All errata/sisyphus/ALT-PU-2026-7314-7
ALT-PU-2026-7314-7

Package update kernel-image-pine in branch sisyphus

Version6.18.27-alt1
Task#417498
Published2026-06-30
Max severityCRITICAL
Severity:

Closed issues (110)

BDU:2026-08889
HIGH7.8

Уязвимость функции remove waiter() компонента ivpu ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Published: 2026-06-28Modified: 2026-06-29
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
CVE-2026-31786
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Buffer overflow in drivers/xen/sys-hypervisor.c The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786

Published: 2026-04-30Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-31787
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: fix double free via VMA splitting privcmd_vm_ops defines .close (privcmd_close), but neither .may_split nor .open. When userspace does a partial munmap() on a privcmd mapping, the kernel splits the VMA via __split_vma(). Since may_split is NULL, the split is allowed. vm_area_dup() copies vm_private_data (a pages array allocated in alloc_empty_pages()) into the new VMA without any fixup, because there is no .open callback. Both VMAs now point to the same pages array. When the unmapped portion is closed, privcmd_close() calls: - xen_unmap_domain_gfn_range() - xen_free_unpopulated_pages() - kvfree(pages) The surviving VMA still holds the dangling pointer. When it is later destroyed, the same sequence runs again, which leads to a double free. Fix this issue by adding a .may_split callback denying the VMA split. This is XSA-487 / CVE-2026-31787

Published: 2026-04-30Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43491
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the maximum server registration per node Current code does no bound checking on the number of servers added per node. A malicious client can flood NEW_SERVER messages and exhaust memory. Fix this issue by limiting the maximum number of server registrations to 256 per node. If the NEW_SERVER message is received for an old port, then don't restrict it as it will get replaced. While at it, also rate limit the error messages in the failure path of qrtr_ns_worker(). Note that the limit of 256 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased.

Published: 2026-05-19Modified: 2026-06-26
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43493
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix handling of MAY_BACKLOG requests MAY_BACKLOG requests can return EBUSY. Handle them by checking for that value and filtering out EINPROGRESS notifications.

Published: 2026-05-19Modified: 2026-06-26
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43499
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ]

Published: 2026-05-21Modified: 2026-06-26
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43501
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards.

Published: 2026-05-21Modified: 2026-07-02
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45986
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - fix a memory leak in cc_mac_digest() Add cc_unmap_result() if cc_map_hash_request_final() fails to prevent potential memory leak.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45987
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2 After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncs fields written by the CPU from vmcb02 to the cached vmcb12. This is because the cached vmcb12 is used as the authoritative copy of some of the controls, and is the payload when saving/restoring nested state. int_state is also written by the CPU, specifically bit 0 (i.e. SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd to cached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATE preceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadow would be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwrites what KVM_SET_NESTED_STATE restored in int_state). However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, an interrupt shadow would be restored into vmcb01 instead of vmcb02. This would mostly be benign for L1 (delays an interrupt), but not for L2. For L2, the vCPU could hang (e.g. if a wakeup interrupt is delivered before a HLT that should have been in an interrupt shadow). Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02() to avoid this problem. With that, KVM_SET_NESTED_STATE restores the correct interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows it would overwrite it with the same value.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45988
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix re-decryption of RESPONSE packets If a RESPONSE packet gets a temporary failure during processing, it may end up in a partially decrypted state - and then get requeued for a retry. Fix this by just discarding the packet; we will send another CHALLENGE packet and thereby elicit a further response. Similarly, discard an incoming CHALLENGE packet if we get an error whilst generating a RESPONSE; the server will send another CHALLENGE.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45989
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in testdrv_probe() The function testdrv_probe() retrieves the device_node from the PCI device, applies an overlay, and then immediately calls of_node_put(dn). This releases the reference held by the PCI core, potentially freeing the node if the reference count drops to zero. Later, the same freed pointer 'dn' is passed to of_platform_default_populate(), leading to a use-after-free. The reference to pdev->dev.of_node is owned by the device model and should not be released by the driver. Remove the erroneous of_node_put() to prevent premature freeing.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45990
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: slub: fix data loss and overflow in krealloc() Commit 2cd8231796b5 ("mm/slub: allow to set node and align in k[v]realloc") introduced the ability to force a reallocation if the original object does not satisfy new alignment or NUMA node, even when the object is being shrunk. This introduced two bugs in the reallocation fallback path: 1. Data loss during NUMA migration: The jump to 'alloc_new' happens before 'ks' and 'orig_size' are initialized. As a result, the memcpy() in the 'alloc_new' block would copy 0 bytes into the new allocation. 2. Buffer overflow during shrinking: When shrinking an object while forcing a new alignment, 'new_size' is smaller than the old size. However, the memcpy() used the old size ('orig_size ?: ks'), leading to an out-of-bounds write. The same overflow bug exists in the kvrealloc() fallback path, where the old bucket size ksize(p) is copied into the new buffer without being bounded by the new size. A simple reproducer: // e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW while (1) { void *p = kmalloc(128, GFP_KERNEL); p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE); kfree(p); } demonstrates the issue: ================================================================== BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130 Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47): memcpy_orig+0x68/0x130 krealloc_node_align_noprof+0x1c8/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64 allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago): krealloc_node_align_noprof+0x19c/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... ================================================================== Fix it by moving the old size calculation to the top of __do_krealloc() and bounding all copy lengths by the new allocation size.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45993
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Add spectre boundry for syscall dispatch table The LoongArch syscall number is directly controlled by userspace, but does not have a array_index_nospec() boundry to prevent access past the syscall function pointer tables.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45994
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-45996
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix use-after-free on unbind The SPI subsystem frees the controller and any subsystem allocated driver data as part of deregistration (unless the allocation is device managed). Take another reference before deregistering the controller so that the driver data is not freed until the driver is done with it.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45997
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails If device_add(&sdkp->disk_dev) fails, put_device() runs scsi_disk_release(), which frees the scsi_disk but leaves the gendisk referenced. The device_add_disk() error path in sd_probe() calls put_disk(gd); call put_disk(gd) here to mirror that cleanup.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45998
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer.

Published: 2026-05-27Modified: 2026-06-30
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46000
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix conn-level packet handling to unshare RESPONSE packets The security operations that verify the RESPONSE packets decrypt bits of it in place - however, the sk_buff may be shared with a packet sniffer, which would lead to the sniffer seeing an apparently corrupt packet (actually decrypted). Fix this by handing a copy of the packet off to the specific security handler if the packet was cloned.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46001
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data() Fix two bugs in pt5161l_read_block_data(): 1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24], but i2c_smbus_read_block_data() can return up to I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into the caller's buffer before the return value can be checked, so the post-read length validation does not prevent a stack overrun if a device returns more than 24 bytes. Resize the buffer to I2C_SMBUS_BLOCK_MAX. 2. Unexpected positive return on length mismatch: When all three retries are exhausted because the device returns data with an unexpected length, i2c_smbus_read_block_data() returns a positive byte count. The function returns this directly, and callers treat any non-negative return as success, processing stale or incomplete buffer contents. Return -EIO when retries are exhausted with a positive return value, preserving the negative error code on I2C failure.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46002
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext2: reject inodes with zero i_nlink and valid mode in ext2_iget() ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is zero or i_dtime is set, treating them as deleted. However, the case of i_nlink == 0 with a non-zero mode and zero dtime slips through. Since ext2 has no orphan list, such a combination can only result from filesystem corruption - a legitimate inode deletion always sets either i_dtime or clears i_mode before freeing the inode. A crafted image can exploit this gap to present such an inode to the VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via ext2_unlink(), ext2_rename() and ext2_rmdir(): WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295 vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477 do_unlinkat+0x53e/0x730 fs/namei.c:4541 __x64_sys_unlink+0xc6/0x110 fs/namei.c:4587 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1 Call Trace: inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rename+0x35e/0x850 fs/ext2/namei.c:374 vfs_rename+0xf2f/0x2060 fs/namei.c:5021 do_renameat2+0xbe2/0xd50 fs/namei.c:5178 __x64_sys_rename+0x7e/0xa0 fs/namei.c:5223 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311 vfs_rmdir+0x204/0x690 fs/namei.c:4348 do_rmdir+0x372/0x3e0 fs/namei.c:4407 __x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Extend the existing i_nlink == 0 check to also catch this case, reporting the corruption via ext2_error() and returning -EFSCORRUPTED. This rejects the inode at load time and prevents it from reaching any of the namei.c paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46003
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the total number of nodes Currently, the nameserver doesn't limit the number of nodes it handles. This can be an attack vector if a malicious client starts registering random nodes, leading to memory exhaustion. Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46004
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Handle probe errors properly The probe procedure of setup_card() in caiaq driver doesn't treat the error cases gracefully, e.g. the error from snd_card_register() calls snd_card_free() but continues. This would lead to a UAF for the further calls like snd_usb_caiaq_control_init(), as Berk suggested in another patch in the link below. However, the problem is not only that; in general, this function drops the all error handlings (as it's a void function) although its caller can propagate an error to snd_probe(), which eventually calls snd_card_free() as a proper error path. That said, we should treat each error case in setup_card(), and just return the error code promptly, which is then handled later as a fatal error in snd_probe(). This patch achieves it by changing the setup_card() to return an error code. Also, the superfluous snd_card_free() call is removed, too. Note that card->private_free can be set still safely at returning an error. All called functions in card_free() have checks of the unassigned resources or NULL checks.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46005
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfs: fix a resource leak in xfs_alloc_buftarg() In the error path, call fs_put_dax() to drop the DAX device reference.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46006
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix u32 overflow in pushbuf reloc bounds check nouveau_gem_pushbuf_reloc_apply() validates each relocation with if (r->reloc_bo_offset + 4 > nvbo->bo.base.size) but reloc_bo_offset is __u32 (uapi/drm/nouveau_drm.h) and the integer literal 4 promotes to unsigned int, so the addition is performed in 32 bits and wraps before the comparison against the size_t bo size. Cast to u64 so the addition happens in 64-bit arithmetic. [ Add Fixes: tag. - Danilo ]

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46009
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown epf_ntb_epc_destroy() duplicates the teardown that the caller is supposed to do later. This leads to an oops when .allow_link fails or when .drop_link is performed. Remove the helper. Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC group lifetime, and pci_epc_put() in the .drop_link path is sufficient.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46010
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix error handling in rxgk_extract_token() Fix a missing bit of error handling in rxgk_extract_token(): in the event that rxgk_decrypt_skb() returns -ENOMEM, it should just return that rather than continuing on (for anything else, it generates an abort).

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 8.1
CVSS:3.x/CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46011
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: fix use-after-free in release path due to uncancelled work The mtk_jpeg_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->jpeg_work. This creates a race window where the workqueue callback may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release) CPU 1 (workqueue) ---------------- ------------------ close() mtk_jpeg_release() mtk_jpegenc_worker() ctx = work->data // accessing ctx kfree(ctx) // freed! access ctx // UAF! The work is queued via queue_work() during JPEG encode/decode operations (via mtk_jpeg_device_run). If the device is closed while work is pending or running, the work handler will access freed memory. Fix this by calling cancel_work_sync() BEFORE acquiring the mutex. This ordering is critical: if cancel_work_sync() is called after mutex_lock(), and the work handler also tries to acquire the same mutex, it would cause a deadlock. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during ioctl operations.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46012
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46014
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Add missing save/restore handling of LBR MSRs MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So save/restore is completely broken. Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to LBR MSRs from userspace only (as they are read-only MSRs) if LBR virtualization is enabled. Additionally, to correctly restore L1's LBRs while L2 is running, make sure the LBRs are copied from the captured VMCB01 save area in svm_copy_vmrun_state(). Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn't reported as an MSR to save/restore. Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM already handles unsupported reads and writes thanks to commit b5e2fec0ebc3 ("KVM: Ignore DEBUGCTL MSRs with no effect") (kvm_do_msr_access() will morph the unsupported userspace write into a nop). [sean: guard with lbrv checks, massage changelog]

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46015
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: tcp: call sk_data_ready() after listener migration When inet_csk_listen_stop() migrates an established child socket from a closing listener to another socket in the same SO_REUSEPORT group, the target listener gets a new accept-queue entry via inet_csk_reqsk_queue_add(), but that path never notifies the target listener's waiters. A nonblocking accept() still works because it checks the queue directly, but poll()/epoll_wait() waiters and blocking accept() callers can also remain asleep indefinitely. Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration in inet_csk_listen_stop(). However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired in reuseport_migrate_sock() is effectively transferred to nreq->rsk_listener. Another CPU can then dequeue nreq via accept() or listener shutdown, hit reqsk_put(), and drop that listener ref. Since listeners are SOCK_RCU_FREE, wrap the post-queue_add() dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also covers the existing sock_net(nsk) access in that path. The reqsk_timer_handler() path does not need the same changes for two reasons: half-open requests become readable only after the final ACK, where tcp_child_process() already wakes the listener; and once nreq is visible via inet_ehash_insert(), the success path no longer touches nsk directly.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46016
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: remoteproc: xlnx: Only access buffer information if IPI is buffered In the receive callback check if message is NULL to prevent possibility of crash by NULL pointer dereferencing.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46018
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES parse_uac2_sample_rate_range() caps the number of enumerated rates at MAX_NR_RATES, but it only breaks out of the current rate loop. A malformed UAC2 RANGE response with additional triplets continues parsing the remaining triplets and repeatedly prints "invalid uac2 rates" while probe still holds register_mutex. Stop the whole parse once the cap is reached and return the number of rates collected so far.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46019
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanup atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the first page using free_page(), leaking the remaining 3 pages. Use free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46020
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-46021
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone governor cleanup issues If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46022
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-46023
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm mirror: fix integer overflow in create_dirty_log() The argument count calculation in create_dirty_log() performs `*args_used = 2 + param_count` before validating against argc. When a user provides a param_count close to UINT_MAX via the device mapper table string, this unsigned addition wraps around to a small value, causing the subsequent `argc < *args_used` check to be bypassed. The overflowed param_count is then passed as argc to dm_dirty_log_create(), where it can cause out-of-bounds reads on the argv array. Fix by comparing param_count against argc - 2 before performing the addition, following the same pattern used by parse_features() in the same file. Since argc >= 2 is already guaranteed, the subtraction is safe.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46024
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply() If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both protocol and result, this is currently not treated as an error. In case of ac->negotiating == true and ac->protocol > 0, this leads to setting ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for ac->protocol != protocol returns false, and init_protocol() is not called. Subsequently, ac->ops->handle_reply() is called, which leads to a null pointer dereference, because ac->ops is still NULL. This patch changes the check for ac->protocol != protocol to !ac->protocol, as this also includes the case when the protocol was set to zero in the message. This causes the message to be treated as containing a bad auth protocol.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46025
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damon_call() vs kdamond_fn() exit race Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race". damon_call() and damos_walk() can leak memory and/or deadlock when they race with kdamond terminations. Fix those. This patch (of 2); When kdamond_fn() main loop is finished, the function cancels all remaining damon_call() requests and unset the damon_ctx->kdamond so that API callers and API functions themselves can know the context is terminated. damon_call() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damon_call() starts waiting for the kdamond's handling of the newly added request. The damon_call() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damon_call() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damon_call() requests cancelling. Right after that, damon_call() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damon_call() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damon_call() caller threads infinitely waits. Fix this by introducing another damon_ctx field, namely call_controls_obsolete. It is protected by the damon_ctx->call_controls_lock, which protects damon_call() requests registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of remaining damon_call() requests is executed. damon_call() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. Note that the deadlock will not happen when damon_call() is called for repeat mode request. In tis case, damon_call() returns instead of waiting for the handling when the request registration succeeds and it shows the kdamond is running. However, if the request also has dealloc_on_cancel, the request memory would be leaked. The issue is found by sashiko [1].

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46026
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the maximum number of lookups Current code does no bound checking on the number of lookups a client can perform. Though the code restricts the lookups to local clients, there is still a possibility of a malicious local client sending a flood of NEW_LOOKUP messages over the same socket. Fix this issue by limiting the maximum number of lookups to 64 globally. Since the nameserver allows only atmost one local observer, this global lookup count will ensure that the lookups stay within the limit. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46027
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid early lgr access in smc_clc_wait_msg A CLC decline can be received while the handshake is still in an early stage, before the connection has been associated with a link group. The decline handling in smc_clc_wait_msg() updates link-group level sync state for first-contact declines, but that state only exists after link group setup has completed. Guard the link-group update accordingly and keep the per-socket peer diagnosis handling unchanged. This preserves the existing sync_err handling for established link-group contexts and avoids touching link-group state before it is available.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46028
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - snapshot IV for async AEAD requests AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during request processing. For async requests, later socket activity can update that shared state before the original request has fully completed, which can lead to inconsistent IV handling. Snapshot the IV into per-request storage when preparing the AEAD request, so in-flight operations no longer depend on mutable socket state.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46029
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: mm/slab: return NULL early from kmalloc_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, kmalloc_nolock() called from NMI context can re-enter the slab allocator and acquire n->list_lock that the interrupted context is already holding, corrupting slab state. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 get_from_partial_node+0x120/0x4d0 ___slab_alloc+0x8a/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] Fix this by returning NULL early when invoked from NMI on a UP kernel.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46030
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: EDAC/versalnet: Fix device_node leak in mc_probe() of_parse_phandle() returns a device_node reference that must be released with of_node_put(). The original code never freed r5_core_node on any exit path, causing a memory leak. Fix this by using the automatic cleanup attribute __free(device_node) which ensures of_node_put() is called when the variable goes out of scope.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46031
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46033
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize.

Published: 2026-05-27Modified: 2026-06-30
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-46034
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Fix NULL pointer dereference in interrupt trigger path Add validation to ensure MSI is configured before accessing cdx_irqs array in vfio_cdx_set_msi_trigger(). Without this check, userspace can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD. The vfio_cdx_msi_enable() function allocates the cdx_irqs array and sets config_msi to 1 only when called through the EVENTFD path. The trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been done, but there was no enforcement of this call ordering. This matches the protection used in the PCI VFIO driver where vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46035
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, alloc_frozen_pages_nolock() called from NMI context can re-enter rmqueue() and acquire the zone lock that the interrupted context is already holding, corrupting the freelists. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 rmqueue.isra.0+0x2a9/0xa70 get_page_from_freelist+0xeb/0x450 alloc_frozen_pages_nolock_noprof+0x111/0x1e0 allocate_slab+0x42a/0x500 ___slab_alloc+0xa7/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] Fix this by returning NULL early when invoked from NMI on a UP kernel.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46036
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the vdev->cdx_irqs array based on its value, but provides no serialization against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race such that one observes config_msi as set while another clears it and frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free of the cdx_irqs array. Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in vfio_cdx_set_msi_trigger(), which is the single chokepoint through which all updates to config_msi, cdx_irqs, and msi_count flow, covering both the ioctl path and the close-device cleanup path. This keeps the test of config_msi atomic with the subsequent enable, disable, or trigger operations. Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part of this change: the optimization it provided is redundant with the !config_msi early-return inside vfio_cdx_msi_disable(), and leaving the test in place would be an unsynchronized read of state the new lock is meant to protect.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46037
HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: validate reply type before using icmp_pointers Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type. That value is outside the range covered by icmp_pointers[], which only describes the traditional ICMP types up to NR_ICMP_TYPES. Avoid consulting icmp_pointers[] for reply types outside that range, and use array_index_nospec() for the remaining in-range lookup. Normal ICMP replies keep their existing behavior unchanged.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 8.2
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H
References
CVE-2026-46038
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Free the node during ctrl_cmd_bye() A node sends the BYE packet when it is about to go down. So the nameserver should advertise the removal of the node to all remote and local observers and free the node finally. But currently, the nameserver doesn't free the node memory even after processing the BYE packet. This causes the node memory to leak. Hence, remove the node from Xarray list and free the node memory during both success and failure case of ctrl_cmd_bye().

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46039
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: rxgk: Fix potential integer overflow in length check Fix potential integer overflow in rxgk_extract_token() when checking the length of the ticket. Rather than rounding up the value to be tested (which might overflow), round down the size of the available data.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46040
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(), the error path calls inotify_remove_from_idr() but does not call dec_inotify_watches() to undo the preceding inc_inotify_watches(). This leaks a watch count, and repeated failures can exhaust the max_user_watches limit with -ENOSPC even when no watches are active. Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace limits"), the watch count was incremented after fsnotify_add_mark_locked() succeeded, so this path was not affected. The conversion moved inc_inotify_watches() before the mark insertion without adding the corresponding rollback. Add the missing dec_inotify_watches() call in the error path.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46041
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames() hdlc_append() calls usleep_range() to wait for circular buffer space, but it is called with tx_producer_lock (a spinlock) held via hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc. Sleeping while holding a spinlock is illegal and can trigger "BUG: scheduling while atomic". Fix this by moving the buffer-space wait out of hdlc_append() and into hdlc_tx_frames(), before the spinlock is acquired. The new flow: 1. Pre-calculate the worst-case encoded frame length. 2. Wait (with sleep) outside the lock until enough space is available, kicking the TX consumer work to drain the buffer. 3. Acquire the spinlock, re-verify space, and write the entire frame atomically. This ensures that sleeping only happens without any lock held, and that frames are either fully enqueued or not written at all. This bug is found by CodeQL static analysis tool (interprocedural sleep-in-atomic query) and my code review.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46042
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix memory leaks in weighted_interleave_auto_store() weighted_interleave_auto_store() fetches old_wi_state inside the if (!input) block only. This causes two memory leaks: 1. When a user writes "false" and the current mode is already manual, the function returns early without freeing the freshly allocated new_wi_state. 2. When a user writes "true", old_wi_state stays NULL because the fetch is skipped entirely. The old state is then overwritten by rcu_assign_pointer() but never freed, since the cleanup path is gated on old_wi_state being non-NULL. A user can trigger this repeatedly by writing "1" in a loop. Fix both leaks by moving the old_wi_state fetch before the input check, making it unconditional. This also allows a unified early return for both "true" and "false" when the requested mode matches the current mode. Reviewed by: Donet Tom

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46043
CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv rxe_rcv() currently checks only that the incoming packet is at least header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size() underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xCRITICAL 9.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-46044
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46045
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: skip reading rdevs that are not in_sync When reading bitmap pages from member disks, the code iterates through all rdevs and attempts to read from the first available one. However, it only checks for raid_disk assignment and Faulty flag, missing the In_sync flag check. This can cause bitmap data to be read from spare disks that are still being rebuilt and don't have valid bitmap information yet. Reading stale or uninitialized bitmap data from such disks can lead to incorrect dirty bit tracking, potentially causing data corruption during recovery or normal operation. Add the In_sync flag check to ensure bitmap pages are only read from fully synchronized member disks that have valid bitmap data.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46046
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all() The commit c8e008b60492 ("ext4: ignore xattrs past end") introduced a refcount leak in when block_csum is false. ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to get iloc.bh, but never releases it with brelse().

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46047
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Fix use-after-free in driver remove() In the remove callback, if a packet arrives after destroy_workqueue() is called, but before sock_release(), the qrtr_ns_data_ready() callback will try to queue the work, causing use-after-free issue. Fix this issue by saving the default 'sk_data_ready' callback during qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at the start of remove(). This ensures that even if a packet arrives after destroy_workqueue(), the work struct will not be dereferenced. Note that it is also required to ensure that the RX threads are completed before destroying the workqueue, because the threads could be using the qrtr_ns_data_ready() callback.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46048
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix usb_dev refcount leak on probe failure create_card() takes a reference on the USB device with usb_get_dev() and stores the matching usb_put_dev() in card_free(), which is installed as the snd_card's ->private_free destructor. However, ->private_free is only assigned near the end of init_card(), after several failure points (usb_set_interface(), EP type checks, usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its timeout). When any of those fail, init_card() returns an error to snd_probe(), which calls snd_card_free(card). Because ->private_free is still NULL, card_free() never runs, the usb_get_dev() reference is not dropped, and the struct usb_device leaks along with its descriptor allocations and device_private. syzbot reproduces this with a malformed UAC3 device whose only valid altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call fails with -EIO and triggers the leak. Move the ->private_free assignment into create_card(), immediately after usb_get_dev(), so that every error path reaching snd_card_free() balances the reference. card_free()'s callees (snd_usb_caiaq_input_free, free_urbs, kfree) already tolerate the partially-initialized state because the chip private area is zero-initialized by snd_card_new().

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46049
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Add fallback to default RSR for S/PDIF spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR for the MSR calculation loop. However, pll_rate is only updated in atc_pll_init() and not in hw_pll_init(), so it remains 0 after the card init. When spdif_passthru_playback_setup() skips atc_pll_init() for 32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin indefinitely. Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects the hardware state, since hw_card_init() already configures the PLL to the default RSR.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46050
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix deadlock with check operation and nowait requests When an array check is running it will raise the barrier at which point normal requests will become blocked and increment the nr_pending value to signal there is work pending inside of wait_barrier(). NOWAIT requests do not block and so will return immediately with an error, and additionally do not increment nr_pending in wait_barrier(). Upstream change commit 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit this condition. raid_end_bio_io() eventually calls allow_barrier() and it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even though the corresponding increment on nr_pending didn't happen in the NOWAIT case. This can be easily seen by starting a check operation while an application is doing nowait IO on the same array. This results in a deadlocked state due to nr_pending value underflowing and so the md resync thread gets stuck waiting for nr_pending to == 0. Output of r10conf state of the array when we hit this condition: crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0, Example of md_sync thread stuck waiting on raise_barrier() and other requests stuck in wait_barrier(): md1_resync [<0>] raise_barrier+0xce/0x1c0 [<0>] raid10_sync_request+0x1ca/0x1ed0 [<0>] md_do_sync+0x779/0x1110 [<0>] md_thread+0x90/0x160 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 kworker/u1040:2+flush-253:4 [<0>] wait_barrier+0x1de/0x220 [<0>] regular_request_wait+0x30/0x180 [<0>] raid10_make_request+0x261/0x1000 [<0>] md_handle_request+0x13b/0x230 [<0>] __submit_bio+0x107/0x1f0 [<0>] submit_bio_noacct_nocheck+0x16f/0x390 [<0>] ext4_io_submit+0x24/0x40 [<0>] ext4_do_writepages+0x254/0xc80 [<0>] ext4_writepages+0x84/0x120 [<0>] do_writepages+0x7a/0x260 [<0>] __writeback_single_inode+0x3d/0x300 [<0>] writeback_sb_inodes+0x1dd/0x470 [<0>] __writeback_inodes_wb+0x4c/0xe0 [<0>] wb_writeback+0x18b/0x2d0 [<0>] wb_workfn+0x2a1/0x400 [<0>] process_one_work+0x149/0x330 [<0>] worker_thread+0x2d2/0x410 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46051
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe().

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46052
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: ceph: only d_add() negative dentries when they are unhashed Ceph can call d_add(dentry, NULL) on a negative dentry that is already present in the primary dcache hash. In the current VFS that is not safe. d_add() goes through __d_add() to __d_rehash(), which unconditionally reinserts dentry->d_hash into the hlist_bl bucket. If the dentry is already hashed, reinserting the same node can corrupt the bucket, including creating a self-loop. Once that happens, __d_lookup() can spin forever in the hlist_bl walk, typically looping only on the d_name.hash mismatch check and eventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is reachable with reused cached negative dentries. A Ceph lookup or atomic_open can be handed a negative dentry that is already hashed, and fs/ceph/dir.c then hits one of two paths that incorrectly assume "negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL) Both paths can therefore re-add an already-hashed negative dentry. Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn) is true. Fix both fs/ceph/dir.c sites the same way: only call d_add() for a negative dentry when it is actually unhashed. If the negative dentry is already hashed, leave it in place and reuse it as-is. This preserves the existing behavior for unhashed dentries while avoiding d_hash list corruption for reused hashed negatives.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46053
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: rds: fix MR cleanup on copy error __rds_rdma_map() hands sg/pages ownership to the transport after get_mr() succeeds. If copying the generated cookie back to user space fails after that point, the error path must not free those resources again before dropping the MR reference. Remove the duplicate unpin/free from the put_user() failure branch so that MR teardown is handled only through the existing final cleanup path.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46056
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix potential UAF in SSP passkey handlers hci_conn lookup and field access must be covered by hdev lock in hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise the connection can be freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage in both handlers. Keep the existing keypress notification behavior unchanged by routing the early exits through a common unlock path.

Published: 2026-05-27Modified: 2026-06-19
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46057
LOW3.3

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LOG_SUBDOMAINS_OFF inheritance across fork() hook_cred_transfer() only copies the Landlock security blob when the source credential has a domain. This is inconsistent with landlock_restrict_self() which can set LOG_SUBDOMAINS_OFF on a credential without creating a domain (via the ruleset_fd=-1 path): the field is committed but not preserved across fork() because the child's prepare_creds() calls hook_cred_transfer() which skips the copy when domain is NULL. This breaks the documented use case where a process mutes subdomain logs before forking sandboxed children: the children lose the muting and their domains produce unexpected audit records. Fix this by unconditionally copying the Landlock credential blob.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xLOW 3.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N
References
CVE-2026-46058
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: amphion: Fix race between m2m job_abort and device_run Fix kernel panic caused by race condition where v4l2_m2m_ctx_release() frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run with the same context. Race sequence: v4l2_m2m_try_run(): v4l2_m2m_ctx_release(): lock/unlock v4l2_m2m_cancel_job() job_abort() v4l2_m2m_job_finish() kfree(m2m_ctx) <- frees ctx device_run() <- use-after-free crash at 0x538 Crash trace: Unable to handle kernel read from unreadable memory at virtual address 0000000000000538 v4l2_m2m_try_run+0x78/0x138 v4l2_m2m_device_run_work+0x14/0x20 The amphion vpu driver does not rely on the m2m framework's device_run callback to perform encode/decode operations. Fix the race by preventing m2m framework job scheduling entirely: - Add job_ready callback returning 0 (no jobs ready for m2m framework) - Remove job_abort callback to avoid the race condition

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46059
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN For guests with NRIPS disabled, L1 does not provide NextRIP when running an L2 with an injected soft interrupt, instead it advances the current RIP before running it. KVM uses the current RIP as the NextRIP in vmcb02 to emulate a CPU without NRIPS. However, after L2 runs the first time, NextRIP will be updated by the CPU and/or KVM, and the current RIP is no longer the correct value to use in vmcb02. Hence, after save/restore, use the current RIP if and only if a nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the same treatment, as it's the same logic, just for a narrower use case. [sean: give soft_int_next_rip the same treatment]

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46060
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix IRQ cleanup on 6xxx probe failure When adf_dev_up() partially completes and then fails, the IRQ handlers registered during adf_isr_resource_alloc() are not detached before the MSI-X vectors are released. Since the device is enabled with pcim_enable_device(), calling pci_alloc_irq_vectors() internally registers pcim_msi_release() as a devres action. On probe failure, devres runs pcim_msi_release() which calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ handlers (for example 'qat0-bundle0') are still attached. This causes remove_proc_entry() warnings: [ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0' Moving the devm_add_action_or_reset() before adf_dev_up() does not solve the problem since devres runs in LIFO order and pcim_msi_release(), registered later inside adf_dev_up(), would still fire before adf_device_down(). Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to properly free IRQ handlers before devres releases the MSI-X vectors.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46061
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46062
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix integer overflow in run_unpack() volume boundary check The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw addition which can wrap around for large lcn and len values, bypassing the validation. Use check_add_overflow() as is already done for the adjacent prev_lcn + dlcn and vcn64 + len checks added by commit 3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()"). Found by fuzzing with a source-patched harness (LibAFL + QEMU).

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
References
CVE-2026-46063
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/shstk: Prevent deadlock during shstk sigreturn During sigreturn the shadow stack signal frame is popped. The kernel does this by reading the shadow stack using normal read accesses. When it can't assume the memory is shadow stack, it takes extra steps to makes sure it is reading actual shadow stack memory and not other normal readable memory. It does this by holding the mmap read lock while doing the access and checking the flags of the VMA. Unfortunately that is not safe. If the read of the shadow stack sigframe hits a page fault, the fault handler will try to recursively grab another mmap read lock. This normally works ok, but if a writer on another CPU is also waiting, the second read lock could fail and cause a deadlock. Fix this by not holding mmap lock during the read access to userspace. Instead use mmap_lock_speculate_...() to watch for changes between dropping mmap lock and the userspace access. Retry if anything grabbed an mmap write lock in between and could have changed the VMA. These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP kernels. So drop support for the other configs under the assumption that the !SMP shadow stack user base does not exist. Currently there is a check that skips the lookup work when the SSP can be assumed to be on a shadow stack. While reorganizing the function, remove the optimization to make the tricky code flows more common, such that issues like this cannot escape detection for so long.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46064
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix heap over-read in ibmasm_send_i2o_message() The ibmasm_send_i2o_message() function uses get_dot_command_size() to compute the byte count for memcpy_toio(), but this value is derived from user-controlled fields in the dot_command_header (command_size: u8, data_size: u16) and is never validated against the actual allocation size. A root user can write a small buffer with inflated header fields, causing memcpy_toio() to read up to ~65 KB past the end of the allocation into adjacent kernel heap, which is then forwarded to the service processor over MMIO. Silently clamping the copy size is not sufficient: if the header fields claim a larger size than the buffer, the SP receives a dot command whose own header is inconsistent with the I2O message length, which can cause the SP to desynchronize. Reject such commands outright by returning failure. Validate command_size before calling get_mfa_inbound() to avoid leaking an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware frame from the controller's free pool, and returning without a corresponding set_mfa_inbound() call would permanently exhaust it. Additionally, clamp command_size to I2O_COMMAND_SIZE before the memcpy_toio() so the MMIO write stays within the I2O message frame, consistent with the clamping already performed by outgoing_message_size() for the header field.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-46068
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46069
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46070
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: md/raid5: validate payload size before accessing journal metadata r5c_recovery_analyze_meta_block() and r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a journal metadata block using on-disk payload size fields without validating them against the remaining space in the metadata block. A corrupted journal contains payload sizes extending beyond the PAGE_SIZE boundary can cause out-of-bounds reads when accessing payload fields or computing offsets. Add bounds validation for each payload type to ensure the full payload fits within meta_size before processing.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-46071
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12 svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB. However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and clearing clean bits in vmcb12 is not architecturally defined. Move vmcb_mark_dirty() to callers and drop it for vmcb12. This also facilitates incoming refactoring that does not pass the entire VMCB to svm_copy_lbrs().

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46072
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ntfs3: add buffer boundary checks to run_unpack() run_unpack() checks `run_buf < run_last` at the top of the while loop but then reads size_size and offset_size bytes via run_unpack_s64() without verifying they fit within the remaining buffer. A crafted NTFS image with truncated run data in an MFT attribute triggers an OOB heap read of up to 15 bytes when the filesystem is mounted. Add boundary checks before each run_unpack_s64() call to ensure the declared field size does not exceed the remaining buffer. Found by fuzzing with a source-patched harness (LibAFL + QEMU).

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46073
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when interrupted. This needs to abort the URB and return an error. No data has been received from the device so any reads from the transfer buffer are invalid. The original code tests !ret, which only catches the timeout case (0). On signal delivery (-ERESTARTSYS), !ret is false so the function skips usb_kill_urb() and falls through to read from the unfilled transfer buffer. Fix by capturing the return value into a long (matching the function return type) and handling signal (negative) and timeout (zero) cases with separate checks that both call usb_kill_urb() before returning.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46074
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix memory leaks on probe failures Make sure to deregister the controller, disable pins, and kill and free the RX URB on probe failures to mirror disconnect and avoid memory leaks and use-after-free. Also add an explicit URB kill on disconnect for symmetry (even if that is not strictly required as USB core would have stopped it in the current setup).

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46075
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path Unregister the hwrng to prevent new ->read() calls and flush the Atmel I2C workqueue before teardown to prevent a potential UAF if a queued callback runs while the device is being removed. Drop the early return to ensure sysfs entries are removed and ->hwrng.priv is freed, preventing a memory leak.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46076
HIGH7.9

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs]

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.9
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:H
References
CVE-2026-46077
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-tdes - fix DMA sync direction Before DMA output is consumed by the CPU, ->dma_addr_out must be synced with dma_sync_single_for_cpu() instead of dma_sync_single_for_device(). Using the wrong direction can return stale cache data on non-coherent platforms.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46078
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: erofs: fix the out-of-bounds nameoff handling for trailing dirents Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H
References
CVE-2026-46079
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rbd: fix null-ptr-deref when device_add_disk() fails do_rbd_add() publishes the device with device_add() before calling device_add_disk(). If device_add_disk() fails after device_add() succeeds, the error path calls rbd_free_disk() directly and then later falls through to rbd_dev_device_release(), which calls rbd_free_disk() again. This double teardown can leave blk-mq cleanup operating on invalid state and trigger a null-ptr-deref in __blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set(). Fix this by following the normal remove ordering: call device_del() before rbd_dev_device_release() when device_add_disk() fails after device_add(). That keeps the teardown sequence consistent and avoids re-entering disk cleanup through the wrong path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer confines failslab injections to the __add_disk() range and injects fail-nth while mapping an RBD image through /sys/bus/rbd/add_single_major. On the unpatched kernel, fail-nth=4 reliably triggered the fault: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240 Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00 RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246 RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4 RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004 FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0 PKRU: 55555554 Call Trace: blk_mq_free_tag_set+0x77/0x460 do_rbd_add+0x1446/0x2b80 ? __pfx_do_rbd_add+0x10/0x10 ? lock_acquire+0x18c/0x300 ? find_held_lock+0x2b/0x80 ? sysfs_file_kobj+0xb6/0x1b0 ? __pfx_sysfs_kf_write+0x10/0x10 kernfs_fop_write_iter+0x2f4/0x4a0 vfs_write+0x98e/0x1000 ? expand_files+0x51f/0x850 ? __pfx_vfs_write+0x10/0x10 ksys_write+0xf2/0x1d0 ? __pfx_ksys_write+0x10/0x10 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0fbea15907 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907 RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001 RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141 R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058 R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004 With this fix applied, rerunning the reproducer over fail-nth=1..256 yields no KASAN reports. [ idryomov: rename err_out_device_del -> err_out_device ]

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46080
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ocfs2: split transactions in dio completion to avoid credit exhaustion During ocfs2 dio operations, JBD2 may report warnings via following call trace: ocfs2_dio_end_io_write ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_try_to_merge_extent ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2__journal_restart start_this_handle output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449 To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to handle extents in a batch of transaction. Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode should only be removed from the orphan list after the extent tree update is complete. This ensures that if a crash occurs in the middle of extent tree updates, we won't leave stale blocks beyond EOF. This patch also changes the logic for updating the inode size and removing orphan, making it similar to ext4_dio_write_end_io(). Both operations are performed only when everything looks good. Finally, thanks to Jans and Joseph for providing the bug fix prototype and suggestions.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46081
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - fix wrong pointer stored by acomp_save_req() acomp_save_req() stores &req->chain in req->base.data. When acomp_reqchain_done() is invoked on asynchronous completion, it receives &req->chain as the data argument but casts it directly to struct acomp_req. Since data points to the chain member, all subsequent field accesses are at a wrong offset, resulting in memory corruption. The issue occurs when an asynchronous hardware implementation, such as the QAT driver, completes a request that uses the DMA virtual address interface (e.g. acomp_request_set_src_dma()). This combination causes crypto_acomp_compress() to enter the acomp_do_req_chain() path, which sets acomp_reqchain_done() as the completion callback via acomp_save_req(). With KASAN enabled, this manifests as a general protection fault in acomp_reqchain_done(): general protection fault, probably for non-canonical address 0xe000040000000000 KASAN: probably user-memory-access in range [0x0000400000000000-0x0000400000000007] RIP: 0010:acomp_reqchain_done+0x15b/0x4e0 Call Trace: qat_comp_alg_callback+0x5d/0xa0 [intel_qat] adf_ring_response_handler+0x376/0x8b0 [intel_qat] adf_response_handler+0x60/0x170 [intel_qat] tasklet_action_common+0x223/0x820 handle_softirqs+0x1ab/0x640 Fix this by storing the request itself in req->base.data instead of &req->chain, so that acomp_reqchain_done() receives the correct pointer. Simplify acomp_restore_req() accordingly to access req->chain directly.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46082
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to properly inject #UD when EFER.SVME=0. [sean: tag for stable@]

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46083
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: spi: fix resource leaks on device setup failure Make sure to call controller cleanup() if spi_setup() fails while registering a device to avoid leaking any resources allocated by setup().

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46084
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: Disable RX steering on RSS QP destroy When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss() destroys the RX WQ objects but does not disable vPort RX steering in firmware. This leaves stale steering configuration that still points to the destroyed RX objects. If traffic continues to arrive (e.g. peer VM is still transmitting) and the VF interface is subsequently brought up (mana_open), the firmware may deliver completions using stale CQ IDs from the old RX objects. These CQ IDs can be reused by the ethernet driver for new TX CQs, causing RX completions to land on TX CQs: WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false) WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails) Fix this by disabling vPort RX steering before destroying RX WQ objects. Note that mana_fence_rqs() cannot be used here because the fence completion is delivered on the CQ, which is polled by user-mode (e.g. DPDK) and not visible to the kernel driver. Refactor the disable logic into a shared mana_disable_vport_rx() in mana_en, exported for use by mana_ib, replacing the duplicate code. The ethernet driver's mana_dealloc_queues() is also updated to call this common function.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46085
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted).

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46086
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns.

Published: 2026-05-27Modified: 2026-06-24
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46087
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/damon/stat: fix memory leak on damon_start() failure in damon_stat_start() Destroy the DAMON context and reset the global pointer when damon_start() fails. Otherwise, the context allocated by damon_stat_build_ctx() is leaked, and the stale damon_stat_context pointer will be overwritten on the next enable attempt, making the old allocation permanently unreachable.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46088
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names() snd_ctl_elem_init_enum_names() advances pointer p through the names buffer while decrementing buf_len. If buf_len reaches zero but items remain, the next iteration calls strnlen(p, 0). While strnlen(p, 0) returns 0 and would hit the existing name_len == 0 error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks maxlen against __builtin_dynamic_object_size(). When Clang loses track of p's object size inside the loop, this triggers a BRK exception panic before the return value is examined. Add a buf_len == 0 guard at the loop entry to prevent calling fortified strnlen() on an exhausted buffer. Found by kernel fuzz testing through Xiaomi Smartphone.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46089
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: zram: do not forget to endio for partial discard requests As reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0 takes literally forever to complete. zram doesn't support partial discards and just returns immediately w/o doing any discard work in such cases. The problem is that we forget to endio on our way out, so blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to end_bio label, which does bio_endio().

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46090
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix peer runtime UAF during format-change stop loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit.

Published: 2026-05-27Modified: 2026-07-02
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46091
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: heed coherency rules In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46093
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: take vmap_purge_lock in shrinker decay_va_pool_node() can be invoked concurrently from two paths: __purge_vmap_area_lazy() when pools are being purged, and the shrinker via vmap_node_shrink_scan(). However, decay_va_pool_node() is not safe to run concurrently, and the shrinker path currently lacks serialization, leading to races and possible leaks. Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker path to ensure serialization with purge users.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46094
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-46095
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: raise barrier before state machine transition Move the barrier raise operation before calling llbitmap_state_machine() in both llbitmap_start_write() and llbitmap_start_discard(). This ensures the barrier is in place before any state transitions occur, preventing potential race conditions where the state machine could complete before the barrier is properly raised.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46096
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public() tpm2_read_public() calls tpm_buf_init() but fails to call tpm_buf_destroy() on two exit paths, leaking a page allocation: 1. When name_size() returns an error (unrecognized hash algorithm), the function returns directly without destroying the buffer. 2. On the success path, the buffer is never destroyed before returning. All other error paths in the function correctly call tpm_buf_destroy() before returning. Fix both by adding the missing tpm_buf_destroy() calls.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46097
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Input: edt-ft5x06 - fix use-after-free in debugfs teardown The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs directory") removed the manual debugfs teardown, relying on the I2C core to handle it. However, this creates a window where debugfs files are still accessible after edt_ft5x06_ts_teardown_debugfs() frees tsdata->raw_buffer. To prevent a use-after-free, protect the freeing of raw_buffer with the device mutex and set raw_buffer to NULL. The debugfs read function already checks if raw_buffer is NULL under the same mutex, so this safely avoids the use-after-free.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46098
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: caif: clear client service pointer on teardown `caif_connect()` can tear down an existing client after remote shutdown by calling `caif_disconnect_client()` followed by `caif_free_client()`. `caif_free_client()` releases the service layer referenced by `adap_layer->dn`, but leaves that pointer stale. When the socket is later destroyed, `caif_sock_destructor()` calls `caif_free_client()` again and dereferences the freed service pointer. Clear the client/service links before releasing the service object so repeated teardown becomes harmless.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46099
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels seg6_input_core() and rpl_input() call ip6_route_input() which sets a NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking dst_hold() unconditionally. On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can release the underlying pcpu_rt between the lookup and the caching through a concurrent FIB lookup on a shared nexthop. Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-free For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release the pcpu_rt. Shared nexthop objects provide such a path, as two routes pointing to the same nhid share the same fib6_nh and its rt6i_pcpu entry. Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after ip6_route_input() to force the NOREF dst into a refcounted one before caching. The output path is not affected as ip6_route_output() already returns a refcounted dst.

Published: 2026-05-27Modified: 2026-06-30
CVSS 3.xHIGH 8.1
CVSS:3.x/CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46100
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: fs: afs: revert mmap_prepare() change Partially reverts commit 9d5403b1036c ("fs: convert most other generic_file_*mmap() users to .mmap_prepare()"). This is because the .mmap invocation establishes a refcount, but .mmap_prepare is called at a point where a merge or an allocation failure might happen after the call, which would leak the refcount increment. Functionality is being added to permit the use of .mmap_prepare in this case, but in the interim, we need to fix this.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46101
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: reject zero shift in nft_bitwise Reject zero shift operands for nft_bitwise left and right shift expressions during initialization. The carry propagation logic computes the carry from the adjacent 32-bit word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this into a 32-bit shift, which is undefined behaviour. Reject zero shift operands in the control plane, alongside the existing check for values greater than or equal to 32, so malformed rules never reach the packet path.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46102
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: strparser: fix skb_head leak in strp_abort_strp() When the stream parser is aborted, for example after a message assembly timeout, it can still hold a reference to a partially assembled message in strp->skb_head. That skb is not released in strp_abort_strp(), which leaks the partially assembled message and can be triggered repeatedly to exhaust memory. Fix this by freeing strp->skb_head and resetting the parser state in the abort path. Leave strp_stop() unchanged so final cleanup still happens in strp_done() after the work and timer have been synchronized.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46103
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: ucan: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the control message buffer lifetime so that it is released on driver unbind.

Published: 2026-05-27Modified: 2026-06-25
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References