ALT-PU-2026-6748-18 — kernel-image-un-def

BDU:2026-04167

MEDIUM6.2

Уязвимость функции dvb_ringbuffer_init() модуля drivers/media/dvb-core/dmxdev.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29Modified: 2026-05-26

CVSS 3.xMEDIUM 6.2

CVSS:3.x/AV:L/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H

CVSS 2.0MEDIUM 5.2

CVSS:2.0/AV:L/AC:H/Au:N/C:P/I:P/A:C

References

BDU:2026-04645

MEDIUM5.5

Уязвимость функции act_gate() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-05Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-04784

MEDIUM5.5

Уязвимость функции acpi_processor_errata_piix4() ядра операционной системы Linux, позволяющая нарушителю вызвать повреждение памяти

Published: 2026-04-06Modified: 2026-04-07

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-04852

HIGH7.5

Уязвимость функции icmp_tag_validation() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-07Modified: 2026-05-26

CVSS 3.xHIGH 7.5

CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0HIGH 7.8

CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:N/A:C

References

BDU:2026-04926

MEDIUM5.3

Уязвимость компонента ksmbd ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации

Published: 2026-04-08Modified: 2026-05-14

CVSS 3.xMEDIUM 5.3

CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L

CVSS 2.0MEDIUM 5.0

CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:N/A:P

References

BDU:2026-05258

HIGH7.0

Уязвимость компонента NFSv4.0 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-13Modified: 2026-05-26

CVSS 3.xHIGH 7.0

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.0

CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C

References

BDU:2026-05764

MEDIUM5.5

Уязвимость компонента sunrpc ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-23Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-05766

MEDIUM5.5

Уязвимость компонента NFSD ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-23Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-05768

MEDIUM4.7

Уязвимость функции nd_async_device_register() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-23Modified: 2026-05-26

CVSS 3.xMEDIUM 4.7

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0LOW 3.8

CVSS:2.0/AV:L/AC:H/Au:S/C:N/I:N/A:C

References

CVE-2025-71287

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.

Published: 2026-05-06Modified: 2026-05-13

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2025-71288

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leaks on common probe Make sure to drop the reference taken when looking up the SMI device during common probe on late probe failure (e.g. probe deferral) and on driver unbind.

Published: 2026-05-06Modified: 2026-05-13

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23245

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gate: snapshot parameters with RCU on replace The gate action can be replaced while the hrtimer callback or dump path is walking the schedule list. Convert the parameters to an RCU-protected snapshot and swap updates under tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits the entry list, preserve the existing schedule so the effective state is unchanged.

Published: 2026-03-18Modified: 2026-05-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23253

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: fix wrong reinitialization of ringbuffer on reopen dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock.

Published: 2026-03-18Modified: 2026-06-01

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23270

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/

Published: 2026-03-18Modified: 2026-05-22

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23271

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: perf: Fix __perf_event_overflow() vs perf_remove_from_context() race Make sure that __perf_event_overflow() runs with IRQs disabled for all possible callchains. Specifically the software events can end up running it with only preemption disabled. This opens up a race vs perf_event_exit_event() and friends that will go and free various things the overflow path expects to be present, like the BPF program.

Published: 2026-03-20Modified: 2026-05-22

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23274

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type.

Published: 2026-03-20Modified: 2026-05-22

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23277

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit through slave devices, but does not update skb->dev to the slave device beforehand. When a gretap tunnel is a TEQL slave, the transmit path reaches iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0 master) and later calls iptunnel_xmit_stats(dev, pkt_len). This function does: get_cpu_ptr(dev->tstats) Since teql_master_setup() does not set dev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes NULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206) Fix this by setting skb->dev = slave before calling netdev_start_xmit(), so that tunnel xmit functions see the correct slave device with properly allocated tstats.

Published: 2026-03-20Modified: 2026-05-22

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23279

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame() In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced at lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); The mesh_matches_local() check above only validates the Mesh ID, Mesh Configuration, and Supported Rates IEs. It does not verify the presence of the Mesh Channel Switch Parameters IE (element ID 118). When a received CSA action frame omits that IE, ieee802_11_parse_elems() leaves elems->mesh_chansw_params_ie as NULL, and the unconditional dereference causes a kernel NULL pointer dereference. A remote mesh peer with an established peer link (PLINK_ESTAB) can trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame that includes a matching Mesh ID and Mesh Configuration IE but omits the Mesh Channel Switch Parameters IE. No authentication beyond the default open mesh peering is required. Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000 Fix by adding a NULL check for mesh_chansw_params_ie after mesh_matches_local() returns, consistent with how other optional IEs are guarded throughout the mesh code. The bug has been present since v3.13 (released 2014-01-19).

Published: 2026-03-25Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23281

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix use-after-free in lbs_free_adapter() The lbs_free_adapter() function uses timer_delete() (non-synchronous) for both command_timer and tx_lockup_timer before the structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If a timer callback is executing when lbs_free_adapter() is called, the callback will access freed memory since lbs_cfg_free() frees the containing structure immediately after lbs_free_adapter() returns. Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler) access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields, which would all be use-after-free violations. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. This bug was introduced in commit 8f641d93c38a ("libertas: detect TX lockups and reset hardware") where del_timer() was used instead of del_timer_sync() in the cleanup path. The command_timer has had the same issue since the driver was first written.

Published: 2026-03-25Modified: 2026-05-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23284

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup() Reset eBPF program pointer to old_prog and do not decrease its ref-count if mtk_open routine in mtk_xdp_setup() fails.

Published: 2026-03-25Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23286

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix null-ptr-deref in lec_arp_clear_vccs syzkaller reported a null-ptr-deref in lec_arp_clear_vccs(). This issue can be easily reproduced using the syzkaller reproducer. In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc). When the underlying VCC is closed, lec_vcc_close() iterates over all ARP entries and calls lec_arp_clear_vccs() for each matched entry. For example, when lec_vcc_close() iterates through the hlists in priv->lec_arp_empty_ones or other ARP tables: 1. In the first iteration, for the first matched ARP entry sharing the VCC, lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back) and sets vcc->user_back to NULL. 2. In the second iteration, for the next matched ARP entry sharing the same VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash. Fix this by adding a null check for vpriv before dereferencing it. If vpriv is already NULL, it means the VCC has been cleared by a previous call, so we can safely skip the cleanup and just clear the entry's vcc/recv_vcc pointers. The entire cleanup block (including vcc_release_async()) is placed inside the vpriv guard because a NULL vpriv indicates the VCC has already been fully released by a prior iteration — repeating the teardown would redundantly set flags and trigger callbacks on an already-closing socket. The Fixes tag points to the initial commit because the entry->vcc path has been vulnerable since the original code. The entry->recv_vcc path was later added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back") with the same pattern, and both paths are fixed here.

Published: 2026-03-25Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23287

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().

Published: 2026-03-25Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23289

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq() Fix a user triggerable leak on the system call failure path.

Published: 2026-03-25Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23290

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: validate USB endpoints The pegasus driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Published: 2026-03-25Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23291

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: properly drop the usb interface reference on disconnect When the device is disconnected from the driver, there is a "dangling" reference count on the usb interface that was grabbed in the probe callback. Fix this up by properly dropping the reference after we are done with it.

Published: 2026-03-25Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23292

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix recursive locking in __configfs_open_file() In flush_write_buffer, &p->frag_sem is acquired and then the loaded store function is called, which, here, is target_core_item_dbroot_store(). This function called filp_open(), following which these functions were called (in reverse order), according to the call trace: down_read __configfs_open_file do_dentry_open vfs_open do_open path_openat do_filp_open file_open_name filp_open target_core_item_dbroot_store flush_write_buffer configfs_write_iter target_core_item_dbroot_store() tries to validate the new file path by trying to open the file path provided to it; however, in this case, the bug report shows: db_root: not a directory: /sys/kernel/config/target/dbroot indicating that the same configfs file was tried to be opened, on which it is currently working on. Thus, it is trying to acquire frag_sem semaphore of the same file of which it already holds the semaphore obtained in flush_write_buffer(), leading to acquiring the semaphore in a nested manner and a possibility of recursive locking. Fix this by modifying target_core_item_dbroot_store() to use kern_path() instead of filp_open() to avoid opening the file using filesystem-specific function __configfs_open_file(), and further modifying it to make this fix compatible.

Published: 2026-03-25Modified: 2026-05-27

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23293

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If an IPv6 packet is injected into the interface, route_shortcircuit() is called and a NULL pointer dereference happens on neigh_lookup(). BUG: kernel NULL pointer dereference, address: 0000000000000380 Oops: Oops: 0000 [#1] SMP NOPTI [...] RIP: 0010:neigh_lookup+0x20/0x270 [...] Call Trace: vxlan_xmit+0x638/0x1ef0 [vxlan] dev_hard_start_xmit+0x9e/0x2e0 __dev_queue_xmit+0xbee/0x14e0 packet_sendmsg+0x116f/0x1930 __sys_sendto+0x1f5/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x12f/0x1590 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by adding an early check on route_shortcircuit() when protocol is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because VXLAN can be built-in even when IPv6 is built as a module.

Published: 2026-03-25Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23296

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix refcount leak for tagset_refcnt This leak will cause a hang when tearing down the SCSI host. For example, iscsid hangs with the following call trace: [130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid" #0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4 #1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f #2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0 #3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f #4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b #5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp] #6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi] #7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi] #8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6 #9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef

Published: 2026-03-25Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23298

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: ucan: Fix infinite loop from zero-length messages If a broken ucan device gets a message with the message length field set to 0, then the driver will loop for forever in ucan_read_bulk_callback(), hanging the system. If the length is 0, just skip the message and go on to the next one. This has been fixed in the kvaser_usb driver in the past in commit 0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in command parsers"), so there must be some broken devices out there like this somewhere.

Published: 2026-03-25Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23300

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop.

Published: 2026-03-25Modified: 2026-05-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23303

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials.

Published: 2026-03-25Modified: 2026-05-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23304

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu() l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too.

Published: 2026-03-25Modified: 2026-05-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23306

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free in pm8001_queue_command() Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors pm8001_queue_command(), however it introduces a potential cause of a double free scenario when it changes the function to return -ENODEV in case of phy down/device gone state. In this path, pm8001_queue_command() updates task status and calls task_done to indicate to upper layer that the task has been handled. However, this also frees the underlying SAS task. A -ENODEV is then returned to the caller. When libsas sas_ata_qc_issue() receives this error value, it assumes the task wasn't handled/queued by LLDD and proceeds to clean up and free the task again, resulting in a double free. Since pm8001_queue_command() handles the SAS task in this case, it should return 0 to the caller indicating that the task has been handled.

Published: 2026-03-25Modified: 2026-05-28

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23307

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message When looking at the data in a USB urb, the actual_length is the size of the buffer passed to the driver, not the transfer_buffer_length which is set by the driver as the max size of the buffer. When parsing the messages in ems_usb_read_bulk_callback() properly check the size both at the beginning of parsing the message to make sure it is big enough for the expected structure, and at the end of the message to make sure we don't overflow past the end of the buffer for the next message.

Published: 2026-03-25Modified: 2026-05-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23309

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tracing: Add NULL pointer check to trigger_data_free() If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse() jumps to the out_free error path. While kfree() safely handles a NULL pointer, trigger_data_free() does not. This causes a NULL pointer dereference in trigger_data_free() when evaluating data->cmd_ops->set_filter. Fix the problem by adding a NULL pointer check to trigger_data_free(). The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y.

Published: 2026-03-25Modified: 2026-05-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23312

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: validate USB endpoints The kaweth driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Published: 2026-03-25Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23315

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob access. [fix check to also cover mgmt->u.action.u.addba_req.capab, correct Fixes tag]

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-23317

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Return the correct value in vmw_translate_ptr functions Before the referenced fixes these functions used a lookup function that returned a pointer. This was changed to another lookup function that returned an error code with the pointer becoming an out parameter. The error path when the lookup failed was not changed to reflect this change and the code continued to return the PTR_ERR of the now uninitialized pointer. This could cause the vmw_translate_ptr functions to return success when they actually failed causing further uninitialized and OOB accesses.

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23318

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Use correct version for UAC3 header validation The entry of the validators table for UAC3 AC header descriptor is defined with the wrong protocol version UAC_VERSION_2, while it should have been UAC_VERSION_3. This results in the validator never matching for actual UAC3 devices (protocol == UAC_VERSION_3), causing their header descriptors to bypass validation entirely. A malicious USB device presenting a truncated UAC3 header could exploit this to cause out-of-bounds reads when the driver later accesses unvalidated descriptor fields. The bug was introduced in the same commit as the recently fixed UAC3 feature unit sub-type typo, and appears to be from the same copy-paste error when the UAC3 section was created from the UAC2 section.

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-23319

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim The root cause of this bug is that when 'bpf_link_put' reduces the refcount of 'shim_link->link.link' to zero, the resource is considered released but may still be referenced via 'tr->progs_hlist' in 'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in 'bpf_shim_tramp_link_release' is deferred. During this window, another process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'. Based on Martin KaFai Lau's suggestions, I have created a simple patch. To fix this: Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'. Only increment the refcount if it is not already zero. Testing: I verified the fix by adding a delay in 'bpf_shim_tramp_link_release' to make the bug easier to trigger: static void bpf_shim_tramp_link_release(struct bpf_link link) { / ... */ if (!shim_link->trampoline) return; + msleep(100); WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline, NULL)); bpf_trampoline_put(shim_link->trampoline); } Before the patch, running a PoC easily reproduced the crash(almost 100%) with a call trace similar to KaiyanM's report. After the patch, the bug no longer occurs even after millions of iterations.

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23321

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always mark signal+subflow endp as used Syzkaller managed to find a combination of actions that was generating this warning: msk->pm.local_addr_used == 0 WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961 Modules linked in: CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline] RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline] RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210 Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a RSP: 0018:ffffc90001663880 EFLAGS: 00010293 RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640 R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650 FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0 Call Trace: genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:742 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2592 ___sys_sendmsg+0x2de/0x320 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66346f826d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8 R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770 The actions that caused that seem to be: - Set the MPTCP subflows limit to 0 - Create an MPTCP endpoint with both the 'signal' and 'subflow' flags - Create a new MPTCP connection from a different address: an ADD_ADDR linked to the MPTCP endpoint will be sent ('signal' flag), but no subflows is initiated ('subflow' flag) - Remove the MPTCP endpoint ---truncated---

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23324

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: usb: etas_es58x: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also.

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23335

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah() struct irdma_create_ah_resp { // 8 bytes, no padding __u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx) __u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK }; rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata(). The reserved members of the structure were not zeroed.

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23336

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23339

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free skb on nci_transceive early error paths nci_transceive() takes ownership of the skb passed by the caller, but the -EPROTO, -EINVAL, and -EBUSY error paths return without freeing it. Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes the nci/nci_dev selftest hits the error path occasionally in NIPA, and kmemleak detects leaks: unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23340

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling.

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23343

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xdp: produce a warning when calculated tailroom is negative Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/ ---truncated---

Published: 2026-03-25Modified: 2026-04-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23351

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23352

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/efi: defer freeing of boot services memory efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE and EFI_BOOT_SERVICES_DATA using memblock_free_late(). There are two issue with that: memblock_free_late() should be used for memory allocated with memblock_alloc() while the memory reserved with memblock_reserve() should be freed with free_reserved_area(). More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y efi_free_boot_services() is called before deferred initialization of the memory map is complete. Benjamin Herrenschmidt reports that this causes a leak of ~140MB of RAM on EC2 t3a.nano instances which only have 512MB or RAM. If the freed memory resides in the areas that memory map for them is still uninitialized, they won't be actually freed because memblock_free_late() calls memblock_free_pages() and the latter skips uninitialized pages. Using free_reserved_area() at this point is also problematic because __free_page() accesses the buddy of the freed page and that again might end up in uninitialized part of the memory map. Delaying the entire efi_free_boot_services() could be problematic because in addition to freeing boot services memory it updates efi.memmap without any synchronization and that's undesirable late in boot when there is concurrency. More robust approach is to only defer freeing of the EFI boot services memory. Split efi_free_boot_services() in two. First efi_unmap_boot_services() collects ranges that should be freed into an array then efi_free_boot_services() later frees them after deferred init is complete.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23356

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23357

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock in error path of mcp251x_open The mcp251x_open() function call free_irq() in its error path with the mpc_lock mutex held. But if an interrupt already occurred the interrupt handler will be waiting for the mpc_lock and free_irq() will deadlock waiting for the handler to finish. This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but for the error path. To solve this issue move the call to free_irq() after the lock is released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ handler will exit right away once it acquired the lock.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23359

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23362

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix locking for bcm_op runtime updates Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") added a locking for some variables that can be modified at runtime when updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup(). Usually the RX_SETUP only handles and filters incoming traffic with one exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is sent when a specific RTR frame is received. Therefore the rx bcm_op uses bcm_can_tx() which uses the bcm_tx_lock that was only initialized in bcm_tx_setup(). Add the missing spin_lock_init() when allocating the bcm_op in bcm_rx_setup() to handle the RTR case properly.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23364

HIGH7.4

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Compare MACs in constant time To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq().

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.4

CVSS:3.x/CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N

References

CVE-2026-23365

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: validate USB endpoints The kalmia driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23367

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: radiotap: reject radiotap with unknown bits The radiotap parser is currently only used with the radiotap namespace (not with vendor namespaces), but if the undefined field 18 is used, the alignment/size is unknown as well. In this case, iterator->_next_ns_data isn't initialized (it's only set for skipping vendor namespaces), and syzbot points out that we later compare against this uninitialized value. Fix this by moving the rejection of unknown radiotap fields down to after the in-namespace lookup, so it will really use iterator->_next_ns_data only for vendor namespaces, even in case undefined fields are present.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23368

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: phy: register phy led_triggers during probe to avoid AB-BA deadlock There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and LED_TRIGGER_PHY are enabled: [ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock); [ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234 [ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c [ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c [ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0 [ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0 [ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c [ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78 [ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock(); [ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0 [ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c [ 1362.104022] [<80014504>] syscall_common+0x34/0x58 Here LED_TRIGGER_PHY is registering LED triggers during phy_attach while holding RTNL and then taking triggers_list_lock. [ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock(); [ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4 [ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock); [ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c [ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc [ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c [ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4 [ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c [ 1362.232164] [<80014504>] syscall_common+0x34/0x58 Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes triggers_list_lock and then RTNL. A classical AB-BA deadlock. phy_led_triggers_registers() does not require the RTNL, it does not make any calls into the network stack which require protection. There is also no requirement the PHY has been attached to a MAC, the triggers only make use of phydev state. This allows the call to phy_led_triggers_registers() to be placed elsewhere. PHY probe() and release() don't hold RTNL, so solving the AB-BA deadlock.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23370

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data set_new_password() hex dumps the entire buffer, which contains plaintext password data, including current and new passwords. Remove the hex dump to avoid leaking credentials.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23372

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23378

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23379

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: fix divide by zero in the offload path Offloading ETS requires computing each class' WRR weight: this is done by averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned int, the same integer size as the individual DRR quanta, can overflow and even cause division by zero, like it happened in the following splat: Oops: divide error: 0000 [#1] SMP PTI CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Call Trace: ets_qdisc_change+0x870/0xf40 [sch_ets] qdisc_create+0x12b/0x540 tc_modify_qdisc+0x6d7/0xbd0 rtnetlink_rcv_msg+0x168/0x6b0 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x1d6/0x2b0 netlink_sendmsg+0x22e/0x470 ____sys_sendmsg+0x38a/0x3c0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x111/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f440b81c77e Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003 RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8 R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980 Modules linked in: sch_ets(E) netdevsim(E) ---[ end trace 0000000000000000 ]--- RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix this using 64-bit integers for 'q_sum' and 'q_psum'.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23381

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23382

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), we handle the fact that raw event callbacks can happen even for a HID device that has not been "claimed" causing a crash if a broken device were attempted to be connected to the system. Fix up the remaining in-tree HID drivers that forgot to add this same check to resolve the same issue.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23388

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-23391

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23392

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flowtable after rcu grace period on error Call synchronize_rcu() after unregistering the hooks from error path, since a hook that already refers to this flowtable can be already registered, exposing this flowtable to packet path and nfnetlink_hook control plane. This error path is rare, it should only happen by reaching the maximum number hooks or by failing to set up to hardware offload, just call synchronize_rcu(). There is a check for already used device hooks by different flowtable that could result in EEXIST at this late stage. The hook parser can be updated to perform this check earlier to this error path really becomes rarely exercised. Uncovered by KASAN reported as use-after-free from nfnetlink_hook path when dumping hooks.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23395

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ Currently the code attempts to accept requests regardless of the command identifier which may cause multiple requests to be marked as pending (FLAG_DEFER_SETUP) which can cause more than L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer causing an overflow. The spec is quite clear that the same identifier shall not be used on subsequent requests: 'Within each signaling channel a different Identifier shall be used for each successive request or indication.' https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d So this attempts to check if there are any channels pending with the same identifier and rejects if any are found.

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23396

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL deref in mesh_matches_local() mesh_matches_local() unconditionally dereferences ie->mesh_config to compare mesh configuration parameters. When called from mesh_rx_csa_frame(), the parsed action-frame elements may not contain a Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a kernel NULL pointer dereference. The other two callers are already safe: - ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before calling mesh_matches_local() - mesh_plink_get_event() is only reached through mesh_process_plink_frame(), which checks !elems->mesh_config, too mesh_rx_csa_frame() is the only caller that passes raw parsed elements to mesh_matches_local() without guarding mesh_config. An adjacent attacker can exploit this by sending a crafted CSA action frame that includes a valid Mesh ID IE but omits the Mesh Configuration IE, crashing the kernel. The captured crash log: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events_unbound cfg80211_wiphy_work [...] Call Trace: ? __pfx_mesh_matches_local (net/mac80211/mesh.c:65) ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686) [...] ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802) [...] cfg80211_wiphy_work (net/wireless/core.c:426) process_one_work (net/kernel/workqueue.c:3280) ? assign_work (net/kernel/workqueue.c:1219) worker_thread (net/kernel/workqueue.c:3352) ? __pfx_worker_thread (net/kernel/workqueue.c:3385) kthread (net/kernel/kthread.c:436) [...] ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255) This patch adds a NULL check for ie->mesh_config at the top of mesh_matches_local() to return false early when the Mesh Configuration IE is absent.

Published: 2026-03-26Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23397

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: nfnetlink_osf: validate individual option lengths in fingerprints nfnl_osf_add_callback() validates opt_num bounds and string NUL-termination but does not check individual option length fields. A zero-length option causes nf_osf_match_one() to enter the option matching loop even when foptsize sums to zero, which matches packets with no TCP options where ctx->optp is NULL: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: nf_osf_match (net/netfilter/nfnetlink_osf.c:227) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:293) nf_hook_slow (net/netfilter/core.c:623) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) Additionally, an MSS option (kind=2) with length < 4 causes out-of-bounds reads when nf_osf_match_one() unconditionally accesses optp[2] and optp[3] for MSS value extraction. While RFC 9293 section 3.2 specifies that the MSS option is always exactly 4 bytes (Kind=2, Length=4), the check uses "< 4" rather than "!= 4" because lengths greater than 4 do not cause memory safety issues -- the buffer is guaranteed to be at least foptsize bytes by the ctx->optsize == foptsize check. Reject fingerprints where any option has zero length, or where an MSS option has length less than 4, at add time rather than trusting these values in the packet matching hot path.

Published: 2026-03-26Modified: 2026-04-24

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-23398

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: icmp: fix NULL pointer dereference in icmp_tag_validation() icmp_tag_validation() unconditionally dereferences the result of rcu_dereference(inet_protos[proto]) without checking for NULL. The inet_protos[] array is sparse -- only about 15 of 256 protocol numbers have registered handlers. When ip_no_pmtu_disc is set to 3 (hardened PMTU mode) and the kernel receives an ICMP Fragmentation Needed error with a quoted inner IP header containing an unregistered protocol number, the NULL dereference causes a kernel panic in softirq context. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143) Call Trace: icmp_rcv (net/ipv4/icmp.c:1527) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207) ip_local_deliver_finish (net/ipv4/ip_input.c:242) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573) __netif_receive_skb_one_core (net/core/dev.c:6164) process_backlog (net/core/dev.c:6628) handle_softirqs (kernel/softirq.c:561) Add a NULL check before accessing icmp_strict_tag_validation. If the protocol has no registered handler, return false since it cannot perform strict tag validation.

Published: 2026-03-26Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23420

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Fix a locking bug Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer.

Published: 2026-04-03Modified: 2026-04-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23422

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ handler") introduces a range check for if_id to avoid an out-of-bounds access. If an out-of-bounds if_id is detected, the interrupt status is not cleared. This may result in an interrupt storm. Clear the interrupt status after detecting an out-of-bounds if_id to avoid the problem. Found by an experimental AI code review agent at Google.

Published: 2026-04-03Modified: 2026-04-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23426

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/logicvc: Fix device node reference leak in logicvc_drm_config_parse() The logicvc_drm_config_parse() function calls of_get_child_by_name() to find the "layers" node but fails to release the reference, leading to a device node reference leak. Fix this by using the __free(device_node) cleanup attribute to automatic release the reference when the variable goes out of scope.

Published: 2026-04-03Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23428

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of share_conf in compound request smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state == TREE_CONNECTED on the initial lookup path, but the compound reuse path bypasses this check entirely. If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(), subsequent commands dereference the freed share_conf through work->tcon->share_conf. KASAN report: [ 4.144653] ================================================================== [ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70 [ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44 [ 4.145772] [ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY [ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work [ 4.145888] Call Trace: [ 4.145892] [ 4.145894] dump_stack_lvl+0x64/0x80 [ 4.145910] print_report+0xce/0x660 [ 4.145919] ? pfxraw_spin_lock_irqsave+0x10/0x10 [ 4.145928] ? smb2_write+0xc74/0xe70 [ 4.145931] kasan_report+0xce/0x100 [ 4.145934] ? smb2_write+0xc74/0xe70 [ 4.145937] smb2_write+0xc74/0xe70 [ 4.145939] ? __pfx_smb2_write+0x10/0x10 [ 4.145942] ? _raw_spin_unlock+0xe/0x30 [ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 4.145948] ? smb2_tree_disconnect+0x31c/0x480 [ 4.145951] handle_ksmbd_work+0x40f/0x1080 [ 4.145953] process_one_work+0x5fa/0xef0 [ 4.145962] ? assign_work+0x122/0x3e0 [ 4.145964] worker_thread+0x54b/0xf70 [ 4.145967] ? __pfx_worker_thread+0x10/0x10 [ 4.145970] kthread+0x346/0x470 [ 4.145976] ? recalc_sigpending+0x19b/0x230 [ 4.145980] ? __pfx_kthread+0x10/0x10 [ 4.145984] ret_from_fork+0x4fb/0x6c0 [ 4.145992] ? __pfx_ret_from_fork+0x10/0x10 [ 4.145995] ? __switch_to+0x36c/0xbe0 [ 4.145999] ? __pfx_kthread+0x10/0x10 [ 4.146003] ret_from_fork_asm+0x1a/0x30 [ 4.146013] [ 4.146014] [ 4.149858] Allocated by task 44: [ 4.149953] kasan_save_stack+0x33/0x60 [ 4.150061] kasan_save_track+0x14/0x30 [ 4.150169] __kasan_kmalloc+0x8f/0xa0 [ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0 [ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600 [ 4.150529] smb2_tree_connect+0x2e6/0x1000 [ 4.150645] handle_ksmbd_work+0x40f/0x1080 [ 4.150761] process_one_work+0x5fa/0xef0 [ 4.150873] worker_thread+0x54b/0xf70 [ 4.150978] kthread+0x346/0x470 [ 4.151071] ret_from_fork+0x4fb/0x6c0 [ 4.151176] ret_from_fork_asm+0x1a/0x30 [ 4.151286] [ 4.151332] Freed by task 44: [ 4.151418] kasan_save_stack+0x33/0x60 [ 4.151526] kasan_save_track+0x14/0x30 [ 4.151634] kasan_save_free_info+0x3b/0x60 [ 4.151751] __kasan_slab_free+0x43/0x70 [ 4.151861] kfree+0x1ca/0x430 [ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190 [ 4.152088] smb2_tree_disconnect+0x1cd/0x480 [ 4.152211] handle_ksmbd_work+0x40f/0x1080 [ 4.152326] process_one_work+0x5fa/0xef0 [ 4.152438] worker_thread+0x54b/0xf70 [ 4.152545] kthread+0x346/0x470 [ 4.152638] ret_from_fork+0x4fb/0x6c0 [ 4.152743] ret_from_fork_asm+0x1a/0x30 [ 4.152853] [ 4.152900] The buggy address belongs to the object at ffff88810430c180 [ 4.152900] which belongs to the cache kmalloc-96 of size 96 [ 4.153226] The buggy address is located 20 bytes inside of [ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0) [ 4.153549] [ 4.153596] The buggy address belongs to the physical page: [ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c [ 4.154000] flags: 0x ---truncated---

Published: 2026-04-03Modified: 2026-04-27

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23434

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: serialize lock/unlock against other NAND operations nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area without holding the NAND device lock. On controllers that implement SET_FEATURES via multiple low-level PIO commands, these can race with concurrent UBI/UBIFS background erase/write operations that hold the device lock, resulting in cmd_pending conflicts on the NAND controller. Add nand_get_device()/nand_release_device() around the lock/unlock operations to serialize them against all other NAND controller access.

Published: 2026-04-03Modified: 2026-04-27

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23438

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: guard flow control update with global_tx_fc in buffer switching mvpp2_bm_switch_buffers() unconditionally calls mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and shared buffer pool modes. This function programs CM3 flow control registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference priv->cm3_base without any NULL check. When the CM3 SRAM resource is not present in the device tree (the third reg entry added by commit 60523583b07c ("dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains NULL and priv->global_tx_fc is false. Any operation that triggers mvpp2_bm_switch_buffers(), for example an MTU change that crosses the jumbo frame threshold, will crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits pc : readl+0x0/0x18 lr : mvpp2_cm3_read.isra.0+0x14/0x20 Call trace: readl+0x0/0x18 mvpp2_bm_pool_update_fc+0x40/0x12c mvpp2_bm_pool_update_priv_fc+0x94/0xd8 mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0 mvpp2_change_mtu+0x140/0x380 __dev_set_mtu+0x1c/0x38 dev_set_mtu_ext+0x78/0x118 dev_set_mtu+0x48/0xa8 dev_ifsioc+0x21c/0x43c dev_ioctl+0x2d8/0x42c sock_ioctl+0x314/0x378 Every other flow control call site in the driver already guards hardware access with either priv->global_tx_fc or port->tx_fc. mvpp2_bm_switch_buffers() is the only place that omits this check. Add the missing priv->global_tx_fc guard to both the disable and re-enable calls in mvpp2_bm_switch_buffers(), consistent with the rest of the driver.

Published: 2026-04-03Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23439

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0 (success) without actually creating a socket. Callers such as fou_create() then proceed to dereference the uninitialized socket pointer, resulting in a NULL pointer dereference. The captured NULL deref crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764) [...] Call Trace: genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209) [...] netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1)) __sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1)) __x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130) This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so callers correctly take their error paths. There is only one caller of the vulnerable function and only privileged users can trigger it.

Published: 2026-04-03Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23443

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix previous acpi_processor_errata_piix4() fix After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()"), device pointers may be dereferenced after dropping references to the device objects pointed to by them, which may cause a use-after-free to occur. Moreover, debug messages about enabling the errata may be printed if the errata flags corresponding to them are unset. Address all of these issues by moving message printing to the points in the code where the errata flags are set.

Published: 2026-04-03Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23446

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: aqc111: Do not perform PM inside suspend callback syzbot reports "task hung in rpm_resume" This is caused by aqc111_suspend calling the PM variant of its write_cmd routine. The simplified call trace looks like this: rpm_suspend() usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING aqc111_suspend() - called for the usb device interface aqc111_write32_cmd() usb_autopm_get_interface() pm_runtime_resume_and_get() rpm_resume() - here we call rpm_resume() on our parent rpm_resume() - Here we wait for a status change that will never happen. At this point we block another task which holds rtnl_lock and locks up the whole networking stack. Fix this by replacing the write_cmd calls with their _nopm variants

Published: 2026-04-03Modified: 2026-04-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23449

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: Fix double-free in teql_master_xmit Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should be called using the seq_lock to avoid racing with the datapath. Failure to do so may cause crashes like the following: [ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139) [ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318 [ 238.029749][ T318] [ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full) [ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 238.029910][ T318] Call Trace: [ 238.029913][ T318] [ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122) [ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) ... [ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563) [ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139) [ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231) [ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1)) [ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139) ... [ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256) [ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827) [ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) ... [ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034) [ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157) [ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077) [ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091) [ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556) ... [ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s: [ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58) [ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5)) [ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369) [ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921) [ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107)) [ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713) [ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763) [ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997) [ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108) [ 238.081469][ T318] [ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s: [ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58) [ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5)) [ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1)) [ 238.085900][ T318] __kasan_slab_free (mm/ ---truncated---

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23450

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock() Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1]. smc_tcp_syn_recv_sock() is called in the TCP receive path (softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP listening socket). It reads sk_user_data to get the smc_sock pointer. However, when the SMC listen socket is being closed concurrently, smc_close_active() sets clcsock->sk_user_data to NULL under sk_callback_lock, and then the smc_sock itself can be freed via sock_put() in smc_release(). This leads to two issues: 1) NULL pointer dereference: sk_user_data is NULL when accessed. 2) Use-after-free: sk_user_data is read as non-NULL, but the smc_sock is freed before its fields (e.g., queued_smc_hs, ori_af_ops) are accessed. The race window looks like this (the syzkaller crash [1] triggers via the SYN cookie path: tcp_get_cookie_sock() -> smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path has the same race): CPU A (softirq) CPU B (process ctx) tcp_v4_rcv() TCP_NEW_SYN_RECV: sk = req->rsk_listener sock_hold(sk) /* No lock on listener */ smc_close_active(): write_lock_bh(cb_lock) sk_user_data = NULL write_unlock_bh(cb_lock) ... smc_clcsock_release() sock_put(smc->sk) x2 -> smc_sock freed! tcp_check_req() smc_tcp_syn_recv_sock(): smc = user_data(sk) -> NULL or dangling smc->queued_smc_hs -> crash! Note that the clcsock and smc_sock are two independent objects with separate refcounts. TCP stack holds a reference on the clcsock, which keeps it alive, but this does NOT prevent the smc_sock from being freed. Fix this by using RCU and refcount_inc_not_zero() to safely access smc_sock. Since smc_tcp_syn_recv_sock() is called in the TCP three-way handshake path, taking read_lock_bh on sk_callback_lock is too heavy and would not survive a SYN flood attack. Using rcu_read_lock() is much more lightweight. - Set SOCK_RCU_FREE on the SMC listen socket so that smc_sock freeing is deferred until after the RCU grace period. This guarantees the memory is still valid when accessed inside rcu_read_lock(). - Use rcu_read_lock() to protect reading sk_user_data. - Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the smc_sock. If the refcount has already reached zero (close path completed), it returns false and we bail out safely. Note: smc_hs_congested() has a similar lockless read of sk_user_data without rcu_read_lock(), but it only checks for NULL and accesses the global smc_hs_wq, never dereferencing any smc_sock field, so it is not affected. Reproducer was verified with mdelay injection and smc_run, the issue no longer occurs with this patch applied. [1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23452

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: PM: runtime: Fix a race condition related to device removal The following code in pm_runtime_work() may dereference the dev->parent pointer after the parent device has been freed: /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); rpm_idle(parent, RPM_ASYNC); spin_unlock(&parent->power.lock); spin_lock(&dev->power.lock); } Fix this by inserting a flush_work() call in pm_runtime_remove(). Without this patch blktest block/001 triggers the following complaint sporadically: BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160 Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081 Workqueue: pm pm_runtime_work Call Trace: dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x8b/0x310 print_report+0xfd/0x1d7 kasan_report+0xd8/0x1d0 __kasan_check_byte+0x42/0x60 lock_acquire.part.0+0x38/0x230 lock_acquire+0x70/0x160 _raw_spin_lock+0x36/0x50 rpm_suspend+0xc6a/0xfe0 rpm_idle+0x578/0x770 pm_runtime_work+0xee/0x120 process_one_work+0xde3/0x1410 worker_thread+0x5eb/0xfe0 kthread+0x37b/0x480 ret_from_fork+0x6cb/0x920 ret_from_fork_asm+0x11/0x20 Allocated by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_alloc_info+0x3d/0x50 __kasan_kmalloc+0xa0/0xb0 __kmalloc_noprof+0x311/0x990 scsi_alloc_target+0x122/0xb60 [scsi_mod] __scsi_scan_target+0x101/0x460 [scsi_mod] scsi_scan_channel+0x179/0x1c0 [scsi_mod] scsi_scan_host_selected+0x259/0x2d0 [scsi_mod] store_scan+0x2d2/0x390 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 do_syscall_64+0xee/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_free_info+0x3f/0x50 __kasan_slab_free+0x67/0x80 kfree+0x225/0x6c0 scsi_target_dev_release+0x3d/0x60 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_dev_release+0xacf/0x12c0 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_put+0x7f/0xc0 [scsi_mod] sdev_store_delete+0xa5/0x120 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23454

HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardown A potential race condition exists in mana_hwc_destroy_channel() where hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt handler to dereference freed memory, leading to a use-after-free or NULL pointer dereference in mana_hwc_handle_resp(). mana_smc_teardown_hwc() signals the hardware to stop but does not synchronize against IRQ handlers already executing on other CPUs. The IRQ synchronization only happens in mana_hwc_destroy_cq() via mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler() can dereference freed caller_ctx (and rxq->msg_buf) in mana_hwc_handle_resp(). Fix this by reordering teardown to reverse-of-creation order: destroy the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This ensures all in-flight interrupt handlers complete before the memory they access is freed.

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xHIGH 7.0

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23455

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: check for zero length in DecodeQ931() In DecodeQ931(), the UserUserIE code path reads a 16-bit length from the packet, then decrements it by 1 to skip the protocol discriminator byte before passing it to DecodeH323_UserInformation(). If the encoded length is 0, the decrement wraps to -1, which is then passed as a large value to the decoder, leading to an out-of-bounds read. Add a check to ensure len is positive after the decrement.

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xCRITICAL 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-23456

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case In decode_int(), the CONS case calls get_bits(bs, 2) to read a length value, then calls get_uint(bs, len) without checking that len bytes remain in the buffer. The existing boundary check only validates the 2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint() reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte slab-out-of-bounds read. Add a boundary check for len bytes after get_bits() and before get_uint().

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xHIGH 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H

References

CVE-2026-23457

HIGH8.6

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp() sip_help_tcp() parses the SIP Content-Length header with simple_strtoul(), which returns unsigned long, but stores the result in unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are silently truncated before computing the SIP message boundary. For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32, causing the parser to miscalculate where the current message ends. The loop then treats trailing data in the TCP segment as a second SIP message and processes it through the SDP parser. Fix this by changing clen to unsigned long to match the return type of simple_strtoul(), and reject Content-Length values that exceed the remaining TCP payload length.

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xHIGH 8.6

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H

References

CVE-2026-23458

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct() ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the conntrack reference immediately after netlink_dump_start(). When the dump spans multiple rounds, the second recvmsg() triggers the dump callback which dereferences the now-freed conntrack via nfct_help(ct), leading to a use-after-free on ct->ext. The bug is that the netlink_dump_control has no .start or .done callbacks to manage the conntrack reference across dump rounds. Other dump functions in the same file (e.g. ctnetlink_get_conntrack) properly use .start/.done callbacks for this purpose. Fix this by adding .start and .done callbacks that hold and release the conntrack reference for the duration of the dump, and move the nfct_help() call after the cb->args[0] early-return check in the dump callback to avoid dereferencing ct->ext unnecessarily. BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0 Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133 CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY Call Trace: ctnetlink_exp_ct_dump_table+0x4f/0x2e0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 ? aa_sk_perm+0x184/0x450 sock_recvmsg+0xde/0xf0 Allocated by task 133: kmem_cache_alloc_noprof+0x134/0x440 __nf_conntrack_alloc+0xa8/0x2b0 ctnetlink_create_conntrack+0xa1/0x900 ctnetlink_new_conntrack+0x3cf/0x7d0 nfnetlink_rcv_msg+0x48e/0x510 netlink_rcv_skb+0xc9/0x1f0 nfnetlink_rcv+0xdb/0x220 netlink_unicast+0x3ec/0x590 netlink_sendmsg+0x397/0x690 __sys_sendmsg+0xf4/0x180 Freed by task 0: slab_free_after_rcu_debug+0xad/0x1e0 rcu_core+0x5c3/0x9c0

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23460

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/rose: fix NULL pointer dereference in rose_transmit_link on reconnect syzkaller reported a bug [1], and the reproducer is available at [2]. ROSE sockets use four sk->sk_state values: TCP_CLOSE, TCP_LISTEN, TCP_SYN_SENT, and TCP_ESTABLISHED. rose_connect() already rejects calls for TCP_ESTABLISHED (-EISCONN) and TCP_CLOSE with SS_CONNECTING (-ECONNREFUSED), but lacks a check for TCP_SYN_SENT. When rose_connect() is called a second time while the first connection attempt is still in progress (TCP_SYN_SENT), it overwrites rose->neighbour via rose_get_neigh(). If that returns NULL, the socket is left with rose->state == ROSE_STATE_1 but rose->neighbour == NULL. When the socket is subsequently closed, rose_release() sees ROSE_STATE_1 and calls rose_write_internal() -> rose_transmit_link(skb, NULL), causing a NULL pointer dereference. Per connect(2), a second connect() while a connection is already in progress should return -EALREADY. Add this missing check for TCP_SYN_SENT to complete the state validation in rose_connect(). [1] https://syzkaller.appspot.com/bug?extid=d00f90e0af54102fb271 [2] https://gist.github.com/mrpre/9e6779e0d13e2c66779b1653fef80516

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23462

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: Fix possible UAF This fixes the following trace caused by not dropping l2cap_conn reference when user->remove callback is called: [ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00 [ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy) [ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 97.809947] Call Trace: [ 97.809954] [ 97.809961] dump_stack_lvl (lib/dump_stack.c:122) [ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808) [ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798) [ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1)) [ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341) [ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2)) [ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360) [ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285) [ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5)) [ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752) [ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716) [ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691) [ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678) [ 97.810404] __fput (fs/file_table.c:470) [ 97.810430] task_work_run (kernel/task_work.c:235) [ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201) [ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5)) [ 97.810527] do_exit (kernel/exit.c:972) [ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810574] ? __pfx_do_exit (kernel/exit.c:897) [ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6)) [ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4)) [ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1)) [ 97.810721] do_group_exit (kernel/exit.c:1093) [ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1)) [ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366) [ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810826] ? vfs_read (fs/read_write.c:555) [ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800) [ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555) [ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 97.810960] arch_do_signal_or_restart (arch/ ---truncated---

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-23463

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: soc: fsl: qbman: fix race condition in qman_destroy_fq When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between fq_table[fq->idx] state and freeing/allocating from the pool and WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered. Indeed, we can have: Thread A Thread B qman_destroy_fq() qman_create_fq() qman_release_fqid() qman_shutdown_fq() gen_pool_free() -- At this point, the fqid is available again -- qman_alloc_fqid() -- so, we can get the just-freed fqid in thread B -- fq->fqid = fqid; fq->idx = fqid * 2; WARN_ON(fq_table[fq->idx]); fq_table[fq->idx] = fq; fq_table[fq->idx] = NULL; And adding some logs between qman_release_fqid() and fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more. To prevent that, ensure that fq_table[fq->idx] is set to NULL before gen_pool_free() is called by using smp_wmb().

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23474

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mtd: Avoid boot crash in RedBoot partition table parser Given CONFIG_FORTIFY_SOURCE=y and a recent compiler, commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when available") produces the warning below and an oops. Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000 ------------[ cut here ]------------ WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1 memcmp: detected buffer overflow: 15 byte read of buffer size 14 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE As Kees said, "'names' is pointing to the final 'namelen' many bytes of the allocation ... 'namelen' could be basically any length at all. This fortify warning looks legit to me -- this code used to be reading beyond the end of the allocation." Since the size of the dynamic allocation is calculated with strlen() we can use strcmp() instead of memcmp() and remain within bounds.

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23475

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: spi: fix statistics allocation The controller per-cpu statistics is not allocated until after the controller has been registered with driver core, which leaves a window where accessing the sysfs attributes can trigger a NULL-pointer dereference. Fix this by moving the statistics allocation to controller allocation while tying its lifetime to that of the controller (rather than using implicit devres).

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31389

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free on controller registration failure Make sure to deregister from driver core also in the unlikely event that per-cpu statistics allocation fails during controller registration to avoid use-after-free (of driver resources) and unclocked register accesses.

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31391

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix OOM ->tfm_count leak If memory allocation fails, decrement ->tfm_count to avoid blocking future reads.

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31392

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix krb5 mount with username option Customer reported that some of their krb5 mounts were failing against a single server as the client was trying to mount the shares with wrong credentials. It turned out the client was reusing SMB session from first mount to try mounting the other shares, even though a different username= option had been specified to the other mounts. By using username mount option along with sec=krb5 to search for principals from keytab is supported by cifs.upcall(8) since cifs-utils-4.8. So fix this by matching username mount option in match_session() even with Kerberos. For example, the second mount below should fail with -ENOKEY as there is no 'foobar' principal in keytab (/etc/krb5.keytab). The client ends up reusing SMB session from first mount to perform the second one, which is wrong. ``` $ ktutil ktutil: add_entry -password -p testuser -k 1 -e aes256-cts Password for testuser@ZELDA.TEST: ktutil: write_kt /etc/krb5.keytab ktutil: quit $ klist -ke Keytab name: FILE:/etc/krb5.keytab KVNO Principal ---- ---------------------------------------------------------------- 1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96) $ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser $ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar $ mount -t cifs | grep -Po 'username=\K\w+' testuser testuser ```

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xHIGH 8.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:L

References

CVE-2026-31393

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access l2cap_information_rsp() checks that cmd_len covers the fixed l2cap_info_rsp header (type + result, 4 bytes) but then reads rsp->data without verifying that the payload is present: - L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads 4 bytes past the header (needs cmd_len >= 8). - L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header (needs cmd_len >= 5). A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an out-of-bounds read of adjacent skb data. Guard each data access with the required payload length check. If the payload is too short, skip the read and let the state machine complete with safe defaults (feat_mask and remote_fixed_chan remain zero from kzalloc), so the info timer cleanup and l2cap_conn_start() still run and the connection is not stalled.

Published: 2026-04-03Modified: 2026-05-26

CVSS 3.xHIGH 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-31396

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use-after-free access to PTP clock PTP clock is registered on every opening of the interface and destroyed on every closing. However it may be accessed via get_ts_info ethtool call which is possible while the interface is just present in the kernel. BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 Read of size 4 at addr ffff8880194345cc by task syz.0.6/948 CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106 print_address_description mm/kasan/report.c:316 [inline] print_report+0x17f/0x496 mm/kasan/report.c:420 kasan_report+0xd9/0x180 mm/kasan/report.c:524 ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349 macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371 __ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558 ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline] __dev_ethtool net/ethtool/ioctl.c:3017 [inline] dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095 dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510 sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215 sock_ioctl+0x577/0x6d0 net/socket.c:1320 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 457: kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:699 [inline] ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235 gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375 macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920 __dev_open+0x2ce/0x500 net/core/dev.c:1501 __dev_change_flags+0x56a/0x740 net/core/dev.c:8651 dev_change_flags+0x92/0x170 net/core/dev.c:8722 do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833 __rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608 rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655 rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150 netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x14b/0x180 net/socket.c:730 __sys_sendto+0x320/0x3b0 net/socket.c:2152 __do_sys_sendto net/socket.c:2164 [inline] __se_sys_sendto net/socket.c:2160 [inline] __x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 938: kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1729 [inline] slab_free_freelist_hook mm/slub.c:1755 [inline] slab_free mm/slub.c:3687 [inline] __kmem_cache_free+0xbc/0x320 mm/slub.c:3700 device_release+0xa0/0x240 drivers/base/core.c:2507 kobject_cleanup lib/kobject.c:681 [inline] kobject_release lib/kobject.c:712 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1cd/0x350 lib/kobject.c:729 put_device+0x1b/0x30 drivers/base/core.c:3805 ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391 gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404 macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966 __dev_close_many+0x1b9/0x310 net/core/dev.c:1585 __dev_close net/core/dev.c:1597 [inline] __dev_change_flags+0x2bb/0x740 net/core/dev.c:8649 dev_change_fl ---truncated---

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31399

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: nvdimm/bus: Fix potential use after free in asynchronous initialization Dingisoul with KASAN reports a use after free if device_add() fails in nd_async_device_register(). Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while scheduling async init") correctly added a reference on the parent device to be held until asynchronous initialization was complete. However, if device_add() results in an allocation failure the ref count of the device drops to 0 prior to the parent pointer being accessed. Thus resulting in use after free. The bug bot AI correctly identified the fix. Save a reference to the parent pointer to be used to drop the parent reference regardless of the outcome of device_add().

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31400

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix cache_request leak in cache_release When a reader's file descriptor is closed while in the middle of reading a cache_request (rp->offset != 0), cache_release() decrements the request's readers count but never checks whether it should free the request. In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the cache_request is removed from the queue and freed along with its buffer and cache_head reference. cache_release() lacks this cleanup. The only other path that frees requests with readers == 0 is cache_dequeue(), but it runs only when CACHE_PENDING transitions from set to clear. If that transition already happened while readers was still non-zero, cache_dequeue() will have skipped the request, and no subsequent call will clean it up. Add the same cleanup logic from cache_read() to cache_release(): after decrementing readers, check if it reached 0 with CACHE_PENDING clear, and if so, dequeue and free the cache_request.

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31402

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request.

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31403

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd The /proc/fs/nfs/exports proc entry is created at module init and persists for the module's lifetime. exports_proc_open() captures the caller's current network namespace and stores its svc_export_cache in seq->private, but takes no reference on the namespace. If the namespace is subsequently torn down (e.g. container destruction after the opener does setns() to a different namespace), nfsd_net_exit() calls nfsd_export_shutdown() which frees the cache. Subsequent reads on the still-open fd dereference the freed cache_detail, walking a freed hash table. Hold a reference on the struct net for the lifetime of the open file descriptor. This prevents nfsd_net_exit() from running -- and thus prevents nfsd_export_shutdown() from freeing the cache -- while any exports fd is open. cache_detail already stores its net pointer (cd->net, set by cache_create_net()), so exports_release() can retrieve it without additional per-file storage.

Published: 2026-04-03Modified: 2026-05-20

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31405

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: media: dvb-net: fix OOB access in ULE extension header tables The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables in handle_one_ule_extension() are declared with 255 elements (valid indices 0-254), but the index htype is derived from network-controlled data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When htype equals 255, an out-of-bounds read occurs on the function pointer table, and the OOB value may be called as a function pointer. Add a bounds check on htype against the array size before either table is accessed. Out-of-range values now cause the SNDU to be discarded.

Published: 2026-04-06Modified: 2026-05-20

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31409

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset conn->binding on failed binding request When a multichannel SMB2_SESSION_SETUP request with SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true but never clears it on the error path. This leaves the connection in a binding state where all subsequent ksmbd_session_lookup_all() calls fall back to the global sessions table. This fix it by clearing conn->binding = false in the error path.

Published: 2026-04-06Modified: 2026-06-01

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31412

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks() The `check_command_size_in_blocks()` function calculates the data size in bytes by left shifting `common->data_size_from_cmnd` by the block size (`common->curlun->blkbits`). However, it does not validate whether this shift operation will cause an integer overflow. Initially, the block size is set up in `fsg_lun_open()` , and the `common->data_size_from_cmnd` is set up in `do_scsi_command()`. During initialization, there is no integer overflow check for the interaction between two variables. So if a malicious USB host sends a SCSI READ or WRITE command requesting a large amount of data (`common->data_size_from_cmnd`), the left shift operation can wrap around. This results in a truncated data size, which can bypass boundary checks and potentially lead to memory corruption or out-of-bounds accesses. Fix this by using the check_shl_overflow() macro to safely perform the shift and catch any overflows.

Published: 2026-04-10Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31540

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Check set_default_submission() before deferencing When the i915 driver firmware binaries are not present, the set_default_submission pointer is not set. This pointer is dereferenced during suspend anyways. Add a check to make sure it is set before dereferencing. [ 23.289926] PM: suspend entry (deep) [ 23.293558] Filesystems sync: 0.000 seconds [ 23.298010] Freezing user space processes [ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds) [ 23.309766] OOM killer disabled. [ 23.313027] Freezing remaining freezable tasks [ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 23.342038] serial 00:05: disabled [ 23.345719] serial 00:02: disabled [ 23.349342] serial 00:01: disabled [ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 23.361635] ata1.00: Entering standby power mode [ 23.368863] ata2.00: Entering standby power mode [ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 23.452194] #PF: supervisor instruction fetch in kernel mode [ 23.457896] #PF: error_code(0x0010) - not-present page [ 23.463065] PGD 0 P4D 0 [ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI [ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary) [ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 23.496511] Workqueue: async async_run_entry_fn [ 23.501087] RIP: 0010:0x0 [ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246 [ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f [ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000 [ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff [ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8 [ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68 [ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000 [ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0 [ 23.572539] PKRU: 55555554 [ 23.575281] Call Trace: [ 23.577770] [ 23.579905] intel_engines_reset_default_submission+0x42/0x60 [ 23.585695] __intel_gt_unset_wedged+0x191/0x200 [ 23.590360] intel_gt_unset_wedged+0x20/0x40 [ 23.594675] gt_sanitize+0x15e/0x170 [ 23.598290] i915_gem_suspend_late+0x6b/0x180 [ 23.602692] i915_drm_suspend_late+0x35/0xf0 [ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10 [ 23.611843] dpm_run_callback+0x78/0x1c0 [ 23.615817] device_suspend_late+0xde/0x2e0 [ 23.620037] async_suspend_late+0x18/0x30 [ 23.624082] async_run_entry_fn+0x25/0xa0 [ 23.628129] process_one_work+0x15b/0x380 [ 23.632182] worker_thread+0x2a5/0x3c0 [ 23.635973] ? __pfx_worker_thread+0x10/0x10 [ 23.640279] kthread+0xf6/0x1f0 [ 23.643464] ? __pfx_kthread+0x10/0x10 [ 23.647263] ? __pfx_kthread+0x10/0x10 [ 23.651045] ret_from_fork+0x131/0x190 [ 23.654837] ? __pfx_kthread+0x10/0x10 [ 23.658634] ret_from_fork_asm+0x1a/0x30 [ 23.662597] [ 23.664826] Modules linked in: [ 23.667914] CR2: 0000000000000000 [ 23.671271] ------------[ cut here ]------------ (cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad)

Published: 2026-04-24Modified: 2026-04-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31545

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: NFC: nxp-nci: allow GPIOs to sleep Allow the firmware and enable GPIOs to sleep. This fixes a `WARN_ON' and allows the driver to operate GPIOs which are connected to I2C GPIO expanders. -- >8 -- kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98 -- >8 --

Published: 2026-04-24Modified: 2026-04-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31546

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL deref in bond_debug_rlb_hash_show rlb_clear_slave intentionally keeps RLB hash-table entries on the rx_hashtbl_used_head list with slave set to NULL when no replacement slave is available. However, bond_debug_rlb_hash_show visites client_info->slave without checking if it's NULL. Other used-list iterators in bond_alb.c already handle this NULL-slave state safely: - rlb_update_client returns early on !client_info->slave - rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance compare slave values before visiting - lb_req_update_subnet_clients continues if slave is NULL The following NULL deref crash can be trigger in bond_debug_rlb_hash_show: [ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41) [ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286 [ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204 [ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078 [ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000 [ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0 [ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8 [ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000 [ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0 [ 1.295897] Call Trace: [ 1.296134] seq_read_iter (fs/seq_file.c:231) [ 1.296341] seq_read (fs/seq_file.c:164) [ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1)) [ 1.296658] vfs_read (fs/read_write.c:572) [ 1.296981] ksys_read (fs/read_write.c:717) [ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add a NULL check and print "(none)" for entries with no assigned slave.

Published: 2026-04-24Modified: 2026-04-28

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31548

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down When the nl80211 socket that originated a PMSR request is closed, cfg80211_release_pmsr() sets the request's nl_portid to zero and schedules pmsr_free_wk to process the abort asynchronously. If the interface is concurrently torn down before that work runs, cfg80211_pmsr_wdev_down() calls cfg80211_pmsr_process_abort() directly. However, the already- scheduled pmsr_free_wk work item remains pending and may run after the interface has been removed from the driver. This could cause the driver's abort_pmsr callback to operate on a torn-down interface, leading to undefined behavior and potential crashes. Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down() before calling cfg80211_pmsr_process_abort(). This ensures any pending or in-progress work is drained before interface teardown proceeds, preventing the work from invoking the driver abort callback after the interface is gone.

Published: 2026-04-24Modified: 2026-04-27

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31549

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: i2c: cp2615: fix serial string NULL-deref at probe The cp2615 driver uses the USB device serial string as the i2c adapter name but does not make sure that the string exists. Verify that the device has a serial number before accessing it to avoid triggering a NULL-pointer dereference (e.g. with malicious devices).

Published: 2026-04-24Modified: 2026-04-27

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31550

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pmdomain: bcm: bcm2835-power: Increase ASB control timeout The bcm2835_asb_control() function uses a tight polling loop to wait for the ASB bridge to acknowledge a request. During intensive workloads, this handshake intermittently fails for V3D's master ASB on BCM2711, resulting in "Failed to disable ASB master for v3d" errors during runtime PM suspend. As a consequence, the failed power-off leaves V3D in a broken state, leading to bus faults or system hangs on later accesses. As the timeout is insufficient in some scenarios, increase the polling timeout from 1us to 5us, which is still negligible in the context of a power domain transition. Also, replace the open-coded ktime_get_ns()/ cpu_relax() polling loop with readl_poll_timeout_atomic().

Published: 2026-04-24Modified: 2026-04-27

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31551

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix static_branch_dec() underflow for aql_disable. syzbot reported static_branch_dec() underflow in aql_enable_write(). [0] The problem is that aql_enable_write() does not serialise concurrent write()s to the debugfs. aql_enable_write() checks static_key_false(&aql_disable.key) and later calls static_branch_inc() or static_branch_dec(), but the state may change between the two calls. aql_disable does not need to track inc/dec. Let's use static_branch_enable() and static_branch_disable(). [0]: val == 0 WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288 Modules linked in: CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full) Tainted: [U]=USER, [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311 Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00 RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4 RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98 FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0 Call Trace: __static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline] __static_key_slow_dec kernel/jump_label.c:321 [inline] static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336 aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343 short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383 vfs_write+0x2aa/0x1070 fs/read_write.c:684 ksys_pwrite64 fs/read_write.c:793 [inline] __do_sys_pwrite64 fs/read_write.c:801 [inline] __se_sys_pwrite64 fs/read_write.c:798 [inline] __x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f530cf9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012 RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010 RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978

Published: 2026-04-24Modified: 2026-04-27

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31552

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push"), wl1271_tx_allocate() and with it wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails. However, in wlcore_tx_work_locked(), a return value of -EAGAIN from wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being full. This causes the code to flush the buffer, put the skb back at the head of the queue, and immediately retry the same skb in a tight while loop. Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens immediately with GFP_ATOMIC, this will result in an infinite loop and a CPU soft lockup. Return -ENOMEM instead so the packet is dropped and the loop terminates. The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y.

Published: 2026-04-24Modified: 2026-04-27

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31683

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: batman-adv: avoid OGM aggregation when skb tailroom is insufficient When OGM aggregation state is toggled at runtime, an existing forwarded packet may have been allocated with only packet_len bytes, while a later packet can still be selected for aggregation. Appending in this case can hit skb_put overflow conditions. Reject aggregation when the target skb tailroom cannot accommodate the new packet. The caller then falls back to creating a new forward packet instead of appending.

Published: 2026-04-25Modified: 2026-05-06

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31788

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich)

Published: 2026-03-25Modified: 2026-04-24

CVSS 3.xHIGH 8.2

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-43060

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies.

Published: 2026-05-05Modified: 2026-05-22

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43061

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized.

Published: 2026-05-05Modified: 2026-05-29

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43062

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp() l2cap_ecred_reconf_rsp() casts the incoming data to struct l2cap_ecred_conn_rsp (the ECRED connection response, 8 bytes with result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes with result at offset 0). This causes two problems: - The sizeof(*rsp) length check requires 8 bytes instead of the correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected with -EPROTO. - rsp->result reads from offset 6 instead of offset 0, returning wrong data when the packet is large enough to pass the check. Fix by using the correct type. Also pass the already byte-swapped result variable to BT_DBG instead of the raw __le16 field.

Published: 2026-05-05Modified: 2026-05-29

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:L

References

CVE-2026-43162

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: tegra-video: Fix memory leak in __tegra_channel_try_format() The state object allocated by __v4l2_subdev_state_alloc() must be freed with __v4l2_subdev_state_free() when it is no longer needed. In __tegra_channel_try_format(), two error paths return directly after v4l2_subdev_call() fails, without freeing the allocated 'sd_state' object. This violates the requirement and causes a memory leak. Fix this by introducing a cleanup label and using goto statements in the error paths to ensure that __v4l2_subdev_state_free() is always called before the function returns.

Published: 2026-05-06Modified: 2026-05-13

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43252

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always set ID as avail when rm endp Syzkaller managed to find a combination of actions that was generating this warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000 ---truncated---

Published: 2026-05-06Modified: 2026-05-11

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43256

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update() vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop bound and passes the index to vfe_isr_reg_update(). However, vfe->line[] array is defined with VFE_LINE_NUM_MAX(4): struct vfe_line line[VFE_LINE_NUM_MAX]; When index is 4, 5, 6, the access to vfe->line[line_id] exceeds the array bounds and resulting in out-of-bounds memory access. Fix this by using separate loops for output lines and write masters.

Published: 2026-05-06Modified: 2026-05-11

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43265

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block() Ignore -EBUSY when checking nested events after exiting a blocking state while L2 is active, as exiting to userspace will generate a spurious userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's demise. Continuing with the wakeup isn't perfect either, as something has gone sideways if a vCPU is awakened in L2 with an injected event (or worse, a nested run pending), but continuing on gives the VM a decent chance of surviving without any major side effects. As explained in the Fixes commits, it _should_ be impossible for a vCPU to be put into a blocking state with an already-injected event (exception, IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected events, and thus put the vCPU into what should be an impossible state. Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be violating x86 architecture, e.g. by WARNing if KVM attempts to inject an exception or interrupt while the vCPU isn't running.

Published: 2026-05-06Modified: 2026-05-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43281

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate() Although it is guided that `#mbox-cells` must be at least 1, there are many instances of `#mbox-cells = <0>;` in the device tree. If that is the case and the corresponding mailbox controller does not provide `fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will be used by default and out-of-bounds accesses could occur due to lack of bounds check in that function.

Published: 2026-05-06Modified: 2026-06-01

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43355

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43357

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050-core: fix pm_runtime error handling The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails.

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43359

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on set received ioctl due to item overflow If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon.

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43360

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on file creation due to name hash collision If we attempt to create several files with names that result in the same hash, we have to pack them in same dir item and that has a limit inherent to the leaf size. However if we reach that limit, we trigger a transaction abort and turns the filesystem into RO mode. This allows for a malicious user to disrupt a system, without the need to have administration privileges/capabilities. Reproducer: $ cat exploit-hash-collisions.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster and require fewer file # names that result in hash collision. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # List of names that result in the same crc32c hash for btrfs. declare -a names=( 'foobar' '%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC' 'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z' 'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4' 'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:' 'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO' 'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us' 'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY' 'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO' 'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU' 'Ono7avN5GjC:_6dBJ_' 'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am' 'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k' 'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2' 'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd' 'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm' 'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ' 'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky' 'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS' 'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz' 'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu' 'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN' 'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4=' 'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn' 'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C' 'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW' '8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc' 'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC ---truncated---

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43361

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort when snapshotting received subvolumes Currently a user can trigger a transaction abort by snapshotting a previously received snapshot a bunch of times until we reach a BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we can store in a leaf). This is very likely not common in practice, but if it happens, it turns the filesystem into RO mode. The snapshot, send and set_received_subvol and subvol_setflags (used by receive) don't require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user could use this to turn a filesystem into RO mode and disrupt a system. Reproducer script: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # Create a subvolume and set it to RO so that it can be used for send. btrfs subvolume create $MNT/sv touch $MNT/sv/foo btrfs property set $MNT/sv ro true # Send and receive the subvolume into snaps/sv. mkdir $MNT/snaps btrfs send $MNT/sv | btrfs receive $MNT/snaps # Now snapshot the received subvolume, which has a received_uuid, a # lot of times to trigger the leaf overflow. total=500 for ((i = 1; i <= $total; i++)); do echo -ne "\rCreating snapshot $i/$total" btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null done echo umount $MNT When running the test: $ ./test.sh (...) Create subvolume '/mnt/sdi/sv' At subvol /mnt/sdi/sv At subvol sv Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system And in dmesg/syslog: $ dmesg (...) [251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252! [251067.629212] ------------[ cut here ]------------ [251067.630033] BTRFS: Transaction aborted (error -75) [251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235 [251067.632851] Modules linked in: btrfs dm_zero (...) [251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [251067.646165] Tainted: [W]=WARN [251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs] [251067.649984] Code: f0 48 0f (...) [251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292 [251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3 [251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750 [251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820 [251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0 [251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5 [251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000 [251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0 [251067.661972] Call Trace: [251067.662292] [251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs] [251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs] [251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs] [251067.665238] ? _raw_spin_unlock+0x15/0x30 [251067.665837] ? record_root_ ---truncated---

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43363

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43365

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Ending clean mount ...on the current xfsprogs for-next which has a broken mkfs. xfs_info shows this... meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 = exchange=1 metadir=1 data = bsize=4096 blocks=2579968, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=4096 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 = rgcount=0 rgsize=268435456 extents = zoned=0 start=0 reserved=0 ...observe that the log section has sectsz=4096 sunit=0, which means that the roundoff factor is 512, not 4096 as you'd expect. We should fix mkfs not to generate broken filesystems, but anyone can fuzz the ondisk superblock so we should be more cautious. I think the inadequate logic predates commit a6a65fef5ef8d0, but that's clearly going to require a different backport.

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xHIGH 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H

References

CVE-2026-43366

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks.

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43370

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43371

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', `macb_tx_poll()` incorrectly assumes there are no packets to handle because `queue->tx_head == queue->tx_tail`. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to `queue->tx_head` and `queue->tx_tail` are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43373

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: ncsi: fix skb leak in error paths Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed.

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43377

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Don't log keys in SMB3 signing and encryption key generation When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and generate_smb3encryptionkey() log the session, signing, encryption, and decryption key bytes. Remove the logs to avoid exposing credentials.

Published: 2026-05-08Modified: 2026-05-15

CVSS 3.xHIGH 8.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N

References

CVE-2026-43378

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is dereferenced after rcu_read_unlock(), creating a use-after-free window.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43380

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the zero-initialized 'data_char' and writing to 'data', resulting in all-zero output regardless of the actual I2C read. Fix this by: 1. Expanding 'data_char' to 66 bytes to safely hold the hex output. 2. Correcting the bin2hex() argument order and using the actual read count. 3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43381

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening.

Published: 2026-05-08Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43382

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called.

Published: 2026-05-08Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43383

CRITICAL9.4

In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

Published: 2026-05-08Modified: 2026-05-26

CVSS 3.xCRITICAL 9.4

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H

References

CVE-2026-43386

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

Published: 2026-05-08Modified: 2026-05-26

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43387

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it

Published: 2026-05-08Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43405

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43406

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xCRITICAL 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43407

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? pfxraw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? pfxraw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? pfxraw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ]

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xCRITICAL 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43411

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set conn_timeout to any value via setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in tipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4); If conn_timeout is in the range [0, 3], the integer division yields 0, and the modulo operation triggers a divide-by-zero exception, causing a kernel oops/panic. Fix this by clamping conn_timeout to a minimum of 4 at the point of use in tipc_sk_filter_connect(). Oops: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+ RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362) Call Trace: tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406) __release_sock (include/net/sock.h:1185 net/core/sock.c:3213) release_sock (net/core/sock.c:3797) tipc_connect (net/tipc/socket.c:2570) __sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43412

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and start During ADSP stop and start, the kernel crashes due to the order in which ASoC components are removed. On ADSP stop, the q6apm-audio .remove callback unloads topology and removes PCM runtimes during ASoC teardown. This deletes the RTDs that contain the q6apm DAI components before their removal pass runs, leaving those components still linked to the card and causing crashes on the next rebind. Fix this by ensuring that all dependent (child) components are removed first, and the q6apm component is removed last. [ 48.105720] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [ 48.114763] Mem abort info: [ 48.117650] ESR = 0x0000000096000004 [ 48.121526] EC = 0x25: DABT (current EL), IL = 32 bits [ 48.127010] SET = 0, FnV = 0 [ 48.130172] EA = 0, S1PTW = 0 [ 48.133415] FSC = 0x04: level 0 translation fault [ 48.138446] Data abort info: [ 48.141422] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 48.147079] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 48.152354] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 48.157859] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001173cf000 [ 48.164517] [00000000000000d0] pgd=0000000000000000, p4d=0000000000000000 [ 48.171530] Internal error: Oops: 0000000096000004 [#1] SMP [ 48.177348] Modules linked in: q6prm_clocks q6apm_lpass_dais q6apm_dai snd_q6dsp_common q6prm snd_q6apm 8021q garp mrp stp llc snd_soc_hdmi_codec apr pdr_interface phy_qcom_edp fastrpc qcom_pd_mapper rpmsg_ctrl qrtr_smd rpmsg_char qcom_pdr_msg qcom_iris v4l2_mem2mem videobuf2_dma_contig ath11k_pci msm ubwc_config at24 ath11k videobuf2_memops mac80211 ocmem videobuf2_v4l2 libarc4 drm_gpuvm mhi qrtr videodev drm_exec snd_soc_sc8280xp gpu_sched videobuf2_common nvmem_qcom_spmi_sdam snd_soc_qcom_sdw drm_dp_aux_bus qcom_q6v5_pas qcom_spmi_temp_alarm snd_soc_qcom_common rtc_pm8xxx qcom_pon drm_display_helper cec qcom_pil_info qcom_stats soundwire_bus drm_client_lib mc dispcc0_sa8775p videocc_sa8775p qcom_q6v5 camcc_sa8775p snd_soc_dmic phy_qcom_sgmii_eth snd_soc_max98357a i2c_qcom_geni snd_soc_core dwmac_qcom_ethqos llcc_qcom icc_bwmon qcom_sysmon snd_compress qcom_refgen_regulator coresight_stm stmmac_platform snd_pcm_dmaengine qcom_common coresight_tmc stmmac coresight_replicator qcom_glink_smem coresight_cti stm_core [ 48.177444] coresight_funnel snd_pcm ufs_qcom phy_qcom_qmp_usb gpi phy_qcom_snps_femto_v2 coresight phy_qcom_qmp_ufs qcom_wdt gpucc_sa8775p pcs_xpcs mdt_loader qcom_ice icc_osm_l3 qmi_helpers snd_timer snd soundcore display_connector qcom_rng nvmem_reboot_mode drm_kms_helper phy_qcom_qmp_pcie sha256 cfg80211 rfkill socinfo fuse drm backlight ipv6 [ 48.301059] CPU: 2 UID: 0 PID: 293 Comm: kworker/u32:2 Not tainted 6.19.0-rc6-dirty #10 PREEMPT [ 48.310081] Hardware name: Qualcomm Technologies, Inc. Lemans EVK (DT) [ 48.316782] Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] [ 48.323672] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 48.330825] pc : mutex_lock+0xc/0x54 [ 48.334514] lr : soc_dapm_shutdown_dapm+0x44/0x174 [snd_soc_core] [ 48.340794] sp : ffff800084ddb7b0 [ 48.344207] x29: ffff800084ddb7b0 x28: ffff00009cd9cf30 x27: ffff00009cd9cc00 [ 48.351544] x26: ffff000099610190 x25: ffffa31d2f19c810 x24: ffffa31d2f185098 [ 48.358869] x23: ffff800084ddb7f8 x22: 0000000000000000 x21: 00000000000000d0 [ 48.366198] x20: ffff00009ba6c338 x19: ffff00009ba6c338 x18: 00000000ffffffff [ 48.373528] x17: 000000040044ffff x16: ffffa31d4ae6dca8 x15: 072007740775076f [ 48.380853] x14: 0765076d07690774 x13: 00313a323a656369 x12: 767265733a637673 [ 48.388182] x11: 00000000000003f9 x10: ffffa31d4c7dea98 x9 : 0000000000000001 [ 48.395519] x8 : ffff00009a2aadc0 x7 : 0000000000000003 x6 : 0000000000000000 [ 48.402854] x5 : 0000000000000 ---truncated---

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43420

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: ceph: fix i_nlink underrun during async unlink During async unlink, we drop the `i_nlink` counter before we receive the completion (that will eventually update the `i_nlink`) because "we assume that the unlink will succeed". That is not a bad idea, but it races against deletions by other clients (or against the completion of our own unlink) and can lead to an underrun which emits a WARNING like this one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655 Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drop_nlink+0x50/0x68 lr : ceph_unlink+0x6c4/0x720 sp : ffff80012173bc90 x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680 x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647 x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203 x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365 x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74 x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94 x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002 x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8 Call trace: drop_nlink+0x50/0x68 (P) vfs_unlink+0xb0/0x2e8 do_unlinkat+0x204/0x288 __arm64_sys_unlinkat+0x3c/0x80 invoke_syscall.constprop.0+0x54/0xe8 do_el0_svc+0xa4/0xc8 el0_svc+0x18/0x58 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x154/0x158 In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion. Meanwhile, between this call and the following drop_nlink() call, a worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own completion). These will lead to a set_nlink() call, updating the `i_nlink` counter to the value received from the MDS. If that new `i_nlink` value happens to be zero, it is illegal to decrement it further. But that is exactly what ceph_unlink() will do then. The WARNING can be reproduced this way: 1. Force async unlink; only the async code path is affected. Having no real clue about Ceph internals, I was unable to find out why the MDS wouldn't give me the "Fxr" capabilities, so I patched get_caps_for_async_unlink() to always succeed. (Note that the WARNING dump above was found on an unpatched kernel, without this kludge - this is not a theoretical bug.) 2. Add a sleep call after ceph_mdsc_submit_request() so the unlink completion gets handled by a worker thread before drop_nlink() is called. This guarantees that the `i_nlink` is already zero before drop_nlink() runs. The solution is to skip the counter decrement when it is already zero, but doing so without a lock is still racy (TOCTOU). Since ceph_fill_inode() and handle_cap_grant() both hold the `ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this seems like the proper lock to protect the `i_nlink` updates. I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using `afs_vnode.cb_lock`). All three have the zero check as well.

Published: 2026-05-08Modified: 2026-05-22

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43424

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically managed and tied to userspace configuration via ConfigFS. It can be NULL if the USB host sends requests before the nexus is fully established or immediately after it is dropped. Currently, functions like `bot_submit_command()` and the data transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately dereference `tv_nexus->tvn_se_sess` without any validation. If a malicious or misconfigured USB host sends a BOT (Bulk-Only Transport) command during this race window, it triggers a NULL pointer dereference, leading to a kernel panic (local DoS). This exposes an inconsistent API usage within the module, as peer functions like `usbg_submit_command()` and `bot_send_bad_response()` correctly implement a NULL check for `tv_nexus` before proceeding. Fix this by bringing consistency to the nexus handling. Add the missing `if (!tv_nexus)` checks to the vulnerable BOT command and request processing paths, aborting the command gracefully with an error instead of crashing the system.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43425

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit 372c93131998 ("USB: yurex: fix control-URB timeout handling") - commit b98d5000c505 ("media: rc: iguanair: handle timeouts")

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43426

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43427

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43428

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43429

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43430

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43432

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43436

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces The Scarlett2 mixer quirk in USB-audio driver may hit a NULL dereference when a malformed USB descriptor is passed, since it assumes the presence of an endpoint in the parsed interface in scarlett2_find_fc_interface(), as reported by fuzzer. For avoiding the NULL dereference, just add the sanity check of bNumEndpoints and skip the invalid interface.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43437

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() In the drain loop, the local variable 'runtime' is reassigned to a linked stream's runtime (runtime = s->runtime at line 2157). After releasing the stream lock at line 2169, the code accesses runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size (lines 2170-2178) — all referencing the linked stream's runtime without any lock or refcount protecting its lifetime. A concurrent close() on the linked stream's fd triggers snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private() → snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime). No synchronization prevents kfree(runtime) from completing while the drain path dereferences the stale pointer. Fix by caching the needed runtime fields (no_period_wakeup, rate, buffer_size) into local variables while still holding the stream lock, and using the cached values after the lock is released.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43439

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as well as tasks queued on cset->mg_tasks, can be skipped by iteration. Fix this by calling css_set_skip_task_iters() before unlinking task->cg_list from cset->tasks. This advances all active iterators to the next task on cset->tasks, so iteration continues correctly even when a task is concurrently being migrated. This race is hard to hit in practice without instrumentation, but it can be reproduced by artificially slowing down cgroup_procs_show(). For example, on an Android device a temporary /sys/kernel/cgroup/cgroup_test knob can be added to inject a delay into cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file. Under this setup, cgroup.procs can intermittently show only PID 101 while skipping PID 103. Once the migration completes, reading the file again shows all tasks as expected. Note that this change does not allow removing the existing css_set_skip_task_iters() call in css_set_move_task(). The new call in cgroup_migrate_add_task() only handles iterators that are racing with migration while the task is still on cset->tasks. Iterators may also start after the task has been moved to cset->mg_tasks. If we dropped css_set_skip_task_iters() from css_set_move_task(), such iterators could keep task_pos pointing to a migrating task, causing css_task_iter_advance() to malfunction on the destination css_set, up to and including crashes or infinite loops. The race window between migration and iteration is very small, and css_task_iter is not on a hot path. In the worst case, when an iterator is positioned on the first thread of the migrating process, cgroup_migrate_add_task() may have to skip multiple tasks via css_set_skip_task_iters(). However, this only happens when migration and iteration actually race, so the performance impact is negligible compared to the correctness fix provided here.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43441

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If bonding ARP/NS validation is enabled, an IPv6 NS/NA packet received on a slave can reach bond_validate_na(), which calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can crash in __ipv6_chk_addr_and_flags(). BUG: kernel NULL pointer dereference, address: 00000000000005d8 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170 Call Trace: ipv6_chk_addr+0x1f/0x30 bond_validate_na+0x12e/0x1d0 [bonding] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] bond_rcv_validate+0x1a0/0x450 [bonding] bond_handle_frame+0x5e/0x290 [bonding] ? srso_alias_return_thunk+0x5/0xfbef5 __netif_receive_skb_core.constprop.0+0x3e8/0xe50 ? srso_alias_return_thunk+0x5/0xfbef5 ? update_cfs_rq_load_avg+0x1a/0x240 ? srso_alias_return_thunk+0x5/0xfbef5 ? __enqueue_entity+0x5e/0x240 __netif_receive_skb_one_core+0x39/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x30/0x200 ? srso_alias_return_thunk+0x5/0xfbef5 net_rx_action+0x338/0x3b0 handle_softirqs+0xc9/0x2a0 do_softirq+0x42/0x60 __local_bh_enable_ip+0x62/0x70 __dev_queue_xmit+0x2d3/0x1000 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? packet_parse_headers+0x10a/0x1a0 packet_sendmsg+0x10da/0x1700 ? kick_pool+0x5f/0x140 ? srso_alias_return_thunk+0x5/0xfbef5 ? __queue_work+0x12d/0x4f0 __sys_sendto+0x1f3/0x220 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x101/0xf80 ? exc_page_fault+0x6e/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate() and avoid the path to ipv6_chk_addr().

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43445

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43448

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix race bug in nvme_poll_irqdisable() In the following scenario, pdev can be disabled between (1) and (3) by (2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2). This causes IRQ warning because it tries to enable INTx IRQ that has never been disabled before. To fix this, save IRQ number into a local variable and ensure disable_irq() and enable_irq() operate on the same IRQ number. Even if pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and enable_irq() on a stale IRQ number is still valid and safe, and the depth accounting reamins balanced. task 1: nvme_poll_irqdisable() disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1) enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3) task 2: nvme_reset_work() nvme_dev_disable() pdev->msix_enable = 0; ...(2) crash log: ------------[ cut here ]------------ Unbalanced enable for IRQ 10 WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26 Modules linked in: CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753 Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9 RSP: 0018:ffffc900001bf550 EFLAGS: 00010046 RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90 RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0 RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000 R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293 FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0 Call Trace: enable_irq+0x121/0x1e0 kernel/irq/manage.c:797 nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494 nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744 blk_mq_rq_timed_out block/blk-mq.c:1653 [inline] blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721 bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292 __sbitmap_for_each_set include/linux/sbitmap.h:269 [inline] sbitmap_for_each_set include/linux/sbitmap.h:290 [inline] bt_for_each block/blk-mq-tag.c:324 [inline] blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536 blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 irq event stamp: 74478 hardirqs last enabled at (74477): [] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline] hardirqs last enabled at (74477): [] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202 hardirqs last disabled at (74478): [] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (74478): [] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162 softirqs last enabled at (74304): [] __do_softirq kernel/softirq.c:656 [inline] softirqs last enabled at (74304): [] invoke_softirq kernel/softirq.c:496 [inline] softirqs last enabled at (74304): [] __irq_exit_rcu+0xdc/0x120 ---truncated---

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43449

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff) page_type: f5(slab) raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 000fffffc0000040 ffff888001042000 00000 ---truncated---

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43450

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43451

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue entry from the queue data structures, taking ownership of the entry. For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN present but NFQA_VLAN_TCI missing), the function returns immediately without freeing the dequeued entry or its sk_buff. This leaks the nf_queue_entry, its associated sk_buff, and all held references (net_device refcounts, struct net refcount). Repeated triggering exhausts kernel memory. Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict on the error path, consistent with other error handling in this file.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43452

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: guard option walkers against 1-byte tail reads When the last byte of options is a non-single-byte option kind, walkers that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end of the option area. Add an explicit i == optlen - 1 check before dereferencing op[i + 1] in xt_tcpudp and xt_dccp option walkers.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H

References

CVE-2026-43453

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid the out-of-bounds read.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43455

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB references were acquired, but only the final key->dev value is tracked for release. One reference can be lost, causing a resource leak as mctp_dev_release_key() would only decrease the reference on one dev. Fix by taking key->lock around the key->dev check and mctp_dev_set_key() call.

Published: 2026-05-08Modified: 2026-05-20

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43457

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mctp: i2c: fix skb memory leak in receive path When 'midev->allow_rx' is false, the newly allocated skb isn't consumed by netif_rx(), it needs to free the skb directly.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43458

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: serial: caif: hold tty->link reference in ldisc_open and ser_release A reproducer triggers a KASAN slab-use-after-free in pty_write_room() when caif_serial's TX path calls tty_write_room(). The faulting access is on tty->link->port. Hold an extra kref on tty->link for the lifetime of the caif_serial line discipline: get it in ldisc_open() and drop it in ser_release(), and also drop it on the ldisc_open() error path. With this change applied, the reproducer no longer triggers the UAF in my testing.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43459

HIGH7.3

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: flush delayed work before removing DAIs and widgets When a sound card is unbound while a PCM stream is open, a use-after-free can occur in snd_soc_dapm_stream_event(), called from the close_delayed_work workqueue handler. During unbind, snd_soc_unbind_card() flushes delayed work and then calls soc_cleanup_card_resources(). Inside cleanup, snd_card_disconnect_sync() releases all PCM file descriptors, and the resulting PCM close path can call snd_soc_dapm_stream_stop() which schedules new delayed work with a pmdown_time timer delay. Since this happens after the flush in snd_soc_unbind_card(), the new work is not caught. soc_remove_link_components() then frees DAPM widgets before this work fires, leading to the use-after-free. The existing flush in soc_free_pcm_runtime() also cannot help as it runs after soc_remove_link_components() has already freed the widgets. Add a flush in soc_cleanup_card_resources() after snd_card_disconnect_sync() (after which no new PCM closes can schedule further delayed work) and before soc_remove_link_dais() and soc_remove_link_components() (which tear down the structures the delayed work accesses).

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.3

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H

References

CVE-2026-43466

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 asm_common_interrupt+0x22/0x40

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H

References

CVE-2026-43468

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix deadlock between devlink lock and esw->wq esw->work_queue executes esw_functions_changed_event_handler -> esw_vfs_changed_event_handler and acquires the devlink lock. .eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) -> mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked -> mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlocks when esw_vfs_changed_event_handler executes. Fix that by no longer flushing the work to avoid the deadlock, and using a generation counter to keep track of work relevance. This avoids an old handler manipulating an esw that has undergone one or more mode changes: - the counter is incremented in mlx5_eswitch_event_handler_unregister. - the counter is read and passed to the ephemeral mlx5_host_work struct. - the work handler takes the devlink lock and bails out if the current generation is different than the one it was scheduled to operate on. - mlx5_eswitch_cleanup does the final draining before destroying the wq. No longer flushing the workqueue has the side effect of maybe no longer cancelling pending vport_change_handler work items, but that's ok since those are disabled elsewhere: - mlx5_eswitch_disable_locked disables the vport eq notifier. - mlx5_esw_vport_disable disarms the HW EQ notification and marks vport->enabled under state_lock to false to prevent pending vport handler from doing anything. - mlx5_eswitch_cleanup destroys the workqueue and makes sure all events are disabled/finished.

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43469

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decrement re_receiving on the early exit paths In the event that rpcrdma_post_recvs() fails to create a work request (due to memory allocation failure, say) or otherwise exits early, we should decrement ep->re_receiving before returning. Otherwise we will hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and the completion will never be triggered. On a system with high memory pressure, this can appear as the following hung task: INFO: task kworker/u385:17:8393 blocked for more than 122 seconds. Tainted: G S E 6.19.0 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000 Workqueue: xprtiod xprt_autoclose [sunrpc] Call Trace: __schedule+0x48b/0x18b0 ? ib_post_send_mad+0x247/0xae0 [ib_core] schedule+0x27/0xf0 schedule_timeout+0x104/0x110 __wait_for_common+0x98/0x180 ? __pfx_schedule_timeout+0x10/0x10 wait_for_completion+0x24/0x40 rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma] xprt_rdma_close+0x12/0x40 [rpcrdma] xprt_autoclose+0x5f/0x120 [sunrpc] process_one_work+0x191/0x3e0 worker_thread+0x2e3/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x10d/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x273/0x2b0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43472

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: unshare: fix unshare_fs() handling There's an unpleasant corner case in unshare(2), when we have a CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that case copy_mnt_ns() gets passed current->fs instead of a private copy, which causes interesting warts in proof of correctness] > I guess if private means fs->users == 1, the condition could still be true. Unfortunately, it's worse than just a convoluted proof of correctness. Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS (and current->fs->users == 1). We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and flips current->fs->{pwd,root} to corresponding locations in the new namespace. Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM). We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's destroyed and its mount tree is dissolved, but... current->fs->root and current->fs->pwd are both left pointing to now detached mounts. They are pinning those, so it's not a UAF, but it leaves the calling process with unshare(2) failing with -ENOMEM _and_ leaving it with pwd and root on detached isolated mounts. The last part is clearly a bug. There is other fun related to that mess (races with pivot_root(), including the one between pivot_root() and fork(), of all things), but this one is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new fs_struct even if it hadn't been shared in the first place". Sure, we could go for something like "if both CLONE_NEWNS and one of the things that might end up failing after copy_mnt_ns() call in create_new_namespaces() are set, force allocation of new fs_struct", but let's keep it simple - the cost of copy_fs_struct() is trivial. Another benefit is that copy_mnt_ns() with CLONE_NEWNS always gets a freshly allocated fs_struct, yet to be attached to anything. That seriously simplifies the analysis... FWIW, that bug had been there since the introduction of unshare(2) ;-/

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43473

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Add NULL checks when resetting request and reply queues The driver encountered a crash during resource cleanup when the reply and request queues were NULL due to freed memory. This issue occurred when the creation of reply or request queues failed, and the driver freed the memory first, but attempted to mem set the content of the freed memory, leading to a system crash. Add NULL pointer checks for reply and request queues before accessing the reply/request memory during cleanup

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43475

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT This resolves the follow splat and lock-up when running with PREEMPT_RT enabled on Hyper-V: [ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002 [ 415.140822] INFO: lockdep is turned off. [ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common [ 415.140846] Preemption disabled at: [ 415.140847] [] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)} [ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024 [ 415.140857] Call Trace: [ 415.140861] [ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140863] dump_stack_lvl+0x91/0xb0 [ 415.140870] __schedule_bug+0x9c/0xc0 [ 415.140875] __schedule+0xdf6/0x1300 [ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980 [ 415.140879] ? rcu_is_watching+0x12/0x60 [ 415.140883] schedule_rtlock+0x21/0x40 [ 415.140885] rtlock_slowlock_locked+0x502/0x1980 [ 415.140891] rt_spin_lock+0x89/0x1e0 [ 415.140893] hv_ringbuffer_write+0x87/0x2a0 [ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0 [ 415.140900] ? rcu_is_watching+0x12/0x60 [ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc] [ 415.140904] ? HARDIRQ_verbose+0x10/0x10 [ 415.140908] ? __rq_qos_issue+0x28/0x40 [ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod] [ 415.140926] __blk_mq_issue_directly+0x4a/0xc0 [ 415.140928] blk_mq_issue_direct+0x87/0x2b0 [ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440 [ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0 [ 415.140935] __blk_flush_plug+0xf4/0x150 [ 415.140940] __submit_bio+0x2b2/0x5c0 [ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360 [ 415.140946] submit_bio_noacct_nocheck+0x272/0x360 [ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4] [ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4] [ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4] [ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4] [ 415.141060] generic_perform_write+0x14e/0x2c0 [ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4] [ 415.141083] vfs_write+0x2ca/0x570 [ 415.141087] ksys_write+0x76/0xf0 [ 415.141089] do_syscall_64+0x99/0x1490 [ 415.141093] ? rcu_is_watching+0x12/0x60 [ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0 [ 415.141097] ? rcu_is_watching+0x12/0x60 [ 415.141098] ? lock_release+0x1f0/0x2a0 [ 415.141100] ? rcu_is_watching+0x12/0x60 [ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0 [ 415.141103] ? rcu_is_watching+0x12/0x60 [ 415.141104] ? __schedule+0xb34/0x1300 [ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170 [ 415.141109] ? do_nanosleep+0x8b/0x160 [ 415.141111] ? hrtimer_nanosleep+0x89/0x100 [ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 415.141116] ? xfd_validate_state+0x26/0x90 [ 415.141118] ? rcu_is_watching+0x12/0x60 [ 415.141120] ? do_syscall_64+0x1e0/0x1490 [ 415.141121] ? do_syscall_64+0x1e0/0x1490 [ 415.141123] ? rcu_is_watching+0x12/0x60 [ 415.141124] ? do_syscall_64+0x1e0/0x1490 [ 415.141125] ? do_syscall_64+0x1e0/0x1490 [ 415.141127] ? irqentry_exit+0x140/0 ---truncated---

Published: 2026-05-08Modified: 2026-05-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

Package update kernel-image-un-def in branch p10

Closed issues (176)

Уязвимость функции dvb_ringbuffer_init() модуля drivers/media/dvb-core/dmxdev.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции act_gate() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции acpi_processor_errata_piix4() ядра операционной системы Linux, позволяющая нарушителю вызвать повреждение памяти

Уязвимость функции icmp_tag_validation() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента ksmbd ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации

Уязвимость компонента NFSv4.0 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента sunrpc ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента NFSD ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции nd_async_device_register() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leaks on common probe Make sure to drop the reference taken when looking up the SMI device during common probe on late probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup() Reset eBPF program pointer to old_prog and do not decrease its ref-count if mtk_open routine in mtk_xdp_setup() fails.

In the Linux kernel, the following vulnerability has been resolved: IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq() Fix a user triggerable leak on the system call failure path.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Compare MACs in constant time To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq().

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Fix a locking bug Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix OOM ->tfm_count leak If memory allocation fails, decrement ->tfm_count to avoid blocking future reads.

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is dereferenced after rcu_read_unlock(), creating a use-after-free window.

In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

In the Linux kernel, the following vulnerability has been resolved: mctp: i2c: fix skb memory leak in receive path When 'midev->allow_rx' is false, the newly allocated skb isn't consumed by netif_rx(), it needs to free the skb directly.