Все бюллетени/sisyphus/ALT-PU-2026-10105-22
ALT-PU-2026-10105-22

Обновление пакета kernel-image-6.12 в ветке sisyphus

Версия6.12.93-alt1
Задание#420592
Опубликовано2026-11-04
Макс. серьёзностьCRITICAL
Серьёзность:

Закрытые проблемы (179)

BDU:2026-08088
HIGH7.0

Уязвимость функции vgic_its_invalidate_cache() модуля arch/arm64/kvm/vgic/vgic-its.c операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-06-10Изменено: 2026-09-20
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-09233
HIGH7.1

Уязвимость функции setup_vmgexit_scratch() подсистемы KVM ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-07-05Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
CVSS 2.0СРЕДНЯЯ 6.2
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:N/A:C
Ссылки
BDU:2026-09715
HIGH7.8

Уязвимость компонента net/core/skbuff.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-07-14Изменено: 2026-10-07
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-13716
HIGH7.8

Уязвимость функции ipc_idr_alloc() ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии

Опубликовано: 2026-09-01Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-13891
HIGH7.1

Уязвимость функции tun_xdp_one() модуля drivers/net/tun.c драйвера сетевых устройств ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-03Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.9
CVSS:2.0/AV:L/AC:L/Au:N/C:N/I:N/A:C
Ссылки
BDU:2026-13892
HIGH7.1

Уязвимость функции tun_xdp_one() модуля drivers/net/tun.c драйвера сетевых устройств ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-03Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.9
CVSS:2.0/AV:L/AC:L/Au:N/C:N/I:N/A:C
Ссылки
BDU:2026-13903
HIGH7.8

Уязвимость функции compat_mtw_from_user() модуля net/bridge/netfilter/ebtables.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-03Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-13985
MEDIUM5.5

Уязвимость функции fw_classify() модуля net/sched/cls_fw.c подсистемы управления трафиком net/sched ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-03Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14269
CRITICAL9.8

Уязвимость функции batadv_tt_prepare_tvlv_local_data() модуля net/batman-adv/translation-table.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0КРИТИЧЕСКАЯ 10.0
CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14271
CRITICAL9.8

Уязвимость функции is_supervision_frame() модуля net/hsr/hsr_forward.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0КРИТИЧЕСКАЯ 10.0
CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14272
MEDIUM5.5

Уязвимость функции dp_altmode_vdm() модуля drivers/usb/typec/altmodes/displayport.c драйвера спецификации USB TypeC ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14273
MEDIUM5.5

Уязвимость функции do_flash() модуля drivers/usb/typec/ucsi/ucsi_ccg.c драйвера интерфейса разъема USB Type C (UCSI) ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14274
MEDIUM5.5

Уязвимость функции module_flash_fw_schedule() модуля net/ethtool/module.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14281
MEDIUM5.5

Уязвимость функции usa49wg_indat_callback() модуля drivers/usb/serial/keyspan.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14282
MEDIUM5.5

Уязвимость функции bond_enslave() модуля drivers/net/bonding/bond_main.c драйвера сетевых устройств ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14292
MEDIUM5.5

Уязвимость функции cypress_read_int_callback() модуля drivers/usb/serial/cypress_m8.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14293
MEDIUM5.5

Уязвимость функции iio_buffer_enqueue_dmabuf() модуля drivers/iio/industrialio-buffer.c драйвера различных типов встроенных датчиков ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14295
MEDIUM5.5

Уязвимость функции xpadone_process_packet() модуля drivers/input/joystick/xpad.c драйвера устройств ввода ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14299
MEDIUM4.3

Уязвимость функции itg3200_read_all_channels() модуля drivers/iio/gyro/itg3200_buffer.c драйвера различных типов встроенных датчиков ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 4.3
CVSS:3.x/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N
CVSS 2.0СРЕДНЯЯ 4.0
CVSS:2.0/AV:N/AC:L/Au:S/C:P/I:N/A:N
Ссылки
BDU:2026-14305
MEDIUM5.3

Уязвимость функции nexio_read_data() модуля drivers/input/touchscreen/usbtouchscreen.c драйвера сенсорного экрана ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.3
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:L/AC:L/Au:S/C:P/I:P/A:P
Ссылки
BDU:2026-14312
LOW2.3

Уязвимость функции mt6358_read_imp() модуля drivers/iio/adc/mt6359-auxadc.c драйвера различных типов встроенных датчиков ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xНИЗКАЯ 2.3
CVSS:3.x/AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:N/A:N
CVSS 2.0НИЗКАЯ 1.4
CVSS:2.0/AV:L/AC:L/Au:M/C:P/I:N/A:N
Ссылки
BDU:2026-14314
LOW3.3

Уязвимость функции st_lsm6dsx_read_tagged_fifo() модуля drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xНИЗКАЯ 3.3
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N
CVSS 2.0НИЗКАЯ 1.7
CVSS:2.0/AV:L/AC:L/Au:S/C:P/I:N/A:N
Ссылки
BDU:2026-14317
MEDIUM4.0

Уязвимость функции linedisp_display() модуля drivers/auxdisplay/line-display.c ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 4.0
CVSS:3.x/AV:L/AC:L/PR:H/UI:R/S:U/C:L/I:L/A:L
CVSS 2.0СРЕДНЯЯ 4.0
CVSS:2.0/AV:L/AC:L/Au:M/C:P/I:P/A:P
Ссылки
BDU:2026-14320
HIGH8.8

Уязвимость функции batadv_tp_sender_cleanup() модуля net/batman-adv/tp_meter.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 8.3
CVSS:2.0/AV:A/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14321
HIGH8.8

Уязвимость функции vti6_siocdevprivate() модуля net/ipv6/ip6_vti.c реализации протокола IPv6 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14332
HIGH8.8

Уязвимость функции process_rx() модуля drivers/usb/typec/tcpm/tcpci_maxim_core.c драйвера диспетчера контроллеров портов USB TypeC ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14334
CRITICAL9.1

Уязвимость функции svdm_consume_modes() модуля drivers/usb/typec/tcpm/tcpm.c драйвера диспетчера контроллеров портов USB TypeC ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.1
CVSS:3.x/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 8.3
CVSS:2.0/AV:N/AC:L/Au:M/C:C/I:C/A:C
Ссылки
BDU:2026-14335
CRITICAL9.3

Уязвимость функции snp_begin_psc() модуля arch/x86/kvm/svm/sev.c подсистемы виртуализации на платформе x86 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.3
CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.2
CVSS:2.0/AV:L/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14336
CRITICAL10.0

Уязвимость функции batadv_tt_prepare_tvlv_global_data() модуля net/batman-adv/translation-table.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 10.0
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
CVSS 2.0КРИТИЧЕСКАЯ 10.0
CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14337
HIGH7.8

Уязвимость функции sctp_wait_for_connect() модуля net/sctp/socket.c реализации протокола SCTP (Stream Control Transmission Protocol) ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14347
HIGH7.8

Уязвимость функции ipv4_sysctl_exit_net() модуля net/ipv4/sysctl_net_ipv4.c реализации протокола IPv4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14348
HIGH7.8

Уязвимость функции l2tp_session_get_by_ifname() модуля net/l2tp/l2tp_core.c реализации протокола туннелирования второго уровня (L2TP) ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14351
HIGH8.1

Уязвимость функции macsec_post_decrypt() модуля drivers/net/macsec.c драйвера сетевых устройств ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на целостность защищаемой информации или вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.1
CVSS:3.x/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.8
CVSS:2.0/AV:A/AC:L/Au:N/C:N/I:C/A:C
Ссылки
BDU:2026-14354
HIGH8.1

Уязвимость функции format_dwdata() модуля drivers/thunderbolt/property.c драйвера общей поддержки USB4 и Thunderbolt ядра операционной системы Linux, позволяющая нарушителю получить доступ к защищаемой информации или вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.1
CVSS:3.x/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
CVSS 2.0ВЫСОКАЯ 7.8
CVSS:2.0/AV:A/AC:L/Au:N/C:C/I:N/A:C
Ссылки
BDU:2026-14355
HIGH8.2

Уязвимость функции nf_conntrack_tcp_packet() модуля net/netfilter/nf_conntrack_proto_tcp.c компонента netfilter ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на целостность защищаемой информации или вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.2
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H
CVSS 2.0ВЫСОКАЯ 8.5
CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:P/A:C
Ссылки
BDU:2026-14359
HIGH8.4

Уязвимость функции BPF_CALL_4() модуля net/core/filter.c поддержки сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.4
CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.2
CVSS:2.0/AV:L/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14373
HIGH8.4

Уязвимость функции omap2430_probe() модуля drivers/usb/musb/omap2430.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 8.4
CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.2
CVSS:2.0/AV:L/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14375
CRITICAL9.8

Уязвимость функции ip6_parse_tlv() модуля net/ipv6/exthdrs.c реализации протокола IPv6 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0КРИТИЧЕСКАЯ 10.0
CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14382
CRITICAL9.8

Уязвимость функции ip6_parse_tlv() модуля net/ipv6/exthdrs.c реализации протокола IPv6 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0КРИТИЧЕСКАЯ 10.0
CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14390
MEDIUM5.5

Уязвимость функции usbtmc_interrupt() модуля drivers/usb/class/usbtmc.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14391
MEDIUM5.5

Уязвимость функции belkin_sa_read_int_callback() модуля drivers/usb/serial/belkin_sa.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14392
MEDIUM5.5

Уязвимость функции mct_u232_read_int_callback() модуля drivers/usb/serial/mct_u232.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14397
MEDIUM6.5

Уязвимость функции sfb_dequeue() модуля net/sched/sch_sfb.c подсистемы управления трафиком net/sched ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xСРЕДНЯЯ 6.5
CVSS:3.x/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:N/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-14399
CRITICAL9.8

Уязвимость функции chap_server_compute_hash() модуля drivers/target/iscsi/iscsi_target_auth.c драйвера TCM ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0КРИТИЧЕСКАЯ 10.0
CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14400
CRITICAL9.8

Уязвимость функции iscsit_handle_text_cmd() модуля drivers/target/iscsi/iscsi_target.c драйвера TCM ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0КРИТИЧЕСКАЯ 10.0
CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C
Ссылки
BDU:2026-14403
HIGH7.8

Уязвимость функции tlb_flush() модуля arch/arm64/include/asm/tlb.h ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14409
HIGH7.8

Уязвимость функции copy_context_work_handler() модуля drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c драйвера инфраструктуры прямого рендеринга (DRI) видеокарт AMD ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14411
HIGH7.8

Уязвимость функции _dwc2_hcd_urb_dequeue() модуля drivers/usb/dwc2/hcd.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14412
HIGH7.8

Уязвимость функции iucv_sock_getsockopt() модуля net/iucv/af_iucv.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14414
HIGH7.7

Уязвимость функции adis16260_write_raw() модуля drivers/iio/gyro/adis16260.c драйвера различных типов встроенных датчиков ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.7
CVSS:3.x/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.5
CVSS:2.0/AV:L/AC:L/Au:M/C:C/I:C/A:C
Ссылки
BDU:2026-14417
HIGH7.5

Уязвимость функции batadv_bla_send_claim() модуля net/batman-adv/bridge_loop_avoidance.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0ВЫСОКАЯ 7.8
CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:N/A:C
Ссылки
BDU:2026-14427
HIGH7.0

Уязвимость функции mxuport_calc_num_ports() модуля drivers/usb/serial/mxuport.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14430
HIGH7.0

Уязвимость функции cypress_generic_port_probe() модуля drivers/usb/serial/cypress_m8.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14434
HIGH7.0

Уязвимость функции ucsi_handle_connector_change() модуля drivers/usb/typec/ucsi/ucsi.c драйвера интерфейса разъема USB Type C (UCSI) ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14436
HIGH7.0

Уязвимость функции digi_port_init() модуля drivers/usb/serial/digi_acceleport.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-14437
HIGH7.0

Уязвимость функции omninet_port_remove() модуля drivers/usb/serial/omninet.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-09-08Изменено: 2026-11-02
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-18116
MEDIUM5.5

Уязвимость ядра операционной системы Linux, связанная с доступом к неинициализированному указателю, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-11-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
CVE-2026-45930
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: mctp: ensure our nlmsg responses are initialised Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages.

Опубликовано: 2026-05-27Изменено: 2026-06-25
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-46316
CRITICAL9.3

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry vgic_its_invalidate_cache() walks the per-ITS translation cache with xa_for_each() and drops the cache's reference on each entry with vgic_put_irq(). It puts the iterated pointer, though, rather than the value returned by xa_erase(). The function is called from contexts that do not exclude one another: the ITS command handlers hold its_lock, the GITS_CTLR write path holds cmd_lock, and the path that clears EnableLPIs in a redistributor's GICR_CTLR holds neither. Two or more of them can drain the same cache concurrently, and if each one observes the same entry, erases it and then puts it, the single reference the cache holds on that entry is dropped more than once. The entry can then be freed while an ITE still maps it. xa_erase() is atomic and returns the previous entry, so put only the entry that this context actually removed. The cache reference is then dropped exactly once per entry even when the invalidations run concurrently, and the behavior is unchanged when only one context runs.

Опубликовано: 2026-06-09Изменено: 2026-10-19
CVSS 3.xКРИТИЧЕСКАЯ 9.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
Ссылки
CVE-2026-46321
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: tun: free page on short-frame rejection in tun_xdp_one() tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN without freeing the page that vhost_net_build_xdp() allocated for it. tun_sendmsg() discards that -EINVAL and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page; each short frame in a batch leaks one page-frag chunk. A local process that can open /dev/net/tun and /dev/vhost-net can hit this path: it attaches a tun/tap device as the vhost-net backend and feeds TX descriptors whose length minus the virtio-net header is below ETH_HLEN. Each kick leaks the page-frag chunks for that batch, and a tight submission loop exhausts host memory and triggers an OOM panic. Free the page before returning -EINVAL, matching the XDP-program error path in the same function.

Опубликовано: 2026-06-09Изменено: 2026-10-14
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H
Ссылки
CVE-2026-46322
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: tun: free page on build_skb failure in tun_xdp_one() When build_skb() fails in tun_xdp_one(), the function sets ret to -ENOMEM and jumps to the out label, which returns without freeing the page that vhost_net_build_xdp() allocated for the frame. As with the short-frame rejection path, tun_sendmsg() discards the per-buffer error and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page. Each build_skb() failure in a batch leaks one page-frag chunk. Free the page before taking the error path, matching the put_page() the other error exits of tun_xdp_one() already perform.

Опубликовано: 2026-06-09Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H
Ссылки
CVE-2026-52913
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: stop OGMv2 on disabled interface When a batadv_hard_iface is disabled, its mesh_iface pointer is set to NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via batadv_v_ogm_queue_on_if() for interfaces that have since lost their mesh_iface association. This results in a NULL pointer dereference when batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the now NULL hard_iface->mesh_iface to retrieve the batadv_priv. It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was called.

Опубликовано: 2026-06-24Изменено: 2026-07-08
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-52923
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted.

Опубликовано: 2026-06-24Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-52927
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: fix OOB read in compat_mtw_from_user Luxiao Xu says: The function compat_mtw_from_user() converts ebtables extensions from 32-bit user structures to kernel native structures. However, it lacks proper validation of the user-supplied match_size/target_size. When certain extensions are processed, the kernel-side translation logic may perform memory accesses based on the extension's expected size. If the user provides a size smaller than what the extension requires, it results in an out-of-bounds read as reported by KASAN. This fix introduces a check to ensure match_size is at least as large as the extension's required compatsize. This covers matches, watchers, and targets, while maintaining compatibility with standard targets. AFAIU this is relevant for matches that need to go though match->compat_from_user() call. Those that use plain memcpy with the user-provided size are ok because the caller checks that size vs the start of the next rule entry offset (which itself is checked vs. total size copied from userspace). The ->compat_from_user() callbacks assume they can read compatsize bytes, so they need this extra check. Based on an earlier patch from Luxiao Xu.

Опубликовано: 2026-06-24Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-52934
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tvlv: reject oversized TVLV packets batadv_tvlv_container_ogm_append() builds a TVLV packet section from the tvlv.container_list. The total size of this section is computed by batadv_tvlv_container_list_size(), which sums the sizes of all registered containers. The return type and accumulator in batadv_tvlv_container_list_size() were u16. If the accumulated size exceeds U16_MAX, the value wraps around, causing the subsequent allocation in batadv_tvlv_container_ogm_append() to be undersized. The memcpy-style copy that follows would then write beyond the end of the allocated buffer, corrupting kernel memory. Fix this by widening the return type of batadv_tvlv_container_list_size() to size_t. In batadv_tvlv_container_ogm_append(), check the computed length against U16_MAX before proceeding, and bail out as if the allocation had failed when the limit is exceeded.

Опубликовано: 2026-06-24Изменено: 2026-07-08
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-52943
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put().

Опубликовано: 2026-06-24Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-53080
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL dereference of "old" filters before change() Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") TC filters are added to a shared block and published to datapath before their ->change() function is called. This is a problem for cls_fw: an invalid filter created with the "old" method can still classify some packets before it is destroyed by the validation logic added by Xiang. Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0 can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 irq event stamp: 1045778 hardirqs last enabled at (1045784): [] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [] __dev_queue_xmit+0x78/0x14d0 Then, because of the value in the packet's mark, dereference on 'q->handle' with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...] Skip "old-style" classification on shared blocks, so that the NULL dereference is fixed and WARN_ON() is not hit anymore in the short lifetime of invalid cls_fw "old-style" filters. [1] https://sashiko.dev/#/patchset/2 ---truncated---

Опубликовано: 2026-06-24Изменено: 2026-10-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-53358
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen() l2cap_chan_close() removes the channel from conn->chan_l, which must be done under conn->lock. cleanup_listen() runs under the parent sk_lock, so acquiring conn->lock would invert the established conn->lock -> chan->lock -> sk_lock order. Instead of calling l2cap_chan_close() directly, schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. The timeout handler already acquires conn->lock and chan->lock in the correct order. The timer is only armed when chan->conn is still set: if it is already NULL, l2cap_conn_del() has already processed this channel (l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb), so there is nothing left to do. If l2cap_conn_del() races in after the timer is armed, __clear_chan_timer() inside l2cap_chan_del() cancels it; if the timer has already fired, the handler returns harmlessly because chan->conn was cleared.

Опубликовано: 2026-07-02Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-53360
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use As per the GHCB spec, when using GHCB v2+ require the software scratch area to reside in the GHCB's shared buffer. Note, things like Page State Change (PSC) requests _rely_ on this behavior, as the guest can't provide a length when making the request, i.e. the size of the guest payload is bounded by the size of the shared buffer. Failure to force usage of the GHCB, and a slew of other flaws, lets a malicious SNP guest corrupt host kernel heap memory, and leak host heap layout information. setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2), where exit_info_2 is guest-controlled. With exit_info_2=24, this yields a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only entries[0] and entries[1] are in-bounds. snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253) but NOT against the actual buffer size: idx_end = hdr->end_entry; if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer snp_complete_psc(svm, ...); return 1; } for (idx = idx_start; idx <= idx_end; idx++) { entry_start = entries[idx]; // OOB when idx >= 2 The guest sets end_entry=10+, causing the host to iterate entries[2+] which are OOB into adjacent slab objects. For each OOB entry: - The host reads 8 bytes (OOB READ / info leak oracle) - If the data passes PSC validation, __snp_complete_one_psc() writes cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806) - If validation fails, the error response reveals whether adjacent memory is zero vs non-zero (information disclosure to guest) The guest controls allocation size (exit_info_2), entry range (cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly hit different slab positions. By exploiting the variety of bugs, a malicious SEV-SNP guest can: - OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure) - OOB write cur_page bits into adjacent objects (heap corruption) - Trigger use-after-free conditions across VMGEXITs E.g. with KASAN enabled, a single insmod of the PoC guest module produces 73 KASAN reports: BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890 Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199 BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890 Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199 The buggy address belongs to the object at ffff888XXXXXXXXX which belongs to the cache kmalloc-cg-32 of size 32 The buggy address is located N bytes to the right of allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX) Breakdown: 62 slab-out-of-bounds (reads + writes past allocation) 7 slab-use-after-free 4 use-after-free All credit to Stan for the wonderful description and reproducer! [sean: write changelog]

Опубликовано: 2026-07-04Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
Ссылки
CVE-2026-63875
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Flush walk cache when unsharing PMD tables When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only |

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63876
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63877
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63881
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger get_queue_ids() computes array_size = num_queues * sizeof(uint32_t), which could overflow on 32-bit size_t build. using array_size() instead, it saturates to SIZE_MAX on overflow. (cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285)

Опубликовано: 2026-07-19Изменено: 2026-10-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63884
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated---

Опубликовано: 2026-07-19Изменено: 2026-10-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63886
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this.

Опубликовано: 2026-07-19Изменено: 2026-10-22
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63887
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.)

Опубликовано: 2026-07-19Изменено: 2026-10-22
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63888
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected.

Опубликовано: 2026-07-19Изменено: 2026-10-26
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63889
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32 An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in the generic FC transport. This is not a local userspace or IP network path; the attacker must be able to inject fabric traffic, for example as a compromised switch or fabric controller, or as a same-zone N_Port on a fabric that permits source spoofing. The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop counter against the 32-bit on-wire pname_count field, and did not bound pname_count by the descriptor body already validated by the TLV walker. A pname_count of 256 therefore wraps the counter and keeps the loop condition true indefinitely. Factor the shared pname_list[] walk into one helper, widen the counter to u32, and clamp pname_count against the entries that fit in the descriptor body before iterating.

Опубликовано: 2026-07-19Изменено: 2026-10-29
CVSS 3.xВЫСОКАЯ 8.1
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63893
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject u32 wrap in tb_property_entry_valid() entry->value is u32 and entry->length is u16; the sum is performed in u32 and wraps. A malicious XDomain peer can pick value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0 and passes the > block_len check. tb_property_parse() then passes entry->value to parse_dwdata() as a dword offset into the property block, reading attacker-directed memory far past the allocation. For TEXT-typed entries with the "deviceid" or "vendorid" keys this lands in xd->device_name / xd->vendor_name and is readable back via the per-XDomain device_name / vendor_name sysfs attributes; the leak is NUL-bounded (kstrdup() stops at the first zero byte) and untargeted (the attacker picks a delta, not an absolute address). DATA-typed entries are parsed into property->value.data but not generically surfaced to userspace. Use check_add_overflow() so a wrapped sum is rejected.

Опубликовано: 2026-07-19Изменено: 2026-10-26
CVSS 3.xВЫСОКАЯ 8.1
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63897
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix missing interrupt-in transfer sanity check Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space).

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63899
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63900
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan: fix missing indat transfer sanity check Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63901
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix memory corruption with small endpoints Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63902
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ]

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63903
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?)

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63904
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63905
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63906
HIGH8.4

In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Fix use-after-free in omap2430_probe() In omap2430_probe(), of_node_put(np) is called prematurely before the last access to np, leading to a use-after-free if the node's reference count drops to zero. Move the of_node_put() calls after the last use of np in both the success and error paths.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63908
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63909
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl().

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 8.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63912
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: restore combined single-frag length gate The ESP out-of-place fast path appends the trailer in esp_output_head() before esp_output_tail() allocates the destination page frag. The head-side gate currently checks skb->data_len and tailen separately, but the tail code allocates a single destination frag from the combined post-trailer skb->data_len. Reject the page-frag fast path when the combined aligned length exceeds a page. Otherwise skb_page_frag_refill() may fall back to a single page while the destination sg still spans the combined skb->data_len. Restore this combined-length page gate for both IPv4 and IPv6.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63913
HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ensure that a matching SYN was actually sent in the opposite direction. As a result, a crafted packet sequence consisting of a SYN followed by an invalid-sequence RST can prematurely terminate an active NAT entry. This makes connection teardown easier than intended. So, tighten the state transition logic to ensure that RST-triggered CLOSE transitions only occur when the RST is a valid response to a previously observed SYN in the correct direction.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 8.2
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H
Ссылки
CVE-2026-63914
HIGH7.3

In the Linux kernel, the following vulnerability has been resolved: xfrm: route MIGRATE notifications to caller's netns xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate() in net/key/af_key.c both hardcode &init_net for the multicast that announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE. XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the rest of the xfrm/af_key netlink path was made netns-aware in 2008. The other 14 multicast paths in xfrm_user.c route their event using xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path was missed. Two consequences of the init_net hardcoding: 1. The notification (selector, old/new endpoint addresses, and the km_address) is delivered to listeners on init_net's XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on the issuing netns. An IKE daemon running in init_net therefore receives migration notifications originating from any other netns on the host. 2. An IKE daemon running inside a non-init netns and subscribed to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the notification of its own migration. IKEv2 MOBIKE / address-update handling inside a netns is silently broken. Thread struct net through km_migrate() and the xfrm_mgr.migrate function pointer, drop the &init_net override in xfrm_send_migrate() and pfkey_send_migrate(), and pass the caller's net (already in scope in xfrm_migrate() via sock_net(skb->sk)) all the way down. struct xfrm_mgr is in-tree only and not exported as a stable API, so the function-pointer signature change is internal. pfkey_broadcast() is already netns-aware via net_generic(net, pfkey_net_id) since the pernet conversion. The five other pfkey_broadcast() callers in af_key.c already pass xs_net(x), sock_net(sk) or a per-netns net, so this only removes the &init_net outlier.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:L
Ссылки
CVE-2026-63915
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: nfc: hci: fix out-of-bounds read in HCP header parsing Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is written. Fix this by adding a pskb_may_pull() check at the entry of each function before packet->header is first accessed. The existing pskb_may_pull() checks before the reassembled hcp_skb is cast to struct hcp_packet remain in place to guard the 2-byte HCP message header.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63916
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63917
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
Ссылки
CVE-2026-63918
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname A reader in l2tp_session_get_by_ifname() can return a pointer to a session whose refcount has reached zero. The getter takes its reference with plain refcount_inc(), but every other session getter in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the corresponding _get_next variants) uses refcount_inc_not_zero() because the IDR/RCU lookup can race with refcount_dec_and_test() -> l2tp_session_free() -> kfree_rcu(). The ifname getter is the only outlier; the inconsistency was raised on-list after 979c017803c4 ("l2tp: use list_del_rcu in l2tp_session_unhash"). A reader inside rcu_read_lock_bh() that matches session->ifname can be preempted between the strcmp() and the refcount_inc(). If the last reference drops on another CPU in that window, the reader's refcount_inc() runs on a counter that has reached zero. refcount_t catches the addition-on-zero, prints "refcount_t: addition on 0; use-after-free", saturates the counter, and returns the saturated pointer to the caller. Session memory is held live by the in-flight RCU read section, but the kfree_rcu() callback queued from l2tp_session_free() will free it once the grace period closes; a caller that dereferences the returned session past that point hits a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU sleeping lock and the preemption window is real; on stock PREEMPT kernels local_bh_disable() is a preempt_count increment that closes the cross-CPU race in practice (see below). Use refcount_inc_not_zero() and continue the list walk on failure, matching the other session getters in the file. The ifname getter is the only session getter in net/l2tp/ that still uses the bare refcount_inc() pattern; this change restores file-internal consistency. The success path is unchanged.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63919
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: xfrm: input: hold netns during deferred transport reinjection Transport-mode reinjection stores a struct net pointer in skb->cb and uses it later from xfrm_trans_reinject(). That pointer must stay valid until the deferred callback runs. Take a netns reference when queueing deferred reinjection work and drop it after the callback completes. Use maybe_get_net() so the queueing path does not revive a namespace that is already being torn down. This keeps the existing workqueue design and fixes the netns lifetime handling in one place for all users of xfrm_trans_queue_net().

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63920
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ipv6: validate extension header length before copying to cmsg ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options.

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63921
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate(). After patch 1/2 in this series, vti6_update() unlinks and relinks the tunnel through t->net. vti6_siocdevprivate() still uses dev_net(dev) for the collision lookup. For a tunnel moved through IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net. SIOCCHGTUNNEL on a migrated tunnel then runs: net = dev_net(dev) /* migrated netns */ t = vti6_locate(net, &p1, false) /* misses target in t->net */ ... t = netdev_priv(dev) vti6_update(t, &p1, false) /* mutates t->net's hash */ A caller in the migrated netns picks params that match a tunnel in the creation netns. The lookup in dev_net(dev) finds nothing. vti6_update() prepends the migrated tunnel at the head of the creation netns hash bucket for those params. Later lookups in the creation netns resolve to the migrated device. xfrm receive delivers the matched packets through a device the caller controls. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. Switch the SIOCCHGTUNNEL path on a non fallback device to use t->net for the lookup. The lookup now matches the netns vti6_update() operates on. Also add ns_capable(self->net->user_ns, CAP_NET_ADMIN) before the lookup. The check at the top of the case is against dev_net(dev)->user_ns, which after migration is the attacker's netns. A caller there can pick params absent from self->net, the lookup returns NULL, t becomes self, and vti6_update() inserts the device into the creation netns hash. The new check requires CAP_NET_ADMIN in the creation netns user_ns too. SIOCADDTUNNEL and SIOCCHGTUNNEL on the fallback device keep dev_net(dev), which equals init_net there.

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
Ссылки
CVE-2026-63922
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh after handling HAO option ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage.

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63924
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up.

Опубликовано: 2026-07-19Изменено: 2026-10-22
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63925
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: macsec: fix replay protection at XPN lower-PN wrap In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0 and the first branch never fires. If next_pn_halves.lower is also in the upper half, pn_same_half(pn, lower) is true and the XPN else-if does not fire either, leaving next_pn_halves unchanged. An attacker that captures the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association can then replay it indefinitely, since lowest_pn never rises above the captured pn and macsec_decrypt() reconstructs the same IV. Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt of pn == U32_MAX advances next_pn_halves to (upper + 1, 0).

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 8.1
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H
Ссылки
CVE-2026-63926
HIGH8.4

In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: fix tail fragment offset in bpf_msg_push_data When bpf_msg_push_data() inserts data in the middle of a scatterlist entry, it splits the original entry into a left fragment and a right fragment. The right fragment offset is page-local, but the code advances it with `start`, which is the message-global insertion point. For inserts into a non-first SG entry, this over-advances the offset and leaves the split layout inconsistent. Advance the right fragment offset by the fragment-local delta, `start - offset`, which matches the length removed from the front of the original entry.

Опубликовано: 2026-07-19Изменено: 2026-10-22
CVSS 3.xВЫСОКАЯ 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63927
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix use after free in debug code We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time.

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63928
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63929
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes, kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial kref to 1. It then calls dma_resv_add_fence() which takes a second reference (kref=2), and stores a raw pointer in block->fence. On the success path the function returns without calling dma_fence_put() to release the initial reference, so every buffer enqueue permanently leaks one kmalloc-128 allocation. The iio_buffer_cleanup() work item only releases the temporary reference taken during completion signalling by iio_buffer_signal_dmabuf_done(); the initial reference from dma_fence_init() is never released. With four iio_rwdev instances at 240kHz and 512 samples per buffer, this produces ~1875 kmalloc-128 allocations per second matching the observed slab growth exactly. A test with ftrace confirmed that the dma_fence_destroy event was never triggered. Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring ownership of the fence to the DMA reservation object. The DMA fence then gets properly discarded after being signalled.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63930
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe().

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63931
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63933
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63934
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63936
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63937
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer Use READ_ONCE() when reading entries/indices from the guest-accessible Page State Change buffer to defend against TOCTOU bugs. Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing (and not consuming the result!), as the guest isn't supposed to touch the buffer while it's being processed. I.e. using READ_ONCE() is all about protecting against misbehaving guests.

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
Ссылки
CVE-2026-63938
CRITICAL9.3

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Check PSC request indices against the actual size of the buffer When processing Page State Change (PSC) requests, validate the PSC buffer against the effective size of the scratch area, which could be less than the maximum size if the guest provided a pointer that isn't exactly at the start of the GHCB shared buffer.

Опубликовано: 2026-07-19Изменено: 2026-10-27
CVSS 3.xКРИТИЧЕСКАЯ 9.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
Ссылки
CVE-2026-63939
CRITICAL9.3

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role.

Опубликовано: 2026-07-19Изменено: 2026-10-28
CVSS 3.xКРИТИЧЕСКАЯ 9.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H
Ссылки
CVE-2026-63942
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set.

Опубликовано: 2026-07-19Изменено: 2026-10-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63943
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63944
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs).

Опубликовано: 2026-07-19Изменено: 2026-10-26
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63945
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */ iso_pi(sk)->conn is not stable across the unlock window, causing a NULL pointer dereference or use-after-free. Serialize iso_sock_clear_timer() with the socket lock by moving it inside lock_sock()/release_sock(), matching the pattern used in iso_conn_del() and all other call sites.

Опубликовано: 2026-07-19Изменено: 2026-10-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63946
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix UAF in iso_recv_frame iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock before using sk, with no reference held. A concurrent iso_sock_kill() can free sk in that window, causing use-after-free on sk->sk_state and sock_queue_rcv_skb(). Fix by replacing the bare pointer read with iso_sock_hold(conn), which calls sock_hold() while the spinlock is held, atomically elevating the refcount before the lock drops. Add a drop_put label so sock_put() is called on all exit paths where the hold succeeded.

Опубликовано: 2026-07-19Изменено: 2026-10-28
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63947
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard.

Опубликовано: 2026-07-19Изменено: 2026-10-28
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63948
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63949
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63952
HIGH8.4

In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done.

Опубликовано: 2026-07-19Изменено: 2026-10-28
CVSS 3.xВЫСОКАЯ 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:N
Ссылки
CVE-2026-63954
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63956
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63957
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: USB: serial: safe_serial: fix memory corruption with small endpoint Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63958
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63959
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63960
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified. Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq(). Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63961
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63962
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63963
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63964
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: reject firmware images without a ':' record header do_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... } If the firmware image contains no ':' byte, strnchr() returns NULL. NULL compares less than the valid kernel pointer eof, so the loop body runs and strnchr() is called with p + 1 == (void *)1 and a length of roughly (unsigned long)eof, causing a wonderful crash. The not_signed_fw fallthrough earlier in do_flash() and the chip-state branches in ccg_fw_update_needed() allow an unsigned blob to reach this loop, so a root user who can place a crafted file under /lib/firmware and write the do_flash sysfs attribute can trigger the oops. Bail out with -EINVAL when the initial strnchr() returns NULL.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63967
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer The tagged FIFO path declares iio_buff on the stack with __aligned(8) but no initializer, but there is a hole in the structure, which will then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be copied, but the space between that and the timestamp are not initialized. Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan, but for the tagged path it only added the alignment qualifier and not the initializer :( Fix this by just zero-initializing the structure on the stack.

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63968
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev

Опубликовано: 2026-07-19Изменено: 2026-10-30
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63971
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63973
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: mana: Add NULL guards in teardown path to prevent panic on attach failure When queue allocation fails partway through, the error cleanup frees and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as mana_remove(), mana_change_mtu() recovery, and internal error handling in mana_alloc_queues() can subsequently call into functions that dereference these pointers without NULL checks: - mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26). - mana_destroy_vport() iterates apc->rxqs without a NULL check. - mana_fence_rqs() iterates apc->rxqs without a NULL check. - mana_dealloc_queues() iterates apc->tx_qp without a NULL check. Add NULL guards for apc->rxqs in mana_fence_rqs(), mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue draining when TX queues were never allocated or already freed.

Опубликовано: 2026-07-19Изменено: 2026-10-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63975
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63985
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63987
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries).

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63990
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c.

Опубликовано: 2026-07-19Изменено: 2026-10-08
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63991
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails.

Опубликовано: 2026-07-19Изменено: 2026-10-07
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-63992
CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xКРИТИЧЕСКАЯ 9.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-63993
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63994
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63995
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63996
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) comes from last arg to ethtool_cmis_page_init() which is rpl_exp_len. Note2 that AIs also like to point out overflows in args->req.payload itself (which is a fixed-size 120 B buffer, on the stack), but callers should be reading structs defined by the standard, so protecting from requests for more data than max seem like defensive programming.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-63997
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ethtool: module: avoid leaking a netdev ref on module flash errors module_flash_fw_schedule() is missing undo for setting the "in_progress" flag and taking the netdev reference. Delay taking these, the device can't disappear while we are holding rtnl_lock.

Опубликовано: 2026-07-19Изменено: 2026-10-13
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64000
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix potential OOB access in supervision frame handling Ensure the entire TLV header is linearized before access by adding sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this, a truncated frame could cause an out-of-bounds access.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64001
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules.

Опубликовано: 2026-07-19Изменено: 2026-10-21
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64002
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64003
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64004
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64005
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/smc: Do not re-initialize smc hashtables INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(), proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht being reset even though hash entries already exist and are being used, possibly resulting in a corrupted list. Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in smc_init(); it is implicitly initialised to zero anyhow. Add HLIST_HEAD_INIT to the definitions for clarity.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64007
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64009
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64010
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc() A race condition exists in the NFC LLCP connection state machine where the connection acceptance packet (CC) can be processed concurrently with socket release. This can lead to a use-after-free of the socket object. When nfc_llcp_recv_cc() moves the socket from the connecting_sockets list to the sockets list, it does so without holding the socket lock. If llcp_sock_release() is executing concurrently, it might have already unlinked the socket and dropped its references, which can result in nfc_llcp_recv_cc() linking a freed socket into the live list. Fix this by holding lock_sock() during the state transition and list movement in nfc_llcp_recv_cc(). After acquiring the lock, check if the socket is still hashed to ensure it hasn't already been unlinked and marked for destruction by the release path. This aligns the locking pattern with recv_hdlc() and recv_disc().

Опубликовано: 2026-07-19Изменено: 2026-10-13
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64011
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list.

Опубликовано: 2026-07-19Изменено: 2026-10-13
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64012
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peeked When sfb has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (sfb in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(sfb) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (sfb). And herein lies the problem. - sfb will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full) [ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq] [ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b [ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216 [ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0 [ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3 [ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000 [ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000 [ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000 [ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0 [ 127.598390][ T453] PKRU: 55555554 [ 127.598509][ T453] Call Trace: [ 127.598629][ T453] [ 127.598718][ T453] ? mark_held_locks+0x40/0x70 [ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599053][ T453] sfb_dequeue+0x88/0x4d0 [ 127.599174][ T453] ? ktime_get+0x137/0x230 [ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq] [ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf] [ 127.599988][ T453] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead.

Опубликовано: 2026-07-19Изменено: 2026-10-13
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64014
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len.

Опубликовано: 2026-07-19Изменено: 2026-10-24
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-64026
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff.

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64090
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid empty VLAN responses The commit 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") added checks to the local (direct) TT response code. But the response can also be done indirectly by another node using the global TT state. To avoid such inconsistency states reported in the original fix, also avoid sending empty VLANs for replies from the global TT state.

Опубликовано: 2026-07-19Изменено: 2026-08-11
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64091
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix TOCTOU race for reported vlans The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty.

Опубликовано: 2026-07-19Изменено: 2026-08-11
CVSS 3.xКРИТИЧЕСКАЯ 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64093
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone

Опубликовано: 2026-07-19Изменено: 2026-08-11
CVSS 3.xВЫСОКАЯ 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64094
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface Without rtnl_lock held, a hardif might be retrieved as primary interface of a meshif, but then (while operating on this interface) getting decoupled from the mesh interface. In this case, the meshif still exists but the pointer from the primary hardif to the meshif is set to NULL. The mesh_iface must be checked first to be non-NULL before continuing to send an ARP request using meshif.

Опубликовано: 2026-07-19Изменено: 2026-08-11
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64095
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid double decrement of bla.num_requests The bla.num_requests is increased when no request_sent was in progress. And it is decremented in various places (announcement was received, backbone is purged, periodic work). But the check if the request_sent is actually set to a specific state and the atomic_dec/_inc are not safe because they are not atomic (TOCTOU) and multiple such code portions can run concurrently. At the same time, it is necessary to modify request_sent (state) and bla.num_requests atomically. Otherwise batadv_bla_send_request() might set request_sent to 1 and is interrupted. batadv_handle_announce() can then set request_sent back to 0 and decrement num_requests before batadv_bla_send_request() incremented it. The two operations must therefore be locked. And since state (request_sent) and wait_periods are only accessed inside this lock, they can be converted to simpler datatypes. And to avoid that the bla.num_requests is touched by a parallel running context with a valid backbone_gw reference after batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to correctly signal that a backbone_gw is in the state of being cleaned up.

Опубликовано: 2026-07-19Изменено: 2026-08-11
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H
Ссылки
CVE-2026-64099
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix use-after-free of CPU job query arrays on error path The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and performance query arrays after v3d_job_cleanup(), which drops the job's last reference and frees cpu_job. Reading cpu_job at that point is a use-after-free. Also, on the early v3d_job_init() failure path, it is a NULL dereference, since v3d_job_deallocate() zeroes the local pointer. In the success path, the arrays are released from the scheduler's .free_job callback, but on the error path, they are freed manually, as the job was never pushed to the scheduler. While the success path deals with this correctly, the fail path doesn't. On top of that, the manual kvfree() calls only free the array storage; they don't drm_syncobj_put() the per-query syncobjs that v3d_timestamp_query_info_free() and v3d_performance_query_info_free() release on the success path. So the same fail path that triggers the use-after-free also leaks one syncobj reference per query. Unify the CPU job teardown into the CPU job's kref destructor, mirroring v3d_render_job_free(). The scheduler's .free_job slot reverts to the generic v3d_sched_job_free() and the fail label drops the manual kvfree() calls, leaving a single teardown path that is reached from both the scheduler and the ioctl error path. That removes the use-after-free, the NULL dereference, and the syncobj leak by construction.

Опубликовано: 2026-07-19Изменено: 2026-08-11
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64123
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: hsr: defer node table free until after RCU readers HSR node-list and node-status generic-netlink operations run under rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table with plain list_del() and frees each node immediately. That lets a generic-netlink reader hold a struct hsr_node pointer across hsr_dellink(). In a KASAN build, widening the reader window after hsr_get_next_node() obtains the node reproduces a slab-use-after-free when the reader copies node->macaddress_A; the freeing stack is hsr_del_nodes() from hsr_dellink(). Use list_del_rcu() and defer the free through the existing hsr_free_node_rcu() callback. This matches the lifetime rule used by the HSR prune paths, which already delete nodes with list_del_rcu() and call_rcu().

Опубликовано: 2026-07-19Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64131
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/memory: fix spurious warning when unmapping device-private/exclusive pages Device private and exclusive entries are only supported for anonymous folios. This condition is tested in __migrate_device_pages() and make_device_exclusive() using folio_test_anon(). However the unmap path tests this assumption using vma_is_anonymous(). This is wrong because whilst anonymous VMAs can only contain folios where folio_test_anon() is true the opposite relation does not hold. A folio for which folio_test_anon() is true does not imply vma_is_anonymous() is true. Such a condition can occur if for example a folio is part of a private filebacked mapping. In this case vma_is_anonymous() is false as the mapping is filebacked, but folio_test_anon() may be true, thus permitting devices to migrate the folio to device private memory. This can lead to the following spurious warnings during process teardown: [ 772.737706] ------------[ cut here ]------------ [ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041 [ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O) [ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full) [ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE [ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a [ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02 [ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286 [ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8 [ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08 [ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68 [ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001 [ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0 [ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000 [ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0 [ 772.779135] Call Trace: [ 772.779792] [ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm] [ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0 [ 772.782992] ? __rwlock_init+0x150/0x150 [ 772.784006] ? lock_release+0x216/0x2b0 [ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0 [ 772.786522] ? lock_release+0x216/0x2b0 [ 772.787498] ? unmap_single_vma+0xb6/0x210 [ 772.788573] unmap_vmas+0x27d/0x520 [ 772.789506] ? unmap_single_vma+0x210/0x210 [ 772.790607] ? mas_update_gap.part.0+0x620/0x620 [ 772.791834] unmap_region+0x19e/0x350 [ 772.792769] ? remove_vma+0x130/0x130 [ 772.793684] ? mas_alloc_nodes+0x1f2/0x300 [ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20 [ 772.795926] ? unmap_region+0x350/0x350 [ 772.796917] do_vmi_align_munmap+0x36a/0x4e0 [ 772.798018] ? lock_release+0x216/0x2b0 [ 772.799024] ? vma_shrink+0x620/0x620 [ 772.799983] do_vmi_munmap+0x150/0x2c0 [ 772.800939] __vm_munmap+0x161/0x2c0 [ 772.801872] ? expand_downwards+0xd60/0xd60 [ 772.802948] ? clockevents_program_event+0x1ef/0x540 [ 772.804217] ? lock_release+0x216/0x2b0 [ 772.805158] __x64_sys_munmap+0x59/0x80 [ 772.805776] do_syscall_64+0xfc/0x670 [ 772.806336] ? irqentry_exit+0xda/0x580 [ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 772.807772] RIP: 0033:0x7f327cbb2717 [ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff ---truncated---

Опубликовано: 2026-07-19Изменено: 2026-08-13
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64222
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware.

Опубликовано: 2026-07-24Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64233
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind uvc_function_bind() walks &opts->extension_units twice without holding opts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors. The configfs side (uvcg_extension_make / uvcg_extension_drop, in drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its list_add_tail / list_del operations. A privileged userspace process that holds the configfs subtree open and writes the gadget UDC name to bind the function while concurrently rmdir()'ing an extensions subdir can race uvcg_extension_drop() against the bind-time list walks and dereference a freed struct uvcg_extension. Hold opts->lock from the start of the XU string-descriptor fixup through the last uvc_copy_descriptors() call, releasing on the descriptor-error path via a new error_unlock label that drops the lock before falling through to the existing error label. This matches the locking discipline of the configfs callbacks and removes the only remaining unsynchronised reader of the XU list during bind. Reachability: only privileged processes that can mount configfs and write to gadget UDC files can trigger the race, so this is a correctness fix rather than a security boundary.

Опубликовано: 2026-07-24Изменено: 2026-08-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64234
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tty: serial: pch_uart: add check for dma_alloc_coherent() Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails.

Опубликовано: 2026-07-24Изменено: 2026-08-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64235
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ]

Опубликовано: 2026-07-24Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 8.1
CVSS:3.x/CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64237
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads.

Опубликовано: 2026-07-24Изменено: 2026-10-24
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2026-64239
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: delete tried region in regions_rmdirs() DAMON sysfs maintains the DAMOS tried region directory objects via a linked list. When the user requests refresh of the directories, DAMON sysfs removes all the region directories first, and then generate updated regions directory on the empty space. The removal function (damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects. Deletion of the container region object from the linked list is done inside the kobj release callback function. If somehow the callback invocation is delayed, the list will contain regions list that gonna be freed. If the updated region directories creation is started in this situation, the list can be corrupted and use-after-free can happen. Because the kobj objects are managed by only DAMON sysfs, the issue cannot happen in normal situation. But, such delays can be made on kernels that built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can indeed be reproduced like below. # damo start --damos_action stat # cd /sys/kernel/mm/damon/admin/kdamonds/0/ # for i in {1..10}; do echo update_schemes_tried_regions > state; done # dmesg | grep underflow [ 89.296152] refcount_t: underflow; use-after-free. Fix the issue by removing the region object from the list when decrementing the reference count. Also update damos_sysfs_populate_region_dir() to add the region object to the list only after the kobject_init_and_add() is success, so that fail of kobject_init_and_add() is not leaving the deallocated object on the list. The issue was discovered [1] by Sashiko.

Опубликовано: 2026-07-24Изменено: 2026-10-27
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64240
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: fix control request setup packet Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet.

Опубликовано: 2026-07-24Изменено: 2026-08-13
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2026-64242
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: net2280: Fix double free in probe error path usb_initialize_gadget() installs gadget_release() as the release callback for the embedded gadget device. The struct net2280 instance is therefore released through gadget_release() when the gadget device's last reference is dropped. The probe error path calls net2280_remove(), which tears down the partially initialized device and drops the gadget reference with usb_put_gadget(). Calling kfree(dev) afterwards can free the same object again. Drop the explicit kfree() and let the gadget device release callback handle the final free. This issue was found by a static analysis tool I am developing.

Опубликовано: 2026-07-24Изменено: 2026-08-13
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2026-64243
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: simple-mux: Fix enum control bounds check simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers.

Опубликовано: 2026-07-24Изменено: 2026-10-19
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки