ALT-PU-2026-6805-16 — kernel-image-un-def

BDU:2026-04243

MEDIUM5.5

Уязвимость модуля fs/btrfs/inode.c ядра операционной системы Linux, позволяющая нарушителю получить доступ на чтение и изменение данных

Published: 2026-03-30Modified: 2026-05-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-04925

HIGH7.0

Уязвимость функции sco_recv_frame() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Published: 2026-04-08Modified: 2026-05-14

CVSS 3.xHIGH 7.0

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.0

CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C

References

BDU:2026-06493

MEDIUM5.5

Уязвимость функции tc_chain_fill_node() ядра операционных систем Linux, позволяющая нарушителю получить несанкционированный доступ к конфиденциальной информации

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-06495

HIGH8.4

Уязвимость функции pn532_receive_buf() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xHIGH 8.4

CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0HIGH 7.2

CVSS:2.0/AV:L/AC:L/Au:N/C:C/I:C/A:C

References

BDU:2026-06497

HIGH7.0

Уязвимость функции nf_conntrack_helper_unregister() ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xHIGH 7.0

CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.0

CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C

References

BDU:2026-06498

MEDIUM5.5

Уязвимость функции ctnetlink_alloc_expect() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-06499

HIGH7.3

Уязвимость функции hci_cmd_sync_queue_once() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-11Modified: 2026-05-14

CVSS 3.xHIGH 7.3

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:H

CVSS 2.0MEDIUM 6.4

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:P/A:C

References

BDU:2026-06501

HIGH8.4

Уязвимость функции nft_queue() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xHIGH 8.4

CVSS:3.x/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0HIGH 7.2

CVSS:2.0/AV:L/AC:L/Au:N/C:C/I:C/A:C

References

BDU:2026-06503

HIGH7.1

Уязвимость компонента netfilter x_tables ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность и доступность защищаемой информации

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xHIGH 7.1

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

CVSS 2.0MEDIUM 6.2

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:N/A:C

References

BDU:2026-06505

HIGH7.8

Уязвимость функции regsafe() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию или вызвать отказ в обслуживании

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xHIGH 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

References

BDU:2026-06508

HIGH8.8

Уязвимость функции hci_le_remote_conn_param_req_evt() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-11Modified: 2026-05-14

CVSS 3.xHIGH 8.8

CVSS:3.x/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0HIGH 8.3

CVSS:2.0/AV:A/AC:L/Au:N/C:C/I:C/A:C

References

BDU:2026-06510

MEDIUM5.5

Уязвимость модуля net/bluetooth/mgmt.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-11Modified: 2026-05-14

CVSS 3.xMEDIUM 5.5

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

CVSS 2.0MEDIUM 4.6

CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C

References

BDU:2026-06511

HIGH7.8

Уязвимость модуля drivers/net/ethernet/cadence/macb_pci.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-11Modified: 2026-05-26

CVSS 3.xHIGH 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

References

BDU:2026-07832

CRITICAL9.8

Уязвимость функции ip4ip6_err() модуля net/ipv6/ip6_tunnel.c ядра операционной системы Linux, позволяющая нарушителю выполнить произвольный код

Published: 2026-06-04Modified: 2026-06-18

CVSS 3.xCRITICAL 9.8

CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0CRITICAL 10.0

CVSS:2.0/AV:N/AC:L/Au:N/C:C/I:C/A:C

References

BDU:2026-07834

HIGH7.8

Уязвимость модуля net/bluetooth/mgmt.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-04Modified: 2026-06-18

CVSS 3.xHIGH 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

References

BDU:2026-07835

HIGH8.0

Уязвимость функции sock_def_readable() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-04Modified: 2026-06-18

CVSS 3.xHIGH 8.0

CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0HIGH 7.7

CVSS:2.0/AV:A/AC:L/Au:S/C:C/I:C/A:C

References

BDU:2026-07837

HIGH7.8

Уязвимость функции sco_sock_connect() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-04Modified: 2026-06-18

CVSS 3.xHIGH 7.8

CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

CVSS 2.0MEDIUM 6.8

CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C

References

CVE-2025-71269

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not free data reservation in fallback from inline due to -ENOSPC If we fail to create an inline extent due to -ENOSPC, we will attempt to go through the normal COW path, reserve an extent, create an ordered extent, etc. However we were always freeing the reserved qgroup data, which is wrong since we will use data. Fix this by freeing the reserved qgroup data in __cow_file_range_inline() only if we are not doing the fallback (ret is <= 0).

Published: 2026-03-18Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23360

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nvme: fix admin queue leak on controller reset When nvme_alloc_admin_tag_set() is called during a controller reset, a previous admin queue may still exist. Release it properly before allocating a new one to avoid orphaning the old queue. This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime").

Published: 2026-03-25Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23401

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE When installing an emulated MMIO SPTE, do so after dropping/zapping the existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was right about it being impossible to convert a shadow-present SPTE to an MMIO SPTE due to a _guest_ write, it failed to account for writes to guest memory that are outside the scope of KVM. E.g. if host userspace modifies a shadowed gPTE to switch from a memslot to emulted MMIO and then the guest hits a relevant page fault, KVM will install the MMIO SPTE without first zapping the shadow-present SPTE. ------------[ cut here ]------------ is_shadow_present_pte(*sptep) WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292 Modules linked in: kvm_intel kvm irqbypass CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm] Call Trace: mmu_set_spte+0x237/0x440 [kvm] ept_page_fault+0x535/0x7f0 [kvm] kvm_mmu_do_page_fault+0xee/0x1f0 [kvm] kvm_mmu_page_fault+0x8d/0x620 [kvm] vmx_handle_exit+0x18c/0x5a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0x730 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47fa3f ---[ end trace 0000000000000000 ]---

Published: 2026-04-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-23414

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tls: Purge async_hold in tls_decrypt_async_wait() The async_hold queue pins encrypted input skbs while the AEAD engine references their scatterlist data. Once tls_decrypt_async_wait() returns, every AEAD operation has completed and the engine no longer references those skbs, so they can be freed unconditionally. A subsequent patch adds batch async decryption to tls_sw_read_sock(), introducing a new call site that must drain pending AEAD operations and release held skbs. Move __skb_queue_purge(&ctx->async_hold) into tls_decrypt_async_wait() so the purge is centralized and every caller -- recvmsg's drain path, the -EBUSY fallback in tls_do_decryption(), and the new read_sock batch path -- releases held skbs on synchronization without each site managing the purge independently. This fixes a leak when tls_strp_msg_hold() fails part-way through, after having added some cloned skbs to the async_hold queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to process all pending decrypts, and drop back to synchronous mode, but tls_sw_recvmsg() only flushes the async_hold queue when one record has been processed in "fully-async" mode, which may not be the case here. [pabeni@redhat.com: added leak comment]

Published: 2026-04-02Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31408

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately releases the lock without holding a reference to the socket. A concurrent close() can free the socket between the lock release and the subsequent sk->sk_state access, resulting in a use-after-free. Other functions in the same file (sco_sock_timeout(), sco_conn_del()) correctly use sco_sock_hold() to safely hold a reference under the lock. Fix by using sco_sock_hold() to take a reference before releasing the lock, and adding sock_put() on all exit paths.

Published: 2026-04-06Modified: 2026-06-17

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31414

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use expect->helper Use expect->helper in ctnetlink and /proc to dump the helper name. Using nfct_help() without holding a reference to the master conntrack is unsafe. Use exp->master->helper in ctnetlink path if userspace does not provide an explicit helper when creating an expectation to retain the existing behaviour. The ctnetlink expectation path holds the reference on the master conntrack and nf_conntrack_expect lock and the nfnetlink glue path refers to the master ct that is attached to the skb.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31415

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid overflows in ip6_datagram_send_ctl() Yiming Qian reported : I believe I found a locally triggerable kernel bug in the IPv6 sendmsg ancillary-data path that can panic the kernel via `skb_under_panic()` (local DoS). The core issue is a mismatch between: - a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type `__u16`) and - a pointer to the last provided destination-options header (`opt->dst1opt`) when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided. - `include/net/ipv6.h`: - `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible). (lines 291-307, especially 298) - `net/ipv6/datagram.c:ip6_datagram_send_ctl()`: - Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen` without rejecting duplicates. (lines 909-933) - `net/ipv6/ip6_output.c:__ip6_append_data()`: - Uses `opt->opt_flen + opt->opt_nflen` to compute header sizes/headroom decisions. (lines 1448-1466, especially 1463-1465) - `net/ipv6/ip6_output.c:__ip6_make_skb()`: - Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero. (lines 1930-1934) - `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`: - Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the pointed-to header). (lines 1179-1185 and 1206-1211) 1. `opt_flen` is a 16-bit accumulator: - `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr /`. 2. `ip6_datagram_send_ctl()` accepts repeated* `IPV6_DSTOPTS` cmsgs and increments `opt_flen` each time: - In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`: - It computes `len = ((hdr->hdrlen + 1) << 3);` - It checks `CAP_NET_RAW` using `ns_capable(net->user_ns, CAP_NET_RAW)`. (line 922) - Then it does: - `opt->opt_flen += len;` (line 927) - `opt->dst1opt = hdr;` (line 928) There is no duplicate rejection here (unlike the legacy `IPV6_2292DSTOPTS` path which rejects duplicates at `net/ipv6/datagram.c:901-904`). If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps while `dst1opt` still points to a large (2048-byte) destination-options header. In the attached PoC (`poc.c`): - 32 cmsgs with `hdrlen=255` => `len = (255+1)8 = 2048` - 1 cmsg with `hdrlen=0` => `len = 8` - Total increment: `322048 + 8 = 65544`, so `(__u16)opt_flen == 8` - The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header. 3. The transmit path sizes headers using the wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1463-1465`: - `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen + opt->opt_nflen : 0) + ...;` With wrapped `opt_flen`, `headersize`/headroom decisions underestimate what will be pushed later. 4. When building the final skb, the actual push length comes from `dst1opt` and is not limited by wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1930-1934`: - `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);` - In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes `dst1opt` via `ipv6_push_exthdr()`. - In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does: - `skb_push(skb, ipv6_optlen(opt));` - `memcpy(h, opt, ipv6_optlen(opt));` With insufficient headroom, `skb_push()` underflows and triggers `skb_under_panic()` -> `BUG()`: - `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`) - `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`) - The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`). - Root (or any task with `CAP_NET_RAW`) can trigger this without user namespaces. - An unprivileged `uid=1000` user can trigger this if unprivileged user namespaces are enabled and it can create a userns+netns to obtain namespaced `CAP_NET_RAW` (the attached PoC does this). - Local denial of service: kernel BUG/panic (system crash). - ---truncated---

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31416

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: account for netlink header size This is a followup to an old bug fix: NLMSG_DONE needs to account for the netlink header size, not just the attribute size. This can result in a WARN splat + drop of the netlink message, but other than this there are no ill effects.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31417

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix overflow when accumulating packets Add a check to ensure that `x25_sock.fraglen` does not overflow. The `fraglen` also needs to be resetted when purging `fragment_queue` in `x25_clear_queues()`.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31418

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: drop logically empty buckets in mtype_del mtype_del() counts empty slots below n->pos in k, but it only drops the bucket when both n->pos and k are zero. This misses buckets whose live entries have all been removed while n->pos still points past deleted slots. Treat a bucket as empty when all positions below n->pos are unused and release it directly instead of shrinking it further.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31421

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31422

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] =======================================================================

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31423

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: fix divide-by-zero in rtsc_min() m2sm() converts a u32 slope to a u64 scaled value. For large inputs (e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores the difference of two such u64 values in a u32 variable `dsm` and uses it as a divisor. When the difference is exactly 2^32 the truncation yields zero, causing a divide-by-zero oops in the concave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...] Widen `dsm` to u64 and replace do_div() with div64_u64() so the full difference is preserved.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31424

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31425

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rds: ib: reject FRMR registration before IB connection is established rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with i_cm_id = NULL because the connection worker has not yet called rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses the control message before any connection establishment, allowing rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the kernel. The existing guard in rds_ib_reg_frmr() only checks for !ic (added in commit 9e630bcb7701), which does not catch this case since ic is allocated early and is always non-NULL once the connection object exists. KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920 Call Trace: rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167) rds_ib_map_frmr (net/rds/ib_frmr.c:252) rds_ib_reg_frmr (net/rds/ib_frmr.c:430) rds_ib_get_mr (net/rds/ib_rdma.c:615) __rds_rdma_map (net/rds/rdma.c:295) rds_cmsg_rdma_map (net/rds/rdma.c:860) rds_sendmsg (net/rds/send.c:1363) ____sys_sendmsg do_syscall_64 Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all non-NULL before proceeding with FRMR registration, mirroring the guard already present in rds_ib_post_inv(). Return -ENODEV when the connection is not ready, which the existing error handling in rds_cmsg_send() converts to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to start the connection worker.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31426

HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xHIGH 7.0

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31427

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp process_sdp() declares union nf_inet_addr rtp_addr on the stack and passes it to the nf_nat_sip sdp_session hook after walking the SDP media descriptions. However rtp_addr is only initialized inside the media loop when a recognized media type with a non-zero port is found. If the SDP body contains no m= lines, only inactive media sections (m=audio 0 ...) or only unrecognized media types, rtp_addr is never assigned. Despite that, the function still calls hooks->sdp_session() with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack value as an IP address and rewrite the SDP session owner and connection lines with it. With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this results in the session-level o= and c= addresses being rewritten to 0.0.0.0 for inactive SDP sessions. Without stack auto-init the rewritten address is whatever happened to be on the stack. Fix this by pre-initializing rtp_addr from the session-level connection address (caddr) when available, and tracking via a have_rtp_addr flag whether any valid address was established. Skip the sdp_session hook entirely when no valid address exists.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31428

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD __build_packet_message() manually constructs the NFULA_PAYLOAD netlink attribute using skb_put() and skb_copy_bits(), bypassing the standard nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes are allocated (including NLA alignment padding), only data_len bytes of actual packet data are copied. The trailing nla_padlen(data_len) bytes (1-3 when data_len is not 4-byte aligned) are never initialized, leaking stale heap contents to userspace via the NFLOG netlink socket. Replace the manual attribute construction with nla_reserve(), which handles the tailroom check, header setup, and padding zeroing via __nla_reserve(). The subsequent skb_copy_bits() fills in the payload data on top of the properly initialized attribute.

Published: 2026-04-13Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31433

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potencial OOB in get_file_all_info() for compound requests When a compound request consists of QUERY_DIRECTORY + QUERY_INFO (FILE_ALL_INFORMATION) and the first command consumes nearly the entire max_trans_size, get_file_all_info() would blindly call smbConvertToUTF16() with PATH_MAX, causing out-of-bounds write beyond the response buffer. In get_file_all_info(), there was a missing validation check for the client-provided OutputBufferLength before copying the filename into FileName field of the smb2_file_all_info structure. If the filename length exceeds the available buffer space, it could lead to potential buffer overflows or memory corruption during smbConvertToUTF16 conversion. This calculating the actual free buffer size using smb2_calc_max_out_buf_len() and returning -EINVAL if the buffer is insufficient and updating smbConvertToUTF16 to use the actual filename length (clamped by PATH_MAX) to ensure a safe copy operation.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31434

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix leak of kobject name for sub-group space_info When create_space_info_sub_group() allocates elements of space_info->sub_group[], kobject_init_and_add() is called for each element via btrfs_sysfs_add_space_info_type(). However, when check_removing_space_info() frees these elements, it does not call btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is not called and the associated kobj->name objects are leaked. This memory leak is reproduced by running the blktests test case zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak feature reports the following error: unreferenced object 0xffff888112877d40 (size 16): comm "mount", pid 1244, jiffies 4294996972 hex dump (first 16 bytes): 64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc...... backtrace (crc 53ffde4d): __kmalloc_node_track_caller_noprof+0x619/0x870 kstrdup+0x42/0xc0 kobject_set_name_vargs+0x44/0x110 kobject_init_and_add+0xcf/0x150 btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs] create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs] create_space_info+0x211/0x320 [btrfs] btrfs_init_space_info+0x15a/0x1b0 [btrfs] open_ctree+0x33c7/0x4a50 [btrfs] btrfs_get_tree.cold+0x9f/0x1ee [btrfs] vfs_get_tree+0x87/0x2f0 vfs_cmd_create+0xbd/0x280 __do_sys_fsconfig+0x3df/0x990 do_syscall_64+0x136/0x1540 entry_SYSCALL_64_after_hwframe+0x76/0x7e To avoid the leak, call btrfs_sysfs_remove_space_info() instead of kfree() for the elements.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31441

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix memory leak when a wq is reset idxd_wq_disable_cleanup() which is called from the reset path for a workqueue, sets the wq type to NONE, which for other parts of the driver mean that the wq is empty (all its resources were released). Only set the wq type to NONE after its resources are released.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31446

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

References

CVE-2026-31447

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H

References

CVE-2026-31448

CRITICAL9.4

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid infinite loops caused by residual data On the mkdir/mknod path, when mapping logical blocks to physical blocks, if inserting a new extent into the extent tree fails (in this example, because the file system disabled the huge file feature when marking the inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to reclaim the physical block without deleting the corresponding data in the extent tree. This causes subsequent mkdir operations to reference the previously reclaimed physical block number again, even though this physical block is already being used by the xattr block. Therefore, a situation arises where both the directory and xattr are using the same buffer head block in memory simultaneously. The above causes ext4_xattr_block_set() to enter an infinite loop about "inserted" and cannot release the inode lock, ultimately leading to the 143s blocking problem mentioned in [1]. If the metadata is corrupted, then trying to remove some extent space can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE was passed, remove space wrongly update quota information. Jan Kara suggests distinguishing between two cases: 1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully consistent and we must maintain its consistency including all the accounting. However these errors can happen only early before we've inserted the extent into the extent tree. So current code works correctly for this case. 2) Some other error - this means metadata is corrupted. We should strive to do as few modifications as possible to limit damage. So I'd just skip freeing of allocated blocks. [1] INFO: task syz.0.17:5995 blocked for more than 143 seconds. Call Trace: inode_lock_nested include/linux/fs.h:1073 [inline] __start_dirop fs/namei.c:2923 [inline] start_dirop fs/namei.c:2934 [inline]

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xCRITICAL 9.4

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H

References

CVE-2026-31450

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31452

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31453

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfs: avoid dereferencing log items after push callbacks After xfsaild_push_item() calls iop_push(), the log item may have been freed if the AIL lock was dropped during the push. Background inode reclaim or the dquot shrinker can free the log item while the AIL lock is not held, and the tracepoints in the switch statement dereference the log item after iop_push() returns. Fix this by capturing the log item type, flags, and LSN before calling xfsaild_push_item(), and introducing a new xfs_ail_push_class trace event class that takes these pre-captured values and the ailp pointer instead of the log item pointer.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31454

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31455

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31464

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done() A malicious or compromised VIO server can return a num_written value in the discover targets MAD response that exceeds max_targets. This value is stored directly in vhost->num_targets without validation, and is then used as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which is only allocated for max_targets entries. Indices at or beyond max_targets access kernel memory outside the DMA-coherent allocation. The out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI MADs that are sent back to the VIO server, leaking kernel memory. Fix by clamping num_written to max_targets before storing it.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-31466

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix folio isn't locked in softleaf_to_folio() On arm64 server, we found folio that get from migration entry isn't locked in softleaf_to_folio(). This issue triggers when mTHP splitting and zap_nonpresent_ptes() races, and the root cause is lack of memory barrier in softleaf_to_folio(). The race is as follows: CPU0 CPU1 deferred_split_scan() zap_nonpresent_ptes() lock folio split_folio() unmap_folio() change ptes to migration entries __split_folio_to_order() softleaf_to_folio() set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry)) smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio)) prep_compound_page() for tail pages In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages are visible before the tail page becomes non-compound. smp_wmb() should be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a result, if zap_nonpresent_ptes() accesses migration entry that stores tail pfn, softleaf_to_folio() may see the updated compound_head of tail page before page->flags. This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio() because of the race between folio split and zap_nonpresent_ptes() leading to a folio incorrectly undergoing modification without a folio lock being held. This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further swapops predicates"), which in merged in v6.19-rc1. To fix it, add missing smp_rmb() if the softleaf entry is migration entry in softleaf_to_folio() and softleaf_to_page(). [tujinjiang@huawei.com: update function name and comments]

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31467

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: erofs: add GFP_NOIO in the bio completion if needed The bio completion path in the process context (e.g. dm-verity) will directly call into decompression rather than trigger another workqueue context for minimal scheduling latencies, which can then call vm_map_ram() with GFP_KERNEL. Due to insufficient memory, vm_map_ram() may generate memory swapping I/O, which can cause submit_bio_wait to deadlock in some scenarios. Trimmed down the call stack, as follows: f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!! Use memalloc_noio_{save,restore}() to wrap up this path.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31469

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31473

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31476

HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: ksmbd: do not expire session on binding failure When a multichannel session binding request fails (e.g. wrong password), the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED. However, during binding, sess points to the target session looked up via ksmbd_session_lookup_slowpath() -- which belongs to another connection's user. This allows a remote attacker to invalidate any active session by simply sending a binding request with a wrong password (DoS). Fix this by skipping session expiration when the failed request was a binding attempt, since the session does not belong to the current connection. The reference taken by ksmbd_session_lookup_slowpath() is still correctly released via ksmbd_user_session_put().

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 8.2

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H

References

CVE-2026-31477

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leaks and NULL deref in smb2_lock() smb2_lock() has three error handling issues after list_del() detaches smb_lock from lock_list at no_check_cl: 1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK path, goto out leaks smb_lock and its flock because the out: handler only iterates lock_list and rollback_list, neither of which contains the detached smb_lock. 2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out leaks smb_lock and flock for the same reason. The error code returned to the dispatcher is also stale. 3) In the rollback path, smb_flock_init() can return NULL on allocation failure. The result is dereferenced unconditionally, causing a kernel NULL pointer dereference. Add a NULL check to prevent the crash and clean up the bookkeeping; the VFS lock itself cannot be rolled back without the allocation and will be released at file or connection teardown. Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before the if(!rc) check in the UNLOCK branch so all exit paths share one free site, and by freeing smb_lock and flock before goto out in the non-UNLOCK branch. Propagate the correct error code in both cases. Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding a NULL check for locks_free_lock(rlock) in the shared cleanup. Found via call-graph analysis using sqry.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31478

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len() After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"), response buffer management was changed to use dynamic iov array. In the new design, smb2_calc_max_out_buf_len() expects the second argument (hdr2_len) to be the offset of ->Buffer field in the response structure, not a hardcoded magic number. Fix the remaining call sites to use the correct offsetof() value.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31480

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential deadlock in cpu hotplug with osnoise The following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK] Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31483

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31485

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove().

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31492

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Initialize free_qp completion before using it In irdma_create_qp, if ib_copy_to_udata fails, it will call irdma_destroy_qp to clean up which will attempt to wait on the free_qp completion, which is not initialized yet. Fix this by initializing the completion before the ib_copy_to_udata call.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31494

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333 flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff) raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== Fix it by making sure the copied size only considers the active number of queues.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31495

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31496

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc").

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31497

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: clamp SCO altsetting table indices btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[].

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31498

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED state to support L2CAP reconfiguration (e.g. MTU changes). However, since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from the initial configuration, the reconfiguration path falls through to l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and retrans_list without freeing the previous allocations and sets chan->sdu to NULL without freeing the existing skb. This leaks all previously allocated ERTM resources. Additionally, l2cap_parse_conf_req() does not validate the minimum value of remote_mps derived from the RFC max_pdu_size option. A zero value propagates to l2cap_segment_sdu() where pdu_len becomes zero, causing the while loop to never terminate since len is never decremented, exhausting all available memory. Fix the double-init by skipping l2cap_ertm_init() and l2cap_chan_ready() when the channel is already in BT_CONNECTED state, while still allowing the reconfiguration parameters to be updated through l2cap_parse_conf_req(). Also add a pdu_len zero check in l2cap_segment_sdu() as a safeguard.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31503

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: udp: Fix wildcard bind conflict check when using hash2 When binding a udp_sock to a local address and port, UDP uses two hashes (udptable->hash and udptable->hash2) for collision detection. The current code switches to "hash2" when hslot->count > 10. "hash2" is keyed by local address and local port. "hash" is keyed by local port only. The issue can be shown in the following bind sequence (pseudo code): bind(fd1, "[fd00::1]:8888") bind(fd2, "[fd00::2]:8888") bind(fd3, "[fd00::3]:8888") bind(fd4, "[fd00::4]:8888") bind(fd5, "[fd00::5]:8888") bind(fd6, "[fd00::6]:8888") bind(fd7, "[fd00::7]:8888") bind(fd8, "[fd00::8]:8888") bind(fd9, "[fd00::9]:8888") bind(fd10, "[fd00::10]:8888") /* Correctly return -EADDRINUSE because "hash" is used * instead of "hash2". udp_lib_lport_inuse() detects the * conflict. / bind(fail_fd, "[::]:8888") / After one more socket is bound to "[fd00::11]:8888", * hslot->count exceeds 10 and "hash2" is used instead. / bind(fd11, "[fd00::11]:8888") bind(fail_fd, "[::]:8888") / succeeds unexpectedly */ The same issue applies to the IPv4 wildcard address "0.0.0.0" and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For example, if there are existing sockets bound to "192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or "[::ffff:0.0.0.0]:8888" can also miss the conflict when hslot->count > 10. TCP inet_csk_get_port() already has the correct check in inet_use_bhash2_on_bind(). Rename it to inet_use_hash2_on_bind() and move it to inet_hashtables.h so udp.c can reuse it in this fix.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31504

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31507

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores the pointer in pipe_buffer.private. The pipe_buf_operations for these buffers used .get = generic_pipe_buf_get, which only increments the page reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv pointer itself was not handled, so after tee() both the original and the cloned pipe_buffer share the same smc_spd_priv *. When both pipes are subsequently released, smc_rx_pipe_buf_release() is called twice against the same object: 1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct] 2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF] KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which then escalates to a NULL-pointer dereference and kernel panic via smc_rx_update_consumer() when it chases the freed priv->smc pointer: BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0 Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74 Call Trace: dump_stack_lvl+0x53/0x70 print_report+0xce/0x650 kasan_report+0xc6/0x100 smc_rx_pipe_buf_release+0x78/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 fput+0x1c6/0x490 x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f BUG: kernel NULL pointer dereference, address: 0000000000000020 RIP: 0010:smc_rx_update_consumer+0x8d/0x350 Call Trace: smc_rx_pipe_buf_release+0x121/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 fput+0x1c6/0x490 x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Beyond the memory-safety problem, duplicating an SMC splice buffer is semantically questionable: smc_rx_update_cons() would advance the consumer cursor twice for the same data, corrupting receive-window accounting. A refcount on smc_spd_priv could fix the double-free, but the cursor-accounting issue would still need to be addressed separately. The .get callback is invoked by both tee(2) and splice_pipe_to_pipe() for partial transfers; both will now return -EFAULT. Users who need to duplicate SMC socket data must use a copy-based read path.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31508

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Avoid releasing netdev before teardown completes The patch cited in the Fixes tag below changed the teardown code for OVS ports to no longer unconditionally take the RTNL. After this change, the netdev_destroy() callback can proceed immediately to the call_rcu() invocation if the IFF_OVS_DATAPATH flag is already cleared on the netdev. The ovs_netdev_detach_dev() function clears the flag before completing the unregistration, and if it gets preempted after clearing the flag (as can happen on an -rt kernel), netdev_destroy() can complete and the device can be freed before the unregistration completes. This leads to a splat like: [ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI [ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT [ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025 [ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0 [ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90 [ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246 [ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000 [ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05 [ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000 [ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006 [ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000 [ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000 [ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0 [ 998.393944] PKRU: 55555554 [ 998.393946] Call Trace: [ 998.393949] [ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch] [ 998.394009] ? __die_body.cold+0x8/0x12 [ 998.394016] ? die_addr+0x3c/0x60 [ 998.394027] ? exc_general_protection+0x16d/0x390 [ 998.394042] ? asm_exc_general_protection+0x26/0x30 [ 998.394058] ? dev_set_promiscuity+0x8d/0xa0 [ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch] [ 998.394092] dp_device_event+0x41/0x80 [openvswitch] [ 998.394102] notifier_call_chain+0x5a/0xd0 [ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60 [ 998.394110] rtnl_dellink+0x169/0x3e0 [ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0 [ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0 [ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0 [ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 998.394132] netlink_rcv_skb+0x50/0x100 [ 998.394138] netlink_unicast+0x292/0x3f0 [ 998.394141] netlink_sendmsg+0x21b/0x470 [ 998.394145] ____sys_sendmsg+0x39d/0x3d0 [ 998.394149] ___sys_sendmsg+0x9a/0xe0 [ 998.394156] __sys_sendmsg+0x7a/0xd0 [ 998.394160] do_syscall_64+0x7f/0x170 [ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 998.394165] RIP: 0033:0x7fad61bf4724 [ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 [ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724 [ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003 [ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f [ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2 ---truncated---

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31509

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix circular locking dependency in nci_close_device nci_close_device() flushes rx_wq and tx_wq while holding req_lock. This causes a circular locking dependency because nci_rx_work() running on rx_wq can end up taking req_lock too: nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete -> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target -> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock) Move the flush of rx_wq after req_lock has been released. This should safe (I think) because NCI_UP has already been cleared and the transport is closed, so the work will see it and return -ENETDOWN. NIPA has been hitting this running the nci selftest with a debug kernel on roughly 4% of the runs.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31510

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb Before using sk pointer, check if it is null. Fix the following: KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267] CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025 Workqueue: events l2cap_info_timeout RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce veth0_macvtap: entered promiscuous mode RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0 PKRU: 55555554 Call Trace: __kasan_check_byte+0x12/0x40 lock_acquire+0x79/0x2e0 lock_sock_nested+0x48/0x100 ? l2cap_sock_ready_cb+0x46/0x160 l2cap_sock_ready_cb+0x46/0x160 l2cap_conn_start+0x779/0xff0 ? __pfx_l2cap_conn_start+0x10/0x10 ? l2cap_info_timeout+0x60/0xa0 ? pfx_mutex_lock+0x10/0x10 l2cap_info_timeout+0x68/0xa0 ? process_scheduled_works+0xa8d/0x18c0 process_scheduled_works+0xb6e/0x18c0 ? __pfx_process_scheduled_works+0x10/0x10 ? assign_work+0x3d5/0x5e0 worker_thread+0xa53/0xfc0 kthread+0x388/0x470 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x51e/0xb90 ? __pfx_ret_from_fork+0x10/0x10 veth1_macvtap: entered promiscuous mode ? __switch_to+0xc7d/0x1450 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Modules linked in: ---[ end trace 0000000000000000 ]--- batman_adv: batadv0: Interface activated: batadv_slave_0 batman_adv: batadv0: Interface activated: batadv_slave_1 netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce ieee80211 phy39: Selected rate control algorithm 'minstrel_ht' RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31512

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv() l2cap_ecred_data_rcv() reads the SDU length field from skb->data using get_unaligned_le16() without first verifying that skb contains at least L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads past the valid data in the skb. The ERTM reassembly path correctly calls pskb_may_pull() before reading the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the same validation to the Enhanced Credit Based Flow Control data path.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31515

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: af_key: validate families in pfkey_send_migrate() syzbot was able to trigger a crash in skb_put() [1] Issue is that pfkey_send_migrate() does not check old/new families, and that set_ipsecrequest() @family argument was truncated, thus possibly overfilling the skb. Validate families early, do not wait set_ipsecrequest(). [1] skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev: kernel BUG at net/core/skbuff.c:214 ! Call Trace: skb_over_panic net/core/skbuff.c:219 [inline] skb_put+0x159/0x210 net/core/skbuff.c:2655 skb_put_zero include/linux/skbuff.h:2788 [inline] set_ipsecrequest net/key/af_key.c:3532 [inline] pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636 km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848 xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705 xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31518

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: esp: fix skb leak with espintcp and async crypto When the TX queue for espintcp is full, esp_output_tail_tcp will return an error and not free the skb, because with synchronous crypto, the common xfrm output code will drop the packet for us. With async crypto (esp_output_done), we need to drop the skb when esp_output_tail_tcp returns an error.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31519

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create We have recently observed a number of subvolumes with broken dentries. ls-ing the parent dir looks like: drwxrwxrwt 1 root root 16 Jan 23 16:49 . drwxr-xr-x 1 root root 24 Jan 23 16:48 .. d????????? ? ? ? ? ? broken_subvol and similarly stat-ing the file fails. In this state, deleting the subvol fails with ENOENT, but attempting to create a new file or subvol over it errors out with EEXIST and even aborts the fs. Which leaves us a bit stuck. dmesg contains a single notable error message reading: "could not do orphan cleanup -2" 2 is ENOENT and the error comes from the failure handling path of btrfs_orphan_cleanup(), with the stack leading back up to btrfs_lookup(). btrfs_lookup btrfs_lookup_dentry btrfs_orphan_cleanup // prints that message and returns -ENOENT After some detailed inspection of the internal state, it became clear that: - there are no orphan items for the subvol - the subvol is otherwise healthy looking, it is not half-deleted or anything, there is no drop progress, etc. - the subvol was created a while ago and does the meaningful first btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much later. - after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT, which results in a negative dentry for the subvolume via d_splice_alias(NULL, dentry), leading to the observed behavior. The bug can be mitigated by dropping the dentry cache, at which point we can successfully delete the subvolume if we want. i.e., btrfs_lookup() btrfs_lookup_dentry() if (!sb_rdonly(inode->vfs_inode)->vfs_inode) btrfs_orphan_cleanup(sub_root) test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) btrfs_search_slot() // finds orphan item for inode N ... prints "could not do orphan cleanup -2" if (inode == ERR_PTR(-ENOENT)) inode = NULL; return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) on the root when it runs, so it cannot run more than once on a given root, so something else must run concurrently. However, the obvious routes to deleting an orphan when nlinks goes to 0 should not be able to run without first doing a lookup into the subvolume, which should run btrfs_orphan_cleanup() and set the bit. The final important observation is that create_subvol() calls d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if the dentry cache gets dropped, the next lookup into the subvolume will make a real call into btrfs_orphan_cleanup() for the first time. This opens up the possibility of concurrently deleting the inode/orphan items but most typical evict() paths will be holding a reference on the parent dentry (child dentry holds parent->d_lockref.count via dget in d_alloc(), released in __dentry_kill()) and prevent the parent from being removed from the dentry cache. The one exception is delayed iputs. Ordered extent creation calls igrab() on the inode. If the file is unlinked and closed while those refs are held, iput() in __dentry_kill() decrements i_count but does not trigger eviction (i_count > 0). The child dentry is freed and the subvol dentry's d_lockref.count drops to 0, making it evictable while the inode is still alive. Since there are two races (the race between writeback and unlink and the race between lookup and delayed iputs), and there are too many moving parts, the following three diagrams show the complete picture. (Only the second and third are races) Phase 1: Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set btrfs_mksubvol() lookup_one_len() __lookup_slow() d_alloc_parallel() __d_alloc() // d_lockref.count = 1 create_subvol(dentry) // doesn't touch the bit.. d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c ---truncated---

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31520

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: apple: avoid memory leak in apple_report_fixup() The apple_report_fixup() function was returning a newly kmemdup()-allocated buffer, but never freeing it. The caller of report_fixup() does not take ownership of the returned pointer, but it is permitted to return a sub-portion of the input rdesc, whose lifetime is managed by the caller.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31521

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: module: Fix kernel panic when a symbol st_shndx is out of bounds The module loader doesn't check for bounds of the ELF section index in simplify_symbols(): for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) { const char name = info->strtab + sym[i].st_name; switch (sym[i].st_shndx) { case SHN_COMMON: [...] default: / Divert to percpu allocation if a percpu var. */ if (sym[i].st_shndx == info->index.pcpu) secbase = (unsigned long)mod_percpu(mod); else / HERE --> / secbase = info->sechdrs[sym[i].st_shndx].sh_addr; sym[i].st_value += secbase; break; } } A symbol with an out-of-bounds st_shndx value, for example 0xffff (known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic: BUG: unable to handle page fault for address: ... RIP: 0010:simplify_symbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exception This can happen when module ELF is legitimately using SHN_XINDEX or when it is corrupted. Add a bounds check in simplify_symbols() to validate that st_shndx is within the valid range before using it. This issue was discovered due to a bug in llvm-objcopy, see relevant discussion for details [1]. [1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31522

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: avoid memory leak in magicmouse_report_fixup() The magicmouse_report_fixup() function was returning a newly kmemdup()-allocated buffer, but never freeing it. The caller of report_fixup() does not take ownership of the returned pointer, but it is permitted to return a sub-portion of the input rdesc, whose lifetime is managed by the caller.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31523

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: ensure we're polling a polled queue A user can change the polled queue count at run time. There's a brief window during a reset where a hipri task may try to poll that queue before the block layer has updated the queue maps, which would race with the now interrupt driven queue and may cause double completions.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31524

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: asus: avoid memory leak in asus_report_fixup() The asus_report_fixup() function was returning a newly allocated kmemdup()-allocated buffer, but never freeing it. Switch to devm_kzalloc() to ensure the memory is managed and freed automatically when the device is removed. The caller of report_fixup() does not take ownership of the returned pointer, but it is permitted to return a pointer whose lifetime is at least that of the input buffer. Also fix a harmless out-of-bounds read by copying only the original descriptor size.

Published: 2026-04-22Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31555

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi.

Published: 2026-04-24Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31563

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: macb: Use dev_consume_skb_any() to free TX SKBs The napi_consume_skb() function is not intended to be called in an IRQ disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs disabled. To resolve the following call trace, use dev_consume_skb_any() for freeing TX SKBs: WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15 Modules linked in: CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __local_bh_enable_ip+0x174/0x188 lr : local_bh_enable+0x24/0x38 sp : ffff800082b3bb10 x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0 x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80 x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000 x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001 x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000 x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650 x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258 x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc Call trace: __local_bh_enable_ip+0x174/0x188 (P) local_bh_enable+0x24/0x38 skb_attempt_defer_free+0x190/0x1d8 napi_consume_skb+0x58/0x108 macb_tx_poll+0x1a4/0x558 __napi_poll+0x50/0x198 net_rx_action+0x1f4/0x3d8 handle_softirqs+0x16c/0x560 run_ksoftirqd+0x44/0x80 smpboot_thread_fn+0x1d8/0x338 kthread+0x120/0x150 ret_from_fork+0x10/0x20 irq event stamp: 29751 hardirqs last enabled at (29750): [] _raw_spin_unlock_irqrestore+0x44/0x88 hardirqs last disabled at (29751): [] _raw_spin_lock_irqsave+0x38/0x98 softirqs last enabled at (29150): [] handle_softirqs+0x504/0x560 softirqs last disabled at (29153): [] run_ksoftirqd+0x44/0x80

Published: 2026-04-24Modified: 2026-06-17

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31565

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix deadlock during netdev reset with active connections Resolve deadlock that occurs when user executes netdev reset while RDMA applications (e.g., rping) are active. The netdev reset causes ice driver to remove irdma auxiliary driver, triggering device_delete and subsequent client removal. During client removal, uverbs_client waits for QP reference count to reach zero while cma_client holds the final reference, creating circular dependency and indefinite wait in iWARP mode. Skip QP reference count wait during device reset to prevent deadlock.

Published: 2026-04-24Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31566

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence from amdgpu_ib_schedule(). This fence is used to wait for job completion. Currently, the code drops the fence reference using dma_fence_put() before calling dma_fence_wait(). If dma_fence_put() releases the last reference, the fence may be freed before dma_fence_wait() is called. This can lead to a use-after-free. Fix this by waiting on the fence first and releasing the reference only after dma_fence_wait() completes. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696) (cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482)

Published: 2026-04-24Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31570

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: can: gw: fix OOB heap access in cgw_csum_crc8_rel() cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx(): int from = calc_idx(crc8->from_idx, cf->len); int to = calc_idx(crc8->to_idx, cf->len); int res = calc_idx(crc8->result_idx, cf->len); if (from < 0 || to < 0 || res < 0) return; However, the loop and the result write then use the raw s8 fields directly instead of the computed variables: for (i = crc8->from_idx; ...) /* BUG: raw negative index / cf->data[crc8->result_idx] = ...; / BUG: raw negative index */ With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame, calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with i = -64, reading cf->data[-64], and the write goes to cf->data[-64]. This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the start of the canfd_frame on the heap. The companion function cgw_csum_xor_rel() uses `from`/`to`/`res` correctly throughout; fix cgw_csum_crc8_rel() to match. Confirmed with KASAN on linux-7.0-rc2: BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0 Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62 To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed.

Published: 2026-04-24Modified: 2026-06-17

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31674

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check() Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS. rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[]. Validate addrnr during rule installation so malformed rules are rejected before the match logic can use an out-of-range value.

Published: 2026-04-25Modified: 2026-06-17

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-31678

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: openvswitch: defer tunnel netdev_put to RCU release ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already detached the device. Dropping the netdev reference in destroy can race with concurrent readers that still observe vport->dev. Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let vport_netdev_free() drop the reference from the RCU callback, matching the non-tunnel destroy path and avoiding additional synchronization under RTNL.

Published: 2026-04-25Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31679

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: openvswitch: validate MPLS set/set_masked payload length validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for SET/SET_MASKED actions. In action handling, OVS expects fixed-size MPLS key data (struct ovs_key_mpls). Use the already normalized key_len (masked case included) and reject non-matching MPLS action key sizes. Reject invalid MPLS action payload lengths early.

Published: 2026-04-25Modified: 2026-06-17

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-31680

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: flowlabel: defer exclusive option free until RCU teardown `ip6fl_seq_show()` walks the global flowlabel hash under the seq-file RCU read-side lock and prints `fl->opt->opt_nflen` when an option block is present. Exclusive flowlabels currently free `fl->opt` as soon as `fl->users` drops to zero in `fl_release()`. However, the surrounding `struct ip6_flowlabel` remains visible in the global hash table until later garbage collection removes it and `fl_free_rcu()` finally tears it down. A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that early `kfree()` and dereference freed option state, triggering a crash in `ip6fl_seq_show()`. Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches the lifetime already required for the enclosing flowlabel while readers can still reach it under RCU.

Published: 2026-04-25Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31682

CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: linearize skb before parsing ND options br_nd_send() parses neighbour discovery options from ns->opt[] and assumes that these options are in the linear part of request. Its callers only guarantee that the ICMPv6 header and target address are available, so the option area can still be non-linear. Parsing ns->opt[] in that case can access data past the linear buffer. Linearize request before option parsing and derive ns from the linear network header.

Published: 2026-04-25Modified: 2026-06-17

CVSS 3.xCRITICAL 9.1

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-31695

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for the virt_wifi net devices. However, unregistering a virt_wifi device in netdev_run_todo() can happen together with the device referenced by SET_NETDEV_DEV(). It can result in use-after-free during the ethtool operations performed on a virt_wifi device that is currently being unregistered. Such a net device can have the `dev.parent` field pointing to the freed memory, but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`. Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this: ================================================================== BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0 Read of size 2 at addr ffff88810cfc46f8 by task pm/606 Call Trace: dump_stack_lvl+0x4d/0x70 print_report+0x170/0x4f3 ? pfxraw_spin_lock_irqsave+0x10/0x10 kasan_report+0xda/0x110 ? __pm_runtime_resume+0xe2/0xf0 ? __pm_runtime_resume+0xe2/0xf0 __pm_runtime_resume+0xe2/0xf0 ethnl_ops_begin+0x49/0x270 ethnl_set_features+0x23c/0xab0 ? __pfx_ethnl_set_features+0x10/0x10 ? kvm_sched_clock_read+0x11/0x20 ? local_clock_noinstr+0xf/0xf0 ? local_clock+0x10/0x30 ? kasan_save_track+0x25/0x60 ? __kasan_kmalloc+0x7f/0x90 ? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0 genl_family_rcv_msg_doit+0x1e7/0x2c0 ? __pfx_genl_family_rcv_msg_doit+0x10/0x10 ? __pfx_cred_has_capability.isra.0+0x10/0x10 ? stack_trace_save+0x8e/0xc0 genl_rcv_msg+0x411/0x660 ? __pfx_genl_rcv_msg+0x10/0x10 ? __pfx_ethnl_set_features+0x10/0x10 netlink_rcv_skb+0x121/0x380 ? __pfx_genl_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_down_read+0x10/0x10 genl_rcv+0x23/0x30 netlink_unicast+0x60f/0x830 ? __pfx_netlink_unicast+0x10/0x10 ? pfx_alloc_skb+0x10/0x10 netlink_sendmsg+0x6ea/0xbc0 ? __pfx_netlink_sendmsg+0x10/0x10 ? __futex_queue+0x10b/0x1f0 ____sys_sendmsg+0x7a2/0x950 ? copy_msghdr_from_user+0x26b/0x430 ? pfx___sys_sendmsg+0x10/0x10 ? __pfx_copy_msghdr_from_user+0x10/0x10 ___sys_sendmsg+0xf8/0x180 ? pfx__sys_sendmsg+0x10/0x10 ? __pfx_futex_wait+0x10/0x10 ? fdget+0x2e4/0x4a0 __sys_sendmsg+0x11f/0x1c0 ? pfx_sys_sendmsg+0x10/0x10 do_syscall_64+0xe2/0x570 ? exc_page_fault+0x66/0xb0 entry_SYSCALL_64_after_hwframe+0x77/0x7f This fix may be combined with another one in the ethtool subsystem: https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31720

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31726

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix NULL pointer dereference during unbind race Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") introduced two stages of synchronization waits totaling 1500ms in uvc_function_unbind() to prevent several types of kernel panics. However, this timing-based approach is insufficient during power management (PM) transitions. When the PM subsystem starts freezing user space processes, the wait_event_interruptible_timeout() is aborted early, which allows the unbind thread to proceed and nullify the gadget pointer (cdev->gadget = NULL): [ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind() [ 814.178583][ T3173] PM: suspend entry (deep) [ 814.192487][ T3173] Freezing user space processes [ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release When the PM subsystem resumes or aborts the suspend and tasks are restarted, the V4L2 release path is executed and attempts to access the already nullified gadget pointer, triggering a kernel panic: [ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake [ 814.386727][ T3173] Restarting tasks ... [ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4 [ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94 [ 814.404078][ T4558] Call trace: [ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4 [ 814.404083][ T4558] usb_function_deactivate+0x54/0x94 [ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c [ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac [ 814.404095][ T4558] v4l2_release+0xcc/0x130 Address the race condition and NULL pointer dereference by: 1. State Synchronization (flag + mutex) Introduce a 'func_unbound' flag in struct uvc_device. This allows uvc_function_disconnect() to safely skip accessing the nullified cdev->gadget pointer. As suggested by Alan Stern, this flag is protected by a new mutex (uvc->lock) to ensure proper memory ordering and prevent instruction reordering or speculative loads. This mutex is also used to protect 'func_connected' for consistent state management. 2. Explicit Synchronization (completion) Use a completion to synchronize uvc_function_unbind() with the uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by ensuring struct uvc_device is freed after all video device resources are released.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31737

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31738

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31747

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: comedi: me4000: Fix potential overrun of firmware buffer `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmware loading was totally broken before commit ac584af59945 ("staging: comedi: me4000: fix firmware downloading"), but that is the most sensible target for this fix.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31748

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31749

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31751

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31752

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31754

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP [ 1301.382485] pc : xhci_gen_setup+0xa4/0x408 [ 1301.393391] backtrace: ... xhci_gen_setup+0xa4/0x408 <-- CRASH xhci_plat_setup+0x44/0x58 usb_add_hcd+0x284/0x678 ... cdns_role_set+0x9c/0xbc <-- Role switch Fix by calling cdns_drd_gadget_off() in the error path to properly clean up the DRD gadget state.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31755

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix NULL pointer dereference in ep_queue When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31756

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop() dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro, which expects hsotg->lock to be held since it does spin_unlock/spin_lock around the gadget driver callback invocation. However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating() without holding the lock. This leads to: - spin_unlock on a lock that is not held (undefined behavior) - The lock remaining held after dwc2_gadget_exit_clock_gating() returns, causing a deadlock when spin_lock_irqsave() is called later in the same function. Fix this by acquiring hsotg->lock before calling dwc2_gadget_exit_clock_gating() and releasing it afterwards, which satisfies the locking requirement of the call_gadget() macro.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31758

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31759

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: ulpi: fix double free in ulpi_register_interface() error path When device_register() fails, ulpi_register() calls put_device() on ulpi->dev. The device release callback ulpi_dev_release() drops the OF node reference and frees ulpi, but the current error path in ulpi_register_interface() then calls kfree(ulpi) again, causing a double free. Let put_device() handle the cleanup through ulpi_dev_release() and avoid freeing ulpi again in ulpi_register_interface().

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31761

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Move iio_device_register() to correct location iio_device_register() should be at the end of the probe function to prevent race conditions. Place iio_device_register() at the end of the probe function and place iio_device_unregister() accordingly.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31762

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix irq resource leak The interrupt handler is setup but only a few lines down if iio_trigger_register() fails the function returns without properly releasing the handler. Add cleanup goto to resolve resource leak. Detected by Smatch: drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn: 'irq' from request_threaded_irq() not released on lines: 1124.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31763

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix incorrect free_irq() variable The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq().

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31768

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-adc161s626: use DMA-safe memory for spi_read() Add a DMA-safe buffer and use it for spi_read() instead of a stack memory. All SPI buffers must be DMA-safe. Since we only need up to 3 bytes, we just use a u8[] instead of be16 and be32 and change the conversion functions appropriately.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31770

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) Fix division by zero in occ_show_power_1() In occ_show_power_1() case 1, the accumulator is divided by update_tag without checking for zero. If no samples have been collected yet (e.g. during early boot when the sensor block is included but hasn't been updated), update_tag is zero, causing a kernel divide-by-zero crash. The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by zero issue") only addressed occ_get_powr_avg() used by occ_show_power_2() and occ_show_power_a0(). This separate code path in occ_show_power_1() was missed. Fix this by reusing the existing occ_get_powr_avg() helper, which already handles the zero-sample case and uses mul_u64_u32_div() to multiply before dividing for better precision. Move the helper above occ_show_power_1() so it is visible at the call site. [groeck: Fix alignment problems reported by checkpatch]

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-31773

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31778

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix stack out-of-bounds read in init_card The loop creates a whitespace-stripped copy of the card shortname where `len < sizeof(card->id)` is used for the bounds check. Since sizeof(card->id) is 16 and the local id buffer is also 16 bytes, writing 16 non-space characters fills the entire buffer, overwriting the terminating nullbyte. When this non-null-terminated string is later passed to snd_card_set_id() -> copy_valid_id_string(), the function scans forward with `while (*nid && ...)` and reads past the end of the stack buffer, reading the contents of the stack. A USB device with a product name containing many non-ASCII, non-space characters (e.g. multibyte UTF-8) will reliably trigger this as follows: BUG: KASAN: stack-out-of-bounds in copy_valid_id_string sound/core/init.c:696 [inline] BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c sound/core/init.c:718 The off-by-one has been present since commit bafeee5b1f8d ("ALSA: snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1), which first introduced this whitespace-stripping loop. The original code never accounted for the null terminator when bounding the copy. Fix this by changing the loop bound to `sizeof(card->id) - 1`, ensuring at least one byte remains as the null terminator.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-31779

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler() The memcpy function assumes the dynamic array notif->matches is at least as large as the number of bytes to copy. Otherwise, results->matches may contain unwanted data. To guarantee safety, extend the validation in one of the checks to ensure sufficient packet length. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-31780

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation The variable valuesize is declared as u8 but accumulates the total length of all SSIDs to scan. Each SSID contributes up to 33 bytes (IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10) SSIDs the total can reach 330, which wraps around to 74 when stored in a u8. This causes kmalloc to allocate only 75 bytes while the subsequent memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte heap buffer overflow. Widen valuesize from u8 to u32 to accommodate the full range.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-31781

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43011

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix potential double free of skb When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at line 48 and returns 1 (error). This error propagates back through the call chain: x25_queue_rx_frame returns 1 | v x25_state3_machine receives the return value 1 and takes the else branch at line 278, setting queued=0 and returning 0 | v x25_process_rx_frame returns queued=0 | v x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb) again This would free the same skb twice. Looking at x25_backlog_rcv: net/x25/x25_in.c:x25_backlog_rcv() { ... queued = x25_process_rx_frame(sk, skb); ... if (!queued) kfree_skb(skb); }

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43013

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: lag: Check for LAG device before creating debugfs __mlx5_lag_dev_add_mdev() may return 0 (success) even when an error occurs that is handled gracefully. Consequently, the initialization flow proceeds to call mlx5_ldev_add_debugfs() even when there is no valid LAG context. mlx5_ldev_add_debugfs() blindly created the debugfs directory and attributes. This exposed interfaces (like the members file) that rely on a valid ldev pointer, leading to potential NULL pointer dereferences if accessed when ldev is NULL. Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer before attempting to create the debugfs entries.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43014

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: macb: properly unregister fixed rate clocks The additional resources allocated with clk_register_fixed_rate() need to be released with clk_unregister_fixed_rate(), otherwise they are lost.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43015

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix clk handling on PCI glue driver removal platform_device_unregister() may still want to use the registered clks during runtime resume callback. Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free on rmmod") that addressed the similar problem of clk vs platform device unregistration but just moved the bug to another place. Save the pointers to clks into local variables for reuse after platform device is unregistered. BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60 Read of size 8 at addr ffff888104f85e00 by task modprobe/597 CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x8d/0xba print_report+0x17f/0x496 kasan_report+0xd9/0x180 clk_prepare+0x5a/0x60 macb_runtime_resume+0x13d/0x410 [macb] pm_generic_runtime_resume+0x97/0xd0 __rpm_callback+0xc8/0x4d0 rpm_callback+0xf6/0x230 rpm_resume+0xeeb/0x1a70 __pm_runtime_resume+0xb4/0x170 bus_remove_device+0x2e3/0x4b0 device_del+0x5b3/0xdc0 platform_device_del+0x4e/0x280 platform_device_unregister+0x11/0x50 pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 519: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8e/0x90 __clk_register+0x458/0x2890 clk_hw_register+0x1a/0x60 __clk_hw_register_fixed_rate+0x255/0x410 clk_register_fixed_rate+0x3c/0xa0 macb_probe+0x1d8/0x42e [macb_pci] local_pci_probe+0xd7/0x190 pci_device_probe+0x252/0x600 really_probe+0x255/0x7f0 __driver_probe_device+0x1ee/0x330 driver_probe_device+0x4c/0x1f0 __driver_attach+0x1df/0x4e0 bus_for_each_dev+0x15d/0x1f0 bus_add_driver+0x486/0x5e0 driver_register+0x23a/0x3d0 do_one_initcall+0xfd/0x4d0 do_init_module+0x18b/0x5a0 load_module+0x5663/0x7950 __do_sys_finit_module+0x101/0x180 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 597: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x106/0x180 __kmem_cache_free+0xbc/0x320 clk_unregister+0x6de/0x8d0 macb_remove+0x73/0xc0 [macb_pci] pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43017

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate mesh send advertising payload length mesh_send() currently bounds MGMT_OP_MESH_SEND by total command length, but it never verifies that the bytes supplied for the flexible adv_data[] array actually match the embedded adv_data_len field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a truncated command can still pass the existing 20..50 byte range check and later drive the async mesh send path past the end of the queued command buffer. Keep rejecting zero-length and oversized advertising payloads, but validate adv_data_len explicitly and require the command length to exactly match the flexible array size before queueing the request.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43018

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix potential UAF in hci_le_remote_conn_param_req_evt hci_conn lookup and field access must be covered by hdev lock in hci_le_remote_conn_param_req_evt, otherwise it's possible it is freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43020

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate LTK enc_size on load Load Long Term Keys stores the user-provided enc_size and later uses it to size fixed-size stack operations when replying to LE LTK requests. An enc_size larger than the 16-byte key buffer can therefore overflow the reply stack buffer. Reject oversized enc_size values while validating the management LTK record so invalid keys never reach the stored key state.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43023

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: fix race conditions in sco_sock_connect() sco_sock_connect() checks sk_state and sk_type without holding the socket lock. Two concurrent connect() syscalls on the same socket can both pass the check and enter sco_connect(), leading to use-after-free. The buggy scenario involves three participants and was confirmed with additional logging instrumentation: Thread A (connect): HCI disconnect: Thread B (connect): sco_sock_connect(sk) sco_sock_connect(sk) sk_state==BT_OPEN sk_state==BT_OPEN (pass, no lock) (pass, no lock) sco_connect(sk): sco_connect(sk): hci_dev_lock hci_dev_lock hci_connect_sco <- blocked -> hcon1 sco_conn_add->conn1 lock_sock(sk) sco_chan_add: conn1->sk = sk sk->conn = conn1 sk_state=BT_CONNECT release_sock hci_dev_unlock hci_dev_lock sco_conn_del: lock_sock(sk) sco_chan_del: sk->conn=NULL conn1->sk=NULL sk_state= BT_CLOSED SOCK_ZAPPED release_sock hci_dev_unlock (unblocked) hci_connect_sco -> hcon2 sco_conn_add -> conn2 lock_sock(sk) sco_chan_add: sk->conn=conn2 sk_state= BT_CONNECT // zombie sk! release_sock hci_dev_unlock Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to BT_CONNECT. Subsequent cleanup triggers double sock_put() and use-after-free. Meanwhile conn1 is leaked as it was orphaned when sco_conn_del() cleared the association. Fix this by: - Moving lock_sock() before the sk_state/sk_type checks in sco_sock_connect() to serialize concurrent connect attempts - Fixing the sk_type != SOCK_SEQPACKET check to actually return the error instead of just assigning it - Adding a state re-check in sco_connect() after lock_sock() to catch state changes during the window between the locks - Adding sco_pi(sk)->conn check in sco_chan_add() to prevent double-attach of a socket to multiple connections - Adding hci_conn_drop() on sco_chan_add failure to prevent HCI connection leaks

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43024

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43025

HIGH7.3

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ignore explicit helper on new expectations Use the existing master conntrack helper, anything else is not really supported and it just makes validation more complicated, so just ignore what helper userspace suggests for this expectation. This was uncovered when validating CTA_EXPECT_CLASS via different helper provided by userspace than the existing master conntrack helper: BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0 Read of size 4 at addr ffff8880043fe408 by task poc/102 Call Trace: nf_ct_expect_related_report+0x2479/0x27c0 ctnetlink_create_expect+0x22b/0x3b0 ctnetlink_new_expect+0x4bd/0x5c0 nfnetlink_rcv_msg+0x67a/0x950 netlink_rcv_skb+0x120/0x350 Allowing to read kernel memory bytes off the expectation boundary. CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace via netlink dump.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.3

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:H

References

CVE-2026-43026

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_proto and dir in the else branch, guarded by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when NAT is enabled. Confirmed by priming the expect slab with NAT-bearing expectations, freeing them, creating a new expectation without CTA_EXPECT_NAT, and observing that the ctnetlink dump emits a spurious CTA_EXPECT_NAT containing stale data from the prior allocation.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43027

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free. Pass the actual helper pointer so expectations referencing it are properly destroyed before the helper object is freed. BUG: KASAN: slab-use-after-free in string+0x38f/0x430 Read of size 1 at addr ffff888003b14d20 by task poc/103 Call Trace: string+0x38f/0x430 vsnprintf+0x3cc/0x1170 seq_printf+0x17a/0x240 exp_seq_show+0x2e5/0x560 seq_read_iter+0x419/0x1280 proc_reg_read+0x1ac/0x270 vfs_read+0x179/0x930 ksys_read+0xef/0x1c0 Freed by task 103: The buggy address is located 32 bytes inside of freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43028

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43030

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43032

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: NFC: pn533: bound the UART receive buffer pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43035

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43037

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5).

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43038

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43040

HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.1

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43041

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak __radix_tree_create() allocates and links intermediate nodes into the tree one by one. If a subsequent allocation fails, the already-linked nodes remain in the tree with no corresponding leaf entry. These orphaned internal nodes are never reclaimed because radix_tree_for_each_slot() only visits slots containing leaf values. The radix_tree API is deprecated in favor of xarray. As suggested by Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead of fixing the radix_tree itself [1]. xarray properly handles cleanup of internal nodes — xa_destroy() frees all internal xarray nodes when the qrtr_node is released, preventing the leak. [1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43043

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end of the previous SGL when performing sg_chain() in af_alg_alloc_tsgl().

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43046

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2 RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545 Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000 Call Trace: merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861 btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195 btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130 open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640 btrfs_fill_super fs/btrfs/super.c:987 [inline] btrfs_get_tree_super fs/btrfs/super.c:1951 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline] btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... RIP: 0033:0x7f969c9a8fde Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f ---[ end trace 0000000000000000 ]--- The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic metadata fuzzing tool that corrupts btrfs metadata at runtime. [CAUSE] A non-zero drop_progress.objectid means an interrupted btrfs_drop_snapshot() left a resume point on disk, and in that case drop_level must be greater than 0 because the checkpoint is only saved at internal node levels. Although this invariant is enforced when the kernel writes the root item, it is not validated when the root item is read back from disk. That allows on-disk corruption to provide an invalid state with drop_progress.objectid != 0 and drop_level == 0. When relocation recovery later processes such a root item, merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The same invalid metadata can also trigger the corresponding BUG_ON() in btrfs_drop_snapshot(). [FIX] Fix this by validating the root_item invariant in tree-checker when reading root items from disk: if drop_progress.objectid is non-zero, drop_level must also be non-zero. Reject such malformed metadata with -EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot() and triggers the BUG_ON. After the fix, the same corruption is correctly rejected by tree-checker and the BUG_ON is no longer triggered.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43047

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43050

HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converting priv->lecd to an RCU-protected pointer: - Mark priv->lecd as __rcu in lec.h - Use rcu_assign_pointer() in lec_atm_close() and lecd_attach() for safe pointer assignment - Use rcu_access_pointer() for NULL checks that do not dereference the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and lecd_attach() - Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(), lec_handle_bridge() and lec_atm_send() to safely access lecd - Use rcu_assign_pointer() followed by synchronize_rcu() in lec_atm_close() to ensure all readers have completed before proceeding. This is safe since lec_atm_close() is called from vcc_release() which holds lock_sock(), a sleeping lock. - Remove the manual sk_receive_queue drain from lec_atm_close() since vcc_destroy_socket() already drains it after lec_atm_close() returns. v2: Switch from spinlock + sock_hold/put approach to RCU to properly fix the race. The v1 spinlock approach had two issues pointed out by Eric Dumazet: 1. priv->lecd was still accessed directly after releasing the lock instead of using a local copy. 2. The spinlock did not prevent packets being queued after lec_atm_close() drains sk_receive_queue since timer and workqueue paths bypass netif_stop_queue(). Note: Syzbot patch testing was attempted but the test VM terminated unexpectedly with "Connection to localhost closed by remote host", likely due to a QEMU AHCI emulation issue unrelated to this fix. Compile testing with "make W=1 net/atm/lec.o" passes cleanly.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.0

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43051

HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 8.1

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

References

CVE-2026-43054

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Drain commands in target_reset handler tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS without draining any in-flight commands. The SCSI EH documentation (scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver has made lower layers "forget about timed out scmds" and is ready for new commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug, mpi3mr) enforces this by draining or completing outstanding commands before returning SUCCESS. Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight scsi_cmnd structures for recovery commands (e.g. TUR) while the target core still has async completion work queued for the old se_cmd. The memset in queuecommand zeroes se_lun and lun_ref_active, causing transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN reference prevents transport_clear_lun_ref() from completing, hanging configfs LUN unlink forever in D-state: INFO: task rm:264 blocked for more than 122 seconds. rm D 0 264 258 0x00004000 Call Trace: __schedule+0x3d0/0x8e0 schedule+0x36/0xf0 transport_clear_lun_ref+0x78/0x90 [target_core_mod] core_tpg_remove_lun+0x28/0xb0 [target_core_mod] target_fabric_port_unlink+0x50/0x60 [target_core_mod] configfs_unlink+0x156/0x1f0 [configfs] vfs_unlink+0x109/0x290 do_unlinkat+0x1d5/0x2d0 Fix this by making tcm_loop_target_reset() actually drain commands: 1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that the target core knows about (those not yet CMD_T_COMPLETE). 2. Use blk_mq_tagset_busy_iter() to iterate all started requests and flush_work() on each se_cmd — this drains any deferred completion work for commands that already had CMD_T_COMPLETE set before the TMR (which the TMR skips via __target_check_io_state()). This is the same pattern used by mpi3mr, scsi_debug, and libsas to drain outstanding commands during reset.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43057

HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback NETIF_F_IPV6_CSUM only advertises support for checksum offload of packets without IPv6 extension headers. Packets with extension headers must fall back onto software checksumming. Since TSO depends on checksum offload, those must revert to GSO. The below commit introduces that fallback. It always checks network header length. For tunneled packets, the inner header length must be checked instead. Extend the check accordingly. A special case is tunneled packets without inner IP protocol. Such as RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by transport header either, so also must revert to the software GSO path.

Published: 2026-05-01Modified: 2026-06-17

CVSS 3.xHIGH 7.5

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43064

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix not releasing workqueue on .release() The workqueue associated with an DSA/IAA device is not released when the object is freed.

Published: 2026-05-05Modified: 2026-06-19

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43065

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: always drain queued discard work in ext4_mb_release() While reviewing recent ext4 patch[1], Sashiko raised the following concern[2]: > If the filesystem is initially mounted with the discard option, > deleting files will populate sbi->s_discard_list and queue > s_discard_work. If it is then remounted with nodiscard, the > EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is > neither cancelled nor flushed. [1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/ [2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev The concern was valid, but it had nothing to do with the patch[1]. One of the problems with Sashiko in its current (early) form is that it will detect pre-existing issues and report it as a problem with the patch that it is reviewing. In practice, it would be hard to hit deliberately (unless you are a malicious syzkaller fuzzer), since it would involve mounting the file system with -o discard, and then deleting a large number of files, remounting the file system with -o nodiscard, and then immediately unmounting the file system before the queued discard work has a change to drain on its own. Fix it because it's a real bug, and to avoid Sashiko from raising this concern when analyzing future patches to mballoc.c.

Published: 2026-05-05Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43066

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0.

Published: 2026-05-05Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43067

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mapped blocks Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups().

Published: 2026-05-05Modified: 2026-06-17

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43068

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): error count since last fsck: 1 EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760 EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760 ... According to the log analysis, blocks are always requested from the corrupted block group. This may happen as follows: ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return error ext4_lock_group(ac->ac_sb, group); if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable goto out; After commit 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group as corrupt on block bitmap error") is no real solution for allocating blocks from corrupted block groups. This is because if 'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then 'ext4_mb_load_buddy()' may return an error. This means that the block allocation will fail. Therefore, check block group if corrupted when ext4_mb_load_buddy() returns error.

Published: 2026-05-05Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43069

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid.

Published: 2026-05-05Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43324

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix interrupt synchronization error This fixes an error in synchronization in the dummy-hcd driver. The error has a somewhat involved history. The synchronization mechanism was introduced by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), which added an emulated "interrupts enabled" flag together with code emulating synchronize_irq() (it waits until all current handler callbacks have returned). But the emulated interrupt-disable occurred too late, after the driver containing the handler callback routines had been told that it was unbound and no more callbacks would occur. Commit 4a5d797a9f9c ("usb: gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this by moving the synchronize_irq() emulation code from dummy_stop() to dummy_pullup(), which runs before the unbind callback. There still were races, though, because the emulated interrupt-disable still occurred too late. It couldn't be moved to dummy_pullup(), because that routine can be called for reasons other than an impending unbind. Therefore commits 7dc0c55e9f30 ("USB: UDC core: Add udc_async_callbacks gadget op") and 04145a03db9d ("USB: UDC: Implement udc_async_callbacks in dummy-hcd") added an API allowing the UDC core to tell dummy-hcd exactly when emulated interrupts and their callbacks should be disabled. That brings us to the current state of things, which is still wrong because the emulated synchronize_irq() occurs before the emulated interrupt-disable! That's no good, beause it means that more emulated interrupts can occur after the synchronize_irq() emulation has run, leading to the possibility that a callback handler may be running when the gadget driver is unbound. To fix this, we have to move the synchronize_irq() emulation code yet again, to the dummy_udc_async_callbacks() routine, which takes care of enabling and disabling emulated interrupt requests. The synchronization will now run immediately after emulated interrupts are disabled, which is where it belongs.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43327

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43328

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release().

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43329

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43333

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: reject direct access to nullable PTR_TO_BUF pointers check_mem_access() matches PTR_TO_BUF via base_type() which strips PTR_MAYBE_NULL, allowing direct dereference without a null check. Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL. On stop callbacks these are NULL, causing a kernel NULL dereference. Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the existing PTR_TO_BTF_ID pattern.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43334

HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xHIGH 8.8

CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43339

HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UaF in addrconf_permanent_addr() The mentioned helper try to warn the user about an exceptional condition, but the message is delivered too late, accessing the ipv6 after its possible deletion. Reorder the statement to avoid the possible UaF; while at it, place the warning outside the idev->lock as it needs no protection.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xHIGH 7.8

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43340

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: comedi: Reinit dev->spinlock between attachments to low-level drivers `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can be attached to different low-level drivers over their lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in inconsistent lock states being reported when there is a mismatch in the spin-lock locking levels used by each low-level driver to which the COMEDI device has been attached. Fix it by reinitializing `dev->spinlock` before calling the low-level driver's `attach` function pointer if `CONFIG_LOCKDEP` is enabled.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43341

CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length.

Published: 2026-05-08Modified: 2026-06-19

CVSS 3.xCRITICAL 9.8

CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

References

CVE-2026-43342

MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xMEDIUM 4.7

CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

References

CVE-2026-43343

MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup.

Published: 2026-05-08Modified: 2026-06-17

CVSS 3.xMEDIUM 5.5

CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

References

Package update kernel-image-un-def in branch p10

Closed issues (157)

Уязвимость модуля fs/btrfs/inode.c ядра операционной системы Linux, позволяющая нарушителю получить доступ на чтение и изменение данных

Уязвимость функции tc_chain_fill_node() ядра операционных систем Linux, позволяющая нарушителю получить несанкционированный доступ к конфиденциальной информации

Уязвимость функции pn532_receive_buf() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ctnetlink_alloc_expect() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию

Уязвимость функции hci_cmd_sync_queue_once() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции nft_queue() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции regsafe() ядра операционных систем Linux, позволяющая нарушителю раскрыть конфиденциальную информацию или вызвать отказ в обслуживании

Уязвимость функции hci_le_remote_conn_param_req_evt() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость модуля net/bluetooth/mgmt.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость модуля drivers/net/ethernet/cadence/macb_pci.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip4ip6_err() модуля net/ipv6/ip6_tunnel.c ядра операционной системы Linux, позволяющая нарушителю выполнить произвольный код

Уязвимость модуля net/bluetooth/mgmt.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции sock_def_readable() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции sco_sock_connect() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix overflow when accumulating packets Add a check to ensure that `x25_sock.fraglen` does not overflow. The `fraglen` also needs to be resetted when purging `fragment_queue` in `x25_clear_queues()`.

In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc").

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix incorrect free_irq() variable The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq().

In the Linux kernel, the following vulnerability has been resolved: net: macb: properly unregister fixed rate clocks The additional resources allocated with clk_register_fixed_rate() need to be released with clk_unregister_fixed_rate(), otherwise they are lost.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix not releasing workqueue on .release() The workqueue associated with an DSA/IAA device is not released when the object is freed.