb0
sysvec_call_function_single+0x8c/0xc0
Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
fixed the infinite loop in rcu_read_unlock_special() for IRQ work by
setting a flag before calling irq_work_queue_on(). We fix this issue by
setting the same flag before calling raise_softirq_irqoff() and rename the
flag to defer_qs_pending for more common.
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1f16679a5aa60238466ce339c35f5e82ece60337
- https://git.kernel.org/stable/c/4a4a6e12c9c829be3f74b7206fa8640fc4e1c566
- https://git.kernel.org/stable/c/979c708e6c9d7fc461daef2dad8b45f22e23464c
- https://git.kernel.org/stable/c/c2932e16d8c354404b17123e64daa8e33191e145
- https://git.kernel.org/stable/c/d41e37f26b3157b3f1d10223863519a943aa239b
HIGH7.1
In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it.
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:HСсылки
- https://git.kernel.org/stable/c/13537f7f6d28a87ee2e496e071b6ad9541905f23
- https://git.kernel.org/stable/c/235d702b771416b8a61e81bb09ba39282e4268fd
- https://git.kernel.org/stable/c/2e147aa3169b83eaf044776f81d86235bf147de1
- https://git.kernel.org/stable/c/4949e32387fe315b59ad5f422c9fc52836fbdd1e
- https://git.kernel.org/stable/c/4c4193829109f38b2855de77981adc2e066286c7
- https://git.kernel.org/stable/c/7efb6a4e6b1b523e744d17e6249757ed97caae7c
- https://git.kernel.org/stable/c/c2914c0ca7557c6c5c845621cb6d6c9f26ab5a8c
- https://git.kernel.org/stable/c/d4c98c077c7fb2dfdece7d605e694b5ea2665085
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree Annotating a local pointer variable, which will be assigned with the kmalloc-family functions, with the `__cleanup(kfree)` attribute will make the address of the local variable, rather than the address returned by kmalloc, passed to kfree directly and lead to a crash due to invalid deallocation of stack address. According to other places in the repo, the correct usage should be `__free(kfree)`. The code coincidentally compiled because the parameter type `void *` of kfree is compatible with the desired type `struct { ... } **`.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1ca428769cb4737a25bd32fb4d1573cc09eeaeef
- https://git.kernel.org/stable/c/2e6ff6a6fc69cc17ed10c9cb6242935d52acd52d
- https://git.kernel.org/stable/c/2e9185a42e0e237c74435fd092b7c34537c62156
- https://git.kernel.org/stable/c/507a1de58c21c95ad7c44afccaf1222d1c42246b
- https://git.kernel.org/stable/c/51838112d9c22502333c3085ca0c0d691e7093c6
- https://git.kernel.org/stable/c/7b57ada854b32310f224abd61bcfec2d5790ff0a
- https://git.kernel.org/stable/c/986455135b95f32c1f142068e451098fc751749e
- https://git.kernel.org/stable/c/d8a73cc46c8462a969a7516131feb3096f4c49d3
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/17d33ba7291100008360b5a354962db37ad80684
- https://git.kernel.org/stable/c/31cac6acf77ece488f29fb8f79589d9298e969c8
- https://git.kernel.org/stable/c/4b4dff498f46e9802f71bc84258bf73065f51c6a
- https://git.kernel.org/stable/c/da7e4b75e50c087d2031a92f6646eb90f7045a67
- https://git.kernel.org/stable/c/dbe8e81a2ec608f87f79a34f6444cd62f6a243bb
- https://git.kernel.org/stable/c/f75a5555e0049e7857eae25b60aee98b80e287ec
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done in gss_release_msg(), but forgot to add a corresponding kref_put() on the error path when kstrdup_const() fails. If service_name is non-NULL and kstrdup_const() fails, the function jumps to err_put_pipe_version which calls put_pipe_version() and kfree(gss_msg), but never releases the gss_auth reference. This leads to a kref leak where the gss_auth structure is never freed. Add a forward declaration for gss_free_callback() and call kref_put() in the err_put_pipe_version error path to properly release the reference taken earlier.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/3b2b6c42070ce4204936288253baf101e995c2d3
- https://git.kernel.org/stable/c/655c9ba9915f05266998dbbf4b76b3c79b8a70aa
- https://git.kernel.org/stable/c/a1bc9561b617ec7e2d09e6c134d1db8fcf9ca4a6
- https://git.kernel.org/stable/c/a2d4e9a76de0b2178001214ba5de5bf94a7354aa
- https://git.kernel.org/stable/c/b559be2ec6cdb2e9c2c36c23fbbd4690d8a5c3f7
- https://git.kernel.org/stable/c/c20f925214249bb4fc04f7e197bea142a6438af6
- https://git.kernel.org/stable/c/dd2fdc3504592d85e549c523b054898a036a6afe
- https://git.kernel.org/stable/c/e464e26b2457005c87e158570498274b9f3b90c7
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix invalid deref of rawdata when export_binary is unset
If the export_binary parameter is disabled on runtime, profiles that
were loaded before that will still have their rawdata stored in
apparmorfs, with a symbolic link to the rawdata on the policy
directory. When one of those profiles are replaced, the rawdata is set
to NULL, but when trying to resolve the symbolic links to rawdata for
that profile, it will try to dereference profile->rawdata->name when
profile->rawdata is now NULL causing an oops. Fix it by checking if
rawdata is set.
[ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088
[ 168.657420] #PF: supervisor read access in kernel mode
[ 168.660619] #PF: error_code(0x0000) - not-present page
[ 168.663613] PGD 0 P4D 0
[ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI
[ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary)
[ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330
[ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8
[ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282
[ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158
[ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80
[ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000
[ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80
[ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0
[ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000
[ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0
[ 168.701696] Call Trace:
[ 168.702325]
[ 168.702995] rawdata_get_link_data+0x1c/0x30
[ 168.704145] vfs_readlink+0xd4/0x160
[ 168.705152] do_readlinkat+0x114/0x180
[ 168.706214] __x64_sys_readlink+0x1e/0x30
[ 168.708653] x64_sys_call+0x1d77/0x26b0
[ 168.709525] do_syscall_64+0x81/0x500
[ 168.710348] ? do_statx+0x72/0xb0
[ 168.711109] ? putname+0x3e/0x80
[ 168.711845] ? __x64_sys_statx+0xb7/0x100
[ 168.712711] ? x64_sys_call+0x10fc/0x26b0
[ 168.713577] ? do_syscall_64+0xbf/0x500
[ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0
[ 168.715404] ? irqentry_exit+0xb2/0x740
[ 168.716359] ? exc_page_fault+0x90/0x1b0
[ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1432ab0774cba43e8111be39989ff226531a9bac
- https://git.kernel.org/stable/c/19f2e4055626a58842ddec3282ad4465a80c6625
- https://git.kernel.org/stable/c/1d2b2b58fde9059a488bc25399e6c3d74e9b5548
- https://git.kernel.org/stable/c/3c36b87fc2a4cf88eadea8cf13923bd2b4f9a3fa
- https://git.kernel.org/stable/c/6d8c180c825cbc73eeffaa79591f8e142dacae70
- https://git.kernel.org/stable/c/b25298e89a297c42eb4c4d6f081d60375b820abb
- https://git.kernel.org/stable/c/df9ac55abd18628bd8cff687ea043660532a3654
- https://git.kernel.org/stable/c/e6b2fc7e34d4e7ca6b8598c33a3d45d59e455d8d
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in __unix_needs_revalidation When receiving file descriptors via SCM_RIGHTS, both the socket pointer and the socket's sk pointer can be NULL during socket setup or teardown, causing NULL pointer dereferences in __unix_needs_revalidation(). This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new __unix_needs_revalidation() function was added without proper NULL checks. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0x0000000000000018 RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0) Call Trace: apparmor_file_receive+0x42/0x80 security_file_receive+0x2e/0x50 receive_fd+0x1d/0xf0 scm_detach_fds+0xad/0x1c0 The function dereferences sock->sk->sk_family without checking if either sock or sock->sk is NULL first. Add NULL checks for both sock and sock->sk before accessing sk_family.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: cpuidle: Skip governor when only one idle state is available On certain platforms (PowerNV systems without a power-mgt DT node), cpuidle may register only a single idle state. In cases where that single state is a polling state (state 0), the ladder governor may incorrectly treat state 1 as the first usable state and pass an out-of-bounds index. This can lead to a NULL enter callback being invoked, ultimately resulting in a system crash. [ 13.342636] cpuidle-powernv : Only Snooze is available [ 13.351854] Faulting instruction address: 0x00000000 [ 13.376489] NIP [0000000000000000] 0x0 [ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668 Fix this by adding a bail-out in cpuidle_select() that returns state 0 directly when state_count <= 1, bypassing the governor and keeping the tick running.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/4da2b897283c39980d6ae09dc1560fcd937879e5
- https://git.kernel.org/stable/c/5c577ac939bca486cb02069505cfe47a5312ce02
- https://git.kernel.org/stable/c/5d103a38e2ae96eca57fd17161bcd29bd4622d1c
- https://git.kernel.org/stable/c/63ae78336f40bcd9a44952a7c6bafb9c88a8effd
- https://git.kernel.org/stable/c/8f6833d919bae915ead6c599a53e81e19b32da52
- https://git.kernel.org/stable/c/a0724e40a58a0e323c59707edeae5b71d15800dc
- https://git.kernel.org/stable/c/a0f7e804edc82e513d1ccb7c95ed8b351522ec81
- https://git.kernel.org/stable/c/e5c9ffc6ae1bcdb1062527d611043681ac301aca
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Add missing check for input_ff_create_memless The ps_gamepad_create() function calls input_ff_create_memless() without verifying its return value, which can lead to incorrect behavior or potential crashes when FF effects are triggered. Add a check for the return value of input_ff_create_memless().
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/33acf9a4d6eb1f6d01691faca96ad6b2ab0fcfc0
- https://git.kernel.org/stable/c/35301ca2a83d17aac2f3e8e35c696f0da2a13111
- https://git.kernel.org/stable/c/45b01d85265bc1ccdd69e0a7887db4b905a778f4
- https://git.kernel.org/stable/c/496a345cc047a2c2d9d5a76956e1182525578bd5
- https://git.kernel.org/stable/c/987dee1486e975e2baa6a5d062cfdf18bbe901c8
- https://git.kernel.org/stable/c/d955aeb26e1210a018492b3b32cbdfaf017aaa25
- https://git.kernel.org/stable/c/e6807641ac94e832988655a1c0e60ccc806b76dc
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
The ALB RX path may access rx_hashtbl concurrently with bond
teardown. During rapid bond up/down cycles, rlb_deinitialize()
frees rx_hashtbl while RX handlers are still running, leading
to a null pointer dereference detected by KASAN.
However, the root cause is that rlb_arp_recv() can still be accessed
after setting recv_probe to NULL, which is actually a use-after-free
(UAF) issue. That is the reason for using the referenced commit in the
Fixes tag.
[ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI
[ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
[ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary)
[ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022
[ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding]
[ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6
04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00
[ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206
[ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e
[ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8
[ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8
[ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119
[ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810
[ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000
[ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0
[ 214.310347] Call Trace:
[ 214.313070]
[ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding]
[ 214.320975] bond_handle_frame+0x166/0xb60 [bonding]
[ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding]
[ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710
[ 214.339199] ? __pfx_arp_process+0x10/0x10
[ 214.343775] ? sched_balance_find_src_group+0x98/0x630
[ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10
[ 214.356513] ? arp_rcv+0x307/0x690
[ 214.360311] ? __pfx_arp_rcv+0x10/0x10
[ 214.364499] ? __lock_acquire+0x58c/0xbd0
[ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0
[ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 214.380743] ? lock_acquire+0x10b/0x140
[ 214.385026] process_backlog+0x3f1/0x13a0
[ 214.389502] ? process_backlog+0x3aa/0x13a0
[ 214.394174] __napi_poll.constprop.0+0x9f/0x370
[ 214.399233] net_rx_action+0x8c1/0xe60
[ 214.403423] ? __pfx_net_rx_action+0x10/0x10
[ 214.408193] ? lock_acquire.part.0+0xbd/0x260
[ 214.413058] ? sched_clock_cpu+0x6c/0x540
[ 214.417540] ? mark_held_locks+0x40/0x70
[ 214.421920] handle_softirqs+0x1fd/0x860
[ 214.426302] ? __pfx_handle_softirqs+0x10/0x10
[ 214.431264] ? __neigh_event_send+0x2d6/0xf50
[ 214.436131] do_softirq+0xb1/0xf0
[ 214.439830]
The issue is reproducible by repeatedly running
ip link set bond0 up/down while receiving ARP messages, where
rlb_arp_recv() can race with rlb_deinitialize() and dereference
a freed rx_hashtbl entry.
Fix this by setting recv_probe to NULL and then calling
synchronize_net() to wait for any concurrent RX processing to finish.
This ensures that no RX handler can access rx_hashtbl after it is freed
in bond_alb_deinitialize().
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/c65cdf46ce340c9c00fbbaf84599d2daff43626e
- https://git.kernel.org/stable/c/d31065526f160ee0244a719230aa069daca2bf4d
- https://git.kernel.org/stable/c/db5435b5342e3aaa4521d0f3ccfe94316b253ca1
- https://git.kernel.org/stable/c/de7c097800f07f3c108185c7a38b53a530ba30ff
- https://git.kernel.org/stable/c/e6834a4c474697df23ab9948fd3577b26bf48656
- https://git.kernel.org/stable/c/f94a0de7b9f32745a14a1621c63087a092823587
- https://git.kernel.org/stable/c/fd54ddc929be1d6c3b3b7b35d6d4642a5d9e803c
- https://git.kernel.org/stable/c/fef13c403be3fb685cb06419e6b3623106aab5ba
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc).
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HCRITICAL9.8
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF and double free in smb2_open_file() Zero out @err_iov and @err_buftype before retrying SMB2_open() to prevent an UAF bug if @data != NULL, otherwise a double free.
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/4d339b219004869e96c4ce56b8891f83a38da4c0
- https://git.kernel.org/stable/c/639deb962986ef2f5e2a6d5a600c66f922471e81
- https://git.kernel.org/stable/c/7425453ea16dbc3bbb0f6cac4d60b537e5e4d151
- https://git.kernel.org/stable/c/96e53bb3ee2f354cf6b4ab07bcc56e500f8b3f74
- https://git.kernel.org/stable/c/e66dcf7bb9c4df5582c82bc3582725abcbfbea73
- https://git.kernel.org/stable/c/ebbbc4bfad4cb355d17c671223d0814ee3ef4eda
- https://access.redhat.com/security/cve/CVE-2026-45972
- https://bugzilla.redhat.com/show_bug.cgi?id=2481973
- https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-45972.json
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found If btrfs_search_slot_for_read() returns 1, it means we did not find any key greater than or equals to the key we asked for, meaning we have reached the end of the tree and therefore the path is not valid. If this happens we need to break out of the loop and stop, instead of continuing and accessing an invalid path.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/023545e272f369d487e6a986c1e321c6e04be1da
- https://git.kernel.org/stable/c/0761447f6f51e1c7997960d8e6559337deed6729
- https://git.kernel.org/stable/c/1ee1d006c9fe4d6be5527ab1c84216b80cccbe40
- https://git.kernel.org/stable/c/b2bd557b75b760e4b9d209112bda19314bd64558
- https://git.kernel.org/stable/c/b5b8ade9da452086e78f5d519b90d3769e354853
- https://git.kernel.org/stable/c/d7cf2314dd5e8661c05d076cd627eea9a7f76616
- https://git.kernel.org/stable/c/ecb7c2484cfc83a93658907580035a8adf1e0a92
- https://git.kernel.org/stable/c/fd4913a53e3b54ad7e161847291439fe445d6356
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_ras_init() When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function returns directly without freeing the allocated con structure, leading to a memory leak. Fix this by jumping to the release_con label to properly clean up the allocated memory before returning the error code. Compile tested only. Issue found using a prototype static analysis tool and code review.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/2fef8c2ac67e7c1b0409d23653300b134c63e54c
- https://git.kernel.org/stable/c/3f43e7812b30d6b2e850218f9bb1dae60727fcef
- https://git.kernel.org/stable/c/c11cd77a18115d2cd3f4b6915c4a537b6042f950
- https://git.kernel.org/stable/c/ee41e5b63c8210525c936ee637a2c8d185ce873c
- https://git.kernel.org/stable/c/f8a5426652bdadd4a5cb48326d48abbdfebe8153
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: fbnic: close fw_log race between users and teardown Fixes a theoretical race on fw_log between the teardown path and fw_log write functions. fw_log is written inside fbnic_fw_log_write() and can be reached from the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before IRQ/MBX teardown during cleanup, resulting in a potential data race of dereferencing a freed/null variable. Possible Interleaving Scenario: CPU0: fbnic_fw_msix_intr() // Entry fbnic_fw_log_write() if (fbnic_fw_log_ready()) // true ... preempt ... CPU1: fbnic_remove() // Entry fbnic_fw_log_free() vfree(log->data_start); log->data_start = NULL; CPU0: continues, walks log->entries or writes to log->data_start The initialization also has an incorrect order problem, as the fw_log is currently allocated after MBX setup during initialization. Fix the problems by adjusting the synchronization order to put initialization in place before the mailbox is enabled, and not cleared until after the mailbox has been disabled.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: staging: greybus: lights: avoid NULL deref gb_lights_light_config() stores channel_count before allocating the channels array. If kcalloc() fails, gb_lights_release() iterates the non-zero count and dereferences light->channels, which is NULL. Allocate channels first and only then publish channels_count so the cleanup path can't walk a NULL pointer.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/01b91cb3e748032fd96bbe0043812b426a52f091
- https://git.kernel.org/stable/c/06162d85f830582da6e9e5fcf9c9504d6da9ae0b
- https://git.kernel.org/stable/c/3cbe694d235d96f628ec7dc6ae4d8bdddb768699
- https://git.kernel.org/stable/c/65f2c608096d766540953d9b170d216aa3b5eb95
- https://git.kernel.org/stable/c/a118724d7641b832fa14323e2733e28ae4834552
- https://git.kernel.org/stable/c/ba5022162da63059bae36c4fd84d7031f582c71f
- https://git.kernel.org/stable/c/da46264a7016034a5bbbad034c012ef218b7d0af
- https://git.kernel.org/stable/c/efcffd9a6ad8d190651498d5eda53bfc7cf683a7
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Stop job scheduling across aie2_release_resource() Running jobs on a hardware context while it is in the process of releasing resources can lead to use-after-free and crashes. Fix this by stopping job scheduling before calling aie2_release_resource() and restarting it after the release completes. Additionally, aie2_sched_job_run() now checks whether the hardware context is still active.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: s390/cio: Fix device lifecycle handling in css_alloc_subchannel() `css_alloc_subchannel()` calls `device_initialize()` before setting up the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails, the error path frees the subchannel structure directly, bypassing the device model reference counting. Once `device_initialize()` has been called, the embedded struct device must be released via `put_device()`, allowing the release callback to free the container structure. Fix the error path by dropping the initial device reference with `put_device()` instead of calling `kfree()` directly. This ensures correct device lifetime handling and avoids potential use-after-free or double-free issues.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/6715560527e343a387e4a0d2e6c401748e89fa55
- https://git.kernel.org/stable/c/abb6e07f46a740cda4f07d1b561ae4eaa7a1df42
- https://git.kernel.org/stable/c/c35cfbb5341ba05ad1b4476ffc3c21cc3ff8f603
- https://git.kernel.org/stable/c/f65c75b0b9b5a390bc3beadcde0a6fbc3ad118f7
- https://git.kernel.org/stable/c/f96c5ccf95ae5f27218c1ce2d6a3ad2d3e105424
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch() Cover a missed execution path with a new check.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/56024dbe8c76cff22f53ba81a95d9efd4d0c9c44
- https://git.kernel.org/stable/c/7d99cbe717c1b15a66559215df32312d8cf7e525
- https://git.kernel.org/stable/c/b24595b86920911d2b04f862422b896a0620e9ad
- https://git.kernel.org/stable/c/cce354524da4d10fd2c7eb835e2e4e8ab8c0ce97
- https://git.kernel.org/stable/c/f2cf475d23b8486dfa414f7ac09f918ffd3c32a5
- https://git.kernel.org/stable/c/f851e03bce968ff9b3faad1b616062e1244fd38d
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: nfsd: never defer requests during idmap lookup During v4 request compound arg decoding, some ops (e.g. SETATTR) can trigger idmap lookup upcalls. When those upcall responses get delayed beyond the allowed time limit, cache_check() will mark the request for deferral and cause it to be dropped. This prevents nfs4svc_encode_compoundres from being executed, and thus the session slot flag NFSD4_SLOT_INUSE never gets cleared. Subsequent client requests will fail with NFSERR_JUKEBOX, given that the slot will be marked as in-use, making the SEQUENCE op fail. Fix this by making sure that the RQ_USEDEFERRAL flag is always clear during nfs4svc_decode_compoundargs(), since no v4 request should ever be deferred.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/063a6f22478ef929625000a2caf54667725c1dfd
- https://git.kernel.org/stable/c/243f71ed873ff3feeb6f9b5cb145d63f7188b4c4
- https://git.kernel.org/stable/c/3a72c7dedc99b321e0f267e4e999e5baf07c4593
- https://git.kernel.org/stable/c/8dff54fe88c0dcd4c55bff9fc2fa6ca968290826
- https://git.kernel.org/stable/c/99e17b20fddac19a228d213e00f6b9e1c10daff9
- https://git.kernel.org/stable/c/b9abb760db20504240a7147f27934d900cd80b23
- https://git.kernel.org/stable/c/d75ec4504a4340b033b15cad0303988b3089dd93
- https://git.kernel.org/stable/c/f9c206cdc4266caad6a9a7f46341420a10f03ccb
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/1403989d1b502f4a2c0d0b42ccf1c25748442eff
- https://git.kernel.org/stable/c/1cae1bafdf9caa9b462b19af06b1a06902e4e142
- https://git.kernel.org/stable/c/6d76febba07c40bcf358f63216d36ea68cf1c215
- https://git.kernel.org/stable/c/764c3c84b5683e608f43735c803a5f415046686c
- https://git.kernel.org/stable/c/815ddd27c0c7171a99fe802fdb19098ddef8b19d
- https://git.kernel.org/stable/c/87d4954b5c59735a99ea98cb208d47130f6dce7d
- https://git.kernel.org/stable/c/d87268326b277af3665237ac76a73dd9fa8e21b4
- https://git.kernel.org/stable/c/faddeb848305e79db89ee0479bb0e33380656321
- https://access.redhat.com/errata/RHSA-2026:27789
- https://access.redhat.com/errata/RHSA-2026:33743
- https://access.redhat.com/security/cve/CVE-2026-45984
- https://bugzilla.redhat.com/show_bug.cgi?id=2481922
- https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-45984.json
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `extcon` handle, means that the `extcon` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `extcon` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `extcon_set_state_sync()` with a freed `extcon` handle. Which usually crashes the system or otherwise silently corrupts the memory... Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `extcon` handle.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gfx3d: add parent to parent request map After commit d228ece36345 ("clk: divider: remove round_rate() in favor of determine_rate()") determining GFX3D clock rate crashes, because the passed parent map doesn't provide the expected best_parent_hw clock (with the roundd_rate path before the offending commit the best_parent_hw was ignored). Set the field in parent_req in addition to setting it in the req, fixing the crash. clk_hw_round_rate (drivers/clk/clk.c:1764) (P) clk_divider_bestdiv (drivers/clk/clk-divider.c:336) divider_determine_rate (drivers/clk/clk-divider.c:358) clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) __clk_determine_rate (drivers/clk/clk.c:1741) clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) clk_core_round_rate_nolock (drivers/clk/clk.c:1710) clk_round_rate (drivers/clk/clk.c:1804) dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1)) msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51) devfreq_set_target (drivers/devfreq/devfreq.c:360) devfreq_update_target (drivers/devfreq/devfreq.c:426) devfreq_monitor (drivers/devfreq/devfreq.c:458) process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284) worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2)) kthread (kernel/kthread.c:467) ret_from_fork (arch/arm64/kernel/entry.S:861)
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/2583cb925ca1ce450aa5d74a05a67448db970193
- https://git.kernel.org/stable/c/547ae2f17349c7586953af5ef50de43ef3f65e9e
- https://git.kernel.org/stable/c/56360aa4ddd736fc19e6d0b0206c5e437e0d6ff8
- https://git.kernel.org/stable/c/82cfe5292b11deb1dc33822f67f73cfbe8eafe25
- https://git.kernel.org/stable/c/8aa972eba1f29068d13bec716d33abca30fb3f2a
- https://git.kernel.org/stable/c/aed53da569fb96eec09b4817b1953bcc2e467eea
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: clear stale link mapping of ahvif->links_map When an arvif is initialized in non-AP STA mode but MLO connection preparation fails before the arvif is created (arvif->is_created remains false), the error path attempts to delete all links. However, link deletion only executes when arvif->is_created is true. As a result, ahvif retains a stale entry of arvif that is initialized but not created. When a new arvif is initialized with the same link id, this stale mapping triggers the following WARN_ON. WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275 Call trace: ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P) drv_change_vif_links+0xbc/0x1a4 [mac80211] ieee80211_vif_update_links+0x54c/0x6a0 [mac80211] ieee80211_vif_set_links+0x40/0x70 [mac80211] ieee80211_prep_connection+0x84/0x450 [mac80211] ieee80211_mgd_auth+0x200/0x480 [mac80211] ieee80211_auth+0x14/0x20 [mac80211] cfg80211_mlme_auth+0x90/0xf0 [cfg80211] nl80211_authenticate+0x32c/0x380 [cfg80211] genl_family_rcv_msg_doit+0xc8/0x134 Fix this issue by unassigning the link vif and clearing ahvif->links_map if arvif is only initialized but not created. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix PF driver crash with kexec kernel booting During a kexec reboot the hardware is not power-cycled, so AF state from the old kernel can persist into the new kernel. When AF and PF drivers are built as modules, the PF driver may probe before AF reinitializes the hardware. The PF driver treats the RVUM block revision as an indication that AF initialization is complete. If this value is left uncleared at shutdown, PF may incorrectly assume AF is ready and access stale hardware state, leading to a crash. Clear the RVUM block revision during AF shutdown to avoid PF mis-detecting AF readiness after kexec.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/1370736836a18b5e0cd74bcc9cffe11d21f1fe79
- https://git.kernel.org/stable/c/2d2d574309e3ae84ee794869a5da8b4c38753a94
- https://git.kernel.org/stable/c/57821d1436ba1c6a6973aa32d54166fdec35558c
- https://git.kernel.org/stable/c/7d56ba306e93d04696718963fb4cda2883ee7585
- https://git.kernel.org/stable/c/8b5ed7c5417b7013d35b6f2507dab739013ba1a9
- https://git.kernel.org/stable/c/9769a09afda20a006b528b9e723effcae45965b2
- https://git.kernel.org/stable/c/9c3398e5b3a914b74276d44ab54c49123b89c61a
- https://git.kernel.org/stable/c/b7605b9301abc18fbbf2b0e23fdd281fc768955d
HIGH7.3
In the Linux kernel, the following vulnerability has been resolved:
MIPS: Work around LLVM bug when gp is used as global register variable
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [] init_idle+0x130/0x270
[ 0.000000] [] sched_init+0x5c8/0x6c0
[ 0.000000] [] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available.
CVSS 3.xВЫСОКАЯ 7.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:HСсылки
- https://git.kernel.org/stable/c/05bff9b0ae095b2420cfebb4a96759a09334bec6
- https://git.kernel.org/stable/c/1fe3b402b1e97a1718df3be0a1d3eee20133e735
- https://git.kernel.org/stable/c/30bfc2d6a1132a89a5f1c3b96c59cf3e4d076ea3
- https://git.kernel.org/stable/c/4dc65b40fb80c2020efbf139b9a38d30f9a37b92
- https://git.kernel.org/stable/c/561834f6d6f52b8a1791331e94b2aac753491d2a
- https://git.kernel.org/stable/c/9bc3b0ae5203aba650297fdf3e1e774125e423f2
- https://git.kernel.org/stable/c/c0155dee51b9f5f48aaf5c71cae005eb0e36521f
- https://git.kernel.org/stable/c/e3a6498a63394218561065a9a7a597a204f52f6a
HIGH8.4
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix block_group_tree dirty_list corruption
When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the
block group tree to the switch_commits list before calling
switch_commit_roots, as we do for the tree root and the chunk root.
However, the block group tree uses normal root dirty tracking and in any
transaction that does an allocation and dirties a block group, the block
group root will already be linked to a list by the dirty_list field and
this use of list_add_tail() is invalid and corrupts the prev/next
members of block_group_root->dirty_list.
This is apparent on a subsequent list_del on the prev if we enable
CONFIG_DEBUG_LIST:
[32.1571] ------------[ cut here ]------------
[32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538)
[32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607
[32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none)
[32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014
[32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120
[32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202
[32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538
[32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00
[32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff
[32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538
[32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538
[32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000
[32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0
[32.1609] Call Trace:
[32.1610]
[32.1611] switch_commit_roots+0x82/0x1d0 [btrfs]
[32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs]
[32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[32.1621] __iterate_supers+0xe8/0x190
[32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10
[32.1623] ksys_sync+0x63/0xb0
[32.1624] __do_sys_sync+0xe/0x20
[32.1625] do_syscall_64+0x73/0x450
[32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[32.1627] RIP: 0033:0x7f0c28d05d2b
[32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2
[32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b
[32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d
[32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000
[32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80
[32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034
[32.1643]
[32.1644] irq event stamp: 0
[32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[32.1646] hardirqs last disabled at (0): []copy_process+0xb37/0x2260
[32.1648] softirqs last enabled at (0): []copy_process+0xb37/0x2260
[32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0
[32.1652] ---[ end trace 0000000000000000 ]---
Furthermore, this list corruption eventually (when we happen to add a
new block group) results in getting the switch_commits and
dirty_cowonly_roots lists mixed up and attempting to call update_root
on the tree root which can't be found in the tree root, resulting in a
transaction abort:
[87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1
[87.8272] ------------[ cut here ]------------
[87.8274] BTRFS: Transaction aborted (error -117)
[87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703
[87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none)
[87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 0
---truncated---
CVSS 3.xВЫСОКАЯ 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/201091da34c4f113af6b4a7407091c39bf29d4ca
- https://git.kernel.org/stable/c/3a1f4264daed4b419c325a7fe35e756cada3cf82
- https://git.kernel.org/stable/c/4eb830847d84276f1c8ea46541cfeeedaba1fb63
- https://git.kernel.org/stable/c/6e10283b5519d987d880d71bec90cdc7f2ec62b3
- https://git.kernel.org/stable/c/80e1fda9c084dcf54819a12bc7682ec0afd2d8f4
- https://git.kernel.org/stable/c/e3d1fd084319f8f0830b22f014c7af6a96b4497b
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: pstore/ram: fix buffer overflow in persistent_ram_save_old() persistent_ram_save_old() can be called multiple times for the same persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz for PSTORE_TYPE_DMESG records). Currently, the function only allocates prz->old_log when it is NULL, but it unconditionally updates prz->old_log_size to the current buffer size and then performs memcpy_fromio() using this new size. If the buffer size has grown since the first allocation (which can happen across different kernel boot cycles), this leads to: 1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls 2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer using the incorrect (larger) old_log_size The KASAN splat would look similar to: BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x... Read of size N at addr ... by task ... The conditions are likely extremely hard to hit: 0. Crash with a ramoops write of less-than-record-max-size bytes. 1. Reboot: ramoops registers, pstore_get_records(0) reads old crash, allocates old_log with size X 2. Crash handler registered, timer started (if pstore_update_ms >= 0) 3. Oops happens (non-fatal, system continues) 4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X) 5. pstore_new_entry = 1, pstore_timer_kick() called 6. System continues running (not a panic oops) 7. Timer fires after pstore_update_ms milliseconds 8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1) 9. ramoops_get_next_prz() → persistent_ram_save_old() 10. buffer_size() returns Y, but old_log is X bytes 11. Y > X: memcpy_fromio() overflows heap Requirements: - a prior crash record exists that did not fill the record size (almost impossible since the crash handler writes as much as it can possibly fit into the record, capped by max record size and the kmsg buffer almost always exceeds the max record size) - pstore_update_ms >= 0 (disabled by default) - Non-fatal oops (system survives) Free and reallocate the buffer when the new size differs from the previously allocated size. This ensures old_log always has sufficient space for the data being copied.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/06d2c8bd108cea503f6f6e13e47495ed1085275f
- https://git.kernel.org/stable/c/2fa9a047c6a50ec80c3890dd623b85e237f0d1fd
- https://git.kernel.org/stable/c/4f73486ca822305c1cf5b8ebc0b53a6ab3801a81
- https://git.kernel.org/stable/c/5669645c052f235726a85f443769b6fc02f66762
- https://git.kernel.org/stable/c/58bda5a1d1ee98254383ef34f76b2c35140513ea
- https://git.kernel.org/stable/c/7cfe964e61c0ab667abd5f5b68e0acbf783efa4f
- https://git.kernel.org/stable/c/9a6fc69a570c0780834246d52c856cc3dbc2605f
- https://git.kernel.org/stable/c/cff0ef043e16feb5a02307c8f9d0117a96c5587c
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: AppArmor: Allow apparmor to handle unaligned dfa tables The dfa tables can originate from kernel or userspace and 8-byte alignment isn't always guaranteed and as such may trigger unaligned memory accesses on various architectures. Resulting in the following [ 73.901376] WARNING: CPU: 0 PID: 341 at security/apparmor/match.c:316 aa_dfa_unpack+0x6cc/0x720 [ 74.015867] Modules linked in: binfmt_misc evdev flash sg drm drm_panel_orientation_quirks backlight i2c_core configfs nfnetlink autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid sr_mod hid cdrom sd_mod ata_generic ohci_pci ehci_pci ehci_hcd ohci_hcd pata_ali libata sym53c8xx scsi_transport_spi tg3 scsi_mod usbcore libphy scsi_common mdio_bus usb_common [ 74.428977] CPU: 0 UID: 0 PID: 341 Comm: apparmor_parser Not tainted 6.18.0-rc6+ #9 NONE [ 74.536543] Call Trace: [ 74.568561] [<0000000000434c24>] dump_stack+0x8/0x18 [ 74.633757] [<0000000000476438>] __warn+0xd8/0x100 [ 74.696664] [<00000000004296d4>] warn_slowpath_fmt+0x34/0x74 [ 74.771006] [<00000000008db28c>] aa_dfa_unpack+0x6cc/0x720 [ 74.843062] [<00000000008e643c>] unpack_pdb+0xbc/0x7e0 [ 74.910545] [<00000000008e7740>] unpack_profile+0xbe0/0x1300 [ 74.984888] [<00000000008e82e0>] aa_unpack+0xe0/0x6a0 [ 75.051226] [<00000000008e3ec4>] aa_replace_profiles+0x64/0x1160 [ 75.130144] [<00000000008d4d90>] policy_update+0xf0/0x280 [ 75.201057] [<00000000008d4fc8>] profile_replace+0xa8/0x100 [ 75.274258] [<0000000000766bd0>] vfs_write+0x90/0x420 [ 75.340594] [<00000000007670cc>] ksys_write+0x4c/0xe0 [ 75.406932] [<0000000000767174>] sys_write+0x14/0x40 [ 75.472126] [<0000000000406174>] linux_sparc_syscall+0x34/0x44 [ 75.548802] ---[ end trace 0000000000000000 ]--- [ 75.609503] dfa blob stream 0xfff0000008926b96 not aligned. [ 75.682695] Kernel unaligned access at TPC[8db2a8] aa_dfa_unpack+0x6e8/0x720 Work around it by using the get_unaligned_xx() helpers.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: don't explicitly disable clocks in .remove() The clocks in fsl_edma_engine::muxclk are allocated and enabled with devm_clk_get_enabled(), which automatically cleans these resources up, but these clocks are also manually disabled in fsl_edma_remove(). This causes warnings on driver removal for each clock: edma_module already disabled WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8 [...] Call trace: clk_core_disable+0x198/0x1c8 (P) clk_disable+0x34/0x58 fsl_edma_remove+0x74/0xe8 [fsl_edma] [...] ---[ end trace 0000000000000000 ]--- edma_module already unprepared WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220 [...] Call trace: clk_core_unprepare+0x1f8/0x220 (P) clk_unprepare+0x34/0x58 fsl_edma_remove+0x7c/0xe8 [fsl_edma] [...] ---[ end trace 0000000000000000 ]--- Fix these warnings by removing the unnecessary fsl_disable_clocks() call in fsl_edma_remove().
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/533d495f15e4c88ad5246c7f90ae026702e28d75
- https://git.kernel.org/stable/c/666c53e94c1d0bf0bdf14c49505ece9ddbe725bc
- https://git.kernel.org/stable/c/68feac21bd4de7ae4faba05704c404861d991fcf
- https://git.kernel.org/stable/c/b84dba68c4823da452cec99a5d213571a65d06de
- https://git.kernel.org/stable/c/bda244871179543dd3be7d093236cb33b2fb1765
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages LOCALIO is an NFS loopback mount optimization that avoids using the network for READ, WRITE and COMMIT if the NFS client and server are determined to be on the same system. But because LOCALIO is still fundamentally "just NFS loopback mount" it is susceptible to recursion deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then back into NFS via nfs_writepages. Fix LOCALIO's potential for direct reclaim deadlock by ensuring that all its page cache allocations are done from GFP_NOFS context. Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs: prevent stack overflows from page cache allocation").
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH7.8
In the Linux kernel, the following vulnerability has been resolved: procfs: fix missing RCU protection when reading real_parent in do_task_stat() When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent without proper RCU protection, which leads to: cpu 0 cpu 1 ----- ----- do_task_stat var = task->real_parent release_task call_rcu(delayed_put_task_struct) task_tgid_nr_ns(var) rcu_read_lock <--- Too late to protect task->real_parent! task_pid_ptr <--- UAF! rcu_read_unlock This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add proper RCU protection for accessing task->real_parent.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/0e64bd46a04a4fd61279aca9f53a664e9e5f7e7e
- https://git.kernel.org/stable/c/1c8dc5b5517546c68ffae40b948336122bb61306
- https://git.kernel.org/stable/c/4f9ae386861e280b7631ca252f798d25575627ee
- https://git.kernel.org/stable/c/73ec7c96601d61d52310c659145bb06d933a0fa6
- https://git.kernel.org/stable/c/76149d53502cf17ef3ae454ff384551236fba867
- https://git.kernel.org/stable/c/c93a33f28f915d446eea6fb3f0e1def0b3af1982
- https://git.kernel.org/stable/c/dd8b13cb4ff1a4545a214ed897fdf2bc341155b6
- https://git.kernel.org/stable/c/fefa0fcd78be465b7ad4c497fa6ec90d64194c04
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix out-of-bound access in fib6_add_rt2node().
syzbot reported out-of-bound read in fib6_add_rt2node(). [0]
When IPv6 route is created with RTA_NH_ID, struct fib6_info
does not have the trailing struct fib6_nh.
The cited commit started to check !iter->fib6_nh->fib_nh_gw_family
to ensure that rt6_qualify_for_ecmp() will return false for iter.
If iter->nh is not NULL, rt6_qualify_for_ecmp() returns false anyway.
Let's check iter->nh before reading iter->fib6_nh and avoid OOB read.
[0]:
BUG: KASAN: slab-out-of-bounds in fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
Read of size 1 at addr ffff8880384ba6de by task syz.0.18/5500
CPU: 0 UID: 0 PID: 5500 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
fib6_add_rt2node_nh net/ipv6/ip6_fib.c:1363 [inline]
fib6_add+0x910/0x18c0 net/ipv6/ip6_fib.c:1531
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3957
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f9316b9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd8809b678 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9316e15fa0 RCX: 00007f9316b9aeb9
RDX: 0000000000000000 RSI: 0000200000004380 RDI: 0000000000000003
RBP: 00007f9316c08c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f9316e15fac R14: 00007f9316e15fa0 R15: 00007f9316e15fa0
Allocated by task 5499:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5657 [inline]
__kmalloc_noprof+0x40c/0x7e0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
fib6_info_alloc+0x30/0xf0 net/ipv6/ip6_fib.c:155
ip6_route_info_create+0x142/0x860 net/ipv6/route.c:3820
ip6_route_add+0x49/0x1b0 net/ipv6/route.c:3949
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_s
---truncated---
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/03b5051e02f5a3772eee57493ad697d4b505b0c2
- https://git.kernel.org/stable/c/500e54615c97bc3c427e52305a6fcd38a0e008a3
- https://git.kernel.org/stable/c/8244f959e2c125c849e569f5b23ed49804cce695
- https://git.kernel.org/stable/c/bcc60ad129ae1837cf809c81bff56ec8bfdb6b11
- https://git.kernel.org/stable/c/bf5009a06e03ee9a51052bb59f2228a5e4e66260
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: spi: wpcm-fiu: Fix potential NULL pointer dereference in wpcm_fiu_probe() platform_get_resource_byname() can return NULL, which would cause a crash when passed the pointer to resource_size(). Move the fiu->memory_size assignment after the error check for devm_ioremap_resource() to prevent the potential NULL pointer dereference.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/0f93a80eb3fd596ddc5730d05e0e8c88e1aa2891
- https://git.kernel.org/stable/c/2c538a0b3472e99c892c26f4940da38b7d87f632
- https://git.kernel.org/stable/c/888a0a802c467bbe34a42167bdf9d7331333440a
- https://git.kernel.org/stable/c/9e5cb7e67fbdb8320d68d87db882a92b36f6a1d9
- https://git.kernel.org/stable/c/cb9b2dc34a9eef0855edb00ae9c9b7f72394281b
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put() This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()"). The original patch attempted to acquire the card->controls_rwsem lock in fsl_xcvr_mode_put(). However, this function is called from the upper ALSA core function snd_ctl_elem_write(), which already holds the write lock on controls_rwsem for the whole put operation. So there is no need to simply hold the lock for fsl_xcvr_activate_ctl() again. Acquiring the read lock while holding the write lock in the same thread results in a deadlock and a hung task, as reported by Alexander Stein.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/0886dc6326c3cc596799c4340d342898301cf52a
- https://git.kernel.org/stable/c/29b2fbe3498da3681a01b34e4a2259f8a1b89448
- https://git.kernel.org/stable/c/30ffcad5edb56947dccc26f6816ab7a55b21a711
- https://git.kernel.org/stable/c/9a2a5da002775376498e8814df4a87cd629a3a0c
- https://git.kernel.org/stable/c/9f16d96e1222391a6b996a1b676bec14fb91e3b2
- https://git.kernel.org/stable/c/ae5a70e3e87c28edbaf9939cfef1bcbd9615420f
- https://git.kernel.org/stable/c/b0f74f5d24fe3c73ef1369a811891198b54c1e8e
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds stream encoder index v3 eng_id can be negative and that stream_enc_regs[] can be indexed out of bounds. eng_id is used directly as an index into stream_enc_regs[], which has only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can access memory past the end of the array. Add a bounds check using ARRAY_SIZE() before using eng_id as an index. The unsigned cast also rejects negative values. This avoids out-of-bounds access. Fixes the below smatch error: dcn*_resource.c: stream_encoder_create() may index stream_enc_regs[eng_id] out of bounds (size 5). drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c 1246 static struct stream_encoder *dcn35_stream_encoder_create( 1247 enum engine_id eng_id, 1248 struct dc_context *ctx) 1249 { ... 1255 1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */ 1257 if (eng_id <= ENGINE_ID_DIGF) { ENGINE_ID_DIGF is 5. should <= be dc_bios, 1283 eng_id, vpg, afmt, --> 1284 &stream_enc_regs[eng_id], ^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array. ... 1287 return &enc1->base; 1288 } v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast v3: The compiler already knows how to compare the two values, so the cast (int) is not needed. (Roman)
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HHIGH7.5
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix WQ_MEM_RECLAIM warning When sunrpc is used, if a reset triggered, our wq may lead the following trace: workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma] is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle [hns_roce_hw_v2] WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144 Call trace: check_flush_dependency+0xe0/0x144 start_flush_work.constprop.0+0x1d0/0x2f0 __flush_work.isra.0+0x40/0xb0 flush_work+0x14/0x30 hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2] ib_destroy_qp_user+0x9c/0x2b4 rdma_destroy_qp+0x34/0xb0 rpcrdma_ep_destroy+0x28/0xcc [rpcrdma] rpcrdma_ep_put+0x74/0xb4 [rpcrdma] rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma] xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18 Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:HСсылки
- https://git.kernel.org/stable/c/0cbec8b49270f3f0600b8e3ef5e8f0d233dcea27
- https://git.kernel.org/stable/c/12761bd0ae16a80f237c2a65ab1b1064076cc74a
- https://git.kernel.org/stable/c/562c96b1393da2df3ea62173c84117b39da353b9
- https://git.kernel.org/stable/c/70a5eb757ace5bd627a36f04d871eaf85def424d
- https://git.kernel.org/stable/c/c0a26bbd3f99b7b03f072e3409aff4e6ec8af6f6
- https://git.kernel.org/stable/c/c5ef9a1bcf5b597695d9c2e6ac452e9f89521862
CRITICAL9.1
In the Linux kernel, the following vulnerability has been resolved: inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP Yizhou Zhao reported that simply having one RAW socket on protocol IPPROTO_RAW (255) was dangerous. socket(AF_INET, SOCK_RAW, 255); A malicious incoming ICMP packet can set the protocol field to 255 and match this socket, leading to FNHE cache changes. inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST") pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner "man 7 raw" states: A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able to send any IP protocol that is specified in the passed header. Receiving of all IP protocols via IPPROTO_RAW is not possible using raw sockets. Make sure we drop these malicious packets.
CVSS 3.xКРИТИЧЕСКАЯ 9.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:HСсылки
- https://git.kernel.org/stable/c/19e42490c89bac9a388f28179e66bebbef350f99
- https://git.kernel.org/stable/c/531c1aec81bfe19d00af13da5531fbb8209e4bd2
- https://git.kernel.org/stable/c/719d3932b8f6e3348ce2f0ac58e278301fc17575
- https://git.kernel.org/stable/c/c89477ad79446867394360b29bb801010fc3ff22
- https://git.kernel.org/stable/c/db76b75ede3810e7cf9cfea5067d4f3e0993768b
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: nfc: hci: shdlc: Stop timers and work before freeing context llc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlc structure while its timers and state machine work may still be active. Timer callbacks can schedule sm_work, and sm_work accesses SHDLC state and the skb queues. If teardown happens in parallel with a queued/running work item, it can lead to UAF and other shutdown races. Stop all SHDLC timers and cancel sm_work synchronously before purging the queues and freeing the context. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/1cb97b1225450af3f7b728777929ba50c6a58ced
- https://git.kernel.org/stable/c/276820278e9717cc7d4bb32381892dd3ddf418d4
- https://git.kernel.org/stable/c/77eef9f2eef045c3c37a3df82d3e661afb866b98
- https://git.kernel.org/stable/c/a24a676329d40481b2331bfa1418a679577dfd3a
- https://git.kernel.org/stable/c/c60f41022eaad2a1dafecd3ae6f249a3bd6d4b6e
- https://git.kernel.org/stable/c/c9efde1e537baed7648a94022b43836a348a074f
- https://git.kernel.org/stable/c/cf70cedce327833296ebe6043364d1e44b76a2ab
MEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: PCI/P2PDMA: Fix p2pmem_alloc_mmap() warning condition Commit b7e282378773 has already changed the initial page refcount of p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses "VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page refcount should not be zero and the following will be reported when CONFIG_DEBUG_VM is enabled: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000 flags: 0x20000000002000(reserved|node=0|zone=4) raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page)) ------------[ cut here ]------------ WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60 Fix by using "page_ref_count(page)" as the assertion condition.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HMEDIUM5.5
In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree When probing the k230 pinctrl driver, the kernel triggers a NULL pointer dereference. The crash trace showed: [ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068 [ 0.740737] ... [ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc In k230_pinctrl_parse_functions(), we attempt to retrieve the device pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized after k230_pinctrl_parse_dt() completes. At the time of DT parsing, info->pctl_dev is still NULL, leading to the invalid dereference of info->pctl_dev->dev. Use the already available device pointer from platform_device instead of accessing through uninitialized pctl_dev.
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HHIGH8.4
In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVSS 3.xВЫСОКАЯ 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:HСсылки
- https://git.kernel.org/stable/c/2178dc65d45e2f7bcaa8af8d80d100419bdab251
- https://git.kernel.org/stable/c/62d753b916bd500bb269b7078cdab73198ab4718
- https://git.kernel.org/stable/c/64e15155095f39f4dec9b4659da1238ef8fc54d4
- https://git.kernel.org/stable/c/721449a15170fc5f028a7576d7f65b9f60d53482
- https://git.kernel.org/stable/c/a39f8f06216f73ef40e71e2fe4ad071964c1fd36
- https://git.kernel.org/stable/c/af261f218a7606f93d2c786353d60bb4feb56ef0
- https://git.kernel.org/stable/c/d4e2e3c3caa26b93aa9f36d0a6824b584e2a8dfc
- https://git.kernel.org/stable/c/e2febe375e5ea5afed92f4cd9711bde8f24ee6d2
HIGH7.8
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: do WoW offloads only on primary link In case of multi-link connection, WCN7850 firmware crashes due to WoW offloads enabled on both primary and secondary links. Change to do it only on primary link to fix it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HMEDIUM4.7
In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etr: Fix race condition between sysfs and perf mode When trying to run perf and sysfs mode simultaneously, the WARN_ON() in tmc_etr_enable_hw() is triggered sometimes: WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] [..snip..] Call trace: tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] coresight_enable_path+0x1c8/0x218 [coresight] coresight_enable_sysfs+0xa4/0x228 [coresight] enable_source_store+0x58/0xa8 [coresight] dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x120/0x1b8 vfs_write+0x2c8/0x388 ksys_write+0x74/0x108 __arm64_sys_write+0x24/0x38 el0_svc_common.constprop.0+0x64/0x148 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Since the enablement of sysfs mode is separeted into two critical regions, one for sysfs buffer allocation and another for hardware enablement, it's possible to race with the perf mode. Fix this by double check whether the perf mode's been used before enabling the hardware in sysfs mode. mode: [sysfs mode] [perf mode] tmc_etr_get_sysfs_buffer() spin_lock(&drvdata->spinlock) [sysfs buffer allocation] spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() drvdata->etr_buf = etr_perf->etr_buf spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at the perf side spin_unlock(&drvdata->spinlock) With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf. This ensures we verify whether the perf mode's already running before we actually allocate the buffer. Then we can save the time of allocating/freeing the sysfs buffer if race with the perf mode.
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H