Все бюллетени/p11/ALT-PU-2025-12713-11
ALT-PU-2025-12713-11

Обновление пакета kernel-image-6.12 в ветке p11

Версия6.12.51-alt1
Задание#396557
Опубликовано2026-04-02
Макс. серьёзностьHIGH
Серьёзность:

Закрытые проблемы (201)

BDU:2025-09049
HIGH7.0

Уязвимость функции icl_update_topdown_event() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-07-27Изменено: 2026-03-03
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-10308
MEDIUM5.5

Уязвимость компонента net ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии

Опубликовано: 2025-08-26Изменено: 2026-03-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-10441
MEDIUM6.1

Уязвимость механизма cgroup подсистемы BPF ядра операционных систем Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации или вызвать отказ в обслуживании

Опубликовано: 2025-08-28Изменено: 2026-04-12
CVSS 3.xСРЕДНЯЯ 6.1
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H
CVSS 2.0СРЕДНЯЯ 5.2
CVSS:2.0/AV:L/AC:L/Au:S/C:P/I:N/A:C
Ссылки
BDU:2025-10722
HIGH7.1

Уязвимость функции s32ton() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-09-04Изменено: 2026-04-12
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
CVSS 2.0СРЕДНЯЯ 6.2
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:N/A:C
Ссылки
BDU:2025-10738
MEDIUM4.8

Уязвимость функции has_locked_children ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-09-04Изменено: 2026-03-17
CVSS 3.xСРЕДНЯЯ 4.8
CVSS:3.x/AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:A/AC:H/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-11508
HIGH7.0

Уязвимость функции kfree_rcu() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-09-22Изменено: 2026-03-18
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-12556
HIGH7.0

Уязвимость функции tls_rx_msg_size() компонента tls ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-06Изменено: 2026-02-15
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-12703
HIGH7.0

Уязвимость функций con_fault_finish() и clear_standby() модуля net/ceph/messenger.c ядра операционной системы Linux, позволяющая нарушителю выполнить произвольный код

Опубликовано: 2025-10-09Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-12704
MEDIUM5.5

Уязвимость функции within the __bpf_async_init() модуля kernel/bpf/helpers.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-09Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-12987
MEDIUM5.5

Уязвимость функции sk_msg_free() файла net/ipv4/af_inet.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-15Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13172
MEDIUM5.5

Уязвимость функции btrfs_del_inode_from_root() модуля fs/btrfs/inode.c ядра оперционной системы Linux, позволяющая нарушителю вызвать отказ в облсуживании

Опубликовано: 2025-10-20Изменено: 2026-03-01
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13173
MEDIUM5.5

Уязвимость функций ocfs2_extent_map_get_blocks(), ocfs2_fiemap_inline() и ocfs2_fiemap() модуля fs/ocfs2/extent_map.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-20Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13242
MEDIUM5.5

Уязвимость функции xfrm_alloc_spi() модуля net/xfrm/xfrm_state.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-21Изменено: 2026-03-01
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13445
MEDIUM4.8

Уязвимость функции tcp_ao_copy_all_matching() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-27Изменено: 2025-12-02
CVSS 3.xСРЕДНЯЯ 4.8
CVSS:3.x/AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:A/AC:H/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13446
MEDIUM4.8

Уязвимость функции tee_shm_put() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-27Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 4.8
CVSS:3.x/AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:A/AC:H/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13447
HIGH8.0

Уязвимость функции Brcmf_btcoex_detach() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-27Изменено: 2026-02-16
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13448
HIGH8.0

Уязвимость функции vhci_release() ядра операционной системы Linux, позволяющая нарушителю повредить память

Опубликовано: 2025-10-27Изменено: 2026-02-16
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13449
MEDIUM4.8

Уязвимость функции smc_ib_is_sg_need_sync() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-10-27Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 4.8
CVSS:3.x/AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:A/AC:H/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13679
MEDIUM5.7

Уязвимость функции list_first_entry() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-04Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 5.7
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 5.2
CVSS:2.0/AV:A/AC:M/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13682
HIGH8.0

Уязвимость функции l2cap_sock_cleanup_listen() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-04Изменено: 2026-02-15
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13684
HIGH8.0

Уязвимость функции cmp_bss() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-04Изменено: 2026-02-16
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13686
HIGH8.0

Уязвимость функции ice_ptp_ts_irq() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-04Изменено: 2026-02-16
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13687
HIGH8.0

Уязвимость функции __mark_inode_dirty() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-04Изменено: 2026-02-16
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13878
HIGH7.0

Уязвимость функции first_remote_rcu() компонента vxlan ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-02-16
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13880
MEDIUM5.5

Уязвимость функции pad_compress_skb() модуля drivers/net/ppp/ppp_generic.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13881
MEDIUM5.5

Уязвимость функции SSID в __cfg80211_connect_result() модуля net/wireless/sme.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13882
HIGH7.0

Уязвимость функции arp_reduce() and neigh_reduce() модуля drivers/net/vxlan/vxlan_core.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-02-16
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13884
HIGH7.0

Уязвимость механизма PSI (Pressure Stall Information) ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13885
HIGH7.0

Уязвимость функции unpoison_memory() модуля mm/memory-failure.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13886
HIGH7.0

Уязвимость функции state_show() модуля mm/damon/sysfs.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании или выполнить произвольный код

Опубликовано: 2025-11-06Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-13887
MEDIUM5.5

Уязвимость функции idxd_free() библиотеки lib/refcount.c компонента dmaengine ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13888
MEDIUM5.5

Уязвимость функции ax25_kiss_rcv() модуля ax25_kiss_rcv ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-02-15
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13892
MEDIUM5.5

Уязвимость функции xcan_write_frame() модуля drivers/net/can/xilinx_can.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13893
MEDIUM5.5

Уязвимость функции idxd_setup_wqs() модуля drivers/dma/idxd/init.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13894
MEDIUM5.5

Уязвимость функции fec_enet_phy_reset_after_clk_enable() модуля drivers/net/ethernet/freescale/fec_main.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13896
MEDIUM5.5

Уязвимость функции edma_setup_from_hw() модуля drivers/dma/ti/edma.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-13898
MEDIUM5.5

Уязвимость функции mtk_drm_get_all_drm_priv() драйвера drivers/gpu/drm/mediatek/mtk_drm_drv.c ядра операционной системы Linux, позволяющая нарушителдю вызвать отказ в обслуживании

Опубликовано: 2025-11-06Изменено: 2026-03-01
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14114
MEDIUM5.8

Уязвимость функции __cifs_sfu_make_node() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 5.8
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H
CVSS 2.0СРЕДНЯЯ 5.0
CVSS:2.0/AV:L/AC:H/Au:S/C:P/I:P/A:C
Ссылки
BDU:2025-14116
MEDIUM5.5

Уязвимость компонента scsi ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14117
MEDIUM5.5

Уязвимость функции ocfs2_delete_osb() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-02-15
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14118
MEDIUM5.5

Уязвимость функции batadv_nc_skb_decode_packet() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-02-15
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14119
MEDIUM5.5

Уязвимость функции set_track_prepare() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14120
MEDIUM5.5

Уязвимость функции __populate_section_memmap() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14121
MEDIUM5.5

Уязвимость функции arch_sync_kernel_mappings() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14122
MEDIUM5.5

Уязвимость функции __iodyn_find_io_region() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-11-13Изменено: 2026-02-15
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-14975
MEDIUM4.3

Уязвимость компонента tx.c ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на целостность защищаемой информации

Опубликовано: 2025-12-02Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 4.3
CVSS:3.x/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N
CVSS 2.0НИЗКАЯ 3.3
CVSS:2.0/AV:A/AC:L/Au:N/C:N/I:P/A:N
Ссылки
BDU:2025-14982
MEDIUM5.5

Уязвимость компонента net/core/gen_estimator.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-02
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-15262
HIGH7.0

Уязвимость компонента accel/ivpu ядра операционной системы Linux, связанная с использованием памяти после её освобождения, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2025-12-04
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2025-15263
MEDIUM6.6

Уязвимость компонента net ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2025-12-04
CVSS 3.xСРЕДНЯЯ 6.6
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H
CVSS 2.0СРЕДНЯЯ 5.7
CVSS:2.0/AV:L/AC:L/Au:S/C:P/I:P/A:C
Ссылки
BDU:2025-15658
MEDIUM5.3

Уязвимость компонента netfilter ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-13Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.3
CVSS:3.x/AV:A/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:A/AC:H/Au:N/C:N/I:N/A:C
Ссылки
BDU:2025-15665
MEDIUM6.5

Уязвимость компонента arch/x86 ядра операционной системы Linux, позволяющая нарушителю получить доступ к конфиденциальным данным

Опубликовано: 2025-12-14Изменено: 2026-03-03
CVSS 3.xСРЕДНЯЯ 6.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N
CVSS 2.0НИЗКАЯ 1.7
CVSS:2.0/AV:L/AC:L/Au:S/C:P/I:N/A:N
Ссылки
BDU:2025-15666
MEDIUM6.6

Уязвимость компонента ixgbe_ethtool.c ядра операционной системы Linux, позволяющая нарушителю получить доступ к конфиденциальным данным, нарушить их целостность, а также вызвать отказ в обслуживании

Опубликовано: 2025-12-14
CVSS 3.xСРЕДНЯЯ 6.6
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H
CVSS 2.0СРЕДНЯЯ 5.7
CVSS:2.0/AV:L/AC:L/Au:S/C:P/I:P/A:C
Ссылки
BDU:2025-15667
MEDIUM5.5

Уязвимость функции do_validate_mem() компонента rsrc_nonstatic.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-14Изменено: 2026-02-15
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-15668
MEDIUM4.4

Уязвимость компонента of_numa.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-14
CVSS 3.xСРЕДНЯЯ 4.4
CVSS:3.x/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:L/AC:L/Au:M/C:N/I:N/A:C
Ссылки
BDU:2025-15669
MEDIUM5.5

Уязвимость компонента slub.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-14Изменено: 2026-02-15
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-15672
MEDIUM5.5

Уязвимость компонента mm/userfaultfd ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-15673
MEDIUM5.5

Уязвимость функции sched_numa_find_nth_cpu() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2025-15674
MEDIUM4.7

Уязвимость модуля wifi ядра операционной системы Linux, позволяющая нарушителю получить доступ к конфиденциальным данным

Опубликовано: 2025-12-14Изменено: 2026-02-16
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N
CVSS 2.0НИЗКАЯ 3.8
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:N/A:N
Ссылки
BDU:2025-16058
MEDIUM5.5

Уязвимость компонента crypto/af_alg.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2025-12-17Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-01018
MEDIUM5.5

Уязвимость ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-01-29Изменено: 2026-03-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-01019
MEDIUM5.5

Уязвимость ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-01-29Изменено: 2026-03-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-01346
HIGH8.0

Уязвимость функции stripe_io_hints() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-02-05
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-01348
HIGH8.0

Уязвимость функции ieee80211_register_hw() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-02-05Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02288
MEDIUM5.5

Уязвимость функции raid1_read_request() модуля drivers/md/raid1.c драйвера поддержки нескольких устройств (RAID и LVM) ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-02-25Изменено: 2026-03-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02291
MEDIUM5.5

Уязвимость функции ext4_put_super() в модуле fs/ext4/super.c файловой системы Ext4 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-02-25Изменено: 2026-03-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02292
HIGH7.8

Уязвимость функции ath11k_reg_notifier() в модуле drivers/net/wireless/ath/ath11k/reg.c драйвера адаптеров беспроводной связи Atheros/Qualcomm ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-02-25Изменено: 2026-03-03
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02381
MEDIUM5.5

Уязвимость функции ipvlan_l3s_unregister() в модуле drivers/net/ipvlan/ipvlan_l3s.c драйвера поддержки сетевых устройств ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-02-26Изменено: 2026-03-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02382
HIGH7.8

Уязвимость функции i40e_vsi_request_irq_msix() в модуле drivers/net/ethernet/intel/i40e/i40e_main.c драйвера сетевых адаптеров Ethernet Intel ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-01Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02384
HIGH7.0

Уязвимость функции trace_pid_write() в модуле kernel/trace/trace.c поддержки трассировки ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-01Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02391
MEDIUM5.5

Уязвимость функции bam_dma_probe() в модуле drivers/dma/qcom/bam_dma.c драйвера движка DMA ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-01Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02392
MEDIUM5.5

Уязвимость функции damon_reclaim_apply_parameters() в модуле mm/damon/reclaim.c подсистемы управления памятью ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-01Изменено: 2026-03-10
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02405
HIGH7.8

Уязвимость функции tcp_disconnect() модуля net/ipv4/tcp.c реализации протокола IPv4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-01Изменено: 2026-03-10
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02406
HIGH7.8

Уязвимость функции io_link_skb() модуля io_uring/notif.c интерфейса асинхронного ввода/вывода ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-01
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0СРЕДНЯЯ 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02671
HIGH8.0

Уязвимость функции qed_protection_override_dump() в модуле drivers/net/ethernet/qlogic/qed/qed_debug.c драйвера сетевых адаптеров Ethernet Qlogic ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02672
HIGH8.0

Уязвимость функции virtio_uml_probe() в модуле arch/um/drivers/virtio_uml.c 1 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02673
HIGH8.0

Уязвимость функции recv_done() в модуле fs/smb/server/transport_rdma.c поддержки сервера SMB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02674
HIGH8.0

Уязвимость функции otx2_ptp_destroy() в модуле drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c драйвера сетевых адаптеров Ethernet Marvell ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02675
HIGH8.0

Уязвимость функции cnic_cm_stop_bnx2x_hw() в модуле drivers/net/ethernet/broadcom/cnic.c драйвера сетевых адаптеров Ethernet Broadcom ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
BDU:2026-02676
MEDIUM6.0

Уязвимость функции bpf_crypto_crypt() в модуле kernel/bpf/crypto.c поддержки интерпретатора BPF ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на целостность защищаемой информации или вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 6.0
CVSS:3.x/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:H
CVSS 2.0СРЕДНЯЯ 5.9
CVSS:2.0/AV:L/AC:L/Au:M/C:N/I:C/A:C
Ссылки
BDU:2026-02677
MEDIUM5.7

Уязвимость функции smbd_negotiate() в модуле fs/smb/client/smbdirect.c поддержки клиента SMB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.7
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 5.5
CVSS:2.0/AV:A/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02678
MEDIUM5.7

Уязвимость функции af_alg_sendmsg() в модуле crypto/af_alg.c криптографической подсистемы ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.7
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 5.5
CVSS:2.0/AV:A/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02679
MEDIUM5.7

Уязвимость функции anx7625_i2c_probe() в модуле drivers/gpu/drm/bridge/analogix/anx7625.c драйвера инфраструктуры прямого рендеринга (DRI) ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.7
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 5.5
CVSS:2.0/AV:A/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02680
MEDIUM5.7

Уязвимость функции rfkill_gpio_acpi_probe() в модуле net/rfkill/rfkill-gpio.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.7
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 5.5
CVSS:2.0/AV:A/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02681
MEDIUM4.8

Уязвимость функции q6apm_lpass_dai_prepare() в модуле sound/soc/qcom/qdsp6/q6apm-lpass-dais.c поддержки звука SoC ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 4.8
CVSS:3.x/AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:A/AC:H/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02682
LOW3.5

Уязвимость функции recv_done() в модуле fs/smb/server/transport_rdma.c поддержки сервера SMB ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xНИЗКАЯ 3.5
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N
CVSS 2.0НИЗКАЯ 2.7
CVSS:2.0/AV:A/AC:L/Au:S/C:P/I:N/A:N
Ссылки
BDU:2026-02683
MEDIUM5.5

Уязвимость функции damon_lru_sort_apply_parameters() в модуле mm/damon/lru_sort.c подсистемы управления памятью ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02684
MEDIUM5.5

Уязвимость функции genl_bind() в модуле net/netlink/genetlink.c поддержки интерфейса мониторинга сокетов NETLINK ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02685
MEDIUM4.8

Уязвимость функции tcp_ao_finish_connect() в модуле net/ipv4/tcp_ao.c реализации протокола IPv4 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 4.8
CVSS:3.x/AV:A/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.3
CVSS:2.0/AV:A/AC:H/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02705
MEDIUM5.5

Уязвимость функции fbcon_set_font() модуля drivers/video/fbdev/core/fbcon.c драйвера устройств кадрового буфера ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02754
MEDIUM5.5

Уязвимость компонента io_uring/kbuf ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02755
MEDIUM5.5

Уязвимость компонента stm32_fmc2_nand.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02756
MEDIUM5.5

Уязвимость компонента nfs/localio ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02757
MEDIUM5.5

Уязвимость компонентов ice ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02758
MEDIUM5.5

Уязвимость компонента cgroup ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09Изменено: 2026-03-11
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02759
MEDIUM5.5

Уязвимость компонента igc ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0СРЕДНЯЯ 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-02760
MEDIUM4.7

Уязвимость компонента iommufd ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Опубликовано: 2026-03-09
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0НИЗКАЯ 3.8
CVSS:2.0/AV:L/AC:H/Au:S/C:N/I:N/A:C
Ссылки
BDU:2026-03317
HIGH7.1

Уязвимость функций i40e_dbg_command_read(), i40e_dbg_netdev_ops_read(), i40e_dbg_netdev_ops_write() модуля drivers/net/ethernet/intel/i40e/i40e_debugfs.c драйвера сетевых адаптеров Ethernet Intel ядра операционной системы Linux, позволяющая нарушителю получить доступ к защищаемой информации или вызвать отказ в обслуживании

Опубликовано: 2026-03-17
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
CVSS 2.0СРЕДНЯЯ 6.2
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:N/A:C
Ссылки
BDU:2026-03367
MEDIUM6.3

Уязвимость функции mdsc_show(), ceph_unlink(), ceph_open(), ceph_mdsc_release_request() драйвера fs/ceph поддержки распределенной файловой системы Ceph ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на целостность защищаемой информации или вызвать отказ в обслуживании

Опубликовано: 2026-03-18
CVSS 3.xСРЕДНЯЯ 6.3
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H
CVSS 2.0СРЕДНЯЯ 5.5
CVSS:2.0/AV:L/AC:H/Au:S/C:N/I:C/A:C
Ссылки
BDU:2026-04408
HIGH8.0

Уязвимость функции smbd_destroy() модуля fs/smb/client/smbdirect.c поддержки клиента SMB ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Опубликовано: 2026-03-31
CVSS 3.xВЫСОКАЯ 8.0
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0ВЫСОКАЯ 7.7
CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C
Ссылки
CVE-2025-22103
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.

Опубликовано: 2025-04-16Изменено: 2025-11-24
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-22106
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: unregister xdp rxq info in the reset path vmxnet3 does not unregister xdp rxq info in the vmxnet3_reset_work() code path as vmxnet3_rq_destroy() is not invoked in this code path. So, we get below message with a backtrace. Missing unregister, handled but fix driver WARNING: CPU:48 PID: 500 at net/core/xdp.c:182 __xdp_rxq_info_reg+0x93/0xf0 This patch fixes the problem by moving the unregister code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup().

Опубликовано: 2025-04-16Изменено: 2025-11-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-22113
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here.

Опубликовано: 2025-04-16Изменено: 2025-11-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-22124
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb In clustermd, separate write-intent-bitmaps are used for each cluster node: 0 4k 8k 12k ------------------------------------------------------------------- | idle | md super | bm super [0] + bits | | bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] | | bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits | | bm bits [3, contd] | | | So in node 1, pg_index in __write_sb_page() could equal to bitmap->storage.file_pages. Then bitmap_limit will be calculated to 0. md_super_write() will be called with 0 size. That means the first 4k sb area of node 1 will never be updated through filemap_write_page(). This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize. Here use (pg_index % bitmap->storage.file_pages) to make calculation of bitmap_limit correct.

Опубликовано: 2025-04-16Изменено: 2025-11-03
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-22125
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: don't ignore IO flags If blk-wbt is enabled by default, it's found that raid write performance is quite bad because all IO are throttled by wbt of underlying disks, due to flag REQ_IDLE is ignored. And turns out this behaviour exist since blk-wbt is introduced. Other than REQ_IDLE, other flags should not be ignored as well, for example REQ_META can be set for filesystems, clearing it can cause priority reverse problems; And REQ_NOWAIT should not be cleared as well, because io will wait instead of failing directly in underlying disks. Fix those problems by keep IO flags from master bio. Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT")

Опубликовано: 2025-04-16Изменено: 2026-04-27
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-23133
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: update channel list in reg notifier instead reg worker Currently when ath11k gets a new channel list, it will be processed according to the following steps: 1. update new channel list to cfg80211 and queue reg_work. 2. cfg80211 handles new channel list during reg_work. 3. update cfg80211's handled channel list to firmware by ath11k_reg_update_chan_list(). But ath11k will immediately execute step 3 after reg_work is just queued. Since step 2 is asynchronous, cfg80211 may not have completed handling the new channel list, which may leading to an out-of-bounds write error: BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list Call Trace: ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k] kfree+0x109/0x3a0 ath11k_regd_update+0x1cf/0x350 [ath11k] ath11k_regd_update_work+0x14/0x20 [ath11k] process_one_work+0xe35/0x14c0 Should ensure step 2 is completely done before executing step 3. Thus Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set, cfg80211 will notify ath11k after step 2 is done. So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will notify ath11k after step 2 is done. At this time, there will be no KASAN bug during the execution of the step 3. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/ Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Опубликовано: 2025-04-16Изменено: 2025-11-04
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-38272
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: dsa: b53: do not enable EEE on bcm63xx BCM63xx internal switches do not support EEE, but provide multiple RGMII ports where external PHYs may be connected. If one of these PHYs are EEE capable, we may try to enable EEE for the MACs, which then hangs the system on access of the (non-existent) EEE registers. Fix this by checking if the switch actually supports EEE before attempting to configure it.

Опубликовано: 2025-07-10Изменено: 2025-11-20
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-38306
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: fs/fhandle.c: fix a race in call of has_locked_children() may_decode_fh() is calling has_locked_children() while holding no locks. That's an oopsable race... The rest of the callers are safe since they are holding namespace_sem and are guaranteed a positive refcount on the mount in question. Rename the current has_locked_children() to __has_locked_children(), make it static and switch the fs/namespace.c users to it. Make has_locked_children() a wrapper for __has_locked_children(), calling the latter under read_seqlock_excl(&mount_lock).

Опубликовано: 2025-07-10Изменено: 2025-11-18
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-38322
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix crash in icl_update_topdown_event() The perf_fuzzer found a hard-lockup crash on a RaptorLake machine: Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000 CPU: 23 UID: 0 PID: 0 Comm: swapper/23 Tainted: [W]=WARN Hardware name: Dell Inc. Precision 9660/0VJ762 RIP: 0010:native_read_pmc+0x7/0x40 Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ... RSP: 000:fffb03100273de8 EFLAGS: 00010046 .... Call Trace: icl_update_topdown_event+0x165/0x190 ? ktime_get+0x38/0xd0 intel_pmu_read_event+0xf9/0x210 __perf_event_read+0xf9/0x210 CPUs 16-23 are E-core CPUs that don't support the perf metrics feature. The icl_update_topdown_event() should not be invoked on these CPUs. It's a regression of commit: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") The bug introduced by that commit is that the is_topdown_event() function is mistakenly used to replace the is_topdown_count() call to check if the topdown functions for the perf metrics feature should be invoked. Fix it.

Опубликовано: 2025-07-10Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-38453
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU syzbot reports that defer/local task_work adding via msg_ring can hit a request that has been freed: CPU: 1 UID: 0 PID: 19356 Comm: iou-wrk-19354 Not tainted 6.16.0-rc4-syzkaller-00108-g17bbde2e1716 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 io_req_local_work_add io_uring/io_uring.c:1184 [inline] __io_req_task_work_add+0x589/0x950 io_uring/io_uring.c:1252 io_msg_remote_post io_uring/msg_ring.c:103 [inline] io_msg_data_remote io_uring/msg_ring.c:133 [inline] __io_msg_ring_data+0x820/0xaa0 io_uring/msg_ring.c:151 io_msg_ring_data io_uring/msg_ring.c:173 [inline] io_msg_ring+0x134/0xa00 io_uring/msg_ring.c:314 __io_issue_sqe+0x17e/0x4b0 io_uring/io_uring.c:1739 io_issue_sqe+0x165/0xfd0 io_uring/io_uring.c:1762 io_wq_submit_work+0x6e9/0xb90 io_uring/io_uring.c:1874 io_worker_handle_work+0x7cd/0x1180 io_uring/io-wq.c:642 io_wq_worker+0x42f/0xeb0 io_uring/io-wq.c:696 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 which is supposed to be safe with how requests are allocated. But msg ring requests alloc and free on their own, and hence must defer freeing to a sane time. Add an rcu_head and use kfree_rcu() in both spots where requests are freed. Only the one in io_msg_tw_complete() is strictly required as it has been visible on the other ring, but use it consistently in the other spot as well. This should not cause any other issues outside of KASAN rightfully complaining about it.

Опубликовано: 2025-07-25Изменено: 2025-11-19
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-38502
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix oob access in cgroup local storage Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context: ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype]; if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf); For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access. To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps.

Опубликовано: 2025-08-16Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-38556
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: HID: core: Harden s32ton() against conversion to 0 bits Testing by the syzbot fuzzer showed that the HID core gets a shift-out-of-bounds exception when it tries to convert a 32-bit quantity to a 0-bit quantity. Ideally this should never occur, but there are buggy devices and some might have a report field with size set to zero; we shouldn't reject the report or the device just because of that. Instead, harden the s32ton() routine so that it returns a reasonable result instead of crashing when it is called with the number of bits set to 0 -- the same as what snto32() does.

Опубликовано: 2025-08-19Изменено: 2026-01-19
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39816
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: always use READ_ONCE() to read ring provided buffer lengths Since the buffers are mapped from userspace, it is prudent to use READ_ONCE() to read the value into a local variable, and use that for any other actions taken. Having a stable read of the buffer length avoids worrying about it changing after checking, or being read multiple times. Similarly, the buffer may well change in between it being picked and being committed. Ensure the looping for incremental ring buffer commit stops if it hits a zero sized buffer, as no further progress can be made at that point.

Опубликовано: 2025-09-16Изменено: 2026-04-11
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39838
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL pointer dereference in UTF16 conversion There can be a NULL pointer dereference bug here. NULL is passed to __cifs_sfu_make_node without checks, which passes it unchecked to cifs_strndup_to_utf16, which in turn passes it to cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash. This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and returns NULL early to prevent dereferencing NULL pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39839
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix OOB read/write in network-coding decode batadv_nc_skb_decode_packet() trusts coded_len and checks only against skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing payload headroom, and the source skb length is not verified, allowing an out-of-bounds read and a small out-of-bounds write. Validate that coded_len fits within the payload area of both destination and source sk_buffs before XORing.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39841
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix buffer free/clear order in deferred receive path Fix a use-after-free window by correcting the buffer release sequence in the deferred receive path. The code freed the RQ buffer first and only then cleared the context pointer under the lock. Concurrent paths (e.g., ABTS and the repost path) also inspect and release the same pointer under the lock, so the old order could lead to double-free/UAF. Note that the repost path already uses the correct pattern: detach the pointer under the lock, then free it after dropping the lock. The deferred path should do the same.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39842
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ocfs2: prevent release journal inode after journal shutdown Before calling ocfs2_delete_osb(), ocfs2_journal_shutdown() has already been executed in ocfs2_dismount_volume(), so osb->journal must be NULL. Therefore, the following calltrace will inevitably fail when it reaches jbd2_journal_release_jbd_inode(). ocfs2_dismount_volume()-> ocfs2_delete_osb()-> ocfs2_free_slot_info()-> __ocfs2_free_slot_info()-> evict()-> ocfs2_evict_inode()-> ocfs2_clear_inode()-> jbd2_journal_release_jbd_inode(osb->journal->j_journal, Adding osb->journal checks will prevent null-ptr-deref during the above execution path.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39843
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm: slub: avoid wake up kswapd in set_track_prepare set_track_prepare() can incur lock recursion. The issue is that it is called from hrtimer_start_range_ns holding the per_cpu(hrtimer_bases)[n].lock, but when enabled CONFIG_DEBUG_OBJECTS_TIMERS, may wake up kswapd in set_track_prepare, and try to hold the per_cpu(hrtimer_bases)[n].lock. Avoid deadlock caused by implicitly waking up kswapd by passing in allocation flags, which do not contain __GFP_KSWAPD_RECLAIM in the debug_objects_fill_pool() case. Inside stack depot they are processed by gfp_nested_mask(). Since ___slab_alloc() has preemption disabled, we mask out __GFP_DIRECT_RECLAIM from the flags there. The oops looks something like: BUG: spinlock recursion on CPU#3, swapper/3/0 lock: 0xffffff8a4bf29c80, .magic: dead4ead, .owner: swapper/3/0, .owner_cpu: 3 Hardware name: Qualcomm Technologies, Inc. Popsicle based on SM8850 (DT) Call trace: spin_bug+0x0 _raw_spin_lock_irqsave+0x80 hrtimer_try_to_cancel+0x94 task_contending+0x10c enqueue_dl_entity+0x2a4 dl_server_start+0x74 enqueue_task_fair+0x568 enqueue_task+0xac do_activate_task+0x14c ttwu_do_activate+0xcc try_to_wake_up+0x6c8 default_wake_function+0x20 autoremove_wake_function+0x1c __wake_up+0xac wakeup_kswapd+0x19c wake_all_kswapds+0x78 __alloc_pages_slowpath+0x1ac __alloc_pages_noprof+0x298 stack_depot_save_flags+0x6b0 stack_depot_save+0x14 set_track_prepare+0x5c ___slab_alloc+0xccc __kmalloc_cache_noprof+0x470 __set_page_owner+0x2bc post_alloc_hook[jt]+0x1b8 prep_new_page+0x28 get_page_from_freelist+0x1edc __alloc_pages_noprof+0x13c alloc_slab_page+0x244 allocate_slab+0x7c ___slab_alloc+0x8e8 kmem_cache_alloc_noprof+0x450 debug_objects_fill_pool+0x22c debug_object_activate+0x40 enqueue_hrtimer[jt]+0xdc hrtimer_start_range_ns+0x5f8 ...

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39844
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm: move page table sync declarations to linux/pgtable.h During our internal testing, we started observing intermittent boot failures when the machine uses 4-level paging and has a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] It turns out that the kernel panics while initializing vmemmap (struct page array) when the vmemmap region spans two PGD entries, because the new PGD entry is only installed in init_mm.pgd, but not in the page tables of other tasks. And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap); In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c synchronizes the top level page table (See commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so that all tasks in the system can see the new vmemmap area. However, when vmemmap_can_optimize() returns true, the optimized path skips synchronization of top-level page tables. This is because vmemmap_populate_compound_pages() is implemented in core MM code, which does not handle synchronization of the top-level page tables. Instead, the core MM has historically relied on each architecture to perform this synchronization manually. We're not the first party to encounter a crash caused by not-sync'd top level page tables: earlier this year, Gwan-gyeong Mun attempted to address the issue [1] [2] after hitting a kernel panic when x86 code accessed the vmemmap area before the corresponding top-level entries were synced. At that time, the issue was believed to be triggered only when struct page was enlarged for debugging purposes, and the patch did not get further updates. It turns out that current approach of relying on each arch to handle the page table sync manually is fragile because 1) it's easy to forget to sync the top level page table, and 2) it's also easy to overlook that the kernel should not access the vmemmap and direct mapping areas before the sync. # The solution: Make page table sync more code robust and harder to miss To address this, Dave Hansen suggested [3] [4] introducing {pgd,p4d}_populate_kernel() for updating kernel portion of the page tables and allow each architecture to explicitly perform synchronization when installing top-level entries. With this approach, we no longer need to worry about missing the sync step, reducing the risk of future regressions. The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK, PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by vmalloc and ioremap to synchronize page tables. pgd_populate_kernel() looks like this: static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d) { pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr); } It is worth noting that vmalloc() and apply_to_range() carefully synchronizes page tables by calling p*d_alloc_track() and arch_sync_kernel_mappings(), and thus they are not affected by ---truncated---

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39845
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39846
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region() In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39847
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ppp: fix memory leak in pad_compress_skb If alloc_skb() fails in pad_compress_skb(), it returns NULL without releasing the old skb. The caller does: skb = pad_compress_skb(ppp, skb); if (!skb) goto drop; drop: kfree_skb(skb); When pad_compress_skb() returns NULL, the reference to the old skb is lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak. Align pad_compress_skb() semantics with realloc(): only free the old skb if allocation and compression succeed. At the call site, use the new_skb variable so the original skb is not lost when pad_compress_skb() fails.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39848
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ax25: properly unshare skbs in ax25_kiss_rcv() Bernard Pidoux reported a regression apparently caused by commit c353e8983e0d ("net: introduce per netns packet chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without a major crash. But the root cause is that ax25_kiss_rcv() can queue/mangle input skb without checking if this skb is shared or not. Many thanks to Bernard Pidoux for his help, diagnosis and tests. We had a similar issue years ago fixed with commit 7aaed57c5c28 ("phonet: properly unshare skbs in phonet_rcv()").

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39849
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result() If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would lead to memory corruption so add some bounds checking.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39850
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD in {arp,neigh}_reduce() when using nexthop objects When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0

Опубликовано: 2025-09-19Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39851
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD when refreshing an FDB entry with a nexthop object VXLAN FDB entries can point to either a remote destination or an FDB nexthop group. The latter is usually used in EVPN deployments where learning is disabled. However, when learning is enabled, an incoming packet might try to refresh an FDB entry that points to an FDB nexthop group and therefore does not have a remote. Such packets should be dropped, but they are only dropped after dereferencing the non-existent remote, resulting in a NPD [1] which can be reproduced using [2]. Fix by dropping such packets earlier. Remove the misleading comment from first_remote_rcu(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_snoop+0x98/0x1e0 [...] Call Trace: vxlan_encap_bypass+0x209/0x240 encap_bypass_if_local+0xb1/0x100 vxlan_xmit_one+0x1375/0x17e0 vxlan_xmit+0x6b4/0x15f0 dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip address add 192.0.2.2/32 dev lo ip nexthop add id 1 via 192.0.2.3 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020 bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q

Опубликовано: 2025-09-19Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39852
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/tcp: Fix socket memory leak in TCP-AO failure handling for IPv6 When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just exits the function. This ends up causing a memory-leak: unreferenced object 0xffff0000281a8200 (size 2496): comm "softirq", pid 0, jiffies 4295174684 hex dump (first 32 bytes): 7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................ 0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............ backtrace (crc 5ebdbe15): kmemleak_alloc+0x44/0xe0 kmem_cache_alloc_noprof+0x248/0x470 sk_prot_alloc+0x48/0x120 sk_clone_lock+0x38/0x3b0 inet_csk_clone_lock+0x34/0x150 tcp_create_openreq_child+0x3c/0x4a8 tcp_v6_syn_recv_sock+0x1c0/0x620 tcp_check_req+0x588/0x790 tcp_v6_rcv+0x5d0/0xc18 ip6_protocol_deliver_rcu+0x2d8/0x4c0 ip6_input_finish+0x74/0x148 ip6_input+0x50/0x118 ip6_sublist_rcv+0x2fc/0x3b0 ipv6_list_rcv+0x114/0x170 __netif_receive_skb_list_core+0x16c/0x200 netif_receive_skb_list_internal+0x1f0/0x2d0 This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need to be called. They make sure the newsk will end up being correctly free'd. tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit label that takes care of things. So, this patch here makes sure tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar error-handling and thus fixes the leak for TCP-AO.

Опубликовано: 2025-09-19Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39853
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix potential invalid access when MAC list is empty list_first_entry() never returns NULL - if the list is empty, it still returns a pointer to an invalid object, leading to potential invalid memory access when dereferenced. Fix this by using list_first_entry_or_null instead of list_first_entry.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39854
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ll_ts_intr Recent versions of the E810 firmware have support for an extra interrupt to handle report of the "low latency" Tx timestamps coming from the specialized low latency firmware interface. Instead of polling the registers, software can wait until the low latency interrupt is fired. This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ll_ts_intr() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the issues fixed in the ice_ptp_ts_irq() function. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access.

Опубликовано: 2025-09-19Изменено: 2026-01-14
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39857
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix one NULL pointer dereference in smc_ib_is_sg_need_sync() BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39860
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen() syzbot reported the splat below without a repro. In the splat, a single thread calling bt_accept_dequeue() freed sk and touched it after that. The root cause would be the racy l2cap_sock_cleanup_listen() call added by the cited commit. bt_accept_dequeue() is called under lock_sock() except for l2cap_sock_release(). Two threads could see the same socket during the list iteration in bt_accept_dequeue(): CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAF Depending on the timing, the other thread could show up in the "Freed by task" part. Let's call l2cap_sock_cleanup_listen() under lock_sock() in l2cap_sock_release(). [0]: BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995 CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2accf8ebe9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_nopro ---truncated---

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39861
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: vhci: Prevent use-after-free by removing debugfs files early Move the creation of debugfs files into a dedicated function, and ensure they are explicitly removed during vhci_release(), before associated data structures are freed. Previously, debugfs files such as "force_suspend", "force_wakeup", and others were created under hdev->debugfs but not removed in vhci_release(). Since vhci_release() frees the backing vhci_data structure, any access to these files after release would result in use-after-free errors. Although hdev->debugfs is later freed in hci_release_dev(), user can access files after vhci_data is freed but before hdev->debugfs is released.

Опубликовано: 2025-09-19Изменено: 2026-01-14
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39863
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work The brcmf_btcoex_detach() only shuts down the btcoex timer, if the flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which runs as timer handler, sets timer_on to false. This creates critical race conditions: 1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc() is executing, it may observe timer_on as false and skip the call to timer_shutdown_sync(). 2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info worker after the cancel_work_sync() has been executed, resulting in use-after-free bugs. The use-after-free bugs occur in two distinct scenarios, depending on the timing of when the brcmf_btcoex_info struct is freed relative to the execution of its worker thread. Scenario 1: Freed before the worker is scheduled The brcmf_btcoex_info is deallocated before the worker is scheduled. A race condition can occur when schedule_work(&bt_local->work) is called after the target memory has been freed. The sequence of events is detailed below: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | kfree(cfg->btcoex); // FREE | | schedule_work(&bt_local->work); // USE Scenario 2: Freed after the worker is scheduled The brcmf_btcoex_info is freed after the worker has been scheduled but before or during its execution. In this case, statements within the brcmf_btcoex_handler() — such as the container_of macro and subsequent dereferences of the brcmf_btcoex_info object will cause a use-after-free access. The following timeline illustrates this scenario: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | schedule_work(); // Reschedule | kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker /* | btci = container_of(....); // USE The kfree() above could | ... also occur at any point | btci-> // USE during the worker's execution| */ | To resolve the race conditions, drop the conditional check and call timer_shutdown_sync() directly. It can deactivate the timer reliably, regardless of its current state. Once stopped, the timer_on state is then set to false.

Опубликовано: 2025-09-19Изменено: 2026-03-25
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39864
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix use-after-free in cmp_bss() Following bss_free() quirk introduced in commit 776b3580178f ("cfg80211: track hidden SSID networks properly"), adjust cfg80211_update_known_bss() to free the last beacon frame elements only if they're not shared via the corresponding 'hidden_beacon_bss' pointer.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39865
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tee: fix NULL pointer dereference in tee_shm_put tee_shm_put have NULL pointer dereference: __optee_disable_shm_cache --> shm = reg_pair_to_ptr(...);//shm maybe return NULL tee_shm_free(shm); --> tee_shm_put(shm);//crash Add check in tee_shm_put to fix it. panic log: Unable to handle kernel paging request at virtual address 0000000000100cca Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000002049d07000 [0000000000100cca] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 2 PID: 14442 Comm: systemd-sleep Tainted: P OE ------- ---- 6.6.0-39-generic #38 Source Version: 938b255f6cb8817c95b0dd5c8c2944acfce94b07 Hardware name: greatwall GW-001Y1A-FTH, BIOS Great Wall BIOS V3.0 10/26/2022 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tee_shm_put+0x24/0x188 lr : tee_shm_free+0x14/0x28 sp : ffff001f98f9faf0 x29: ffff001f98f9faf0 x28: ffff0020df543cc0 x27: 0000000000000000 x26: ffff001f811344a0 x25: ffff8000818dac00 x24: ffff800082d8d048 x23: ffff001f850fcd18 x22: 0000000000000001 x21: ffff001f98f9fb88 x20: ffff001f83e76218 x19: ffff001f83e761e0 x18: 000000000000ffff x17: 303a30303a303030 x16: 0000000000000000 x15: 0000000000000003 x14: 0000000000000001 x13: 0000000000000000 x12: 0101010101010101 x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800080e08d0c x8 : ffff001f98f9fb88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff001f83e761e0 x1 : 00000000ffff001f x0 : 0000000000100cca Call trace: tee_shm_put+0x24/0x188 tee_shm_free+0x14/0x28 __optee_disable_shm_cache+0xa8/0x108 optee_shutdown+0x28/0x38 platform_shutdown+0x28/0x40 device_shutdown+0x144/0x2b0 kernel_power_off+0x3c/0x80 hibernate+0x35c/0x388 state_store+0x64/0x80 kobj_attr_store+0x14/0x28 sysfs_kf_write+0x48/0x60 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x270/0x370 ksys_write+0x6c/0x100 __arm64_sys_write+0x20/0x30 invoke_syscall+0x4c/0x120 el0_svc_common.constprop.0+0x44/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x24/0x88 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x14c/0x15

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39866
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: fs: writeback: fix use-after-free in __mark_inode_dirty() An use-after-free issue occurred when __mark_inode_dirty() get the bdi_writeback that was in the progress of switching. CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1 ...... pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mark_inode_dirty+0x124/0x418 lr : __mark_inode_dirty+0x118/0x418 sp : ffffffc08c9dbbc0 ........ Call trace: __mark_inode_dirty+0x124/0x418 generic_update_time+0x4c/0x60 file_modified+0xcc/0xd0 ext4_buffered_write_iter+0x58/0x124 ext4_file_write_iter+0x54/0x704 vfs_write+0x1c0/0x308 ksys_write+0x74/0x10c __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x40/0xe4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x194/0x198 Root cause is: systemd-random-seed kworker ---------------------------------------------------------------------- ___mark_inode_dirty inode_switch_wbs_work_fn spin_lock(&inode->i_lock); inode_attach_wb locked_inode_to_wb_and_lock_list get inode->i_wb spin_unlock(&inode->i_lock); spin_lock(&wb->list_lock) spin_lock(&inode->i_lock) inode_io_list_move_locked spin_unlock(&wb->list_lock) spin_unlock(&inode->i_lock) spin_lock(&old_wb->list_lock) inode_do_switch_wbs spin_lock(&inode->i_lock) inode->i_wb = new_wb spin_unlock(&inode->i_lock) spin_unlock(&old_wb->list_lock) wb_put_many(old_wb, nr_switched) cgwb_release old wb released wb_wakeup_delayed() accesses wb, then trigger the use-after-free issue Fix this race condition by holding inode spinlock until wb_wakeup_delayed() finished.

Опубликовано: 2025-09-19Изменено: 2026-05-12
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39869
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: edma: Fix memory allocation size for queue_priority_map Fix a critical memory allocation bug in edma_setup_from_hw() where queue_priority_map was allocated with insufficient memory. The code declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8), but allocated memory using sizeof(s8) instead of the correct size. This caused out-of-bounds memory writes when accessing: queue_priority_map[i][0] = i; queue_priority_map[i][1] = i; The bug manifested as kernel crashes with "Oops - undefined instruction" on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the memory corruption triggered kernel hardening features on Clang. Change the allocation to use sizeof(*queue_priority_map) which automatically gets the correct size for the 2D array structure.

Опубликовано: 2025-09-23Изменено: 2026-01-20
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39870
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix double free in idxd_setup_wqs() The clean up in idxd_setup_wqs() has had a couple bugs because the error handling is a bit subtle. It's simpler to just re-write it in a cleaner way. The issues here are: 1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when "conf_dev" hasn't been initialized. 2) If kzalloc_node() fails then again "conf_dev" is invalid. It's either uninitialized or it points to the "conf_dev" from the previous iteration so it leads to a double free. It's better to free partial loop iterations within the loop and then the unwinding at the end can handle whole loop iterations. I also renamed the labels to describe what the goto does and not where the goto was located.

Опубликовано: 2025-09-23Изменено: 2026-01-20
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39871
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Remove improper idxd_free The call to idxd_free() introduces a duplicate put_device() leading to a reference count underflow: refcount_t: underflow; use-after-free. WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 ... Call Trace: idxd_remove+0xe4/0x120 [idxd] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x197/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x74/0xf0 pci_unregister_driver+0x2e/0xb0 idxd_exit_module+0x34/0x7a0 [idxd] __do_sys_delete_module.constprop.0+0x183/0x280 do_syscall_64+0x54/0xd70 entry_SYSCALL_64_after_hwframe+0x76/0x7e The idxd_unregister_devices() which is invoked at the very beginning of idxd_remove(), already takes care of the necessary put_device() through the following call path: idxd_unregister_devices() -> device_unregister() -> put_device() In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is called immediately after, it can result in a use-after-free. Remove the improper idxd_free() to avoid both the refcount underflow and potential memory corruption during module unload.

Опубликовано: 2025-09-23Изменено: 2026-01-11
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39873
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB can_put_echo_skb() takes ownership of the SKB and it may be freed during or after the call. However, xilinx_can xcan_write_frame() keeps using SKB after the call. Fix that by only calling can_put_echo_skb() after the code is done touching the SKB. The tx_lock is held for the entire xcan_write_frame() execution and also on the can_get_echo_skb() side so the order of operations does not matter. An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skb memory") did not move the can_put_echo_skb() call far enough. [mkl: add "commit" in front of sha1 in patch description] [mkl: fix indention]

Опубликовано: 2025-09-23Изменено: 2026-01-20
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39876
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable() The function of_phy_find_device may return NULL, so we need to take care before dereferencing phy_dev.

Опубликовано: 2025-09-23Изменено: 2026-01-20
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39877
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix use-after-free in state_show() state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock. This allows a use-after-free race: CPU 0 CPU 1 ----- ----- state_show() damon_sysfs_turn_damon_on() ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock); damon_destroy_ctx(kdamond->damon_ctx); kdamond->damon_ctx = NULL; mutex_unlock(&damon_sysfs_lock); damon_is_running(ctx); /* ctx is freed */ mutex_lock(&ctx->kdamond_lock); /* UAF */ (The race can also occur with damon_sysfs_kdamonds_rm_dirs() and damon_sysfs_kdamond_release(), which free or replace the context under damon_sysfs_lock.) Fix by taking damon_sysfs_lock before dereferencing the context, mirroring the locking used in pid_show(). The bug has existed since state_show() first accessed kdamond->damon_ctx.

Опубликовано: 2025-09-23Изменено: 2026-01-20
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39880
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: libceph: fix invalid accesses to ceph_connection_v1_info There is a place where generic code in messenger.c is reading and another place where it is writing to con->v1 union member without checking that the union member is active (i.e. msgr1 is in use). On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter, so such a read is almost guaranteed to return a bogus value instead of 0 when msgr2 is in use. This ends up being fairly benign because the side effect is just the invalidation of the authorizer and successive fetching of new tickets. con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that it's being written to can cause more serious consequences, but luckily it's not something that happens often.

Опубликовано: 2025-09-23Изменено: 2026-01-20
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39881
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: kernfs: Fix UAF in polling when open file is released A use-after-free (UAF) vulnerability was identified in the PSI (Pressure Stall Information) monitoring mechanism: BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140 Read of size 8 at addr ffff3de3d50bd308 by task systemd/1 psi_trigger_poll+0x3c/0x140 cgroup_pressure_poll+0x70/0xa0 cgroup_file_poll+0x8c/0x100 kernfs_fop_poll+0x11c/0x1c0 ep_item_poll.isra.0+0x188/0x2c0 Allocated by task 1: cgroup_file_open+0x88/0x388 kernfs_fop_open+0x73c/0xaf0 do_dentry_open+0x5fc/0x1200 vfs_open+0xa0/0x3f0 do_open+0x7e8/0xd08 path_openat+0x2fc/0x6b0 do_filp_open+0x174/0x368 Freed by task 8462: cgroup_file_release+0x130/0x1f8 kernfs_drain_open_files+0x17c/0x440 kernfs_drain+0x2dc/0x360 kernfs_show+0x1b8/0x288 cgroup_file_show+0x150/0x268 cgroup_pressure_write+0x1dc/0x340 cgroup_file_write+0x274/0x548 Reproduction Steps: 1. Open test/cpu.pressure and establish epoll monitoring 2. Disable monitoring: echo 0 > test/cgroup.pressure 3. Re-enable monitoring: echo 1 > test/cgroup.pressure The race condition occurs because: 1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it: - Releases PSI triggers via cgroup_file_release() - Frees of->priv through kernfs_drain_open_files() 2. While epoll still holds reference to the file and continues polling 3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv epolling disable/enable cgroup.pressure fd=open(cpu.pressure) while(1) ... epoll_wait kernfs_fop_poll kernfs_get_active = true echo 0 > cgroup.pressure ... cgroup_file_show kernfs_show // inactive kn kernfs_drain_open_files cft->release(of); kfree(ctx); ... kernfs_get_active = false echo 1 > cgroup.pressure kernfs_show kernfs_activate_one(kn); kernfs_fop_poll kernfs_get_active = true cgroup_file_poll psi_trigger_poll // UAF ... end: close(fd) To address this issue, introduce kernfs_get_active_of() for kernfs open files to obtain active references. This function will fail if the open file has been released. Replace kernfs_get_active() with kernfs_get_active_of() to prevent further operations on released file descriptors.

Опубликовано: 2025-09-23Изменено: 2026-01-16
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39882
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: fix potential OF node use-after-free The for_each_child_of_node() helper drops the reference it takes to each node as it iterates over children and an explicit of_node_put() is only needed when exiting the loop early. Drop the recently introduced bogus additional reference count decrement at each iteration that could potentially lead to a use-after-free.

Опубликовано: 2025-09-23Изменено: 2026-01-14
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39883
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug.

Опубликовано: 2025-09-23Изменено: 2026-01-16
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39884
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix subvolume deletion lockup caused by inodes xarray race There is a race condition between inode eviction and inode caching that can cause a live struct btrfs_inode to be missing from the root->inodes xarray. Specifically, there is a window during evict() between the inode being unhashed and deleted from the xarray. If btrfs_iget() is called for the same inode in that window, it will be recreated and inserted into the xarray, but then eviction will delete the new entry, leaving nothing in the xarray: Thread 1 Thread 2 --------------------------------------------------------------- evict() remove_inode_hash() btrfs_iget_path() btrfs_iget_locked() btrfs_read_locked_inode() btrfs_add_inode_to_root() destroy_inode() btrfs_destroy_inode() btrfs_del_inode_from_root() __xa_erase In turn, this can cause issues for subvolume deletion. Specifically, if an inode is in this lost state, and all other inodes are evicted, then btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely. If the lost inode has a delayed_node attached to it, then when btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(), it will loop forever because the delayed_nodes xarray will never become empty (unless memory pressure forces the inode out). We saw this manifest as soft lockups in production. Fix it by only deleting the xarray entry if it matches the given inode (using __xa_cmpxchg()).

Опубликовано: 2025-09-23Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39885
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix recursive semaphore deadlock in fiemap call syzbot detected a OCFS2 hang due to a recursive semaphore on a FS_IOC_FIEMAP of the extent list on a specially crafted mmap file. context_switch kernel/sched/core.c:5357 [inline] __schedule+0x1798/0x4cc0 kernel/sched/core.c:6961 __schedule_loop kernel/sched/core.c:7043 [inline] schedule+0x165/0x360 kernel/sched/core.c:7058 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7115 rwsem_down_write_slowpath+0x872/0xfe0 kernel/locking/rwsem.c:1185 __down_write_common kernel/locking/rwsem.c:1317 [inline] __down_write kernel/locking/rwsem.c:1326 [inline] down_write+0x1ab/0x1f0 kernel/locking/rwsem.c:1591 ocfs2_page_mkwrite+0x2ff/0xc40 fs/ocfs2/mmap.c:142 do_page_mkwrite+0x14d/0x310 mm/memory.c:3361 wp_page_shared mm/memory.c:3762 [inline] do_wp_page+0x268d/0x5800 mm/memory.c:3981 handle_pte_fault mm/memory.c:6068 [inline] __handle_mm_fault+0x1033/0x5440 mm/memory.c:6195 handle_mm_fault+0x40a/0x8e0 mm/memory.c:6364 do_user_addr_fault+0x764/0x1390 arch/x86/mm/fault.c:1387 handle_page_fault arch/x86/mm/fault.c:1476 [inline] exc_page_fault+0x76/0xf0 arch/x86/mm/fault.c:1532 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623 RIP: 0010:copy_user_generic arch/x86/include/asm/uaccess_64.h:126 [inline] RIP: 0010:raw_copy_to_user arch/x86/include/asm/uaccess_64.h:147 [inline] RIP: 0010:_inline_copy_to_user include/linux/uaccess.h:197 [inline] RIP: 0010:_copy_to_user+0x85/0xb0 lib/usercopy.c:26 Code: e8 00 bc f7 fc 4d 39 fc 72 3d 4d 39 ec 77 38 e8 91 b9 f7 fc 4c 89 f7 89 de e8 47 25 5b fd 0f 01 cb 4c 89 ff 48 89 d9 4c 89 f6 a4 0f 1f 00 48 89 cb 0f 01 ca 48 89 d8 5b 41 5c 41 5d 41 5e 41 RSP: 0018:ffffc9000403f950 EFLAGS: 00050256 RAX: ffffffff84c7f101 RBX: 0000000000000038 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffffc9000403f9e0 RDI: 0000200000000060 RBP: ffffc9000403fa90 R08: ffffc9000403fa17 R09: 1ffff92000807f42 R10: dffffc0000000000 R11: fffff52000807f43 R12: 0000200000000098 R13: 00007ffffffff000 R14: ffffc9000403f9e0 R15: 0000200000000060 copy_to_user include/linux/uaccess.h:225 [inline] fiemap_fill_next_extent+0x1c0/0x390 fs/ioctl.c:145 ocfs2_fiemap+0x888/0xc90 fs/ocfs2/extent_map.c:806 ioctl_fiemap fs/ioctl.c:220 [inline] do_vfs_ioctl+0x1173/0x1430 fs/ioctl.c:532 __do_sys_ioctl fs/ioctl.c:596 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f13850fd9 RSP: 002b:00007ffe3b3518b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f5f13850fd9 RDX: 0000200000000040 RSI: 00000000c020660b RDI: 0000000000000004 RBP: 6165627472616568 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe3b3518f0 R13: 00007ffe3b351b18 R14: 431bde82d7b634db R15: 00007f5f1389a03b ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the extent list of this running mmap executable. The user supplied buffer to hold the fiemap information page faults calling ocfs2_page_mkwrite() which will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same semaphore. This recursive semaphore will hold filesystem locks and causes a hang of the fileystem. The ip_alloc_sem protects the inode extent list and size. Release the read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap() and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock on the last extent but simplifies the error path.

Опубликовано: 2025-09-23Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39886
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init() Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can cause various locking issues; see the following stack trace (edited for style) as one example: ... [10.011566] do_raw_spin_lock.cold [10.011570] try_to_wake_up (5) double-acquiring the same [10.011575] kick_pool rq_lock, causing a hardlockup [10.011579] __queue_work [10.011582] queue_work_on [10.011585] kernfs_notify [10.011589] cgroup_file_notify [10.011593] try_charge_memcg (4) memcg accounting raises an [10.011597] obj_cgroup_charge_pages MEMCG_MAX event [10.011599] obj_cgroup_charge_account [10.011600] __memcg_slab_post_alloc_hook [10.011603] __kmalloc_node_noprof ... [10.011611] bpf_map_kmalloc_node [10.011612] __bpf_async_init [10.011615] bpf_timer_init (3) BPF calls bpf_timer_init() [10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable [10.011619] bpf__sched_ext_ops_runnable [10.011620] enqueue_task_scx (2) BPF runs with rq_lock held [10.011622] enqueue_task [10.011626] ttwu_do_activate [10.011629] sched_ttwu_pending (1) grabs rq_lock ... The above was reproduced on bpf-next (b338cf849ec8) by modifying ./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during ops.runnable(), and hacking the memcg accounting code a bit to make a bpf_timer_init() call more likely to raise an MEMCG_MAX event. We have also run into other similar variants (both internally and on bpf-next), including double-acquiring cgroup_file_kn_lock, the same worker_pool::lock, etc. As suggested by Shakeel, fix this by using __GFP_HIGH instead of GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg() raises an MEMCG_MAX event, we call __memcg_memory_event() with @allow_spinning=false and avoid calling cgroup_file_notify() there. Depends on mm patch "memcg: skip cgroup_file_notify if spinning is not allowed": https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/ v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/ https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/ v1 approach: https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/

Опубликовано: 2025-09-23Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39891
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Initialize the chan_stats array to zero The adapter->chan_stats[] array is initialized in mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out memory. The array is filled in mwifiex_update_chan_statistics() and then the user can query the data in mwifiex_cfg80211_dump_survey(). There are two potential issues here. What if the user calls mwifiex_cfg80211_dump_survey() before the data has been filled in. Also the mwifiex_update_chan_statistics() function doesn't necessarily initialize the whole array. Since the array was not initialized at the start that could result in an information leak. Also this array is pretty small. It's a maximum of 900 bytes so it's more appropriate to use kcalloc() instead vmalloc().

Опубликовано: 2025-10-01Изменено: 2026-01-22
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39894
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm When send a broadcast packet to a tap device, which was added to a bridge, br_nf_local_in() is called to confirm the conntrack. If another conntrack with the same hash value is added to the hash table, which can be triggered by a normal packet to a non-bridge device, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200 CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary) RIP: 0010:br_nf_local_in+0x168/0x200 Call Trace: nf_hook_slow+0x3e/0xf0 br_pass_frame_up+0x103/0x180 br_handle_frame_finish+0x2de/0x5b0 br_nf_hook_thresh+0xc0/0x120 br_nf_pre_routing_finish+0x168/0x3a0 br_nf_pre_routing+0x237/0x5e0 br_handle_frame+0x1ec/0x3c0 __netif_receive_skb_core+0x225/0x1210 __netif_receive_skb_one_core+0x37/0xa0 netif_receive_skb+0x36/0x160 tun_get_user+0xa54/0x10c0 tun_chr_write_iter+0x65/0xb0 vfs_write+0x305/0x410 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f ---[ end trace 0000000000000000 ]--- To solve the hash conflict, nf_ct_resolve_clash() try to merge the conntracks, and update skb->_nfct. However, br_nf_local_in() still use the old ct from local variable 'nfct' after confirm(), which leads to this warning. If confirm() does not insert the conntrack entry and return NF_DROP, the warning may also occur. There is no need to reserve the WARN_ON_ONCE, just remove it.

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39895
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: sched: Fix sched_numa_find_nth_cpu() if mask offline sched_numa_find_nth_cpu() uses a bsearch to look for the 'closest' CPU in sched_domains_numa_masks and given cpus mask. However they might not intersect if all CPUs in the cpus mask are offline. bsearch will return NULL in that case, bail out instead of dereferencing a bogus pointer. The previous behaviour lead to this bug when using maxcpus=4 on an rk3399 (LLLLbb) (i.e. booting with all big CPUs offline): [ 1.422922] Unable to handle kernel paging request at virtual address ffffff8000000000 [ 1.423635] Mem abort info: [ 1.423889] ESR = 0x0000000096000006 [ 1.424227] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.424715] SET = 0, FnV = 0 [ 1.424995] EA = 0, S1PTW = 0 [ 1.425279] FSC = 0x06: level 2 translation fault [ 1.425735] Data abort info: [ 1.425998] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 1.426499] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1.426952] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1.427428] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000004a9f000 [ 1.428038] [ffffff8000000000] pgd=18000000f7fff403, p4d=18000000f7fff403, pud=18000000f7fff403, pmd=0000000000000000 [ 1.429014] Internal error: Oops: 0000000096000006 [#1] SMP [ 1.429525] Modules linked in: [ 1.429813] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc4-dirty #343 PREEMPT [ 1.430559] Hardware name: Pine64 RockPro64 v2.1 (DT) [ 1.431012] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.431634] pc : sched_numa_find_nth_cpu+0x2a0/0x488 [ 1.432094] lr : sched_numa_find_nth_cpu+0x284/0x488 [ 1.432543] sp : ffffffc084e1b960 [ 1.432843] x29: ffffffc084e1b960 x28: ffffff80078a8800 x27: ffffffc0846eb1d0 [ 1.433495] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 1.434144] x23: 0000000000000000 x22: fffffffffff7f093 x21: ffffffc081de6378 [ 1.434792] x20: 0000000000000000 x19: 0000000ffff7f093 x18: 00000000ffffffff [ 1.435441] x17: 3030303866666666 x16: 66663d736b73616d x15: ffffffc104e1b5b7 [ 1.436091] x14: 0000000000000000 x13: ffffffc084712860 x12: 0000000000000372 [ 1.436739] x11: 0000000000000126 x10: ffffffc08476a860 x9 : ffffffc084712860 [ 1.437389] x8 : 00000000ffffefff x7 : ffffffc08476a860 x6 : 0000000000000000 [ 1.438036] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 1.438683] x2 : 0000000000000000 x1 : ffffffc0846eb000 x0 : ffffff8000407b68 [ 1.439332] Call trace: [ 1.439559] sched_numa_find_nth_cpu+0x2a0/0x488 (P) [ 1.440016] smp_call_function_any+0xc8/0xd0 [ 1.440416] armv8_pmu_init+0x58/0x27c [ 1.440770] armv8_cortex_a72_pmu_init+0x20/0x2c [ 1.441199] arm_pmu_device_probe+0x1e4/0x5e8 [ 1.441603] armv8_pmu_device_probe+0x1c/0x28 [ 1.442007] platform_probe+0x5c/0xac [ 1.442347] really_probe+0xbc/0x298 [ 1.442683] __driver_probe_device+0x78/0x12c [ 1.443087] driver_probe_device+0xdc/0x160 [ 1.443475] __driver_attach+0x94/0x19c [ 1.443833] bus_for_each_dev+0x74/0xd4 [ 1.444190] driver_attach+0x24/0x30 [ 1.444525] bus_add_driver+0xe4/0x208 [ 1.444874] driver_register+0x60/0x128 [ 1.445233] __platform_driver_register+0x24/0x30 [ 1.445662] armv8_pmu_driver_init+0x28/0x4c [ 1.446059] do_one_initcall+0x44/0x25c [ 1.446416] kernel_init_freeable+0x1dc/0x3bc [ 1.446820] kernel_init+0x20/0x1d8 [ 1.447151] ret_from_fork+0x10/0x20 [ 1.447493] Code: 90022e21 f000e5f5 910de2b5 2a1703e2 (f8767803) [ 1.448040] ---[ end trace 0000000000000000 ]--- [ 1.448483] note: swapper/0[1] exited with preempt_count 1 [ 1.449047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.449741] SMP: stopping secondary CPUs [ 1.450105] Kernel Offset: disabled [ 1.450419] CPU features: 0x000000,00080000,20002001,0400421b [ ---truncated---

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39896
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Prevent recovery work from being queued during device removal Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini() to ensure that no new recovery work items can be queued after device removal has started. Previously, recovery work could be scheduled even after canceling existing work, potentially leading to use-after-free bugs if recovery accessed freed resources. Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better reflect its new behavior.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39897
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Add error handling for RX metadata pointer retrieval Add proper error checking for dmaengine_desc_get_metadata_ptr() which can return an error pointer and lead to potential crashes or undefined behaviour if the pointer retrieval fails. Properly handle the error by unmapping DMA buffer, freeing the skb and returning early to prevent further processing with invalid data.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39899
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using kmap_local_page(), which requires unmapping in Last-In-First-Out order. The current code maps dst_pte first, then src_pte, but unmaps them in the same order (dst_pte, src_pte), violating the LIFO requirement. This causes the warning in kunmap_local_indexed(): WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx) Fix this by reversing the unmap order to respect LIFO ordering. This issue follows the same pattern as similar fixes: - commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order") - commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename") Both of which addressed the same fundamental requirement that kmap_local operations must follow LIFO ordering.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39900
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net_sched: gen_estimator: fix est_timer() vs CONFIG_PREEMPT_RT=y syzbot reported a WARNING in est_timer() [1] Problem here is that with CONFIG_PREEMPT_RT=y, timer callbacks can be preempted. Adopt preempt_disable_nested()/preempt_enable_nested() to fix this. [1] WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline] WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline] RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93 Call Trace: call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747 expire_timers kernel/time/timer.c:1798 [inline] __run_timers kernel/time/timer.c:2372 [inline] __run_timer_base+0x648/0x970 kernel/time/timer.c:2384 run_timer_base kernel/time/timer.c:2393 [inline] run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403 handle_softirqs+0x22c/0x710 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] run_ktimerd+0xcf/0x190 kernel/softirq.c:1043 smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160 kthread+0x70e/0x8a0 kernel/kthread.c:463 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39901
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be ": ". For 'netdev_ops', this will be ": ". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39902
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid accessing metadata when pointer is invalid in object_err() object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object. One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process. In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata.

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39903
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: of_numa: fix uninitialized memory nodes causing kernel panic When there are memory-only nodes (nodes without CPUs), these nodes are not properly initialized, causing kernel panic during boot. of_numa_init of_numa_parse_cpu_nodes node_set(nid, numa_nodes_parsed); of_numa_parse_memory_nodes In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes containing CPUs. Memory-only nodes should have been updated in of_numa_parse_memory_nodes, but they weren't. Subsequently, when free_area_init() attempts to access NODE_DATA() for these uninitialized memory nodes, the kernel panics due to NULL pointer dereference. This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes: qemu-system-aarch64 \ -cpu host -nographic \ -m 4G -smp 1 \ -machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \ -object memory-backend-ram,size=2G,id=mem0 \ -object memory-backend-ram,size=2G,id=mem1 \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -kernel $IMAGE \ -hda $DISK \ -append "console=ttyAMA0 root=/dev/vda rw earlycon" [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010] [ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff] [ 0.000000] node 1 must be removed before remove section 23 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 0.000000] Mem abort info: [ 0.000000] ESR = 0x0000000096000004 [ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] FSC = 0x04: level 0 translation fault [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.000000] [00000000000000a0] user address but active_mm is swapper [ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT [ 0.000000] Hardware name: linux,dummy-virt (DT) [ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : free_area_init+0x50c/0xf9c [ 0.000000] lr : free_area_init+0x5c0/0xf9c [ 0.000000] sp : ffffa02ca0f33c00 [ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000 [ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000 [ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368 [ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002 [ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001 [ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002 [ 0.0 ---truncated---

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39907
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: stm32_fmc2: avoid overlapping mappings on ECC buffer Avoid below overlapping mappings by using a contiguous non-cacheable buffer. [ 4.077708] DMA-API: stm32_fmc2_nfc 48810000.nand-controller: cacheline tracking EEXIST, overlapping mappings aren't supported [ 4.089103] WARNING: CPU: 1 PID: 44 at kernel/dma/debug.c:568 add_dma_entry+0x23c/0x300 [ 4.097071] Modules linked in: [ 4.100101] CPU: 1 PID: 44 Comm: kworker/u4:2 Not tainted 6.1.82 #1 [ 4.106346] Hardware name: STMicroelectronics STM32MP257F VALID1 SNOR / MB1704 (LPDDR4 Power discrete) + MB1703 + MB1708 (SNOR MB1730) (DT) [ 4.118824] Workqueue: events_unbound deferred_probe_work_func [ 4.124674] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.131624] pc : add_dma_entry+0x23c/0x300 [ 4.135658] lr : add_dma_entry+0x23c/0x300 [ 4.139792] sp : ffff800009dbb490 [ 4.143016] x29: ffff800009dbb4a0 x28: 0000000004008022 x27: ffff8000098a6000 [ 4.150174] x26: 0000000000000000 x25: ffff8000099e7000 x24: ffff8000099e7de8 [ 4.157231] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff8000098a6a20 [ 4.164388] x20: ffff000080964180 x19: ffff800009819ba0 x18: 0000000000000006 [ 4.171545] x17: 6361727420656e69 x16: 6c6568636163203a x15: 72656c6c6f72746e [ 4.178602] x14: 6f632d646e616e2e x13: ffff800009832f58 x12: 00000000000004ec [ 4.185759] x11: 00000000000001a4 x10: ffff80000988af58 x9 : ffff800009832f58 [ 4.192916] x8 : 00000000ffffefff x7 : ffff80000988af58 x6 : 80000000fffff000 [ 4.199972] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 4.207128] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000812d2c40 [ 4.214185] Call trace: [ 4.216605] add_dma_entry+0x23c/0x300 [ 4.220338] debug_dma_map_sg+0x198/0x350 [ 4.224373] __dma_map_sg_attrs+0xa0/0x110 [ 4.228411] dma_map_sg_attrs+0x10/0x2c [ 4.232247] stm32_fmc2_nfc_xfer.isra.0+0x1c8/0x3fc [ 4.237088] stm32_fmc2_nfc_seq_read_page+0xc8/0x174 [ 4.242127] nand_read_oob+0x1d4/0x8e0 [ 4.245861] mtd_read_oob_std+0x58/0x84 [ 4.249596] mtd_read_oob+0x90/0x150 [ 4.253231] mtd_read+0x68/0xac

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39909
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked.

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39911
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration later than the first, the error path wants to free the IRQs requested so far. However, it uses the wrong dev_id argument for free_irq(), so it does not free the IRQs correctly and instead triggers the warning: Trying to free already-free IRQ 173 WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0 Modules linked in: i40e(+) [...] CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:__free_irq+0x192/0x2c0 [...] Call Trace: free_irq+0x32/0x70 i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e] i40e_vsi_request_irq+0x79/0x80 [i40e] i40e_vsi_open+0x21f/0x2f0 [i40e] i40e_open+0x63/0x130 [i40e] __dev_open+0xfc/0x210 __dev_change_flags+0x1fc/0x240 netif_change_flags+0x27/0x70 do_setlink.isra.0+0x341/0xc70 rtnl_newlink+0x468/0x860 rtnetlink_rcv_msg+0x375/0x450 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x288/0x3c0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x3a2/0x3d0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x82/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] ---[ end trace 0000000000000000 ]--- Use the same dev_id for free_irq() as for request_irq(). I tested this with inserting code to fail intentionally.

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39912
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfs/localio: restore creds before releasing pageio data Otherwise if the nfsd filecache code releases the nfsd_file immediately, it can trigger the BUG_ON(cred == current->cred) in __put_cred() when it puts the nfsd_file->nf_file->f-cred.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39913
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork. syzbot reported the splat below. [0] The repro does the following: 1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes) 2. Attach the prog to a SOCKMAP 3. Add a socket to the SOCKMAP 4. Activate fault injection 5. Send data less than cork_bytes At 5., the data is carried over to the next sendmsg() as it is smaller than the cork_bytes specified by bpf_msg_cork_bytes(). Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold the data, but this fails silently due to fault injection + __GFP_NOWARN. If the allocation fails, we need to revert the sk->sk_forward_alloc change done by sk_msg_alloc(). Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate psock->cork. The "*copied" also needs to be updated such that a proper error can be returned to the caller, sendmsg. It fails to allocate psock->cork. Nothing has been corked so far, so this patch simply sets "*copied" to 0. [0]: WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983 Modules linked in: CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156 Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246 RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80 RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000 RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4 R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380 R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872 FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0 Call Trace: __sk_destruct+0x86/0x660 net/core/sock.c:2339 rcu_do_batch kernel/rcu/tree.c:2605 [inline] rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861 handle_softirqs+0x286/0x870 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] invoke_softirq kernel/softirq.c:453 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39914
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tracing: Silence warning when chunk allocation fails in trace_pid_write Syzkaller trigger a fault injection warning: WARNING: CPU: 1 PID: 12326 at tracepoint_add_func+0xbfc/0xeb0 Modules linked in: CPU: 1 UID: 0 PID: 12326 Comm: syz.6.10325 Tainted: G U 6.14.0-rc5-syzkaller #0 Tainted: [U]=USER Hardware name: Google Compute Engine/Google Compute Engine RIP: 0010:tracepoint_add_func+0xbfc/0xeb0 kernel/tracepoint.c:294 Code: 09 fe ff 90 0f 0b 90 0f b6 74 24 43 31 ff 41 bc ea ff ff ff RSP: 0018:ffffc9000414fb48 EFLAGS: 00010283 RAX: 00000000000012a1 RBX: ffffffff8e240ae0 RCX: ffffc90014b78000 RDX: 0000000000080000 RSI: ffffffff81bbd78b RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffffffffef R13: 0000000000000000 R14: dffffc0000000000 R15: ffffffff81c264f0 FS: 00007f27217f66c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e80dff8 CR3: 00000000268f8000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tracepoint_probe_register_prio+0xc0/0x110 kernel/tracepoint.c:464 register_trace_prio_sched_switch include/trace/events/sched.h:222 [inline] register_pid_events kernel/trace/trace_events.c:2354 [inline] event_pid_write.isra.0+0x439/0x7a0 kernel/trace/trace_events.c:2425 vfs_write+0x24c/0x1150 fs/read_write.c:677 ksys_write+0x12b/0x250 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f We can reproduce the warning by following the steps below: 1. echo 8 >> set_event_notrace_pid. Let tr->filtered_pids owns one pid and register sched_switch tracepoint. 2. echo ' ' >> set_event_pid, and perform fault injection during chunk allocation of trace_pid_list_alloc. Let pid_list with no pid and assign to tr->filtered_pids. 3. echo ' ' >> set_event_pid. Let pid_list is NULL and assign to tr->filtered_pids. 4. echo 9 >> set_event_pid, will trigger the double register sched_switch tracepoint warning. The reason is that syzkaller injects a fault into the chunk allocation in trace_pid_list_alloc, causing a failure in trace_pid_list_set, which may trigger double register of the same tracepoint. This only occurs when the system is about to crash, but to suppress this warning, let's add failure handling logic to trace_pid_list_set.

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39916
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters() When creating a new scheme of DAMON_RECLAIM, the calculation of 'min_age_region' uses 'aggr_interval' as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs.

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39917
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt Stanislav reported that in bpf_crypto_crypt() the destination dynptr's size is not validated to be at least as large as the source dynptr's size before calling into the crypto backend with 'len = src_len'. This can result in an OOB write when the destination is smaller than the source. Concretely, in mentioned function, psrc and pdst are both linear buffers fetched from each dynptr: psrc = __bpf_dynptr_data(src, src_len); [...] pdst = __bpf_dynptr_data_rw(dst, dst_len); [...] err = decrypt ? ctx->type->decrypt(ctx->tfm, psrc, pdst, src_len, piv) : ctx->type->encrypt(ctx->tfm, psrc, pdst, src_len, piv); The crypto backend expects pdst to be large enough with a src_len length that can be written. Add an additional src_len > dst_len check and bail out if it's the case. Note that these kfuncs are accessible under root privileges only.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39918
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix linked list corruption Never leave scheduled wcid entries on the temporary on-stack list

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39920
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Add error handling for add_interval() in do_validate_mem() In the do_validate_mem(), the call to add_interval() does not handle errors. If kmalloc() fails in add_interval(), it could result in a null pointer being inserted into the linked list, leading to illegal memory access when sub_interval() is called next. This patch adds an error handling for the add_interval(). If add_interval() returns an error, the function will return early with the error code.

Опубликовано: 2025-10-01Изменено: 2026-01-16
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39922
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix incorrect map used in eee linkmode incorrectly used ixgbe_lp_map in loops intended to populate the supported and advertised EEE linkmode bitmaps based on ixgbe_ls_map. This results in incorrect bit setting and potential out-of-bounds access, since ixgbe_lp_map and ixgbe_ls_map have different sizes and purposes. ixgbe_lp_map[i] -> ixgbe_ls_map[i] Use ixgbe_ls_map for supported and advertised linkmodes, and keep ixgbe_lp_map usage only for link partner (lp_advertised) mapping.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39923
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/ [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/

Опубликовано: 2025-10-01Изменено: 2026-01-20
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39926
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: genetlink: fix genl_bind() invoking bind() after -EPERM Per family bind/unbind callbacks were introduced to allow families to track multicast group consumer presence, e.g. to start or stop producing events depending on listeners. However, in genl_bind() the bind() callback was invoked even if capability checks failed and ret was set to -EPERM. This means that callbacks could run on behalf of unauthorized callers while the syscall still returned failure to user space. Fix this by only invoking bind() after "if (ret) break;" check i.e. after permission checks have succeeded.

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39927
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: ceph: fix race condition validating r_parent before applying state Add validation to ensure the cached parent directory inode matches the directory info in MDS replies. This prevents client-side race conditions where concurrent operations (e.g. rename) cause r_parent to become stale between request initiation and reply processing, which could lead to applying state changes to incorrect directory inodes. [ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ]

Опубликовано: 2025-10-01Изменено: 2026-01-14
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39929
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown()

Опубликовано: 2025-10-04Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39931
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop.

Опубликовано: 2025-10-04Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39932
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: client: let smbd_destroy() call disable_work_sync(&info->post_send_credits_work) In smbd_destroy() we may destroy the memory so we better wait until post_send_credits_work is no longer pending and will never be started again. I actually just hit the case using rxe: WARNING: CPU: 0 PID: 138 at drivers/infiniband/sw/rxe/rxe_verbs.c:1032 rxe_post_recv+0x1ee/0x480 [rdma_rxe] ... [ 5305.686979] [ T138] smbd_post_recv+0x445/0xc10 [cifs] [ 5305.687135] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687149] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687185] [ T138] ? __pfx_smbd_post_recv+0x10/0x10 [cifs] [ 5305.687329] [ T138] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 5305.687356] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687368] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687378] [ T138] ? _raw_spin_unlock_irqrestore+0x11/0x60 [ 5305.687389] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687399] [ T138] ? get_receive_buffer+0x168/0x210 [cifs] [ 5305.687555] [ T138] smbd_post_send_credits+0x382/0x4b0 [cifs] [ 5305.687701] [ T138] ? __pfx_smbd_post_send_credits+0x10/0x10 [cifs] [ 5305.687855] [ T138] ? __pfx___schedule+0x10/0x10 [ 5305.687865] [ T138] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 5305.687875] [ T138] ? queue_delayed_work_on+0x8e/0xa0 [ 5305.687889] [ T138] process_one_work+0x629/0xf80 [ 5305.687908] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687917] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687933] [ T138] worker_thread+0x87f/0x1570 ... It means rxe_post_recv was called after rdma_destroy_qp(). This happened because put_receive_buffer() was triggered by ib_drain_qp() and called: queue_work(info->workqueue, &info->post_send_credits_work);

Опубликовано: 2025-10-04Изменено: 2026-03-24
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39934
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference.

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39937
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored

Опубликовано: 2025-10-04Изменено: 2026-03-24
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39938
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm-lpass-dais: Fix NULL pointer dereference if source graph failed If earlier opening of source graph fails (e.g. ADSP rejects due to incorrect audioreach topology), the graph is closed and "dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink graph continues though and next call to q6apm_lpass_dai_prepare() receives dai_data->graph[dai->id]=NULL leading to NULL pointer exception: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 ... Call trace: q6apm_graph_media_format_pcm+0x48/0x120 (P) q6apm_lpass_dai_prepare+0x110/0x1b4 snd_soc_pcm_dai_prepare+0x74/0x108 __soc_pcm_prepare+0x44/0x160 dpcm_be_dai_prepare+0x124/0x1c0

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39940
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm-stripe: fix a possible integer overflow There's a possible integer overflow in stripe_io_hints if we have too large chunk size. Test if the overflow happened, and if it did, don't set limits->io_min and limits->io_opt;

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39942
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size This is inspired by the check for data_offset + data_length.

Опубликовано: 2025-10-04Изменено: 2026-03-24
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39943
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: validate data_offset and data_length field of smb_direct_data_transfer If data_offset and data_length of smb_direct_data_transfer struct are invalid, out of bounds issue could happen. This patch validate data_offset and data_length field in recv_done.

Опубликовано: 2025-10-04Изменено: 2026-04-06
CVSS 3.xВЫСОКАЯ 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
Ссылки
CVE-2025-39944
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp() The original code relies on cancel_delayed_work() in otx2_ptp_destroy(), which does not ensure that the delayed work item synctstamp_work has fully completed if it was already running. This leads to use-after-free scenarios where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp(). Furthermore, the synctstamp_work is cyclic, the likelihood of triggering the bug is nonnegligible. A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) otx2_remove() | otx2_ptp_destroy() | otx2_sync_tstamp() cancel_delayed_work() | kfree(ptp) | | ptp = container_of(...); //UAF | ptp-> //UAF This is confirmed by a KASAN report: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800aa09a18 by task bash/136 ... Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 otx2_ptp_init+0xb1/0x860 otx2_probe+0x4eb/0xc30 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 136: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 otx2_ptp_destroy+0x38/0x80 otx2_remove+0x10d/0x4c0 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled before the otx2_ptp is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced artificial delays within the otx2_sync_tstamp() function to increase the likelihood of triggering the bug.

Опубликовано: 2025-10-04Изменено: 2026-04-06
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39945
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: cnic: Fix use-after-free bugs in cnic_delete_task The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after the cyclic work items have finished executing, a delayed work item may still exist in the workqueue. This leads to use-after-free scenarios where the cnic_dev is deallocated by cnic_free_dev(), while delete_task remains active and attempt to dereference cnic_dev in cnic_delete_task(). A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //use Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the cyclic delayed work item is properly canceled and that any ongoing execution of the work item completes before the cnic_dev is deallocated. Furthermore, since cancel_delayed_work_sync() uses __flush_work(work, true) to synchronously wait for any currently executing instance of the work item to finish, the flush_workqueue() becomes redundant and should be removed. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated the cnic PCI device in QEMU and introduced intentional delays — such as inserting calls to ssleep() within the cnic_delete_task() function — to increase the likelihood of triggering the bug.

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39946
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tls: make sure to abort the stream if headers are bogus Normally we wait for the socket to buffer up the whole record before we service it. If the socket has a tiny buffer, however, we read out the data sooner, to prevent connection stalls. Make sure that we abort the connection when we find out late that the record is actually invalid. Retrying the parsing is fine in itself but since we copy some more data each time before we parse we can overflow the allocated skb space. Constructing a scenario in which we're under pressure without enough data in the socket to parse the length upfront is quite hard. syzbot figured out a way to do this by serving us the header in small OOB sends, and then filling in the recvbuf with a large normal send. Make sure that tls_rx_msg_size() aborts strp, if we reach an invalid record there's really no way to recover.

Опубликовано: 2025-10-04Изменено: 2026-04-06
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39947
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Harden uplink netdev access against device unbind The function mlx5_uplink_netdev_get() gets the uplink netdevice pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can be removed and its pointer cleared when unbound from the mlx5_core.eth driver. This results in a NULL pointer, causing a kernel panic. BUG: unable to handle page fault for address: 0000000000001300 at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core] Call Trace: mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core] esw_offloads_enable+0x593/0x910 [mlx5_core] mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xd0 genl_family_rcv_msg_doit+0xe0/0x130 genl_rcv_msg+0x183/0x290 netlink_rcv_skb+0x4b/0xf0 genl_rcv+0x24/0x40 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 __sys_sendto+0x119/0x180 do_syscall_64+0x53/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Ensure the pointer is valid before use by checking it for NULL. If it is valid, immediately call netdev_hold() to take a reference, and preventing the netdevice from being freed while it is in use.

Опубликовано: 2025-10-04Изменено: 2026-04-06
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39948
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ice: fix Rx page leak on multi-buffer frames The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each buffer in the current frame. This function was introduced as part of handling multi-buffer XDP support in the ice driver. It works by iterating over the buffers from first_desc up to 1 plus the total number of fragments in the frame, cached from before the XDP program was executed. If the hardware posts a descriptor with a size of 0, the logic used in ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't call ice_put_rx_buf(). Because we don't call ice_put_rx_buf(), we don't attempt to re-use the page or free it. This leaves a stale page in the ring, as we don't increment next_to_alloc. The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented properly, and that it always points to a buffer with a NULL page. Since this function doesn't check, it will happily recycle a page over the top of the next_to_alloc buffer, losing track of the old page. Note that this leak only occurs for multi-buffer frames. The ice_put_rx_mbuf() function always handles at least one buffer, so a single-buffer frame will always get handled correctly. It is not clear precisely why the hardware hands us descriptors with a size of 0 sometimes, but it happens somewhat regularly with "jumbo frames" used by 9K MTU. To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on all buffers between first_desc and next_to_clean. Borrow the logic of a similar function in i40e used for this same purpose. Use the same logic also in ice_get_pgcnts(). Instead of iterating over just the number of fragments, use a loop which iterates until the current index reaches to the next_to_clean element just past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does call ice_put_rx_buf() on the last buffer of the frame indicating the end of packet. For non-linear (multi-buffer) frames, we need to take care when adjusting the pagecnt_bias. An XDP program might release fragments from the tail of the frame, in which case that fragment page is already released. Only update the pagecnt_bias for the first descriptor and fragments still remaining post-XDP program. Take care to only access the shared info for fragmented buffers, as this avoids a significant cache miss. The xdp_xmit value only needs to be updated if an XDP program is run, and only once per packet. Drop the xdp_xmit pointer argument from ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function directly. This avoids needing to pass the argument and avoids an extra bit-wise OR for each buffer in the frame. Move the increment of the ntc local variable to ensure its updated *before* all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic requires the index of the element just after the current frame. Now that we use an index pointer in the ring to identify the packet, we no longer need to track or cache the number of fragments in the rx_ring.

Опубликовано: 2025-10-04Изменено: 2026-03-24
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39949
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: qed: Don't collect too many protection override GRC elements In the protection override dump path, the firmware can return far too many GRC elements, resulting in attempting to write past the end of the previously-kmalloc'ed dump buffer. This will result in a kernel panic with reason: BUG: unable to handle kernel paging request at ADDRESS where "ADDRESS" is just past the end of the protection override dump buffer. The start address of the buffer is: p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf and the size of the buffer is buf_size in the same data structure. The panic can be arrived at from either the qede Ethernet driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc02662ed [qed] qed_dbg_protection_override_dump at ffffffffc0267792 [qed] qed_dbg_feature at ffffffffc026aa8f [qed] qed_dbg_all_data at ffffffffc026b211 [qed] qed_fw_fatal_reporter_dump at ffffffffc027298a [qed] devlink_health_do_dump at ffffffff82497f61 devlink_health_report at ffffffff8249cf29 qed_report_fatal_error at ffffffffc0272baf [qed] qede_sp_task at ffffffffc045ed32 [qede] process_one_work at ffffffff81d19783 or the qedf storage driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc068b2ed [qed] qed_dbg_protection_override_dump at ffffffffc068c792 [qed] qed_dbg_feature at ffffffffc068fa8f [qed] qed_dbg_all_data at ffffffffc0690211 [qed] qed_fw_fatal_reporter_dump at ffffffffc069798a [qed] devlink_health_do_dump at ffffffff8aa95e51 devlink_health_report at ffffffff8aa9ae19 qed_report_fatal_error at ffffffffc0697baf [qed] qed_hw_err_notify at ffffffffc06d32d7 [qed] qed_spq_post at ffffffffc06b1011 [qed] qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed] qedf_cleanup_fcport at ffffffffc05e7597 [qedf] qedf_rport_event_handler at ffffffffc05e7bf7 [qedf] fc_rport_work at ffffffffc02da715 [libfc] process_one_work at ffffffff8a319663 Resolve this by clamping the firmware's return value to the maximum number of legal elements the firmware should return.

Опубликовано: 2025-10-04Изменено: 2026-03-24
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39950
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/tcp: Fix a NULL pointer dereference when using TCP-AO with TCP_REPAIR A NULL pointer dereference can occur in tcp_ao_finish_connect() during a connect() system call on a socket with a TCP-AO key added and TCP_REPAIR enabled. The function is called with skb being NULL and attempts to dereference it on tcp_hdr(skb)->seq without a prior skb validation. Fix this by checking if skb is NULL before dereferencing it. The commentary is taken from bpf_skops_established(), which is also called in the same flow. Unlike the function being patched, bpf_skops_established() validates the skb before dereferencing it. int main(void){ struct sockaddr_in sockaddr; struct tcp_ao_add tcp_ao; int sk; int one = 1; memset(&sockaddr,'\0',sizeof(sockaddr)); memset(&tcp_ao,'\0',sizeof(tcp_ao)); sk = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); sockaddr.sin_family = AF_INET; memcpy(tcp_ao.alg_name,"cmac(aes128)",12); memcpy(tcp_ao.key,"ABCDEFGHABCDEFGH",16); tcp_ao.keylen = 16; memcpy(&tcp_ao.addr,&sockaddr,sizeof(sockaddr)); setsockopt(sk, IPPROTO_TCP, TCP_AO_ADD_KEY, &tcp_ao, sizeof(tcp_ao)); setsockopt(sk, IPPROTO_TCP, TCP_REPAIR, &one, sizeof(one)); sockaddr.sin_family = AF_INET; sockaddr.sin_port = htobe16(123); inet_aton("127.0.0.1", &sockaddr.sin_addr); connect(sk,(struct sockaddr *)&sockaddr,sizeof(sockaddr)); return 0; } $ gcc tcp-ao-nullptr.c -o tcp-ao-nullptr -Wall $ unshare -Urn BUG: kernel NULL pointer dereference, address: 00000000000000b6 PGD 1f648d067 P4D 1f648d067 PUD 1982e8067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:tcp_ao_finish_connect (net/ipv4/tcp_ao.c:1182)

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39951
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: um: virtio_uml: Fix use-after-free after put_device in probe When register_virtio_device() fails in virtio_uml_probe(), the code sets vu_dev->registered = 1 even though the device was not successfully registered. This can lead to use-after-free or other issues.

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39952
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: avoid buffer overflow in WID string configuration Fix the following copy overflow warning identified by Smatch checker. drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame() error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537) This patch introduces size check before accessing the memory buffer. The checks are base on the WID type of received data from the firmware. For WID string configuration, the size limit is determined by individual element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field of 'struct wilc_cfg_str'.

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39953
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: cgroup: split cgroup_destroy_wq into 3 workqueues A hung task can occur during [1] LTP cgroup testing when repeatedly mounting/unmounting perf_event and net_prio controllers with systemd.unified_cgroup_hierarchy=1. The hang manifests in cgroup_lock_and_drain_offline() during root destruction. Related case: cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio Call Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8 worker_thread+0x22c/0x3b0 kthread+0xec/0x100 ret_from_fork+0x10/0x20 Root Cause: CPU0 CPU1 mount perf_event umount net_prio cgroup1_get_tree cgroup_kill_sb rebind_subsystems // root destruction enqueues // cgroup_destroy_wq // kill all perf_event css // one perf_event css A is dying // css A offline enqueues cgroup_destroy_wq // root destruction will be executed first css_free_rwork_fn cgroup_destroy_root cgroup_lock_and_drain_offline // some perf descendants are dying // cgroup_destroy_wq max_active = 1 // waiting for css A to die Problem scenario: 1. CPU0 mounts perf_event (rebind_subsystems) 2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work 3. A dying perf_event CSS gets queued for offline after root destruction 4. Root destruction waits for offline completion, but offline work is blocked behind root destruction in cgroup_destroy_wq (max_active=1) Solution: Split cgroup_destroy_wq into three dedicated workqueues: cgroup_offline_wq – Handles CSS offline operations cgroup_release_wq – Manages resource release cgroup_free_wq – Performs final memory deallocation This separation eliminates blocking in the CSS free path while waiting for offline operations to complete. [1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers

Опубликовано: 2025-10-04Изменено: 2026-01-23
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39955
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect(). syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk in the TCP_ESTABLISHED state. [0] syzbot reused the server-side TCP Fast Open socket as a new client before the TFO socket completes 3WHS: 1. accept() 2. connect(AF_UNSPEC) 3. connect() to another destination As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes it to TCP_CLOSE and makes connect() possible, which restarts timers. Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the retransmit timer triggered the warning and the intended packet was not retransmitted. Let's call reqsk_fastopen_remove() in tcp_disconnect(). [0]: WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Modules linked in: CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293 RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017 RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400 RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8 R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540 R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0 FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0 Call Trace: tcp_write_timer (net/ipv4/tcp_timer.c:738) call_timer_fn (kernel/time/timer.c:1747) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372) timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135) tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035) __walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1)) tmigr_handle_remote (kernel/time/timer_migration.c:1096) handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580) irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35))

Опубликовано: 2025-10-09Изменено: 2026-02-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39956
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: igc: don't fail igc_probe() on LED setup error When igc_led_setup() fails, igc_probe() fails and triggers kernel panic in free_netdev() since unregister_netdev() is not called. [1] This behavior can be tested using fault-injection framework, especially the failslab feature. [2] Since LED support is not mandatory, treat LED setup failures as non-fatal and continue probe with a warning message, consequently avoiding the kernel panic. [1] kernel BUG at net/core/dev.c:12047! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:free_netdev+0x278/0x2b0 [...] Call Trace: igc_probe+0x370/0x910 local_pci_probe+0x3a/0x80 pci_device_probe+0xd1/0x200 [...] [2] #!/bin/bash -ex FAILSLAB_PATH=/sys/kernel/debug/failslab/ DEVICE=0000:00:05.0 START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \ | awk '{printf("0x%s", $1)}') END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100))) echo $START_ADDR > $FAILSLAB_PATH/require-start echo $END_ADDR > $FAILSLAB_PATH/require-end echo 1 > $FAILSLAB_PATH/times echo 100 > $FAILSLAB_PATH/probability echo N > $FAILSLAB_PATH/ignore-gfp-wait echo $DEVICE > /sys/bus/pci/drivers/igc/bind

Опубликовано: 2025-10-09Изменено: 2026-02-26
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39957
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: increase scan_ies_len for S1G Currently the S1G capability element is not taken into account for the scan_ies_len, which leads to a buffer length validation failure in ieee80211_prep_hw_scan() and subsequent WARN in __ieee80211_start_scan(). This prevents hw scanning from functioning. To fix ensure we accommodate for the S1G capability length.

Опубликовано: 2025-10-09Изменено: 2026-02-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39961
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: iommu/amd/pgtbl: Fix possible race while increase page table level The AMD IOMMU host page table implementation supports dynamic page table levels (up to 6 levels), starting with a 3-level configuration that expands based on IOVA address. The kernel maintains a root pointer and current page table level to enable proper page table walks in alloc_pte()/fetch_pte() operations. The IOMMU IOVA allocator initially starts with 32-bit address and onces its exhuasted it switches to 64-bit address (max address is determined based on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU driver increases page table level. But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads pgtable->[root/mode] without lock. So its possible that in exteme corner case, when increase_address_space() is updating pgtable->[root/mode], fetch_pte() reads wrong page table level (pgtable->mode). It does compare the value with level encoded in page table and returns NULL. This will result is iommu_unmap ops to fail and upper layer may retry/log WARN_ON. CPU 0 CPU 1 ------ ------ map pages unmap pages alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte() pgtable->root = pte (new root value) READ pgtable->[mode/root] Reads new root, old mode Updates mode (pgtable->mode += 1) Since Page table level updates are infrequent and already synchronized with a spinlock, implement seqcount to enable lock-free read operations on the read path.

Опубликовано: 2025-10-09Изменено: 2026-02-26
CVSS 3.xСРЕДНЯЯ 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39963
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix incorrect io_kiocb reference in io_link_skb In io_link_skb function, there is a bug where prev_notif is incorrectly assigned using 'nd' instead of 'prev_nd'. This causes the context validation check to compare the current notification with itself instead of comparing it with the previous notification. Fix by using the correct prev_nd parameter when obtaining prev_notif.

Опубликовано: 2025-10-09Изменено: 2026-02-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39964
LOW3.3

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg Issuing two writes to the same af_alg socket is bogus as the data will be interleaved in an unpredictable fashion. Furthermore, concurrent writes may create inconsistencies in the internal socket state. Disallow this by adding a new ctx->write field that indiciates exclusive ownership for writing.

Опубликовано: 2025-10-13Изменено: 2026-02-26
CVSS 3.xНИЗКАЯ 3.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L
Ссылки
CVE-2025-39965
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_alloc_spi shouldn't use 0 as SPI x->id.spi == 0 means "no SPI assigned", but since commit 94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create states and add them to the byspi list with this value. __xfrm_state_delete doesn't remove those states from the byspi list, since they shouldn't be there, and this shows up as a UAF the next time we go through the byspi list.

Опубликовано: 2025-10-13Изменено: 2026-02-26
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки
CVE-2025-39966
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix race during abort for file descriptors fput() doesn't actually call file_operations release() synchronously, it puts the file on a work queue and it will be released eventually. This is normally fine, except for iommufd the file and the iommufd_object are tied to gether. The file has the object as it's private_data and holds a users refcount, while the object is expected to remain alive as long as the file is. When the allocation of a new object aborts before installing the file it will fput() the file and then go on to immediately kfree() the obj. This causes a UAF once the workqueue completes the fput() and tries to decrement the users refcount. Fix this by putting the core code in charge of the file lifetime, and call __fput_sync() during abort to ensure that release() is called before kfree. __fput_sync() is a bit too tricky to open code in all the object implementations. Instead the objects tell the core code where the file pointer is and the core will take care of the life cycle. If the object is successfully allocated then the file will hold a users refcount and the iommufd_object cannot be destroyed. It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an issue because close() is already using a synchronous version of fput(). The UAF looks like this: BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164 CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline] __refcount_dec include/linux/refcount.h:455 [inline] refcount_dec include/linux/refcount.h:476 [inline] iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 __fput+0x402/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Опубликовано: 2025-10-15Изменено: 2026-02-26
CVSS 3.xВЫСОКАЯ 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-39967
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: fbcon: fix integer overflow in fbcon_do_set_font Fix integer overflow vulnerabilities in fbcon_do_set_font() where font size calculations could overflow when handling user-controlled font parameters. The vulnerabilities occur when: 1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount multiplication with user-controlled values that can overflow. 2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow 3. This results in smaller allocations than expected, leading to buffer overflows during font data copying. Add explicit overflow checking using check_mul_overflow() and check_add_overflow() kernel helpers to safety validate all size calculations before allocation.

Опубликовано: 2025-10-15Изменено: 2026-02-26
CVSS 3.xВЫСОКАЯ 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Ссылки
CVE-2025-40300
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/vmscape: Add conditional IBPB mitigation VMSCAPE is a vulnerability that exploits insufficient branch predictor isolation between a guest and a userspace hypervisor (like QEMU). Existing mitigations already protect kernel/KVM from a malicious guest. Userspace can additionally be protected by flushing the branch predictors after a VMexit. Since it is the userspace that consumes the poisoned branch predictors, conditionally issue an IBPB after a VMexit and before returning to userspace. Workloads that frequently switch between hypervisor and userspace will incur the most overhead from the new IBPB. This new IBPB is not integrated with the existing IBPB sites. For instance, a task can use the existing speculation control prctl() to get an IBPB at context switch time. With this implementation, the IBPB is doubled up: one at context switch and another before running userspace. The intent is to integrate and optimize these cases post-embargo. [ dhansen: elaborate on suboptimal IBPB solution ]

Опубликовано: 2025-09-11Изменено: 2026-05-12
CVSS 3.xСРЕДНЯЯ 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Ссылки

Закрытые ошибки (1)