ALT-PU-2026-9920-12 — kernel-image-7.0

BDU:2026-06785

HIGH7.8

Уязвимость функции skb_try_coalesce() ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии

Published: 2026-05-13Modified: 2026-08-04

CVSS 3.xHIGH 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

References

BDU:2026-07273

HIGH7.8

Уязвимость реализации сетевого протокола RDS ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии и вызвать отказ в обслуживании

Published: 2026-05-24Modified: 2026-08-04

CVSS 3.xHIGH 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0

CVSS:2.0/AV:L/AC:M/Au:N/C:C/I:C/A:C

References

BDU:2026-08879

HIGH8.8

Уязвимость сетевого компонента skbuff ядра операционных систем Linux, позволяющая нарушителю повысить свои привилегии

Published: 2026-06-28Modified: 2026-08-04

CVSS 3.xHIGH 8.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

References

BDU:2026-09232

HIGH7.8

Уязвимость функции ep_remove() ядра операционных систем Linux, позволяющая нарушителю выполнить произвольный код

Published: 2026-07-05Modified: 2026-08-03

CVSS 3.xHIGH 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

References

BDU:2026-09714

HIGH7.0

Уязвимость компонента drivers/net/ppp/ppp_generic.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-07-14Modified: 2026-08-03

CVSS 3.xHIGH 7.0

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.0

CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C

References

CVE-2026-43494

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user().

Published: 2026-05-21Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43503

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to ' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.

Published: 2026-05-23Modified: 2026-07-23

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-45838

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: fix end-of-list detection in cgroup_storage_get_next_key() list_next_entry() never returns NULL -- when the current element is the last entry it wraps to the list head via container_of(). The subsequent NULL check is therefore dead code and get_next_key() never returns -ENOENT for the last element, instead reading storage->key from a bogus pointer that aliases internal map fields and copying the result to userspace. Replace it with list_entry_is_head() so the function correctly returns -ENOENT when there are no more entries.

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-45839

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec() CO-RE accessor strings are colon-separated indices that describe a path from a root BTF type to a target field, e.g. "0:1:2" walks through nested struct members. bpf_core_parse_spec() parses each component with sscanf("%d"), so negative values like -1 are silently accepted. The subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the upper bound and always pass for negative values because C integer promotion converts the __u16 btf_vlen result to int, making the comparison (int)(-1) >= (int)(N) false for any positive N. When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff, producing an out-of-bounds read far past the members array. A crafted BPF program with a negative CO-RE accessor on any struct that exists in vmlinux BTF (e.g. task_struct) crashes the kernel deterministically during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y (default on major distributions). The bug is reachable with CAP_BPF: BUG: unable to handle page fault for address: ffffed11818b6626 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full) RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354) RAX: 00000000ffffffff Call Trace: bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321) bpf_core_apply (kernel/bpf/btf.c:9507) check_core_relo (kernel/bpf/verifier.c:19475) bpf_check (kernel/bpf/verifier.c:26031) bpf_prog_load (kernel/bpf/syscall.c:3089) __sys_bpf (kernel/bpf/syscall.c:6228) CO-RE accessor indices are inherently non-negative (struct member index, array element index, or enumerator index), so reject them immediately after parsing.

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-45840

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: openvswitch: cap upcall PID array size and pre-size vport replies The vport netlink reply helpers allocate a fixed-size skb with nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID array via ovs_vport_get_upcall_portids(). Since ovs_vport_set_upcall_portids() accepts any non-zero multiple of sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID array large enough to overflow the reply buffer, causing nla_put() to fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with unprivileged user namespaces enabled (e.g., Ubuntu default), this is reachable via unshare -Urn since OVS vport mutation operations use GENL_UNS_ADMIN_PERM. kernel BUG at net/openvswitch/datapath.c:2414! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1 RIP: 0010:ovs_vport_cmd_set+0x34c/0x400 Call Trace: genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116) genl_rcv_msg (net/netlink/genetlink.c:1194) netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Kernel panic - not syncing: Fatal exception Reject attempts to set more PIDs than nr_cpu_ids in ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply size in ovs_vport_cmd_msg_size() based on that bound, similar to the existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already used by the per-CPU dispatch configuration on the datapath side (ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the two sides stay consistent.

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-45841

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO nf_osf_match_one() computes ctx->window % f->wss.val in the OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a subsequent matching TCP SYN divides by zero and panics the kernel. Reject the bogus fingerprint in nfnl_osf_add_callback() above the per-option for-loop. f->wss is per-fingerprint, not per-option, so the check must run regardless of f->opt_num (including 0). Also reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that as "should not happen". Crash: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: nf_osf_match (net/netfilter/nfnetlink_osf.c:220) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:348) nf_hook_slow (net/netfilter/core.c:622) ip_local_deliver (net/ipv4/ip_input.c:265) ip_rcv (include/linux/skbuff.h:1162) __netif_receive_skb_one_core (net/core/dev.c:6181) process_backlog (net/core/dev.c:6642) __napi_poll (net/core/dev.c:7710) net_rx_action (net/core/dev.c:7945) handle_softirqs (kernel/softirq.c:622)

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-45842

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: slip: reject VJ receive packets on instances with no rstate array slhc_init() accepts rslots == 0 as a valid configuration, with the documented meaning of 'no receive compression'. In that case the allocation loop in slhc_init() is skipped, so comp->rstate stays NULL and comp->rslot_limit stays 0 (from the kzalloc of struct slcompress). The receive helpers do not defend against that configuration. slhc_uncompress() dereferences comp->rstate[x] when the VJ header carries an explicit connection ID, and slhc_remember() later assigns cs = &comp->rstate[...] after only comparing the packet's slot number to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the range check, and the code dereferences a NULL rstate. The configuration is reachable in-tree through PPP. PPPIOCSMAXCID stores its argument in a signed int, and (val >> 16) uses arithmetic shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1 is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because /dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path is reachable from an unprivileged user namespace. Once the malformed VJ state is installed, any inbound VJ-compressed or VJ-uncompressed frame that selects slot 0 crashes the kernel in softirq context: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519) Call Trace: ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466) ppp_input (drivers/net/ppp/ppp_generic.c:2359) ppp_async_process (drivers/net/ppp/ppp_async.c:492) tasklet_action_common (kernel/softirq.c:926) handle_softirqs (kernel/softirq.c:623) run_ksoftirqd (kernel/softirq.c:1055) smpboot_thread_fn (kernel/smpboot.c:160) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) Reject the receive side on such instances instead of touching rstate. slhc_uncompress() falls through to its existing 'bad' label, which bumps sls_i_error and enters the toss state. slhc_remember() mirrors that with an explicit sls_i_error increment followed by slhc_toss(); the sls_i_runt counter is not used here because a missing rstate is an internal configuration state, not a runt packet. The transmit path is unaffected: the only in-tree caller that picks rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and slip.c always calls slhc_init(16, 16), so comp->tstate remains valid and slhc_compress() continues to work.

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-45843

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: slip: bound decode() reads against the compressed packet length slhc_uncompress() parses a VJ-compressed TCP header by advancing a pointer through the packet via decode() and pull16(). Neither helper bounds-checks against isize, and decode() masks its return with & 0xffff so it can never return the -1 that callers test for -- those error paths are dead code. A short compressed frame whose change byte requests optional fields lets decode() read past the end of the packet. The over-read bytes are folded into the cached cstate and reflected into subsequent reconstructed packets. Make decode() and pull16() take the packet end pointer and return -1 when exhausted. Add a bounds check before the TCP-checksum read. The existing == -1 tests now do what they were always meant to.

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xHIGH 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N

References

CVE-2026-45844

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target IP address. This causes arptables rules to match against garbage data, leading to incorrect filtering decisions: packets that should be accepted may be dropped and vice versa. The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already handles this correctly by skipping the target hardware address for ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()." Mangle the original patch to always return 0 (no match) in case user matches on the target hardware address which is never present in IEEE1394. Note that this returns 0 (no match) for either normal and inverse match because matching in the target hardware address in ARPHRD_IEEE1394 has never been supported by arptables. This is intentional, matching on the target hardware address should never evaluate true for ARPHRD_IEEE1394. Moreover, adjust arpt_mangle to drop the packet too as AI suggests: In arpt_mangle, the logic assumes a standard ARP layout. Because IEEE1394 (FireWire) omits the target hardware address, the linear pointer arithmetic miscalculates the offset for the target IP address. This causes mangling operations to write to the wrong location, leading to packet corruption. To ensure safety, this patch drops packets (NF_DROP) when mangling is requested for these fields on IEEE1394 devices, as the current implementation cannot correctly map the FireWire ARP payload. This omits both mangling target hardware and IP address. Even if IP address mangling should be possible in IEEE1394, this would require to adjust arpt_mangle offset calculation, which has never been supported. Based on patch from Weiming Shi .

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-45845

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix NULL pointer dereference in class dump When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft() is called with new == NULL and stores NULL into q->qdiscs[cl - 1]. Subsequent RTM_GETTCLASS dump operations walk all classes via taprio_walk() and call taprio_dump_class(), which calls taprio_leaf() returning the NULL pointer, then dereferences it to read child->handle, causing a kernel NULL pointer dereference. The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user namespaces enabled, an unprivileged local user can trigger a kernel panic by creating a taprio qdisc inside a new network namespace, grafting an explicit child qdisc, deleting it, and requesting a class dump. The RTM_GETTCLASS dump itself requires no capability. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000007: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:taprio_dump_class (net/sched/sch_taprio.c:2478) Call Trace: tc_fill_tclass (net/sched/sch_api.c:1966) qdisc_class_dump (net/sched/sch_api.c:2326) taprio_walk (net/sched/sch_taprio.c:2514) tc_dump_tclass_qdisc (net/sched/sch_api.c:2352) tc_dump_tclass_root (net/sched/sch_api.c:2370) tc_dump_tclass (net/sched/sch_api.c:2431) rtnl_dumpit (net/core/rtnetlink.c:6864) netlink_dump (net/netlink/af_netlink.c:2325) rtnetlink_rcv_msg (net/core/rtnetlink.c:6959) netlink_rcv_skb (net/netlink/af_netlink.c:2550) Fix this by substituting &noop_qdisc when new is NULL in taprio_graft(), a common pattern used by other qdiscs (e.g., multiq_graft()) to ensure the q->qdiscs[] slots are never NULL. This makes control-plane dump paths safe without requiring individual NULL checks. Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq) previously had explicit NULL guards that would drop/skip the packet cleanly, update those checks to test for &noop_qdisc instead. Without this, packets would reach taprio_enqueue_one() which increments the root qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc drops the packet but those counters are never rolled back, permanently inflating the root qdisc's statistics. After this change old can be a valid qdisc, NULL, or &noop_qdisc. Only call qdisc_put(old) in the first case to avoid decreasing noop_qdisc's refcount, which was never increased.

Published: 2026-05-27Modified: 2026-06-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-45846

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst() bareudp_fill_metadata_dst() passes bareudp->sock to udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check. The socket is only created in bareudp_open() and NULLed in bareudp_stop(), so calling this function while the device is down triggers a NULL dereference via sock->sk. BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160) Call Trace: bareudp_fill_metadata_dst (drivers/net/bareudp.c:532) do_execute_actions (net/openvswitch/actions.c:901) ovs_execute_actions (net/openvswitch/actions.c:1589) ovs_packet_cmd_execute (net/openvswitch/datapath.c:700) genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1209) netlink_rcv_skb (net/netlink/af_netlink.c:2550) Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths in the same driver.

Published: 2026-05-27Modified: 2026-06-25

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-46242

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: eventpoll: fix ep_remove struct eventpoll / struct file UAF ep_remove() (via ep_remove_file()) cleared file->f_ep under file->f_lock but then kept using @file inside the critical section (is_file_epoll(), hlist_del_rcu() through the head, spin_unlock). A concurrent __fput() taking the eventpoll_release() fastpath in that window observed the transient NULL, skipped eventpoll_release_file() and ran to f_op->release / file_free(). For the epoll-watches-epoll case, f_op->release is ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which kfree()s the watched struct eventpoll. Its embedded ->refs hlist_head is exactly where epi->fllink.pprev points, so the subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed kmalloc-192 memory. In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot backing @file could be recycled by alloc_empty_file() -- reinitializing f_lock and f_ep -- while ep_remove() is still nominally inside that lock. The upshot is an attacker-controllable kmem_cache_free() against the wrong slab cache. Pin @file via epi_fget() at the top of ep_remove() and gate the critical section on the pin succeeding. With the pin held @file cannot reach refcount zero, which holds __fput() off and transitively keeps the watched struct eventpoll alive across the hlist_del_rcu() and the f_lock use, closing both UAFs. If the pin fails @file has already reached refcount zero and its __fput() is in flight. Because we bailed before clearing f_ep, that path takes the eventpoll_release() slow path into eventpoll_release_file() and blocks on ep->mtx until the waiter side's ep_clear_and_put() drops it. The bailed epi's share of ep->refcount stays intact, so the trailing ep_refcount_dec_and_test() in ep_clear_and_put() cannot free the eventpoll out from under eventpoll_release_file(); the orphaned epi is then cleaned up there. A successful pin also proves we are not racing eventpoll_release_file() on this epi, so drop the now-redundant re-check of epi->dying under f_lock. The cheap lockless READ_ONCE(epi->dying) fast-path bailout stays.

Published: 2026-05-30Modified: 2026-07-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-46274

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: io-wq: check that the predecessor is hashed in io_wq_remove_pending() io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled work was the tail of its hash bucket. When doing this, it checks whether the preceding entry in acct->work_list has the same hash value, but never checks that the predecessor is hashed at all. io_get_work_hash() is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash bits are never set for non-hashed work, so it returns 0. Thus, when a hashed bucket-0 work is cancelled while a non-hashed work is its list predecessor, the check spuriously passes and a pointer to the non-hashed io_kiocb is stored in wq->hash_tail[0]. Because non-hashed work is dequeued via the fast path in io_get_next_work(), which never touches hash_tail[], the stale pointer is never cleared. Therefore, after the non-hashed io_kiocb completes and is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The io_wq is per-task (tctx->io_wq) and survives ring open/close, so the dangling pointer persists for the lifetime of the task; the next hashed bucket-0 enqueue dereferences it in io_wq_insert_work() and wq_list_add_after() writes through freed memory. Add the missing io_wq_is_hashed() check so a non-hashed predecessor never inherits a hash_tail[] slot.

Published: 2026-06-08Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-46300

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors.

Published: 2026-05-23Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-46319

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: Only release RCU read lock after ct_ft When looking up a flow table in act_ct in tcf_ct_flow_table_get(), rhashtable_lookup_fast() internally opens and closes an RCU read critical section before returning ct_ft. The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero() is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft object. This vulnerability can lead to privilege escalation. Analysis from zdi-disclosures@trendmicro.com: When initializing act_ct, tcf_ct_init() is called, which internally triggers tcf_ct_flow_table_get(). static int tcf_ct_flow_table_get(struct net net, struct tcf_ct_params params) { struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ... } static __always_inline void rhashtable_lookup_fast( struct rhashtable ht, const void key, const struct rhashtable_params params) { void obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj; } At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft from zones_ht . The lookup is performed within an RCU read critical section through rcu_read_lock() / rcu_read_unlock(), which prevents the object from being freed. However, at the point of function return, rcu_read_unlock() has already been called, and there is nothing preventing ct_ft from being freed before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes the race window, during which ct_ft can be freed. Free Process: tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu() tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put(). static void tcf_ct_flow_table_put(struct tcf_ct_flow_table ct_ft) { if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); } } At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work static void tcf_ct_flow_table_cleanup_work(struct work_struct work) { struct tcf_ct_flow_table ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE); } tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes between [1] and [2], UAF occurs. This race condition has a very short race window, making it generally difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was inserted after[1]

Published: 2026-06-09Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-46324

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: use list_del_rcu for netlink hooks nft_netdev_unregister_hooks and __nft_unregister_flowtable_net_hooks need to use list_del_rcu(), this list can be walked by concurrent dumpers. Add a new helper and use it consistently.

Published: 2026-06-09Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52911

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope conn->binding slowpath to bound sessions only When the binding SESSION_SETUP sets conn->binding = true, the flag stays set after the call so that the global session lookup in ksmbd_session_lookup_all() can find the session, which was not added to conn->sessions. Because the flag is connection-wide, the global lookup path will also resolve any other session by id if asked. Tighten the global lookup so that the returned session must have this connection registered in its channel xarray (sess->ksmbd_chann_list). The channel entry is installed by the existing binding_session path in ntlm_authenticate()/krb5_authenticate() when a SESSION_SETUP completes successfully, so this condition is a strict equivalent of "this connection has been accepted as a channel of this session". Connections that have not bound to a given session cannot reach it via the global table. The existing conn->binding gate for entering the slowpath is preserved so that non-binding connections keep the fast-path-only behavior, and the session->state check is unchanged.

Published: 2026-06-21Modified: 2026-07-08

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52920

HIGH8.3

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_policy: fix strict mode inbound policy matching match_policy_in() walks sec_path entries from the last transform to the first one, but strict policy matching needs to consume info->pol[] in the same forward order as the rule layout. Derive the strict-match policy position from the number of transforms already consumed so that multi-element inbound rules are matched consistently.

Published: 2026-06-24Modified: 2026-07-08

CVSS 3.xHIGH 8.3

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:H

References

CVE-2026-52925

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vrf: Fix a potential NPD when removing a port from a VRF RCU readers that identified a net device as a VRF port using netif_is_l3_slave() assume that a subsequent call to netdev_master_upper_dev_get_rcu() will return a VRF device. They then continue to dereference its l3mdev operations. This assumption is not always correct and can result in a NPD [1]. There is no RCU synchronization when removing a port from a VRF, so it is possible for an RCU reader to see a new master device (e.g., a bridge) that does not have l3mdev operations. Fix by adding RCU synchronization after clearing the IFF_L3MDEV_SLAVE flag. Skip this synchronization when a net device is removed from a VRF as part of its deletion and when the VRF device itself is deleted. In the latter case an RCU grace period will pass by the time RTNL is released. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:l3mdev_fib_table_rcu (net/l3mdev/l3mdev.c:181) [...] Call Trace: l3mdev_fib_table_by_index (net/l3mdev/l3mdev.c:201 net/l3mdev/l3mdev.c:189) __inet_bind (net/ipv4/af_inet.c:499 (discriminator 3)) inet_bind_sk (net/ipv4/af_inet.c:469) __sys_bind (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:1951 (discriminator 1)) __x64_sys_bind (net/socket.c:1969 (discriminator 1) net/socket.c:1967 (discriminator 1) net/socket.c:1967 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

Published: 2026-06-24Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52936

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: jitterentropy - replace long-held spinlock with mutex jent_kcapi_random() serializes the shared jitterentropy state, but it currently holds a spinlock across the jent_read_entropy() call. That path performs expensive jitter collection and SHA3 conditioning, so parallel readers can trigger stalls as contending waiters spin for the same lock. To prevent non-preemptible lock hold, replace rng->jent_lock with a mutex so contended readers sleep instead of spinning on a shared lock held across expensive entropy generation.

Published: 2026-06-24Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52949

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure") to the ttm_bo_shrink() path. Move del_bulk_move from before the backup to after success only, using ttm_resource_del_bulk_move_unevictable() since the resource is now unevictable once fully backed up.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52950

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7)

Published: 2026-06-24Modified: 2026-07-27

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52951

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: handle empty bo and UAF races There look to be some nasty races here when triggering the invalidate_mappings hook: 1) We do xe_bo_alloc() followed by the attach, before the actual full bo init step in xe_dma_buf_init_obj(). However the bo is visible on the attachments list after the attach. This is bad since exporter driver, say amdgpu, can at any time call back into our invalidate_mappings hook, with an empty/bogus bo, leading to potential bugs/crashes. 2) Similar to 1) but here we get a UAF, when the invalidate_mappings hook is triggered. For example, we get as far as xe_bo_init_locked() but this fails in some way. But here the bo will be freed on error, but we still have it attached from dma-buf pov, so if the invalidate_mappings is now triggered then the bo we access is gone and we trigger UAF and more bugs/crashes. To fix this, move the attach step until after we actually have a fully set up buffer object. Note that the bo is not published to userspace until later, so not sure what the comment "Don't publish the bo until we have a valid attachment", is referring to. We have at least two different customers reporting hitting a NULL ptr deref in evict_flags when importing something from amdgpu, followed by triggering the evict flow. Hit rate is also pretty low, which would hint at some kind of race, so something like 1) or 2) might explain this. v2: - Shuffle the order of the ops slightly (no functional change) - Improve the comment to better explain the ordering (Matt B) (cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971)

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52952

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset In __iommu_group_set_domain_internal(), concurrent domain attachments are rejected when any device in the group is recovering. This is necessary to fence concurrent attachments to a multi-device group where devices might share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in __iommu_group_set_domain_nofail(). Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should not be rejected, as the domain would be freed anyway in these nofail paths while group->domain is still pointing to it. So pci_dev_reset_iommu_done() could trigger a UAF when re-attaching group->domain. Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through the group->recovery_cnt fence, so as to update the group->domain pointer. Instead add a gdev->blocked check in the device iteration loop, to prevent any concurrent per-device detachment.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-52953

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix oops due to out of scope access Below oops triggers when kill QEMU process: Oops: general protection fault, probably for non-canonical address 0x7fffffff844eaaa7: 0000 [#1] SMP NOPTI Call Trace: do_raw_spin_lock+0xaa/0xc0 _raw_spin_lock_irqsave+0x21/0x40 domain_remove_dev_pasid+0x52/0x160 intel_nested_set_dev_pasid+0x1b9/0x1e0 __iommu_set_group_pasid+0x56/0x120 pci_dev_reset_iommu_done+0xe3/0x180 pcie_flr+0x65/0x160 __pci_reset_function_locked+0x5b/0x120 vfio_pci_core_close_device+0x63/0xe0 [vfio_pci_core] vfio_df_close+0x4f/0xa0 vfio_df_unbind_iommufd+0x2d/0x60 vfio_device_fops_release+0x3e/0x40 __fput+0xe5/0x2c0 task_work_run+0x58/0xa0 do_exit+0x2c8/0x600 do_group_exit+0x2f/0xa0 get_signal+0x863/0x8c0 arch_do_signal_or_restart+0x24/0x100 exit_to_user_mode_loop+0x87/0x380 do_syscall_64+0x2ff/0x11e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The global static blocked domain is a dummy domain without corresponding dmar_domain structure, accessing beyond iommu_domain structure triggers oops easily. Fix it by return early in domain_remove_dev_pasid() like identity domain.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H

References

CVE-2026-52954

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: libceph: handle rbtree insertion error in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). In this function, num_choose_arg_maps is read from the message, and a corresponding number of crush_choose_arg_maps gets decoded afterwards. Each crush_choose_arg_map has a choose_args_index, which serves as the key when inserting it into the choose_args rbtree of the decoded crush_map. If a (potentially corrupted) message contains two crush_choose_arg_maps with the same index, the assertion in insert_choose_arg_map() triggers a kernel BUG when trying to insert the second crush_choose_arg_map. This patch fixes the issue by switching to the non-asserting rbtree insertion function and rejecting the message if the insertion fails. [ idryomov: changelog ]

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52955

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in crush_decode() A message of type CEPH_MSG_OSD_MAP containing a crush map with at least one bucket has two fields holding the bucket algorithm. If the values in these two fields differ, an out-of-bounds access can occur. This is the case because the first algorithm field (alg) is used to allocate the correct amount of memory for a bucket of this type, while the second algorithm field inside the bucket (b->alg) is used in the subsequent processing. This patch fixes the issue by adding a check that compares alg and b->alg and aborts the processing in case they differ. Furthermore, b->alg is set to 0 in this case, because the destruction of the crush map also uses this field to determine the bucket type, which can again result in an out-of-bounds access when trying to free the memory pointed to by the fields of the bucket. To correctly free the memory allocated for the bucket in such a case, the corresponding call to kfree is moved from the algorithm-specific crush_destroy_bucket functions to the generic crush_destroy_bucket().

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52956

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52957

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential null-ptr-deref in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an array of max_buckets CRUSH buckets is decoded, where some indices may not refer to actual buckets and are therefore set to NULL. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). When decoding a crush_choose_arg_map, a series of choose_args for different buckets is decoded, with the bucket_index being read from the incoming message. It is only checked that the bucket index does not exceed max_buckets, but not that it doesn't point to an index with a NULL bucket. If a (potentially corrupted) message contains a crush_choose_arg_map including such a bucket_index, a null pointer dereference may occur in the subsequent processing when attempting to access the bucket with the given index. This patch fixes the issue by extending the affected check. Now, it is only attempted to access the bucket if it is not NULL.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52958

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in osdmap_decode() When decoding osd_state and osd_weight from an incoming osdmap in osdmap_decode(), both are decoded for each osd, i.e., map->max_osd times. The ceph_decode_need() check only accounts for sizeof(map->osd_weight) once. This can potentially result in an out-of-bounds memory access if the incoming message is corrupted such that the max_osd value exceeds the actual content of the osdmap message. This patch fixes the issue by changing the corresponding part in the ceph_decode_need() check to account for map->max_osdsizeof(*map->osd_weight).

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-52959

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: virt: sev-guest: Do not use host-controlled page order in cleanup path When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST), get_ext_report() allocates a buffer to retrieve a certificate blob from the host, keeping track of its size in report_req->certs_len. However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating an invalid buffer size, as well as the expected length of such buffer. get_ext_report() subsequently updates report_req->certs_len with the host-controlled value, and cleans up the buffer by computing a page order from such value. This is incorrect, as the host-provided length may not match the page order of the original allocation, potentially resulting in corruption in the page allocator. Fix this by using alloc_pages_exact() instead, and reusing @npages to compute the size passed to free_pages_exact(). For consistency, also use @npages to compute the size when allocating the pages, even though this last change has no functional effect.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52960

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: ceph: put folios not suitable for writeback The batch holds references to the folios (see `filemap_get_folios`, `folio_batch_release`), so we need to `folio_put` the folios we remove. Tested on v6.18.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52961

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size The generic/642 test-case can reproduce the kernel crash: [40243.605254] ------------[ cut here ]------------ [40243.605956] kernel BUG at fs/ceph/xattr.c:918! [40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI [40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full) [40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [40243.611820] Workqueue: ceph-msgr ceph_con_workfn [40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0 [40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc [40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287 [40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000 [40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000 [40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000 [40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000 [40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd [40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000 [40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0 [40243.627408] Call Trace: [40243.627839] [40243.628188] __prep_cap+0x3fd/0x4a0 [40243.628789] ? do_raw_spin_unlock+0x4e/0xe0 [40243.629474] ceph_check_caps+0x46a/0xc80 [40243.630094] ? __lock_acquire+0x4a2/0x2650 [40243.630773] ? find_held_lock+0x31/0x90 [40243.631347] ? handle_cap_grant+0x79f/0x1060 [40243.632068] ? lock_release+0xd9/0x300 [40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340 [40243.633429] ? lock_release+0xd9/0x300 [40243.634052] handle_cap_grant+0xcf6/0x1060 [40243.634745] ceph_handle_caps+0x122b/0x2110 [40243.635415] mds_dispatch+0x5bd/0x2160 [40243.636034] ? ceph_con_process_message+0x65/0x190 [40243.636828] ? lock_release+0xd9/0x300 [40243.637431] ceph_con_process_message+0x7a/0x190 [40243.638184] ? kfree+0x311/0x4f0 [40243.638749] ? kfree+0x311/0x4f0 [40243.639268] process_message+0x16/0x1a0 [40243.639915] ? sg_free_table+0x39/0x90 [40243.640572] ceph_con_v2_try_read+0xf58/0x2120 [40243.641255] ? lock_acquire+0xc8/0x300 [40243.641863] ceph_con_workfn+0x151/0x820 [40243.642493] process_one_work+0x22f/0x630 [40243.643093] ? process_one_work+0x254/0x630 [40243.643770] worker_thread+0x1e2/0x400 [40243.644332] ? __pfx_worker_thread+0x10/0x10 [40243.645020] kthread+0x109/0x140 [40243.645560] ? __pfx_kthread+0x10/0x10 [40243.646125] ret_from_fork+0x3f8/0x480 [40243.646752] ? __pfx_kthread+0x10/0x10 [40243.647316] ? __pfx_kthread+0x10/0x10 [40243.647919] ret_from_fork_asm+0x1a/0x30 [40243.648556] [40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore [40243.654766] ---[ end trace 0000000000000000 ]--- Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") moved the required_blob_size computation to before the __build_xattrs() call, introducing a race. __build_xattrs() releases and reacquires i_ceph_lock during execution. In that window, handle_cap_grant() may update i_xattrs.blob with a newer MDS-provided blob and bump i_xattrs.version. When __bui ---truncated---

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52962

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ceph: fix a buffer leak in __ceph_setxattr() The old_blob in __ceph_setxattr() can store ci->i_xattrs.prealloc_blob value during the retry. However, it is never called the ceph_buffer_put() for the old_blob object. This patch fixes the issue of the buffer leak.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52963

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI endpoint descriptor scans snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint descriptor size before using baAssocJackID[], but the descriptor walker can still return a class-specific endpoint descriptor whose bLength exceeds the remaining bytes in the endpoint-extra scan. That leaves later flexible-array reads bounded by bLength, but not by the remaining bytes in the endpoint-extra scan. Stop walking when bLength is zero or extends past the remaining endpoint-extra scan.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52964

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans The USB MIDI 2.0 endpoint parser has the same descriptor walking pattern as the legacy MIDI parser. It validates bLength against bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the remaining bytes in the endpoint-extra scan. A malformed device can therefore make later baAssoGrpTrmBlkID[] reads consume bytes past the walked descriptor. Reject zero-length and overlong descriptors while walking endpoint extras.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52965

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure When ttm_tt_swapout() fails, the current code calls ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail() to restore the resource's bulk_move membership. However, ttm_resource_move_to_lru_tail() places the resource at the tail of the LRU list which, relative to the walk cursor's hitch node (placed immediately after the resource when it was yielded), puts the resource in front of the the hitch. The next list_for_each_entry_continue() from the hitch finds the same resource again, causing an infinite loop. Fix by deferring del_bulk_move to the success path only. On the success path, TTM_TT_FLAG_SWAPPED has just been set by ttm_tt_swapout() but the resource is still tracked in the bulk_move range, so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would incorrectly skip the removal. Introduce ttm_resource_del_bulk_move_unevictable() which bypasses that guard.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52966

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm: Replace old pointer to new idr Commit 5e28b7b94408 introduced a logical error by failing to replace the newly generated IDR pointer to old id's pointer at the correct location within the "change handle" logic; this resulted in the issue reported by syzbot [1]. Specifically, the new IDR object pointer is intended to replace the original id's pointer during the normal execution flow. Additionally, an unnecessary conditional check for the ret exit path has been removed. [1] !RB_EMPTY_ROOT(&prime_fpriv->dmabufs) WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833 Call Trace: drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269 drm_file_free drivers/gpu/drm/drm_file.c:237 [inline] drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290 drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52967

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix possible infinite loop and oob read in symlink_data() On 32-bit architectures, the infinite loop is as follows: len = p->ErrorDataLength == 0xfffffff8 u8 next = p->ErrorContextData + len next == p On 32-bit architectures, the out-of-bounds read is as follows: len = p->ErrorDataLength == 0xfffffff0 u8 next = p->ErrorContextData + len next == (u8 *)p - 8

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 8.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H

References

CVE-2026-52968

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: fix GAIT table indexing due to double-scaling pointer arithmetic kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and aen_host_forward() index the GAIT by manually multiplying the index with sizeof(struct zpci_gaite). Since aift->gait is already a struct zpci_gaite pointer, this double-scales the offset, accessing element aisb*16 instead of aisb. This causes out-of-bounds accesses when aisb >= 32 (with ZPCI_NR_DEVICES=512) Fix by removing the erroneous sizeof multiplication.

Published: 2026-06-24Modified: 2026-07-18

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-52969

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: KVM: Reject wrapped offset in kvm_reset_dirty_gfn() kvm_reset_dirty_gfn() guards the gfn range with if (!memslot || (offset + __fls(mask)) >= memslot->npages) return; but offset is u64 and the addition is unchecked. The check can be silently bypassed by a u64 wrap. The dirty ring backing those entries is MAP_SHARED at KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the slot and offset fields of any entry between when the kernel pushes them and when KVM_RESET_DIRTY_RINGS consumes them. On reset, kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds them straight back into this check; only the flags handshake is treated as the handover, the slot/offset payload is taken on trust. Crafting two entries entry[i].offset = 0xffffffffffffffc1 entry[i+1].offset = 0 makes the coalescing loop in kvm_dirty_ring_reset() compute delta = (s64)(0 - 0xffffffffffffffc1) = 63 which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn() call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63; the sum is 0 in u64 and the bounds check passes. That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked() unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() == true, i.e. shadow paging, any VM that has allocated shadow roots, or a write-tracked slot -- it reaches gfn_to_rmap(), which indexes slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an out-of-bounds load of a kvm_rmap_head, followed by a conditional clear of PT_WRITABLE_MASK in whatever the loaded pointer points at. The path is reachable from any process holding /dev/kvm. Range-check offset on its own first, so the addition cannot wrap. memslot->npages is bounded well below U64_MAX, so once offset < npages holds, offset + fls(mask) (with fls(mask) < BITS_PER_LONG) stays in range.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52970

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix missing expect put in obj eval nft_ct_expect_obj_eval() allocates an expectation and may call nf_ct_expect_related(), but never drops its local reference. Add nf_ct_expect_put(exp) before return to balance allocation.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52971

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Fix potential use-after-free in get_timestamp Move the phc->active check and resp pointer assignment to after acquiring the spinlock. Previously, phc->active was checked without holding the lock, and resp was cached from ena_dev->phc.virt_addr before the lock was acquired. If ena_com_phc_destroy() runs between the lockless active check and the lock acquisition, it sets active=false, releases the lock, frees the DMA memory, and sets virt_addr=NULL. The get_timestamp path would then read a NULL virt_addr and dereference it. With both the active check and the pointer read under the lock, destroy cannot free the memory while get_timestamp is using it.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52972

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000.

Published: 2026-06-24Modified: 2026-07-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52973

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM.

Published: 2026-06-24Modified: 2026-07-29

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52974

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: tls: fix strparser anchor skb leak on offload RX setup failure When tls_set_device_offload_rx() fails at tls_dev_add(), the error path calls tls_sw_free_resources_rx() to clean up the SW context that was initialized by tls_set_sw_offload(). This function calls tls_sw_release_resources_rx() (which stops the strparser via tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context), but never frees the anchor skb that was allocated by alloc_skb(0) in tls_strp_init(). Note that tls_sw_free_resources_rx() is exclusively used for this "failed to start offload" code path, there's no other caller. The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not use the standard strparser"), because the standard strparser doesn't try to pre-allocate an skb. The normal close path in tls_sk_proto_close() handles cleanup by calling tls_sw_strparser_done() (which calls tls_strp_done()) after dropping the socket lock, because tls_strp_done() does cancel_work_sync() and the strparser work handler takes the socket lock.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52975

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bonding: 3ad: implement proper RCU rules for port->aggregator syzbot found a data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler [1] which hints at lack of proper RCU implementation. Add __rcu qualifier to port->aggregator, and add proper RCU API. [1] BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0: ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline] bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569 process_one_work kernel/workqueue.c:3302 [inline] process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385 worker_thread+0x58a/0x780 kernel/workqueue.c:3466 kthread+0x22a/0x280 kernel/kthread.c:436 ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1: __bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline] bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881 bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853 rtnl_link_info_fill net/core/rtnetlink.c:906 [inline] rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927 rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168 rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453 rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline] rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495 __dev_notify_flags+0x76/0x390 net/core/dev.c:9790 netif_change_flags+0xac/0xd0 net/core/dev.c:9823 do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180 rtnl_group_changelink net/core/rtnetlink.c:3813 [inline] __rtnl_newlink net/core/rtnetlink.c:3981 [inline] rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109 rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995 netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x563/0x5b0 net/socket.c:2698 ___sys_sendmsg+0x195/0x1e0 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787 x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x0000000000000000 -> 0xffff88813cf5c400 Reported by Kernel Concurrency Sanitizer on: CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full) Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52976

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8)

Published: 2026-06-24Modified: 2026-08-10

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52977

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: futex: Prevent lockup in requeue-PI during signal/ timeout wakeup During wait-requeue-pi (task A) and requeue-PI (task B) the following race can happen: Task A Task B futex_wait_requeue_pi() futex_setup_timer() futex_do_wait() futex_requeue() CLASS(hb, hb1)(&key1); CLASS(hb, hb2)(&key2); timeout futex_requeue_pi_wakeup_sync() requeue_state = Q_REQUEUE_PI_IGNORE blocks on hb->lock futex_proxy_trylock_atomic() futex_requeue_pi_prepare() Q_REQUEUE_PI_IGNORE => -EAGAIN double_unlock_hb(hb1, hb2) retry Task B acquires both hb locks and attempts to acquire the PI-lock of the top most waiter (task B). Task A is leaving early due to a signal/ timeout and started removing itself from the queue. It updates its requeue_state but can not remove it from the list because this requires the hb lock which is owned by task B. Usually task A is able to swoop the lock after task B unlocked it. However if task B is of higher priority then task A may not be able to wake up in time and acquire the lock before task B gets it again. Especially on a UP system where A is never scheduled. As a result task A blocks on the lock and task B busy loops, trying to make progress but live locks the system instead. Tragic. This can be fixed by removing the top most waiter from the list in this case. This allows task B to grab the next top waiter (if any) in the next iteration and make progress. Remove the top most waiter if futex_requeue_pi_prepare() fails. Let the waiter conditionally remove itself from the list in handle_early_requeue_pi_wakeup().

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52978

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: psp: require admin permission for dev-set and key-rotate The dev-set and key-rotate netlink operations modify shared device state (PSP version configuration and cryptographic key material, respectively) but do not require CAP_NET_ADMIN. The only access control is psp_dev_check_access() which merely verifies netns membership.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52979

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: psp: check for device unregister when creating assoc psp_assoc_device_get_locked() obtains a psp_dev reference via psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU); it then acquires psd->lock and drops the reference. Before the lock is taken, psp_dev_unregister() can run to completion: take psd->lock, clear out state, unlock, drop the registration reference. The expectation is that the lock prevents device unregistration, but much like with netdevs special care has to be taken when "upgrading" a reference to a locked device. Add the missing check if device is still alive. psp_dev_is_registered() exists already but had no callers, which makes me wonder if I either forgot to add this or lost the check during refactoring...

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52980

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Clear rel_deadline when initializing forked entities A yield-triggered crash can happen when a newly forked sched_entity enters the fair class with se->rel_deadline unexpectedly set. The failing sequence is: 1. A task is forked while se->rel_deadline is still set. 2. __sched_fork() initializes vruntime, vlag and other sched_entity state, but does not clear rel_deadline. 3. On the first enqueue, enqueue_entity() calls place_entity(). 4. Because se->rel_deadline is set, place_entity() treats se->deadline as a relative deadline and converts it to an absolute deadline by adding the current vruntime. 5. However, the forked entity's deadline is not a valid inherited relative deadline for this new scheduling instance, so the conversion produces an abnormally large deadline. 6. If the task later calls sched_yield(), yield_task_fair() advances se->vruntime to se->deadline. 7. The inflated vruntime is then used by the following enqueue path, where the vruntime-derived key can overflow when multiplied by the entity weight. 8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility calculation, and can eventually make all entities appear ineligible. pick_next_entity() may then return NULL unexpectedly, leading to a later NULL dereference. A captured trace shows the effect clearly. Before yield, the entity's vruntime was around: 9834017729983308 After yield_task_fair() executed: se->vruntime = se->deadline the vruntime jumped to: 19668035460670230 and the deadline was later advanced further to: 19668035463470230 This shows that the deadline had already become abnormally large before yield_task_fair() copied it into vruntime. rel_deadline is only meaningful when se->deadline really carries a relative deadline that still needs to be placed against vruntime. A freshly forked sched_entity should not inherit or retain this state. Clear se->rel_deadline in __sched_fork(), together with the other sched_entity runtime state, so that the first enqueue does not interpret the new entity's deadline as a stale relative deadline.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52981

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: neigh: let neigh_xmit take skb ownership neigh_xmit always releases the skb, except when no neighbour table is found. But even the first added user of neigh_xmit (mpls) relied on neigh_xmit to release the skb (or queue it for tx). sashiko reported: If neigh_xmit() is called with an uninitialized neighbor table (for example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT and bypasses its internal out_kfree_skb error path. Because the return value of neigh_xmit() is ignored here, does this leak the SKB? Assume full ownership and remove the last code path that doesn't xmit or free skb.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52982

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit() syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit() when accessing skb->len for tx statistics after usb_submit_urb() has been called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226 The URB completion handler write_bulk_callback() frees the skb via dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU in softirq context before usb_submit_urb() returns in the submitter, so by the time the submitter reads skb->len the skb has already been queued to the per-CPU completion_queue and freed by net_tx_action(): CPU A (xmit) CPU B (USB completion softirq) ------------ ------------------------------ dev->tx_skb = skb; usb_submit_urb() --+ |-------> write_bulk_callback() | dev_kfree_skb_irq(dev->tx_skb) | net_tx_action() | napi_skb_cache_put() <-- free netdev->stats.tx_bytes | += skb->len; <-- UAF read Fix it by caching skb->len before submitting the URB and using the cached value when updating the tx_bytes counter. The pre-existing tx_bytes semantics are preserved: the counter tracks the original frame length (skb->len), not the ETH_ZLEN/USB-alignment padded "count" value that is handed to the device. Changing that would be a user-visible accounting change and is out of scope for this UAF fix.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52983

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52984

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: fix queue limit check to include reordered packets The queue limit check in netem_enqueue() uses q->t_len which only counts packets in the internal tfifo. Packets placed in sch->q by the reorder path (__qdisc_enqueue_head) are not counted, allowing the total queue occupancy to exceed sch->limit under reordering. Include sch->q.qlen in the limit check.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52985

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netdevsim: zero initialize struct iphdr in dummy sk_buff Syzbot reports a KMSAN uninit-value originating from nsim_dev_trap_skb_build, with the allocation also being performed in the same function. Fix this by calling skb_put_zero instead of skb_put to guarantee zero initialization of the whole IP header.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52986

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu .

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52987

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid double drm_exec_fini() in userq validate When new_addition is true, amdgpu_userq_vm_validate() calls drm_exec_fini(&exec) before iterating over the collected HMM ranges and calling amdgpu_ttm_tt_get_user_pages(). If amdgpu_ttm_tt_get_user_pages() fails in that path, the code jumps to unlock_all and calls drm_exec_fini(&exec) a second time on the same exec object. drm_exec_fini() is not idempotent: it frees exec->objects and may also drop exec->contended and finalize the ww acquire context. Route that error path directly to the range cleanup once exec has already been finalized. Issue found using a prototype static analysis tool and confirmed by code review. (cherry picked from commit 2802952e4a07306da6ebe813ff1acacc5691851a)

Published: 2026-06-24Modified: 2026-08-03

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52988

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase Publish new hooks in the list into the basechain/flowtable using splice_list_rcu() to ensure netlink dump list traversal via rcu is safe while concurrent ruleset update is going on.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-52989

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers Currently, when nvmet_tcp_build_pdu_iovec() detects an out-of-bounds PDU length or offset, it triggers nvmet_tcp_fatal_error(cmd->queue) and returns early. However, because the function returns void, the callers are entirely unaware that a fatal error has occurred and that the cmd->recv_msg.msg_iter was left uninitialized. Callers such as nvmet_tcp_handle_h2c_data_pdu() proceed to blindly overwrite the queue state with queue->rcv_state = NVMET_TCP_RECV_DATA Consequently, the socket receiving loop may attempt to read incoming network data into the uninitialized iterator. Fix this by shifting the error handling responsibility to the callers.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52990

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fsnotify: fix inode reference leak in fsnotify_recalc_mask() fsnotify_recalc_mask() fails to handle the return value of __fsnotify_recalc_mask(), which may return an inode pointer that needs to be released via fsnotify_drop_object() when the connector's HAS_IREF flag transitions from set to cleared. This manifests as a hung task with the following call trace: INFO: task umount:1234 blocked for more than 120 seconds. Call Trace: __schedule schedule fsnotify_sb_delete generic_shutdown_super kill_anon_super cleanup_mnt task_work_run do_exit do_group_exit The race window that triggers the iref leak: Thread A (adding mark) Thread B (removing mark) ────────────────────── ──────────────────────── fsnotify_add_mark_locked(): fsnotify_add_mark_list(): spin_lock(conn->lock) add mark_B(evictable) to list spin_unlock(conn->lock) return /* ---- gap: no lock held ---- / fsnotify_detach_mark(mark_A): spin_lock(mark_A->lock) clear ATTACHED flag on mark_A spin_unlock(mark_A->lock) fsnotify_put_mark(mark_A) fsnotify_recalc_mask(): spin_lock(conn->lock) __fsnotify_recalc_mask(): / mark_A skipped: ATTACHED cleared / / only mark_B(evictable) remains / want_iref = false has_iref = true / not yet cleared / -> HAS_IREF transitions true -> false -> returns inode pointer spin_unlock(conn->lock) / BUG: return value discarded! * iput() and fsnotify_put_sb_watched_objects() * are never called */ Fix this by deferring the transition true -> false of HAS_IREF flag from fsnotify_recalc_mask() (Thread A) to fsnotify_put_mark() (thread B).

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52991

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: sched/psi: fix race between file release and pressure write A potential race condition exists between pressure write and cgroup file release regarding the priv member of struct kernfs_open_file, which triggers the uaf reported in [1]. Consider the following scenario involving execution on two separate CPUs: CPU0 CPU1 ==== ==== vfs_rmdir() kernfs_iop_rmdir() cgroup_rmdir() cgroup_kn_lock_live() cgroup_destroy_locked() cgroup_addrm_files() cgroup_rm_file() kernfs_remove_by_name() kernfs_remove_by_name_ns() vfs_write() __kernfs_remove() new_sync_write() kernfs_drain() kernfs_fop_write_iter() kernfs_drain_open_files() cgroup_file_write() kernfs_release_file() pressure_write() cgroup_file_release() ctx = of->priv; kfree(ctx); of->priv = NULL; cgroup_kn_unlock() cgroup_kn_lock_live() cgroup_get(cgrp) cgroup_kn_unlock() if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards the memory deallocation of of->priv performed within cgroup_file_release(). However, the operations involving of->priv executed within pressure_write() are not entirely covered by the protection of cgroup_mutex. Consequently, if the code in pressure_write(), specifically the section handling the ctx variable executes after cgroup_file_release() has completed, a uaf vulnerability involving of->priv is triggered. Therefore, the issue can be resolved by extending the scope of the cgroup_mutex lock within pressure_write() to encompass all code paths involving of->priv, thereby properly synchronizing the race condition occurring between cgroup_file_release() and pressure_write(). And, if an live kn lock can be successfully acquired while executing the pressure write operation, it indicates that the cgroup deletion process has not yet reached its final stage; consequently, the priv pointer within open_file cannot be NULL. Therefore, the operation to retrieve the ctx value must be moved to a point after the live kn lock has been successfully acquired. In another situation, specifically after entering cgroup_kn_lock_live() but before acquiring cgroup_mutex, there exists a different class of race condition: CPU0: write memory.pressure CPU1: write cgroup.pressure=0 =========================== ============================= kernfs_fop_write_iter() kernfs_get_active_of(of) pressure_write() cgroup_kn_lock_live(memory.pressure) cgroup_tryget(cgrp) kernfs_break_active_protection(kn) ... blocks on cgroup_mutex cgroup_pressure_write() cgroup_kn_lock_live(cgroup.pressure) cgroup_file_show(memory.pressure, false) kernfs_show(false) kernfs_drain_open_files() cgroup_file_release(of) kfree(ctx) of->priv = NULL cgroup_kn_unlock() ... acquires cgroup_mutex ctx = of->priv; // may now be NULL if (ctx->psi.trigger) // NULL dereference Consequently, there is a possibility that of->priv is NULL, the pressure write needs to check for this. Now that the scope of the cgroup_mutex has been expanded, the original explicit cgroup_get/put operations are no longer necessary, this is because acquiring/releasing the live kn lock inherently executes a cgroup get/put operation. [1] BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 Call Trace: pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43 ---truncated---

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52992

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: fs/adfs: validate nzones in adfs_validate_bblk() Reject ADFS disc records with a zero zone count during boot block validation, before the disc record is used. When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...) which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to dm[-1], causing an out-of-bounds write before the allocated buffer. adfs_validate_dr0() already rejects nzones != 1 for old-format images. Add the equivalent check to adfs_validate_bblk() for new-format images so that a crafted image with nzones == 0 is rejected at probe time. Found by syzkaller.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52993

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations.

Published: 2026-06-24Modified: 2026-08-03

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-52994

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting virtio_transport_init_zcopy_skb() uses iter->count as the size argument for msg_zerocopy_realloc(), which in turn passes it to mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this function is called after virtio_transport_fill_skb() has already consumed the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count will be 0, skipping the RLIMIT_MEMLOCK enforcement. Pass pkt_len (the total bytes being sent) as an explicit parameter to virtio_transport_init_zcopy_skb() instead of reading the already-consumed iter->count. This matches TCP and UDP, which both call msg_zerocopy_realloc() with the original message size.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52995

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/rds: zero per-item info buffer before handing it to visitors rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a caller-allocated on-stack u64 buffer to a per-connection visitor and then copy the full item_len bytes back to user space via rds_info_copy() regardless of how much of the buffer the visitor actually wrote. rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only write a subset of their output struct when the underlying rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl and the two GIDs via explicit memsets). Several u32 fields (max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size, cache_allocs) and the 2-byte alignment hole between sl and cache_allocs remain as whatever stack contents preceded the visitor call and are then memcpy_to_user()'d out to user space. struct rds_info_rdma_connection and struct rds6_info_rdma_connection are the only rds_info_* structs in include/uapi/linux/rds.h that are not marked attribute((packed)), so they have a real alignment hole. The other info visitors (rds_conn_info_visitor, rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields of their packed output struct today and are not known to be vulnerable, but a future visitor that adds a conditional write-path would have the same bug. Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y: a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB, binds to a local address on an RDMA-capable netdev (rxe soft-RoCE on any netdev is sufficient), sendto()'s any peer on the same subnet (fails cleanly but installs an rds_connection in the global hash in RDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS, RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26 bytes of stack garbage including kernel text/data pointers: 0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2 8..39 00 ... gids (memset-zeroed) 40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr) 48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max) 56..59 01 00 08 00 rdma_mr_size (garbage) 60..61 00 00 tos, sl 62..63 00 00 alignment padding 64..67 18 00 00 00 cache_allocs (garbage) Fix by zeroing the per-item buffer in both rds_for_each_conn_info() and rds_walk_conn_path_info() before invoking the visitor. This covers the IPv4/IPv6 IB visitors and hardens all current and future visitors against the same class of bug. No functional change for visitors that fully populate their output. Changes in v2: - retarget at the net tree (subject prefix "[PATCH net v2]", net/rds: prefix in the title) - pick up Reviewed-by tags from Sharath Srinivasan and Allison Henderson

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52996

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount incremented via ksmbd_fp_get(). parse_durable_handle_context() in the DURABLE_REQ_V2 case properly releases this reference on every path inside the ClientGUID-match branch, either by calling ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp for a successful reconnect. However, when an entry exists in the global file table with the same CreateGuid but a different ClientGUID, the code simply falls through to the new-open path without dropping the reference obtained from ksmbd_lookup_fd_cguid(). Per MS-SMB2 section 3.3.5.9.10 ("Handling the SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server MUST locate an Open whose Open.CreateGuid matches the request's CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the connection that received the request. If no such Open is found, the server MUST continue with the normal open execution phase. A CreateGuid hit with a ClientGUID mismatch is therefore the "Open not found" case: proceeding with a new open is correct, but the reference obtained purely as a side effect of the lookup must not be leaked. Repeated requests that hit this mismatch pin global_ft entries, prevent __ksmbd_close_fd() from ever running for the corresponding files, and defeat the durable scavenger, leading to long-lived resource leaks. Release the reference in the mismatch path and clear dh_info->fp so subsequent logic does not mistake a non-matching lookup result for a reconnect target.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52997

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_dualpi2: drain both C-queue and L-queue in dualpi2_change() Fix dualpi2_change() to correctly enforce updated limit and memlimit values after a configuration change of the dualpi2 qdisc. Before this patch, dualpi2_change() always attempted to dequeue packets via the root qdisc (C-queue) when reducing backlog or memory usage, and unconditionally assumed that a valid skb will be returned. When traffic classification results in packets being queued in the L-queue while the C-queue is empty, this leads to a NULL skb dereference during limit or memlimit enforcement. This is fixed by first dequeuing from the C-queue path if it is non-empty. Once the C-queue is empty, packets are dequeued directly from the L-queue. Return values from qdisc_dequeue_internal() are checked for both queues. When dequeuing from the L-queue, the parent qdisc qlen and backlog counters are updated explicitly to keep overall qdisc statistics consistent.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52998

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-52999

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix out-of-bounds read on option matching In nf_osf_match(), the nf_osf_hdr_ctx structure is initialized once and passed by reference to nf_osf_match_one() for each fingerprint checked. During TCP option parsing, nf_osf_match_one() advances the shared ctx->optp pointer. If a fingerprint perfectly matches, the function returns early without restoring ctx->optp to its initial state. If the user has configured NF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint. However, because ctx->optp was not restored, the next call to nf_osf_match_one() starts parsing from the end of the options buffer. This causes subsequent matches to read garbage data and fail immediately, making it impossible to log more than one match or logging incorrect matches. Instead of using a shared ctx->optp pointer, pass the context as a constant pointer and use a local pointer (optp) for TCP option traversal. This makes nf_osf_match_one() strictly stateless from the caller's perspective, ensuring every fingerprint check starts at the correct option offset.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xCRITICAL 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53000

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nat: use kfree_rcu to release ops Florian Westphal says: "Historically this is not an issue, even for normal base hooks: the data path doesn't use the original nf_hook_ops that are used to register the callbacks. However, in v5.14 I added the ability to dump the active netfilter hooks from userspace. This code will peek back into the nf_hook_ops that are available at the tail of the pointer-array blob used by the datapath. The nat hooks are special, because they are called indirectly from the central nat dispatcher hook. They are currently invisible to the nfnl hook dump subsystem though. But once that changes the nat ops structures have to be deferred too." Update nf_nat_register_fn() to deal with partial exposition of the hooks from error path which can be also an issue for nfnetlink_hook.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53001

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: restrict several matches to inet family This is a partial revert of: commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions") to allow ipv4 and ipv6 only. - xt_mac - xt_owner - xt_physdev These extensions are not used by ebtables in userspace. Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4 specific.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53002

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: remove sprintf usage Replace it with scnprintf, the buffer sizes are expected to be large enough to hold the result, no need for snprintf+overflow check. Increase buffer size in mangle_content_len() while at it. BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270 Write of size 1 at addr [..] vsnprintf+0xea5/0x1270 sprintf+0xb1/0xe0 mangle_content_len+0x1ac/0x280 nf_nat_sdp_session+0x1cc/0x240 process_sdp+0x8f8/0xb80 process_invite_request+0x108/0x2b0 process_sip_msg+0x5da/0xf50 sip_help_tcp+0x45e/0x780 nf_confirm+0x34d/0x990 [..]

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53003

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53004

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks sctp_getsockopt_peer_auth_chunks() checks that the caller's optval buffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL; but then writes num_chunks bytes to p->gauth_chunks, which lives at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8 inside optval. The check is missing the sizeof(struct sctp_authchunks) = 8-byte header. When the caller supplies len == num_chunks (for any num_chunks > 0) the test passes but copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes past the declared buffer. The sibling function sctp_getsockopt_local_auth_chunks() at the next line already has the correct check: if (len < sizeof(struct sctp_authchunks) + num_chunks) return -EINVAL; Align the peer variant with its sibling. Reproducer confirms on v7.0-13-generic: an unprivileged userspace caller that opens a loopback SCTP association with AUTH enabled, queries num_chunks with a short optval, then issues the real getsockopt with len == num_chunks and sentinel bytes painted past the buffer observes those sentinel bytes overwritten with the peer's AUTH chunk type. The bytes written are under the peer's control but land in the caller's own userspace; this is not a kernel memory corruption, but it is a kernel-side contract violation that can silently corrupt adjacent userspace data.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53005

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop all SCM attributes for SOCKMAP. SOCKMAP can hide inflight fd from AF_UNIX GC. When a socket in SOCKMAP receives skb with inflight fd, sk_psock_verdict_data_ready() looks up the mapped socket and enqueue skb to its psock->ingress_skb. Since neither the old nor the new GC can inspect the psock queue, the hidden skb leaks the inflight sockets. Note that this cannot be detected via kmemleak because inflight sockets are linked to a global list. In addition, SOCKMAP redirect breaks the Tarjan-based GC's assumption that unix_edge.successor is always alive, which is no longer true once skb is redirected, resulting in use-after-free below. [0] Moreover, SOCKMAP does not call scm_stat_del() properly, so unix_show_fdinfo() could report an incorrect fd count. sk_msg_recvmsg() does not support any SCM attributes in the first place. Let's drop all SCM attributes before passing skb to the SOCKMAP layer. [0]: BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) Read of size 8 at addr ffff888125362670 by task kworker/56:1/496 CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events sk_psock_backlog Call Trace: dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379) kasan_report (mm/kasan/report.c:597) unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) unix_destroy_fpl (net/unix/garbage.c:317) unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976) sk_psock_backlog (./include/linux/skbuff.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) Allocated by task 955: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) __kasan_slab_alloc (mm/kasan/common.c:369) kmem_cache_alloc_noprof (mm/slub.c:4539) sk_prot_alloc (net/core/sock.c:2240) sk_alloc (net/core/sock.c:2301) unix_create1 (net/unix/af_unix.c:1099) unix_create (net/unix/af_unix.c:1169) __sock_create (net/socket.c:1606) __sys_socketpair (net/socket.c:1811) __x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860) do_syscall_64 (arch/x86/entry/syscall_64.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 496: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kmem_cache_free (mm/slub.c:6165) __sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384) sk_psock_destroy (./include/net/sock.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258)

Published: 2026-06-24Modified: 2026-07-24

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53006

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call.

Published: 2026-06-24Modified: 2026-07-28

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53007

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ice: fix potential NULL pointer deref in error path of ice_set_ringparam() ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without clearing ICE_TX_RING_FLAGS_TXTIME bit. When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent ice_setup_tx_ring() call fails, a NULL pointer dereference could happen in the unwinding sequence: ice_clean_tx_ring() -> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set) -> ice_free_tx_tstamp_ring() -> ice_free_tstamp_ring() -> tstamp_ring->desc (NULL deref) Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue. Note that this potential issue is found by manual code review. Compile test only since unfortunately I don't have E830 devices.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53008

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: ice: fix race condition in TX timestamp ring cleanup Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map() that can cause a NULL pointer dereference. ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map call on another CPU to dereference the tstamp_ring, which could lead to a NULL pointer dereference. CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map() --------------------------------|--------------------------------- tx_ring->tstamp_ring = NULL | | ice_is_txtime_cfg() -> true | tstamp_ring = tx_ring->tstamp_ring | tstamp_ring->count // NULL deref! flags &= ~ICE_TX_FLAGS_TXTIME | Fix by: 1. Reordering ice_free_tx_tstamp_ring() to clear the flag before NULLing the pointer, with smp_wmb() to ensure proper ordering. 2. Adding smp_rmb() in ice_tx_map() after the flag check to order the flag read before the pointer read, using READ_ONCE() for the pointer, and adding a NULL check as a safety net. 3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag operations throughout the driver: - ICE_TX_RING_FLAGS_XDP - ICE_TX_RING_FLAGS_VLAN_L2TAG1 - ICE_TX_RING_FLAGS_VLAN_L2TAG2 - ICE_TX_RING_FLAGS_TXTIME

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53009

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ice: fix double-free of tx_buf skb If ice_tso() or ice_tx_csum() fail, the error path in ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points to it and is marked as valid (ICE_TX_BUF_SKB). 'next_to_use' remains unchanged, so the potential problem will likely fix itself when the next packet is transmitted and the tx_buf gets overwritten. But if there is no next packet and the interface is brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf() will find the tx_buf and free the skb for the second time. The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error path, so that ice_unmap_and_free_tx_buf(). Move the initialization of 'first' up, to ensure it's already valid in case we hit the linearization error path. The bug was spotted by AI while I had it looking for something else. It also proposed an initial version of the patch. I reproduced the bug and tested the fix by adding code to inject failures, on a build with KASAN. I looked for similar bugs in related Intel drivers and did not find any.

Published: 2026-06-24Modified: 2026-08-12

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53010

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb2_open during durable reconnect In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference to the durable file descriptor early during the durable reconnect process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails) or a scavenger accesses the file, it leads to a use-after-free when accessing fp properties (eg fp->create_time). Move the single put to the end of the function below err_out2 so fp stays valid until smb2_open returns.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53011

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calculated end_time. setup_first_end_time() sets the first entry's end_time to base_time + interval when the schedule is installed, so the value is already correct. The deleted 'end_time = sched_base_time(admin)' assignment was also harmful independently: it would overwrite the new first entry's pre-calculated end_time with just base_time.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53012

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nexthop: fix IPv6 route referencing IPv4 nexthop syzbot reported a panic [1] [2]. When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag of all groups containing this nexthop is not updated. This is because nh_group_v4_update is only called when replacing AF_INET to AF_INET6, but the reverse direction (AF_INET6 to AF_INET) is missed. This allows a stale has_v4=false to bypass fib6_check_nexthop, causing IPv6 routes to be attached to groups that effectively contain only AF_INET members. Subsequent route lookups then call nexthop_fib6_nh() which returns NULL for the AF_INET member, leading to a NULL pointer dereference. Fix by calling nh_group_v4_update whenever the family changes, not just AF_INET to AF_INET6. Reproducer: # AF_INET6 blackhole ip -6 nexthop add id 1 blackhole # group with has_v4=false ip nexthop add id 100 group 1 # replace with AF_INET (no -6), has_v4 stays false ip nexthop replace id 1 blackhole # pass stale has_v4 check ip -6 route add 2001:db8::/64 nhid 100 # panic ping -6 2001:db8::1 [1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0 [2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53013

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1. This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb runs out of space, triggering a WARN_ON in rtnetlink and preventing the interface from being dumped. The bug can be reproduced with: ip link add macvlan0 link eth0 type macvlan mode bridge ip link set macvlan0 type macvlan bc_cutoff 0 ip -d link show macvlan0 # fails with -EMSGSIZE The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff"), which added the nla_put_s32() call in macvlan_fill_info() but missed adding the corresponding nla_total_size(4) in macvlan_get_size(). A follow-up commit 55cef78c244d ("macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still did not fix the size calculation.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53014

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir In tcf_blockcast_redir(), when iterating block ports to redirect packets to multiple devices, the mac_header_xmit flag is queried from the wrong device. The loop sends to dev_prev but queries dev_is_mac_header_xmit(dev) — which is the NEXT device in the iteration, not the one being sent to. This causes tcf_mirred_to_dev() to make incorrect decisions about whether to push or pull the MAC header. When the block contains mixed device types (e.g., an ethernet veth and a tunnel device), intermediate devices get the wrong mac_header_xmit flag, leading to skb header corruption. In the worst case, skb_push_rcsum with an incorrect mac_len can exhaust headroom and panic. The last device in the loop is handled correctly (line 365-366 uses dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste oversight for the intermediate devices. Fix by using dev_prev instead of dev for the mac_header_xmit query, consistent with the device actually being sent to.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53015

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: erofs: unify lcn as u64 for 32-bit platforms As sashiko reported [1], `lcn` was typed as `unsigned long` (or `unsigned int` sometimes), which is only 32 bits wide on 32-bit platforms, which causes `(lcn << lclusterbits)` to be truncated at 4 GiB. In order to consolidate the logic, just use `u64` consistently around the codebase. [1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53016

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53017

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix data loss caused by incorrect use of nat_entry flag Data loss can occur when fsync is performed on a newly created file (before any checkpoint has been written) concurrently with a checkpoint operation. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes - f2fs_sync_node_pages - f2fs_flush_nat_entries - f2fs_fsync_node_pages // no dirty node - f2fs_need_inode_block_update // return false SPO and lost 'file A' f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC flags for the nat_entry, but this does not mean that the checkpoint has actually completed successfully. However, f2fs_need_inode_block_update() checks these flags and incorrectly assumes that the checkpoint has finished. The root cause is that the semantics of IS_CHECKPOINTED and HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully completes. This patch modifies f2fs_need_inode_block_update() to acquire the sbi->node_write lock before reading the nat_entry flags, ensuring that once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the checkpoint operation has already completed.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53018

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid reading already updated pages during GC We found the following issue during fuzz testing: page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9 memcg:f8ffff800e269c00 aops:f2fs_meta_aops ino:2 flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a) raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618 raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00 page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio)) page_owner tracks the page as allocated post_alloc_hook+0x58c/0x5ec prep_new_page+0x34/0x284 get_page_from_freelist+0x2dcc/0x2e8c __alloc_pages_noprof+0x280/0x76c __folio_alloc_noprof+0x18/0xac __filemap_get_folio+0x6bc/0xdc4 pagecache_get_page+0x3c/0x104 do_garbage_collect+0x5c78/0x77a4 f2fs_gc+0xd74/0x25f0 gc_thread_func+0xb28/0x2930 kthread+0x464/0x5d8 ret_from_fork+0x10/0x20 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1563! folio_end_read+0x140/0x168 f2fs_finish_read_bio+0x5c4/0xb80 f2fs_read_end_io+0x64c/0x708 bio_endio+0x85c/0x8c0 blk_update_request+0x690/0x127c scsi_end_request+0x9c/0xb8c scsi_io_completion+0xf0/0x250 scsi_finish_command+0x430/0x45c scsi_complete+0x178/0x6d4 blk_mq_complete_request+0xcc/0x104 scsi_done_internal+0x214/0x454 scsi_done+0x24/0x34 which is similar to the problem reported by syzbot: https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc This case is consistent with the description in commit 9bf1a3f ("f2fs: avoid GC causing encrypted file corrupted"): Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after being written it is marked as uptodate. Then, Page 1 is moved from blkaddr B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by ra_data_block. There is no need to read Page 1 again from blkaddr B, since it has already been updated. Therefore, avoid initiating I/O in this case.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53019

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc() Fix inverted condition that skips frequency change trigger, causing kernel panics during cpufreq scaling.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53020

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: um: Fix potential race condition in TLB sync During the TLB sync, we need to traverse and modify the page table, so we should hold the page table lock. Since full SMP support for threads within the same process is still missing, let's disable the split page table lock for simplicity.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53021

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix integer overflow in UNMAP bounds check sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53022

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include]

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53023

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: terminate the cached volume label after UTF-8 conversion ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s() and stores the result in sbi->volume.label. The converted label is later exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only returns the number of bytes written and does not add a trailing NUL. If the converted label fills the entire fixed buffer, ntfs3_label_show() can read past the end of sbi->volume.label while looking for a terminator. Terminate the cached label explicitly after a successful conversion and clamp the exact-full case to the last byte of the buffer.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53024

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free if write is called after disconnect If a user writes to the chardev after disconnect has been called, the kernel panics with the following trace (with CONFIG_INIT_ON_FREE_DEFAULT_ON=y): BUG: kernel NULL pointer dereference, address: 0000000000000218 ... Call Trace: gb_operation_create_common+0x61/0x180 gb_operation_create_flags+0x28/0xa0 gb_operation_sync_timeout+0x6f/0x100 raw_write+0x7b/0xc7 [gb_raw] vfs_write+0xcf/0x420 ? task_mm_cid_work+0x136/0x220 ksys_write+0x63/0xe0 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f Disconnect calls gb_connection_destroy, which ends up freeing the connection object. When gb_operation_sync is called in the write file operations, its gets a freed connection as parameter and the kernel panics. The gb_connection_destroy cannot be moved out of the disconnect function, as the Greybus subsystem expect all connections belonging to a bundle to be destroyed when disconnect returns. To prevent this bug, use a rw lock to synchronize access between write and disconnect. This guarantees that the write function doesn't try to use a disconnected connection.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53025

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: cdev_put+0x18/0x30 fput+0x255/0x2a0 x64_sys_close+0x3d/0x80 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f The cdev is contained in the "gb_raw" structure, which is freed in the disconnect operation. When the cdev is released at a later time, cdev_put gets an address that points to freed memory. To fix this use-after-free, convert the struct device from a pointer to being embedded, that makes the lifetime of the cdev and of this device the same. Then, use cdev_device_add, which guarantees that the device won't be released until all references to the cdev have been released. Finally, delegate the freeing of the structure to the device release function, instead of freeing immediately in the disconnect callback.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53026

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already set by another thread, __nfs4_file_get_access should not be called to increment the nfs4_file access count since that was already done by the thread that added READ access to the file. The extra fi_access count in nfs4_file can prevent the corresponding nfsd_file from being freed. When stopping nfs-server service, these extra access counts trigger a BUG in kmem_cache_destroy() that shows nfsd_file object remaining on __kmem_cache_shutdown. This problem can be reproduced by running the Git project's test suite over NFS.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53027

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked() When a compressed or sparse attribute has its clusters frame-aligned, vcn is rounded down to the frame start using cmask, which can result in vcn != vcn0. In this case, vcn and vcn0 may reside in different attribute segments. The code already handles the case where vcn is in a different segment by loading its runs before allocation. However, it fails to load runs for vcn0 when vcn0 resides in a different segment than vcn. This causes run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was never loaded into the in-memory run list, triggering the WARN_ON(1). Fix this by adding a missing check for vcn0 after the existing vcn segment check. If vcn0 falls outside the current segment range [svcn, evcn1), find and load the attribute segment containing vcn0 before performing the run lookup. The following scenario triggers the bug: attr_data_get_block_locked() vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment load runs for vcn segment <- vcn0 segment not loaded! attr_allocate_clusters() <- allocation succeeds run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN WARN_ON(1) <- bug fires here!

Published: 2026-06-24Modified: 2026-07-24

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53028

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: Fix error pointer dereference The variable tps->partner is checked for an error pointer and then if it is, it sends an error message but does not return and then immediately dereferenced a few lines below: tps->partner = typec_register_partner(tps->port, &desc); if (IS_ERR(tps->partner)) dev_warn(tps->dev, "%s: failed to register partnet\n", func); if (desc.identity) { typec_partner_set_identity(tps->partner); cd321x->cur_partner_identity = st.partner_identity; } Add early return and fix spelling mistake in error message. Detected by Smatch: drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error: 'tps->partner' dereferencing possible ERR_PTR()

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53029

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent uninitialized lcn caused by zero len syzbot reported a uninit-value in ntfs_iomap_begin [1]. Since runs was not touched yet, run_lookup_entry() immediately fails and returns false, which makes the value of "len" 0. Simultaneously, the new value and err value are also 0, causing the logic in attr_data_get_block_locked() to jump directly to ok, ultimately resulting in lcn being triggered before it is set [1]. In ntfs_iomap_begin(), the check for a 0 value in clen is moved forward to before updating lcn to avoid this [1]. [1] BUG: KMSAN: uninit-value in ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825 ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825 iomap_iter+0x9b7/0x1540 fs/iomap/iter.c:110 Local variable lcn created at: ntfs_iomap_begin+0x15d/0x1460 fs/ntfs3/inode.c:786

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53030

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers() The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup attribute to automatically free the memory when the variable goes out of scope.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53031

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate node_id in arena_alloc_pages() arena_alloc_pages() accepts a plain int node_id and forwards it through the entire allocation chain without any bounds checking. Validate node_id before passing it down the allocation chain in arena_alloc_pages().

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53032

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL deref in map_kptr_match_type for scalar regs Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local kptr") refactored map_kptr_match_type() to branch on btf_is_kernel() before checking base_type(). A scalar register stored into a kptr slot has no btf, so the btf_is_kernel(reg->btf) call dereferences NULL. Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf access.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53033

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53034

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) ... sk_pair = unix_peer(sk) sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newsk BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0 Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Initial idea was to move peer assignment _before_ the sk_state update[1], but that involved an additional memory barrier, and changing the hot path was rejected. Then a NULL check during proto update in unix_stream_bpf_update_proto() was considered[2], but the follow-up discussion[3] focused on the root cause, i.e. sockmap update taking a wrong lock. Or, more specifically, missing unix_state_lock()[4]. In the end it was concluded that teaching sockmap about the af_unix locking would be unnecessarily complex[5]. Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT are allowed to update sockmaps, sock_map_update_elem() taking the unix lock, as it is currently implemented in unix_state_lock(): spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken in a process context, followed by a softirq-context TC BPF program attempting to take the same spinlock -- deadlock[6]. This way we circled back to the peer check idea[2]. [1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/ [2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/ [3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/ [4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/ [5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/ [6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/ Summary of scenarios where af_unix/stream connect() may race a sockmap update: 1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys() Implemented NULL check is sufficient. Once assigned, socket peer won't be released until socket fd is released. And that's not an issue because sock_map_update_elem_sys() bumps fd refcnf. 2. connect() vs BPF program doing update Update restricted per verifier.c:may_update_sockmap() to BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only) BPF_PROG_TYPE_SOCKET_FILTER BPF_PROG_TYPE_SCHED_CLS BPF_PROG_TYPE_SCHED_ACT BPF_PROG_TYPE_XDP BPF_PROG_TYPE_SK_REUSEPORT BPF_PROG_TYPE_FLOW_DISSECTOR BPF_PROG_TYPE_SK_LOOKUP Plus one more race to consider: CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) sock_hold(newsk) smp_mb__after_atomic() ---truncated---

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53035

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix iter deadlock bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); * DEADLOCK * May be due to missing lock nesting notation 4 locks held by test_progs/1393: #0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0 #1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0 #2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 #3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00 Call Trace: dump_stack_lvl+0x5d/0x80 print_deadlock_bug.cold+0xc0/0xce __lock_acquire+0x130f/0x2590 lock_acquire+0x14e/0x2b0 _raw_spin_lock+0x30/0x40 sock_map_update_elem+0xdb/0x1f0 bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4 bpf_iter_run_prog+0x5b9/0xb00 bpf_iter_unix_seq_show+0x1f7/0x2e0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53036

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for check_imm19(), values in [2^18, 2^19) slip past the check but do not fit into the 19-bit signed imm19 field of B.cond. aarch64_insn_encode_immediate() then masks the raw value into the 19-bit field, setting bit 18 (the sign bit) and flipping a forward branch into a backward one. Same class of issue exists for check_imm26() and the B/BL encoding. Shift by (bits - 1) instead of bits so the actual signed N-bit range is enforced.

Published: 2026-06-24Modified: 2026-07-15

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53037

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53038

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ima_fs: Correctly create securityfs files for unsupported hash algos ima_tpm_chip->allocated_banks[i].crypto_id is initialized to HASH_ALGO__LAST if the TPM algorithm is not supported. However there are places relying on the algorithm to be valid because it is accessed by hash_algo_name[]. On 6.12.40 I observe the following read out-of-bounds in hash_algo_name: ================================================================== BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440 Read of size 8 at addr ffffffff83e18138 by task swapper/0/1 CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3 Call Trace: dump_stack_lvl+0x61/0x90 print_report+0xc4/0x580 ? kasan_addr_to_slab+0x26/0x80 ? create_securityfs_measurement_lists+0x396/0x440 kasan_report+0xc2/0x100 ? create_securityfs_measurement_lists+0x396/0x440 create_securityfs_measurement_lists+0x396/0x440 ima_fs_init+0xa3/0x300 ima_init+0x7d/0xd0 init_ima+0x28/0x100 do_one_initcall+0xa6/0x3e0 kernel_init_freeable+0x455/0x740 kernel_init+0x24/0x1d0 ret_from_fork+0x38/0x80 ret_from_fork_asm+0x11/0x20 The buggy address belongs to the variable: hash_algo_name+0xb8/0x420 Memory state around the buggy address: ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9 ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9 ^ ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9 ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9 ================================================================== Seems like the TPM chip supports sha3_256, which isn't yet in tpm_algorithms: tpm tpm0: TPM with unsupported bank algorithm 0x0027 That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0 Library Part 2: Structures", page 51 [1]. See also the related U-Boot algorithms update [2]. Thus solve the problem by creating a file name with "_tpm_alg_" postfix if the crypto algorithm isn't initialized. This is how it looks on the test machine (patch ported to v6.12 release): # ls -1 /sys/kernel/security/ima/ ascii_runtime_measurements ascii_runtime_measurements_tpm_alg_27 ascii_runtime_measurements_sha1 ascii_runtime_measurements_sha256 binary_runtime_measurements binary_runtime_measurements_tpm_alg_27 binary_runtime_measurements_sha1 binary_runtime_measurements_sha256 policy runtime_measurements_count violations [1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf [2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53039

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7bbfb55a966d [CAUSE] ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a user-controlled group block before ocfs2_verify_group_and_input() validates that block number. That helper is only valid for newly allocated metadata and asserts that the block is not already present in the chosen metadata cache. The code also uses INODE_CACHE(inode) even though the group descriptor belongs to main_bm_inode and later journal accesses use that cache context instead. [FIX] Validate the on-disk group descriptor before caching it, then add it to the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the validation failure path separate from the later cleanup path so we only remove the buffer from that cache after it has actually been inserted. This keeps the group buffer lifetime consistent across validation, journaling, and cleanup.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53040

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate bg_bits during freefrag scan [BUG] A crafted filesystem can trigger an out-of-bounds bitmap walk when OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT. BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline] BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline] BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754 Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xd1/0x650 mm/kasan/report.c:482 kasan_report+0xfb/0x140 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 [inline] kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200 __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] test_bit_le include/asm-generic/bitops/le.h:21 [inline] ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline] ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline] ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754 ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828 ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 ... [CAUSE] ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the bitmap scan limit. The coherent path reads group descriptors through ocfs2_read_group_descriptor(), which validates the descriptor before use. The non-coherent path uses ocfs2_read_blocks_sync() instead and skips that validation, so an impossible bg_bits value can drive the bitmap walk past the end of the block. [FIX] Compute the bitmap capacity from the filesystem format with ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds that limit, and clamp the scan to the computed capacity. This keeps the freefrag report going while avoiding reads beyond the buffer.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53041

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix listxattr handling when the buffer is full [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_object_size include/linux/ucopysize.h:22 [inline] check_copy_size include/linux/ucopysize.h:59 [inline] copy_to_user include/linux/uaccess.h:219 [inline] listxattr+0xb0/0x170 fs/xattr.c:926 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x137/0x320 fs/xattr.c:988 __do_sys_listxattr fs/xattr.c:1001 [inline] __se_sys_listxattr fs/xattr.c:998 [inline] __x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998 ... [CAUSE] Commit 936b8834366e ("ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().") replaced the old per-handler list accounting with ocfs2_xattr_list_entry(), but it kept using size == 0 to detect probe mode. That assumption stops being true once ocfs2_listxattr() finishes the inline-xattr pass. If the inline names fill the caller buffer exactly, the block-xattr pass runs with a non-NULL buffer and a remaining size of zero. ocfs2_xattr_list_entry() then skips the bounds check, keeps counting block names, and returns a positive size larger than the supplied buffer. [FIX] Detect probe mode by testing whether the destination buffer pointer is NULL instead of whether the remaining size is zero. That restores the pre-refactor behavior and matches the OCFS2 getxattr helpers. Once the remaining buffer reaches zero while more names are left, the block-xattr pass now returns -ERANGE instead of reporting a size larger than the allocated list buffer.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53042

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so `cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls `fwctl_register()` and then `device_add()`, fwctl_class is not yet registered because fwctl_init() hasn't run, causing `class_to_subsys()` to return NULL and skip knode_class initialization. On device removal, `class_to_subsys()` returns non-NULL, and `device_del()` calls `klist_del()` on the uninitialized knode, triggering a NULL pointer dereference.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53043

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-of-bounds reads past the 1024-byte qr_regions buffer. - Patch 2 fixes an off-by-one in the local-vs-remote comparison loop, which uses '<=' instead of '<', reading one entry past the valid range even when qr_numregions is within bounds. This patch (of 2): The qr_numregions field from a DLM_QUERY_REGION network message is used directly as loop bounds in dlm_match_regions() without checking against O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS (32) entries, a crafted message with qr_numregions > 32 causes out-of-bounds reads past the qr_regions buffer. Add a bounds check for qr_numregions before entering the loops.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xCRITICAL 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53044

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup.

Published: 2026-06-24Modified: 2026-07-14

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53045

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: memory: tegra124-emc: Fix dll_change check The code checking whether the specified memory timing enables DLL in the EMRS register was reversed. DLL is enabled if bit A0 is low. Fix the check.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53046

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine ksmbd_crypt_message() sets a NULL completion callback on AEAD requests and does not handle the -EINPROGRESS return code from async hardware crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns -EINPROGRESS, ksmbd treats it as an error and immediately frees the request while the hardware DMA operation is still in flight. The DMA completion callback then dereferences freed memory, causing a NULL pointer crash: pc : qce_skcipher_done+0x24/0x174 lr : vchan_complete+0x230/0x27c ... el1h_64_irq+0x68/0x6c ksmbd_free_work_struct+0x20/0x118 [ksmbd] ksmbd_exit_file_cache+0x694/0xa4c [ksmbd] Use the standard crypto_wait_req() pattern with crypto_req_done() as the completion callback, matching the approach used by the SMB client in fs/smb/client/smb2ops.c. This properly handles both synchronous engines (immediate return) and async engines (-EINPROGRESS followed by callback notification).

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53047

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: efi/capsule-loader: fix incorrect sizeof in phys array reallocation The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses sizeof(phys_addr_t ) instead of sizeof(phys_addr_t), which might be causing an undersized allocation. The allocation is also inconsistent with the initial array allocation in efi_capsule_open() that allocates one entry with sizeof(phys_addr_t), and the efi_capsule_write() function that stores phys_addr_t values (not pointers) via page_to_phys(). On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t ), this goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but pointers are 32-bit, this allocates half the required space, which might lead to a heap buffer overflow when storing physical addresses. This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader: fix incorrect allocation size") which fixed the same issue at the initial allocation site.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53048

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gfs2: prevent NULL pointer dereference during unmount When flushing out outstanding glock work during an unmount, gfs2_log_flush() can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53049

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush().

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53050

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: quota: Fix race of dquot_scan_active() with quota deactivation dquot_scan_active() can race with quota deactivation in quota_release_workfn() like: CPU0 (quota_release_workfn) CPU1 (dquot_scan_active) ============================== ============================== spin_lock(&dq_list_lock); list_replace_init( &releasing_dquots, &rls_head); /* dquot X on rls_head, dq_count == 0, DQ_ACTIVE_B still set / spin_unlock(&dq_list_lock); synchronize_srcu(&dquot_srcu); spin_lock(&dq_list_lock); list_for_each_entry(dquot, &inuse_list, dq_inuse) { / finds dquot X */ dquot_active(X) -> true atomic_inc(&X->dq_count); } spin_unlock(&dq_list_lock); spin_lock(&dq_list_lock); dquot = list_first_entry(&rls_head); WARN_ON_ONCE(atomic_read(&dquot->dq_count)); The problem is not only a cosmetic one as under memory pressure the caller of dquot_scan_active() can end up working on freed dquot. Fix the problem by making sure the dquot is removed from releasing list when we acquire a reference to it.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53051

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on When PERST# is deasserted twice (assert -> deassert -> assert -> deassert), a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc (PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify() and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers on the controller core. The call chain that causes the timeout: pex_ep_event_pex_rst_deassert() pci_epc_deinit_notify() pci_epf_test_epc_deinit() pci_epf_test_clear_bar() pci_epc_clear_bar() dw_pcie_ep_clear_bar() __dw_pcie_ep_reset_bar() dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register reset_control_deassert(pcie->core_rst) <- Core powered on HERE The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only accessible after the controller core is powered on via reset_control_deassert(pcie->core_rst). Accessing them before this point results in a CBB timeout because the hardware is not yet operational. Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to after reset_control_deassert(pcie->core_rst), ensuring the controller is fully powered on before any DBI register accesses occur.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53052

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: qdsp6: topology: check widget type before accessing data Check widget type before accessing the private data, as this could a virtual widget which is no associated with a dsp graph, container and module. Accessing witout check could lead to incorrect memory access.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53053

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix clone_alias() to use the original device's devid Currently clone_alias() assumes first argument (pdev) is always the original device pointer. This function is called by pci_for_each_dma_alias() which based on topology decides to send original or alias device details in first argument. This meant that the source devid used to look up and copy the DTE may be incorrect, leading to wrong or stale DTE entries being propagated to alias device. Fix this by passing the original pdev as the opaque data argument to both the direct clone_alias() call and pci_for_each_dma_alias(). Inside clone_alias(), retrieve the original device from data and compute devid from it.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-53054

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix VM_BIND UNMAP locking Wrong argument meant that the objs involved in UNMAP ops were not always getting locked. Since _NO_SHARE objs share a common resv with the VM (which is always locked) this would only show up with non-_NO_SHARE BOs. Patchwork: https://patchwork.freedesktop.org/patch/713898/

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53055

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec2 - prevent req used-after-free for sec During packet transmission, if the system is under heavy load, the hardware might complete processing the packet and free the request memory (req) before the transmission function finishes. If the software subsequently accesses this req, a use-after-free error will occur. The qp_ctx memory exists throughout the packet sending process, so replace the req with the qp_ctx.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53056

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: fix mismatch between power and frequency During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops the MMCX rail to MIN_SVS while the core clock frequency remains at its original (highest) rate. When runtime resume re-enables the clock, this may result in a mismatch between the rail voltage and the clock rate. For example, in the DPU bind path, the sequence could be: cpu0: dev_sync_state -> rpmhpd_sync_state cpu1: dpu_kms_hw_init timeline 0 ------------------------------------------------> t After rpmhpd_sync_state, the voltage performance is no longer guaranteed to stay at the highest level. During dpu_kms_hw_init, calling dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to fall to MIN_SVS while the core clock is still at its maximum frequency. When the power is re-enabled, only the clock is enabled, leading to a situation where the MMCX rail is at MIN_SVS but the core clock is at its highest rate. In this state, the rail cannot sustain the clock rate, which may cause instability or system crash. Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend to ensure the correct vote is restored when DPU resumes. Patchwork: https://patchwork.freedesktop.org/patch/710077/

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53057

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Add IOTINVAL after updating DDT/PDT entries Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache invalidations after updating DDT or PDT entries, as mandated by the RISC-V IOMMU specification (Section 6.3.1 and 6.3.2).

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-53058

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable() In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read() in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit NULL pointer while trying to access the mutex. We need the connector to be set before that. Unlike in legacy cases with flag !DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised in bridge_attach(), so add the mhdp->connector_ptr in device structure to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and !DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to avoid possible NULL pointer dereference in recovery paths like modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53059

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

Published: 2026-06-24Modified: 2026-08-12

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53060

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm cache metadata: fix memory leak on metadata abort retry When failing to acquire the root_lock in dm_cache_metadata_abort because the block_manager is read-only, the temporary block_manager created outside the root_lock is not properly released, causing a memory leak. Reproduce steps: This can be reproduced by reloading a new table while the metadata is read-only. While the second call to dm_cache_metadata_abort is caused by lack of support for table preload in dm-cache, mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), it exposes the memory leak in dm_cache_metadata_abort when the function is called multiple times. Specifically, dm-cache fails to sync the new cache object's mode during preresume, creating the reproducer condition. This issue could also occur through concurrent metadata_operation_failed calls due to races in cache mode updates, but the table preload scenario below provides a reliable reproducer. 1. Create a cache device with some faulty trailing metadata blocks dmsetup create cmeta < unreferenced object 0xffff8880080c2010 (size 16): comm "dmsetup", pid 132, jiffies 4294982580 hex dump (first 16 bytes): 00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ... backtrace (crc 3118f31c): kmemleak_alloc+0x28/0x40 __kmalloc_cache_noprof+0x3d9/0x510 dm_block_manager_create+0x51/0x140 dm_cache_metadata_abort+0x85/0x320 metadata_operation_failed+0x103/0x1e0 cache_preresume+0xacd/0xe70 dm_table_resume_targets+0xd3/0x320 __dm_resume+0x1b/0xf0 dm_resume+0x127/0x170

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53061

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix dirty mapping checking in passthrough mode switching As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), dm-cache assumed table reload occurs after suspension, while LVM's table preload breaks this assumption. The dirty mapping check for passthrough mode was designed around this assumption and is performed during table creation, causing the check to fail with preload while metadata updates are ongoing. This risks loading dirty mappings into passthrough mode, resulting in data loss. Reproduce steps: 1. Create a writeback cache with zero migration_threshold to produce dirty mappings dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \ 2 migration_threshold 0" 2. Preload a table in passthrough mode dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" 3. Write to the first cache block to make it dirty fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \ --direct=1 --size=64k 4. Resume the inactive table. Now it's possible to load the dirty block into passthrough mode. dmsetup resume cache Fix by moving the checks to the preresume phase to support table preloading. Also remove the unused function dm_cache_metadata_all_clean.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53062

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --size=64m --direct=1 nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers. fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \ --direct=1 --numjobs=2 --randrepeat=0 --size=64m 5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted"

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53063

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix write hang in passthrough mode The invalidate_remove() function has incomplete logic for handling write hit bios after cache invalidation. It sets up the remapping for the overwrite_bio but then drops it immediately without submission, causing write operations to hang. Fix by adding a new invalidate_committed() continuation that submits the remapped writes to the cache origin after metadata commit completes, while using the overwrite_endio hook to ensure proper completion sequencing. This maintains existing coherency. Also improve error handling in invalidate_complete() to preserve the original error status instead of using bio_io_error() unconditionally.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53064

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix null-deref with concurrent writes in passthrough mode In passthrough mode, when dm-cache starts to invalidate a cache entry and bio prison cell lock fails due to concurrent write to the same cached block, mg->cell remains NULL. The error path in invalidate_complete() attempts to unlock and free the cell unconditionally, causing a NULL pointer dereference: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPT RIP: 0010:dm_cell_unlock_v2+0x3f/0x210 Call Trace: invalidate_complete+0xef/0x430 map_bio+0x130f/0x1a10 cache_map+0x320/0x6b0 __map_bio+0x458/0x510 dm_submit_bio+0x40e/0x16d0 __submit_bio+0x419/0x870 Reproduce steps: 1. Create a cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Promote the first data block into cache fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \ --direct=1 --size=64k 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the first cached block concurrently fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \ --randrepeat=0 --direct=1 --numjobs=2 --size 64k Fix by checking if mg->cell is valid before attempting to unlock it.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53065

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: use managed regmap_field allocations The regmap_field objects allocated at player init are never freed and may leak resources if the driver is removed. Switch to devm_regmap_field_alloc() to automatically limit the lifetime of the allocations the lifetime of the device.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53066

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: backend: fix error pointer dereference The function drm_atomic_get_plane_state() can return an error pointer and is not checked for it. Add error pointer check. Detected by Smatch: drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error: 'plane_state' dereferencing possible ERR_PTR()

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53067

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc pci_epf_alloc_doorbell() stores the allocated doorbell message array in epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation fails, the array is freed but the EPF state may still point to freed memory. Clear epf->db_msg and epf->num_db on the MSI allocation failure path so that later cleanup cannot double-free the array and callers can retry allocation. Also return -EBUSY when doorbells have already been allocated to prevent leaking or overwriting an existing allocation.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53068

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: drm/komeda: fix integer overflow in AFBC framebuffer size check The AFBC framebuffer size validation calculates the minimum required buffer size by adding the AFBC payload size to the framebuffer offset. This addition is performed without checking for integer overflow. If the addition oveflows, the size check may incorrectly succed and allow userspace to provide an undersized drm_gem_object, potentially leading to out-of-bounds memory access. Add usage of check_add_overflow() to safely compute the minimum required size and reject the framebuffer if an overflow is detected. This makes the AFBC size validation more robust against malformed. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53069

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via xdp_master_redirect(). Full decoded trace: https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73 bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU counter that bonding only allocates in bond_open() when the mode is round-robin. If the bond device was never brought up, rr_tx_counter stays NULL. The XDP redirect path can still reach that code on a bond that was never opened: bpf_master_redirect_enabled_key is a global static key, so as soon as any bond device has native XDP attached, the XDP_TX -> xdp_master_redirect() interception is enabled for every slave system-wide. The path xdp_master_redirect() -> bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() -> bond_rr_gen_slave_id() then runs against a bond that has no rr_tx_counter and crashes. Fix this in the generic xdp_master_redirect() by refusing to call into the master's ->ndo_xdp_get_xmit_slave() when the master device is not up. IFF_UP is only set after ->ndo_open() has successfully returned, so this reliably excludes masters whose XDP state has not been fully initialized. Drop the frame with XDP_ABORTED so the exception is visible via trace_xdp_exception() rather than silently falling through. This is not specific to bonding: any current or future master that defers XDP state allocation to ->ndo_open() is protected.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53070

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: sctp: disable BH before calling udp_tunnel_xmit_skb() udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to tunnel xmit functions"), on the path: udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit() dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU. Without local_bh_disable(), the context may move between CPUs, which can break the inc/dec pairing. This may lead to incorrect recursion level detection and cause packets to be dropped in ip(6)_tunnel_xmit() or __dev_queue_xmit(). Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths. In my testing, after enabling the SCTP over UDP: # ip net exec ha sysctl -w net.sctp.udp_port=9899 # ip net exec ha sysctl -w net.sctp.encap_port=9899 # ip net exec hb sysctl -w net.sctp.udp_port=9899 # ip net exec hb sysctl -w net.sctp.encap_port=9899 # ip net exec ha iperf3 -s - without this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender [ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver - with this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53071

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53072

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53073

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on error When hci_register_dev() fails in hci_uart_register_dev() HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu) and setting hu->hdev to NULL. This means incoming UART data will reach the protocol-specific recv handler in hci_uart_tty_receive() after resources are freed. Clear HCI_UART_PROTO_INIT with a write lock before calling hu->proto->close() and setting hu->hdev to NULL. The write lock ensures all active readers have completed and no new reader can enter the protocol recv path before resources are freed. This allows the protocol-specific recv functions to remove the "HCI_UART_REGISTERED" guard without risking a null pointer dereference if hci_register_dev() fails.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53074

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb bpf_prog_test_run_skb() calls eth_type_trans() first and then uses skb->protocol to initialize sk family and address fields for the test run. For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb) even when the provided test input only contains an Ethernet header. Reject the input earlier if the Ethernet frame carries IPv4/IPv6 EtherType but the L3 header is too short. Fold the IPv4/IPv6 header length checks into the existing protocol switch and return -EINVAL before accessing the network headers.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53075

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ppp: require CAP_NET_ADMIN in target netns for unattached ioctls /dev/ppp open is currently authorized against file->f_cred->user_ns, while unattached administrative ioctls operate on current->nsproxy->net_ns. As a result, a local unprivileged user can create a new user namespace with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace, and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against an inherited network namespace. Require CAP_NET_ADMIN in the user namespace that owns the target network namespace before handling unattached PPP administrative ioctls. This preserves normal pppd operation in the network namespace it is actually privileged in, while rejecting the userns-only inherited-netns case.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-53076

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix OOB in pcpu_init_value An out-of-bounds read occurs when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the same value_size that is not rounded up to 8 bytes. The issue happens when: 1. A CGROUP_STORAGE map is created with value_size not aligned to 8 bytes (e.g., 4 bytes) 2. A pcpu map is created with the same value_size (e.g., 4 bytes) 3. Update element in 2 with data in 1 pcpu_init_value assumes that all sources are rounded up to 8 bytes, and invokes copy_map_value_long to make a data copy, However, the assumption doesn't stand since there are some cases where the source may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data. the verifier verifies exactly the size that the source claims, not the size rounded up to 8 bytes by kernel, an OOB happens when the source has only 4 bytes while the copy size(4) is rounded up to 8.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53077

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/rds: Restrict use of RDS/IB to the initial network namespace Prevent using RDS/IB in network namespaces other than the initial one. The existing RDS/IB code will not work properly in non-initial network namespaces.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53078

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg, the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the destination register in the !fullsock / !locked_tcp_sock path. Both macros borrow a temporary register to check is_fullsock / is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with a request_sock), dst_reg should be zeroed but is not, leaving the stale ctx pointer: - SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer, leading to stack-out-of-bounds access in helpers like bpf_skc_to_tcp6_sock(). - SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the verifier believes is a SCALAR_VALUE, leaking a kernel pointer. Fix both macros by: - Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the added instruction. - Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register restore in the !fullsock path, placed after the restore because dst_reg == src_reg means we need src_reg intact to read ctx->temp.

Published: 2026-06-24Modified: 2026-08-03

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53079

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net_sched: fix skb memory leak in deferred qdisc drops When the network stack cleans up the deferred list via qdisc_run_end(), it operates on the root qdisc. If the root qdisc do not implement the TCQ_F_DEQUEUE_DROPS flag the packets queue to free are never freed and gets stranded on the child's local to_free list. Fix this by making qdisc_dequeue_drop() aware of the root qdisc. It fetches the root qdisc and check for the TCQ_F_DEQUEUE_DROPS flag. If the flag is present, the packet is appended directly to the root's to_free list. Otherwise, drop it directly as it was done before the optimization was implemented.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53080

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL dereference of "old" filters before change() Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") TC filters are added to a shared block and published to datapath before their ->change() function is called. This is a problem for cls_fw: an invalid filter created with the "old" method can still classify some packets before it is destroyed by the validation logic added by Xiang. Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0 can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 irq event stamp: 1045778 hardirqs last enabled at (1045784): [] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [] __dev_queue_xmit+0x78/0x14d0 Then, because of the value in the packet's mark, dereference on 'q->handle' with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...] Skip "old-style" classification on shared blocks, so that the NULL dereference is fixed and WARN_ON() is not hit anymore in the short lifetime of invalid cls_fw "old-style" filters. [1] https://sashiko.dev/#/patchset/2 ---truncated---

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53081

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53082

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: hamradio: 6pack: fix uninit-value in sixpack_receive_buf sixpack_receive_buf() does not properly skip bytes with TTY error flags. The while loop iterates through the flags buffer but never advances the data pointer (cp), and passes the original count (including error bytes) to sixpack_decode(). This causes sixpack_decode() to process bytes that should have been skipped due to TTY errors. The TTY layer does not guarantee that cp[i] holds a meaningful value when fp[i] is set, so passing those positions to sixpack_decode() results in KMSAN reporting an uninit-value read. Fix this by processing bytes one at a time, advancing cp on each iteration, and only passing valid (non-error) bytes to sixpack_decode(). This matches the pattern used by slip_receive_buf() and mkiss_receive_buf() for the same purpose.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53083

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix RCU stall in bpf_fd_array_map_clear() Add a missing cond_resched() in bpf_fd_array_map_clear() loop. For PROG_ARRAY maps with many entries this loop calls prog_array_map_poke_run() per entry which can be expensive, and without yielding this can cause RCU stalls under load: rcu: Stack dump where RCU GP kthread last ran: CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef) Workqueue: events prog_array_map_clear_deferred RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246 Call Trace: prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096 __fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925 bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline] prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141 process_one_work+0x898/0x19d0 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x770/0x10b0 kernel/workqueue.c:3400 kthread+0x465/0x880 kernel/kthread.c:464 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53084

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: return VMA snapshot from task_vma iterator Holding the per-VMA lock across the BPF program body creates a lock ordering problem when helpers acquire locks that depend on mmap_lock: vm_lock -> i_rwsem -> mmap_lock -> vm_lock Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then drop the lock before returning. The BPF program accesses only the snapshot. The verifier only trusts vm_mm and vm_file pointers (see BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference- counted with get_file() under the lock and released via fput() on the next iteration or in _destroy(). vm_mm is already correct because lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers are left as-is by memcpy() since the verifier treats them as untrusted.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53085

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53086

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix racing timeout handler The bcmgenet_timeout handler tries to take down all tx queues when a single queue times out. This is over zealous and causes many race conditions with queues that are still chugging along. Instead lets only restart the timed out queue.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53087

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix leaking free_bds While reclaiming the tx queue we fast forward the write pointer to drop any data in flight. These dropped frames are not added back to the pool of free bds. We also need to tell the netdev that we are dropping said data.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53088

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix off-by-one in bcmgenet_put_txcb The write_ptr points to the next open tx_cb. We want to return the tx_cb that gets rewinded, so we must rewind the pointer first then return the tx_cb that it points to. That way the txcb can be correctly cleaned up.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53089

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in offloaded map/prog info fill When querying info for an offloaded BPF map or program, bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns() obtain the network namespace with get_net(dev_net(offmap->netdev)). However, the associated netdev's netns may be racing with teardown during netns destruction. If the netns refcount has already reached 0, get_net() performs a refcount_t increment on 0, triggering: refcount_t: addition on 0; use-after-free. Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains valid, they cannot prevent the netns refcount from reaching zero. Fix this by using maybe_get_net() instead of get_net(). maybe_get_net() uses refcount_inc_not_zero() and returns NULL if the refcount is already zero, which causes ns_get_path_cb() to fail and the caller to return -ENOENT -- the correct behavior when the netns is being destroyed.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53090

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Published: 2026-06-24Modified: 2026-08-03

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53091

HIGH8.4

In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 8.4

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:H

References

CVE-2026-53092

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix linked reg delta tracking when src_reg == dst_reg Consider the case of rX += rX where src_reg and dst_reg are pointers to the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first modifies the dst_reg in-place, and later in the delta tracking, the subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the post-{add,sub} value instead of the original source. This is problematic since it sets an incorrect delta, which sync_linked_regs() then propagates to linked registers, thus creating a verifier-vs-runtime mismatch. Fix it by just skipping this corner case.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53093

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix error pointer dereference The function brcmf_chip_add_core() can return an error pointer and is not checked. Add checks for error pointer. Detected by Smatch: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() [add missing wifi: prefix]

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53094

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stale offload->prog pointer after constant blinding When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes JIT compilation with constant blinding enabled (bpf_jit_harden >= 2), bpf_jit_blind_constants() clones the program. The original prog is then freed in bpf_jit_prog_release_other(), which updates aux->prog to point to the surviving clone, but fails to update offload->prog. This leaves offload->prog pointing to the freed original program. When the network namespace is subsequently destroyed, cleanup_net() triggers bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls __bpf_prog_offload_destroy(offload->prog). Accessing the freed prog causes a page fault: BUG: unable to handle page fault for address: ffffc900085f1038 Workqueue: netns cleanup_net RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80 Call Trace: __bpf_offload_dev_netdev_unregister+0x257/0x350 bpf_dev_bound_netdev_unregister+0x4a/0x90 unregister_netdevice_many_notify+0x2a2/0x660 ... cleanup_net+0x21a/0x320 The test sequence that triggers this reliably is: 1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden) 2. Run xdp_metadata selftest, which creates a dev-bound-only XDP program on a veth inside a netns (./test_progs -t xdp_metadata) 3. cleanup_net -> page fault in __bpf_prog_offload_destroy Dev-bound-only programs are unique in that they have an offload structure but go through the normal JIT path instead of bpf_prog_offload_compile(). This means they are subject to constant blinding's prog clone-and-replace, while also having offload->prog that must stay in sync. Fix this by updating offload->prog in bpf_jit_prog_release_other(), alongside the existing aux->prog update. Both are back-pointers to the prog that must be kept in sync when the prog is replaced.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53095

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix abuse of kprobe_write_ctx via freplace uprobe programs are allowed to modify struct pt_regs. Since the actual program type of uprobe is KPROBE, it can be abused to modify struct pt_regs via kprobe+freplace when the kprobe attaches to kernel functions. For example, SEC("?kprobe") int kprobe(struct pt_regs regs) { return 0; } SEC("?freplace") int freplace_kprobe(struct pt_regs regs) { regs->di = 0; return 0; } freplace_kprobe prog will attach to kprobe prog. kprobe prog will attach to a kernel function. Without this patch, when the kernel function runs, its first arg will always be set as 0 via the freplace_kprobe prog. To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow attaching freplace programs on kprobe programs with different kprobe_write_ctx values.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53096

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Use RCU-safe iteration in dev_map_redirect_multi() SKB path The DEVMAP_HASH branch in dev_map_redirect_multi() uses hlist_for_each_entry_safe() to iterate hash buckets, but this function runs under RCU protection (called from xdp_do_generic_redirect_map() in softirq context). Concurrent writers (__dev_map_hash_update_elem, dev_map_hash_delete_elem) modify the list using RCU primitives (hlist_add_head_rcu, hlist_del_rcu). hlist_for_each_entry_safe() performs plain pointer dereferences without rcu_dereference(), missing the acquire barrier needed to pair with writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64, POWER), a reader can observe a partially-constructed node. It also defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race detection. Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held() as the lockdep condition, consistent with the rcu_dereference_check() used in the DEVMAP (non-hash) branch of the same functions. Also fix the same incorrect lockdep_is_held(&dtab->index_lock) condition in dev_map_enqueue_multi(), where the lock is not held either.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53097

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work() When the mt7996 pci chip is detaching, the mt7996_crash_data is released in mt7996_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7996_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7996_pci_remove() | mt7996_sys_recovery_set() mt7996_unregister_device() | mt7996_reset() mt7996_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7996_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7996_unregister_device() to synchronize with any pending or executing dump work.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53098

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work() When the mt7915 pci chip is detaching, the mt7915_crash_data is released in mt7915_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7915_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7915_pci_remove() | mt7915_sys_recovery_set() mt7915_unregister_device() | mt7915_reset() mt7915_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7915_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7915_unregister_device() to synchronize with any pending or executing dump work.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53099

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Switch CONFIG_CFI_CLANG to CONFIG_CFI This was renamed in commit 23ef9d439769 ("kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI") as it is now a compiler-agnostic option. Using the wrong name results in the code getting compiled out. Meaning the CFI failures for btf_dtor_kfunc_t would still trigger.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53100

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix deadlock in remain-on-channel mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel() while already holding dev->mutex. Since mt76_set_channel() also acquires dev->mutex, this results in a deadlock. Use __mt76_set_channel() instead of mt76_set_channel(). Add cancel_delayed_work_sync() for mac_work before acquiring the mutex in mt76_remain_on_channel() to prevent a secondary deadlock with the mac_work workqueue.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53101

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() -> mt7921_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53102

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req() mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to be freed eventually by mt76_mcu_skb_send_msg(). However, currently if an intermediate function fails before sending, the allocated skb is leaked. Specifically, mt76_connac_mcu_sta_wed_update() and mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory leak in the error path. Fix this by explicitly freeing the skb in these error paths. Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error") made a similar change. Compile tested only. Issue found using a prototype static analysis tool and code review.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53103

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() -> mt7925_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership.

Published: 2026-06-24Modified: 2026-07-21

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53104

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak destroying device All MT76 rx queues have an associated page_pool even if the queue is not associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the page_pool running mt76_dma_cleanup routine during module unload. Moreover returns pages to the page pool if WED is not enabled for WED RRO queues.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53105

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL vif dereference in mt7925_mac_write_txwi Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to avoid a potential kernel panic in scenarios where `vif` might not be initialized.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53106

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Do not allow deleting local storage in NMI Currently, local storage may deadlock when deferring freeing selem or local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace() in NMI or reentrant. Since deleting selem in NMI is an unlikely use case, partially mitigate it by returning error when calling from bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible to deadlock through reentrant. A full mitigation requires returning error when irqs_disabled() is true, which, however is too heavy-handed for bpf_xxx_storage_delete(). The long-term solution requires _nolock versions of call_rcu. Another possible solution is to defer the free through irq_work [0], but it would grow the size of selem, which is non-ideal. The check is only needed in bpf_selem_unlink(), which is used by helpers and syscalls. bpf_selem_unlink_nofail() is fine as it is called during map and owner tear down that never run in NMI or reentrant. [0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53107

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: don't kill URBs in interrupt context Serialization for the TX path was enforced by calling usb_kill_urb()/usb_kill_anchored_urbs(), to prevent transmission before a previous URB was completed. usb_tx_block() can be called from interrupt context (e.g. in the HCD giveback path), so we can't always use it to kill in-flight URBs. Prevent sleeping during interrupt context by checking the tx_submitted anchor for existing URBs. We now return -EBUSY, to indicate there's a pending request.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53108

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unmap race with PMD migration entries The following race is possible with migration swap entries or device-private THP entries. e.g. when move_pages is called on a PMD THP page, then there maybe an intermediate state, where PMD entry acts as a migration swap entry (pmd_present() is true). Then if an munmap happens at the same time, then this VM_BUG_ON() can happen in pmdp_huge_get_and_clear_full(). This patch fixes that. Thread A: move_pages() syscall add_folio_for_migration() mmap_read_lock(mm) folio_isolate_lru(folio) mmap_read_unlock(mm) do_move_pages_to_node() migrate_pages() try_to_migrate_one() spin_lock(ptl) set_pmd_migration_entry() pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn set_pmd_at() # PMD: migration swap entry (pmd_present=0) spin_unlock(ptl) [page copy phase] # <--- RACE WINDOW --> Thread B: munmap() mmap_write_downgrade(mm) unmap_vmas() -> zap_pmd_range() zap_huge_pmd() __pmd_trans_huge_lock() pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry) pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl pmdp_huge_get_and_clear_full() VM_BUG_ON(!pmd_present(*pmdp)) # HITS! [ 287.738700][ T1867] ------------[ cut here ]------------ [ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187! cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0] pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c lr: c000000000645dec: zap_huge_pmd+0xb0/0x868 sp: c00000044037f790 msr: 800000000282b033 current = 0xc0000004032c1a00 paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09 pid = 1867, comm = a.out kernel BUG at :187! Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026 enter ? for help [link register ] c000000000645dec zap_huge_pmd+0xb0/0x868 [c00000044037f790] c00000044037f7d0 (unreliable) [c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868 [c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40 [c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8 [c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128 [c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310 [c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238 [c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8 [c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40 [c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350 [c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec ---- Exception: 3000 (System Call Vectored) at 0000000010064a2c SP (7fff9b1ee9c0) is in userspace 0:mon> zh commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"), enabled migration for device-private PMD entries. Hence this is one other path where this warning could get trigger from. ------------[ cut here ]------------ WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905 Modules linked in: test_hmm CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284 LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4 Call Trace: [c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable) [c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498 [c000000604707760] [c00000000063e5a4] migrate_vma_col ---truncated---

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53109

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy powerpc uses pt_frag_refcount as a reference counter for tracking it's pte and pmd page table fragments. For PTE table, in case of Hash with 64K pagesize, we have 16 fragments of 4K size in one 64K page. Patch series [1] "mm: free retracted page table by RCU" added pte_free_defer() to defer the freeing of PTE tables when retract_page_tables() is called for madvise MADV_COLLAPSE on shmem range. [1]: https://lore.kernel.org/all/7cd843a9-aa80-14f-5eb2-33427363c20@google.com/ pte_free_defer() sets the active flag on the corresponding fragment's folio & calls pte_fragment_free(), which reduces the pt_frag_refcount. When pt_frag_refcount reaches 0 (no active fragment using the folio), it checks if the folio active flag is set, if set, it calls call_rcu to free the folio, it the active flag is unset then it calls pte_free_now(). Now, this can lead to following problem in a corner case... [ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62 [ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62 [ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff) [ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000 [ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000 [ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 265.362572][ T183] Modules linked in: [ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY [ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries [ 265.364908][ T183] Call Trace: [ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable) [ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8 [ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08 [ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310 [ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218 [ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820 [ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300 [ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508 [ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148 [ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178 [ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0 [ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec The bad page state error occurs when such a folio gets freed (with active flag set), from do_exit() path in parallel. ... this can happen when the pte fragment was allocated from this folio, but when all the fragments get freed, the pte_frag_refcount still had some unused fragments. Now, if this process exits, with such folio as it's cached pte_frag in mm->context, then during pte_frag_destroy(), we simply call pagetable_dtor() and pagetable_free(), meaning it doesn't clear the active flag. This, can lead to the above bug. Since we are anyway in do_exit() path, then if the refcount is 0, then I guess it should be ok to simply clear the folio active flag before calling pagetable_dtor() & pagetable_free().

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53110

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Zero-extend bpf prog return values and kfunc arguments s390x ABI requires callers to zero-extend unsigned arguments and sign-extend signed arguments, and callees to zero-extend unsigned return values and sign-extend signed return values. s390 BPF JIT currently implements only sign extension. Fix this omission and implement zero extension too.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53111

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: test_run: Fix the null pointer dereference issue in bpf_lwt_xmit_push_encap The bpf_lwt_xmit_push_encap helper needs to access skb_dst(skb)->dev to calculate the needed headroom: err = skb_cow_head(skb, len + LL_RESERVED_SPACE(skb_dst(skb)->dev)); But skb->_skb_refdst may not be initialized when the skb is set up by bpf_prog_test_run_skb function. Executing bpf_lwt_push_ip_encap function in this scenario will trigger null pointer dereference, causing a kernel crash as Yinhao reported: [ 105.186365] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 105.186382] #PF: supervisor read access in kernel mode [ 105.186388] #PF: error_code(0x0000) - not-present page [ 105.186393] PGD 121d3d067 P4D 121d3d067 PUD 106c83067 PMD 0 [ 105.186404] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 105.186412] CPU: 3 PID: 3250 Comm: poc Kdump: loaded Not tainted 6.19.0-rc5 #1 [ 105.186423] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 105.186427] RIP: 0010:bpf_lwt_push_ip_encap+0x1eb/0x520 [ 105.186443] Code: 0f 84 de 01 00 00 0f b7 4a 04 66 85 c9 0f 85 47 01 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8b 73 58 48 83 e6 fe <48> 8b 36 0f b7 be ec 00 00 00 0f b7 b6 e6 00 00 00 01 fe 83 e6 f0 [ 105.186449] RSP: 0018:ffffbb0e0387bc50 EFLAGS: 00010246 [ 105.186455] RAX: 000000000000004e RBX: ffff94c74e036500 RCX: ffff94c74874da00 [ 105.186460] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94c74e036500 [ 105.186463] RBP: 0000000000000001 R08: 0000000000000002 R09: 0000000000000000 [ 105.186467] R10: ffffbb0e0387bd50 R11: 0000000000000000 R12: ffffbb0e0387bc98 [ 105.186471] R13: 0000000000000014 R14: 0000000000000000 R15: 0000000000000002 [ 105.186484] FS: 00007f166aa4d680(0000) GS:ffff94c8b7780000(0000) knlGS:0000000000000000 [ 105.186490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 105.186494] CR2: 0000000000000000 CR3: 000000015eade001 CR4: 0000000000770ee0 [ 105.186499] PKRU: 55555554 [ 105.186502] Call Trace: [ 105.186507] [ 105.186513] bpf_lwt_xmit_push_encap+0x2b/0x40 [ 105.186522] bpf_prog_a75eaad51e517912+0x41/0x49 [ 105.186536] ? kvm_clock_get_cycles+0x18/0x30 [ 105.186547] ? ktime_get+0x3c/0xa0 [ 105.186554] bpf_test_run+0x195/0x320 [ 105.186563] ? bpf_test_run+0x10f/0x320 [ 105.186579] bpf_prog_test_run_skb+0x2f5/0x4f0 [ 105.186590] __sys_bpf+0x69c/0xa40 [ 105.186603] __x64_sys_bpf+0x1e/0x30 [ 105.186611] do_syscall_64+0x59/0x110 [ 105.186620] entry_SYSCALL_64_after_hwframe+0x76/0xe0 [ 105.186649] RIP: 0033:0x7f166a97455d Temporarily add the setting of skb->_skb_refdst before bpf_test_run to resolve the issue.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53112

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: pci: fix possible use-after-free caused by unfinished irq_prepare_bcn_tasklet The irq_prepare_bcn_tasklet is initialized in rtl_pci_init() and scheduled when RTL_IMR_BCNINT interrupt is triggered by hardware. But it is never killed in rtl_pci_deinit(). When the rtlwifi card probe fails or is being detached, the ieee80211_hw is deallocated. However, irq_prepare_bcn_tasklet may still be running or pending, leading to use-after-free when the freed ieee80211_hw is accessed in _rtl_pci_prepare_bcn_tasklet(). Similar to irq_tasklet, add tasklet_kill() in rtl_pci_deinit() to ensure that irq_prepare_bcn_tasklet is properly terminated before the ieee80211_hw is released. The issue was identified through static analysis.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53113

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leaks in beacon template setup The functions ath11k_mac_setup_bcn_tmpl_ema() and ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates but fail to free it when parameter setup returns an error. Since beacon templates must be released during normal execution, they must also be released in the error handling paths to prevent memory leaks. Fix this by using unified exit paths with proper cleanup in the respective error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53114

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler Calling perf_allow_kernel() from the NMI context is unsafe and could be fatal. Capture the permission at event-initialization time by storing it in event->hw.flags, and have the NMI handler rely on that cached flag instead of making the call directly.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53115

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53116

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: s390/ap: use generic driver_override infrastructure When the AP masks are updated via apmask_store() or aqmask_store(), ap_bus_revise_bindings() is called after ap_attr_mutex has been released. This calls __ap_revise_reserved(), which accesses the driver_override field without holding any lock, racing against a concurrent driver_override_store() that may free the old string, resulting in a potential UAF. Fix this by using the driver-core driver_override infrastructure, which protects all accesses with an internal spinlock. Note that unlike most other buses, the AP bus does not check driver_override in its match() callback; the override is checked in ap_device_probe() and __ap_revise_reserved() instead. Also note that we do not enable the driver_override feature of struct bus_type, as AP - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n". Additionally, AP has a custom counter that is modified in the corresponding custom driver_override_store().

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53117

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: s390/cio: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53118

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: vdpa: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53119

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: platform/wmi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53120

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: PCI: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53121

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: amd-pstate: Fix memory leak in amd_pstate_epp_cpu_init() On failure to set the epp, the function amd_pstate_epp_cpu_init() returns with an error code without freeing the cpudata object that was allocated at the beginning of the function. Ensure that the cpudata object is freed before returning from the function. This memory leak was discovered by Claude Opus 4.6 with the aid of Chris Mason's AI review-prompts (https://github.com/masoncl/review-prompts/tree/main/kernel).

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53122

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between reflink and transaction commit when using flushoncommit When using the flushoncommit mount option, we can have a deadlock between a transaction commit and a reflink operation that copied an inline extent to an offset beyond the current i_size of the destination node. The deadlock happens like this: 1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page(); 2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc; 3) The delalloc flushing sees the new dirty folio of inode Y and when it attempts to flush it, it ends up at extent_writepage() and sees that the offset of the folio is beyond the i_size of inode Y, so it attempts to invalidate the folio by calling folio_invalidate(), which ends up at btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it tries to lock the folio's range in inode Y's extent io tree, but it blocks since it's currently locked by task A - during a reflink we lock the inodes and the source and destination ranges after flushing all delalloc and waiting for ordered extent completion - after that we don't expect to have dirty folios in the ranges, the exception is if we have to copy an inline extent's data (because the destination offset is not zero); 4) Task A then attempts to start a transaction to update the inode item, and then it's blocked since the current transaction is in the TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the current transaction to become unblocked (its state >= TRANS_STATE_UNBLOCKED). So task A is waiting for the transaction commit done by task B, and the later waiting on the extent lock of inode Y that is currently held by task A. Syzbot recently reported this with the following stack traces: INFO: task kworker/u8:7:1053 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-46) Call Trace: context_switch kernel/sched/core.c:5298 [inline] schedule+0x1553/0x5240 kernel/sched/core.c:6911 schedule_loop kernel/sched/core.c:6993 [inline] schedule+0x164/0x360 kernel/sched/core.c:7008 wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704 extent_writepage fs/btrfs/extent_io.c:1852 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline] btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713 do_writepages+0x32e/0x550 mm/page-writeback.c:2554 __writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750 writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042 wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227 wb_do_writeback fs/fs-writeback.c:2374 [inline] wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414 process_one_work kernel/workqueue.c:3276 [inline] process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 INFO: task syz.4.64:6910 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.64 state:D stack:22752 pid:6910 tgid: ---truncated---

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53123

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md: wake raid456 reshape waiters before suspend During raid456 reshape, direct IO across the reshape position can sleep in raid5_make_request() waiting for reshape progress while still holding an active_io reference. If userspace then freezes reshape and writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io and waits for all in-flight IO to drain. This can deadlock: the IO needs reshape progress to continue, but the reshape thread is already frozen, so the active_io reference is never dropped and suspend never completes. raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do the same for normal md suspend when reshape is already interrupted, so waiting raid456 IO can abort, drop its reference, and let suspend finish. The mdadm test tests/25raid456-reshape-deadlock reproduces the hang.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53124

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ublk: reset per-IO canceled flag on each fetch If a ublk server starts recovering devices but dies before issuing fetch commands for all IOs, cancellation of the fetch commands that were successfully issued may never complete. This is because the per-IO canceled flag can remain set even after the fetch for that IO has been submitted - the per-IO canceled flags for all IOs in a queue are reset together only once all IOs for that queue have been fetched. So if a nonempty proper subset of the IOs for a queue are fetched when the ublk server dies, the IOs in that subset will never successfully be canceled, as their canceled flags remain set, and this prevents ublk_cancel_cmd from actually calling io_uring_cmd_done on the commands, despite the fact that they are outstanding. Fix this by resetting the per-IO cancel flags immediately when each IO is fetched instead of waiting for all IOs for the queue (which may never happen).

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53125

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md: fix array_state=clear sysfs deadlock When "clear" is written to array_state, md_attr_store() breaks sysfs active protection so the array can delete itself from its own sysfs store method. However, md_attr_store() currently drops the mddev reference before calling sysfs_unbreak_active_protection(). Once do_md_stop(..., 0) has made the mddev eligible for delayed deletion, the temporary kobject reference taken by sysfs_break_active_protection() can become the last kobject reference protecting the md kobject. That allows sysfs_unbreak_active_protection() to drop the last kobject reference from the current sysfs writer context. kobject teardown then recurses into kernfs removal while the current sysfs node is still being unwound, and lockdep reports recursive locking on kn->active with kernfs_drain() in the call chain. Reproducer on an existing level: 1. Create an md0 linear array and activate it: mknod /dev/md0 b 9 0 echo none > /sys/block/md0/md/metadata_version echo linear > /sys/block/md0/md/level echo 1 > /sys/block/md0/md/raid_disks echo "$(cat /sys/class/block/sdb/dev)" > /sys/block/md0/md/new_dev echo "$(($(cat /sys/class/block/sdb/size) / 2))" > \ /sys/block/md0/md/dev-sdb/size echo 0 > /sys/block/md0/md/dev-sdb/slot echo active > /sys/block/md0/md/array_state 2. Wait briefly for the array to settle, then clear it: sleep 2 echo clear > /sys/block/md0/md/array_state The warning looks like: WARNING: possible recursive locking detected bash/588 is trying to acquire lock: (kn->active#65) at __kernfs_remove+0x157/0x1d0 but task is already holding lock: (kn->active#65) at sysfs_unbreak_active_protection+0x1f/0x40 ... Call Trace: kernfs_drain __kernfs_remove kernfs_remove_by_name_ns sysfs_remove_group sysfs_remove_groups __kobject_del kobject_put md_attr_store kernfs_fop_write_iter vfs_write ksys_write Restore active protection before mddev_put() so the extra sysfs kobject reference is dropped while the mddev is still held alive. The actual md kobject deletion is then deferred until after the sysfs write path has fully returned.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53126

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix disk reference leak in blkcg_maybe_throttle_current() Add the missing put_disk() on the error path in blkcg_maybe_throttle_current(). When blkcg lookup, blkg lookup, or blkg_tryget() fails, the function jumps to the out label which only calls rcu_read_unlock() but does not release the disk reference acquired by blkcg_schedule_throttle() via get_device(). Since current->throttle_disk is already set to NULL before the lookup, blkcg_exit() cannot release this reference either, causing the disk to never be freed. Restore the reference release that was present as blk_put_queue() in the original code but was inadvertently dropped during the conversion from request_queue to gendisk.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53127

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: block: fix zones_cond memory leak on zone revalidation error paths When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources() has allocated args.zones_cond, the memory is leaked because no error path frees it.

Published: 2026-06-24Modified: 2026-07-23

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53128

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drbd: Balance RCU calls in drbd_adm_dump_devices() Make drbd_adm_dump_devices() call rcu_read_lock() before rcu_read_unlock() is called. This has been detected by the Clang thread-safety analyzer.

Published: 2026-06-24Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53129

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down.

Published: 2026-06-24Modified: 2026-07-06

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53130

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE), but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440). Later, omfs_make_empty() uses sbi->s_sys_blocksize - OMFS_DIR_START as the length argument to memset(). Since s_sys_blocksize is u32, a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes an unsigned underflow there, wrapping to a value near 2^32. That drives a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel memory far beyond the backing block buffer. Add the corresponding lower-bound check alongside the existing upper-bound check in omfs_fill_super(), so that malformed images are rejected during superblock validation before any filesystem data is processed.

Published: 2026-06-24Modified: 2026-07-06

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

References

CVE-2026-53278

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Check whether the config array is allocated before destroying it __destroy_component_cfg() is called to free the configuration array. It uses the embedded 'garbage' structure, which means the array has to be allocated. If __destroy_component_cfg() is called from mpam_disable() before the configuration was ever allocated, then a NULL pointer is dereferenced. Check for this case and return early if the configuration is not allocated. __destroy_component_cfg() also frees the mbwu_state as this is allocated by __allocate_component_cfg(). As the mbwu_state is allocated after comp->cfg is set, and is also under mpam_list_lock, only the first pointer needs checking.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53279

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/gma500/oaktrail_lvds: fix hang on init failure The LVDS init code looks up an I2C adapter using i2c_get_adapter() and tries to read the EDID before falling back to allocating and registering its own adapter. The error handling does not separate these cases so on a late init failure it will try to deregister and free also an adapter that had previously been registered. Since i2c_get_adapter() takes another reference to the adapter, deregistration hangs indefinitely while waiting for the reference to be released. Fix this by only destroying adapters allocated during LVDS init on errors.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53280

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done() Local sashiko review pointed it out that group->domain could be NULL when a default domain fails to allocate during the first probe, which can crash at domain->ops->attach_dev dereference in __iommu_attach_device() invoked by pci_dev_reset_iommu_done(). pci_dev_reset_iommu_prepare() is fine as an old_domain pointer can be NULL. Skip the re-attach in pci_dev_reset_iommu_done() to fix the bug.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53281

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid NULL pointer dereference or refcount corruption Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE") fixed a NULL pointer dereference in an unlikely situation partly. If dev_pasid is not found in the dev_pasids list, it remains NULL. However, the teardown operations are executed unconditionally, this lead to a NULL pointer dereference or refcount corruption. If the domain was never attached to this IOMMU, info will be NULL, which would cause an immediate dereference when checking --info->refcnt. Even if info is not NULL, decrementing the refcount without having removed a valid PASID might unbalance the count. This could lead to premature dropping of the refcount to 0, potentially causing a use-after-free for the remaining active devices sharing the domain. Fix it by returning early if dev_pasid is NULL, before executing the teardown operations. Issue found by AI review and suggested by Kevin Tian. https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com

Published: 2026-06-26Modified: 2026-07-29

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-53282

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Push kjump return address even for non-kjump kexec The version of purgatory code shipped by kexec-tools attempts to look above the top of its stack to find a return address for a kjump, even in a non-kjump kexec. After the commit in Fixes: the word above the stack might not be there, leading to a fault (which is at least now caught by my exception-handling code in kexec). That commit fixed things for the actual kjump path, but no longer "gratuitously" pushes the unused return address to the stack in the non-kjump path. Put that back in the non-kjump path, to prevent purgatory from crashing when trying to access it.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53283

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bounds-check devid in __rlookup_amd_iommu() iommu_device_register() walks every device on the PCI bus via bus_for_each_dev() and calls amd_iommu_probe_device() for each. The inlined check_device() path computes the device's sbdf, calls rlookup_amd_iommu() to find the owning IOMMU, and only afterwards verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes rlookup_table[devid] with no bounds check of its own, so for a PCI device whose BDF is not described by the IVRS, the lookup reads past the end of the allocation before the caller's bounds check can run. This was harmless before commit e874c666b15b ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()"): the table was a zeroed page-order allocation, so the over-read returned NULL and the caller's NULL check skipped the device. After that commit the table is a tight kvcalloc() and the over-read returns adjacent slab contents, which check_device() then dereferences as a struct amd_iommu *, causing a boot-time GPF. Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at 00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation, into the adjacent kmalloc-512 slab object: pci 0000:00:04.0: Adding to iommu group 0 pci 0000:00:05.0: Adding to iommu group 1 pci 0000:00:06.0: Adding to iommu group 2 pci 0000:00:07.0: Adding to iommu group 3 Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025 RIP: 0010:amd_iommu_probe_device+0x54/0x3a0 Call Trace: __iommu_probe_device+0x107/0x520 probe_iommu_group+0x29/0x50 bus_for_each_dev+0x7e/0xe0 iommu_device_register+0xc9/0x240 iommu_go_to_state+0x9c0/0x1c60 amd_iommu_init+0x14/0x40 pci_iommu_init+0x16/0x60 do_one_initcall+0x47/0x2f0 Guard the array access in __rlookup_amd_iommu(). With the fix applied on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53284

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: only release the dirty pages io tree after successful writes [WARNING] With extra warning on dirty extent buffers at umount (aka, the next patch in the series), test case generic/388 can trigger the following warning about dirty extent buffers at unmount time: BTRFS critical (device dm-2 state E): emergency shutdown BTRFS error (device dm-2 state E): error while writing out transaction: -30 BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction. BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30) BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem BTRFS info (device dm-2 state EA): forced readonly BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c ------------[ cut here ]------------ WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368 CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs] Call Trace: close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] generic_shutdown_super+0x89/0x1a0 kill_anon_super+0x16/0x40 btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] deactivate_locked_super+0x2d/0xb0 cleanup_mnt+0xdc/0x140 task_work_run+0x5a/0xa0 exit_to_user_mode_loop+0x123/0x4b0 do_syscall_64+0x243/0x7c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ---[ end trace 0000000000000000 ]--- BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7 I'm using a stripped down version, which seems to trigger the warning more reliably: _fsstress_pid="" workload() { dmesg -C mkfs.btrfs -f -K $dev > /dev/null echo 1 > /sys/kernel/debug/clear_warn_once mount $dev $mnt $fsstress -w -n 1024 -p 4 -d $mnt & _fsstress_pid=$! sleep 0 $godown $mnt pkill --echo -PIPE fsstress > /dev/null wait $_fsstress_pid unset _fsstress_pid umount $mnt if dmesg | grep -q "WARNING"; then fail fi } for (( i = 0; i < $runtime; i++ )); do echo "=== $i/$runtime ===" workload done [CAUSE] Inside btrfs_write_and_wait_transaction(), we first try to write all dirty ebs, then wait for them to finish. After that we call btrfs_extent_io_tree_release() to free all extent states from dirty_pages io tree. However if we hit an error from btrfs_write_marked_extent(), then we still call btrfs_extent_io_tree_release() to clear that dirty_pages io tree, which may contain dirty records that we haven't yet submitted. Furthermore, the later transaction cleanup path will utilize that dirty_pages io tree to properly cleanup those dirty ebs, but since it's already empty, no dirty ebs are properly cleaned up, thus will later trigger the warnings inside invalidate_btree_folios(). ---truncated---

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53285

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED [Why] dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(), which disables local softirqs. The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path, which calls BUG_ON(in_interrupt()) because it's invoked within the FPU-enabled (softirq disabled) region, leading to a kernel crash. [How] Wrap the dc_state_create_phantom_plane() call with the DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during this memory allocation. (cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11)

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53286

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: idpf: fix double free and use-after-free in aux device error paths When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or idpf_plug_core_aux_dev(), the err_aux_dev_add label calls auxiliary_device_uninit() and falls through to err_aux_dev_init. The uninit call will trigger put_device(), which invokes the release callback (idpf_vport_adev_release / idpf_core_adev_release) that frees iadev. The fall-through then reads adev->id from the freed iadev for ida_free() and double-frees iadev with kfree(). Free the IDA slot and clear the back-pointer before uninit, while adev is still valid, then return immediately. Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization") fixed the same use-after-free in the matching unplug path in this file but missed both probe error paths.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53287

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: audit: fix incorrect inheritable capability in CAPSET records __audit_log_capset() records the effective capability set into the inheritable field due to a copy-paste error. Every CAPSET audit record therefore reports cap_pi (process inheritable) with the value of cap_effective instead of cap_inheritable. This silently corrupts audit data used for compliance and forensic analysis: an attacker who modifies inheritable capabilities to prepare for a privilege-escalating exec would have the change masked in the audit trail. The bug has been present since the original introduction of CAPSET audit records in 2008.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53288

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64: Reserve an extra page for early kernel mapping The final part of [data, end) segment may overflow into the next page of init_pg_end[1] which is the gap page before early_init_stack[2]: [1] crash_arm64_v9.0.1> vtop ffffffed00601000 VIRTUAL PHYSICAL ffffffed00601000 83401000 PAGE DIRECTORY: ffffffecffd62000 PGD: ffffffecffd62da0 => 10000000833fb003 PMD: ffffff80033fb018 => 10000000833fe003 PTE: ffffff80033fe008 => 68000083401f03 PAGE: 83401000 PTE PHYSICAL FLAGS 68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN) PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffffffec00d0040 83401000 0 0 1 4000 reserved [2] ffffffed002c8000 (r) pidata ffffffed0054e000 (d) pi_bss_start ffffffed005f5000 (b) __pi_init_pg_dir ffffffed005fe000 (b) __pi_init_pg_end ffffffed005ff000 (B) early_init_stack ffffffed00608000 (b) piend For 4K pages, the early kernel mapping may use 2MB block entries but the kernel segments are only 64KB aligned. Segment boundaries that fall within a 2MB block therefore require a PTE table so that different attributes can be applied on either side of the boundary. KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel VMAs registered by declare_kernel_vmas(). However, since commit 5973a62efa34 ("arm64: map [_text, _stext) virtual address range non-executable+read-only"), the early mapper also maps [_text, _stext) separately from [_stext, _etext). This adds one more early-only split and can require one more page-table page than the existing EARLY_SEGMENT_EXTRA_PAGES allowance reserves. Increase the 4K-page early mapping allowance by one page to cover that additional split. [catalin.marinas@arm.com: rewrote part of the commit log] [catalin.marinas@arm.com: expanded the code comment]

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53289

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_reset_all_vfs() ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi(). When the VSI rebuild fails (e.g. during NVM firmware update via nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path, leaving txq_map and rxq_map as NULL. The subsequent unconditional call to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0]. The single-VF reset path in ice_reset_vf() already handles this correctly by checking the return value of ice_vf_reconfig_vsi() and skipping ice_vf_post_vsi_rebuild() on failure. Apply the same pattern to ice_reset_all_vfs(): check the return value of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and ice_eswitch_attach_vf() on failure. The VF is left safely disabled (ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can be recovered via a VFLR triggered by a PCI reset of the VF (sysfs reset or driver rebind). Note that this patch does not prevent the VF VSI rebuild from failing during NVM update — the underlying cause is firmware being in a transitional state while the EMP reset is processed, which can cause Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This patch only prevents the subsequent NULL pointer dereference that crashes the kernel when the rebuild does fail. crash> bt PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5" #0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee #1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba #2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540 #3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda #4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997 #5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595 #6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2 [exception RIP: ice_ena_vf_q_mappings+0x79] RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206 RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000 RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040 R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000 R13: 0000000000000010 R14: R15: ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice] #8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice] #9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice] #10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4 #11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de #12 [ff72159bcfe5bf18] kthread at ffffffffaa946663 #13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9 The panic occurs attempting to dereference the NULL pointer in RDX at ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi). The faulting VSI is an allocated slab object but not fully initialized after a failed ice_vsi_rebuild(): crash> struct ice_vsi 0xff34c9efc27d4828 netdev = 0x0, rx_rings = 0x0, tx_rings = 0x0, q_vectors = 0x0, txq_map = 0x0, rxq_map = 0x0, alloc_txq = 0x10, num_txq = 0x10, alloc_rxq = 0x10, num_rxq = 0x10, The nvmupdate64e process was performing NVM firmware update: crash> bt 0xff34c9edd1a30000 PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e" #0 [ff72159bcd617618] __schedule at ffffffffab5333f8 #4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice] #5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice] #6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice] #7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice] #8 ---truncated---

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53290

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/xe/eustall: Fix drm_dev_put called before stream disable in close In xe_eu_stall_stream_close(), drm_dev_put() is called before the stream is disabled and its resources are freed. If this drops the last reference, the device structures could be freed while the subsequent cleanup code still accesses them, leading to a use-after-free. Fix this by moving drm_dev_put() after all device accesses are complete. This matches the ordering in xe_oa_release(). (cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c)

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53291

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/conexant: Fix missing error check for jack detection In cx_probe(), the return value of snd_hda_jack_detect_enable_callback() is ignored. This function returns a pointer, and if it fails (e.g., due to memory allocation failure), it returns an error pointer which must be checked using IS_ERR(). If the registration fails, the driver continues to probe, but the jack detection callback will not be registered. This can lead to a kernel crash later when the driver attempts to handle jack events or accesses the uninitialized structure. Check the return value using IS_ERR() and propagate the error via PTR_ERR() to the probe caller.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53292

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via pn_socket_autobind(): kernel BUG at net/phonet/socket.c:213! RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline] RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421 Call Trace: sock_sendmsg_nosec+0x112/0x150 net/socket.c:797 __sock_sendmsg net/socket.c:812 [inline] __sys_sendto+0x402/0x590 net/socket.c:2280 ... pn_socket_autobind() calls pn_socket_bind() with port 0 and, on -EINVAL, assumes the socket was already bound and asserts that the port is non-zero: err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn)); if (err != -EINVAL) return err; BUG_ON(!pn_port(pn_sk(sock->sk)->sobject)); return 0; /* socket was already bound */ However pn_socket_bind() also returns -EINVAL when sk->sk_state is not TCP_CLOSE, even when the socket has never been bound and pn_port() is still 0. In that case the BUG_ON() fires and panics the kernel from a user-triggerable path. Treat the "bind returned -EINVAL but pn_port() is still 0" case as a regular error and propagate -EINVAL to the caller instead of crashing. Existing callers already translate a non-zero return from pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here only changes behaviour from panic to a normal errno.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53293

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG There were multiple issues in that code. First of all the order between the reset semaphore and the mm_lock was wrong (e.g. copy_to_user) was called while holding the lock. Then we allocated memory while holding the reset semaphore which is also a pretty big bug and can deadlock. Then we used down_read_trylock() instead of waiting for the reset to finish. (cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e)

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53294

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: don't free the reused channel The RX channel can be aliased to the TX channel if it has a different MMIO. This special case needs to be handled when freeing the channels otherwise a double-free occurs.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53295

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mailbox: add sanity check for channel array Fail gracefully if there is no channel array attached to the mailbox controller. Otherwise the later dereference will cause an OOPS which might not be seen because mailbox controllers might instantiate very early. Remove the comment explaining the obvious while here.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53296

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: free channels on probe error On probe error, free the previously obtained channels. This not only prevents a leak, but also UAF scenarios because the client structure will be removed nonetheless because it was allocated with devm.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53297

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: mana: Guard mana_remove against double invocation If PM resume fails (e.g., mana_attach() returns an error), mana_probe() calls mana_remove(), which tears down the device and sets gd->gdma_context = NULL and gd->driver_data = NULL. However, a failed resume callback does not automatically unbind the driver. When the device is eventually unbound, mana_remove() is invoked a second time. Without a NULL check, it dereferences gc->dev with gc == NULL, causing a kernel panic. Add an early return if gdma_context or driver_data is NULL so the second invocation is harmless. Move the dev = gc->dev assignment after the guard so it cannot dereference NULL.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53298

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_rx_queue() If queue entry or DMA descriptor list allocation fails in airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a NULL pointer dereference running netif_napi_del() for RX queue NAPIs since netif_napi_add() has never been executed to this particular RX NAPI. The issue is due to the early ndesc initialization in airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc value to check if the queue is properly initialized. Fix the issue moving ndesc initialization at end of airoha_qdma_init_tx routine. Move page_pool allocation after descriptor list allocation in order to avoid memory leaks if desc allocation fails.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53299

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_tx() If queue entry list allocation fails in airoha_qdma_init_tx_queue routine, airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference accessing the queue entry array. The issue is due to the early ndesc initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc initialization at end of airoha_qdma_init_tx routine.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53300

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix NTMP DMA use-after-free issue The AI-generated review reported a potential DMA use-after-free issue [1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending command is not explicitly aborted, while ntmp_free_data_mem() unconditionally frees the DMA buffer. If the buffer has already been reallocated elsewhere, this may lead to silent memory corruption. Because the hardware eventually processes the pending command and perform a DMA write of the response to the physical address of the freed buffer. To resolve this issue, this patch does the following modifications: 1. Convert cbdr->ring_lock from a spinlock to a mutex The lock was originally a spinlock in case NTMP operations might be invoked from atomic context. After downstream support for all NTMP tables, no such usage has materialized. A mutex lock is now required because the driver now needs to reclaim used BDs and release associated DMA memory within the lock's context, while dma_free_coherent() might sleep. 2. Introduce software command BD (struct netc_swcbd) The hardware write-back overwrites the addr and len fields of the BD, so the driver cannot rely on the hardware BD to free the associated DMA memory. The driver now maintains a software shadow BD storing the DMA buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only reclaims older BDs when the number of used BDs reaches NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no longer needed and are removed. 3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd() netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes consuming the response. At this point, if a concurrent thread submits a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer while it is still in use. Move ring_lock ownership to the caller to ensure the response buffer cannot be reclaimed prematurely. So the helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added. These changes eliminate the DMA use-after-free condition and ensure safe and consistent BD reclamation and DMA buffer lifecycle management.

Published: 2026-06-26Modified: 2026-07-08

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53301

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: reset: amlogic: t7: Fix null reset ops Fix missing reset ops causing kernel null pointer dereference. This SOC's reset is currently not used yet.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53302

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: eip93 - fix hmac setkey algo selection eip93_hmac_setkey() allocates a temporary ahash transform for computing HMAC ipad/opad key material. The allocation uses the driver-specific cra_driver_name (e.g. "sha256-eip93") but passes CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms. Since the EIP93 hash algorithms are the only ones registered under those driver names and they are inherently async, the lookup is self-contradictory and always fails with -ENOENT. When called from the AEAD setkey path, this failure leaves the SA record partially initialized with zeroed digest fields. A subsequent crypto operation then dereferences a NULL pointer in the request context, resulting in a kernel panic: ``` pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93] lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93] sp : ffffffc082feb820 x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000 x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980 x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0 x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000 x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009 x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0 Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740) ``` The reported symbol eip93_aead_handle_result+0xc8c is a resolution artifact from static functions being merged under the nearest exported symbol. Decoding the faulting sequence: ``` 910142b6 ADD X22, X21, #0x50 f94012e0 LDR X0, [X23, #0x20] f9002aa0 STR X0, [X21, #0x50] f90006d3 STR X19, [X22, #0x8] f9400740 LDR X0, [X26, #0x8] ``` The faulting LDR at [X26, #0x8] is loading ctx->flags (offset 8 in eip93_hash_ctx), where ctx has been resolved to NULL from a partially initialized or unreachable transform context following the failed setkey. Fix this by dropping the CRYPTO_ALG_ASYNC mask from the crypto_alloc_ahash() call. The code already handles async completion correctly via crypto_wait_req(), so there is no requirement to restrict the lookup to synchronous algorithms. Note that hashing a single 64-byte block through the hardware is likely slower than doing it in software due to the DMA round-trip overhead, but offloading it may still spare CPU cycles on the slower embedded cores where this IP is found. [Detailed investigation report of this bug]

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53303

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show() In f2fs_sbi_show(), the extension_list, extension_count and hot_ext_count are read without holding sbi->sb_lock. If a concurrent sysfs store modifies the extension list via f2fs_update_extension_list(), the show path may read inconsistent count and array contents, potentially leading to out-of-bounds access or displaying stale data. Fix this by holding sb_lock around the entire extension list read and format operation.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-53304

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version 1.16.1-2.fc37 dated 04/01/2014 ... Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7e The fix is to use module_param_cb to validate and reject invalid values assigned to def_reserved_size.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53305

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ps883x: Fix Oops at unbind When trying to unbind a device in order to bind to it vfio-platform as: echo bc0000.geniqup > /sys/bus/platform/devices/bc0000.geniqup/driver/unbind I get the following Oops: [ 436.478639] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 436.487762] Mem abort info: [ 436.490716] ESR = 0x0000000096000004 [ 436.494595] EC = 0x25: DABT (current EL), IL = 32 bits [ 436.500071] SET = 0, FnV = 0 [ 436.503250] EA = 0, S1PTW = 0 [ 436.506505] FSC = 0x04: level 0 translation fault [ 436.511533] Data abort info: [ 436.514558] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 436.520215] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 436.525436] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 436.530918] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008861a9000 [ 436.537554] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 [ 436.544548] Internal error: Oops: 0000000096000004 [#1] SMP [ 436.550374] Modules linked in: [ 436.553542] CPU: 2 UID: 0 PID: 671 Comm: bash Tainted: G W 7.0.0-rc3-g56fcdd0911a5-dirty #2 PREEMPT [ 436.564440] Tainted: [W]=WARN [ 436.567515] Hardware name: LENOVO 91B6CTO1WW/3796, BIOS O6NKT3BA 05/02/2025 [ 436.574675] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 436.581841] pc : ps883x_retimer_remove+0x14/0x94 [ 436.586605] lr : i2c_device_remove+0x28/0x84 [ 436.591017] sp : ffff8000847137c0 That's because the ps883x_retimer_remove() retrieves the driver data from i2c_get_clientdata() which was never set at probe. So, add i2c_set_clientdata() at the end of the probe.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53306

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tty: hvc_iucv: fix off-by-one in number of supported devices MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8. This is the number of entries in: static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; Sometimes hvc_iucv_table[] is limited by: (a) if (num > hvc_iucv_devices) // for error detection or (b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places (so these 2 don't agree; second one appears to be correct to me.) hvc_iucv_devices can be 0..8. This is a counter. (c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8]. Oops.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53307

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pinctrl: pinconf-generic: Fully validate 'pinmux' property The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property is not empty when present. This might be not true. With that, the allocator will give a special value in return and not NULL which lead to the crash when trying to access that (invalid) memory. Fix that by fully validating 'pinmux' value, including its length.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53308

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: power: supply: max77705: Free allocated workqueue and fix removal order Use devm interface for allocating workqueue to fix two bugs at the same time: 1. Driver leaks the memory on remove(), because the workqueue is not destroyed. 2. Driver allocates workqueue and then registers interrupt handlers with devm interface. This means that probe error paths will not use a reversed order, but first destroy the workqueue and then, via devm release handlers, free the interrupt. The interrupt handler schedules work on this exact workqueue, thus if interrupt is hit in this short time window - after destroying workqueue, but before devm() frees the interrupt - the schedulled work will lead to use of freed memory. Change is not equivalent in the workqueue itself: use non-legacy API which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is used to update power supply (power_supply_changed()) status, thus there is no point to run it for memory reclaim. Note that dev_name() is not directly used in second argument to prevent possible unlikely parsing any "%" character in device name as format.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53309

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison The local-vs-remote region comparison loop uses '<=' instead of '<', causing it to read one entry past the valid range of qr_regions. The other loops in the same function correctly use '<'. Fix the loop condition to use '<' for consistency and correctness.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-53310

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix cross-fabric target timeout lookup When a fabric receives an error interrupt, the error may have occurred on a different fabric. The target timeout lookup was using the wrong base address (cbb->regs) with offsets from a different fabric's target map, causing a kernel page fault. Unable to handle kernel paging request at virtual address ffff80000954cc00 pc : tegra234_cbb_get_tmo_slv+0xc/0x28 Call trace: tegra234_cbb_get_tmo_slv+0xc/0x28 print_err_notifier+0x6c0/0x7d0 tegra234_cbb_isr+0xe4/0x1b4 Add tegra234_cbb_get_fabric() to look up the correct fabric device using fab_id, and use its base address for accessing target timeout registers.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53311

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fuse: fix uninit-value in fuse_dentry_revalidate() fuse_dentry_revalidate() may be called with a dentry that didn't had ->d_time initialised. The issue was found with KMSAN, where lookup_open() calls __d_alloc(), followed by d_revalidate(), as shown below: ===================================================== BUG: KMSAN: uninit-value in fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394 fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394 d_revalidate fs/namei.c:1030 [inline] lookup_open fs/namei.c:4405 [inline] open_last_lookups fs/namei.c:4583 [inline] path_openat+0x1614/0x64c0 fs/namei.c:4827 do_file_open+0x2aa/0x680 fs/namei.c:4859 [...] Uninit was created at: slab_post_alloc_hook mm/slub.c:4466 [inline] slab_alloc_node mm/slub.c:4788 [inline] kmem_cache_alloc_lru_noprof+0x382/0x1280 mm/slub.c:4807 __d_alloc+0x55/0xa00 fs/dcache.c:1740 d_alloc_parallel+0x99/0x2740 fs/dcache.c:2604 lookup_open fs/namei.c:4398 [inline] open_last_lookups fs/namei.c:4583 [inline] path_openat+0x135f/0x64c0 fs/namei.c:4827 do_file_open+0x2aa/0x680 fs/namei.c:4859 [...] =====================================================

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53312

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Remove overflows on the invalidation path Since RISC-V supports a sign extended page table it should support a gather->end of ULONG_MAX, but if this happens it will infinite loop because of the overflow. Also avoid overflow computing the length by moving the +1 to the other side of the <

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53313

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths In dc_dmub_srv_log_diagnostic_data() and dc_dmub_srv_enable_dpia_trace(). Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub) and then call DC_LOG_ERROR() inside that block. DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if dc_dmub_srv is NULL, the logging itself can dereference a NULL pointer and cause a crash. Fix this by splitting the checks. First check if dc_dmub_srv is NULL and return immediately. Then check dc_dmub_srv->dmub and log the error only when dc_dmub_srv is valid. Fixes the below: ../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961) ../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166)

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53314

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: padata: Put CPU offline callback in ONLINE section to allow failure syzbot reported the following warning: DEAD callback error for CPU1 WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614 at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux") which tglx traced to padata_cpu_dead() given it's the only sub-CPUHP_TEARDOWN_CPU callback that returns an error. Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU so move the CPU offline callback to the ONLINE section where failure is possible.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53315

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: Fix NULL deref in ras_core_get_utc_second_timestamp() ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp (in seconds since the Unix epoch) through a platform-specific RAS system callback and is used for timestamping RAS error events. The function checks ras_core in the conditional statement before calling the sys_fn callback. However, when the condition fails, the function prints an error message using ras_core->dev. If ras_core is NULL, this can lead to a potential NULL pointer dereference when accessing ras_core->dev. Add an early NULL check for ras_core at the beginning of the function and return 0 when the pointer is not valid. This prevents the dereference and makes the control flow clearer.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53316

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: Fix NULL deref in ras_core_ras_interrupt_detected() Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev is accessed in the error path. Reported by: Dan Carpenter

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53317

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Place upper limit on station AID Any station configured with an AID over 20 causes a firmware crash. This situation occurred in our testing using an AP interface on 7922 hardware, with a modified hostapd, sourced from Mediatek's OpenWRT feeds. In stock hostapd, station AIDs begin counting at 1, and this configuration is prevented with an upper limit on associated stations. However, the modified hostapd began allocation at 65, which caused the firmware to crash. This fix does not allow these AIDs to work, but will prevent the firmware crash. This crash was only seen on IFTYPE_AP interfaces, and the fix does not appear to have an effect on IFTYPE_STATION behavior.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53318

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_tx_check_aggr() Move the NULL check for 'sta' before dereferencing it to prevent a possible crash.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53319

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default() wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from wbt_alloc() and wbt_init(). However, both are expected failure paths: - wbt_alloc() can return NULL under memory pressure (-ENOMEM) - wbt_init() can fail with -EBUSY if wbt is already registered syzbot triggers this by injecting memory allocation failures during MTD partition creation via ioctl(BLKPG), causing a spurious warning. wbt_init_enable_default() is a best-effort initialization called from blk_register_queue() with a void return type. Failure simply means the disk operates without writeback throttling, which is harmless. Replace WARN_ON_ONCE with plain if-checks, consistent with how wbt_set_lat() in the same file already handles these failures. Add a pr_warn() for the wbt_init() failure to retain diagnostic information without triggering a full stack trace.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53320

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and calling nilfs_bmap_mark() on a non-existent block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering the WARN_ON(ret == -ENOENT). Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the beginning of each iteration. [ryusuke: slightly modified the commit message and comments for accuracy]

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53321

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: io_uring/napi: cap busy_poll_to 10 msec Currently there's no cap on the maximum amount of time that napi is allowed to poll if no events are found, which can lead to kernel complaints on a task being stuck as there's no conditional rescheduling done within that loop. Just cap it to 10 msec in total, that's already way above any kind of sane value that will reap any benefits, yet low enough that it's nowhere near being able to trigger preemption complaints.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53322

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Clean up DMABUFs before disabling function On device shutdown, make vfio_pci_core_close_device() call vfio_pci_dma_buf_cleanup() before the function is disabled via vfio_pci_core_disable(). This ensures that all access via DMABUFs is revoked before the function's BARs become inaccessible. This fixes an issue where, if the function is disabled first, a tiny window exists in which the function's MSE is cleared and yet BARs could still be accessed via the DMABUF. The resources would also be freed and up for grabs by a different driver.

Published: 2026-06-26Modified: 2026-07-14

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

References

CVE-2026-53323

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops DSA replaces the conduit (master) device's ethtool_ops with its own wrappers that aggregate stats from both the conduit and DSA switch ports. Taking the lock again inside the DSA wrappers causes a deadlock. Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y (which looks like some kind of testing device that auto-populates the ports of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero coverage for DSA stuff with real ops locked devs. Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from the DSA conduit ethtool wrappers.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-53324

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: mana: Use pci_name() for debugfs directory naming Use pci_name(pdev) for the per-device debugfs directory instead of hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The previous approach had two issues: 1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs in environments like generic VFIO passthrough or nested KVM, causing a NULL pointer dereference. 2. Multiple PFs would all use "0", and VFs across different PCI domains or buses could share the same slot name, leading to -EEXIST errors from debugfs_create_dir(). pci_name(pdev) returns the unique BDF address, is always valid, and is unique across the system.

Published: 2026-06-26Modified: 2026-07-06

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

Package update kernel-image-7.0 in branch sisyphus

Closed issues (254)

Уязвимость функции skb_try_coalesce() ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии

Уязвимость реализации сетевого протокола RDS ядра операционной системы Linux, позволяющая нарушителю повысить свои привилегии и вызвать отказ в обслуживании

Уязвимость сетевого компонента skbuff ядра операционных систем Linux, позволяющая нарушителю повысить свои привилегии

Уязвимость функции ep_remove() ядра операционных систем Linux, позволяющая нарушителю выполнить произвольный код

Уязвимость компонента drivers/net/ppp/ppp_generic.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: ceph: put folios not suitable for writeback The batch holds references to the folios (see `filemap_get_folios`, `folio_batch_release`), so we need to `folio_put` the folios we remove. Tested on v6.18.

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000.

In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc() Fix inverted condition that skips frequency change trigger, causing kernel panics during cpufreq scaling.

In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup.

In the Linux kernel, the following vulnerability has been resolved: memory: tegra124-emc: Fix dll_change check The code checking whether the specified memory timing enables DLL in the EMRS register was reversed. DLL is enabled if bit A0 is low. Fix the check.

In the Linux kernel, the following vulnerability has been resolved: net/rds: Restrict use of RDS/IB to the initial network namespace Prevent using RDS/IB in network namespaces other than the initial one. The existing RDS/IB code will not work properly in non-initial network namespaces.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL vif dereference in mt7925_mac_write_txwi Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to avoid a potential kernel panic in scenarios where `vif` might not be initialized.

In the Linux kernel, the following vulnerability has been resolved: block: fix zones_cond memory leak on zone revalidation error paths When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources() has allocated args.zones_cond, the memory is leaked because no error path frees it.

In the Linux kernel, the following vulnerability has been resolved: drbd: Balance RCU calls in drbd_adm_dump_devices() Make drbd_adm_dump_devices() call rcu_read_lock() before rcu_read_unlock() is called. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: don't free the reused channel The RX channel can be aliased to the TX channel if it has a different MMIO. This special case needs to be handled when freeing the channels otherwise a double-free occurs.

In the Linux kernel, the following vulnerability has been resolved: reset: amlogic: t7: Fix null reset ops Fix missing reset ops causing kernel null pointer dereference. This SOC's reset is currently not used yet.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: Fix NULL deref in ras_core_ras_interrupt_detected() Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev is accessed in the error path. Reported by: Dan Carpenter

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_tx_check_aggr() Move the NULL check for 'sta' before dereferencing it to prevent a possible crash.