All errata/p11/ALT-PU-2026-4865-25
ALT-PU-2026-4865-25

Package update kernel-image-6.18 in branch p11

Version6.18.19-alt1
Task#412097
Published2026-06-19
Max severityCRITICAL
Severity:

Closed issues (748)

BDU:2026-03447
MEDIUM5.5

Уязвимость модуля io_uring/zcrx.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-22
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03448
MEDIUM5.5

Уязвимость модуля drivers/nvme/host/fc.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-22
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03449
MEDIUM5.5

Уязвимость модуля drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-22
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03450
MEDIUM5.5

Уязвимость функции setup_nic_devices() модуля drivers/net/ethernet/cavium/liquidio/lio_main.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-22
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03451
MEDIUM5.5

Уязвимость функции setup_nic_devices() модуля drivers/net/ethernet/cavium/liquidio/lio_main.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-22
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03485
MEDIUM5.5

Уязвимость функции xchk_scrub_create_subord() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-23Modified: 2026-05-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03486
MEDIUM5.5

Уязвимость функции xchk_xfile_*_descr() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-23Modified: 2026-05-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03487
MEDIUM5.5

Уязвимость функции xfarray_destroy() и xfblob_destroy() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-23Modified: 2026-05-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03560
MEDIUM5.5

Уязвимость модулей drivers/net/ethernet/google/gve/gve_ethtool.c и drivers/net/ethernet/google/gve/gve_main.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-24Modified: 2026-03-29
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03570
MEDIUM5.5

Уязвимость функции nv3_arb() модуля drivers/video/fbdev/riva/riva_hw.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-24Modified: 2026-05-26
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-03582
MEDIUM5.5

Уязвимость функции xrep_revalidate_allocbt() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-24Modified: 2026-05-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04158
MEDIUM5.5

Уязвимость модуля fs/f2fs/node.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29Modified: 2026-04-02
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04160
MEDIUM5.5

Уязвимость функции mas_store_gfp() модуля drivers/base/regmap/regcache-maple.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04162
MEDIUM5.5

Уязвимость функции udp4_gro_complete() модуля net/core/gro.c ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации или вызвать отказ в обслуживании

Published: 2026-03-29
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04163
MEDIUM5.5

Уязвимость функции io_rw_recycle() модуля io_uring/rw.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04164
MEDIUM4.7

Уязвимость функции ptype_seq_next() и ptype_seq_show() модуля net/core/net-procfs.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29Modified: 2026-05-14
CVSS 3.xMEDIUM 4.7
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0LOW 3.8
CVSS:2.0/AV:L/AC:H/Au:S/C:N/I:N/A:C
References
BDU:2026-04165
MEDIUM5.5

Уязвимость функции f2fs_write_end_io() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04166
MEDIUM5.5

Уязвимость модуля arch/loongarch/kernel/traps.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04167
MEDIUM6.2

Уязвимость функции dvb_ringbuffer_init() модуля drivers/media/dvb-core/dmxdev.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-29Modified: 2026-05-26
CVSS 3.xMEDIUM 6.2
CVSS:3.x/AV:L/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H
CVSS 2.0MEDIUM 5.2
CVSS:2.0/AV:L/AC:H/Au:N/C:P/I:P/A:C
References
BDU:2026-04243
MEDIUM5.5

Уязвимость модуля fs/btrfs/inode.c ядра операционной системы Linux, позволяющая нарушителю получить доступ на чтение и изменение данных

Published: 2026-03-30Modified: 2026-05-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04244
LOW3.3

Уязвимость функции __cow_file_range_inline() модуля fs/btrfs/inode.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-30
CVSS 3.xLOW 3.3
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L
CVSS 2.0LOW 1.7
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:P
References
BDU:2026-04311
MEDIUM5.5

Уязвимость модуля net/netfilter/nf_tables_api.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-03-31Modified: 2026-05-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L
CVSS 2.0MEDIUM 5.2
CVSS:2.0/AV:A/AC:L/Au:S/C:P/I:P/A:P
References
BDU:2026-04642
MEDIUM5.5

Уязвимость функций perf mmap() и perf mmap close() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-05
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04643
MEDIUM5.5

Уязвимость функции secure_seq() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-05
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04644
MEDIUM5.5

Уязвимость компонента ntfs3 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-05Modified: 2026-05-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-04645
MEDIUM5.5

Уязвимость функции act_gate() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-05Modified: 2026-05-26
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-05019
MEDIUM5.5

Уязвимость функции sigd_send() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-04-12Modified: 2026-05-26
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-06430
HIGH7.8

Уязвимость функции espintcp_close() ядра операционной системы Linux, позволяющая нарушителю выполнить произвольный код

Published: 2026-05-07Modified: 2026-05-14
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-06704
MEDIUM6.5

Уязвимость компонента authenc ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-12Modified: 2026-05-26
CVSS 3.xMEDIUM 6.5
CVSS:3.x/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 6.1
CVSS:2.0/AV:A/AC:L/Au:N/C:N/I:N/A:C
References
BDU:2026-06705
HIGH7.0

Уязвимость компонента sch_teql ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-12Modified: 2026-05-26
CVSS 3.xHIGH 7.0
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.0
CVSS:2.0/AV:L/AC:H/Au:S/C:C/I:C/A:C
References
BDU:2026-07605
HIGH7.8

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-31Modified: 2026-06-18
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-07606
HIGH7.8

Уязвимость функции verify_dfa() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-31Modified: 2026-06-18
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-07607
MEDIUM6.3

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю оказать воздействие на целостность и доступность защищаемой информации

Published: 2026-05-31Modified: 2026-06-18
CVSS 3.xMEDIUM 6.3
CVSS:3.x/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H
CVSS 2.0MEDIUM 5.5
CVSS:2.0/AV:L/AC:H/Au:S/C:N/I:C/A:C
References
BDU:2026-07608
HIGH7.8

Уязвимость модуля безопасности ядра AppArmor операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-05-31Modified: 2026-06-18
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-07881
MEDIUM6.6

Уязвимость компонента apparmor ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-07Modified: 2026-06-18
CVSS 3.xMEDIUM 6.6
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H
CVSS 2.0MEDIUM 5.7
CVSS:2.0/AV:L/AC:L/Au:S/C:P/I:P/A:C
References
BDU:2026-07882
MEDIUM5.5

Уязвимость компонента apparmor ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-07Modified: 2026-06-18
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-07883
HIGH7.8

Уязвимость функции match_char ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Published: 2026-06-07Modified: 2026-06-18
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-07884
MEDIUM5.5

Уязвимость компонента apparmor ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-07Modified: 2026-06-18
CVSS 3.xMEDIUM 5.5
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0MEDIUM 4.6
CVSS:2.0/AV:L/AC:L/Au:S/C:N/I:N/A:C
References
BDU:2026-07885
HIGH7.8

Уязвимость функции aa_replace_profiles ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Published: 2026-06-07Modified: 2026-06-18
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-08031
HIGH7.8

Уязвимость функции nft_map_catchall_activate() компонента nf_tables ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-09Modified: 2026-06-18
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-08413
HIGH8.2

Уязвимость функции mlx5e_reset_txqsq_cc_pc() драйвера mlx5e ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-16
CVSS 3.xHIGH 8.2
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H
CVSS 2.0HIGH 8.5
CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:P/A:C
References
BDU:2026-08414
HIGH7.8

Уязвимость функции bond_setup_by_slave() компонента bonding driver ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-16
CVSS 3.xHIGH 7.8
CVSS:3.x/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 2.0MEDIUM 6.8
CVSS:2.0/AV:L/AC:L/Au:S/C:C/I:C/A:C
References
BDU:2026-08416
HIGH7.5

Уязвимость функции tcp_write_xmit() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Published: 2026-06-16
CVSS 3.xHIGH 7.5
CVSS:3.x/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
CVSS 2.0HIGH 7.8
CVSS:2.0/AV:N/AC:L/Au:N/C:N/I:N/A:C
References
CVE-2025-71200
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes. Add a check to prevent illegal clock reduction through debugfs: root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock root@debian:/# [ 30.090146] mmc0: running CQE recovery mmc0: cqhci: Failed to halt mmc0: cqhci: spurious TCN for tag 0 WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24 Modules linked in: CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cqhci_irq+0x254/0x818 lr : cqhci_irq+0x254/0x818 ...

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71203
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: riscv: Sanitize syscall table indexing under speculation The syscall number is a user-controlled value used to index into the syscall table. Use array_index_nospec() to clamp this value after the bounds check to prevent speculative out-of-bounds access and subsequent data leakage via cache side channels.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2025-71204
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix refcount leak in parse_durable_handle_context() When the command is a replay operation and -ENOEXEC is returned, the refcount of ksmbd_file must be released.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71220
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: smb/server: call ksmbd_session_rpc_close() on error path in create_smb2_pipe() When ksmbd_iov_pin_rsp() fails, we should call ksmbd_session_rpc_close().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2025-71221
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue() Add proper locking in mmp_pdma_residue() to prevent use-after-free when accessing descriptor list and descriptor contents. The race occurs when multiple threads call tx_status() while the tasklet on another CPU is freeing completed descriptors: CPU 0 CPU 1 ----- ----- mmp_pdma_tx_status() mmp_pdma_residue() -> NO LOCK held list_for_each_entry(sw, ..) DMA interrupt dma_do_tasklet() -> spin_lock(&desc_lock) list_move(sw->node, ...) spin_unlock(&desc_lock) | dma_pool_free(sw) <- FREED! -> access sw->desc <- UAF! This issue can be reproduced when running dmatest on the same channel with multiple threads (threads_per_chan > 1). Fix by protecting the chain_running list iteration and descriptor access with the chan->desc_lock spinlock.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2025-71222
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: ensure skb headroom before skb_push This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is less than needed (typically 110 - 94 = 16 bytes).

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71223
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix refcount leak in smb2_open() When ksmbd_vfs_getattr() fails, the reference count of ksmbd_file must be released.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71225
MEDIUM5.3

In the Linux kernel, the following vulnerability has been resolved: md: suspend array while updating raid_disks via sysfs In raid1_reshape(), freeze_array() is called before modifying the r1bio memory pool (conf->r1bio_pool) and conf->raid_disks, and unfreeze_array() is called after the update is completed. However, freeze_array() only waits until nr_sync_pending and (nr_pending - nr_queued) of all buckets reaches zero. When an I/O error occurs, nr_queued is increased and the corresponding r1bio is queued to either retry_list or bio_end_io_list. As a result, freeze_array() may unblock before these r1bios are released. This can lead to a situation where conf->raid_disks and the mempool have already been updated while queued r1bios, allocated with the old raid_disks value, are later released. Consequently, free_r1bio() may access memory out of bounds in put_all_bios() and release r1bios of the wrong size to the new mempool, potentially causing issues with the mempool as well. Since only normal I/O might increase nr_queued while an I/O error occurs, suspending the array avoids this issue. Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends the array. Therefore, we suspend the array when updating raid_disks via sysfs to avoid this issue too.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.3
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:H
References
CVE-2025-71227
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't WARN for connections on invalid channels It's not clear (to me) how exactly syzbot managed to hit this, but it seems conceivable that e.g. regulatory changed and has disabled a channel between scanning (channel is checked to be usable by cfg80211_get_ies_channel_number) and connecting on the channel later. With one scenario that isn't covered elsewhere described above, the warning isn't good, replace it with a (more informative) error message.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71229
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon() rtw_core_enable_beacon() reads 4 bytes from an address that is not a multiple of 4. This results in a crash on some systems. Do 1 byte reads/writes instead. Unable to handle kernel paging request at virtual address ffff8000827e0522 Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000 [ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13 Internal error: Oops: 0000000096000021 [#1] SMP Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...] CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY Tainted: [W]=WARN Hardware name: FriendlyElec NanoPC-T6 LTS (DT) Workqueue: phy0 rtw_c2h_work [rtw88_core] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : rtw_pci_read32+0x18/0x40 [rtw88_pci] lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core] sp : ffff800080cc3ca0 x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828 x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00 x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001 x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522 Call trace: rtw_pci_read32+0x18/0x40 [rtw88_pci] (P) rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core] rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core] rtw_c2h_work+0x50/0x98 [rtw88_core] process_one_work+0x178/0x3f8 worker_thread+0x208/0x418 kthread+0x120/0x220 ret_from_fork+0x10/0x20 Code: d28fe202 8b020000 f9524400 8b214000 (b9400000) ---[ end trace 0000000000000000 ]---

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71230
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hfs: ensure sb->s_fs_info is always cleaned up When hfs was converted to the new mount api a bug was introduced by changing the allocation pattern of sb->s_fs_info. If setup_bdev_super() fails after a new superblock has been allocated by sget_fc(), but before hfs_fill_super() takes ownership of the filesystem-specific s_fs_info data it was leaked. Fix this by freeing sb->s_fs_info in hfs_kill_super().

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71231
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode The local variable 'i' is initialized with -EINVAL, but the for loop immediately overwrites it and -EINVAL is never returned. If no empty compression mode can be found, the function would return the out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid array access in add_iaa_compression_mode(). Fix both issues by returning either a valid index or -EINVAL.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2025-71232
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Free sp in error path to fix system crash System crash seen during load/unload test in a loop, [61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X. [61110.467494] ============================================================================= [61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown() [61110.467501] ----------------------------------------------------------------------------- [61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467515] Call Trace: [61110.467516] [61110.467519] dump_stack_lvl+0x34/0x48 [61110.467526] slab_err.cold+0x53/0x67 [61110.467534] __kmem_cache_shutdown+0x16e/0x320 [61110.467540] kmem_cache_destroy+0x51/0x160 [61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280 [61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [61110.467616] ? do_syscall_64+0x5c/0x90 [61110.467619] ? exc_page_fault+0x62/0x150 [61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [61110.467626] [61110.467627] Disabling lock debugging due to kernel taint [61110.467635] Object 0x0000000026f7e6e6 @offset=16000 [61110.467639] ------------[ cut here ]------------ [61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160 [61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160 [61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 [61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282 [61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027 [61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0 [61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7 [61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000 [61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000 [61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0 [61110.467736] PKRU: 55555554 [61110.467737] Call Trace: [61110.467738] [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280 Free sp in the error path to fix the crash.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71233
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Avoid creating sub-groups asynchronously The asynchronous creation of sub-groups by a delayed work could lead to a NULL pointer dereference when the driver directory is removed before the work completes. The crash can be easily reproduced with the following commands: # cd /sys/kernel/config/pci_ep/functions/pci_epf_test # for i in {1..20}; do mkdir test && rmdir test; done BUG: kernel NULL pointer dereference, address: 0000000000000088 ... Call Trace: configfs_register_group+0x3d/0x190 pci_epf_cfs_work+0x41/0x110 process_one_work+0x18f/0x350 worker_thread+0x25a/0x3a0 Fix this issue by using configfs_add_default_group() API which does not have the deadlock problem as configfs_register_group() and does not require the delayed work handler. [mani: slightly reworded the description and added stable list]

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71234
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2025-71235
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Delay module unload while fabric scan in progress System crash seen during load/unload test in a loop. [105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086 [105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0 [105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000 [105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000 [105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0 [105954.384928] PKRU: 55555554 [105954.384929] Call Trace: [105954.384931] [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx] [105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx] [105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx] [105954.384999] ? __wake_up_common+0x80/0x190 [105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx] [105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx] [105954.385040] ? __handle_irq_event_percpu+0x3d/0x190 [105954.385044] ? handle_irq_event+0x58/0xb0 [105954.385046] ? handle_edge_irq+0x93/0x240 [105954.385050] ? __common_interrupt+0x41/0xa0 [105954.385055] ? common_interrupt+0x3e/0xa0 [105954.385060] ? asm_common_interrupt+0x22/0x40 The root cause of this was that there was a free (dma_free_attrs) in the interrupt context. There was a device discovery/fabric scan in progress. A module unload was issued which set the UNLOADING flag. As part of the discovery, after receiving an interrupt a work queue was scheduled (which involved a work to be queued). Since the UNLOADING flag is set, the work item was not allocated and the mapped memory had to be freed. The free occurred in interrupt context leading to system crash. Delay the driver unload until the fabric scan is complete to avoid the crash.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71236
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate sp before freeing associated memory System crash with the following signature [154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete [154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3. [154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5. [154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000. [154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000. [154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [154565.553080] #PF: supervisor read access in kernel mode [154565.553082] #PF: error_code(0x0000) - not-present page [154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0 [154565.553089] Oops: 0000 1 PREEMPT SMP PTI [154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1 [154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024 [154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b [154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286 [154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002 [154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47 [154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a [154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0 [154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000 [154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000 [154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0 [154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [154565.553159] PKRU: 55555554 [154565.553160] Call Trace: [154565.553162] [154565.553165] ? show_trace_log_lvl+0x1c4/0x2df [154565.553172] ? show_trace_log_lvl+0x1c4/0x2df [154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553215] ? __die_body.cold+0x8/0xd [154565.553218] ? page_fault_oops+0x134/0x170 [154565.553223] ? snprintf+0x49/0x70 [154565.553229] ? exc_page_fault+0x62/0x150 [154565.553238] ? asm_exc_page_fault+0x22/0x30 Check for sp being non NULL before freeing any associated memory

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71237
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nilfs2: Fix potential block overflow that cause system hang When a user executes the FITRIM command, an underflow can occur when calculating nblocks if end_block is too small. Since nblocks is of type sector_t, which is u64, a negative nblocks value will become a very large positive integer. This ultimately leads to the block layer function __blkdev_issue_discard() taking an excessively long time to process the bio chain, and the ns_segctor_sem lock remains held for a long period. This prevents other tasks from acquiring the ns_segctor_sem lock, resulting in the hang reported by syzbot in [1]. If the ending block is too small, typically if it is smaller than 4KiB range, depending on the usage of the segment 0, it may be possible to attempt a discard request beyond the device size causing the hang. Exiting successfully and assign the discarded size (0 in this case) to range->len. Although the start and len values in the user input range are too small, a conservative strategy is adopted here to safely ignore them, which is equivalent to a no-op; it will not perform any trimming and will not throw an error. [1] task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000 Call Trace: rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272 nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline] nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684 [ryusuke: corrected part of the commit message about the consequences]

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71238
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix bsg_done() causing double free Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done().

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2025-71239
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: audit: add fchmodat2() to change attributes class fchmodat2(), introduced in version 6.6 is currently not in the change attribute class of audit. Calling fchmodat2() to change a file attribute in the same fashion than chmod() or fchmodat() will bypass audit rules such as: -w /tmp/test -p rwa -k test_rwa The current patch adds fchmodat2() to the change attributes class.

Published: 2026-03-17Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71265
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata We found an infinite loop bug in the ntfs3 file system that can lead to a Denial-of-Service (DoS) condition. A malformed NTFS image can cause an infinite loop when an attribute header indicates an empty run list, while directory entries reference it as containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way to represent an empty run list, and run_unpack() correctly handles this by checking if evcn + 1 equals svcn and returning early without parsing any run data. However, this creates a problem when there is metadata inconsistency, where the attribute header claims to be empty (evcn=-1) but the caller expects to read actual data. When run_unpack() immediately returns success upon seeing this condition, it leaves the runs_tree uninitialized with run->runs as a NULL. The calling function attr_load_runs_range() assumes that a successful return means that the runs were loaded and sets clen to 0, expecting the next run_lookup_entry() call to succeed. Because runs_tree remains uninitialized, run_lookup_entry() continues to fail, and the loop increments vcn by zero (vcn += 0), leading to an infinite loop. This patch adds a retry counter to detect when run_lookup_entry() fails consecutively after attr_load_runs_vcn(). If the run is still not found on the second attempt, it indicates corrupted metadata and returns -EINVAL, preventing the Denial-of-Service (DoS) vulnerability.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71266
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: check return value of indx_find to avoid infinite loop We found an infinite loop bug in the ntfs3 file system that can lead to a Denial-of-Service (DoS) condition. A malformed dentry in the ntfs3 filesystem can cause the kernel to hang during the lookup operations. By setting the HAS_SUB_NODE flag in an INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the VCN pointer, an attacker can cause the indx_find() function to repeatedly read the same block, allocating 4 KB of memory each time. The kernel lacks VCN loop detection and depth limits, causing memory exhaustion and an OOM crash. This patch adds a return value check for fnd_push() to prevent a memory exhaustion vulnerability caused by infinite loops. When the index exceeds the size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find() function checks this return value and stops processing, preventing further memory allocation.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71267
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST We found an infinite loop bug in the ntfs3 file system that can lead to a Denial-of-Service (DoS) condition. A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute indicates a zero data size while the driver allocates memory for it. When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set to zero, it still allocates memory because of al_aligned(0). This creates an inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute list exists and enumerates only the primary MFT record. When it finds ATTR_LIST, the code reloads it and restarts the enumeration, repeating indefinitely. The mount operation never completes, hanging the kernel thread. This patch adds validation to ensure that data_size is non-zero before memory allocation. When a zero-sized ATTR_LIST is detected, the function returns -EINVAL, preventing a DoS vulnerability.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71268
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reservation leak in some error paths when inserting inline extent If we fail to allocate a path or join a transaction, we return from __cow_file_range_inline() without freeing the reserved qgroup data, resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data() in such cases.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71269
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not free data reservation in fallback from inline due to -ENOSPC If we fail to create an inline extent due to -ENOSPC, we will attempt to go through the normal COW path, reserve an extent, create an ordered extent, etc. However we were always freeing the reserved qgroup data, which is wrong since we will use data. Fix this by freeing the reserved qgroup data in __cow_file_range_inline() only if we are not doing the fallback (ret is <= 0).

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71270
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Enable exception fixup for specific ADE subcode This patch allows the LoongArch BPF JIT to handle recoverable memory access errors generated by BPF_PROBE_MEM* instructions. When a BPF program performs memory access operations, the instructions it executes may trigger ADEM exceptions. The kernel’s built-in BPF exception table mechanism (EX_TYPE_BPF) will generate corresponding exception fixup entries in the JIT compilation phase; however, the architecture-specific trap handling function needs to proactively call the common fixup routine to achieve exception recovery. do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs, ensure safe execution. Relevant test cases: illegal address access tests in module_attach and subprogs_extable of selftests/bpf.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71271
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hfsplus: ensure sb->s_fs_info is always cleaned up When hfsplus was converted to the new mount api a bug was introduced by changing the allocation pattern of sb->s_fs_info. If setup_bdev_super() fails after a new superblock has been allocated by sget_fc(), but before hfsplus_fill_super() takes ownership of the filesystem-specific s_fs_info data it was leaked. Fix this by freeing sb->s_fs_info in hfsplus_kill_super().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71272
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller. Switch to using device_add() instead of device_register() to handle the split initialization.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71273
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71274
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since the introduction of driver_set_override, the comments in include/linux/rpmsg.h have stated that this helper must be used to set or clear driver_override, but the implementation was not updated until now. Because driver_set_override modifies and frees the string while holding the device_lock, the new driver_override_show now correctly holds the device_lock during the read operation to prevent the race. Additionally, since rpmsg_string_attr has only ever been used for driver_override, removing the macro simplifies the code.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71285
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels MHI stack offers the 'auto_queue' feature, which allows the MHI stack to auto queue the buffers for the RX path (DL channel). Though this feature simplifies the client driver design, it introduces race between the client drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback' for the DL channel may get called before the client driver is fully probed. This means, by the time the dl_callback gets called, the client driver's structures might not be initialized, leading to NULL ptr dereference. Currently, the drivers have to workaround this issue by initializing the internal structures before calling mhi_prepare_for_transfer_autoqueue(). But even so, there is a chance that the client driver's internal code path may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is called, leading to similar NULL ptr dereference. This issue has been reported on the Qcom X1E80100 CRD machines affecting boot. So to properly fix all these races, drop the MHI 'auto_queue' feature altogether and let the client driver (QRTR) manage the RX buffers manually. In the QRTR driver, queue the RX buffers based on the ring length during probe and recycle the buffers in 'dl_callback' once they are consumed. This also warrants removing the setting of 'auto_queue' flag from controller drivers. Currently, this 'auto_queue' feature is only enabled for IPCR DL channel. So only the QRTR client driver requires the modification.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71286
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls The size of the data behind of scontrol->ipc_control_data for bytes controls is: [1] sizeof(struct sof_ipc4_control_data) + // kernel only struct [2] sizeof(struct sof_abi_hdr)) + payload The max_size specifies the size of [2] and it is coming from topology. Change the function to take this into account and allocate adequate amount of memory behind scontrol->ipc_control_data. With the change we will allocate [1] amount more memory to be able to hold the full size of data.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71287
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71288
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leaks on common probe Make sure to drop the reference taken when looking up the SMI device during common probe on late probe failure (e.g. probe deferral) and on driver unbind.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71290
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: misc: ti_fpc202: fix a potential memory leak in probe function Use for_each_child_of_node_scoped() to simplify the code and ensure the device node reference is automatically released when the loop scope ends.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71291
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: misc: bcm_vk: Fix possible null-pointer dereferences in bcm_vk_read() In the function bcm_vk_read(), the pointer entry is checked, indicating that it can be NULL. If entry is NULL and rc is set to -EMSGSIZE, the following code may cause null-pointer dereferences: struct vk_msg_blk tmp_msg = entry->to_h_msg[0]; set_msg_id(&tmp_msg, entry->usr_msg_id); tmp_msg.size = entry->to_h_blks - 1; To prevent these possible null-pointer dereferences, copy to_h_msg, usr_msg_id, and to_h_blks from iter into temporary variables, and return these temporary variables to the application instead of accessing them through a potentially NULL entry.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71292
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: jfs: nlink overflow in jfs_rename If nlink is maximal for a directory (-1) and inside that directory you perform a rename for some child directory (not moving from the parent), then the nlink of the first directory is first incremented and later decremented. Normally this is fine, but when nlink = -1 this causes a wrap around to 0, and then drop_nlink issues a warning. After applying the patch syzbot no longer issues any warnings. I also ran some basic fs tests to look for any regressions.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71293
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/ras: Move ras data alloc before bad page check In the rare event if eeprom has only invalid address entries, allocation is skipped, this causes following NULL pointer issue [ 547.103445] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 547.118897] #PF: supervisor read access in kernel mode [ 547.130292] #PF: error_code(0x0000) - not-present page [ 547.141689] PGD 124757067 P4D 0 [ 547.148842] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 547.158504] CPU: 49 PID: 8167 Comm: cat Tainted: G OE 6.8.0-38-generic #38-Ubuntu [ 547.177998] Hardware name: Supermicro AS -8126GS-TNMR/H14DSG-OD, BIOS 1.7 09/12/2025 [ 547.195178] RIP: 0010:amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu] [ 547.210375] Code: e8 63 78 82 c0 45 31 d2 45 3b 75 08 48 8b 45 a0 73 44 44 89 f1 48 8b 7d 88 48 89 ca 48 c1 e2 05 48 29 ca 49 8b 4d 00 48 01 d1 <48> 83 79 10 00 74 17 49 63 f2 48 8b 49 08 41 83 c2 01 48 8d 34 76 [ 547.252045] RSP: 0018:ffa0000067287ac0 EFLAGS: 00010246 [ 547.263636] RAX: ff11000167c28130 RBX: ff11000127600000 RCX: 0000000000000000 [ 547.279467] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ff11000125b1c800 [ 547.295298] RBP: ffa0000067287b50 R08: 0000000000000000 R09: 0000000000000000 [ 547.311129] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 547.326959] R13: ff11000217b1de00 R14: 0000000000000000 R15: 0000000000000092 [ 547.342790] FS: 0000746e59d14740(0000) GS:ff11017dfda80000(0000) knlGS:0000000000000000 [ 547.360744] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 547.373489] CR2: 0000000000000010 CR3: 000000019585e001 CR4: 0000000000f71ef0 [ 547.389321] PKRU: 55555554 [ 547.395316] Call Trace: [ 547.400737] [ 547.405386] ? show_regs+0x6d/0x80 [ 547.412929] ? __die+0x24/0x80 [ 547.419697] ? page_fault_oops+0x99/0x1b0 [ 547.428588] ? do_user_addr_fault+0x2ee/0x6b0 [ 547.438249] ? exc_page_fault+0x83/0x1b0 [ 547.446949] ? asm_exc_page_fault+0x27/0x30 [ 547.456225] ? amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu] [ 547.470040] ? mas_wr_modify+0xcd/0x140 [ 547.478548] sysfs_kf_bin_read+0x63/0xb0 [ 547.487248] kernfs_file_read_iter+0xa1/0x190 [ 547.496909] kernfs_fop_read_iter+0x25/0x40 [ 547.506182] vfs_read+0x255/0x390 This also result in space left assigned to negative values. Moving data alloc call before bad page check resolves both the issue.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71294
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer issue buffer funcs If SDMA block not enabled, buffer_funcs will not initialize, fix the null pointer issue if buffer_funcs not initialized.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71295
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs/buffer: add alert in try_to_free_buffers() for folios without buffers try_to_free_buffers() can be called on folios with no buffers attached when filemap_release_folio() is invoked on a folio belonging to a mapping with AS_RELEASE_ALWAYS set but no release_folio operation defined. In such cases, folio_needs_release() returns true because of the AS_RELEASE_ALWAYS flag, but the folio has no private buffer data. This causes try_to_free_buffers() to call drop_buffers() on a folio with no buffers, leading to a null pointer dereference. Adding a check in try_to_free_buffers() to return early if the folio has no buffers attached, with WARN_ON_ONCE() to alert about the misconfiguration. This provides defensive hardening.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71296
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around purge Acquire and release the GEM object's reservation lock around calls to the object's purge operation. The tests use drm_gem_shmem_purge_locked(), which led to errors such as show below. [ 58.709128] WARNING: CPU: 1 PID: 1354 at drivers/gpu/drm/drm_gem_shmem_helper.c:515 drm_gem_shmem_purge_locked+0x51c/0x740 Only export the new helper drm_gem_shmem_purge() for Kunit tests. This is not an interface for regular drivers.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71297
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode() rtw8822b_set_antenna() can be called from userspace when the chip is powered off. In that case a WARNING is triggered in rtw8822b_config_trx_mode() because trying to read the RF registers when the chip is powered off returns an unexpected value. Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when the chip is powered on. ------------[ cut here ]------------ write RF mode table fail WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021 RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] Call Trace: rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b] rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb] ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3] nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? netdev_run_todo+0x63/0x550 genl_family_rcv_msg_doit+0xfc/0x160 genl_rcv_msg+0x1aa/0x2b0 ? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 ? refill_obj_stock+0x12e/0x240 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? do_syscall_64+0x81/0x970 ? ksys_read+0x73/0xf0 ? do_syscall_64+0x81/0x970 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71298
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around madvise Acquire and release the GEM object's reservation lock around calls to the object's madvide operation. The tests use drm_gem_shmem_madvise_locked(), which led to errors such as show below. [ 58.339389] WARNING: CPU: 1 PID: 1352 at drivers/gpu/drm/drm_gem_shmem_helper.c:499 drm_gem_shmem_madvise_locked+0xde/0x140 Only export the new helper drm_gem_shmem_madvise() for Kunit tests. This is not an interface for regular drivers.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71299
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Parse DT for flashes with the rest of the DT parsing The recent refactoring of where runtime PM is enabled done in commit f1eb4e792bb1 ("spi: spi-cadence-quadspi: Enable pm runtime earlier to avoid imbalance") made the fact that when we do a pm_runtime_disable() in the error paths of probe() we can trigger a runtime disable which in turn results in duplicate clock disables. This is particularly likely to happen when there is missing or broken DT description for the flashes attached to the controller. Early on in the probe function we do a pm_runtime_get_noresume() since the probe function leaves the device in a powered up state but in the error path we can't assume that PM is enabled so we also manually disable everything, including clocks. This means that when runtime PM is active both it and the probe function release the same reference to the main clock for the IP, triggering warnings from the clock subsystem: [ 8.693719] clk:75:7 already disabled [ 8.693791] WARNING: CPU: 1 PID: 185 at /usr/src/kernel/drivers/clk/clk.c:1188 clk_core_disable+0xa0/0xb ... [ 8.694261] clk_core_disable+0xa0/0xb4 (P) [ 8.694272] clk_disable+0x38/0x60 [ 8.694283] cqspi_probe+0x7c8/0xc5c [spi_cadence_quadspi] [ 8.694309] platform_probe+0x5c/0xa4 Dealing with this issue properly is complicated by the fact that we don't know if runtime PM is active so can't tell if it will disable the clocks or not. We can, however, sidestep the issue for the flash descriptions by moving their parsing to when we parse the controller properties which also save us doing a bunch of setup which can never be used so let's do that.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71300
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Revert "arm64: zynqmp: Add an OP-TEE node to the device tree" This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe. OP-TEE logic in U-Boot automatically injects a reserved-memory node along with optee firmware node to kernel device tree. The injection logic is dependent on that there is no manually defined optee node. Having the node in zynqmp.dtsi effectively breaks OP-TEE's insertion of the reserved-memory node, causing memory access violations during runtime.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71301
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around vmap/vunmap Acquire and release the GEM object's reservation lock around vmap and vunmap operations. The tests use vmap_locked, which led to errors such as show below. [ 122.292030] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:390 drm_gem_shmem_vmap_locked+0x3a3/0x6f0 [ 122.468066] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:293 drm_gem_shmem_pin_locked+0x1fe/0x350 [ 122.563504] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:234 drm_gem_shmem_get_pages_locked+0x23c/0x370 [ 122.662248] WARNING: CPU: 2 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:452 drm_gem_shmem_vunmap_locked+0x101/0x330 Only export the new vmap/vunmap helpers for Kunit tests. These are not interfaces for regular drivers.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71302
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: fix for dma-fence safe access rules Commit 506aa8b02a8d6 ("dma-fence: Add safe access helpers and document the rules") details the dma-fence safe access rules. The most common culprit is that drm_sched_fence_get_timeline_name may race with group_free_queue.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2025-71314
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Recover from panthor_gpu_flush_caches() failures We have seen a few cases where the whole memory subsystem is blocked and flush operations never complete. When that happens, we want to: - schedule a reset, so we can recover from this situation - in the reset path, we need to reset the pending_reqs so we can send new commands after the reset - if more panthor_gpu_flush_caches() operations are queued after the timeout, we skip them and return -EIO directly to avoid needless waits (the memory block won't miraculously work again) Note that we drop the WARN_ON()s because these hangs can be triggered with buggy GPU jobs created by the UMD, and there's no way we can prevent it. We do keep the error messages though. v2: - New patch v3: - Collect R-b - Explicitly mention the fact we dropped the WARN_ON()s in the commit message v4: - No changes

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23060
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than the minimum expected length, crypto_authenc_esn_decrypt() can advance past the end of the destination scatterlist and trigger a NULL pointer dereference in scatterwalk_map_and_copy(), leading to a kernel panic (DoS). Add a minimum AAD length check to fail fast on invalid inputs.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23061
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In kvaser_usb_remove_interfaces() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23062
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs attributes: 1. Off-by-one error: The loop condition used '<=' instead of '<', causing access beyond array bounds. Since array indices are 0-based and go from 0 to instances_count-1, the loop should use '<'. 2. Missing NULL check: The code dereferenced attr_name_kobj->name without checking if attr_name_kobj was NULL, causing a null pointer dereference in min_length_show() and other attribute show functions. The panic occurred when fwupd tried to read BIOS configuration attributes: Oops: general protection fault [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg] Add a NULL check for attr_name_kobj before dereferencing and corrects the loop boundary to match the pattern used elsewhere in the driver.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23063
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: uacce: ensure safe queue release with state management Directly calling `put_queue` carries risks since it cannot guarantee that resources of `uacce_queue` have been fully released beforehand. So adding a `stop_queue` operation for the UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to the final resource release ensures safety. Queue states are defined as follows: - UACCE_Q_ZOMBIE: Initial state - UACCE_Q_INIT: After opening `uacce` - UACCE_Q_STARTED: After `start` is issued via `ioctl` When executing `poweroff -f` in virt while accelerator are still working, `uacce_fops_release` and `uacce_remove` may execute concurrently. This can cause `uacce_put_queue` within `uacce_fops_release` to access a NULL `ops` pointer. Therefore, add state checks to prevent accessing freed pointers.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23064
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: avoid possible NULL deref tcf_ife_encode() must make sure ife_encode() does not return NULL. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166 CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full) Call Trace: ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101 tcf_ife_encode net/sched/act_ife.c:841 [inline] tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877 tc_act include/net/tc_wrapper.h:130 [inline] tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152 tcf_exts_exec include/net/pkt_cls.h:349 [inline] mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1764 [inline] tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860 multiq_classify net/sched/sch_multiq.c:39 [inline] multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66 dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147 __dev_xmit_skb net/core/dev.c:4262 [inline] __dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23065
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix memory leak in wbrf_record() The tmp buffer is allocated using kcalloc() but is not freed if acpi_evaluate_dsm() fails. This causes a memory leak in the error path. Fix this by explicitly freeing the tmp buffer in the error handling path of acpi_evaluate_dsm().

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23066
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recvmsg() unconditional requeue If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at the front of the recvmsg queue already has its mutex locked, it requeues the call - whether or not the call is already queued. The call may be on the queue because MSG_PEEK was also passed and so the call was not dequeued or because the I/O thread requeued it. The unconditional requeue may then corrupt the recvmsg queue, leading to things like UAFs or refcount underruns. Fix this by only requeuing the call if it isn't already on the queue - and moving it to the front if it is already queued. If we don't queue it, we have to put the ref we obtained by dequeuing it. Also, MSG_PEEK doesn't dequeue the call so shouldn't call rxrpc_notify_socket() for the call if we didn't use up all the data on the queue, so fix that also.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23067
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iommu/io-pgtable-arm: fix size_t signedness bug in unmap path __arm_lpae_unmap() returns size_t but was returning -ENOENT (negative error code) when encountering an unmapped PTE. Since size_t is unsigned, -ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE on 64-bit systems). This corrupted value propagates through the call chain: __arm_lpae_unmap() returns -ENOENT as size_t -> arm_lpae_unmap_pages() returns it -> __iommu_unmap() adds it to iova address -> iommu_pgsize() triggers BUG_ON due to corrupted iova This can cause IOVA address overflow in __iommu_unmap() loop and trigger BUG_ON in iommu_pgsize() from invalid address alignment. Fix by returning 0 instead of -ENOENT. The WARN_ON already signals the error condition, and returning 0 (meaning "nothing unmapped") is the correct semantic for size_t return type. This matches the behavior of other io-pgtable implementations (io-pgtable-arm-v7s, io-pgtable-dart) which return 0 on error conditions.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23068
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: spi: spi-sprd-adi: Fix double free in probe error path The driver currently uses spi_alloc_host() to allocate the controller but registers it using devm_spi_register_controller(). If devm_register_restart_handler() fails, the code jumps to the put_ctlr label and calls spi_controller_put(). However, since the controller was registered via a devm function, the device core will automatically call spi_controller_put() again when the probe fails. This results in a double-free of the spi_controller structure. Fix this by switching to devm_spi_alloc_host() and removing the manual spi_controller_put() call.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23069
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential underflow in virtio_transport_get_credit() The credit calculation in virtio_transport_get_credit() uses unsigned arithmetic: ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt); If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes are in flight, the subtraction can underflow and produce a large positive value, potentially allowing more data to be queued than the peer can handle. Reuse virtio_transport_has_space() which already handles this case and add a comment to make it clear why we are doing that. [Stefano: use virtio_transport_has_space() instead of duplicating the code] [Stefano: tweak the commit message]

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23070
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Octeontx2-af: Add proper checks for fwdata firmware populates MAC address, link modes (supported, advertised) and EEPROM data in shared firmware structure which kernel access via MAC block(CGX/RPM). Accessing fwdata, on boards booted with out MAC block leading to kernel panics. Internal error: Oops: 0000000096000005 [#1] SMP [ 10.460721] Modules linked in: [ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT [ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT) [ 10.479793] Workqueue: events work_for_cpu_fn [ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 10.491124] pc : rvu_sdp_init+0x18/0x114 [ 10.495051] lr : rvu_probe+0xe58/0x1d18

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23071
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: regmap: Fix race condition in hwspinlock irqsave routine Previously, the address of the shared member '&map->spinlock_flags' was passed directly to 'hwspin_lock_timeout_irqsave'. This creates a race condition where multiple contexts contending for the lock could overwrite the shared flags variable, potentially corrupting the state for the current lock owner. Fix this by using a local stack variable 'flags' to store the IRQ state temporarily.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23072
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: l2tp: Fix memleak in l2tp_udp_encap_recv(). syzbot reported memleak of struct l2tp_session, l2tp_tunnel, sock, etc. [0] The cited commit moved down the validation of the protocol version in l2tp_udp_encap_recv(). The new place requires an extra error handling to avoid the memleak. Let's call l2tp_session_put() there. [0]: BUG: memory leak unreferenced object 0xffff88810a290200 (size 512): comm "syz.0.17", pid 6086, jiffies 4294944299 hex dump (first 32 bytes): 7d eb 04 0c 00 00 00 00 01 00 00 00 00 00 00 00 }............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc babb6a4f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] __do_kmalloc_node mm/slub.c:5656 [inline] __kmalloc_noprof+0x3e0/0x660 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] l2tp_session_create+0x3a/0x3b0 net/l2tp/l2tp_core.c:1778 pppol2tp_connect+0x48b/0x920 net/l2tp/l2tp_ppp.c:755 __sys_connect_file+0x7a/0xb0 net/socket.c:2089 __sys_connect+0xde/0x110 net/socket.c:2108 __do_sys_connect net/socket.c:2114 [inline] __se_sys_connect net/socket.c:2111 [inline] __x64_sys_connect+0x1c/0x30 net/socket.c:2111 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23073
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: Fix memory corruption due to not set vif driver data size The struct ieee80211_vif contains trailing space for vif driver data, when struct ieee80211_vif is allocated, the total memory size that is allocated is sizeof(struct ieee80211_vif) + size of vif driver data. The size of vif driver data is set by each WiFi driver as needed. The RSI911x driver does not set vif driver data size, no trailing space for vif driver data is therefore allocated past struct ieee80211_vif . The RSI911x driver does however use the vif driver data to store its vif driver data structure "struct vif_priv". An access to vif->drv_priv leads to access out of struct ieee80211_vif bounds and corruption of some memory. In case of the failure observed locally, rsi_mac80211_add_interface() would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv; vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member struct list_head new_flows . The flow = list_first_entry(head, struct fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus address, which when accessed causes a crash. The trigger is very simple, boot the machine with init=/bin/sh , mount devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1", "ip link set wlan0 down" and the crash occurs. Fix this by setting the correct size of vif driver data, which is the size of "struct vif_priv", so that memory is allocated and the driver can store its driver data in it, instead of corrupting memory around it.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23074
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23075
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In esd_usb_open(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In esd_usb_close() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in esd_usb_close(). Fix the memory leak by anchoring the URB in the esd_usb_read_bulk_callback() to the dev->rx_submitted anchor.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23076
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix potential OOB access in audio mixer handling In the audio mixer handling code of ctxfi driver, the conf field is used as a kind of loop index, and it's referred in the index callbacks (amixer_index() and sum_index()). As spotted recently by fuzzers, the current code causes OOB access at those functions. | UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48 | index 8 is out of range for type 'unsigned char [8]' After the analysis, the cause was found to be the lack of the proper (re-)initialization of conj field. This patch addresses those OOB accesses by adding the proper initializations of the loop indices.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23077
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge", v2. Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. However, it is handling merges incorrectly when it comes to mremap() of a faulted VMA adjacent to an unfaulted VMA. The issues arise in three cases: 1. Previous VMA unfaulted: copied -----| v |-----------|.............| | unfaulted |(faulted VMA)| |-----------|.............| prev 2. Next VMA unfaulted: copied -----| v |.............|-----------| |(faulted VMA)| unfaulted | |.............|-----------| next 3. Both adjacent VMAs unfaulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| unfaulted | |-----------|.............|-----------| prev next This series fixes each of these cases, and introduces self tests to assert that the issues are corrected. I also test a further case which was already handled, to assert that my changes continues to correctly handle it: 4. prev unfaulted, next faulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| faulted | |-----------|.............|-----------| prev next This bug was discovered via a syzbot report, linked to in the first patch in the series, I confirmed that this series fixes the bug. I also discovered that we are failing to check that the faulted VMA was not forked when merging a copied VMA in cases 1-3 above, an issue this series also addresses. I also added self tests to assert that this is resolved (and confirmed that the tests failed prior to this). I also cleaned up vma_expand() as part of this work, renamed vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was unduly confusing, and simplified the comments around this function. This patch (of 4): Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. The key piece of logic introduced was the ability to merge a faulted VMA immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to correctly handle anon_vma state. In the case of the merge of an existing VMA (that is changing properties of a VMA and then merging if those properties are shared by adjacent VMAs), dup_anon_vma() is invoked correctly. However in the case of the merge of a new VMA, a corner case peculiar to mremap() was missed. The issue is that vma_expand() only performs dup_anon_vma() if the target (the VMA that will ultimately become the merged VMA): is not the next VMA, i.e. the one that appears after the range in which the new VMA is to be established. A key insight here is that in all other cases other than mremap(), a new VMA merge either expands an existing VMA, meaning that the target VMA will be that VMA, or would have anon_vma be NULL. Specifically: * __mmap_region() - no anon_vma in place, initial mapping. * do_brk_flags() - expanding an existing VMA. * vma_merge_extend() - expanding an existing VMA. * relocate_vma_down() - no anon_vma in place, initial mapping. In addition, we are in the unique situation of needing to duplicate anon_vma state from a VMA that is neither the previous or next VMA being merged with. dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted case. This leaves four possibilities, in each case where the copied VMA is faulted: 1. Previous VMA unfaulted: copied -----| ---truncated---

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23078
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Fix buffer overflow in config retrieval The scarlett2_usb_get_config() function has a logic error in the endianness conversion code that can cause buffer overflows when count > 1. The code checks `if (size == 2)` where `size` is the total buffer size in bytes, then loops `count` times treating each element as u16 (2 bytes). This causes the loop to access `count * 2` bytes when the buffer only has `size` bytes allocated. Fix by checking the element size (config_item->size) instead of the total buffer size. This ensures the endianness conversion matches the actual element type.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23079
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify() On error handling paths, lineinfo_changed_notify() doesn't free the allocated resources which results leaks. Fix it.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23080
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23081
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: phy: intel-xway: fix OF node refcount leakage Automated review spotted am OF node reference count leakage when checking if the 'leds' child node exists. Call of_put_node() to correctly maintain the refcount.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23082
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"), the URB was re-anchored before usb_submit_urb() in gs_usb_receive_bulk_callback() to prevent a leak of this URB during cleanup. However, this patch did not take into account that usb_submit_urb() could fail. The URB remains anchored and usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops infinitely since the anchor list never becomes empty. To fix the bug, unanchor the URB when an usb_submit_urb() error occurs, also print an info message.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23083
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: fou: Don't allow 0 for FOU_ATTR_IPPROTO. fou_udp_recv() has the same problem mentioned in the previous patch. If FOU_ATTR_IPPROTO is set to 0, skb is not freed by fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu(). Let's forbid 0 for FOU_ATTR_IPPROTO.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23084
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is set to false, the driver may request the PMAC_ID from the firmware of the network card, and this function will store that PMAC_ID at the provided address pmac_id. This is the contract of this function. However, there is a location within the driver where both pmac_id_valid == false and pmac_id == NULL are being passed. This could result in dereferencing a NULL pointer. To resolve this issue, it is necessary to pass the address of a stub variable to the function.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23085
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the 'itt' object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit 'unsigned long' variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don't call virt_to_phys or similar interfaces. It's expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23086
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: cap TX credit to local buffer size The virtio transports derives its TX credit directly from peer_buf_alloc, which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value. On the host side this means that the amount of data we are willing to queue for a connection is scaled by a guest-chosen buffer size, rather than the host's own vsock configuration. A malicious guest can advertise a large buffer and read slowly, causing the host to allocate a correspondingly large amount of sk_buff memory. The same thing would happen in the guest with a malicious host, since virtio transports share the same code base. Introduce a small helper, virtio_transport_tx_buf_size(), that returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume peer_buf_alloc. This ensures the effective TX window is bounded by both the peer's advertised buffer and our own buf_alloc (already clamped to buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer cannot force the other to queue more data than allowed by its own vsock settings. On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with 32 guest vsock connections advertising 2 GiB each and reading slowly drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only recovered after killing the QEMU process. That said, if QEMU memory is limited with cgroups, the maximum memory used will be limited. With this patch applied: Before: MemFree: ~61.6 GiB Slab: ~142 MiB SUnreclaim: ~117 MiB After 32 high-credit connections: MemFree: ~61.5 GiB Slab: ~178 MiB SUnreclaim: ~152 MiB Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest remains responsive. Compatibility with non-virtio transports: - VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per socket based on the local vsk->buffer_* values; the remote side cannot enlarge those queues beyond what the local endpoint configured. - Hyper-V's vsock transport uses fixed-size VMBus ring buffers and an MTU bound; there is no peer-controlled credit field comparable to peer_buf_alloc, and the remote endpoint cannot drive in-flight kernel memory above those ring sizes. - The loopback path reuses virtio_transport_common.c, so it naturally follows the same semantics as the virtio transport. This change is limited to virtio_transport_common.c and thus affects virtio-vsock, vhost-vsock, and loopback, bringing them in line with the "remote window intersected with local policy" behaviour that VMCI and Hyper-V already effectively have. [Stefano: small adjustments after changing the previous patch] [Stefano: tweak the commit message]

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23087
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Fix potential memory leak in scsiback_remove() Memory allocated for struct vscsiblk_info in scsiback_probe() is not freed in scsiback_remove() leading to potential memory leaks on remove, as well as in the scsiback_probe() error paths. Fix that by freeing it in scsiback_remove().

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23088
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash on synthetic stacktrace field usage When creating a synthetic event based on an existing synthetic event that had a stacktrace field and the new synthetic event used that field a kernel crash occurred: ~# cd /sys/kernel/tracing ~# echo 's:stack unsigned long stack[];' > dynamic_events ~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger ~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger The above creates a synthetic event that takes a stacktrace when a task schedules out in a non-running state and passes that stacktrace to the sched_switch event when that task schedules back in. It triggers the "stack" synthetic event that has a stacktrace as its field (called "stack"). ~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events ~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger ~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger The above makes another synthetic event called "syscall_stack" that attaches the first synthetic event (stack) to the sys_exit trace event and records the stacktrace from the stack event with the id of the system call that is exiting. When enabling this event (or using it in a historgram): ~# echo 1 > events/synthetic/syscall_stack/enable Produces a kernel crash! BUG: unable to handle page fault for address: 0000000000400010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:trace_event_raw_event_synth+0x90/0x380 Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f RSP: 0018:ffffd2670388f958 EFLAGS: 00010202 RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0 RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50 R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010 R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90 FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0 Call Trace: ? __tracing_map_insert+0x208/0x3a0 action_trace+0x67/0x70 event_hist_trigger+0x633/0x6d0 event_triggers_call+0x82/0x130 trace_event_buffer_commit+0x19d/0x250 trace_event_raw_event_sys_exit+0x62/0xb0 syscall_exit_work+0x9d/0x140 do_syscall_64+0x20a/0x2f0 ? trace_event_raw_event_sched_switch+0x12b/0x170 ? save_fpregs_to_fpstate+0x3e/0x90 ? _raw_spin_unlock+0xe/0x30 ? finish_task_switch.isra.0+0x97/0x2c0 ? __rseq_handle_notify_resume+0xad/0x4c0 ? __schedule+0x4b8/0xd00 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x1ef/0x2f0 ? do_fault+0x2e9/0x540 ? __handle_mm_fault+0x7d1/0xf70 ? count_memcg_events+0x167/0x1d0 ? handle_mm_fault+0x1d7/0x2e0 ? do_user_addr_fault+0x2c3/0x7f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reason is that the stacktrace field is not labeled as such, and is treated as a normal field and not as a dynamic event that it is. In trace_event_raw_event_synth() the event is field is still treated as a dynamic array, but the retrieval of the data is considered a normal field, and the reference is just the meta data: // Meta data is retrieved instead of a dynamic array ---truncated---

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23089
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees mixer->id_elems but the controls already added to the card still reference the freed memory. Later when snd_card_register() runs, the OSS mixer layer calls their callbacks and hits a use-after-free read. Call trace: get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411 get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241 mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381 snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887 ... snd_card_register+0x4ed/0x6d0 sound/core/init.c:923 usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025 Fix by calling snd_ctl_remove() for all mixer controls before freeing id_elems. We save the next pointer first because snd_ctl_remove() frees the current element.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23090
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: slimbus: core: fix device reference leak on report present Slimbus devices can be allocated dynamically upon reception of report-present messages. Make sure to drop the reference taken when looking up already registered devices. Note that this requires taking an extra reference in case the device has not yet been registered and has to be allocated.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23091
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: intel_th: fix device leak on output open() Make sure to drop the reference taken when looking up the th device during output device open() on errors and on close(). Note that a recent commit fixed the leak in a couple of open() error paths but not all of them, and the reference is still leaking on successful open().

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23092
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source When simple_write_to_buffer() succeeds, it returns the number of bytes actually copied to the buffer. The code incorrectly uses 'count' as the index for null termination instead of the actual bytes copied. If count exceeds the buffer size, this leads to out-of-bounds write. Add a check for the count and use the return value as the index. The bug was validated using a demo module that mirrors the original code and was tested under QEMU. Pattern of the bug: - A fixed 64-byte stack buffer is filled using count. - If count > 64, the code still does buf[count] = '\0', causing an - out-of-bounds write on the stack. Steps for reproduce: - Opens the device node. - Writes 128 bytes of A to it. - This overflows the 64-byte stack buffer and KASAN reports the OOB. Found via static analysis. This is similar to the commit da9374819eb3 ("iio: backend: fix out-of-bound write")

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23093
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbd: fix dma_unmap_sg() nents The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23094
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: uacce: fix isolate sysfs check condition uacce supports the device isolation feature. If the driver implements the isolate_err_threshold_read and isolate_err_threshold_write callback functions, uacce will create sysfs files now. Users can read and configure the isolation policy through sysfs. Currently, sysfs files are created as long as either isolate_err_threshold_read or isolate_err_threshold_write callback functions are present. However, accessing a non-existent callback function may cause the system to crash. Therefore, intercept the creation of sysfs if neither read nor write exists; create sysfs if either is supported, but intercept unsupported operations at the call site.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23095
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23096
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: uacce: fix cdev handling in the cleanup path When cdev_device_add fails, it internally releases the cdev memory, and if cdev_device_del is then executed, it will cause a hang error. To fix it, we check the return value of cdev_device_add() and clear uacce->cdev to avoid calling cdev_device_del in the uacce_remove.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23097
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: migrate: correct lock ordering for hugetlb file folios Syzbot has found a deadlock (analyzed by Lance Yang): 1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock). 2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire folio_lock. migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() <- Takes folio_lock! -> remove_migration_ptes() -> __rmap_walk_file() -> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)! hugetlbfs_fallocate() -> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)! -> hugetlbfs_zero_partial_page() -> filemap_lock_hugetlb_folio() -> filemap_lock_folio() -> __filemap_get_folio <- Waits for folio_lock! The migration path is the one taking locks in the wrong order according to the documentation at the top of mm/rmap.c. So expand the scope of the existing i_mmap_lock to cover the calls to remove_migration_ptes() too. This is (mostly) how it used to be after commit c0d0381ade79. That was removed by 336bf30eb765 for both file & anon hugetlb pages when it should only have been removed for anon hugetlb pages.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23098
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netrom: fix double-free in nr_route_frame() In nr_route_frame(), old_skb is immediately freed without checking if nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL, the caller function will free old_skb again, causing a double-free bug. Therefore, to prevent this, we need to modify it to check whether nr_neigh->ax25 is NULL before freeing old_skb.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23099
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: bonding: limit BOND_MODE_8023AD to Ethernet devices BOND_MODE_8023AD makes sense for ARPHRD_ETHER only. syzbot reported: BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline] BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497 CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 __hw_addr_create net/core/dev_addr_lists.c:63 [inline] __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:868 [inline] dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886 bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180 do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963 do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 ____sys_sendmsg+0x505/0x820 net/socket.c:2592 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646 __sys_sendmsg+0x164/0x220 net/socket.c:2678 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307 do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332 entry_SYSENTER_compat_after_hwframe+0x84/0x8e The buggy address belongs to the variable: lacpdu_mcast_addr+0x0/0x40

Published: 2026-02-04Modified: 2026-06-19
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23100
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb_pmd_shared() Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23101
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: leds: led-class: Only Add LED to leds_list when it is fully ready Before this change the LED was added to leds_list before led_init_core() gets called adding it the list before led_classdev.set_brightness_work gets initialized. This leaves a window where led_trigger_register() of a LED's default trigger will call led_trigger_set() which calls led_set_brightness() which in turn will end up queueing the *uninitialized* led_classdev.set_brightness_work. This race gets hit by the lenovo-thinkpad-t14s EC driver which registers 2 LEDs with a default trigger provided by snd_ctl_led.ko in quick succession. The first led_classdev_register() causes an async modprobe of snd_ctl_led to run and that async modprobe manages to exactly hit the window where the second LED is on the leds_list without led_init_core() being called for it, resulting in: ------------[ cut here ]------------ WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390 Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025 ... Call trace: __flush_work+0x344/0x390 (P) flush_work+0x2c/0x50 led_trigger_set+0x1c8/0x340 led_trigger_register+0x17c/0x1c0 led_trigger_register_simple+0x84/0xe8 snd_ctl_led_init+0x40/0xf88 [snd_ctl_led] do_one_initcall+0x5c/0x318 do_init_module+0x9c/0x2b8 load_module+0x7e0/0x998 Close the race window by moving the adding of the LED to leds_list to after the led_init_core() call.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23102
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Fix restoration of SVE context When SME is supported, Restoring SVE signal context can go wrong in a few ways, including placing the task into an invalid state where the kernel may read from out-of-bounds memory (and may potentially take a fatal fault) and/or may kill the task with a SIGKILL. (1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into an invalid state where SVCR.SM is set (and sve_state is non-NULL) but TIF_SME is clear, consequently resuting in out-of-bounds memory reads and/or killing the task with SIGKILL. This can only occur in unusual (but legitimate) cases where the SVE signal context has either been modified by userspace or was saved in the context of another task (e.g. as with CRIU), as otherwise the presence of an SVE signal context with SVE_SIG_FLAG_SM implies that TIF_SME is already set. While in this state, task_fpsimd_load() will NOT configure SMCR_ELx (leaving some arbitrary value configured in hardware) before restoring SVCR and attempting to restore the streaming mode SVE registers from memory via sve_load_state(). As the value of SMCR_ELx.LEN may be larger than the task's streaming SVE vector length, this may read memory outside of the task's allocated sve_state, reading unrelated data and/or triggering a fault. While this can result in secrets being loaded into streaming SVE registers, these values are never exposed. As TIF_SME is clear, fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0 accesses to streaming mode SVE registers, so these cannot be accessed directly at EL0. As fpsimd_save_user_state() verifies the live vector length before saving (S)SVE state to memory, no secret values can be saved back to memory (and hence cannot be observed via ptrace, signals, etc). When the live vector length doesn't match the expected vector length for the task, fpsimd_save_user_state() will send a fatal SIGKILL signal to the task. Hence the task may be killed after executing userspace for some period of time. (2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the task's SVCR.SM. If SVCR.SM was set prior to restoring the context, then the task will be left in streaming mode unexpectedly, and some register state will be combined inconsistently, though the task will be left in legitimate state from the kernel's PoV. This can only occur in unusual (but legitimate) cases where ptrace has been used to set SVCR.SM after entry to the sigreturn syscall, as syscall entry clears SVCR.SM. In these cases, the the provided SVE register data will be loaded into the task's sve_state using the non-streaming SVE vector length and the FPSIMD registers will be merged into this using the streaming SVE vector length. Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires ensuring that the task's sme_state has been allocated, but as this could contain live ZA state, it should not be zeroed. Fix (2) by clearing SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear. For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME, and fp_type earlier, immediately after the allocation of sve_state/sme_state, before the restore of the actual register state. This makes it easier to ensure that these are always modified consistently, even if a fault is taken while reading the register data from the signal context. I do not expect any software to depend on the exact state restored when a fault is taken while reading the context.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23103
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipvlan: Make the addrs_lock be per port Make the addrs_lock be per port, not per ipvlan dev. Initial code seems to be written in the assumption, that any address change must occur under RTNL. But it is not so for the case of IPv6. So 1) Introduce per-port addrs_lock. 2) It was needed to fix places where it was forgotten to take lock (ipvlan_open/ipvlan_close) This appears to be a very minor problem though. Since it's highly unlikely that ipvlan_add_addr() will be called on 2 CPU simultaneously. But nevertheless, this could cause: 1) False-negative of ipvlan_addr_busy(): one interface iterated through all port->ipvlans + ipvlan->addrs under some ipvlan spinlock, and another added IP under its own lock. Though this is only possible for IPv6, since looks like only ipvlan_addr6_event() can be called without rtnl_lock. 2) Race since ipvlan_ht_addr_add(port) is called under different ipvlan->addrs_lock locks This should not affect performance, since add/remove IP is a rare situation and spinlock is not taken on fast paths.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23104
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ice: fix devlink reload call trace Commit 4da71a77fc3b ("ice: read internal temperature sensor") introduced internal temperature sensor reading via HWMON. ice_hwmon_init() was added to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a result if devlink reload is used to reinit the device and then the driver is removed, a call trace can occur. BUG: unable to handle page fault for address: ffffffffc0fd4b5d Call Trace: string+0x48/0xe0 vsnprintf+0x1f9/0x650 sprintf+0x62/0x80 name_show+0x1f/0x30 dev_attr_show+0x19/0x60 The call trace repeats approximately every 10 minutes when system monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs attributes that reference freed module memory. The sequence is: 1. Driver load, ice_hwmon_init() gets called from ice_init_feature() 2. Devlink reload down, flow does not call ice_remove() 3. Devlink reload up, ice_hwmon_init() gets called from ice_init_feature() resulting in a second instance 4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the first hwmon instance orphaned with dangling pointer Fix this by moving ice_hwmon_exit() from ice_remove() to ice_deinit_features() to ensure proper cleanup symmetry with ice_hwmon_init().

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23105
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag This is more of a preventive patch to make the code more consistent and to prevent possible exploits that employ child qlen manipulations on qfq. use cl_is_active instead of relying on the child qdisc's qlen to determine class activation.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23106
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: timekeeping: Adjust the leap state for the correct auxiliary timekeeper When __do_ajdtimex() was introduced to handle adjtimex for any timekeeper, this reference to tk_core was not updated. When called on an auxiliary timekeeper, the core timekeeper would be updated incorrectly. This gets caught by the lock debugging diagnostics because the timekeepers sequence lock gets written to without holding its associated spinlock: WARNING: include/linux/seqlock.h:226 at __do_adjtimex+0x394/0x3b0, CPU#2: test/125 aux_clock_adj (kernel/time/timekeeping.c:2979) __do_sys_clock_adjtime (kernel/time/posix-timers.c:1161 kernel/time/posix-timers.c:1173) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Update the correct auxiliary timekeeper.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23107
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA The code to restore a ZA context doesn't attempt to allocate the task's sve_state before setting TIF_SME. Consequently, restoring a ZA context can place a task into an invalid state where TIF_SME is set but the task's sve_state is NULL. In legitimate but uncommon cases where the ZA signal context was NOT created by the kernel in the context of the same task (e.g. if the task is saved/restored with something like CRIU), we have no guarantee that sve_state had been allocated previously. In these cases, userspace can enter streaming mode without trapping while sve_state is NULL, causing a later NULL pointer dereference when the kernel attempts to store the register state: | # ./sigreturn-za | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000096000046 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x06: level 2 translation fault | Data abort info: | ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000 | CM = 0, WnR = 1, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 52-bit VAs, pgdp=0000000101f47c00 | [0000000000000000] pgd=08000001021d8403, p4d=0800000102274403, pud=0800000102275403, pmd=0000000000000000 | Internal error: Oops: 0000000096000046 [#1] SMP | Modules linked in: | CPU: 0 UID: 0 PID: 153 Comm: sigreturn-za Not tainted 6.19.0-rc1 #1 PREEMPT | Hardware name: linux,dummy-virt (DT) | pstate: 214000c9 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : sve_save_state+0x4/0xf0 | lr : fpsimd_save_user_state+0xb0/0x1c0 | sp : ffff80008070bcc0 | x29: ffff80008070bcc0 x28: fff00000c1ca4c40 x27: 63cfa172fb5cf658 | x26: fff00000c1ca5228 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: fff00000c1ca4c40 x21: fff00000c1ca4c40 | x20: 0000000000000020 x19: fff00000ff6900f0 x18: 0000000000000000 | x17: fff05e8e0311f000 x16: 0000000000000000 x15: 028fca8f3bdaf21c | x14: 0000000000000212 x13: fff00000c0209f10 x12: 0000000000000020 | x11: 0000000000200b20 x10: 0000000000000000 x9 : fff00000ff69dcc0 | x8 : 00000000000003f2 x7 : 0000000000000001 x6 : fff00000c1ca5b48 | x5 : fff05e8e0311f000 x4 : 0000000008000000 x3 : 0000000000000000 | x2 : 0000000000000001 x1 : fff00000c1ca5970 x0 : 0000000000000440 | Call trace: | sve_save_state+0x4/0xf0 (P) | fpsimd_thread_switch+0x48/0x198 | __switch_to+0x20/0x1c0 | __schedule+0x36c/0xce0 | schedule+0x34/0x11c | exit_to_user_mode_loop+0x124/0x188 | el0_interrupt+0xc8/0xd8 | __el0_irq_handler_common+0x18/0x24 | el0t_64_irq_handler+0x10/0x1c | el0t_64_irq+0x198/0x19c | Code: 54000040 d51b4408 d65f03c0 d503245f (e5bb5800) | ---[ end trace 0000000000000000 ]--- Fix this by having restore_za_context() ensure that the task's sve_state is allocated, matching what we do when taking an SME trap. Any live SVE/SSVE state (which is restored earlier from a separate signal context) must be preserved, and hence this is not zeroed.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23108
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback usb_8dev_read_bulk_callback(), the URBs are processed and resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23109
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs/writeback: skip AS_NO_DATA_INTEGRITY mappings in wait_sb_inodes() Above the while() loop in wait_sb_inodes(), we document that we must wait for all pages under writeback for data integrity. Consequently, if a mapping, like fuse, traditionally does not have data integrity semantics, there is no need to wait at all; we can simply skip these inodes. This restores fuse back to prior behavior where syncs are no-ops. This fixes a user regression where if a system is running a faulty fuse server that does not reply to issued write requests, this causes wait_sb_inodes() to wait forever.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23110
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Wake up the error handler when final completions race against each other The fragile ordering between marking commands completed or failed so that the error handler only wakes when the last running command completes or times out has race conditions. These race conditions can cause the SCSI layer to fail to wake the error handler, leaving I/O through the SCSI host stuck as the error state cannot advance. First, there is an memory ordering issue within scsi_dec_host_busy(). The write which clears SCMD_STATE_INFLIGHT may be reordered with reads counting in scsi_host_busy(). While the local CPU will see its own write, reordering can allow other CPUs in scsi_dec_host_busy() or scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to see a host busy equal to the host_failed count. This race condition can be prevented with a memory barrier on the error path to force the write to be visible before counting host busy commands. Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By counting busy commands before incrementing host_failed, it can race with a final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does not see host_failed incremented but scsi_eh_inc_host_failed() counts busy commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(), resulting in neither waking the error handler task. This needs the call to scsi_host_busy() to be moved after host_failed is incremented to close the race condition.

Published: 2026-02-04Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23111
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() nft_map_catchall_activate() has an inverted element activity check compared to its non-catchall counterpart nft_mapelem_activate() and compared to what is logically required. nft_map_catchall_activate() is called from the abort path to re-activate catchall map elements that were deactivated during a failed transaction. It should skip elements that are already active (they don't need re-activation) and process elements that are inactive (they need to be restored). Instead, the current code does the opposite: it skips inactive elements and processes active ones. Compare the non-catchall activate callback, which is correct: nft_mapelem_activate(): if (nft_set_elem_active(ext, iter->genmask)) return 0; /* skip active, process inactive */ With the buggy catchall version: nft_map_catchall_activate(): if (!nft_set_elem_active(ext, genmask)) continue; /* skip inactive, process active */ The consequence is that when a DELSET operation is aborted, nft_setelem_data_activate() is never called for the catchall element. For NFT_GOTO verdict elements, this means nft_data_hold() is never called to restore the chain->use reference count. Each abort cycle permanently decrements chain->use. Once chain->use reaches zero, DELCHAIN succeeds and frees the chain while catchall verdict elements still reference it, resulting in a use-after-free. This is exploitable for local privilege escalation from an unprivileged user via user namespaces + nftables on distributions that enable CONFIG_USER_NS and CONFIG_NF_TABLES. Fix by removing the negation so the check matches nft_mapelem_activate(): skip active elements, process inactive ones.

Published: 2026-02-13Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23112
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU length or offset exceeds sg_cnt and then use bogus sg->length/offset values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining entries, and sg->length/offset before building the bvec.

Published: 2026-02-13Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23113
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop Currently this is checked before running the pending work. Normally this is quite fine, as work items either end up blocking (which will create a new worker for other items), or they complete fairly quickly. But syzbot reports an issue where io-wq takes seemingly forever to exit, and with a bit of debugging, this turns out to be because it queues a bunch of big (2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't support ->read_iter(), loop_rw_iter() ends up handling them. Each read returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of these pending, processing the whole chain can take a long time. Easily longer than the syzbot uninterruptible sleep timeout of 140 seconds. This then triggers a complaint off the io-wq exit path: INFO: task syz.4.135:6326 blocked for more than 143 seconds. Not tainted syzkaller #0 Blocked by coredump. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000 Call Trace: context_switch kernel/sched/core.c:5256 [inline] __schedule+0x1139/0x6150 kernel/sched/core.c:6863 __schedule_loop kernel/sched/core.c:6945 [inline] schedule+0xe7/0x3a0 kernel/sched/core.c:6960 schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:100 [inline] __wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121 io_wq_exit_workers io_uring/io-wq.c:1328 [inline] io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356 io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203 io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651 io_uring_files_cancel include/linux/io_uring.h:19 [inline] do_exit+0x2ce/0x2bd0 kernel/exit.c:911 do_group_exit+0xd3/0x2a0 kernel/exit.c:1112 get_signal+0x2671/0x26d0 kernel/signal.c:3034 arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:41 [inline] exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa02738f749 RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098 RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98 There's really nothing wrong here, outside of processing these reads will take a LONG time. However, we can speed up the exit by checking the IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will exit the ring after queueing up all of these reads. Then once the first item is processed, io-wq will simply cancel the rest. That should avoid syzbot running into this complaint again.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23114
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: ptrace: Fix SVE writes on !SME systems When SVE is supported but SME is not supported, a ptrace write to the NT_ARM_SVE regset can place the tracee into an invalid state where (non-streaming) SVE register data is stored in FP_STATE_SVE format but TIF_SVE is clear. This can result in a later warning from fpsimd_restore_current_state(), e.g. WARNING: CPU: 0 PID: 7214 at arch/arm64/kernel/fpsimd.c:383 fpsimd_restore_current_state+0x50c/0x748 When this happens, fpsimd_restore_current_state() will set TIF_SVE, placing the task into the correct state. This occurs before any other check of TIF_SVE can possibly occur, as other checks of TIF_SVE only happen while the FPSIMD/SVE/SME state is live. Thus, aside from the warning, there is no functional issue. This bug was introduced during rework to error handling in commit: 9f8bf718f2923 ("arm64/fpsimd: ptrace: Gracefully handle errors") ... where the setting of TIF_SVE was moved into a block which is only executed when system_supports_sme() is true. Fix this by removing the system_supports_sme() check. This ensures that TIF_SVE is set for (SVE-formatted) writes to NT_ARM_SVE, at the cost of unconditionally manipulating the tracee's saved svcr value. The manipulation of svcr is benign and inexpensive, and we already do similar elsewhere (e.g. during signal handling), so I don't think it's worth guarding this with system_supports_sme() checks. Aside from the above, there is no functional change. The 'type' argument to sve_set_common() is only set to ARM64_VEC_SME (in ssve_set())) when system_supports_sme(), so the ARM64_VEC_SME case in the switch statement is still unreachable when !system_supports_sme(). When CONFIG_ARM64_SME=n, the only caller of sve_set_common() is sve_set(), and the compiler can constant-fold for the case where type is ARM64_VEC_SVE, removing the logic for other cases.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23115
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: serial: Fix not set tty->port race condition Revert commit bfc467db60b7 ("serial: remove redundant tty_port_link_device()") because the tty_port_link_device() is not redundant: the tty->port has to be confured before we call uart_configure_port(), otherwise user-space can open console without TTY linked to the driver. This tty_port_link_device() was added explicitly to avoid this exact issue in commit fb2b90014d78 ("tty: link tty and port before configuring it as console"), so offending commit basically reverted the fix saying it is redundant without addressing the actual race condition presented there. Reproducible always as tty->port warning on Qualcomm SoC with most of devices disabled, so with very fast boot, and one serial device being the console: printk: legacy console [ttyMSM0] enabled printk: legacy console [ttyMSM0] enabled printk: legacy bootconsole [qcom_geni0] disabled printk: legacy bootconsole [qcom_geni0] disabled ------------[ cut here ]------------ tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver! WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1 Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6 CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Qualcomm Technologies, Inc. Eliza (DT) ... tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P) tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3)) chrdev_open (fs/char_dev.c:411) do_dentry_open (fs/open.c:962) vfs_open (fs/open.c:1094) do_open (fs/namei.c:4634) path_openat (fs/namei.c:4793) do_filp_open (fs/namei.c:4820) do_sys_openat2 (fs/open.c:1391 (discriminator 3)) ... Starting Network Name Resolution... Apparently the flow with this small Yocto-based ramdisk user-space is: driver (qcom_geni_serial.c): user-space: ============================ =========== qcom_geni_serial_probe() uart_add_one_port() serial_core_register_port() serial_core_add_one_port() uart_configure_port() register_console() | | open console | ... | tty_init_dev() | driver->ports[idx] is NULL | tty_port_register_device_attr_serdev() tty_port_link_device() <- set driver->ports[idx]

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23116
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset and clock enable bits, but is ungated and reset together with the VPUs. So we can't reset G1 or G2 separately, it may led to the system hang. Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data. Let imx8mq_vpu_power_notifier() do really vpu reset.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23117
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ice: add missing ice_deinit_hw() in devlink reinit path devlink-reload results in ice_init_hw failed error, and then removing the ice driver causes a NULL pointer dereference. [ +0.102213] ice 0000:ca:00.0: ice_init_hw failed: -16 ... [ +0.000001] Call Trace: [ +0.000003] [ +0.000006] ice_unload+0x8f/0x100 [ice] [ +0.000081] ice_remove+0xba/0x300 [ice] Commit 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on error paths") removed ice_deinit_hw() from ice_deinit_dev(). As a result ice_devlink_reinit_down() no longer calls ice_deinit_hw(), but ice_devlink_reinit_up() still calls ice_init_hw(). Since the control queues are not uninitialized, ice_init_hw() fails with -EBUSY. Add ice_deinit_hw() to ice_devlink_reinit_down() to correspond with ice_init_hw() in ice_devlink_reinit_up().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23118
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix data-race warning and potential load/store tearing Fix the following: BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packet which is reporting an issue with the reads and writes to ->last_tx_at in: conn->peer->last_tx_at = ktime_get_seconds(); and: keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME; The lockless accesses to these to values aren't actually a problem as the read only needs an approximate time of last transmission for the purposes of deciding whether or not the transmission of a keepalive packet is warranted yet. Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit arch. Fix both of these by switching to an unsigned int for ->last_tx_at and only storing the LSW of the time64_t. It can then be reconstructed at need provided no more than 68 years has elapsed since the last transmission.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23119
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bonding: provide a net pointer to __skb_flow_dissect() After 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") we have to provide a net pointer to __skb_flow_dissect(), either via skb->dev, skb->sk, or a user provided pointer. In the following case, syzbot was able to cook a bare skb. WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053 Call Trace: bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline] __bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157 bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline] bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline] bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515 xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388 bpf_prog_run_xdp include/net/xdp.h:700 [inline] bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421 bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390 bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703 __sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182 __do_sys_bpf kernel/bpf/syscall.c:6274 [inline] __se_sys_bpf kernel/bpf/syscall.c:6272 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23120
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: l2tp: avoid one data-race in l2tp_tunnel_del_work() We should read sk->sk_socket only when dealing with kernel sockets. syzbot reported the following data-race: BUG: KCSAN: data-race in l2tp_tunnel_del_work / sk_common_release write to 0xffff88811c182b20 of 8 bytes by task 5365 on cpu 0: sk_set_socket include/net/sock.h:2092 [inline] sock_orphan include/net/sock.h:2118 [inline] sk_common_release+0xae/0x230 net/core/sock.c:4003 udp_lib_close+0x15/0x20 include/net/udp.h:325 inet_release+0xce/0xf0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:662 [inline] sock_close+0x6b/0x150 net/socket.c:1455 __fput+0x29b/0x650 fs/file_table.c:468 ____fput+0x1c/0x30 fs/file_table.c:496 task_work_run+0x131/0x1a0 kernel/task_work.c:233 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] __exit_to_user_mode_loop kernel/entry/common.c:44 [inline] exit_to_user_mode_loop+0x1fe/0x740 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x1e1/0x2b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff88811c182b20 of 8 bytes by task 827 on cpu 1: l2tp_tunnel_del_work+0x2f/0x1a0 net/l2tp/l2tp_core.c:1418 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0x4ce/0x9d0 kernel/workqueue.c:3340 worker_thread+0x582/0x770 kernel/workqueue.c:3421 kthread+0x489/0x510 kernel/kthread.c:463 ret_from_fork+0x149/0x290 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 value changed: 0xffff88811b818000 -> 0x0000000000000000

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23121
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mISDN: annotate data-race around dev->work dev->work can re read locklessly in mISDN_read() and mISDN_poll(). Add READ_ONCE()/WRITE_ONCE() annotations. BUG: KCSAN: data-race in mISDN_ioctl / mISDN_read write to 0xffff88812d848280 of 4 bytes by task 10864 on cpu 1: misdn_add_timer drivers/isdn/mISDN/timerdev.c:175 [inline] mISDN_ioctl+0x2fb/0x550 drivers/isdn/mISDN/timerdev.c:233 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xce/0x140 fs/ioctl.c:583 __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:583 x64_sys_call+0x14b0/0x3000 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff88812d848280 of 4 bytes by task 10857 on cpu 0: mISDN_read+0x1f2/0x470 drivers/isdn/mISDN/timerdev.c:112 do_loop_readv_writev fs/read_write.c:847 [inline] vfs_readv+0x3fb/0x690 fs/read_write.c:1020 do_readv+0xe7/0x210 fs/read_write.c:1080 __do_sys_readv fs/read_write.c:1165 [inline] __se_sys_readv fs/read_write.c:1162 [inline] __x64_sys_readv+0x45/0x50 fs/read_write.c:1162 x64_sys_call+0x2831/0x3000 arch/x86/include/generated/asm/syscalls_64.h:20 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000000 -> 0x00000001

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23122
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: igc: Reduce TSN TX packet buffer from 7KB to 5KB per queue The previous 7 KB per queue caused TX unit hangs under heavy timestamping load. Reducing to 5 KB avoids these hangs and matches the TSN recommendation in I225/I226 SW User Manual Section 7.5.4. The 8 KB "freed" by this change is currently unused. This reduction is not expected to impact throughput, as the i226 is PCIe-limited for small TSN packets rather than TX-buffer-limited.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23123
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: interconnect: debugfs: initialize src_node and dst_node to empty strings The debugfs_create_str() API assumes that the string pointer is either NULL or points to valid kmalloc() memory. Leaving the pointer uninitialized can cause problems. Initialize src_node and dst_node to empty strings before creating the debugfs entries to guarantee that reads and writes are safe.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23124
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: annotate data-race in ndisc_router_discovery() syzbot found that ndisc_router_discovery() could read and write in6_dev->ra_mtu without holding a lock [1] This looks fine, IFLA_INET6_RA_MTU is best effort. Add READ_ONCE()/WRITE_ONCE() to document the race. Note that we might also reject illegal MTU values (mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch. [1] BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discovery read to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1: ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558 ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841 icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989 ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438 ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500 ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79 ... write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0: ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559 ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841 icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989 ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438 ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500 ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79 ... value changed: 0x00000000 -> 0xe5400659

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23125
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key initialization fails: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2 RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline] RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401 Call Trace: sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189 sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111 sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217 sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169 sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052 sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88 sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243 sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127 The issue is triggered when sctp_auth_asoc_init_active_key() fails in sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the command sequence is currently: - SCTP_CMD_PEER_INIT - SCTP_CMD_TIMER_STOP (T1_INIT) - SCTP_CMD_TIMER_START (T1_COOKIE) - SCTP_CMD_NEW_STATE (COOKIE_ECHOED) - SCTP_CMD_ASSOC_SHKEY - SCTP_CMD_GEN_COOKIE_ECHO If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL to be queued by sctp_datamsg_from_user(). Since command interpretation stops on failure, no COOKIE_ECHO should been sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As a result, the DATA chunk can be transmitted together with the COOKIE_ECHO in sctp_outq_flush_data(), leading to the observed issue. Similar to the other places where it calls sctp_auth_asoc_init_active_key() right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting T1_COOKIE. This ensures that if shared key generation fails, authenticated DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT, giving the client another chance to process INIT_ACK and retry key setup.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23126
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix a race issue related to the operation on bpf_bound_progs list The netdevsim driver lacks a protection mechanism for operations on the bpf_bound_progs list. When the nsim_bpf_create_prog() performs list_add_tail, it is possible that nsim_bpf_destroy_prog() is simultaneously performs list_del. Concurrent operations on the list may lead to list corruption and trigger a kernel crash as follows: [ 417.290971] kernel BUG at lib/list_debug.c:62! [ 417.290983] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 417.290992] CPU: 10 PID: 168 Comm: kworker/10:1 Kdump: loaded Not tainted 6.19.0-rc5 #1 [ 417.291003] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 417.291007] Workqueue: events bpf_prog_free_deferred [ 417.291021] RIP: 0010:__list_del_entry_valid_or_report+0xa7/0xc0 [ 417.291034] Code: a8 ff 0f 0b 48 89 fe 48 89 ca 48 c7 c7 48 a1 eb ae e8 ed fb a8 ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 80 a1 eb ae e8 d9 fb a8 ff <0f> 0b 48 89 d1 48 c7 c7 d0 a1 eb ae 48 89 f2 48 89 c6 e8 c2 fb a8 [ 417.291040] RSP: 0018:ffffb16a40807df8 EFLAGS: 00010246 [ 417.291046] RAX: 000000000000006d RBX: ffff8e589866f500 RCX: 0000000000000000 [ 417.291051] RDX: 0000000000000000 RSI: ffff8e59f7b23180 RDI: ffff8e59f7b23180 [ 417.291055] RBP: ffffb16a412c9000 R08: 0000000000000000 R09: 0000000000000003 [ 417.291059] R10: ffffb16a40807c80 R11: ffffffffaf9edce8 R12: ffff8e594427ac20 [ 417.291063] R13: ffff8e59f7b44780 R14: ffff8e58800b7a05 R15: 0000000000000000 [ 417.291074] FS: 0000000000000000(0000) GS:ffff8e59f7b00000(0000) knlGS:0000000000000000 [ 417.291079] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.291083] CR2: 00007fc4083efe08 CR3: 00000001c3626006 CR4: 0000000000770ee0 [ 417.291088] PKRU: 55555554 [ 417.291091] Call Trace: [ 417.291096] [ 417.291103] nsim_bpf_destroy_prog+0x31/0x80 [netdevsim] [ 417.291154] __bpf_prog_offload_destroy+0x2a/0x80 [ 417.291163] bpf_prog_dev_bound_destroy+0x6f/0xb0 [ 417.291171] bpf_prog_free_deferred+0x18e/0x1a0 [ 417.291178] process_one_work+0x18a/0x3a0 [ 417.291188] worker_thread+0x27b/0x3a0 [ 417.291197] ? __pfx_worker_thread+0x10/0x10 [ 417.291207] kthread+0xe5/0x120 [ 417.291214] ? __pfx_kthread+0x10/0x10 [ 417.291221] ret_from_fork+0x31/0x50 [ 417.291230] ? __pfx_kthread+0x10/0x10 [ 417.291236] ret_from_fork_asm+0x1a/0x30 [ 417.291246] Add a mutex lock, to prevent simultaneous addition and deletion operations on the list.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23127
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: perf: Fix refcount warning on event->mmap_count increment When calling refcount_inc(&event->mmap_count) inside perf_mmap_rb(), the following warning is triggered: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 PoC: struct perf_event_attr attr = {0}; int fd = syscall(__NR_perf_event_open, &attr, 0, -1, -1, 0); mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); int victim = syscall(__NR_perf_event_open, &attr, 0, -1, fd, PERF_FLAG_FD_OUTPUT); mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, victim, 0); This occurs when creating a group member event with the flag PERF_FLAG_FD_OUTPUT. The group leader should be mmap-ed and then mmap-ing the event triggers the warning. Since the event has copied the output_event in perf_event_set_output(), event->rb is set. As a result, perf_mmap_rb() calls refcount_inc(&event->mmap_count) when event->mmap_count = 0. Disallow the case when event->mmap_count = 0. This also prevents two events from updating the same user_page.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23128
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64: Set __nocfi on swsusp_arch_resume() A DABT is reported[1] on an android based system when resume from hiberate. This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*() and does not have a CFI hash, but swsusp_arch_resume() will attempt to verify the CFI hash when calling a copy of swsusp_arch_suspend_exit(). Given that there's an existing requirement that the entrypoint to swsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.text section, we cannot fix this by marking swsusp_arch_suspend_exit() with SYM_FUNC_*(). The simplest fix for now is to disable the CFI check in swsusp_arch_resume(). Mark swsusp_arch_resume() as __nocfi to disable the CFI check. [1] [ 22.991934][ T1] Unable to handle kernel paging request at virtual address 0000000109170ffc [ 22.991934][ T1] Mem abort info: [ 22.991934][ T1] ESR = 0x0000000096000007 [ 22.991934][ T1] EC = 0x25: DABT (current EL), IL = 32 bits [ 22.991934][ T1] SET = 0, FnV = 0 [ 22.991934][ T1] EA = 0, S1PTW = 0 [ 22.991934][ T1] FSC = 0x07: level 3 translation fault [ 22.991934][ T1] Data abort info: [ 22.991934][ T1] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 [ 22.991934][ T1] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 22.991934][ T1] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 22.991934][ T1] [0000000109170ffc] user address but active_mm is swapper [ 22.991934][ T1] Internal error: Oops: 0000000096000007 [#1] PREEMPT SMP [ 22.991934][ T1] Dumping ftrace buffer: [ 22.991934][ T1] (ftrace buffer empty) [ 22.991934][ T1] Modules linked in: [ 22.991934][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.98-android15-8-g0b1d2aee7fc3-dirty-4k #1 688c7060a825a3ac418fe53881730b355915a419 [ 22.991934][ T1] Hardware name: Unisoc UMS9360-base Board (DT) [ 22.991934][ T1] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 22.991934][ T1] pc : swsusp_arch_resume+0x2ac/0x344 [ 22.991934][ T1] lr : swsusp_arch_resume+0x294/0x344 [ 22.991934][ T1] sp : ffffffc08006b960 [ 22.991934][ T1] x29: ffffffc08006b9c0 x28: 0000000000000000 x27: 0000000000000000 [ 22.991934][ T1] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000820 [ 22.991934][ T1] x23: ffffffd0817e3000 x22: ffffffd0817e3000 x21: 0000000000000000 [ 22.991934][ T1] x20: ffffff8089171000 x19: ffffffd08252c8c8 x18: ffffffc080061058 [ 22.991934][ T1] x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 0000000000000004 [ 22.991934][ T1] x14: ffffff8178c88000 x13: 0000000000000006 x12: 0000000000000000 [ 22.991934][ T1] x11: 0000000000000015 x10: 0000000000000001 x9 : ffffffd082533000 [ 22.991934][ T1] x8 : 0000000109171000 x7 : 205b5d3433393139 x6 : 392e32322020205b [ 22.991934][ T1] x5 : 000000010916f000 x4 : 000000008164b000 x3 : ffffff808a4e0530 [ 22.991934][ T1] x2 : ffffffd08058e784 x1 : 0000000082326000 x0 : 000000010a283000 [ 22.991934][ T1] Call trace: [ 22.991934][ T1] swsusp_arch_resume+0x2ac/0x344 [ 22.991934][ T1] hibernation_restore+0x158/0x18c [ 22.991934][ T1] load_image_and_restore+0xb0/0xec [ 22.991934][ T1] software_resume+0xf4/0x19c [ 22.991934][ T1] software_resume_initcall+0x34/0x78 [ 22.991934][ T1] do_one_initcall+0xe8/0x370 [ 22.991934][ T1] do_initcall_level+0xc8/0x19c [ 22.991934][ T1] do_initcalls+0x70/0xc0 [ 22.991934][ T1] do_basic_setup+0x1c/0x28 [ 22.991934][ T1] kernel_init_freeable+0xe0/0x148 [ 22.991934][ T1] kernel_init+0x20/0x1a8 [ 22.991934][ T1] ret_from_fork+0x10/0x20 [ 22.991934][ T1] Code: a9400a61 f94013e0 f9438923 f9400a64 (b85fc110) [catalin.marinas@arm.com: commit log updated by Mark Rutland]

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23129
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dpll: Prevent duplicate registrations Modify the internal registration helpers dpll_xa_ref_{dpll,pin}_add() to reject duplicate registration attempts. Previously, if a caller attempted to register the same pin multiple times (with the same ops, priv, and cookie) on the same device, the core silently increments the reference count and return success. This behavior is incorrect because if the caller makes these duplicate registrations then for the first one dpll_pin_registration is allocated and for others the associated dpll_pin_ref.refcount is incremented. During the first unregistration the associated dpll_pin_registration is freed and for others WARN is fired. Fix this by updating the logic to return `-EEXIST` if a matching registration is found to enforce a strict "register once" policy.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23130
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dead lock while flushing management frames Commit [1] converted the management transmission work item into a wiphy work. Since a wiphy work can only run under wiphy lock protection, a race condition happens in below scenario: 1. a management frame is queued for transmission. 2. ath12k_mac_op_flush() gets called to flush pending frames associated with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush() the process waits for the transmission done. 3. Since wiphy lock has been taken by the flush process, the transmission work item has no chance to run, hence the dead lock. >From user view, this dead lock results in below issue: wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticated wlp8s0: associate with xxxxxx (try 1/3) wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING) ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1 The dead lock can be avoided by invoking wiphy_work_flush() to proactively run the queued work item. Note actually it is already present in ath12k_mac_op_flush(), however it does not protect the case where vif being NULL. Hence move it ahead to cover this case as well. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23131
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names The hp-bioscfg driver attempts to register kobjects with empty names when the HP BIOS returns attributes with empty name strings. This causes multiple kernel warnings: kobject: (00000000135fb5e6): attempted to be registered with empty name! WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310 Add validation in hp_init_bios_buffer_attribute() to check if the attribute name is empty after parsing it from the WMI buffer. If empty, log a debug message and skip registration of that attribute, allowing the module to continue processing other valid attributes.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23132
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: synopsys: dw-dp: fix error paths of dw_dp_bind Fix several issues in dw_dp_bind() error handling: 1. Missing return after drm_bridge_attach() failure - the function continued execution instead of returning an error. 2. Resource leak: drm_dp_aux_register() is not a devm function, so drm_dp_aux_unregister() must be called on all error paths after aux registration succeeds. This affects errors from: - drm_bridge_attach() - phy_init() - devm_add_action_or_reset() - platform_get_irq() - devm_request_threaded_irq() 3. Bug fix: platform_get_irq() returns the IRQ number or a negative error code, but the error path was returning ERR_PTR(ret) instead of ERR_PTR(dp->irq). Use a goto label for cleanup to ensure consistent error handling.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23133
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: fix dma_free_coherent() pointer dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23134
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: slab: fix kmalloc_nolock() context check for PREEMPT_RT On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ context, but misses the case where preemption is disabled. When a BPF program runs from a tracepoint with preemption disabled (preempt_count > 0), kmalloc_nolock() proceeds to call local_lock_irqsave() which attempts to acquire a sleeping lock, triggering: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128 preempt_count: 2, expected: 0 Fix this by checking !preemptible() on PREEMPT_RT, which directly expresses the constraint that we cannot take a sleeping lock when preemption is disabled. This encompasses the previous checks for NMI and hard IRQ contexts while also catching cases where preemption is disabled.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23135
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dma_free_coherent() pointer dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23146
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling hci_uart_register_dev(), which calls proto->open() to initialize hu->priv. However, if a TTY write wakeup occurs during this window, hci_uart_tx_wakeup() may schedule write_work before hu->priv is initialized, leading to a NULL pointer dereference in hci_uart_write_work() when proto->dequeue() accesses hu->priv. The race condition is: CPU0 CPU1 ---- ---- hci_uart_set_proto() set_bit(HCI_UART_PROTO_INIT) hci_uart_register_dev() tty write wakeup hci_uart_tty_wakeup() hci_uart_tx_wakeup() schedule_work(&hu->write_work) proto->open(hu) // initializes hu->priv hci_uart_write_work() hci_uart_dequeue() proto->dequeue(hu) // accesses hu->priv (NULL!) Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open() succeeds, ensuring hu->priv is initialized before any work can be scheduled.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23147
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: zlib: fix the folio leak on S390 hardware acceleration [BUG] After commit aa60fe12b4f4 ("btrfs: zlib: refactor S390x HW acceleration buffer preparation"), we no longer release the folio of the page cache of folio returned by btrfs_compress_filemap_get_folio() for S390 hardware acceleration path. [CAUSE] Before that commit, we call kumap_local() and folio_put() after handling each folio. Although the timing is not ideal (it release previous folio at the beginning of the loop, and rely on some extra cleanup out of the loop), it at least handles the folio release correctly. Meanwhile the refactored code is easier to read, it lacks the call to release the filemap folio. [FIX] Add the missing folio_put() for copy_data_into_buffer().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23148
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix race in nvmet_bio_done() leading to NULL pointer dereference There is a race condition in nvmet_bio_done() that can cause a NULL pointer dereference in blk_cgroup_bio_start(): 1. nvmet_bio_done() is called when a bio completes 2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req) 3. The queue_response callback can re-queue and re-submit the same request 4. The re-submission reuses the same inline_bio from nvmet_req 5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete) invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL 6. The re-submitted bio enters submit_bio_noacct_nocheck() 7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash: BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode RIP: 0010:blk_cgroup_bio_start+0x10/0xd0 Call Trace: submit_bio_noacct_nocheck+0x44/0x250 nvmet_bdev_execute_rw+0x254/0x370 [nvmet] process_one_work+0x193/0x3c0 worker_thread+0x281/0x3a0 Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put() BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before the request can be re-submitted, preventing the race condition.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23149
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm: Do not allow userspace to trigger kernel warnings in drm_gem_change_handle_ioctl() Since GEM bo handles are u32 in the uapi and the internal implementation uses idr_alloc() which uses int ranges, passing a new handle larger than INT_MAX trivially triggers a kernel warning: idr_alloc(): ... if (WARN_ON_ONCE(start < 0)) return -EINVAL; ... Fix it by rejecting new handles above INT_MAX and at the same time make the end limit calculation more obvious by moving into int domain.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23150
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame(). syzbot reported various memory leaks related to NFC, struct nfc_llcp_sock, sk_buff, nfc_dev, etc. [0] The leading log hinted that nfc_llcp_send_ui_frame() failed to allocate skb due to sock_error(sk) being -ENXIO. ENXIO is set by nfc_llcp_socket_release() when struct nfc_llcp_local is destroyed by local_cleanup(). The problem is that there is no synchronisation between nfc_llcp_send_ui_frame() and local_cleanup(), and skb could be put into local->tx_queue after it was purged in local_cleanup(): CPU1 CPU2 ---- ---- nfc_llcp_send_ui_frame() local_cleanup() |- do { ' |- pdu = nfc_alloc_send_skb(..., &err) | . | |- nfc_llcp_socket_release(local, false, ENXIO); | |- skb_queue_purge(&local->tx_queue); | | ' | |- skb_queue_tail(&local->tx_queue, pdu); | ... | |- pdu = nfc_alloc_send_skb(..., &err) | ^._________________________________.' local_cleanup() is called for struct nfc_llcp_local only after nfc_llcp_remove_local() unlinks it from llcp_devices. If we hold local->tx_queue.lock then, we can synchronise the thread and nfc_llcp_send_ui_frame(). Let's do that and check list_empty(&local->list) before queuing skb to local->tx_queue in nfc_llcp_send_ui_frame(). [0]: [ 56.074943][ T6096] llcp: nfc_llcp_send_ui_frame: Could not allocate PDU (error=-6) [ 64.318868][ T5813] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak) BUG: memory leak unreferenced object 0xffff8881272f6800 (size 1024): comm "syz.0.17", pid 6096, jiffies 4294942766 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 03 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc da58d84d): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x3e3/0x6b0 mm/slub.c:5658 kmalloc_noprof include/linux/slab.h:961 [inline] sk_prot_alloc+0x11a/0x1b0 net/core/sock.c:2239 sk_alloc+0x36/0x360 net/core/sock.c:2295 nfc_llcp_sock_alloc+0x37/0x130 net/nfc/llcp_sock.c:979 llcp_sock_create+0x71/0xd0 net/nfc/llcp_sock.c:1044 nfc_sock_create+0xc9/0xf0 net/nfc/af_nfc.c:31 __sock_create+0x1a9/0x340 net/socket.c:1605 sock_create net/socket.c:1663 [inline] __sys_socket_create net/socket.c:1700 [inline] __sys_socket+0xb9/0x1a0 net/socket.c:1747 __do_sys_socket net/socket.c:1761 [inline] __se_sys_socket net/socket.c:1759 [inline] __x64_sys_socket+0x1b/0x30 net/socket.c:1759 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f BUG: memory leak unreferenced object 0xffff88810fbd9800 (size 240): comm "syz.0.17", pid 6096, jiffies 4294942850 hex dump (first 32 bytes): 68 f0 ff 08 81 88 ff ff 68 f0 ff 08 81 88 ff ff h.......h....... 00 00 00 00 00 00 00 00 00 68 2f 27 81 88 ff ff .........h/'.... backtrace (crc 6cc652b1): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5336 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/sk ---truncated---

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23151
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix memory leak in set_ssp_complete Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures are not freed after being removed from the pending list. Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced mgmt_pending_foreach() calls with individual command handling but missed adding mgmt_pending_free() calls in both error and success paths of set_ssp_complete(). Other completion functions like set_le_complete() were fixed correctly in the same commit. This causes a memory leak of the mgmt_pending_cmd structure and its associated parameter data for each SSP command that completes. Add the missing mgmt_pending_free(cmd) calls in both code paths to fix the memory leak. Also fix the same issue in set_advertising_complete().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23152
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: correctly decode TTLM with default link map TID-To-Link Mapping (TTLM) elements do not contain any link mapping presence indicator if a default mapping is used and parsing needs to be skipped. Note that access points should not explicitly report an advertised TTLM with a default mapping as that is the implied mapping if the element is not included, this is even the case when switching back to the default mapping. However, mac80211 would incorrectly parse the frame and would also read one byte beyond the end of the element.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23153
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition against transaction list The list of transaction is enumerated without acquiring card lock when processing AR response event. This causes a race condition bug when processing AT request completion event concurrently. This commit fixes the bug by put timer start for split transaction expiration into the scope of lock. The value of jiffies in card structure is referred before acquiring the lock.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23154
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: fix segmentation of forwarding fraglist GRO This patch enhances GSO segment handling by properly checking the SKB_GSO_DODGY flag for frag_list GSO packets, addressing low throughput issues observed when a station accesses IPv4 servers via hotspots with an IPv6-only upstream interface. Specifically, it fixes a bug in GSO segmentation when forwarding GRO packets containing a frag_list. The function skb_segment_list cannot correctly process GRO skbs that have been converted by XLAT, since XLAT only translates the header of the head skb. Consequently, skbs in the frag_list may remain untranslated, resulting in protocol inconsistencies and reduced throughput. To address this, the patch explicitly sets the SKB_GSO_DODGY flag for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers (bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO packets as potentially modified after protocol translation. As a result, GSO segmentation will avoid using skb_segment_list and instead falls back to skb_segment for packets with the SKB_GSO_DODGY flag. This ensures that only safe and fully translated frag_list packets are processed by skb_segment_list, resolving protocol inconsistencies and improving throughput when forwarding GRO packets converted by XLAT.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23156
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: efivarfs: fix error propagation in efivar_entry_get() efivar_entry_get() always returns success even if the underlying __efivar_entry_get() fails, masking errors. This may result in uninitialized heap memory being copied to userspace in the efivarfs_file_read() path. Fix it by returning the error from __efivar_entry_get().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23157
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not strictly require dirty metadata threshold for metadata writepages [BUG] There is an internal report that over 1000 processes are waiting at the io_schedule_timeout() of balance_dirty_pages(), causing a system hang and trigger a kernel coredump. The kernel is v6.4 kernel based, but the root problem still applies to any upstream kernel before v6.18. [CAUSE] From Jan Kara for his wisdom on the dirty page balance behavior first. This cgroup dirty limit was what was actually playing the role here because the cgroup had only a small amount of memory and so the dirty limit for it was something like 16MB. Dirty throttling is responsible for enforcing that nobody can dirty (significantly) more dirty memory than there's dirty limit. Thus when a task is dirtying pages it periodically enters into balance_dirty_pages() and we let it sleep there to slow down the dirtying. When the system is over dirty limit already (either globally or within a cgroup of the running task), we will not let the task exit from balance_dirty_pages() until the number of dirty pages drops below the limit. So in this particular case, as I already mentioned, there was a cgroup with relatively small amount of memory and as a result with dirty limit set at 16MB. A task from that cgroup has dirtied about 28MB worth of pages in btrfs btree inode and these were practically the only dirty pages in that cgroup. So that means the only way to reduce the dirty pages of that cgroup is to writeback the dirty pages of btrfs btree inode, and only after that those processes can exit balance_dirty_pages(). Now back to the btrfs part, btree_writepages() is responsible for writing back dirty btree inode pages. The problem here is, there is a btrfs internal threshold that if the btree inode's dirty bytes are below the 32M threshold, it will not do any writeback. This behavior is to batch as much metadata as possible so we won't write back those tree blocks and then later re-COW them again for another modification. This internal 32MiB is higher than the existing dirty page size (28MiB), meaning no writeback will happen, causing a deadlock between btrfs and cgroup: - Btrfs doesn't want to write back btree inode until more dirty pages - Cgroup/MM doesn't want more dirty pages for btrfs btree inode Thus any process touching that btree inode is put into sleep until the number of dirty pages is reduced. Thanks Jan Kara a lot for the analysis of the root cause. [ENHANCEMENT] Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the btree_inode"), btrfs btree inode pages will only be charged to the root cgroup which should have a much larger limit than btrfs' 32MiB threshold. So it should not affect newer kernels. But for all current LTS kernels, they are all affected by this problem, and backporting the whole AS_KERNEL_FILE may not be a good idea. Even for newer kernels I still think it's a good idea to get rid of the internal threshold at btree_writepages(), since for most cases cgroup/MM has a better view of full system memory usage than btrfs' fixed threshold. For internal callers using btrfs_btree_balance_dirty() since that function is already doing internal threshold check, we don't need to bother them. But for external callers of btree_writepages(), just respect their requests and write back whatever they want, ignoring the internal btrfs threshold to avoid such deadlock on btree inode dirty page balancing.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23158
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23159
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: perf: sched: Fix perf crash with new is_user_task() helper In order to do a user space stacktrace the current task needs to be a user task that has executed in user space. It use to be possible to test if a task is a user task or not by simply checking the task_struct mm field. If it was non NULL, it was a user task and if not it was a kernel task. But things have changed over time, and some kernel tasks now have their own mm field. An idea was made to instead test PF_KTHREAD and two functions were used to wrap this check in case it became more complex to test if a task was a user task or not[1]. But this was rejected and the C code simply checked the PF_KTHREAD directly. It was later found that not all kernel threads set PF_KTHREAD. The io-uring helpers instead set PF_USER_WORKER and this needed to be added as well. But checking the flags is still not enough. There's a very small window when a task exits that it frees its mm field and it is set back to NULL. If perf were to trigger at this moment, the flags test would say its a user space task but when perf would read the mm field it would crash with at NULL pointer dereference. Now there are flags that can be used to test if a task is exiting, but they are set in areas that perf may still want to profile the user space task (to see where it exited). The only real test is to check both the flags and the mm field. Instead of making this modification in every location, create a new is_user_task() helper function that does all the tests needed to know if it is safe to read the user space memory or not. [1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23160
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix memory leak in octep_device_setup() In octep_device_setup(), if octep_ctrl_net_init() fails, the function returns directly without unmapping the mapped resources and freeing the allocated configuration memory. Fix this by jumping to the unsupported_dev label, which performs the necessary cleanup. This aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23161
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix race of truncate and swap entry split The helper for shmem swap freeing is not handling the order of swap entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it gets the entry order before that using xa_get_order without lock protection, and it may get an outdated order value if the entry is split or changed in other ways after the xa_get_order and before the xa_cmpxchg_irq. And besides, the order could grow and be larger than expected, and cause truncation to erase data beyond the end border. For example, if the target entry and following entries are swapped in or freed, then a large folio was added in place and swapped out, using the same entry, the xa_cmpxchg_irq will still succeed, it's very unlikely to happen though. To fix that, open code the Xarray cmpxchg and put the order retrieval and value checking in the same critical section. Also, ensure the order won't exceed the end border, skip it if the entry goes across the border. Skipping large swap entries crosses the end border is safe here. Shmem truncate iterates the range twice, in the first iteration, find_lock_entries already filtered such entries, and shmem will swapin the entries that cross the end border and partially truncate the folio (split the folio or at least zero part of it). So in the second loop here, if we see a swap entry that crosses the end order, it must at least have its content erased already. I observed random swapoff hangs and kernel panics when stress testing ZSWAP with shmem. After applying this patch, all problems are gone.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23162
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/xe/nvm: Fix double-free on aux add failure After a successful auxiliary_device_init(), aux_dev->dev.release (xe_nvm_release_dev()) is responsible for the kfree(nvm). When there is failure with auxiliary_device_add(), driver will call auxiliary_device_uninit(), which call put_device(). So that the .release callback will be triggered to free the memory associated with the auxiliary_device. Move the kfree(nvm) into the auxiliary_device_init() failure path and remove the err goto path to fix below error. " [ 13.232905] ================================================================== [ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe] [ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273 [ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary) ... [ 13.233125] Call Trace: [ 13.233126] [ 13.233127] dump_stack_lvl+0x7f/0xc0 [ 13.233132] print_report+0xce/0x610 [ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0 [ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe] ... " v2: drop err goto path. (Alexander) (cherry picked from commit a3187c0c2bbd947ffff97f90d077ac88f9c2a215)

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23163
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and ih2 interrupt ring buffers are not initialized. This is by design, as these secondary IH rings are only available on discrete GPUs. See vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when AMD_IS_APU is set. However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to get the timestamp of the last interrupt entry. When retry faults are enabled on APUs (noretry=0), this function is called from the SVM page fault recovery path, resulting in a NULL pointer dereference when amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[]. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000004 RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu] Call Trace: amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu] svm_range_restore_pages+0xae5/0x11c0 [amdgpu] amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu] gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu] amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu] amdgpu_ih_process+0x84/0x100 [amdgpu] This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW IP 9.3.0 from noretry=1") which changed the default for Renoir APU from noretry=1 to noretry=0, enabling retry fault handling and thus exercising the buggy code path. Fix this by adding a check for ih1.ring_size before attempting to use it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu: Rework retry fault removal"). This is needed if the hardware doesn't support secondary HW IH rings. v2: additional updates (Alex) (cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526)

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23164
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rocker: fix memory leak in rocker_world_port_post_fini() In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with kzalloc(wops->port_priv_size, GFP_KERNEL). However, in rocker_world_port_post_fini(), the memory is only freed when wops->port_post_fini callback is set: if (!wops->port_post_fini) return; wops->port_post_fini(rocker_port); kfree(rocker_port->wpriv); Since rocker_ofdpa_ops does not implement port_post_fini callback (it is NULL), the wpriv memory allocated for each port is never freed when ports are removed. This leads to a memory leak of sizeof(struct ofdpa_port) bytes per port on every device removal. Fix this by always calling kfree(rocker_port->wpriv) regardless of whether the port_post_fini callback exists.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23165
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: sfc: fix deadlock in RSS config read Since cited commit, core locks the net_device's rss_lock when handling ethtool -x command, so driver's implementation should not lock it again. Remove the latter.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23166
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes during resume from suspend when rings[q_idx]->q_vector is NULL. Tested adaptor: 60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003] SR-IOV state: both disabled and enabled can reproduce this issue. kernel version: v6.18 Reproduce steps: Boot up and execute suspend like systemctl suspend or rtcwake. Log: <1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040 <1>[ 231.444052] #PF: supervisor read access in kernel mode <1>[ 231.444484] #PF: error_code(0x0000) - not-present page <6>[ 231.444913] PGD 0 P4D 0 <4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI <4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170 <4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89 <4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202 <4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010 <4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000 <4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000 <4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 <4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000 <4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000 <4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0 <4>[ 231.451629] PKRU: 55555554 <4>[ 231.452076] Call Trace: <4>[ 231.452549] <4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice] <4>[ 231.453482] ice_resume+0xfd/0x220 [ice] <4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.454425] pci_pm_resume+0x8c/0x140 <4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.455347] dpm_run_callback+0x5f/0x160 <4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170 <4>[ 231.456244] device_resume+0x177/0x270 <4>[ 231.456708] dpm_resume+0x209/0x2f0 <4>[ 231.457151] dpm_resume_end+0x15/0x30 <4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0 <4>[ 231.458054] enter_state+0x10e/0x570 Add defensive checks for both the ring pointer and its q_vector before dereferencing, allowing the system to resume successfully even when q_vectors are unmapped.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23167
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix race between rfkill and nci_unregister_device(). syzbot reported the splat below [0] without a repro. It indicates that struct nci_dev.cmd_wq had been destroyed before nci_close_device() was called via rfkill. nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which (I think) was called from virtual_ncidev_close() when syzbot close()d an fd of virtual_ncidev. The problem is that nci_unregister_device() destroys nci_dev.cmd_wq first and then calls nfc_unregister_device(), which removes the device from rfkill by rfkill_unregister(). So, the device is still visible via rfkill even after nci_dev.cmd_wq is destroyed. Let's unregister the device from rfkill first in nci_unregister_device(). Note that we cannot call nfc_unregister_device() before nci_close_device() because 1) nfc_unregister_device() calls device_del() which frees all memory allocated by devm_kzalloc() and linked to ndev->conn_info_list 2) nci_rx_work() could try to queue nci_conn_info to ndev->conn_info_list which could be leaked Thus, nfc_unregister_device() is split into two functions so we can remove rfkill interfaces only before nci_close_device(). [0]: DEBUG_LOCKS_WARN_ON(1) WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349 Modules linked in: CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline] RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187 Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f RSP: 0018:ffffc9000c767680 EFLAGS: 00010046 RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000 RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0 RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4 R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2 R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30 FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0 Call Trace: lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868 touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940 __flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982 nci_close_device+0x302/0x630 net/nfc/nci/core.c:567 nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639 nfc_dev_down+0x152/0x290 net/nfc/core.c:161 nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179 rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346 rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301 vfs_write+0x29a/0xb90 fs/read_write.c:684 ksys_write+0x150/0x270 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa59b39acb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9 RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007 RBP: 00007fa59b408bf7 R08: ---truncated---

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23168
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: flex_proportions: make fprop_new_period() hardirq safe Bernd has reported a lockdep splat from flexible proportions code that is essentially complaining about the following race: run_timer_softirq - we are in softirq context call_timer_fn writeout_period fprop_new_period write_seqcount_begin(&p->sequence); ... blk_mq_end_request() blk_update_request() ext4_end_bio() folio_end_writeback() __wb_writeout_add() __fprop_add_percpu_max() if (unlikely(max_frac < FPROP_FRAC_BASE)) { fprop_fraction_percpu() seq = read_seqcount_begin(&p->sequence); - sees odd sequence so loops indefinitely Note that a deadlock like this is only possible if the bdi has configured maximum fraction of writeout throughput which is very rare in general but frequent for example for FUSE bdis. To fix this problem we have to make sure write section of the sequence counter is irqsafe.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23169
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race in mptcp_pm_nl_flush_addrs_doit() syzbot and Eulgyu Kim reported crashes in mptcp_pm_nl_get_local_id() and/or mptcp_pm_nl_is_backup() Root cause is list_splice_init() in mptcp_pm_nl_flush_addrs_doit() which is not RCU ready. list_splice_init_rcu() can not be called here while holding pernet->lock spinlock. Many thanks to Eulgyu Kim for providing a repro and testing our patches.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23170
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/imx/tve: fix probe device leak Make sure to drop the reference taken to the DDC device during probe on probe failure (e.g. probe deferral) and on driver unbind.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23171
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bonding: fix use-after-free due to enslave fail after slave array update Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding]

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23172
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: fix potential skb->frags overflow in RX path When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Malicious, buggy, or compromised firmware could potentially craft packets with more fragments than the kernel expects. Fix this by adding a bounds check before calling skb_add_rx_frag() to ensure nr_frags does not exceed MAX_SKB_FRAGS. The check must be performed before unmapping to avoid a page leak and double DMA unmap during device teardown.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23173
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, delete flows only for existing peers When deleting TC steering flows, iterate only over actual devcom peers instead of assuming all possible ports exist. This avoids touching non-existent peers and ensures cleanup is limited to devices the driver is currently connected to. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 133c8a067 P4D 0 Oops: Oops: 0002 [#1] SMP CPU: 19 UID: 0 PID: 2169 Comm: tc Not tainted 6.18.0+ #156 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0xbe/0x200 [mlx5_core] Code: 00 00 a8 08 74 a8 49 8b 46 18 f6 c4 02 74 9f 4c 8d bf a0 12 00 00 4c 89 ff e8 0e e7 96 e1 49 8b 44 24 08 49 8b 0c 24 4c 89 ff <48> 89 41 08 48 89 08 49 89 2c 24 49 89 5c 24 08 e8 7d ce 96 e1 49 RSP: 0018:ff11000143867528 EFLAGS: 00010246 RAX: 0000000000000000 RBX: dead000000000122 RCX: 0000000000000000 RDX: ff11000143691580 RSI: ff110001026e5000 RDI: ff11000106f3d2a0 RBP: dead000000000100 R08: 00000000000003fd R09: 0000000000000002 R10: ff11000101c75690 R11: ff1100085faea178 R12: ff11000115f0ae78 R13: 0000000000000000 R14: ff11000115f0a800 R15: ff11000106f3d2a0 FS: 00007f35236bf740(0000) GS:ff110008dc809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000157a01001 CR4: 0000000000373eb0 Call Trace: mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] mlx5e_flow_put+0x25/0x50 [mlx5_core] mlx5e_delete_flower+0x2a6/0x3e0 [mlx5_core] tc_setup_cb_reoffload+0x20/0x80 fl_reoffload+0x26f/0x2f0 [cls_flower] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] tcf_block_playback_offloads+0x9e/0x1c0 tcf_block_unbind+0x7b/0xd0 tcf_block_setup+0x186/0x1d0 tcf_block_offload_cmd.isra.0+0xef/0x130 tcf_block_offload_unbind+0x43/0x70 __tcf_block_put+0x85/0x160 ingress_destroy+0x32/0x110 [sch_ingress] __qdisc_destroy+0x44/0x100 qdisc_graft+0x22b/0x610 tc_get_qdisc+0x183/0x4d0 rtnetlink_rcv_msg+0x2d7/0x3d0 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x249/0x320 ? __alloc_skb+0x102/0x1f0 netlink_sendmsg+0x1e3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1ef/0x230 ? copy_msghdr_from_user+0x6c/0xa0 ___sys_sendmsg+0x7f/0xc0 ? ___sys_recvmsg+0x8a/0xc0 ? __sys_sendto+0x119/0x180 __sys_sendmsg+0x61/0xb0 do_syscall_64+0x55/0x640 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f35238bb764 Code: 15 b9 86 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d e5 08 0d 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffed4c35638 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a2efcc75e0 RCX: 00007f35238bb764 RDX: 0000000000000000 RSI: 00007ffed4c356a0 RDI: 0000000000000003 RBP: 00007ffed4c35710 R08: 0000000000000010 R09: 00007f3523984b20 R10: 0000000000000004 R11: 0000000000000202 R12: 00007ffed4c35790 R13: 000000006947df8f R14: 000055a2efcc75e0 R15: 00007ffed4c35780

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23184
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_netlink_report() Oneway transactions sent to frozen targets via binder_proc_transaction() return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated as successful since the target is expected to thaw at some point. It is then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors as the transaction could have been consumed by the now thawed target. This is the case for binder_netlink_report() which derreferences 't' after a pending frozen error, as pointed out by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8 Read of size 8 at addr ffff00000f98ba38 by task binder-util/522 CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_netlink_report.isra.0+0x694/0x6c8 binder_transaction+0x66e4/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Allocated by task 522: __kmalloc_cache_noprof+0x17c/0x50c binder_transaction+0x584/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Freed by task 488: kfree+0x1d0/0x420 binder_free_transaction+0x150/0x234 binder_thread_read+0x2d08/0x3ce4 binder_ioctl+0x488/0x2940 [...] ================================================================== Instead, make a transaction copy so the data can be safely accessed by binder_netlink_report() after a pending frozen error. While here, add a comment about not using t->buffer in binder_netlink_report().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23185
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: cancel mlo_scan_start_wk mlo_scan_start_wk is not canceled on disconnection. In fact, it is not canceled anywhere except in the restart cleanup, where we don't really have to. This can cause an init-after-queue issue: if, for example, the work was queued and then drv_change_interface got executed. This can also cause use-after-free: if the work is executed after the vif is freed.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23186
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify() The acpi_power_meter driver's .notify() callback function, acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock that is also acquired by callbacks in sysfs attributes of the device being unregistered which is prone to deadlocks between sysfs access and device removal. Address this by moving the hwmon device removal in acpi_power_meter_notify() outside the lock in question, but notice that doing it alone is not sufficient because two concurrent METER_NOTIFY_CONFIG notifications may be attempting to remove the same device at the same time. To prevent that from happening, add a new lock serializing the execution of the switch () statement in acpi_power_meter_notify(). For simplicity, it is a static mutex which should not be a problem from the performance perspective. The new lock also allows the hwmon_device_register_with_info() in acpi_power_meter_notify() to be called outside the inner lock because it prevents the other notifications handled by that function from manipulating the "resource" object while the hwmon device based on it is being registered. The sending of ACPI netlink messages from acpi_power_meter_notify() is serialized by the new lock too which generally helps to ensure that the order of handling firmware notifications is the same as the order of sending netlink messages related to them. In addition, notice that hwmon_device_register_with_info() may fail in which case resource->hwmon_dev will become an error pointer, so add checks to avoid attempting to unregister the hwmon device pointer to by it in that case to acpi_power_meter_notify() and acpi_power_meter_remove().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23187
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove().

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23188
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: r8152: fix resume reset deadlock rtl8152 can trigger device reset during reset which potentially can result in a deadlock: **** DPM device timeout after 10 seconds; 15 seconds until panic **** Call Trace: schedule+0x483/0x1370 schedule_preempt_disabled+0x15/0x30 __mutex_lock_common+0x1fd/0x470 __rtl8152_set_mac_address+0x80/0x1f0 dev_set_mac_address+0x7f/0x150 rtl8152_post_reset+0x72/0x150 usb_reset_device+0x1d0/0x220 rtl8152_resume+0x99/0xc0 usb_resume_interface+0x3e/0xc0 usb_resume_both+0x104/0x150 usb_resume+0x22/0x110 The problem is that rtl8152 resume calls reset under tp->control mutex while reset basically re-enters rtl8152 and attempts to acquire the same tp->control lock once again. Reset INACCESSIBLE device outside of tp->control mutex scope to avoid recursive mutex_lock() deadlock.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23189
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ceph: fix NULL pointer dereference in ceph_mds_auth_match() The CephFS kernel client has regression starting from 6.18-rc1. We have issue in ceph_mds_auth_match() if fs_name == NULL: const char fs_name = mdsc->fsc->mount_options->mds_namespace; ... if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) { / fsname mismatch, try next one */ return 0; } Patrick Donnelly suggested that: In summary, we should definitely start decoding `fs_name` from the MDSMap and do strict authorizations checks against it. Note that the `-o mds_namespace=foo` should only be used for selecting the file system to mount and nothing else. It's possible no mds_namespace is specified but the kernel will mount the only file system that exists which may have name "foo". This patch reworks ceph_mdsmap_decode() and namespace_equals() with the goal of supporting the suggested concept. Now struct ceph_mdsmap contains m_fs_name field that receives copy of extracted FS name by ceph_extract_encoded_string(). For the case of "old" CephFS file systems, it is used "cephfs" name. [ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(), get rid of a series of strlen() calls in ceph_namespace_match(), drop changes to namespace_equals() body to avoid treating empty mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap() as namespace_equals() isn't an equivalent substitution there ]

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23190
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: fix memory leak in acp3x pdm dma ops

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23191
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch changes two things: - It covers the most of code in loopback_check_format() with cable->lock spinlock, and add the proper NULL checks. This avoids already some racy accesses. - In addition, now we try to check the state of the capture PCM stream that may be stopped in this function, which was the major pain point leading to UAF.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23192
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: linkwatch: use __dev_put() in callers to prevent UAF After linkwatch_do_dev() calls __dev_put() to release the linkwatch reference, the device refcount may drop to 1. At this point, netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an empty list and returns without blocking), wait for the refcount to become 1 via netdev_wait_allrefs_any(), and then free the device via kobject_put(). This creates a use-after-free when __linkwatch_run_queue() tries to call netdev_unlock_ops() on the already-freed device. Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in netdev_run_todo() before kobject_put() would not work, because netdev_lock_ops() is conditional - it only locks when netdev_need_ops_lock() returns true. If the device doesn't require ops_lock, linkwatch won't hold any lock, and netdev_run_todo() acquiring the lock won't provide synchronization. Fix this by moving __dev_put() from linkwatch_do_dev() to its callers. The device reference logically pairs with de-listing the device, so it's reasonable for the caller that did the de-listing to release it. This allows placing __dev_put() after all device accesses are complete, preventing UAF. The bug can be reproduced by adding mdelay(2000) after linkwatch_do_dev() in __linkwatch_run_queue(), then running: ip tuntap add mode tun name tun_test ip link set tun_test up ip link set tun_test carrier off ip link set tun_test carrier on sleep 0.5 ip tuntap del mode tun name tun_test KASAN report: ================================================================== BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline] BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123 CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events_unbound linkwatch_event Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x156/0x4c9 mm/kasan/report.c:482 kasan_report+0xdf/0x1a0 mm/kasan/report.c:595 netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] netdev_unlock_ops include/net/netdev_lock.h:47 [inline] __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304 process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x5da/0xe40 kernel/workqueue.c:3421 kthread+0x3b3/0x730 kernel/kthread.c:463 ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 ==================================================================

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23193
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count() In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23194
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: rust_binder: correctly handle FDA objects of length zero Fix a bug where an empty FDA (fd array) object with 0 fds would cause an out-of-bounds error. The previous implementation used `skip == 0` to mean "this is a pointer fixup", but 0 is also the correct skip length for an empty FDA. If the FDA is at the end of the buffer, then this results in an attempt to write 8-bytes out of bounds. This is caught and results in an EINVAL error being returned to userspace. The pattern of using `skip == 0` as a special value originates from the C-implementation of Binder. As part of fixing this bug, this pattern is replaced with a Rust enum. I considered the alternate option of not pushing a fixup when the length is zero, but I think it's cleaner to just get rid of the zero-is-special stuff. The root cause of this bug was diagnosed by Gemini CLI on first try. I used the following prompt: > There appears to be a bug in @drivers/android/binder/thread.rs where > the Fixups oob bug is triggered with 316 304 316 324. This implies > that we somehow ended up with a fixup where buffer A has a pointer to > buffer B, but the pointer is located at an index in buffer A that is > out of bounds. Please investigate the code to find the bug. You may > compare with @drivers/android/binder.c that implements this correctly.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23195
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: cgroup/dmem: avoid pool UAF An UAF issue was observed: BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150 Write of size 8 at addr ffff888106715440 by task insmod/527 CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11 Tainted: [O]=OOT_MODULE Call Trace: dump_stack_lvl+0x82/0xd0 kasan_report+0xca/0x100 kasan_check_range+0x39/0x1c0 page_counter_uncharge+0x65/0x150 dmem_cgroup_uncharge+0x1f/0x260 Allocated by task 527: Freed by task 0: The buggy address belongs to the object at ffff888106715400 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 64 bytes inside of freed 512-byte region [ffff888106715400, ffff888106715600) The buggy address belongs to the physical page: Memory state around the buggy address: ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb The issue occurs because a pool can still be held by a caller after its associated memory region is unregistered. The current implementation frees the pool even if users still hold references to it (e.g., before uncharge operations complete). This patch adds a reference counter to each pool, ensuring that a pool is only freed when its reference count drops to zero.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23196
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer Add DMA buffer readiness check before reading DMA buffer to avoid unexpected NULL pointer accessing.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23197
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: preserve error state in block data length handler When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX, the length handler sets the state to IMX_I2C_STATE_FAILED. However, i2c_imx_master_isr() unconditionally overwrites this with IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns buffers and crashes the system. Guard the state transition to preserve error states set by the length handler.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23198
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated---

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23199
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: procfs: avoid fetching build ID while holding VMA lock Fix PROCMAP_QUERY to fetch optional build ID only after dropping mmap_lock or per-VMA lock, whichever was used to lock VMA under question, to avoid deadlock reported by syzbot: -> #1 (&mm->mmap_lock){++++}-{4:4}: __might_fault+0xed/0x170 _copy_to_iter+0x118/0x1720 copy_page_to_iter+0x12d/0x1e0 filemap_read+0x720/0x10a0 blkdev_read_iter+0x2b5/0x4e0 vfs_read+0x7f4/0xae0 ksys_read+0x12a/0x250 do_syscall_64+0xcb/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&sb->s_type->i_mutex_key#8){++++}-{4:4}: __lock_acquire+0x1509/0x26d0 lock_acquire+0x185/0x340 down_read+0x98/0x490 blkdev_read_iter+0x2a7/0x4e0 __kernel_read+0x39a/0xa90 freader_fetch+0x1d5/0xa80 __build_id_parse.isra.0+0xea/0x6a0 do_procmap_query+0xd75/0x1050 procfs_procmap_ioctl+0x7a/0xb0 __x64_sys_ioctl+0x18e/0x210 do_syscall_64+0xcb/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(&sb->s_type->i_mutex_key#8); lock(&mm->mmap_lock); rlock(&sb->s_type->i_mutex_key#8); *** DEADLOCK *** This seems to be exacerbated (as we haven't seen these syzbot reports before that) by the recent: 777a8560fd29 ("lib/buildid: use __kernel_read() for sleepable context") To make this safe, we need to grab file refcount while VMA is still locked, but other than that everything is pretty straightforward. Internal build_id_parse() API assumes VMA is passed, but it only needs the underlying file reference, so just add another variant build_id_parse_file() that expects file passed directly. [akpm@linux-foundation.org: fix up kerneldoc]

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23200
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6 route. [0] Commit f72514b3c569 ("ipv6: clear RA flags when adding a static route") introduced logic to clear RTF_ADDRCONF from existing routes when a static route with the same nexthop is added. However, this causes a problem when the existing route has a gateway. When RTF_ADDRCONF is cleared from a route that has a gateway, that route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns true. The issue is that this route was never added to the fib6_siblings list. This leads to a mismatch between the following counts: - The sibling count computed by iterating fib6_next chain, which includes the newly ECMP-eligible route - The actual siblings in fib6_siblings list, which does not include that route When a subsequent ECMP route is added, fib6_add_rt2node() hits BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the counts don't match. Fix this by only clearing RTF_ADDRCONF when the existing route does not have a gateway. Routes without a gateway cannot qualify for ECMP anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing RTF_ADDRCONF on them is safe and matches the original intent of the commit. [0]: kernel BUG at net/ipv6/ip6_fib.c:1217! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217 [...] Call Trace: fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532 __ip6_ins_rt net/ipv6/route.c:1351 [inline] ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946 ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571 inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577 sock_do_ioctl+0xdc/0x300 net/socket.c:1245 sock_ioctl+0x576/0x790 net/socket.c:1366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23201
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ceph: fix oops due to invalid pointer for kfree() in parse_longname() This fixes a kernel oops when reading ceph snapshot directories (.snap), for example by simply running `ls /mnt/my_ceph/.snap`. The variable str is guarded by __free(kfree), but advanced by one for skipping the initial '_' in snapshot names. Thus, kfree() is called with an invalid pointer. This patch removes the need for advancing the pointer so kfree() is called with correct memory pointer. Steps to reproduce: 1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase) 2. Add cephfs mount to fstab $ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab 3. Reboot the system $ systemctl reboot 4. Check if it's really mounted $ mount | grep stuff 5. List snapshots (expected 63 snapshots on my system) $ ls /mnt/test/stuff/.snap Now ls hangs forever and the kernel log shows the oops.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23202
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer The curr_xfer field is read by the IRQ handler without holding the lock to check if a transfer is in progress. When clearing curr_xfer in the combined sequence transfer loop, protect it with the spinlock to prevent a race with the interrupt handler. Protect the curr_xfer clearing at the exit path of tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race with the interrupt handler that reads this field. Without this protection, the IRQ handler could read a partially updated curr_xfer value, leading to NULL pointer dereference or use-after-free.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23203
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this change triggered the following call trace on my BeagleBone Black board: WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496 RTNL: assertion failed at net/8021q/vlan_core.c (236) Modules linked in: CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT Hardware name: Generic AM33XX (Flattened Device Tree) Call trace: unwind_backtrace from show_stack+0x28/0x2c show_stack from dump_stack_lvl+0x30/0x38 dump_stack_lvl from __warn+0xb8/0x11c __warn from warn_slowpath_fmt+0x130/0x194 warn_slowpath_fmt from vlan_for_each+0x120/0x124 vlan_for_each from cpsw_add_mc_addr+0x54/0xd8 cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec __hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88 __dev_mc_add from igmp6_group_added+0x84/0xec igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0 __ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4 __ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168 do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8 ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c do_sock_setsockopt from __sys_setsockopt+0x84/0xac __sys_setsockopt from ret_fast_syscall+0x0/0x5 This trace occurs because vlan_for_each() is called within cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held. Since modifying vlan_for_each() to operate without the RTNL lock is not straightforward, and because ndo_set_rx_mode() is invoked both with and without the RTNL lock across different code paths, simply adding rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution. To resolve this issue, we opt to execute the actual processing within a work queue, following the approach used by the icssg-prueth driver.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23204
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: use skb_header_pointer_careful() skb_header_pointer() does not fully validate negative @offset values. Use skb_header_pointer_careful() instead. GangMin Kim provided a report and a repro fooling u32_classify(): BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0 net/sched/cls_u32.c:221

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23205
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix memory leak in smb2_open_file() Reproducer: 1. server: directories are exported read-only 2. client: mount -t cifs //${server_ip}/export /mnt 3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct 4. client: umount /mnt 5. client: sleep 1 6. client: modprobe -r cifs The error message is as follows: ============================================================================= BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Object 0x00000000d47521be @offset=14336 ... WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577 ... Call Trace: kmem_cache_destroy+0x94/0x190 cifs_destroy_request_bufs+0x3e/0x50 [cifs] cleanup_module+0x4e/0x540 [cifs] __se_sys_delete_module+0x278/0x400 __x64_sys_delete_module+0x5f/0x70 x64_sys_call+0x2299/0x2ff0 do_syscall_64+0x89/0x350 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs] WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23206
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: prevent ZERO_SIZE_PTR dereference when num_ifs is zero The driver allocates arrays for ports, FDBs, and filter blocks using kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the device reports zero interfaces (either due to hardware configuration or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10) instead of NULL. Later in dpaa2_switch_probe(), the NAPI initialization unconditionally accesses ethsw->ports[0]->netdev, which attempts to dereference ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic. Add a check to ensure num_ifs is greater than zero after retrieving device attributes. This prevents the zero-sized allocations and subsequent invalid pointer dereference.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23207
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer check in IRQ handler Now that all other accesses to curr_xfer are done under the lock, protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the spinlock. Without this protection, the following race can occur: CPU0 (ISR thread) CPU1 (timeout path) ---------------- ------------------- if (!tqspi->curr_xfer) // sees non-NULL spin_lock() tqspi->curr_xfer = NULL spin_unlock() handle_*_xfer() spin_lock() t = tqspi->curr_xfer // NULL! ... t->len ... // NULL dereference! With this patch, all curr_xfer accesses are now properly synchronized. Although all accesses to curr_xfer are done under the lock, in tegra_qspi_isr_thread() it checks for NULL, releases the lock and reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer(). There is a potential for an update in between, which could cause a NULL pointer dereference. To handle this, add a NULL check inside the handlers after acquiring the lock. This ensures that if the timeout path has already cleared curr_xfer, the handler will safely return without dereferencing the NULL pointer.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23208
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Prevent excessive number of frames In this case, the user constructed the parameters with maxpacksize 40 for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer size for each data URB is maxpacksize * packets, which in this example is 40 * 6 = 240; When the user performs a write operation to send audio data into the ALSA PCM playback stream, the calculated number of frames is packsize[0] * packets = 264, which exceeds the allocated URB buffer size, triggering the out-of-bounds (OOB) issue reported by syzbot [1]. Added a check for the number of single data URB frames when calculating the number of frames to prevent [1]. [1] BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506 Call Trace: copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611 prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23209
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, ¶ms, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue.

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23210
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: ice: Fix PTP NULL pointer dereference during VSI rebuild Fix race condition where PTP periodic work runs while VSI is being rebuilt, accessing NULL vsi->rx_rings. The sequence was: 1. ice_ptp_prepare_for_reset() cancels PTP work 2. ice_ptp_rebuild() immediately queues PTP work 3. VSI rebuild happens AFTER ice_ptp_rebuild() 4. PTP work runs and accesses NULL vsi->rx_rings Fix: Keep PTP work cancelled during rebuild, only queue it after VSI rebuild completes in ice_rebuild(). Added ice_ptp_queue_work() helper function to encapsulate the logic for queuing PTP work, ensuring it's only queued when PTP is supported and the state is ICE_PTP_READY. Error log: [ 121.392544] ice 0000:60:00.1: PTP reset successful [ 121.392692] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 121.392712] #PF: supervisor read access in kernel mode [ 121.392720] #PF: error_code(0x0000) - not-present page [ 121.392727] PGD 0 [ 121.392734] Oops: Oops: 0000 [#1] SMP NOPTI [ 121.392746] CPU: 8 UID: 0 PID: 1005 Comm: ice-ptp-0000:60 Tainted: G S 6.19.0-rc6+ #4 PREEMPT(voluntary) [ 121.392761] Tainted: [S]=CPU_OUT_OF_SPEC [ 121.392773] RIP: 0010:ice_ptp_update_cached_phctime+0xbf/0x150 [ice] [ 121.393042] Call Trace: [ 121.393047] [ 121.393055] ice_ptp_periodic_work+0x69/0x180 [ice] [ 121.393202] kthread_worker_fn+0xa2/0x260 [ 121.393216] ? __pfx_ice_ptp_periodic_work+0x10/0x10 [ice] [ 121.393359] ? __pfx_kthread_worker_fn+0x10/0x10 [ 121.393371] kthread+0x10d/0x230 [ 121.393382] ? __pfx_kthread+0x10/0x10 [ 121.393393] ret_from_fork+0x273/0x2b0 [ 121.393407] ? __pfx_kthread+0x10/0x10 [ 121.393417] ret_from_fork_asm+0x1a/0x30 [ 121.393432]

Published: 2026-02-14Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23211
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm, swap: restore swap_space attr aviod kernel panic commit 8b47299a411a ("mm, swap: mark swap address space ro and add context debug check") made the swap address space read-only. It may lead to kernel panic if arch_prepare_to_swap returns a failure under heavy memory pressure as follows, el1_abort+0x40/0x64 el1h_64_sync_handler+0x48/0xcc el1h_64_sync+0x84/0x88 errseq_set+0x4c/0xb8 (P) __filemap_set_wb_err+0x20/0xd0 shrink_folio_list+0xc20/0x11cc evict_folios+0x1520/0x1be4 try_to_shrink_lruvec+0x27c/0x3dc shrink_one+0x9c/0x228 shrink_node+0xb3c/0xeac do_try_to_free_pages+0x170/0x4f0 try_to_free_pages+0x334/0x534 __alloc_pages_direct_reclaim+0x90/0x158 __alloc_pages_slowpath+0x334/0x588 __alloc_frozen_pages_noprof+0x224/0x2fc __folio_alloc_noprof+0x14/0x64 vma_alloc_zeroed_movable_folio+0x34/0x44 do_pte_missing+0xad4/0x1040 handle_mm_fault+0x4a4/0x790 do_page_fault+0x288/0x5f8 do_translation_fault+0x38/0x54 do_mem_abort+0x54/0xa8 Restore swap address space as not ro to avoid the panic.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23212
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: bonding: annotate data-races around slave->last_rx slave->last_rx and slave->target_last_arp_rx[...] can be read and written locklessly. Add READ_ONCE() and WRITE_ONCE() annotations. syzbot reported: BUG: KCSAN: data-race in bond_rcv_validate / bond_rcv_validate write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 1: bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335 bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533 __netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039 __netif_receive_skb_one_core net/core/dev.c:6150 [inline] __netif_receive_skb+0x59/0x270 net/core/dev.c:6265 netif_receive_skb_internal net/core/dev.c:6351 [inline] netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410 ... write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 0: bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335 bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533 __netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039 __netif_receive_skb_one_core net/core/dev.c:6150 [inline] __netif_receive_skb+0x59/0x270 net/core/dev.c:6265 netif_receive_skb_internal net/core/dev.c:6351 [inline] netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410 br_netif_receive_skb net/bridge/br_input.c:30 [inline] NF_HOOK include/linux/netfilter.h:318 [inline] ... value changed: 0x0000000100005365 -> 0x0000000100005366

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23213
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Disable MMIO access during SMU Mode 1 reset During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily inaccessible via PCIe. Any attempt to access MMIO registers during this window (e.g., from interrupt handlers or other driver threads) can result in uncompleted PCIe transactions, leading to NMI panics or system hangs. To prevent this, set the `no_hw_access` flag to true immediately after triggering the reset. This signals other driver components to skip register accesses while the device is offline. A memory barrier `smp_mb()` is added to ensure the flag update is globally visible to all cores before the driver enters the sleep/wait state. (cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4)

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23214
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject new transactions if the fs is fully read-only [BUG] There is a bug report where a heavily fuzzed fs is mounted with all rescue mount options, which leads to the following warnings during unmount: BTRFS: Transaction aborted (error -22) Modules linked in: CPU: 0 UID: 0 PID: 9758 Comm: repro.out Not tainted 6.19.0-rc5-00002-gb71e635feefc #7 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:find_free_extent_update_loop fs/btrfs/extent-tree.c:4208 [inline] RIP: 0010:find_free_extent+0x52f0/0x5d20 fs/btrfs/extent-tree.c:4611 Call Trace: btrfs_reserve_extent+0x2cd/0x790 fs/btrfs/extent-tree.c:4705 btrfs_alloc_tree_block+0x1e1/0x10e0 fs/btrfs/extent-tree.c:5157 btrfs_force_cow_block+0x578/0x2410 fs/btrfs/ctree.c:517 btrfs_cow_block+0x3c4/0xa80 fs/btrfs/ctree.c:708 btrfs_search_slot+0xcad/0x2b50 fs/btrfs/ctree.c:2130 btrfs_truncate_inode_items+0x45d/0x2350 fs/btrfs/inode-item.c:499 btrfs_evict_inode+0x923/0xe70 fs/btrfs/inode.c:5628 evict+0x5f4/0xae0 fs/inode.c:837 __dentry_kill+0x209/0x660 fs/dcache.c:670 finish_dput+0xc9/0x480 fs/dcache.c:879 shrink_dcache_for_umount+0xa0/0x170 fs/dcache.c:1661 generic_shutdown_super+0x67/0x2c0 fs/super.c:621 kill_anon_super+0x3b/0x70 fs/super.c:1289 btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2127 deactivate_locked_super+0xbc/0x130 fs/super.c:474 cleanup_mnt+0x425/0x4c0 fs/namespace.c:1318 task_work_run+0x1d4/0x260 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x694/0x22f0 kernel/exit.c:971 do_group_exit+0x21c/0x2d0 kernel/exit.c:1112 __do_sys_exit_group kernel/exit.c:1123 [inline] __se_sys_exit_group kernel/exit.c:1121 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1121 x64_sys_call+0x2210/0x2210 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe8/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x44f639 Code: Unable to access opcode bytes at 0x44f60f. RSP: 002b:00007ffc15c4e088 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00000000004c32f0 RCX: 000000000044f639 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffffffffffc0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004c32f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 Since rescue mount options will mark the full fs read-only, there should be no new transaction triggered. But during unmount we will evict all inodes, which can trigger a new transaction, and triggers warnings on a heavily corrupted fs. [CAUSE] Btrfs allows new transaction even on a read-only fs, this is to allow log replay happen even on read-only mounts, just like what ext4/xfs do. However with rescue mount options, the fs is fully read-only and cannot be remounted read-write, thus in that case we should also reject any new transactions. [FIX] If we find the fs has rescue mount options, we should treat the fs as error, so that no new transaction can be started.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23215
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/vmware: Fix hypercall clobbers Fedora QA reported the following panic: BUG: unable to handle page fault for address: 0000000040003e54 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025 RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90 .. Call Trace: vmmouse_report_events+0x13e/0x1b0 psmouse_handle_byte+0x15/0x60 ps2_interrupt+0x8a/0xd0 ... because the QEMU VMware mouse emulation is buggy, and clears the top 32 bits of %rdi that the kernel kept a pointer in. The QEMU vmmouse driver saves and restores the register state in a "uint32_t data[6];" and as a result restores the state with the high bits all cleared. RDI originally contained the value of a valid kernel stack address (0xff5eeb3240003e54). After the vmware hypercall it now contains 0x40003e54, and we get a page fault as a result when it is dereferenced. The proper fix would be in QEMU, but this works around the issue in the kernel to keep old setups working, when old kernels had not happened to keep any state in %rdi over the hypercall. In theory this same issue exists for all the hypercalls in the vmmouse driver; in practice it has only been seen with vmware_hypercall3() and vmware_hypercall4(). For now, just mark RDI/RSI as clobbered for those two calls. This should have a minimal effect on code generation overall as it should be rare for the compiler to want to make RDI/RSI live across hypercalls.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23216
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count() In iscsit_dec_conn_usage_count(), the function calls complete() while holding the conn->conn_usage_lock. As soon as complete() is invoked, the waiter (such as iscsit_close_connection()) may wake up and proceed to free the iscsit_conn structure. If the waiter frees the memory before the current thread reaches spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function attempts to release a lock within the already-freed connection structure. Fix this by releasing the spinlock before calling complete().

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23217
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: riscv: trace: fix snapshot deadlock with sbi ecall If sbi_ecall.c's functions are traceable, echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter may get the kernel into a deadlock. (Functions in sbi_ecall.c are excluded from tracing if CONFIG_RISCV_ALTERNATIVE_EARLY is set.) __sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code raises an IPI interrupt, which results in another call to __sbi_ecall and another snapshot... All it takes to get into this endless loop is one initial __sbi_ecall. On RISC-V systems without SSTC extension, the clock events in timer-riscv.c issue periodic sbi ecalls, making the problem easy to trigger. Always exclude the sbi_ecall.c functions from tracing to fix the potential deadlock. sbi ecalls can easiliy be logged via trace events, excluding ecall functions from function tracing is not a big limitation.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23218
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gpio: loongson-64bit: Fix incorrect NULL check after devm_kcalloc() Fix incorrect NULL check in loongson_gpio_init_irqchip(). The function checks chip->parent instead of chip->irq.parents.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23219
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/slab: Add alloc_tagging_slab_free_hook for memcg_alloc_abort_single When CONFIG_MEM_ALLOC_PROFILING_DEBUG is enabled, the following warning may be noticed: [ 3959.023862] ------------[ cut here ]------------ [ 3959.023891] alloc_tag was not cleared (got tag for lib/xarray.c:378) [ 3959.023947] WARNING: ./include/linux/alloc_tag.h:155 at alloc_tag_add+0x128/0x178, CPU#6: mkfs.ntfs/113998 [ 3959.023978] Modules linked in: dns_resolver tun brd overlay exfat btrfs blake2b libblake2b xor xor_neon raid6_pq loop sctp ip6_udp_tunnel udp_tunnel ext4 crc16 mbcache jbd2 rfkill sunrpc vfat fat sg fuse nfnetlink sr_mod virtio_gpu cdrom drm_client_lib virtio_dma_buf drm_shmem_helper drm_kms_helper ghash_ce drm sm4 backlight virtio_net net_failover virtio_scsi failover virtio_console virtio_blk virtio_mmio dm_mirror dm_region_hash dm_log dm_multipath dm_mod i2c_dev aes_neon_bs aes_ce_blk [last unloaded: hwpoison_inject] [ 3959.024170] CPU: 6 UID: 0 PID: 113998 Comm: mkfs.ntfs Kdump: loaded Tainted: G W 6.19.0-rc7+ #7 PREEMPT(voluntary) [ 3959.024182] Tainted: [W]=WARN [ 3959.024186] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [ 3959.024192] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3959.024199] pc : alloc_tag_add+0x128/0x178 [ 3959.024207] lr : alloc_tag_add+0x128/0x178 [ 3959.024214] sp : ffff80008b696d60 [ 3959.024219] x29: ffff80008b696d60 x28: 0000000000000000 x27: 0000000000000240 [ 3959.024232] x26: 0000000000000000 x25: 0000000000000240 x24: ffff800085d17860 [ 3959.024245] x23: 0000000000402800 x22: ffff0000c0012dc0 x21: 00000000000002d0 [ 3959.024257] x20: ffff0000e6ef3318 x19: ffff800085ae0410 x18: 0000000000000000 [ 3959.024269] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 3959.024281] x14: 0000000000000000 x13: 0000000000000001 x12: ffff600064101293 [ 3959.024292] x11: 1fffe00064101292 x10: ffff600064101292 x9 : dfff800000000000 [ 3959.024305] x8 : 00009fff9befed6e x7 : ffff000320809493 x6 : 0000000000000001 [ 3959.024316] x5 : ffff000320809490 x4 : ffff600064101293 x3 : ffff800080691838 [ 3959.024328] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000d5bcd640 [ 3959.024340] Call trace: [ 3959.024346] alloc_tag_add+0x128/0x178 (P) [ 3959.024355] __alloc_tagging_slab_alloc_hook+0x11c/0x1a8 [ 3959.024362] kmem_cache_alloc_lru_noprof+0x1b8/0x5e8 [ 3959.024369] xas_alloc+0x304/0x4f0 [ 3959.024381] xas_create+0x1e0/0x4a0 [ 3959.024388] xas_store+0x68/0xda8 [ 3959.024395] __filemap_add_folio+0x5b0/0xbd8 [ 3959.024409] filemap_add_folio+0x16c/0x7e0 [ 3959.024416] __filemap_get_folio_mpol+0x2dc/0x9e8 [ 3959.024424] iomap_get_folio+0xfc/0x180 [ 3959.024435] __iomap_get_folio+0x2f8/0x4b8 [ 3959.024441] iomap_write_begin+0x198/0xc18 [ 3959.024448] iomap_write_iter+0x2ec/0x8f8 [ 3959.024454] iomap_file_buffered_write+0x19c/0x290 [ 3959.024461] blkdev_write_iter+0x38c/0x978 [ 3959.024470] vfs_write+0x4d4/0x928 [ 3959.024482] ksys_write+0xfc/0x1f8 [ 3959.024489] __arm64_sys_write+0x74/0xb0 [ 3959.024496] invoke_syscall+0xd4/0x258 [ 3959.024507] el0_svc_common.constprop.0+0xb4/0x240 [ 3959.024514] do_el0_svc+0x48/0x68 [ 3959.024520] el0_svc+0x40/0xf8 [ 3959.024526] el0t_64_sync_handler+0xa0/0xe8 [ 3959.024533] el0t_64_sync+0x1ac/0x1b0 [ 3959.024540] ---[ end trace 0000000000000000 ]--- When __memcg_slab_post_alloc_hook() fails, there are two different free paths depending on whether size == 1 or size != 1. In the kmem_cache_free_bulk() path, we do call alloc_tagging_slab_free_hook(). However, in memcg_alloc_abort_single() we don't, the above warning will be triggered on the next allocation. Therefore, add alloc_tagging_slab_free_hook() to the memcg_alloc_abort_single() path.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23220
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths The problem occurs when a signed request fails smb2 signature verification check. In __process_request(), if check_sign_req() returns an error, set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called. set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain is lost. Consequently, is_chained_smb2_message() continues to point to the same request header instead of advancing. If the header's NextCommand field is non-zero, the function returns true, causing __handle_ksmbd_work() to repeatedly process the same failed request in an infinite loop. This results in the kernel log being flooded with "bad smb2 signature" messages and high CPU usage. This patch fixes the issue by changing the return value from SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that the processing loop terminates immediately rather than attempting to continue from an invalidated offset.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23221
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: fix use-after-free in driver_override_show() The driver_override_show() function reads the driver_override string without holding the device_lock. However, driver_override_store() uses driver_set_override(), which modifies and frees the string while holding the device_lock. This can result in a concurrent use-after-free if the string is freed by the store function while being read by the show function. Fix this by holding the device_lock around the read operation.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23222
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly The existing allocation of scatterlists in omap_crypto_copy_sg_lists() was allocating an array of scatterlist pointers, not scatterlist objects, resulting in a 4x too small allocation. Use sizeof(*new_sg) to get the correct object size.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23223
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfs: fix UAF in xchk_btree_check_block_owner We cannot dereference bs->cur when trying to determine if bs->cur aliases bs->sc->sa.{bno,rmap}_cur after the latter has been freed. Fix this by sampling before type before any freeing could happen. The correct temporal ordering was broken when we removed xfs_btnum_t.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23224
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: erofs: fix UAF issue for file-backed mounts w/ directio option [ 9.269940][ T3222] Call trace: [ 9.269948][ T3222] ext4_file_read_iter+0xac/0x108 [ 9.269979][ T3222] vfs_iocb_iter_read+0xac/0x198 [ 9.269993][ T3222] erofs_fileio_rq_submit+0x12c/0x180 [ 9.270008][ T3222] erofs_fileio_submit_bio+0x14/0x24 [ 9.270030][ T3222] z_erofs_runqueue+0x834/0x8ac [ 9.270054][ T3222] z_erofs_read_folio+0x120/0x220 [ 9.270083][ T3222] filemap_read_folio+0x60/0x120 [ 9.270102][ T3222] filemap_fault+0xcac/0x1060 [ 9.270119][ T3222] do_pte_missing+0x2d8/0x1554 [ 9.270131][ T3222] handle_mm_fault+0x5ec/0x70c [ 9.270142][ T3222] do_page_fault+0x178/0x88c [ 9.270167][ T3222] do_translation_fault+0x38/0x54 [ 9.270183][ T3222] do_mem_abort+0x54/0xac [ 9.270208][ T3222] el0_da+0x44/0x7c [ 9.270227][ T3222] el0t_64_sync_handler+0x5c/0xf4 [ 9.270253][ T3222] el0t_64_sync+0x1bc/0x1c0 EROFS may encounter above panic when enabling file-backed mount w/ directio mount option, the root cause is it may suffer UAF in below race condition: - z_erofs_read_folio wq s_dio_done_wq - z_erofs_runqueue - erofs_fileio_submit_bio - erofs_fileio_rq_submit - vfs_iocb_iter_read - ext4_file_read_iter - ext4_dio_read_iter - iomap_dio_rw : bio was submitted and return -EIOCBQUEUED - dio_aio_complete_work - dio_complete - dio->iocb->ki_complete (erofs_fileio_ki_complete()) - kfree(rq) : it frees iocb, iocb.ki_filp can be UAF in file_accessed(). - file_accessed : access NULL file point Introduce a reference count in struct erofs_fileio_rq, and initialize it as two, both erofs_fileio_ki_complete() and erofs_fileio_rq_submit() will decrease reference count, the last one decreasing the reference count to zero will free rq.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23226
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add chann_lock to protect ksmbd_chann_list xarray ksmbd_chann_list xarray lacks synchronization, allowing use-after-free in multi-channel sessions (between lookup_chann_list() and ksmbd_chann_del). Adds rw_semaphore chann_lock to struct ksmbd_session and protects all xa_load/xa_store/xa_erase accesses.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23227
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free Exynos Virtual Display driver performs memory alloc/free operations without lock protection, which easily causes concurrency problem. For example, use-after-free can occur in race scenario like this: ``` CPU0 CPU1 CPU2 ---- ---- ---- vidi_connection_ioctl() if (vidi->connection) // true drm_edid = drm_edid_alloc(); // alloc drm_edid ... ctx->raw_edid = drm_edid; ... drm_mode_getconnector() drm_helper_probe_single_connector_modes() vidi_get_modes() if (ctx->raw_edid) // true drm_edid_dup(ctx->raw_edid); if (!drm_edid) // false ... vidi_connection_ioctl() if (vidi->connection) // false drm_edid_free(ctx->raw_edid); // free drm_edid ... drm_edid_alloc(drm_edid->edid) kmemdup(edid); // UAF!! ... ``` To prevent these vulns, at least in vidi_context, member variables related to memory alloc/free should be protected with ctx->lock.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23228
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection() On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is freed via free_transport(), which does not decrement active_num_conn, leaking this counter. Replace free_transport() with ksmbd_tcp_disconnect().

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23229
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - Add spinlock protection with virtqueue notification When VM boots with one virtio-crypto PCI device and builtin backend, run openssl benchmark command with multiple processes, such as openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32 openssl processes will hangup and there is error reported like this: virtio_crypto virtio0: dataq.0:id 3 is not a head! It seems that the data virtqueue need protection when it is handled for virtio done notification. If the spinlock protection is added in virtcrypto_done_task(), openssl benchmark with multiple processes works well.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23230
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: client: split cached_fid bitfields to avoid shared-byte RMW races is_open, has_lease and on_list are stored in the same bitfield byte in struct cached_fid but are updated in different code paths that may run concurrently. Bitfield assignments generate byte read–modify–write operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can restore stale values of the others. A possible interleaving is: CPU1: load old byte (has_lease=1, on_list=1) CPU2: clear both flags (store 0) CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits To avoid this class of races, convert these flags to separate bool fields.

Published: 2026-02-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23231
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nf_tables_addchain() nf_tables_addchain() publishes the chain to table->chains via list_add_tail_rcu() (in nft_chain_add()) before registering hooks. If nf_tables_register_hook() then fails, the error path calls nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy() with no RCU grace period in between. This creates two use-after-free conditions: 1) Control-plane: nf_tables_dump_chains() traverses table->chains under rcu_read_lock(). A concurrent dump can still be walking the chain when the error path frees it. 2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly installs the IPv4 hook before IPv6 registration fails. Packets entering nft_do_chain() via the transient IPv4 hook can still be dereferencing chain->blob_gen_X when the error path frees the chain. Add synchronize_rcu() between nft_chain_del() and the chain destroy so that all RCU readers -- both dump threads and in-flight packet evaluation -- have finished before the chain is freed.

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23233
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F2FS-formatted userdata partition 2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng 3 Run swap stress test: (Android devices) adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60 --swap 0" Log: 1 Ftrace shows in kernel 6.6, only first extent is mapped during second f2fs_map_blocks call in check_swap_activate(): stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start blkaddr=0x43143, len=0x1 (Only 4KB mapped, not the full swapfile) 2 in kernel 6.1, both extents are correctly mapped: stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start blkaddr=0x13cd4, len=0x1 stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start blkaddr=0x60c84b, len=0xff The problematic code is in check_swap_activate(): if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec || nr_pblocks % blks_per_sec || !f2fs_valid_pinned_area(sbi, pblock)) { bool last_extent = false; not_aligned++; nr_pblocks = roundup(nr_pblocks, blks_per_sec); if (cur_lblock + nr_pblocks > sis->max) nr_pblocks -= blks_per_sec; /* this extent is last one */ if (!nr_pblocks) { nr_pblocks = last_lblock - cur_lblock; last_extent = true; } ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks); if (ret) { if (ret == -ENOENT) ret = -EINVAL; goto out; } if (!last_extent) goto retry; } When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec) exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The code then incorrectly assumes this is the last extent, sets nr_pblocks = last_lblock - cur_lblock (entire swapfile), and performs migration. After migration, it doesn't retry mapping, so subsequent extents are never processed. " In order to fix this issue, we need to lookup block mapping info after we migrate all blocks in the tail of swapfile.

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23234
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23235
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix out-of-bounds access in sysfs attribute read/write Some f2fs sysfs attributes suffer from out-of-bounds memory access and incorrect handling of integer values whose size is not 4 bytes. For example: vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out vm:~# cat /sys/fs/f2fs/vde/carve_out 65537 vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold 1 carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit integer. However, the sysfs interface allows setting it to a value larger than 255, resulting in an out-of-range update. atgc_age_threshold maps to {struct atgc_management}->age_threshold, which is a 64-bit integer, but its sysfs interface cannot correctly set values larger than UINT_MAX. The root causes are: 1. __sbi_store() treats all default values as unsigned int, which prevents updating integers larger than 4 bytes and causes out-of-bounds writes for integers smaller than 4 bytes. 2. f2fs_sbi_show() also assumes all default values are unsigned int, leading to out-of-bounds reads and incorrect access to integers larger than 4 bytes. This patch introduces {struct f2fs_attr}->size to record the actual size of the integer associated with each sysfs attribute. With this information, sysfs read and write operations can correctly access and update values according to their real data size, avoiding memory corruption and truncation.

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23236
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: smscufx: properly copy ioctl memory to kernelspace The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel.

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23237
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86: classmate-laptop: Add missing NULL pointer checks In a few places in the Classmate laptop driver, code using the accel object may run before that object's address is stored in the driver data of the input device using it. For example, cmpc_accel_sensitivity_store_v4() is the "show" method of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(), before calling dev_set_drvdata() for inputdev->dev. If the sysfs attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev) call in in cmpc_accel_sensitivity_store_v4() returns NULL which leads to a NULL pointer dereference going forward. Moreover, sysfs attributes using the input device are added before initializing that device by cmpc_add_acpi_notify_device() and if one of them is accessed before running that function, a NULL pointer dereference will occur. For example, cmpc_accel_sensitivity_attr_v4 is added before calling cmpc_add_acpi_notify_device() and if it is read prematurely, the dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4() returns NULL which leads to a NULL pointer dereference going forward. Fix this by adding NULL pointer checks in all of the relevant places.

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23238
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0.

Published: 2026-03-04Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23239
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: espintcp: Fix race condition in espintcp_close() This issue was discovered during a code audit. After cancel_work_sync() is called from espintcp_close(), espintcp_tx_work() can still be scheduled from paths such as the Delayed ACK handler or ksoftirqd. As a result, the espintcp_tx_work() worker may dereference a freed espintcp ctx or sk. The following is a simple race scenario: cpu0 cpu1 espintcp_close() cancel_work_sync(&ctx->work); espintcp_write_space() schedule_work(&ctx->work); To prevent this race condition, cancel_work_sync() is replaced with disable_work_sync().

Published: 2026-03-10Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23240
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: tls: Fix race condition in tls_sw_cancel_work_tx() This issue was discovered during a code audit. After cancel_delayed_work_sync() is called from tls_sk_proto_close(), tx_work_handler() can still be scheduled from paths such as the Delayed ACK handler or ksoftirqd. As a result, the tx_work_handler() worker may dereference a freed TLS object. The following is a simple race scenario: cpu0 cpu1 tls_sk_proto_close() tls_sw_cancel_work_tx() tls_write_space() tls_sw_write_space() if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask)) set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask); cancel_delayed_work_sync(&ctx->tx_work.work); schedule_delayed_work(&tx_ctx->tx_work.work, 0); To prevent this race condition, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync().

Published: 2026-03-10Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23241
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: audit: add missing syscalls to read class The "at" variant of getxattr() and listxattr() are missing from the audit read class. Calling getxattrat() or listxattrat() on a file to read its extended attributes will bypass audit rules such as: -w /tmp/test -p rwa -k test_rwa The current patch adds missing syscalls to the audit read class.

Published: 2026-03-17Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23242
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix potential NULL pointer dereference in header processing If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(), qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data() dereferences qp->rx_fpdu->more_ddp_segs without checking, which may lead to a NULL pointer deref. Only check more_ddp_segs when rx_fpdu is present. KASAN splat: [ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] [ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23243
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23244
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: nvme: fix memory allocation in nvme_pr_read_keys() nvme_pr_read_keys() takes num_keys from userspace and uses it to calculate the allocation size for rse via struct_size(). The upper limit is PR_KEYS_MAX (64K). A malicious or buggy userspace can pass a large num_keys value that results in a 4MB allocation attempt at most, causing a warning in the page allocator when the order exceeds MAX_PAGE_ORDER. To fix this, use kvzalloc() instead of kzalloc(). This bug has the same reasoning and fix with the patch below: https://lore.kernel.org/linux-block/20251212013510.3576091-1-kartikey406@gmail.com/ Warning log: WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272 Modules linked in: CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216 Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0d RSP: 0018:ffffc90000fcf450 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0 RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0 RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001 R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000 R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620 FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0 Call Trace: alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486 alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557 ___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598 __kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629 __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245 blkdev_pr_read_keys block/ioctl.c:456 [inline] blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730 blkdev_ioctl+0x299/0x700 block/ioctl.c:786 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583 x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb893d3108d Code: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108d RDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23245
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gate: snapshot parameters with RCU on replace The gate action can be replaced while the hrtimer callback or dump path is walking the schedule list. Convert the parameters to an RCU-protected snapshot and swap updates under tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits the entry list, preserve the existing schedule so the effective state is unchanged.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23246
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration link_id is taken from the ML Reconfiguration element (control & 0x000f), so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS (15) elements, so index 15 is out-of-bounds. Skip subelements with link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds write.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23247
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tcp: secure_seq: add back ports to TS offset This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets") tcp_tw_recycle went away in 2017. Zhouyan Deng reported off-path TCP source port leakage via SYN cookie side-channel that can be fixed in multiple ways. One of them is to bring back TCP ports in TS offset randomization. As a bonus, we perform a single siphash() computation to provide both an ISN and a TS offset.

Published: 2026-03-18Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23248
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix refcount bug and potential UAF in perf_mmap Syzkaller reported a refcount_t: addition on 0; use-after-free warning in perf_mmap. The issue is caused by a race condition between a failing mmap() setup and a concurrent mmap() on a dependent event (e.g., using output redirection). In perf_mmap(), the ring_buffer (rb) is allocated and assigned to event->rb with the mmap_mutex held. The mutex is then released to perform map_range(). If map_range() fails, perf_mmap_close() is called to clean up. However, since the mutex was dropped, another thread attaching to this event (via inherited events or output redirection) can acquire the mutex, observe the valid event->rb pointer, and attempt to increment its reference count. If the cleanup path has already dropped the reference count to zero, this results in a use-after-free or refcount saturation warning. Fix this by extending the scope of mmap_mutex to cover the map_range() call. This ensures that the ring buffer initialization and mapping (or cleanup on failure) happens atomically effectively, preventing other threads from accessing a half-initialized or dying ring buffer.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23249
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfs: check for deleted cursors when revalidating two btrees The free space and inode btree repair functions will rebuild both btrees at the same time, after which it needs to evaluate both btrees to confirm that the corruptions are gone. However, Jiaming Zhang ran syzbot and produced a crash in the second xchk_allocbt call. His root-cause analysis is as follows (with minor corrections): In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first for BNOBT, second for CNTBT). The cause of this issue is that the first call nullified the cursor required by the second call. Let's first enter xrep_revalidate_allocbt() via following call chain: xfs_file_ioctl() -> xfs_ioc_scrubv_metadata() -> xfs_scrub_metadata() -> `sc->ops->repair_eval(sc)` -> xrep_revalidate_allocbt() xchk_allocbt() is called twice in this function. In the first call: /* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */ xchk_allocbt() -> xchk_btree() -> `bs->scrub_rec(bs, recp)` -> xchk_allocbt_rec() -> xchk_allocbt_xref() -> xchk_allocbt_xref_other() since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur. Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call chain: xfs_alloc_get_rec() -> xfs_btree_get_rec() -> xfs_btree_check_block() -> (XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter is true, return -EFSCORRUPTED. This should be caused by ioctl$XFS_IOC_ERROR_INJECTION I guess. Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this function, *curpp (points to sc->sa.cnt_cur) is nullified. Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been nullified, it then triggered null-ptr-deref via xchk_allocbt() (second call) -> xchk_btree(). So. The bnobt revalidation failed on a cross-reference attempt, so we deleted the cntbt cursor, and then crashed when we tried to revalidate the cntbt. Therefore, check for a null cntbt cursor before that revalidation, and mark the repair incomplete. Also we can ignore the second tree entirely if the first tree was rebuilt but is already corrupt. Apply the same fix to xrep_revalidate_iallocbt because it has the same problem.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23250
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfs: check return value of xchk_scrub_create_subord Fix this function to return NULL instead of a mangled ENOMEM, then fix the callers to actually check for a null pointer and return ENOMEM. Most of the corrections here are for code merged between 6.2 and 6.10.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23251
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfs: only call xf{array,blob}_destroy if we have a valid pointer Only call the xfarray and xfblob destructor if we have a valid pointer, and be sure to null out that pointer afterwards. Note that this patch fixes a large number of commits, most of which were merged between 6.9 and 6.10.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23252
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfs: get rid of the xchk_xfile_*_descr calls The xchk_xfile_*_descr macros call kasprintf, which can fail to allocate memory if the formatted string is larger than 16 bytes (or whatever the nofail guarantees are nowadays). Some of them could easily exceed that, and Jiaming Zhang found a few places where that can happen with syzbot. The descriptions are debugging aids and aren't required to be unique, so let's just pass in static strings and eliminate this path to failure. Note this patch touches a number of commits, most of which were merged between 6.6 and 6.14.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23253
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: fix wrong reinitialization of ringbuffer on reopen dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23254
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: gro: fix outer network offset The udp GRO complete stage assumes that all the packets inserted the RX have the `encapsulation` flag zeroed. Such assumption is not true, as a few H/W NICs can set such flag when H/W offloading the checksum for an UDP encapsulated traffic, the tun driver can inject GSO packets with UDP encapsulation and the problematic layout can also be created via a veth based setup. Due to the above, in the problematic scenarios, udp4_gro_complete() uses the wrong network offset (inner instead of outer) to compute the outer UDP header pseudo checksum, leading to csum validation errors later on in packet processing. Address the issue always clearing the encapsulation flag at GRO completion time. Such flag will be set again as needed for encapsulated packets by udp_gro_complete().

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23255
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: add proper RCU protection to /proc/net/ptype Yin Fengwei reported an RCU stall in ptype_seq_show() and provided a patch. Real issue is that ptype_seq_next() and ptype_seq_show() violate RCU rules. ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev to get device name without any barrier. At the same time, concurrent writers can remove a packet_type structure (which is correctly freed after an RCU grace period) and clear pt->dev without an RCU grace period. Define ptype_iter_state to carry a dev pointer along seq_net_private: struct ptype_iter_state { struct seq_net_private p; struct net_device *dev; // added in this patch }; We need to record the device pointer in ptype_get_idx() and ptype_seq_next() so that ptype_seq_show() is safe against concurrent pt->dev changes. We also need to add full RCU protection in ptype_seq_next(). (Missing READ_ONCE() when reading list.next values) Many thanks to Dong Chenchen for providing a repro.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23256
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Fix off-by-one error in VF setup_nic_devices() cleanup In setup_nic_devices(), the initialization loop jumps to the label setup_nic_dev_free on failure. The current cleanup loop while(i--) skip the failing index i, causing a memory leak. Fix this by changing the loop to iterate from the current index i down to 0. Compile tested only. Issue found using code review.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23257
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanup In setup_nic_devices(), the initialization loop jumps to the label setup_nic_dev_free on failure. The current cleanup loop while(i--) skip the failing index i, causing a memory leak. Fix this by changing the loop to iterate from the current index i down to 0. Also, decrement i in the devlink_alloc failure path to point to the last successfully allocated index. Compile tested only. Issue found using code review.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23258
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Initialize netdev pointer before queue setup In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq(). However, the pointer to this structure is stored in oct->props[i].netdev only after the calls to netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues(). If either of these functions fails, setup_nic_devices() returns an error without freeing the allocated netdev. Since oct->props[i].netdev is still NULL at this point, the cleanup function liquidio_destroy_nic_device() will fail to find and free the netdev, resulting in a memory leak. Fix this by initializing oct->props[i].netdev before calling the queue setup functions. This ensures that the netdev is properly accessible for cleanup in case of errors. Compile tested only. Issue found using a prototype static analysis tool and code review.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23259
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: free potentially allocated iovec on cache put failure If a read/write request goes through io_req_rw_cleanup() and has an allocated iovec attached and fails to put to the rw_cache, then it may end up with an unaccounted iovec pointer. Have io_rw_recycle() return whether it recycled the request or not, and use that to gauge whether to free a potential iovec or not.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23260
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: regmap: maple: free entry on mas_store_gfp() failure regcache_maple_write() allocates a new block ('entry') to merge adjacent ranges and then stores it with mas_store_gfp(). When mas_store_gfp() fails, the new 'entry' remains allocated and is never freed, leaking memory. Free 'entry' on the failure path; on success continue freeing the replaced neighbor blocks ('lower', 'upper').

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23261
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: release admin tagset if init fails nvme_fabrics creates an NVMe/FC controller in following path: nvmf_dev_write() -> nvmf_create_ctrl() -> nvme_fc_create_ctrl() -> nvme_fc_init_ctrl() nvme_fc_init_ctrl() allocates the admin blk-mq resources right after nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing the controller state, scheduling connect work, etc.), we jump to the fail_ctrl path, which tears down the controller references but never frees the admin queue/tag set. The leaked blk-mq allocations match the kmemleak report seen during blktests nvme/fc. Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call nvme_remove_admin_tag_set() when it is set so that all admin queue allocations are reclaimed whenever controller setup aborts.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23262
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: gve: Fix stats report corruption on queue count change The driver and the NIC share a region in memory for stats reporting. The NIC calculates its offset into this region based on the total size of the stats region and the size of the NIC's stats. When the number of queues is changed, the driver's stats region is resized. If the queue count is increased, the NIC can write past the end of the allocated stats region, causing memory corruption. If the queue count is decreased, there is a gap between the driver and NIC stats, leading to incorrect stats reporting. This change fixes the issue by allocating stats region with maximum size, and the offset calculation for NIC stats is changed to match with the calculation of the NIC.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23263
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix page array leak d9f595b9a65e ("io_uring/zcrx: fix leaking pages on sg init fail") fixed a page leakage but didn't free the page array, release it as well.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23264
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem" This reverts commit 7294863a6f01248d72b61d38478978d638641bee. This commit was erroneously applied again after commit 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device") removed it, leading to very hard to debug crashes, when used with a system with two AMD GPUs of which only one supports ASPM. (cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080)

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23265
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on node footer in {read,write}_end_io -----------[ cut here ]------------ kernel BUG at fs/f2fs/data.c:358! Call Trace: blk_update_request+0x5eb/0xe70 block/blk-mq.c:987 blk_mq_end_request+0x3e/0x70 block/blk-mq.c:1149 blk_complete_reqs block/blk-mq.c:1224 [inline] blk_done_softirq+0x107/0x160 block/blk-mq.c:1229 handle_softirqs+0x283/0x870 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] invoke_softirq kernel/softirq.c:453 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1050 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1050 In f2fs_write_end_io(), it detects there is inconsistency in between node page index (nid) and footer.nid of node page. If footer of node page is corrupted in fuzzed image, then we load corrupted node page w/ async method, e.g. f2fs_ra_node_pages() or f2fs_ra_node_page(), in where we won't do sanity check on node footer, once node page becomes dirty, we will encounter this bug after node page writeback.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23266
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: rivafb: fix divide error in nv3_arb() A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23267
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes During SPO tests, when mounting F2FS, an -EINVAL error was returned from f2fs_recover_inode_page. The issue occurred under the following scenario Thread A Thread B f2fs_ioc_commit_atomic_write - f2fs_do_sync_file // atomic = true - f2fs_fsync_node_pages : last_folio = inode folio : schedule before folio_lock(last_folio) f2fs_write_checkpoint - block_operations// writeback last_folio - schedule before f2fs_flush_nat_entries : set_fsync_mark(last_folio, 1) : set_dentry_mark(last_folio, 1) : folio_mark_dirty(last_folio) - __write_node_folio(last_folio) : f2fs_down_read(&sbi->node_write)//block - f2fs_flush_nat_entries : {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED) - unblock_operations : f2fs_up_write(&sbi->node_write) f2fs_write_checkpoint//return : f2fs_do_write_node_page() f2fs_ioc_commit_atomic_write//return SPO Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has already been written once. However, the {struct nat_entry}->flag did not have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and write last_folio again after Thread B finishes f2fs_write_checkpoint. After SPO and reboot, it was detected that {struct node_info}->blk_addr was not NULL_ADDR because Thread B successfully write the checkpoint. This issue only occurs in atomic write scenarios. For regular file fsync operations, the folio must be dirty. If block_operations->f2fs_sync_node_pages successfully submit the folio write, this path will not be executed. Otherwise, the f2fs_write_checkpoint will need to wait for the folio write submission to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the situation where f2fs_need_dentry_mark checks that the {struct nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has already been submitted, will not occur. Therefore, for atomic file fsync, sbi->node_write should be acquired through __write_node_folio to ensure that the IS_CHECKPOINTED flag correctly indicates that the checkpoint write has been completed.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23268
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unprivileged local user can do privileged policy management An unprivileged local user can load, replace, and remove profiles by opening the apparmorfs interfaces, via a confused deputy attack, by passing the opened fd to a privileged process, and getting the privileged process to write to the interface. This does require a privileged target that can be manipulated to do the write for the unprivileged process, but once such access is achieved full policy management is possible and all the possible implications that implies: removing confinement, DoS of system or target applications by denying all execution, by-passing the unprivileged user namespace restriction, to exploiting kernel bugs for a local privilege escalation. The policy management interface can not have its permissions simply changed from 0666 to 0600 because non-root processes need to be able to load policy to different policy namespaces. Instead ensure the task writing the interface has privileges that are a subset of the task that opened the interface. This is already done via policy for confined processes, but unconfined can delegate access to the opened fd, by-passing the usual policy check.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23269
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: apparmor: validate DFA start states are in bounds in unpack_pdb Start states are read from untrusted data and used as indexes into the DFA state tables. The aa_dfa_next() function call in unpack_pdb() will access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds the number of states in the DFA, this results in an out-of-bound read. ================================================================== BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360 Read of size 4 at addr ffff88811956fb90 by task su/1097 ... Reject policies with out-of-bounds start states during unpacking to prevent the issue.

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23270
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/

Published: 2026-03-18Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23271
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: perf: Fix __perf_event_overflow() vs perf_remove_from_context() race Make sure that __perf_event_overflow() runs with IRQs disabled for all possible callchains. Specifically the software events can end up running it with only preemption disabled. This opens up a race vs perf_event_exit_event() and friends that will go and free various things the overflow path expects to be present, like the BPF program.

Published: 2026-03-20Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23272
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally bump set->nelems before insertion In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches.

Published: 2026-03-20Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23274
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type.

Published: 2026-03-20Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23275
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper.

Published: 2026-03-20Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23276
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: add xmit recursion limit to tunnel xmit functions Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own recursion limit. When a bond device in broadcast mode has GRE tap interfaces as slaves, and those GRE tunnels route back through the bond, multicast/broadcast traffic triggers infinite recursion between bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing kernel stack overflow. The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not sufficient because tunnel recursion involves route lookups and full IP output, consuming much more stack per level. Use a lower limit of 4 (IP_TUNNEL_RECURSION_LIMIT) to prevent overflow. Add recursion detection using dev_xmit_recursion helpers directly in iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.). Move dev_xmit_recursion helpers from net/core/dev.h to public header include/linux/netdevice.h so they can be used by tunnel code. BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160 Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11 Workqueue: mld mld_ifc_work Call Trace: __build_flow_key.constprop.0 (net/ipv4/route.c:515) ip_rt_update_pmtu (net/ipv4/route.c:1073) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) mld_sendpack mld_ifc_work process_one_work worker_thread

Published: 2026-03-20Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23277
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit through slave devices, but does not update skb->dev to the slave device beforehand. When a gretap tunnel is a TEQL slave, the transmit path reaches iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0 master) and later calls iptunnel_xmit_stats(dev, pkt_len). This function does: get_cpu_ptr(dev->tstats) Since teql_master_setup() does not set dev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes NULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206) Fix this by setting skb->dev = slave before calling netdev_start_xmit(), so that tunnel xmit functions see the correct slave device with properly allocated tstats.

Published: 2026-03-20Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23278
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always walk all pending catchall elements During transaction processing we might have more than one catchall element: 1 live catchall element and 1 pending element that is coming as part of the new batch. If the map holding the catchall elements is also going away, its required to toggle all catchall elements and not just the first viable candidate. Otherwise, we get: WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404 RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables] [..] __nft_set_elem_destroy+0x106/0x380 [nf_tables] nf_tables_abort_release+0x348/0x8d0 [nf_tables] nf_tables_abort+0xcf2/0x3ac0 [nf_tables] nfnetlink_rcv_batch+0x9c9/0x20e0 [..]

Published: 2026-03-20Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23279
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame() In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced at lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); The mesh_matches_local() check above only validates the Mesh ID, Mesh Configuration, and Supported Rates IEs. It does not verify the presence of the Mesh Channel Switch Parameters IE (element ID 118). When a received CSA action frame omits that IE, ieee802_11_parse_elems() leaves elems->mesh_chansw_params_ie as NULL, and the unconditional dereference causes a kernel NULL pointer dereference. A remote mesh peer with an established peer link (PLINK_ESTAB) can trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame that includes a matching Mesh ID and Mesh Configuration IE but omits the Mesh Channel Switch Parameters IE. No authentication beyond the default open mesh peering is required. Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000 Fix by adding a NULL check for mesh_chansw_params_ie after mesh_matches_local() returns, consistent with how other optional IEs are guarded throughout the mesh code. The bug has been present since v3.13 (released 2014-01-19).

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23280
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent ubuf size overflow The ubuf size calculation may overflow, resulting in an undersized allocation and possible memory corruption. Use check_add_overflow() helpers to validate the size calculation before allocation.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23281
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix use-after-free in lbs_free_adapter() The lbs_free_adapter() function uses timer_delete() (non-synchronous) for both command_timer and tx_lockup_timer before the structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If a timer callback is executing when lbs_free_adapter() is called, the callback will access freed memory since lbs_cfg_free() frees the containing structure immediately after lbs_free_adapter() returns. Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler) access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields, which would all be use-after-free violations. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. This bug was introduced in commit 8f641d93c38a ("libertas: detect TX lockups and reset hardware") where del_timer() was used instead of del_timer_sync() in the cleanup path. The command_timer has had the same issue since the driver was first written.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23282
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix oops due to uninitialised var in smb2_unlink() If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the iovs set @rqst will be left uninitialised, hence calling SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will oops. Fix this by initialising @close_iov and @open_iov before setting them in @rqst.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23284
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup() Reset eBPF program pointer to old_prog and do not decrease its ref-count if mtk_open routine in mtk_xdp_setup() fails.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23285
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drbd: fix null-pointer dereference on local read error In drbd_request_endio(), READ_COMPLETED_WITH_ERROR is passed to __req_mod() with a NULL peer_device: __req_mod(req, what, NULL, &m); The READ_COMPLETED_WITH_ERROR handler then unconditionally passes this NULL peer_device to drbd_set_out_of_sync(), which dereferences it, causing a null-pointer dereference. Fix this by obtaining the peer_device via first_peer_device(device), matching how drbd_req_destroy() handles the same situation.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23286
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix null-ptr-deref in lec_arp_clear_vccs syzkaller reported a null-ptr-deref in lec_arp_clear_vccs(). This issue can be easily reproduced using the syzkaller reproducer. In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc). When the underlying VCC is closed, lec_vcc_close() iterates over all ARP entries and calls lec_arp_clear_vccs() for each matched entry. For example, when lec_vcc_close() iterates through the hlists in priv->lec_arp_empty_ones or other ARP tables: 1. In the first iteration, for the first matched ARP entry sharing the VCC, lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back) and sets vcc->user_back to NULL. 2. In the second iteration, for the next matched ARP entry sharing the same VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash. Fix this by adding a null check for vpriv before dereferencing it. If vpriv is already NULL, it means the VCC has been cleared by a previous call, so we can safely skip the cleanup and just clear the entry's vcc/recv_vcc pointers. The entire cleanup block (including vcc_release_async()) is placed inside the vpriv guard because a NULL vpriv indicates the VCC has already been fully released by a prior iteration — repeating the teardown would redundantly set flags and trigger callbacks on an already-closing socket. The Fixes tag points to the initial commit because the entry->vcc path has been vulnerable since the original code. The entry->recv_vcc path was later added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back") with the same pattern, and both paths are fixed here.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23287
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23289
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq() Fix a user triggerable leak on the system call failure path.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23290
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: validate USB endpoints The pegasus driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23291
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: properly drop the usb interface reference on disconnect When the device is disconnected from the driver, there is a "dangling" reference count on the usb interface that was grabbed in the probe callback. Fix this up by properly dropping the reference after we are done with it.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23292
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix recursive locking in __configfs_open_file() In flush_write_buffer, &p->frag_sem is acquired and then the loaded store function is called, which, here, is target_core_item_dbroot_store(). This function called filp_open(), following which these functions were called (in reverse order), according to the call trace: down_read __configfs_open_file do_dentry_open vfs_open do_open path_openat do_filp_open file_open_name filp_open target_core_item_dbroot_store flush_write_buffer configfs_write_iter target_core_item_dbroot_store() tries to validate the new file path by trying to open the file path provided to it; however, in this case, the bug report shows: db_root: not a directory: /sys/kernel/config/target/dbroot indicating that the same configfs file was tried to be opened, on which it is currently working on. Thus, it is trying to acquire frag_sem semaphore of the same file of which it already holds the semaphore obtained in flush_write_buffer(), leading to acquiring the semaphore in a nested manner and a possibility of recursive locking. Fix this by modifying target_core_item_dbroot_store() to use kern_path() instead of filp_open() to avoid opening the file using filesystem-specific function __configfs_open_file(), and further modifying it to make this fix compatible.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23293
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If an IPv6 packet is injected into the interface, route_shortcircuit() is called and a NULL pointer dereference happens on neigh_lookup(). BUG: kernel NULL pointer dereference, address: 0000000000000380 Oops: Oops: 0000 [#1] SMP NOPTI [...] RIP: 0010:neigh_lookup+0x20/0x270 [...] Call Trace: vxlan_xmit+0x638/0x1ef0 [vxlan] dev_hard_start_xmit+0x9e/0x2e0 __dev_queue_xmit+0xbee/0x14e0 packet_sendmsg+0x116f/0x1930 __sys_sendto+0x1f5/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x12f/0x1590 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by adding an early check on route_shortcircuit() when protocol is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because VXLAN can be built-in even when IPv6 is built as a module.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23294
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix race in devmap on PREEMPT_RT On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be accessed concurrently by multiple preemptible tasks on the same CPU. The original code assumes bq_enqueue() and __dev_flush() run atomically with respect to each other on the same CPU, relying on local_bh_disable() to prevent preemption. However, on PREEMPT_RT, local_bh_disable() only calls migrate_disable() (when PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable preemption, which allows CFS scheduling to preempt a task during bq_xmit_all(), enabling another task on the same CPU to enter bq_enqueue() and operate on the same per-CPU bq concurrently. This leads to several races: 1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames. If preempted after the snapshot, a second task can call bq_enqueue() -> bq_xmit_all() on the same bq, transmitting (and freeing) the same frames. When the first task resumes, it operates on stale pointers in bq->q[], causing use-after-free. 2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying bq->count and bq->q[] while bq_xmit_all() is reading them. 3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and bq->xdp_prog after bq_xmit_all(). If preempted between bq_xmit_all() return and bq->dev_rx = NULL, a preempting bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to the flush_list, and enqueues a frame. When __dev_flush() resumes, it clears dev_rx and removes bq from the flush_list, orphaning the newly enqueued frame. 4. __list_del_clearprev() on flush_node: similar to the cpumap race, both tasks can call __list_del_clearprev() on the same flush_node, the second dereferences the prev pointer already set to NULL. The race between task A (__dev_flush -> bq_xmit_all) and task B (bq_enqueue -> bq_xmit_all) on the same CPU: Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect) ---------------------- -------------------------------- __dev_flush(flush_list) bq_xmit_all(bq) cnt = bq->count /* e.g. 16 */ /* start iterating bq->q[] */ <-- CFS preempts Task A --> bq_enqueue(dev, xdpf) bq->count == DEV_MAP_BULK_SIZE bq_xmit_all(bq, 0) cnt = bq->count /* same 16! */ ndo_xdp_xmit(bq->q[]) /* frames freed by driver */ bq->count = 0 <-- Task A resumes --> ndo_xdp_xmit(bq->q[]) /* use-after-free: frames already freed! */ Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring it in bq_enqueue() and __dev_flush(). These paths already run under local_bh_disable(), so use local_lock_nested_bh() which on non-RT is a pure annotation with no overhead, and on PREEMPT_RT provides a per-CPU sleeping lock that serializes access to the bq.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23296
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix refcount leak for tagset_refcnt This leak will cause a hang when tearing down the SCSI host. For example, iscsid hangs with the following call trace: [130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid" #0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4 #1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f #2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0 #3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f #4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b #5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp] #6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi] #7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi] #8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6 #9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23297
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit(). syzbot reported memory leak of struct cred. [0] nfsd_nl_threads_set_doit() passes get_current_cred() to nfsd_svc(), but put_cred() is not called after that. The cred is finally passed down to _svc_xprt_create(), which calls get_cred() with the cred for struct svc_xprt. The ownership of the refcount by get_current_cred() is not transferred to anywhere and is just leaked. nfsd_svc() is also called from write_threads(), but it does not bump file->f_cred there. nfsd_nl_threads_set_doit() is called from sendmsg() and current->cred does not go away. Let's use current_cred() in nfsd_nl_threads_set_doit(). [0]: BUG: memory leak unreferenced object 0xffff888108b89480 (size 184): comm "syz-executor", pid 5994, jiffies 4294943386 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 369454a7): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x412/0x580 mm/slub.c:5270 prepare_creds+0x22/0x600 kernel/cred.c:185 copy_creds+0x44/0x290 kernel/cred.c:286 copy_process+0x7a7/0x2870 kernel/fork.c:2086 kernel_clone+0xac/0x6e0 kernel/fork.c:2651 __do_sys_clone+0x7f/0xb0 kernel/fork.c:2792 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23298
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: ucan: Fix infinite loop from zero-length messages If a broken ucan device gets a message with the message length field set to 0, then the driver will loop for forever in ucan_read_bulk_callback(), hanging the system. If the length is 0, just skip the message and go on to the next one. This has been fixed in the kvaser_usb driver in the past in commit 0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in command parsers"), so there must be some broken devices out there like this somewhere.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23299
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: purge error queues in socket destructors When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued into sk_error_queue and will stay there until consumed. If userspace never gets to read the timestamps, or if the controller is removed unexpectedly, these SKBs will leak. Fix by adding skb_queue_purge() calls for sk_error_queue in affected bluetooth destructors. RFCOMM does not currently use sk_error_queue.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23300
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23302
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: net: annotate data-races around sk->sk_{data_ready,write_space} skmsg (and probably other layers) are changing these pointers while other cpus might read them concurrently. Add corresponding READ_ONCE()/WRITE_ONCE() annotations for UDP, TCP and AF_UNIX.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23303
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23304
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu() l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23305
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix unwinding in error path in rocket_probe When rocket_core_init() fails (as could be the case with EPROBE_DEFER), we need to properly unwind by decrementing the counter we just incremented and if this is the first core we failed to probe, remove the rocket DRM device with rocket_device_fini() as well. This matches the logic in rocket_remove(). Failing to properly unwind results in out-of-bounds accesses.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23306
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free in pm8001_queue_command() Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors pm8001_queue_command(), however it introduces a potential cause of a double free scenario when it changes the function to return -ENODEV in case of phy down/device gone state. In this path, pm8001_queue_command() updates task status and calls task_done to indicate to upper layer that the task has been handled. However, this also frees the underlying SAS task. A -ENODEV is then returned to the caller. When libsas sas_ata_qc_issue() receives this error value, it assumes the task wasn't handled/queued by LLDD and proceeds to clean up and free the task again, resulting in a double free. Since pm8001_queue_command() handles the SAS task in this case, it should return 0 to the caller indicating that the task has been handled.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23307
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message When looking at the data in a USB urb, the actual_length is the size of the buffer passed to the driver, not the transfer_buffer_length which is set by the driver as the max size of the buffer. When parsing the messages in ems_usb_read_bulk_callback() properly check the size both at the beginning of parsing the message to make sure it is big enough for the expected structure, and at the end of the message to make sure we don't overflow past the end of the buffer for the next message.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23308
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pinctrl: equilibrium: fix warning trace on load The callback functions 'eqbr_irq_mask()' and 'eqbr_irq_ack()' are also called in the callback function 'eqbr_irq_mask_ack()'. This is done to avoid source code duplication. The problem, is that in the function 'eqbr_irq_mask()' also calles the gpiolib function 'gpiochip_disable_irq()' This generates the following warning trace in the log for every gpio on load. [ 6.088111] ------------[ cut here ]------------ [ 6.092440] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3810 gpiochip_disable_irq+0x39/0x50 [ 6.097847] Modules linked in: [ 6.097847] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.59+ #0 [ 6.097847] Tainted: [W]=WARN [ 6.097847] RIP: 0010:gpiochip_disable_irq+0x39/0x50 [ 6.097847] Code: 39 c6 48 19 c0 21 c6 48 c1 e6 05 48 03 b2 38 03 00 00 48 81 fe 00 f0 ff ff 77 11 48 8b 46 08 f6 c4 02 74 06 f0 80 66 09 fb c3 <0f> 0b 90 0f 1f 40 00 c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 [ 6.097847] RSP: 0000:ffffc9000000b830 EFLAGS: 00010046 [ 6.097847] RAX: 0000000000000045 RBX: ffff888001be02a0 RCX: 0000000000000008 [ 6.097847] RDX: ffff888001be9000 RSI: ffff888001b2dd00 RDI: ffff888001be02a0 [ 6.097847] RBP: ffffc9000000b860 R08: 0000000000000000 R09: 0000000000000000 [ 6.097847] R10: 0000000000000001 R11: ffff888001b2a154 R12: ffff888001be0514 [ 6.097847] R13: ffff888001be02a0 R14: 0000000000000008 R15: 0000000000000000 [ 6.097847] FS: 0000000000000000(0000) GS:ffff888041d80000(0000) knlGS:0000000000000000 [ 6.097847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.097847] CR2: 0000000000000000 CR3: 0000000003030000 CR4: 00000000001026b0 [ 6.097847] Call Trace: [ 6.097847] [ 6.097847] ? eqbr_irq_mask+0x63/0x70 [ 6.097847] ? no_action+0x10/0x10 [ 6.097847] eqbr_irq_mask_ack+0x11/0x60 In an other driver (drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c) the interrupt is not disabled here. To fix this, do not call the 'eqbr_irq_mask()' and 'eqbr_irq_ack()' function. Implement instead this directly without disabling the interrupts.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23310
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded bond_option_mode_set() already rejects mode changes that would make a loaded XDP program incompatible via bond_xdp_check(). However, bond_option_xmit_hash_policy_set() has no such guard. For 802.3ad and balance-xor modes, bond_xdp_check() returns false when xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually absent due to hardware offload. This means a user can: 1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode with a compatible xmit_hash_policy (e.g. layer2+3). 2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded. This leaves bond->xdp_prog set but bond_xdp_check() now returning false for the same device. When the bond is later destroyed, dev_xdp_uninstall() calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering: WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)) Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an XDP program is loaded on a bond in 802.3ad or balance-xor mode. commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP") introduced bond_xdp_check() which returns false for 802.3ad/balance-xor modes when xmit_hash_policy is vlan+srcmac. The check was wired into bond_xdp_set() to reject XDP attachment with an incompatible policy, but the symmetric path -- preventing xmit_hash_policy from being changed to an incompatible value after XDP is already loaded -- was left unguarded in bond_option_xmit_hash_policy_set(). Note: commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode") later added a similar guard to bond_option_mode_set(), but bond_option_xmit_hash_policy_set() remained unprotected.

Published: 2026-03-25Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23311
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix invalid wait context in ctx_sched_in() Lockdep found a bug in the event scheduling when a pinned event was failed and wakes up the threads in the ring buffer like below. It seems it should not grab a wait-queue lock under perf-context lock. Let's do it with irq_work. [ 39.913691] ============================= [ 39.914157] [ BUG: Invalid wait context ] [ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted [ 39.915271] ----------------------------- [ 39.915731] repro/837 is trying to lock: [ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60 [ 39.917182] other info that might help us debug this: [ 39.917761] context-{5:5} [ 39.918079] 4 locks held by repro/837: [ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0 [ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0 [ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0 [ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23312
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: validate USB endpoints The kaweth driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23313
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix preempt count leak in napi poll tracepoint Using get_cpu() in the tracepoint assignment causes an obvious preempt count leak because nothing invokes put_cpu() to undo it: softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101? This clearly has seen a lot of testing in the last 3+ years... Use smp_processor_id() instead.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23314
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio() In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns without calling of_node_put(child), causing the device node reference leak.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23315
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob access. [fix check to also cover mgmt->u.action.u.addba_req.capab, correct Fixes tag]

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23316
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix ARM64 alignment fault in multipath hash seed `struct sysctl_fib_multipath_hash_seed` contains two u32 fields (user_seed and mp_seed), making it an 8-byte structure with a 4-byte alignment requirement. In `fib_multipath_hash_from_keys()`, the code evaluates the entire struct atomically via `READ_ONCE()`: mp_seed = READ_ONCE(net->ipv4.sysctl_fib_multipath_hash_seed).mp_seed; While this silently works on GCC by falling back to unaligned regular loads which the ARM64 kernel tolerates, it causes a fatal kernel panic when compiled with Clang and LTO enabled. Commit e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y") strengthens `READ_ONCE()` to use Load-Acquire instructions (`ldar` / `ldapr`) to prevent compiler reordering bugs under Clang LTO. Since the macro evaluates the full 8-byte struct, Clang emits a 64-bit `ldar` instruction. ARM64 architecture strictly requires `ldar` to be naturally aligned, thus executing it on a 4-byte aligned address triggers a strict Alignment Fault (FSC = 0x21). Fix the read side by moving the `READ_ONCE()` directly to the `u32` member, which emits a safe 32-bit `ldar Wn`. Furthermore, Eric Dumazet pointed out that `WRITE_ONCE()` on the entire struct in `proc_fib_multipath_hash_set_seed()` is also flawed. Analysis shows that Clang splits this 8-byte write into two separate 32-bit `str` instructions. While this avoids an alignment fault, it destroys atomicity and exposes a tear-write vulnerability. Fix this by explicitly splitting the write into two 32-bit `WRITE_ONCE()` operations. Finally, add the missing `READ_ONCE()` when reading `user_seed` in `proc_fib_multipath_hash_seed()` to ensure proper pairing and concurrency safety.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23317
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Return the correct value in vmw_translate_ptr functions Before the referenced fixes these functions used a lookup function that returned a pointer. This was changed to another lookup function that returned an error code with the pointer becoming an out parameter. The error path when the lookup failed was not changed to reflect this change and the code continued to return the PTR_ERR of the now uninitialized pointer. This could cause the vmw_translate_ptr functions to return success when they actually failed causing further uninitialized and OOB accesses.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23318
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Use correct version for UAC3 header validation The entry of the validators table for UAC3 AC header descriptor is defined with the wrong protocol version UAC_VERSION_2, while it should have been UAC_VERSION_3. This results in the validator never matching for actual UAC3 devices (protocol == UAC_VERSION_3), causing their header descriptors to bypass validation entirely. A malicious USB device presenting a truncated UAC3 header could exploit this to cause out-of-bounds reads when the driver later accesses unvalidated descriptor fields. The bug was introduced in the same commit as the recently fixed UAC3 feature unit sub-type typo, and appears to be from the same copy-paste error when the UAC3 section was created from the UAC2 section.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23319
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim The root cause of this bug is that when 'bpf_link_put' reduces the refcount of 'shim_link->link.link' to zero, the resource is considered released but may still be referenced via 'tr->progs_hlist' in 'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in 'bpf_shim_tramp_link_release' is deferred. During this window, another process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'. Based on Martin KaFai Lau's suggestions, I have created a simple patch. To fix this: Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'. Only increment the refcount if it is not already zero. Testing: I verified the fix by adding a delay in 'bpf_shim_tramp_link_release' to make the bug easier to trigger: static void bpf_shim_tramp_link_release(struct bpf_link *link) { /* ... */ if (!shim_link->trampoline) return; + msleep(100); WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline, NULL)); bpf_trampoline_put(shim_link->trampoline); } Before the patch, running a PoC easily reproduced the crash(almost 100%) with a call trace similar to KaiyanM's report. After the patch, the bug no longer occurs even after millions of iterations.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23321
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always mark signal+subflow endp as used Syzkaller managed to find a combination of actions that was generating this warning: msk->pm.local_addr_used == 0 WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961 Modules linked in: CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline] RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline] RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210 Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a RSP: 0018:ffffc90001663880 EFLAGS: 00010293 RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640 R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650 FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0 Call Trace: genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:742 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2592 ___sys_sendmsg+0x2de/0x320 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66346f826d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8 R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770 The actions that caused that seem to be: - Set the MPTCP subflows limit to 0 - Create an MPTCP endpoint with both the 'signal' and 'subflow' flags - Create a new MPTCP connection from a different address: an ADD_ADDR linked to the MPTCP endpoint will be sent ('signal' flag), but no subflows is initiated ('subflow' flag) - Remove the MPTCP endpoint ---truncated---

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23322
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix use-after-free and list corruption on sender error The analysis from Breno: When the SMI sender returns an error, smi_work() delivers an error response but then jumps back to restart without cleaning up properly: 1. intf->curr_msg is not cleared, so no new message is pulled 2. newmsg still points to the message, causing sender() to be called again with the same message 3. If sender() fails again, deliver_err_response() is called with the same recv_msg that was already queued for delivery This causes list_add corruption ("list_add double add") because the recv_msg is added to the user_msgs list twice. Subsequently, the corrupted list leads to use-after-free when the memory is freed and reused, and eventually a NULL pointer dereference when accessing recv_msg->done. The buggy sequence: sender() fails -> deliver_err_response(recv_msg) // recv_msg queued for delivery -> goto restart // curr_msg not cleared! sender() fails again (same message!) -> deliver_err_response(recv_msg) // tries to queue same recv_msg -> LIST CORRUPTION Fix this by freeing the message and setting it to NULL on a send error. Also, always free the newmsg on a send error, otherwise it will leak.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23324
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: usb: etas_es58x: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23325
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23326
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix fragment node deletion to prevent buffer leak After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"), the list_node field is reused for both the xskb pool list and the buffer free list, this causes a buffer leak as described below. xp_free() checks if a buffer is already on the free list using list_empty(&xskb->list_node). When list_del() is used to remove a node from the xskb pool list, it doesn't reinitialize the node pointers. This means list_empty() will return false even after the node has been removed, causing xp_free() to incorrectly skip adding the buffer to the free list. Fix this by using list_del_init() instead of list_del() in all fragment handling paths, this ensures the list node is reinitialized after removal, allowing the list_empty() to work correctly.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23329
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: libie: don't unroll if fwlog isn't supported The libie_fwlog_deinit() function can be called during driver unload even when firmware logging was never properly initialized. This led to call trace: [ 148.576156] Oops: Oops: 0000 [#1] SMP NOPTI [ 148.576167] CPU: 80 UID: 0 PID: 12843 Comm: rmmod Kdump: loaded Not tainted 6.17.0-rc7next-queue-3oct-01915-g06d79d51cf51 #1 PREEMPT(full) [ 148.576177] Hardware name: HPE ProLiant DL385 Gen10 Plus/ProLiant DL385 Gen10 Plus, BIOS A42 07/18/2020 [ 148.576182] RIP: 0010:__dev_printk+0x16/0x70 [ 148.576196] Code: 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 55 41 54 49 89 d4 55 48 89 fd 53 48 85 f6 74 3c <4c> 8b 6e 50 48 89 f3 4d 85 ed 75 03 4c 8b 2e 48 89 df e8 f3 27 98 [ 148.576204] RSP: 0018:ffffd2fd7ea17a48 EFLAGS: 00010202 [ 148.576211] RAX: ffffd2fd7ea17aa0 RBX: ffff8eb288ae2000 RCX: 0000000000000000 [ 148.576217] RDX: ffffd2fd7ea17a70 RSI: 00000000000000c8 RDI: ffffffffb68d3d88 [ 148.576222] RBP: ffffffffb68d3d88 R08: 0000000000000000 R09: 0000000000000000 [ 148.576227] R10: 00000000000000c8 R11: ffff8eb2b1a49400 R12: ffffd2fd7ea17a70 [ 148.576231] R13: ffff8eb3141fb000 R14: ffffffffc1215b48 R15: ffffffffc1215bd8 [ 148.576236] FS: 00007f5666ba6740(0000) GS:ffff8eb2472b9000(0000) knlGS:0000000000000000 [ 148.576242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 148.576247] CR2: 0000000000000118 CR3: 000000011ad17000 CR4: 0000000000350ef0 [ 148.576252] Call Trace: [ 148.576258] [ 148.576269] _dev_warn+0x7c/0x96 [ 148.576290] libie_fwlog_deinit+0x112/0x117 [libie_fwlog] [ 148.576303] ixgbe_remove+0x63/0x290 [ixgbe] [ 148.576342] pci_device_remove+0x42/0xb0 [ 148.576354] device_release_driver_internal+0x19c/0x200 [ 148.576365] driver_detach+0x48/0x90 [ 148.576372] bus_remove_driver+0x6d/0xf0 [ 148.576383] pci_unregister_driver+0x2e/0xb0 [ 148.576393] ixgbe_exit_module+0x1c/0xd50 [ixgbe] [ 148.576430] __do_sys_delete_module.isra.0+0x1bc/0x2e0 [ 148.576446] do_syscall_64+0x7f/0x980 It can be reproduced by trying to unload ixgbe driver in recovery mode. Fix that by checking if fwlog is supported before doing unroll.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23330
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: complete pending data exchange on device close In nci_close_device(), complete any pending data exchange before closing. The data exchange callback (e.g. rawsock_data_exchange_complete) holds a socket reference. NIPA occasionally hits this leak: unreferenced object 0xff1100000f435000 (size 2048): comm "nci_dev", pid 3954, jiffies 4295441245 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc ec2b3c5): __kmalloc_noprof+0x4db/0x730 sk_prot_alloc.isra.0+0xe4/0x1d0 sk_alloc+0x36/0x760 rawsock_create+0xd1/0x540 nfc_sock_create+0x11f/0x280 __sock_create+0x22d/0x630 __sys_socket+0x115/0x1d0 __x64_sys_socket+0x72/0xd0 do_syscall_64+0x117/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23331
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected. Let's say we bind() an UDP socket to the wildcard address with a non-zero port, connect() it to an address, and disconnect it from the address. bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put the socket into the 4-tuple hash table. Then, __udp_disconnect() calls sk->sk_prot->rehash(sk). It computes a new hash based on the wildcard address and moves the socket to a new slot in the 4-tuple hash table, leaving a garbage in the chain that no packet hits. Let's remove such a socket from 4-tuple hash table when disconnected. Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after udp_hash4_dec(hslot2) in udp_unhash4().

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23332
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix crash during turbo disable When the system is booted with kernel command line argument "nosmt" or "maxcpus" to limit the number of CPUs, disabling turbo via: echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo results in a crash: PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI ... RIP: 0010:store_no_turbo+0x100/0x1f0 ... This occurs because for_each_possible_cpu() returns CPUs even if they are not online. For those CPUs, all_cpu_data[] will be NULL. Since commit 973207ae3d7c ("cpufreq: intel_pstate: Rearrange max frequency updates handling code"), all_cpu_data[] is dereferenced even for CPUs which are not online, causing the NULL pointer dereference. To fix that, pass CPU number to intel_pstate_update_max_freq() and use all_cpu_data[] for those CPUs for which there is a valid cpufreq policy.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23334
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: usb: f81604: handle short interrupt urb messages properly If an interrupt urb is received that is not the correct length, properly detect it and don't attempt to treat the data as valid.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23335
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah() struct irdma_create_ah_resp { // 8 bytes, no padding __u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx) __u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK }; rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata(). The reserved members of the structure were not zeroed.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23336
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23338
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings Userspace can either deliberately pass in the too small num_fences, or the required number can legitimately grow between the two calls to the userq wait ioctl. In both cases we do not want the emit the kernel warning backtrace since nothing is wrong with the kernel and userspace will simply get an errno reported back. So lets simply drop the WARN_ONs. (cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c)

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23339
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free skb on nci_transceive early error paths nci_transceive() takes ownership of the skb passed by the caller, but the -EPROTO, -EINVAL, and -EBUSY error paths return without freeing it. Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes the nci/nci_dev selftest hits the error path occasionally in NIPA, and kmemleak detects leaks: unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23340
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23342
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix race in cpumap on PREEMPT_RT On PREEMPT_RT kernels, the per-CPU xdp_bulk_queue (bq) can be accessed concurrently by multiple preemptible tasks on the same CPU. The original code assumes bq_enqueue() and __cpu_map_flush() run atomically with respect to each other on the same CPU, relying on local_bh_disable() to prevent preemption. However, on PREEMPT_RT, local_bh_disable() only calls migrate_disable() (when PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable preemption, which allows CFS scheduling to preempt a task during bq_flush_to_queue(), enabling another task on the same CPU to enter bq_enqueue() and operate on the same per-CPU bq concurrently. This leads to several races: 1. Double __list_del_clearprev(): after bq->count is reset in bq_flush_to_queue(), a preempting task can call bq_enqueue() -> bq_flush_to_queue() on the same bq when bq->count reaches CPU_MAP_BULK_SIZE. Both tasks then call __list_del_clearprev() on the same bq->flush_node, the second call dereferences the prev pointer that was already set to NULL by the first. 2. bq->count and bq->q[] races: concurrent bq_enqueue() can corrupt the packet queue while bq_flush_to_queue() is processing it. The race between task A (__cpu_map_flush -> bq_flush_to_queue) and task B (bq_enqueue -> bq_flush_to_queue) on the same CPU: Task A (xdp_do_flush) Task B (cpu_map_enqueue) ---------------------- ------------------------ bq_flush_to_queue(bq) spin_lock(&q->producer_lock) /* flush bq->q[] to ptr_ring */ bq->count = 0 spin_unlock(&q->producer_lock) bq_enqueue(rcpu, xdpf) <-- CFS preempts Task A --> bq->q[bq->count++] = xdpf /* ... more enqueues until full ... */ bq_flush_to_queue(bq) spin_lock(&q->producer_lock) /* flush to ptr_ring */ spin_unlock(&q->producer_lock) __list_del_clearprev(flush_node) /* sets flush_node.prev = NULL */ <-- Task A resumes --> __list_del_clearprev(flush_node) flush_node.prev->next = ... /* prev is NULL -> kernel oops */ Fix this by adding a local_lock_t to xdp_bulk_queue and acquiring it in bq_enqueue() and __cpu_map_flush(). These paths already run under local_bh_disable(), so use local_lock_nested_bh() which on non-RT is a pure annotation with no overhead, and on PREEMPT_RT provides a per-CPU sleeping lock that serializes access to the bq. To reproduce, insert an mdelay(100) between bq->count = 0 and __list_del_clearprev() in bq_flush_to_queue(), then run reproducer provided by syzkaller.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23343
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xdp: produce a warning when calculated tailroom is negative Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/ ---truncated---

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23345
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64: gcs: Do not set PTE_SHARED on GCS mappings if FEAT_LPA2 is enabled When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the shareability attribute with bits 50-51 of the output address. The _PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this matches the other _PAGE_* definitions) but using this macro directly leads to the following panic when enabling GCS on a system/model with LPA2: Unable to handle kernel paging request at virtual address fffff1ffc32d8008 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000 [fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025 pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : zap_huge_pmd+0x168/0x468 lr : zap_huge_pmd+0x2c/0x468 sp : ffff800080beb660 x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898 x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41 x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000 x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007 x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000 x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370 x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000 x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600 Call trace: zap_huge_pmd+0x168/0x468 (P) unmap_page_range+0xd70/0x1560 unmap_single_vma+0x48/0x80 unmap_vmas+0x90/0x180 unmap_region+0x88/0xe4 vms_complete_munmap_vmas+0xf8/0x1e0 do_vmi_align_munmap+0x158/0x180 do_vmi_munmap+0xac/0x160 __vm_munmap+0xb0/0x138 vm_munmap+0x14/0x20 gcs_free+0x70/0x80 mm_release+0x1c/0xc8 exit_mm_release+0x28/0x38 do_exit+0x190/0x8ec do_group_exit+0x34/0x90 get_signal+0x794/0x858 arch_do_signal_or_restart+0x11c/0x3e0 exit_to_user_mode_loop+0x10c/0x17c el0_da+0x8c/0x9c el0t_64_sync_handler+0xd0/0xf0 el0t_64_sync+0x198/0x19c Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420) Similarly to how the kernel handles protection_map[], use a gcs_page_prot variable to store the protection bits and clear PTE_SHARED if LPA2 is enabled. Also remove the unused PAGE_GCS{,_RO} macros.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23346
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64: io: Extract user memory type in ioremap_prot() The only caller of ioremap_prot() outside of the generic ioremap() implementation is generic_access_phys(), which passes a 'pgprot_t' value determined from the user mapping of the target 'pfn' being accessed by the kernel. On arm64, the 'pgprot_t' contains all of the non-address bits from the pte, including the permission controls, and so we end up returning a new user mapping from ioremap_prot() which faults when accessed from the kernel on systems with PAN: | Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000 | ... | Call trace: | __memcpy_fromio+0x80/0xf8 | generic_access_phys+0x20c/0x2b8 | __access_remote_vm+0x46c/0x5b8 | access_remote_vm+0x18/0x30 | environ_read+0x238/0x3e8 | vfs_read+0xe4/0x2b0 | ksys_read+0xcc/0x178 | __arm64_sys_read+0x4c/0x68 Extract only the memory type from the user 'pgprot_t' in ioremap_prot() and assert that we're being passed a user mapping, to protect us against any changes in future that may require additional handling. To avoid falsely flagging users of ioremap(), provide our own ioremap() macro which simply wraps __ioremap_prot().

Published: 2026-03-25Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23347
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: usb: f81604: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23348
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: cxl: Fix race of nvdimm_bus object when creating nvdimm objects Found issue during running of cxl-translate.sh unit test. Adding a 3s sleep right before the test seems to make the issue reproduce fairly consistently. The cxl_translate module has dependency on cxl_acpi and causes orphaned nvdimm objects to reprobe after cxl_acpi is removed. The nvdimm_bus object is registered by the cxl_nvb object when cxl_acpi_probe() is called. With the nvdimm_bus object missing, __nd_device_register() will trigger NULL pointer dereference when accessing the dev->parent that points to &nvdimm_bus->dev. [ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c [ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025 [ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core] [ 192.899459] RIP: 0010:kobject_get+0xc/0x90 [ 192.924871] Call Trace: [ 192.925959] [ 192.926976] ? pm_runtime_init+0xb9/0xe0 [ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm] [ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm] [ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem] [ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core] [ 192.943349] really_probe+0xde/0x380 This patch also relies on the previous change where devm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c instead of drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem. 1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the driver is probed synchronously when add_device() is called. 2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the cxl_nvb driver is attached during cxl_acpi_probe(). 3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in devm_cxl_add_nvdimm() before checking nvdimm_bus is valid. 4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe() will exit with -EBUSY. The removal of cxl_nvdimm devices should prevent any orphaned devices from probing once the nvdimm_bus is gone. [ dj: Fixed 0-day reported kdoc issue. ] [ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ]

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23349
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Fix condition effect bit clearing As reported by MPDarkGuy on discord, NULL pointer dereferences were happening because not all the conditional effects bits were cleared. Properly clear all conditional effect bits from ffbit

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23351
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23352
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/efi: defer freeing of boot services memory efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE and EFI_BOOT_SERVICES_DATA using memblock_free_late(). There are two issue with that: memblock_free_late() should be used for memory allocated with memblock_alloc() while the memory reserved with memblock_reserve() should be freed with free_reserved_area(). More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y efi_free_boot_services() is called before deferred initialization of the memory map is complete. Benjamin Herrenschmidt reports that this causes a leak of ~140MB of RAM on EC2 t3a.nano instances which only have 512MB or RAM. If the freed memory resides in the areas that memory map for them is still uninitialized, they won't be actually freed because memblock_free_late() calls memblock_free_pages() and the latter skips uninitialized pages. Using free_reserved_area() at this point is also problematic because __free_page() accesses the buddy of the freed page and that again might end up in uninitialized part of the memory map. Delaying the entire efi_free_boot_services() could be problematic because in addition to freeing boot services memory it updates efi.memmap without any synchronization and that's undesirable late in boot when there is concurrency. More robust approach is to only defer freeing of the EFI boot services memory. Split efi_free_boot_services() in two. First efi_unmap_boot_services() collects ranges that should be freed into an array then efi_free_boot_services() later frees them after deferred init is complete.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23354
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: x86/fred: Correct speculative safety in fred_extint() array_index_nospec() is no use if the result gets spilled to the stack, as it makes the believed safe-under-speculation value subject to memory predictions. For all practical purposes, this means array_index_nospec() must be used in the expression that accesses the array. As the code currently stands, it's the wrong side of irqentry_enter(), and 'index' is put into %ebp across the function call. Remove the index variable and reposition array_index_nospec(), so it's calculated immediately before the array access.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23356
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23357
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock in error path of mcp251x_open The mcp251x_open() function call free_irq() in its error path with the mpc_lock mutex held. But if an interrupt already occurred the interrupt handler will be waiting for the mpc_lock and free_irq() will deadlock waiting for the handler to finish. This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but for the error path. To solve this issue move the call to free_irq() after the lock is released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ handler will exit right away once it acquired the lock.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23358
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix error handling in slot reset If the device has not recovered after slot reset is called, it goes to out label for error handling. There it could make decision based on uninitialized hive pointer and could result in accessing an uninitialized list. Initialize the list and hive properly so that it handles the error situation and also releases the reset domain lock which is acquired during error_detected callback. (cherry picked from commit bb71362182e59caa227e4192da5a612b09349696)

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23359
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23360
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nvme: fix admin queue leak on controller reset When nvme_alloc_admin_tag_set() is called during a controller reset, a previous admin queue may still exist. Release it properly before allocating a new one to avoid orphaning the old queue. This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime").

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23361
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log]

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23362
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix locking for bcm_op runtime updates Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") added a locking for some variables that can be modified at runtime when updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup(). Usually the RX_SETUP only handles and filters incoming traffic with one exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is sent when a specific RTR frame is received. Therefore the rx bcm_op uses bcm_can_tx() which uses the bcm_tx_lock that was only initialized in bcm_tx_setup(). Add the missing spin_lock_init() when allocating the bcm_op in bcm_rx_setup() to handle the RTR case properly.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23363
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23364
HIGH7.4

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Compare MACs in constant time To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq().

Published: 2026-03-25Modified: 2026-06-19
CVSS 3.xHIGH 7.4
CVSS:3.x/CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N
References
CVE-2026-23365
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: validate USB endpoints The kalmia driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23366
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/client: Do not destroy NULL modes 'modes' in drm_client_modeset_probe may fail to kcalloc. If this occurs, we jump to 'out', calling modes_destroy on it, which dereferences it. This may result in a NULL pointer dereference in the error case. Prevent that.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23367
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: radiotap: reject radiotap with unknown bits The radiotap parser is currently only used with the radiotap namespace (not with vendor namespaces), but if the undefined field 18 is used, the alignment/size is unknown as well. In this case, iterator->_next_ns_data isn't initialized (it's only set for skipping vendor namespaces), and syzbot points out that we later compare against this uninitialized value. Fix this by moving the rejection of unknown radiotap fields down to after the in-namespace lookup, so it will really use iterator->_next_ns_data only for vendor namespaces, even in case undefined fields are present.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23368
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: phy: register phy led_triggers during probe to avoid AB-BA deadlock There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and LED_TRIGGER_PHY are enabled: [ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock); [ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234 [ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c [ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c [ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0 [ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0 [ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c [ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78 [ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock(); [ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0 [ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c [ 1362.104022] [<80014504>] syscall_common+0x34/0x58 Here LED_TRIGGER_PHY is registering LED triggers during phy_attach while holding RTNL and then taking triggers_list_lock. [ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock(); [ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4 [ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock); [ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c [ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc [ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c [ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4 [ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c [ 1362.232164] [<80014504>] syscall_common+0x34/0x58 Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes triggers_list_lock and then RTNL. A classical AB-BA deadlock. phy_led_triggers_registers() does not require the RTNL, it does not make any calls into the network stack which require protection. There is also no requirement the PHY has been attached to a MAC, the triggers only make use of phydev state. This allows the call to phy_led_triggers_registers() to be placed elsewhere. PHY probe() and release() don't hold RTNL, so solving the AB-BA deadlock.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23369
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock" This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1. Under rare circumstances, multiple udev threads can collect i801 device info on boot and walk i801_acpi_io_handler somewhat concurrently. The first will note the area is reserved by acpi to prevent further touches. This ultimately causes the area to be deregistered. The second will enter i801_acpi_io_handler after the area is unregistered but before a check can be made that the area is unregistered. i2c_lock_bus relies on the now unregistered area containing lock_ops to lock the bus. The end result is a kernel panic on boot with the following backtrace; [ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102) [ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 14.971880] #PF: supervisor read access in kernel mode [ 14.971884] #PF: error_code(0x0000) - not-present page [ 14.971887] PGD 0 P4D 0 [ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI [ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1 [ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023 [ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b [ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282 [ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568 [ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000 [ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028 [ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580 [ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000 [ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000 [ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0 [ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 14.971972] Call Trace: [ 14.971977] [ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df [ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df [ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972014] ? __die_body.cold+0x8/0xd [ 14.972021] ? page_fault_oops+0x132/0x170 [ 14.972028] ? exc_page_fault+0x61/0x150 [ 14.972036] ? asm_exc_page_fault+0x22/0x30 [ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801] [ 14.972085] acpi_ex_access_region+0x5b/0xd0 [ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0 [ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230 [ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310 [ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110 [ 14.972121] acpi_ds_exec_end_op+0x321/0x510 [ 14.972127] acpi_ps_parse_loop+0xf7/0x680 [ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0 [ 14.972143] acpi_ps_execute_method+0x137/0x270 [ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0 [ 14.972158] acpi_evaluate_object+0x134/0x2f0 [ 14.972164] acpi_evaluate_integer+0x50/0xe0 [ 14.972173] ? vsnprintf+0x24b/0x570 [ 14.972181] acpi_ac_get_state.part.0+0x23/0x70 [ 14.972189] get_ac_property+0x4e/0x60 [ 14.972195] power_supply_show_property+0x90/0x1f0 [ 14.972205] add_prop_uevent+0x29/0x90 [ 14.972213] power_supply_uevent+0x109/0x1d0 [ 14.972222] dev_uevent+0x10e/0x2f0 [ 14.972228] uevent_show+0x8e/0x100 [ 14.972236] dev_attr_show+0x19 ---truncated---

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23370
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data set_new_password() hex dumps the entire buffer, which contains plaintext password data, including current and new passwords. Remove the hex dump to avoid leaking credentials.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23372
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23373
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_config This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected behavior from the driver - other drivers default to 0 too.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23375
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm: thp: deny THP for files on anonymous inodes file_thp_enabled() incorrectly allows THP for files on anonymous inodes (e.g. guest_memfd and secretmem). These files are created via alloc_file_pseudo(), which does not call get_write_access() and leaves inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being true, they appear as read-only regular files when CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP collapse. Anonymous inodes can never pass the inode_is_open_for_write() check since their i_writecount is never incremented through the normal VFS open path. The right thing to do is to exclude them from THP eligibility altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real filesystem files (e.g. shared libraries), not for pseudo-filesystem inodes. For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create large folios in the page cache via the collapse path, but the guest_memfd fault handler does not support large folios. This triggers WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping(). For secretmem, collapse_file() tries to copy page contents through the direct map, but secretmem pages are removed from the direct map. This can result in a kernel crash: BUG: unable to handle page fault for address: ffff88810284d000 RIP: 0010:memcpy_orig+0x16/0x130 Call Trace: collapse_file hpage_collapse_scan_file madvise_collapse Secretmem is not affected by the crash on upstream as the memory failure recovery handles the failed copy gracefully, but it still triggers confusing false memory failure reports: Memory failure: 0x106d96f: recovery action for clean unevictable LRU page: Recovered Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all anonymous inode files.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23376
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nvmet-fcloop: Check remoteport port_state before calling done callback In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to fail and the nvme-fc transport layer itself will directly call nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free the lsrsp resources. Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state. If online, then lsrsp->done callback will free the lsrsp. Else, return -ENODEV to signal the nvme-fc transport to handle freeing lsrsp.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23378
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23379
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: fix divide by zero in the offload path Offloading ETS requires computing each class' WRR weight: this is done by averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned int, the same integer size as the individual DRR quanta, can overflow and even cause division by zero, like it happened in the following splat: Oops: divide error: 0000 [#1] SMP PTI CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Call Trace: ets_qdisc_change+0x870/0xf40 [sch_ets] qdisc_create+0x12b/0x540 tc_modify_qdisc+0x6d7/0xbd0 rtnetlink_rcv_msg+0x168/0x6b0 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x1d6/0x2b0 netlink_sendmsg+0x22e/0x470 ____sys_sendmsg+0x38a/0x3c0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x111/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f440b81c77e Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003 RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8 R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980 Modules linked in: sch_ets(E) netdevsim(E) ---[ end trace 0000000000000000 ]--- RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix this using 64-bit integers for 'q_sum' and 'q_psum'.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23380
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close When a process forks, the child process copies the parent's VMAs but the user_mapped reference count is not incremented. As a result, when both the parent and child processes exit, tracing_buffers_mmap_close() is called twice. On the second call, user_mapped is already 0, causing the function to return -ENODEV and triggering a WARN_ON. Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set. But this is only a hint, and the application can call madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the application does that, it can trigger this issue on fork. Fix it by incrementing the user_mapped reference count without re-mapping the pages in the VMA's open callback.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23381
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23382
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), we handle the fact that raw event callbacks can happen even for a HID device that has not been "claimed" causing a crash if a broken device were attempted to be connected to the system. Fix up the remaining in-tree HID drivers that forgot to add this same check to resolve the same issue.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23383
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23384
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: Fix kernel stack leak in ionic_create_cq() struct ionic_cq_resp resp { __u32 cqid[2]; // offset 0 - PARTIALLY SET (see below) __u8 udma_mask; // offset 8 - SET (resp.udma_mask = vcq->udma_mask) __u8 rsvd[7]; // offset 9 - NEVER SET <- LEAK }; rsvd[7]: 7 bytes of stack memory leaked unconditionally. cqid[2]: The loop at line 1256 iterates over udma_idx but skips indices where !(vcq->udma_mask & BIT(udma_idx)). The array has 2 entries but udma_count could be 1, meaning cqid[1] might never be written via ionic_create_cq_common(). If udma_mask only has bit 0 set, cqid[1] (4 bytes) is also leaked. So potentially 11 bytes leaked.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23385
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clone set on flush only Syzbot with fault injection triggered a failing memory allocation with GFP_KERNEL which results in a WARN splat: iter.err WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992 Modules linked in: CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026 RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845 Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43 +80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9 RSP: 0018:ffffc900045af780 EFLAGS: 00010293 RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40 RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000 RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0 R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920 FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0 Call Trace: __nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115 nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380 netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761 __sock_release net/socket.c:662 [inline] sock_close+0xc3/0x240 net/socket.c:1455 Restrict set clone to the flush set command in the preparation phase. Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree and pipapo backends to only clone the set when this iteration type is used. As for the existing NFT_ITER_UPDATE type, update the pipapo backend to use the existing set clone if available, otherwise use the existing set representation. After this update, there is no need to clone a set that is being deleted, this includes bound anonymous set. An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone interface and call it from the flush set path.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23386
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA buffer cleanup path. It iterates num_bufs times and attempts to unmap entries in the dma array. This leads to two issues: 1. The dma array shares storage with tx_qpl_buf_ids (union). Interpreting buffer IDs as DMA addresses results in attempting to unmap incorrect memory locations. 2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed the size of the dma array, causing out-of-bounds access warnings (trace below is how we noticed this issue). UBSAN: array-index-out-of-bounds in drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]') Workqueue: gve gve_service_task [gve] Call Trace: dump_stack_lvl+0x33/0xa0 __ubsan_handle_out_of_bounds+0xdc/0x110 gve_tx_stop_ring_dqo+0x182/0x200 [gve] gve_close+0x1be/0x450 [gve] gve_reset+0x99/0x120 [gve] gve_service_task+0x61/0x100 [gve] process_scheduled_works+0x1e9/0x380 Fix this by properly checking for QPL mode and delegating to gve_free_tx_qpl_bufs() to reclaim the buffers.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23387
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe() devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23388
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-23390
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson

Published: 2026-03-25Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23400
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rust_binder: call set_notification_done() without proc lock Consider the following sequence of events on a death listener: 1. The remote process dies and sends a BR_DEAD_BINDER message. 2. The local process invokes the BC_CLEAR_DEATH_NOTIFICATION command. 3. The local process then invokes the BC_DEAD_BINDER_DONE. Then, the kernel will reply to the BC_DEAD_BINDER_DONE command with a BR_CLEAR_DEATH_NOTIFICATION_DONE reply using push_work_if_looper(). However, this can result in a deadlock if the current thread is not a looper. This is because dead_binder_done() still holds the proc lock during set_notification_done(), which called push_work_if_looper(). Normally, push_work_if_looper() takes the thread lock, which is fine to take under the proc lock. But if the current thread is not a looper, then it falls back to delivering the reply to the process work queue, which involves taking the proc lock. Since the proc lock is already held, this is a deadlock. Fix this by releasing the proc lock during set_notification_done(). It was not intentional that it was held during that function to begin with. I don't think this ever happens in Android because BC_DEAD_BINDER_DONE is only invoked in response to BR_DEAD_BINDER messages, and the kernel always delivers BR_DEAD_BINDER to a looper. So there's no scenario where Android userspace will call BC_DEAD_BINDER_DONE on a non-looper thread.

Published: 2026-03-29Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23403
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix memory leak in verify_header The function sets `*ns = NULL` on every call, leaking the namespace string allocated in previous iterations when multiple profiles are unpacked. This also breaks namespace consistency checking since *ns is always NULL when the comparison is made. Remove the incorrect assignment. The caller (aa_unpack) initializes *ns to NULL once before the loop, which is sufficient.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23404
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: replace recursive profile removal with iterative approach The profile removal code uses recursion when removing nested profiles, which can lead to kernel stack exhaustion and system crashes. Reproducer: $ pf='a'; for ((i=0; i<1024; i++)); do echo -e "profile $pf { \n }" | apparmor_parser -K -a; pf="$pf//x"; done $ echo -n a > /sys/kernel/security/apparmor/.remove Replace the recursive __aa_profile_list_release() approach with an iterative approach in __remove_profile(). The function repeatedly finds and removes leaf profiles until the entire subtree is removed, maintaining the same removal semantic without recursion.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23405
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix: limit the number of levels of policy namespaces Currently the number of policy namespaces is not bounded relying on the user namespace limit. However policy namespaces aren't strictly tied to user namespaces and it is possible to create them and nest them arbitrarily deep which can be used to exhaust system resource. Hard cap policy namespaces to the same depth as user namespaces.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23406
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix side-effect bug in match_char() macro usage The match_char() macro evaluates its character parameter multiple times when traversing differential encoding chains. When invoked with *str++, the string pointer advances on each iteration of the inner do-while loop, causing the DFA to check different characters at each iteration and therefore skip input characters. This results in out-of-bounds reads when the pointer advances past the input buffer boundary. [ 94.984676] ================================================================== [ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760 [ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976 [ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 94.986329] Call Trace: [ 94.986341] [ 94.986347] dump_stack_lvl+0x5e/0x80 [ 94.986374] print_report+0xc8/0x270 [ 94.986384] ? aa_dfa_match+0x5ae/0x760 [ 94.986388] kasan_report+0x118/0x150 [ 94.986401] ? aa_dfa_match+0x5ae/0x760 [ 94.986405] aa_dfa_match+0x5ae/0x760 [ 94.986408] __aa_path_perm+0x131/0x400 [ 94.986418] aa_path_perm+0x219/0x2f0 [ 94.986424] apparmor_file_open+0x345/0x570 [ 94.986431] security_file_open+0x5c/0x140 [ 94.986442] do_dentry_open+0x2f6/0x1120 [ 94.986450] vfs_open+0x38/0x2b0 [ 94.986453] ? may_open+0x1e2/0x2b0 [ 94.986466] path_openat+0x231b/0x2b30 [ 94.986469] ? __x64_sys_openat+0xf8/0x130 [ 94.986477] do_file_open+0x19d/0x360 [ 94.986487] do_sys_openat2+0x98/0x100 [ 94.986491] __x64_sys_openat+0xf8/0x130 [ 94.986499] do_syscall_64+0x8e/0x660 [ 94.986515] ? count_memcg_events+0x15f/0x3c0 [ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986540] ? handle_mm_fault+0x1639/0x1ef0 [ 94.986551] ? vma_start_read+0xf0/0x320 [ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0 [ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0 [ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5 [ 94.986588] ? irqentry_exit+0x3c/0x590 [ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 94.986597] RIP: 0033:0x7fda4a79c3ea Fix by extracting the character value before invoking match_char, ensuring single evaluation per outer loop.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23407
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix missing bounds check on DEFAULT table in verify_dfa() The verify_dfa() function only checks DEFAULT_TABLE bounds when the state is not differentially encoded. When the verification loop traverses the differential encoding chain, it reads k = DEFAULT_TABLE[j] and uses k as an array index without validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count, therefore, causes both out-of-bounds reads and writes. [ 57.179855] ================================================================== [ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660 [ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993 [ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 57.181563] Call Trace: [ 57.181572] [ 57.181577] dump_stack_lvl+0x5e/0x80 [ 57.181596] print_report+0xc8/0x270 [ 57.181605] ? verify_dfa+0x59a/0x660 [ 57.181608] kasan_report+0x118/0x150 [ 57.181620] ? verify_dfa+0x59a/0x660 [ 57.181623] verify_dfa+0x59a/0x660 [ 57.181627] aa_dfa_unpack+0x1610/0x1740 [ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470 [ 57.181640] unpack_pdb+0x86d/0x46b0 [ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181656] ? aa_unpack_nameX+0x1a8/0x300 [ 57.181659] aa_unpack+0x20b0/0x4c30 [ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181664] ? stack_depot_save_flags+0x33/0x700 [ 57.181681] ? kasan_save_track+0x4f/0x80 [ 57.181683] ? kasan_save_track+0x3e/0x80 [ 57.181686] ? __kasan_kmalloc+0x93/0xb0 [ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130 [ 57.181697] ? policy_update+0x154/0x330 [ 57.181704] aa_replace_profiles+0x15a/0x1dd0 [ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181712] ? aa_loaddata_alloc+0x77/0x140 [ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181717] ? _copy_from_user+0x2a/0x70 [ 57.181730] policy_update+0x17a/0x330 [ 57.181733] profile_replace+0x153/0x1a0 [ 57.181735] ? rw_verify_area+0x93/0x2d0 [ 57.181740] vfs_write+0x235/0xab0 [ 57.181745] ksys_write+0xb0/0x170 [ 57.181748] do_syscall_64+0x8e/0x660 [ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 57.181765] RIP: 0033:0x7f6192792eb2 Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE entries unconditionally.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23408
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix double free of ns_name in aa_replace_profiles() if ns_name is NULL after 1071 error = aa_unpack(udata, &lh, &ns_name); and if ent->ns_name contains an ns_name in 1089 } else if (ent->ns_name) { then ns_name is assigned the ent->ns_name 1095 ns_name = ent->ns_name; however ent->ns_name is freed at 1262 aa_load_ent_free(ent); and then again when freeing ns_name at 1270 kfree(ns_name); Fix this by NULLing out ent->ns_name after it is transferred to ns_name ")

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23409
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix differential encoding verification Differential encoding allows loops to be created if it is abused. To prevent this the unpack should verify that a diff-encode chain terminates. Unfortunately the differential encode verification had two bugs. 1. it conflated states that had gone through check and already been marked, with states that were currently being checked and marked. This means that loops in the current chain being verified are treated as a chain that has already been verified. 2. the order bailout on already checked states compared current chain check iterators j,k instead of using the outer loop iterator i. Meaning a step backwards in states in the current chain verification was being mistaken for moving to an already verified state. Move to a double mark scheme where already verified states get a different mark, than the current chain being kept. This enables us to also drop the backwards verification check that was the cause of the second error as any already verified state is already marked.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23410
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race on rawdata dereference There is a race condition that leads to a use-after-free situation: because the rawdata inodes are not refcounted, an attacker can start open()ing one of the rawdata files, and at the same time remove the last reference to this rawdata (by removing the corresponding profile, for example), which frees its struct aa_loaddata; as a result, when seq_rawdata_open() is reached, i_private is a dangling pointer and freed memory is accessed. The rawdata inodes weren't refcounted to avoid a circular refcount and were supposed to be held by the profile rawdata reference. However during profile removal there is a window where the vfs and profile destruction race, resulting in the use after free. Fix this by moving to a double refcount scheme. Where the profile refcount on rawdata is used to break the circular dependency. Allowing for freeing of the rawdata once all inode references to the rawdata are put.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23411
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race between freeing data and fs accessing it AppArmor was putting the reference to i_private data on its end after removing the original entry from the file system. However the inode can aand does live beyond that point and it is possible that some of the fs call back functions will be invoked after the reference has been put, which results in a race between freeing the data and accessing it through the fs. While the rawdata/loaddata is the most likely candidate to fail the race, as it has the fewest references. If properly crafted it might be possible to trigger a race for the other types stored in i_private. Fix this by moving the put of i_private referenced data to the correct place which is during inode eviction.

Published: 2026-04-01Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-23418
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/xe/reg_sr: Fix leak on xa_store failure Free the newly allocated entry when xa_store() fails to avoid a memory leak on the error path. v2: use goto fail_free. (Bala) (cherry picked from commit 6bc6fec71ac45f52db609af4e62bdb96b9f5fadb)

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23419
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/rds: Fix circular locking dependency in rds_tcp_tune syzbot reported a circular locking dependency in rds_tcp_tune() where sk_net_refcnt_upgrade() is called while holding the socket lock: ====================================================== WARNING: possible circular locking dependency detected ====================================================== kworker/u10:8/15040 is trying to acquire lock: ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_cache_noprof+0x4b/0x6f0 but task is already holding lock: ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: rds_tcp_tune+0xd7/0x930 The issue occurs because sk_net_refcnt_upgrade() performs memory allocation (via get_net_track() -> ref_tracker_alloc()) while the socket lock is held, creating a circular dependency with fs_reclaim. Fix this by moving sk_net_refcnt_upgrade() outside the socket lock critical section. This is safe because the fields modified by the sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not accessed by any concurrent code path at this point. v2: - Corrected fixes tag - check patch line wrap nits - ai commentary nits

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23420
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Fix a locking bug Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer.

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23421
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/xe/configfs: Free ctx_restore_mid_bb in release ctx_restore_mid_bb memory is allocated in wa_bb_store(), but xe_config_device_release() only frees ctx_restore_post_bb. Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation when the configfs device is removed. (cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f)

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23423
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: free pages on error in btrfs_uring_read_extent() In this function the 'pages' object is never freed in the hopes that it is picked up by btrfs_uring_read_finished() whenever that executes in the future. But that's just the happy path. Along the way previous allocations might have gone wrong, or we might not get -EIOCBQUEUED from btrfs_encoded_read_regular_fill_pages(). In all these cases, we go to a cleanup section that frees all memory allocated by this function without assuming any deferred execution, and this also needs to happen for the 'pages' allocation.

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23424
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Validate command buffer payload count The count field in the command header is used to determine the valid payload size. Verify that the valid payload does not exceed the remaining buffer space.

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23425
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix ID register initialization for non-protected pKVM guests In protected mode, the hypervisor maintains a separate instance of the `kvm` structure for each VM. For non-protected VMs, this structure is initialized from the host's `kvm` state. Currently, `pkvm_init_features_from_host()` copies the `KVM_ARCH_FLAG_ID_REGS_INITIALIZED` flag from the host without the underlying `id_regs` data being initialized. This results in the hypervisor seeing the flag as set while the ID registers remain zeroed. Consequently, `kvm_has_feat()` checks at EL2 fail (return 0) for non-protected VMs. This breaks logic that relies on feature detection, such as `ctxt_has_tcrx()` for TCR2_EL1 support. As a result, certain system registers (e.g., TCR2_EL1, PIR_EL1, POR_EL1) are not saved/restored during the world switch, which could lead to state corruption. Fix this by explicitly copying the ID registers from the host `kvm` to the hypervisor `kvm` for non-protected VMs during initialization, since we trust the host with its non-protected guests' features. Also ensure `KVM_ARCH_FLAG_ID_REGS_INITIALIZED` is cleared initially in `pkvm_init_features_from_host` so that `vm_copy_id_regs` can properly initialize them and set the flag once done.

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-23426
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/logicvc: Fix device node reference leak in logicvc_drm_config_parse() The logicvc_drm_config_parse() function calls of_get_child_by_name() to find the "layers" node but fails to release the reference, leading to a device node reference leak. Fix this by using the __free(device_node) cleanup attribute to automatic release the reference when the variable goes out of scope.

Published: 2026-04-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31405
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: media: dvb-net: fix OOB access in ULE extension header tables The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables in handle_one_ule_extension() are declared with 255 elements (valid indices 0-254), but the index htype is derived from network-controlled data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When htype equals 255, an out-of-bounds read occurs on the function pointer table, and the OOB value may be called as a function pointer. Add a bounds check on htype against the array size before either table is accessed. Out-of-range values now cause the SNDU to be discarded.

Published: 2026-04-06Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-31411
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix crash due to unvalidated vcc pointer in sigd_send() Reproducer available at [1]. The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc pointer from msg->vcc and uses it directly without any validation. This pointer comes from userspace via sendmsg() and can be arbitrarily forged: int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0); ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon struct msghdr msg = { .msg_iov = &iov, ... }; *(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef In normal operation, the kernel sends the vcc pointer to the signaling daemon via sigd_enq() when processing operations like connect(), bind(), or listen(). The daemon is expected to return the same pointer when responding. However, a malicious daemon can send arbitrary pointer values. Fix this by introducing find_get_vcc() which validates the pointer by searching through vcc_hash (similar to how sigd_close() iterates over all VCCs), and acquires a reference via sock_hold() if found. Since struct atm_vcc embeds struct sock as its first member, they share the same lifetime. Therefore using sock_hold/sock_put is sufficient to keep the vcc alive while it is being used. Note that there may be a race with sigd_close() which could mark the vcc with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns. However, sock_hold() guarantees the memory remains valid, so this race only affects the logical state, not memory safety. [1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3

Published: 2026-04-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31412
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks() The `check_command_size_in_blocks()` function calculates the data size in bytes by left shifting `common->data_size_from_cmnd` by the block size (`common->curlun->blkbits`). However, it does not validate whether this shift operation will cause an integer overflow. Initially, the block size is set up in `fsg_lun_open()` , and the `common->data_size_from_cmnd` is set up in `do_scsi_command()`. During initialization, there is no integer overflow check for the interaction between two variables. So if a malicious USB host sends a SCSI READ or WRITE command requesting a large amount of data (`common->data_size_from_cmnd`), the left shift operation can wrap around. This results in a truncated data size, which can bypass boundary checks and potentially lead to memory corruption or out-of-bounds accesses. Fix this by using the check_shl_overflow() macro to safely perform the shift and catch any overflows.

Published: 2026-04-10Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31535
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: smb: client: make use of smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer.

Published: 2026-04-24Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31536
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: smb: server: let send_done handle a completion without IB_SEND_SIGNALED With smbdirect_send_batch processing we likely have requests without IB_SEND_SIGNALED, which will be destroyed in the final request that has IB_SEND_SIGNALED set. If the connection is broken all requests are signaled even without explicit IB_SEND_SIGNALED.

Published: 2026-04-24Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-31537
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: smb: server: make use of smbdirect_socket.send_io.bcredits It turns out that our code will corrupt the stream of reassabled data transfer messages when we trigger an immendiate (empty) send. In order to fix this we'll have a single 'batch' credit per connection. And code getting that credit is free to use as much messages until remaining_length reaches 0, then the batch credit it given back and the next logical send can happen.

Published: 2026-04-24Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31538
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: smb: server: make use of smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer. This fixes regression Namjae reported with the 6.18 release.

Published: 2026-04-24Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31539
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: introduce smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer.

Published: 2026-04-24Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31687
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gpio: omap: do not register driver in probe() Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the omap_mpuio_driver from omap_mpuio_init(), which is called from omap_gpio_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a potential deadlock condition described in [1]. Additionally, the omap_mpuio_driver is never unregistered from the driver core, even if the module is unloaded. Hence, register the omap_mpuio_driver from the module initcall and unregister it in module_exit().

Published: 2026-04-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-31693
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: cifs: some missing initializations on replay In several places in the code, we have a label to signify the start of the code where a request can be replayed if necessary. However, some of these places were missing the necessary reinitializations of certain local variables before replay. This change makes sure that these variables get initialized after the label.

Published: 2026-04-30Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43121
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_ref race between scrub and refill paths The io_zcrx_put_niov_uref() function uses a non-atomic check-then-decrement pattern (atomic_read followed by separate atomic_dec) to manipulate user_refs. This is serialized against other callers by rq_lock, but io_zcrx_scrub() modifies the same counter with atomic_xchg() WITHOUT holding rq_lock. On SMP systems, the following race exists: CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock) put_niov_uref: atomic_read(uref) - 1 // window opens atomic_xchg(uref, 0) - 1 return_niov_freelist(niov) [PUSH #1] // window closes atomic_dec(uref) - wraps to -1 returns true return_niov(niov) return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE] The same niov is pushed to the freelist twice, causing free_count to exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds write (a u32 value) past the kvmalloc'd freelist array into the adjacent slab object. Fix this by replacing the non-atomic read-then-dec in io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically tests and decrements user_refs. This makes the operation safe against concurrent atomic_xchg from scrub without requiring scrub to acquire rq_lock. [pavel: removed a warning and a comment]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43123
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbcon: check return value of con2fb_acquire_newinfo() If fbcon_open() fails when called from con2fb_acquire_newinfo() then info->fbcon_par pointer remains NULL which is later dereferenced. Add check for return value of the function con2fb_acquire_newinfo() to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43124
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43125
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: dlm: validate length in dlm_search_rsb_tree The len parameter in dlm_dump_rsb_name() is not validated and comes from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can cause out-of-bounds write in dlm_search_rsb_tree(). Add length validation to prevent potential buffer overflow.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43126
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43127
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix circular locking dependency in run_unpack_ex Syzbot reported a circular locking dependency between wnd->rw_lock (sbi->used.bitmap) and ni->file.run_lock. The deadlock scenario: 1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock. 2. run_unpack_ex() takes wnd->rw_lock then tries to acquire ni->file.run_lock inside ntfs_refresh_zone(). This creates an AB-BA deadlock. Fix this by using down_read_trylock() instead of down_read() when acquiring run_lock in run_unpack_ex(). If the lock is contended, skip ntfs_refresh_zone() - the MFT zone will be refreshed on the next MFT operation. This breaks the circular dependency since we never block waiting for run_lock while holding wnd->rw_lock.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43128
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix double dma_buf_unpin in failure path In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf is immediately unpinned but the umem_dmabuf->pinned flag is still set. Then, when ib_umem_release() is called, it calls ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again. Fix this by removing the immediate unpin upon failure and just let the ib_umem_release/revoke path handle it. This also ensures the proper unmap-unpin unwind ordering if the dmabuf_map_pages call happened to fail due to dma_resv_wait_timeout (and therefore has a non-NULL umem_dmabuf->sgt).

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43129
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ima: verify the previous kernel's IMA buffer lies in addressable RAM Patch series "Address page fault in ima_restore_measurement_list()", v3. When the second-stage kernel is booted via kexec with a limiting command line such as "mem=" we observe a pafe fault that happens. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) not-present page This happens on x86_64 only, as this is already fixed in aarch64 in commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") This patch (of 3): When the second-stage kernel is booted with a limiting command line (e.g. "mem="), the IMA measurement buffer handed over from the previous kernel may fall outside the addressable RAM of the new kernel. Accessing such a buffer can fault during early restore. Introduce a small generic helper, ima_validate_range(), which verifies that a physical [start, end] range for the previous-kernel IMA buffer lies within addressable memory: - On x86, use pfn_range_is_mapped(). - On OF based architectures, use page_is_ram().

Published: 2026-05-06Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43130
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_flush_dev_iotlb intel_pasid_tear_down_entry device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fput Although pci_device_is_present() is slower than pci_dev_is_disconnected(), it still takes only ~70 µs on a ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed and width increase. Besides, devtlb_invalidation_with_pasid() is called only in the paths below, which are far less frequent than memory map/unmap. 1. mm-struct release 2. {attach,release}_dev 3. set/remove PASID 4. dirty-tracking setup The gain in system stability far outweighs the negligible cost of using pci_device_is_present() instead of pci_dev_is_disconnected() to decide when to skip ATS invalidation, especially under GDR high-load conditions.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43132
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43133
HIGH7.9

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.9
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:H
References
CVE-2026-43134
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.1
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N
References
CVE-2026-43135
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Add missing unmap in snd_cx23885_hw_params() In error path, add cx23885_alsa_dma_unmap() to release the resource acquired by cx23885_alsa_dma_map().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43136
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43137
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix NULL pointer dereference If there's a mismatch between the DAI links in the machine driver and the topology, it is possible that the playback/capture widget is not set, especially in the case of loopback capture for echo reference where we use the dummy DAI link. Return the error when the widget is not set to avoid a null pointer dereference like below when the topology is broken. RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43138
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: reset: gpio: suppress bind attributes in sysfs This is a special device that's created dynamically and is supposed to stay in memory forever. We also currently don't have a devlink between it and the actual reset consumer. Suppress sysfs bind attributes so that user-space can't unbind the device because - as of now - it will cause a use-after-free splat from any user that puts the reset control handle.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43139
HIGH8.6

In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.6
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H
References
CVE-2026-43140
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: Do not crash on missing msc->input Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, msc->input stays NULL, leading to a crash at a later time. Detect this condition in the input_configured() hook and reject the device. This is not supposed to happen with actual magic mouse devices, but can be provoked by imposing as a magic mouse USB device.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43141
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43142
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: iris: gen1: Destroy internal buffers after FW releases After the firmware releases internal buffers, the driver was not destroying them. This left stale allocations that were no longer used, especially across resolution changes where new buffers are allocated per the updated requirements. As a result, memory was wasted until session close. Destroy internal buffers once the release response is received from the firmware.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43143
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mfd: core: Add locking around 'mfd_of_node_list' Manipulating a list in the kernel isn't safe without some sort of mutual exclusion. Add a mutex any time we access / modify 'mfd_of_node_list' to prevent possible crashes.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43144
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential kernel oops when probe fails When probe of the sdio brcmfmac device fails for some reasons (i.e. missing firmware), the sdiodev->bus is set to error instead of NULL, thus the cleanup later in brcmf_sdio_remove() tries to free resources via invalid bus pointer. This happens because sdiodev->bus is set 2 times: first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix this by chaning the brcmf_sdio_probe() function to return the error code and set sdio->bus only there.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43145
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Fix invalid loaded resource table detection imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded resource table even when the current firmware does not provide one. When the device tree contains a "rsc-table" entry, priv->rsc_table is non-NULL and denotes where a resource table would be located if one is present in memory. However, when the current firmware has no resource table, rproc->table_ptr is NULL. The function still returns priv->rsc_table, and the remoteproc core interprets this as a valid loaded resource table. Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when there is no resource table for the current firmware (i.e. when rproc->table_ptr is NULL). This aligns the function's semantics with the remoteproc core: a loaded resource table is only reported when a valid table_ptr exists. With this change, starting firmware without a resource table no longer triggers a crash.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43146
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: iris: Add buffer to list only after successful allocation Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating internal buffers. Previously, the buffer was enqueued in `buffers->list` before the DMA allocation. If the allocation failed, the function returned `-ENOMEM` while leaving a partially initialized buffer in the list, which could lead to inconsistent state and potential leaks. By adding the buffer to the list only after `dma_alloc_attrs()` succeeds, we ensure the list contains only valid, fully initialized buffers.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43147
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV" This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"), which causes a deadlock by recursively taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of pci_stop_and_remove_bus_device(). For example with the following sequence of commands: $ echo > /sys/bus/pci/devices//sriov_numvfs $ echo 1 > /sys/bus/pci/devices//remove A trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acquire lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140 but task is already holding lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80 ... Call Trace: [<00000259778c4f90>] dump_stack_lvl+0xc0/0x110 [<00000259779c844e>] print_deadlock_bug+0x31e/0x330 [<00000259779c1908>] __lock_acquire+0x16c8/0x32f0 [<00000259779bffac>] lock_acquire+0x14c/0x350 [<00000259789643a6>] __mutex_lock_common+0xe6/0x1520 [<000002597896413c>] mutex_lock_nested+0x3c/0x50 [<00000259784a07e4>] sriov_disable+0x34/0x140 [<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core] [<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core] [<00000259784857fc>] pci_device_remove+0x3c/0xa0 [<000002597851012e>] device_release_driver_internal+0x18e/0x280 [<000002597847ae22>] pci_stop_bus_device+0x82/0xa0 [<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80 [<00000259784972c2>] remove_store+0x72/0x90 [<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200 [<0000025977d7241c>] vfs_write+0x24c/0x300 [<0000025977d72696>] ksys_write+0x86/0x110 [<000002597895b61c>] __do_syscall+0x14c/0x400 [<000002597896e0ee>] system_call+0x6e/0x90 This alone is not a complete fix as it restores the issue the cited commit tried to solve. A new fix will be provided as a follow on.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43148
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() As kcalloc() may fail, check its return value to avoid a NULL pointer dereference when passing it to of_property_read_u32_array().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43149
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean() The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43150
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: perf/arm-cmn: Reject unsupported hardware configurations So far we've been fairly lax about accepting both unknown CMN models (at least with a warning), and unknown revisions of those which we do know, as although things do frequently change between releases, typically enough remains the same to be somewhat useful for at least some basic bringup checks. However, we also make assumptions of the maximum supported sizes and numbers of things in various places, and there's no guarantee that something new might not be bigger and lead to nasty array overflows. Make sure we only try to run on things that actually match our assumptions and so will not risk memory corruption. We have at least always failed on completely unknown node types, so update that error message for clarity and consistency too.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43151
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: Revert "media: iris: Add sanity check for stop streaming" This reverts commit ad699fa78b59241c9d71a8cafb51525f3dab04d4. Revert the check that skipped stop_streaming when the instance was in IRIS_INST_ERROR, as it caused multiple regressions: 1. Buffers were not returned to vb2 when the instance was already in error state, triggering warnings in the vb2 core because buffer completion was skipped. 2. If a session failed early (e.g. unsupported configuration), the instance transitioned to IRIS_INST_ERROR. When userspace attempted to stop streaming for cleanup, stop_streaming was skipped due to the added check, preventing proper teardown and leaving the firmware in an inconsistent state.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43152
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: hid-pl: handle probe errors Errors in init must be reported back or we'll follow a NULL pointer the first time FF is used.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43153
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: xfs: remove xfs_attr_leaf_hasname The calling convention of xfs_attr_leaf_hasname() is problematic, because it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a non-NULL buffer pointer for an already released buffer when xfs_attr3_leaf_lookup_int fails with other error values. Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so that the buffer release code is done by each caller of xfs_attr3_leaf_read.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43154
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: erofs: fix incorrect early exits in volume label handling Crafted EROFS images containing valid volume labels can trigger incorrect early returns, leading to folio reference leaks. However, this does not cause system crashes or other severe issues.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43155
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mux: mmio: fix regmap leak on probe failure The mmio regmap that may be allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43156
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: enable basic endpoint checking pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time, and avoid triggering assertion. Similar fix to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") - commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking")

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43157
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: fix bitmap leaks The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap) are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit(). Unbinding and rebinding the driver therefore triggers kmemleak: unreferenced object (size 16): backtrace: rvu_alloc_bitmap cgx_probe Free both bitmaps during teardown.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43158
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: xfs: fix freemap adjustments when adding xattrs to leaf blocks xfs/592 and xfs/794 both trip this assertion in the leaf block freemap adjustment code after ~20 minutes of running on my test VMs: ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t) + xfs_attr3_leaf_hdr_size(leaf)); Upon enabling quite a lot more debugging code, I narrowed this down to fsstress trying to set a local extended attribute with namelen=3 and valuelen=71. This results in an entry size of 80 bytes. At the start of xfs_attr3_leaf_add_work, the freemap looks like this: i 0 base 448 size 0 rhs 448 count 46 i 1 base 388 size 132 rhs 448 count 46 i 2 base 2120 size 4 rhs 448 count 46 firstused = 520 where "rhs" is the first byte past the end of the leaf entry array. This is inconsistent -- the entries array ends at byte 448, but freemap[1] says there's free space starting at byte 388! By the end of the function, the freemap is in worse shape: i 0 base 456 size 0 rhs 456 count 47 i 1 base 388 size 52 rhs 456 count 47 i 2 base 2120 size 4 rhs 456 count 47 firstused = 440 Important note: 388 is not aligned with the entries array element size of 8 bytes. Based on the incorrect freemap, the name area starts at byte 440, which is below the end of the entries array! That's why the assertion triggers and the filesystem shuts down. How did we end up here? First, recall from the previous patch that the freemap array in an xattr leaf block is not intended to be a comprehensive map of all free space in the leaf block. In other words, it's perfectly legal to have a leaf block with: * 376 bytes in use by the entries array * freemap[0] has [base = 376, size = 8] * freemap[1] has [base = 388, size = 1500] * the space between 376 and 388 is free, but the freemap stopped tracking that some time ago If we add one xattr, the entries array grows to 384 bytes, and freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we add a second xattr, the entries array grows to 392 bytes, and freemap[0] gets pushed up to [base = 392, size = 0]. This is bad, because freemap[1] hasn't been updated, and now the entries array and the free space claim the same space. The fix here is to adjust all freemap entries so that none of them collide with the entries array. Note that this fix relies on commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and the previous patch that resets zero length freemap entries to have base = 0.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43159
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix null dereference in find_network The variable pwlan has the possibility of being NULL when passed into rtw_free_network_nolock() which would later dereference the variable.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43160
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mfd: macsmc: Initialize mutex Initialize struct apple_smc's mutex in apple_smc_probe(). Using the mutex uninitialized surprisingly resulted only in occasional NULL pointer dereferences in apple_smc_read() calls from the probe() functions of sub devices.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43161
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode PCIe endpoints with ATS enabled and passed through to userspace (e.g., QEMU, DPDK) can hard-lock the host when their link drops, either by surprise removal or by a link fault. Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") adds pci_dev_is_disconnected() to devtlb_invalidation_with_pasid() so ATS invalidation is skipped only when the device is being safely removed, but it applies only when Intel IOMMU scalable mode is enabled. With scalable mode disabled or unsupported, a system hard-lock occurs when a PCIe endpoint's link drops because the Intel IOMMU waits indefinitely for an ATS invalidation that cannot complete. Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 domain_context_clear_one_cb pci_for_each_dma_alias device_block_translation blocking_domain_attach_dev iommu_deinit_device __iommu_group_remove_device iommu_release_device iommu_bus_notifier blocking_notifier_call_chain bus_notify device_del pci_remove_bus_device pci_stop_and_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_ist Commit 81e921fd3216 ("iommu/vt-d: Fix NULL domain on device release") adds intel_pasid_teardown_sm_context() to intel_iommu_release_device(), which calls qi_flush_dev_iotlb() and can also hard-lock the system when a PCIe endpoint's link drops. Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 intel_context_flush_no_pasid device_pasid_table_teardown pci_pasid_table_teardown pci_for_each_dma_alias intel_pasid_teardown_sm_context intel_iommu_release_device iommu_deinit_device __iommu_group_remove_device iommu_release_device iommu_bus_notifier blocking_notifier_call_chain bus_notify device_del pci_remove_bus_device pci_stop_and_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_ist Sometimes the endpoint loses connection without a link-down event (e.g., due to a link fault); killing the process (virsh destroy) then hard-locks the host. Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 domain_context_clear_one_cb pci_for_each_dma_alias device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fput pci_dev_is_disconnected() only covers safe-removal paths; pci_device_is_present() tests accessibility by reading vendor/device IDs and internally calls pci_dev_is_disconnected(). On a ConnectX-5 (8 GT/s, x2) this costs ~70 µs. Since __context_flush_dev_iotlb() is only called on {attach,release}_dev paths (not hot), add pci_device_is_present() there to skip inaccessible devices and avoid the hard-lock.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43162
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: tegra-video: Fix memory leak in __tegra_channel_try_format() The state object allocated by __v4l2_subdev_state_alloc() must be freed with __v4l2_subdev_state_free() when it is no longer needed. In __tegra_channel_try_format(), two error paths return directly after v4l2_subdev_call() fails, without freeing the allocated 'sd_state' object. This violates the requirement and causes a memory leak. Fix this by introducing a cleanup label and using goto statements in the error paths to ensure that __v4l2_subdev_state_free() is always called before the function returns.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43163
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: md/bitmap: fix GPF in write_page caused by resize race A General Protection Fault occurs in write_page() during array resize: RIP: 0010:write_page+0x22b/0x3c0 [md_mod] This is a use-after-free race between bitmap_daemon_work() and __bitmap_resize(). The daemon iterates over `bitmap->storage.filemap` without locking, while the resize path frees that storage via md_bitmap_file_unmap(). `quiesce()` does not stop the md thread, allowing concurrent access to freed pages. Fix by holding `mddev->bitmap_info.mutex` during the bitmap update.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43164
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: udplite: Fix null-ptr-deref in __udp_enqueue_schedule_skb(). syzbot reported null-ptr-deref of udp_sk(sk)->udp_prod_queue. [0] Since the cited commit, udp_lib_init_sock() can fail, as can udp_init_sock() and udpv6_init_sock(). Let's handle the error in udplite_sk_init() and udplitev6_sk_init(). [0]: BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:82 [inline] BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] BUG: KASAN: null-ptr-deref in __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719 Read of size 4 at addr 0000000000000008 by task syz.2.18/2944 CPU: 1 UID: 0 PID: 2944 Comm: syz.2.18 Not tainted syzkaller #0 PREEMPTLAZY Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 kasan_report+0xa2/0xe0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200 instrument_atomic_read include/linux/instrumented.h:82 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719 __udpv6_queue_rcv_skb net/ipv6/udp.c:795 [inline] udpv6_queue_rcv_one_skb+0xa2e/0x1ad0 net/ipv6/udp.c:906 udp6_unicast_rcv_skb+0x227/0x380 net/ipv6/udp.c:1064 ip6_protocol_deliver_rcu+0xe17/0x1540 net/ipv6/ip6_input.c:438 ip6_input_finish+0x191/0x350 net/ipv6/ip6_input.c:489 NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318 ip6_input+0x16c/0x2b0 net/ipv6/ip6_input.c:500 NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6149 [inline] __netif_receive_skb+0xd3/0x370 net/core/dev.c:6262 process_backlog+0x4d6/0x1160 net/core/dev.c:6614 __napi_poll+0xae/0x320 net/core/dev.c:7678 napi_poll net/core/dev.c:7741 [inline] net_rx_action+0x60d/0xdc0 net/core/dev.c:7893 handle_softirqs+0x209/0x8d0 kernel/softirq.c:622 do_softirq+0x52/0x90 kernel/softirq.c:523 __local_bh_enable_ip+0xe7/0x120 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x109c/0x2dc0 net/core/dev.c:4856 __ip6_finish_output net/ipv6/ip6_output.c:-1 [inline] ip6_finish_output+0x158/0x4e0 net/ipv6/ip6_output.c:219 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x342/0x580 net/ipv6/ip6_output.c:246 ip6_send_skb+0x1d7/0x3c0 net/ipv6/ip6_output.c:1984 udp_v6_send_skb+0x9a5/0x1770 net/ipv6/udp.c:1442 udp_v6_push_pending_frames+0xa2/0x140 net/ipv6/udp.c:1469 udpv6_sendmsg+0xfe0/0x2830 net/ipv6/udp.c:1759 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe5/0x270 net/socket.c:742 __sys_sendto+0x3eb/0x580 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd2/0xf20 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f67b4d9c629 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f67b5c98028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f67b5015fa0 RCX: 00007f67b4d9c629 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f67b4e32b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000040000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f67b5016038 R14: 00007f67b5015fa0 R15: 00007ffe3cb66dd8

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43165
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In nct7363_present_pwm_fanin, it does not release the reference, causing a resource leak.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43166
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced plain identification for encoded extents Only plain data whose start position and on-disk physical length are both aligned to the block size should be classified as interlaced plain extents. Otherwise, it must be treated as shifted plain extents. This issue was found by syzbot using a crafted compressed image containing plain extents with unaligned physical lengths, which can cause OOB read in z_erofs_transform_plain().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H
References
CVE-2026-43167
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: xfrm: always flush state and policy upon NETDEV_UNREGISTER event syzbot is reporting that "struct xfrm_state" refcount is leaking. unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2 ref_tracker: netdev@ffff888052f24618 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_tracker_alloc include/linux/netdevice.h:4412 [inline] xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316 xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline] xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022 xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550 xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2646 __sys_sendmsg+0x16d/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") implemented xfrm_dev_unregister() as no-op despite xfrm_dev_state_add() from xfrm_state_construct() acquires a reference to "struct net_device". I guess that that commit expected that NETDEV_DOWN event is fired before NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add() is called only if (dev->features & NETIF_F_HW_ESP) != 0. Sabrina Dubroca identified steps to reproduce the same symptoms as below. echo 0 > /sys/bus/netdevsim/new_device dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/) ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \ spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \ offload crypto dev $dev dir out ethtool -K $dev esp-hw-offload off echo 0 > /sys/bus/netdevsim/del_device Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after xfrm_dev_state_add() acquired a reference to "struct net_device". Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit when acquiring a reference to "struct net_device". Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device") re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that commit for unknown reason chose to share xfrm_dev_down() between the NETDEV_DOWN event and the NETDEV_UNREGISTER event. I guess that that commit missed the behavior in the previous paragraph. Therefore, we need to re-introduce xfrm_dev_unregister() in order to release the reference to "struct net_device" by unconditionally flushing state and policy.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43168
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix reflink preserve cleanup issue commit c06c303832ec ("ocfs2: fix xattr array entry __counted_by error") doesn't handle all cases and the cleanup job for preserved xattr entries still has bug: - the 'last' pointer should be shifted by one unit after cleanup an array entry. - current code logic doesn't cleanup the first entry when xh_count is 1. Note, commit c06c303832ec is also a bug fix for 0fe9b66c65f3.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43169
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/buddy: Prevent BUG_ON by validating rounded allocation When DRM_BUDDY_CONTIGUOUS_ALLOCATION is set, the requested size is rounded up to the next power-of-two via roundup_pow_of_two(). Similarly, for non-contiguous allocations with large min_block_size, the size is aligned up via round_up(). Both operations can produce a rounded size that exceeds mm->size, which later triggers BUG_ON(order > mm->max_order). Example scenarios: - 9G CONTIGUOUS allocation on 10G VRAM memory: roundup_pow_of_two(9G) = 16G > 10G - 9G allocation with 8G min_block_size on 10G VRAM memory: round_up(9G, 8G) = 16G > 10G Fix this by checking the rounded size against mm->size. For non-contiguous or range allocations where size > mm->size is invalid, return -EINVAL immediately. For contiguous allocations without range restrictions, allow the request to fall through to the existing __alloc_contig_try_harder() fallback. This ensures invalid user input returns an error or uses the fallback path instead of hitting BUG_ON. v2: (Matt A) - Add Fixes, Cc stable, and Closes tags for context

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43170
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Move vbus draw to workqueue context Currently dwc3_gadget_vbus_draw() can be called from atomic context, which in turn invokes power-supply-core APIs. And some these PMIC APIs have operations that may sleep, leading to kernel panic. Fix this by moving the vbus_draw into a workqueue context.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43171
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't dump the entire memory region The current logic at cper_print_fw_err() doesn't check if the error record length is big enough to handle offset. On a bad firmware, if the ofset is above the actual record, length -= offset will underflow, making it dump the entire memory. The end result can be: - the logic taking a lot of time dumping large regions of memory; - data disclosure due to the memory dumps; - an OOPS, if it tries to dump an unmapped memory region. Fix it by checking if the section length is too small before doing a hex dump. [ rjw: Subject tweaks ]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43172
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix 22000 series SMEM parsing If the firmware were to report three LMACs (which doesn't exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is an overrun of the array. Reject such and use IWL_FW_CHECK instead of WARN_ON in this function.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43173
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: xscale: Check for PTP support properly In ixp4xx_get_ts_info() ixp46x_ptp_find() is called unconditionally despite this feature only existing on ixp46x, leading to the following splat from tcpdump: root@OpenWrt:~# tcpdump -vv -X -i eth0 (...) Unable to handle kernel NULL pointer dereference at virtual address 00000238 when read (...) Call trace: ptp_clock_index from ixp46x_ptp_find+0x1c/0x38 ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64 ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108 __ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648 __dev_ethtool from dev_ethtool+0x160/0x234 dev_ethtool from dev_ioctl+0x2cc/0x460 dev_ioctl from sock_ioctl+0x1ec/0x524 sock_ioctl from sys_ioctl+0x51c/0xa94 sys_ioctl from ret_fast_syscall+0x0/0x44 (...) Segmentation fault Check for ixp46x in ixp46x_ptp_find() before trying to set up PTP to avoid this. To avoid altering the returned error code from ixp4xx_hwtstamp_set() which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter the error code. The helper function ixp46x_ptp_find() helper returns -ENODEV.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43175
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841 The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure there are 8 slots for those newly registered clk_hw pointers, else there is going to be out of bounds write when pointers 4..7 are set into struct rs9_driver_data .clk_dif[4..7] field. Since there are other structure members past this struct clk_hw pointer array, writing to .clk_dif[4..7] fields corrupts both the struct rs9_driver_data content and data around it, sometimes without crashing the kernel. However, the kernel does surely crash when the driver is unbound or during suspend. Fix this, increase the struct clk_hw pointer array size to the maximum output count of 9FGV0841, which is the biggest chip that is supported by this driver.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43176
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate release report content before using for RTL8922DE The commit 957eda596c76 ("wifi: rtw89: pci: validate sequence number of TX release report") does validation on existing chips, which somehow a release report of SKB becomes malformed. As no clear cause found, add rules ahead for RTL8922DE to avoid crash if it happens.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43177
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: ipu6: Fix RPM reference leak in probe error paths Several error paths in ipu6_pci_probe() were jumping directly to out_ipu6_bus_del_devices without releasing the runtime PM reference. Add pm_runtime_put_sync() before cleaning up other resources.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43179
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: erofs: fix incorrect early exits for invalid metabox-enabled images Crafted EROFS images with metadata compression enabled can trigger incorrect early returns, leading to folio reference leaks. However, this does not cause system crashes or other severe issues.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43180
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43181
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gpio: sysfs: fix chip removal with GPIOs exported over sysfs Currently if we export a GPIO over sysfs and unbind the parent GPIO controller, the exported attribute will remain under /sys/class/gpio because once we remove the parent device, we can no longer associate the descriptor with it in gpiod_unexport() and never drop the final reference. Rework the teardown code: provide an unlocked variant of gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken before unregistering the parent device itself. This is done to prevent any new exports happening before we unregister the device completely.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43182
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: ccs: Avoid possible division by zero Calculating maximum M for scaler configuration involves dividing by MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably non-zero, the driver was missing the check it in fact was. Fix this.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43183
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix a resource leak in cx25821_dev_setup() Add release_mem_region() if ioremap() fails to release the memory region obtained by cx25821_get_resources().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43184
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: rnbd-srv: Zero the rsp buffer before using it Before using the data buffer to send back the response message, zero it completely. This prevents any stray bytes to be picked up by the client side when there the message is exchanged between different protocol versions.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N
References
CVE-2026-43185
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix signededness bug in smb_direct_prepare_negotiation() smb_direct_prepare_negotiation() casts an unsigned __u32 value from sp->max_recv_size and req->preferred_send_size to a signed int before computing min_t(int, ...). A maliciously provided preferred_send_size of 0x80000000 will return as smaller than max_recv_size, and then be used to set the maximum allowed alowed receive size for the next message. By sending a second message with a large value (>1420 bytes) the attacker can then achieve a heap buffer overflow. This fix replaces min_t(int, ...) with min_t(u32)

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43186
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00).

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43187
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43188
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ceph: do not propagate page array emplacement errors as batch errors When fscrypt is enabled, move_dirty_folio_in_page_array() may fail because it needs to allocate bounce buffers to store the encrypted versions of each folio. Each folio beyond the first allocates its bounce buffer with GFP_NOWAIT. Failures are common (and expected) under this allocation mode; they should flush (not abort) the batch. However, ceph_process_folio_batch() uses the same `rc` variable for its own return code and for capturing the return codes of its routine calls; failing to reset `rc` back to 0 results in the error being propagated out to the main writeback loop, which cannot actually tolerate any errors here: once `ceph_wbc.pages` is allocated, it must be passed to ceph_submit_write() to be freed. If it survives until the next iteration (e.g. due to the goto being followed), ceph_allocate_page_array()'s BUG_ON() will oops the worker. Note that this failure mode is currently masked due to another bug (addressed next in this series) that prevents multiple encrypted folios from being selected for the same write. For now, just reset `rc` when redirtying the folio to prevent errors in move_dirty_folio_in_page_array() from propagating. Note that move_dirty_folio_in_page_array() is careful never to return errors on the first folio, so there is no need to check for that. After this change, ceph_process_folio_batch() no longer returns errors; its only remaining failure indicator is `locked_pages == 0`, which the caller already handles correctly.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43189
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: Fix error handling on steps after finding a match Once an async connection is found to be matching with an fwnode, a sub-device may be registered (in case it wasn't already), its bound operation is called, ancillary links are created, the async connection is added to the sub-device's list of connections and removed from the global waiting connection list. Further on, the sub-device's possible own notifier is searched for possible additional matches. Fix these specific issues: - If v4l2_async_match_notify() failed before the sub-notifier handling, the async connection was unbound and its entry removed from the sub-device's async connection list. The latter part was also done in v4l2_async_match_notify(). - The async connection's sd field was only set after creating ancillary links in v4l2_async_match_notify(). It was however dereferenced in v4l2_async_unbind_subdev_one(), which was called on error path of v4l2_async_match_notify() failure.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43190
HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_tcpmss: check remaining length before reading optlen Quoting reporter: In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads op[i+1] directly without validating the remaining option length. If the last byte of the option field is not EOL/NOP (0/1), the code attempts to index op[i+1]. In the case where i + 1 == optlen, this causes an out-of-bounds read, accessing memory past the optlen boundary (either reading beyond the stack buffer _opt or the following payload).

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.2
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H
References
CVE-2026-43194
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok | ok ok ok \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link).

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43195
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate user queue size constraints Add validation to ensure user queue sizes meet hardware requirements: - Size must be a power of two for efficient ring buffer wrapping - Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations This prevents invalid configurations that could lead to GPU faults or unexpected behavior.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43196
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np) on the error path. However, after the devm_add_action_or_reset() returns, the of_node_put(clk_mux_np) is called again, causing a double free. Fix by returning directly, to avoid the duplicate of_node_put().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43197
CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: netconsole: avoid OOB reads, msg is not nul-terminated msg passed to netconsole from the console subsystem is not guaranteed to be nul-terminated. Before recent commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure") the message would be placed in printk_shared_pbufs, a static global buffer, so KASAN had harder time catching OOB accesses. Now we see: printk: console [netcon_ext0] enabled BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240 Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594 CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9 Call Trace: kasan_report+0xe4/0x120 string+0x1f7/0x240 vsnprintf+0x655/0xba0 scnprintf+0xba/0x120 netconsole_write+0x3fe/0xa10 nbcon_emit_next_record+0x46e/0x860 nbcon_kthread_func+0x623/0x750 Allocated by task 1: nbcon_alloc+0x1ea/0x450 register_console+0x26b/0xe10 init_netconsole+0xbb0/0xda0 The buggy address belongs to the object at ffff88813b6d4000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 0 bytes to the right of allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00)

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xCRITICAL 9.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43198
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: tcp: fix potential race in tcp_v6_syn_recv_sock() Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock() is done too late. After tcp_v4_syn_recv_sock(), the child socket is already visible from TCP ehash table and other cpus might use it. Since newinet->pinet6 is still pointing to the listener ipv6_pinfo bad things can happen as syzbot found. Move the problematic code in tcp_v6_mapped_child_init() and call this new helper from tcp_v4_syn_recv_sock() before the ehash insertion. This allows the removal of one tcp_sync_mss(), since tcp_v4_syn_recv_sock() will call it with the correct context.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43199
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by replacing mlx5_query_mac_address() with ether_addr_copy() to get the local MAC address directly from netdev->dev_addr. The issue occurs because mlx5_query_mac_address() queries the hardware which involves mlx5_cmd_exec() that can sleep, but it is called from the mlx5e_ipsec_handle_event workqueue which runs in atomic context. The MAC address is already available in netdev->dev_addr, so no need to query hardware. This avoids the sleeping call and resolves the bug. Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43200
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions struct configfs_item_operations callbacks are defined like the following: int (*allow_link)(struct config_item *src, struct config_item *target); void (*drop_link)(struct config_item *src, struct config_item *target); While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify the parameters in the correct order, pci_primary_epc_epf_unlink() and pci_secondary_epc_epf_unlink() specify the parameters in the wrong order, leading to the below kernel crash when using the unlink command in configfs: Unable to handle kernel paging request at virtual address 0000000300000857 Mem abort info: ... pc : string+0x54/0x14c lr : vsnprintf+0x280/0x6e8 ... string+0x54/0x14c vsnprintf+0x280/0x6e8 vprintk_default+0x38/0x4c vprintk+0xc4/0xe0 pci_epf_unbind+0xdc/0x108 configfs_unlink+0xe0/0x208+0x44/0x74 vfs_unlink+0x120/0x29c __arm64_sys_unlinkat+0x3c/0x90 invoke_syscall+0x48/0x134 do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0 [mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43201
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ARM processor Error: don't go past allocated memory If the BIOS generates a very small ARM Processor Error, or an incomplete one, the current logic will fail to deferrence err->section_length and ctx_info->size Add checks to avoid that. With such changes, such GHESv2 records won't cause OOPSes like this: [ 1.492129] Internal error: Oops: 0000000096000005 [#1] SMP [ 1.495449] Modules linked in: [ 1.495820] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.18.0-rc1-00017-gabadcc3553dd-dirty #18 PREEMPT [ 1.496125] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 [ 1.496433] Workqueue: kacpi_notify acpi_os_execute_deferred [ 1.496967] pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.497199] pc : log_arm_hw_error+0x5c/0x200 [ 1.497380] lr : ghes_handle_arm_hw_error+0x94/0x220 0xffff8000811c5324 is in log_arm_hw_error (../drivers/ras/ras.c:75). 70 err_info = (struct cper_arm_err_info *)(err + 1); 71 ctx_info = (struct cper_arm_ctx_info *)(err_info + err->err_info_num); 72 ctx_err = (u8 *)ctx_info; 73 74 for (n = 0; n < err->context_info_num; n++) { 75 sz = sizeof(struct cper_arm_ctx_info) + ctx_info->size; 76 ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + sz); 77 ctx_len += sz; 78 } 79 and similar ones while trying to access section_length on an error dump with too small size. [ rjw: Subject tweaks ]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43202
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: vt8500lcdfb: fix missing dma_free_coherent() fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43203
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: atm: fore200e: fix use-after-free in tasklets during device removal When the PCA-200E or SBA-200E adapter is being detached, the fore200e is deallocated. However, the tx_tasklet or rx_tasklet may still be running or pending, leading to use-after-free bug when the already freed fore200e is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet(). One of the race conditions can occur as follows: CPU 0 (cleanup) | CPU 1 (tasklet) fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | fore200e_tx_tasklet() | fore200e-> // UAF Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to synchronize with any pending or running tasklets. Moreover, since fore200e_reset() could prevent further interrupts or data transfers, the tasklet_kill() should be placed after fore200e_reset() to prevent the tasklet from being rescheduled in fore200e_interrupt(). Finally, it only needs to do tasklet_kill() when the fore200e state is greater than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized in earlier states. In a word, the tasklet_kill() should be placed in the FORE200E_STATE_IRQ branch within the switch...case structure. This bug was identified through static analysis.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H
References
CVE-2026-43205
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43206
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43207
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix error handling in probe function Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent resource leak. Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43208
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net: do not pass flow_id to set_rps_cpu() Blamed commit made the assumption that the RPS table for each receive queue would have the same size, and that it would not change. Compute flow_id in set_rps_cpu(), do not assume we can use the value computed by get_rps_cpu(). Otherwise we risk out-of-bound access and/or crashes.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43209
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: minix: Add required sanity checking to minix_check_superblock() The fs/minix implementation of the minix filesystem does not currently support any other value for s_log_zone_size than 0. This is also the only value supported in util-linux; see mkfs.minix.c line 511. In addition, this patch adds some sanity checking for the other minix superblock fields, and moves the minix_blocks_needed() checks for the zmap and imap also to minix_check_super_block(). This also closes a related syzbot bug report.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43210
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tracing: ring-buffer: Fix to check event length before using Check the event length before adding it for accessing next index in rb_read_data_buffer(). Since this function is used for validating possibly broken ring buffers, the length of the event could be broken. In that case, the new event (e + len) can point a wrong address. To avoid invalid memory access at boot, check whether the length of each event is in the possible range before using it.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43211
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix pci_slot_trylock() error handling Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()") delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in pci_slot_trylock(), but it forgets to remove the corresponding pci_dev_unlock() when pci_bus_trylock() fails. Before a4e772898f8b, the code did: if (!pci_dev_trylock(dev)) /* <- lock bridge device */ goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); /* <- unlock bridge device */ goto unlock; } } After a4e772898f8b the bridge-device lock is no longer taken, but the pci_dev_unlock(dev) on the failure path was left in place, leading to the bug. This yields one of two errors: 1. A warning that the lock is being unlocked when no one holds it. 2. An incorrect unlock of a lock that belongs to another thread. Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure path. [Same patch later posted by Keith at https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43212
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which is a valid index - so add a check for this.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43213
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate sequence number of TX release report Hardware rarely reports abnormal sequence number in TX release report, which will access out-of-bounds of wd_ring->pages array, causing NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U 6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1) Call Trace: rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)] rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)] net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759 handle_softirqs+0xbe/0x290 kernel/softirq.c:601 ? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)] __local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423 rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)] ? irq_thread+0xa7/0x340 kernel/irq/manage.c:0 irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314 ? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202 ? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220 kthread+0xea/0x110 kernel/kthread.c:376 ? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287 ? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 To prevent crash, validate rpp_info.seq before using.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43214
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2() Add SRCU read-side protection when reading PDPTR registers in __get_sregs2(). Reading PDPTRs may trigger access to guest memory: kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() -> kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot() kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(), which uses srcu_dereference_check() and requires either kvm->srcu or kvm->slots_lock to be held. Currently only vcpu->mutex is held, triggering lockdep warning: ============================= WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot 6.12.59+ #3 Not tainted include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.5.1717/15100: #0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824 __kvm_memslots include/linux/kvm_host.h:1062 [inline] __kvm_memslots include/linux/kvm_host.h:1059 [inline] kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline] kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617 kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302 load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065 svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688 kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline] __get_sregs2 arch/x86/kvm/x86.c:11784 [inline] kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279 kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43215
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix locking usage for tcon fields We used to use the cifs_tcp_ses_lock to protect a lot of objects that are not just the server, ses or tcon lists. We later introduced srv_lock, ses_lock and tc_lock to protect fields within the corresponding structs. This was done to provide a more granular protection and avoid unnecessary serialization. There were still a couple of uses of cifs_tcp_ses_lock to provide tcon fields. In this patch, I've replaced them with tc_lock.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
References
CVE-2026-43216
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: Drop the lock in skb_may_tx_timestamp() skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must not be taken in IRQ context, only softirq is okay. A few drivers receive the timestamp via a dedicated interrupt and complete the TX timestamp from that handler. This will lead to a deadlock if the lock is already write-locked on the same CPU. Taking the lock can be avoided. The socket (pointed by the skb) will remain valid until the skb is released. The ->sk_socket and ->file member will be set to NULL once the user closes the socket which may happen before the timestamp arrives. If we happen to observe the pointer while the socket is closing but before the pointer is set to NULL then we may use it because both pointer (and the file's cred member) are RCU freed. Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a matching WRITE_ONCE() where the pointer are cleared.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43217
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: iris: gen2: Add sanity check for session stop In iris_kill_session, inst->state is set to IRIS_INST_ERROR and session_close is executed, which will kfree(inst_hfi_gen2->packet). If stop_streaming is called afterward, it will cause a crash. Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet to firmware to fix that.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43218
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9903: Fix potential memory leak in tw9903_probe() In one of the error paths in tw9903_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43219
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly.

Published: 2026-05-06Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43221
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: initialise event handler read bytes IPMB doesn't use i2c reads, but the handler needs to set a value. Otherwise an i2c read will return an uninitialised value from the bus driver.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43222
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: AV1: Fix tile info buffer size Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43223
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43224
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix sgtable leak on mapping failures In an unlikely case when io_populate_area_dma() fails, which could only happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine, io_zcrx_map_area() will have an initialised and not freed table. It was supposed to be cleaned up in the error path, but !is_mapped prevents that.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43225
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix memory leak on failure path cfg80211_inform_bss_frame() may return NULL on failure. In that case, the allocated buffer 'buf' is not freed and the function returns early, leading to potential memory leak. Fix this by ensuring that 'buf' is freed on both success and failure paths.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43226
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/rds: No shortcut out of RDS_CONN_ERROR RDS connections carry a state "rds_conn_path::cp_state" and transitions from one state to another and are conditional upon an expected state: "rds_conn_path_transition." There is one exception to this conditionality, which is "RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop" regardless of what state the condition is currently in. But as soon as a connection enters state "RDS_CONN_ERROR", the connection handling code expects it to go through the shutdown-path. The RDS/TCP multipath changes added a shortcut out of "RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING" via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change"). A subsequent "rds_tcp_reset_callbacks" can then transition the state to "RDS_CONN_RESETTING" with a shutdown-worker queued. That'll trip up "rds_conn_init_shutdown", which was never adjusted to handle "RDS_CONN_RESETTING" and subsequently drops the connection with the dreaded "DR_INV_CONN_STATE", which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever. So we do two things here: a) Don't shortcut "RDS_CONN_ERROR", but take the longer path through the shutdown code. b) Add "RDS_CONN_RESETTING" to the expected states in "rds_conn_init_shutdown" so that we won't error out and get stuck, if we ever hit weird state transitions like this again."

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43227
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43229
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix device cleanup order to prevent kernel panic Move video device unregistration to the beginning of the remove function to ensure all video operations are stopped before cleaning up the worker thread and disabling PM runtime. This prevents hardware register access after the device has been powered down. In polling mode, the hrtimer periodically triggers wave5_vpu_timer_callback() which queues work to the kthread worker. The worker executes wave5_vpu_irq_work_fn() which reads hardware registers via wave5_vdi_read_register(). The original cleanup order disabled PM runtime and powered down hardware before unregistering video devices. When autosuspend triggers and powers off the hardware, the video devices are still registered and the worker thread can still be triggered by the hrtimer, causing it to attempt reading registers from powered-off hardware. This results in a bus error (synchronous external abort) and kernel panic. This causes random kernel panics during encoding operations: Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP Modules linked in: wave5 rpmsg_ctrl rpmsg_char ... CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread Tainted: G M W pc : wave5_vdi_read_register+0x10/0x38 [wave5] lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5] Call trace: wave5_vdi_read_register+0x10/0x38 [wave5] kthread_worker_fn+0xd8/0x238 kthread+0x104/0x120 ret_from_fork+0x10/0x20 Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: synchronous external abort: Fatal exception

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43230
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/rds: Clear reconnect pending bit When canceling the reconnect worker, care must be taken to reset the reconnect-pending bit. If the reconnect worker has not yet been scheduled before it is canceled, the reconnect-pending bit will stay on forever.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43231
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: radio-keene: fix memory leak in error path Fix a memory leak in usb_keene_probe(). The v4l2 control handler is initialized and controls are added, but if v4l2_device_register() or video_register_device() fails afterward, the handler was never freed, leaking memory. Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure the control handler is properly freed for all error paths after it is initialized.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43232
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets When the FarSync T-series card is being detached, the fst_card_info is deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task may still be running or pending, leading to use-after-free bugs when the already freed fst_card_info is accessed in fst_process_tx_work_q() or fst_process_int_work_q(). A typical race condition is depicted below: CPU 0 (cleanup) | CPU 1 (tasklet) | fst_start_xmit() fst_remove_one() | tasklet_schedule() unregister_hdlc_device()| | fst_process_tx_work_q() //handler kfree(card) //free | do_bottom_half_tx() | card-> //use The following KASAN trace was captured: ================================================================== BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00 Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32 ... Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcb/0x5d0 ? do_bottom_half_tx+0xb88/0xd00 kasan_report+0xb8/0xf0 ? do_bottom_half_tx+0xb88/0xd00 do_bottom_half_tx+0xb88/0xd00 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx___hrtimer_run_queues+0x10/0x10 fst_process_tx_work_q+0x67/0x90 tasklet_action_common+0x1fa/0x720 ? hrtimer_interrupt+0x31f/0x780 handle_softirqs+0x176/0x530 __irq_exit_rcu+0xab/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 41 on cpu 3 at 72.330843s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 __kasan_kmalloc+0x7f/0x90 fst_add_one+0x1a5/0x1cd0 local_pci_probe+0xdd/0x190 pci_device_probe+0x341/0x480 really_probe+0x1c6/0x6a0 __driver_probe_device+0x248/0x310 driver_probe_device+0x48/0x210 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x101/0x190 __device_attach+0x198/0x3a0 device_initial_probe+0x78/0xa0 pci_bus_add_device+0x81/0xc0 pci_bus_add_devices+0x7e/0x190 enable_slot+0x9b9/0x1130 acpiphp_check_bridge.part.0+0x2e1/0x460 acpiphp_hotplug_notify+0x36c/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... Freed by task 41 on cpu 1 at 75.138639s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x135/0x410 fst_remove_one+0x2ca/0x540 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0x364/0x530 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device+0xd/0x20 disable_slot+0x116/0x260 acpiphp_disable_and_eject_slot+0x4b/0x190 acpiphp_hotplug_notify+0x230/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... The buggy address belongs to the object at ffff88800aad1000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 28 bytes inside of freed 1024-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x100000000000040(head|node=0|zone=1) page_type: f5(slab) raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88800aad1000: fa fb ---truncated---

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
References
CVE-2026-43233
HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_choice() In decode_choice(), the boundary check before get_len() uses the variable `len`, which is still 0 from its initialization at the top of the function: unsigned int type, ext, len = 0; ... if (ext || (son->attr & OPEN)) { BYTE_ALIGN(bs); if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */ return H323_ERROR_BOUND; len = get_len(bs); /* OOB read */ When the bitstream is exactly consumed (bs->cur == bs->end), the check nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end), which is false. The subsequent get_len() call then dereferences *bs->cur++, reading 1 byte past the end of the buffer. If that byte has bit 7 set, get_len() reads a second byte as well. This can be triggered remotely by sending a crafted Q.931 SETUP message with a User-User Information Element containing exactly 2 bytes of PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with the nf_conntrack_h323 helper active. The decoder fully consumes the PER buffer before reaching this code path, resulting in a 1-2 byte heap-buffer-overflow read confirmed by AddressSanitizer. Fix this by checking for 2 bytes (the maximum that get_len() may read) instead of the uninitialized `len`. This matches the pattern used at every other get_len() call site in the same file, where the caller checks for 2 bytes of available data before calling get_len().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.2
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H
References
CVE-2026-43234
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: team: avoid NETDEV_CHANGEMTU event when unregistering slave syzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline] netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886 netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907 dev_set_mtu+0x126/0x260 net/core/dev_api.c:248 team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333 team_del_slave drivers/net/team/team_core.c:1936 [inline] team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2281 [inline] call_netdevice_notifiers net/core/dev.c:2295 [inline] __dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592 do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 problem. Ido Schimmel found steps to reproduce ip link add name team1 type team ip link add name dummy1 mtu 1499 master team1 type dummy ip netns add ns1 ip link set dev dummy1 netns ns1 ip -n ns1 link del dev dummy1 and also found that the same issue was fixed in the bond driver in commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when unregistering slave"). Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations") and commit 303a8487a657 ("net: s/__dev_set_mtu/__netif_set_mtu/") also applied.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43235
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: iris: Add missing platform data entries for SM8750 Two platform-data fields for SM8750 were missed: - get_vpu_buffer_size = iris_vpu33_buf_size Without this, the driver fails to allocate the required internal buffers, leading to basic decode/encode failures during session bring-up. - max_core_mbps = ((7680 * 4320) / 256) * 60 Without this capability exposed, capability checks are incomplete and v4l2-compliance for encoder fails.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43236
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying the atmel_hlcdc_plane state structure without properly duplicating the drm_plane_state. In particular, state->commit remained set to the old state commit, which can lead to a use-after-free in the next drm_atomic_commit() call. Fix this by calling __drm_atomic_helper_duplicate_plane_state(), which correctly clones the base drm_plane_state (including the ->commit pointer). It has been seen when closing and re-opening the device node while another DRM client (e.g. fbdev) is still attached: ============================================================================= BUG kmalloc-64 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- 0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0 pid=29 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_framebuffer_remove+0x4cc/0x5a8 drm_mode_rmfb_work_fn+0x6c/0x80 process_one_work+0x12c/0x2cc worker_thread+0x2a8/0x400 kthread+0xc0/0xdc ret_from_fork+0x14/0x28 Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0 pid=169 drm_atomic_helper_commit_hw_done+0x100/0x150 drm_atomic_helper_commit_tail+0x64/0x8c commit_tail+0x168/0x18c drm_atomic_helper_commit+0x138/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54 Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0 flags=0x200(workingset|zone=0) Object 0xc611b340 @offset=832 fp=0xc611b7c0

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43237
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Refactor amdgpu_gem_va_ioctl for Handling Last Fence Update and Timeline Management v4 This commit simplifies the amdgpu_gem_va_ioctl function, key updates include: - Moved the logic for managing the last update fence directly into amdgpu_gem_va_update_vm. - Introduced checks for the timeline point to enable conditional replacement or addition of fences. v2: Addressed review comments from Christian. v3: Updated comments (Christian). v4: The previous version selected the fence too early and did not manage its reference correctly, which could lead to stale or freed fences being used. This resulted in refcount underflows and could crash when updating GPU timelines. The fence is now chosen only after the VA mapping work is completed, and its reference is taken safely. After exporting it to the VM timeline syncobj, the driver always drops its local fence reference, ensuring balanced refcounting and avoiding use-after-free on dma_fence. Crash signature: [ 205.828135] refcount_t: underflow; use-after-free. [ 205.832963] WARNING: CPU: 30 PID: 7274 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 ... [ 206.074014] Call Trace: [ 206.076488] [ 206.078608] amdgpu_gem_va_ioctl+0x6ea/0x740 [amdgpu] [ 206.084040] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu] [ 206.089994] drm_ioctl_kernel+0x86/0xe0 [drm] [ 206.094415] drm_ioctl+0x26e/0x520 [drm] [ 206.098424] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu] [ 206.104402] amdgpu_drm_ioctl+0x4b/0x80 [amdgpu] [ 206.109387] __x64_sys_ioctl+0x96/0xe0 [ 206.113156] do_syscall_64+0x66/0x2d0 ... [ 206.553351] BUG: unable to handle page fault for address: ffffffffc0dfde90 ... [ 206.553378] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0 ... [ 206.553405] Call Trace: [ 206.553409] [ 206.553415] ? __pfx_drm_sched_fence_free_rcu+0x10/0x10 [gpu_sched] [ 206.553424] dma_fence_signal+0x30/0x60 [ 206.553427] drm_sched_job_done.isra.0+0x123/0x150 [gpu_sched] [ 206.553434] dma_fence_signal_timestamp_locked+0x6e/0xe0 [ 206.553437] dma_fence_signal+0x30/0x60 [ 206.553441] amdgpu_fence_process+0xd8/0x150 [amdgpu] [ 206.553854] sdma_v4_0_process_trap_irq+0x97/0xb0 [amdgpu] [ 206.554353] edac_mce_amd(E) ee1004(E) [ 206.554270] amdgpu_irq_dispatch+0x150/0x230 [amdgpu] [ 206.554702] amdgpu_ih_process+0x6a/0x180 [amdgpu] [ 206.555101] amdgpu_irq_handler+0x23/0x60 [amdgpu] [ 206.555500] __handle_irq_event_percpu+0x4a/0x1c0 [ 206.555506] handle_irq_event+0x38/0x80 [ 206.555509] handle_edge_irq+0x92/0x1e0 [ 206.555513] __common_interrupt+0x3e/0xb0 [ 206.555519] common_interrupt+0x80/0xa0 [ 206.555525] [ 206.555527] ... [ 206.555650] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0 ... [ 206.555667] Kernel panic - not syncing: Fatal exception in interrupt

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43238
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbedit: fix divide-by-zero in tcf_skbedit_hash() Commit 38a6f0865796 ("net: sched: support hash selecting tx queue") added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is computed as: mapping_mod = queue_mapping_max - queue_mapping + 1; The range size can be 65536 when the requested range covers all possible u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX). That value cannot be represented in a u16 and previously wrapped to 0, so tcf_skbedit_hash() could trigger a divide-by-zero: queue_mapping += skb_get_hash(skb) % params->mapping_mod; Compute mapping_mod in a wider type and reject ranges larger than U16_MAX to prevent params->mapping_mod from becoming 0 and avoid the crash.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43239
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: smb: client: prevent races in ->query_interfaces() It was possible for two query interface works to be concurrently trying to update the interfaces. Prevent this by checking and updating iface_last_update under iface_lock.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
References
CVE-2026-43240
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: add a sanity check on previous kernel's ima kexec buffer When the second-stage kernel is booted via kexec with a limiting command line such as "mem=", the physical range that contains the carried over IMA measurement list may fall outside the truncated RAM leading to a kernel panic. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) – not-present page Other architectures already validate the range with page_is_ram(), as done in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") do a similar check on x86. Without carrying the measurement list across kexec, the attestation would fail.

Published: 2026-05-06Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43241
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43242
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: soc: ti: k3-socinfo: Fix regmap leak on probe failure The mmio regmap allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43243
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src Trying to access link enc on a dpia link will cause a crash otherwise

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43244
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43245
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: ntfs: ->d_compare() must not block ... so don't use __getname() there. Switch it (and ntfs_d_hash(), while we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash() almost certainly can do with smaller allocations, but let ntfs folks deal with that - keep the allocation size as-is for now. Stop abusing names_cachep in ntfs, period - various uses of that thing in there have nothing to do with pathnames; just use k[mz]alloc() and be done with that. For now let's keep sizes as-in, but AFAICS none of the users actually want PATH_MAX.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43246
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9906: Fix potential memory leak in tw9906_probe() In one of the error paths in tw9906_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43247
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix SError of kernel panic when closed SError of kernel panic rarely happened while testing fluster. The root cause was to enter suspend mode because timeout of autosuspend delay happened. [ 48.834439] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError [ 48.834455] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7 [ 48.834461] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025 [ 48.834464] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 48.834468] pc : wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834488] lr : wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834495] sp : ffff8000856e3a30 [ 48.834497] x29: ffff8000856e3a30 x28: ffff0008093f6010 x27: ffff000809158130 [ 48.834504] x26: 0000000000000000 x25: ffff00080b625000 x24: ffff000804a9ba80 [ 48.834509] x23: ffff000802343028 x22: ffff000809158150 x21: ffff000802218000 [ 48.834513] x20: ffff0008093f6000 x19: ffff0008093f6000 x18: 0000000000000000 [ 48.834518] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff74009618 [ 48.834523] x14: 000000010000000c x13: 0000000000000000 x12: 0000000000000000 [ 48.834527] x11: ffffffffffffffff x10: ffffffffffffffff x9 : ffff000802343028 [ 48.834532] x8 : ffff00080b6252a0 x7 : 0000000000000038 x6 : 0000000000000000 [ 48.834536] x5 : ffff00080b625060 x4 : 0000000000000000 x3 : 0000000000000000 [ 48.834541] x2 : 0000000000000000 x1 : ffff800084bf0118 x0 : ffff800084bf0000 [ 48.834547] Kernel panic - not syncing: Asynchronous SError Interrupt [ 48.834549] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7 [ 48.834554] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025 [ 48.834556] Call trace: [ 48.834559] dump_backtrace+0x94/0xec [ 48.834574] show_stack+0x18/0x24 [ 48.834579] dump_stack_lvl+0x38/0x90 [ 48.834585] dump_stack+0x18/0x24 [ 48.834588] panic+0x35c/0x3e0 [ 48.834592] nmi_panic+0x40/0x8c [ 48.834595] arm64_serror_panic+0x64/0x70 [ 48.834598] do_serror+0x3c/0x78 [ 48.834601] el1h_64_error_handler+0x34/0x4c [ 48.834605] el1h_64_error+0x64/0x68 [ 48.834608] wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834615] wave5_vpu_dec_clr_disp_flag+0x54/0x80 [wave5] [ 48.834622] wave5_vpu_dec_buf_queue+0x19c/0x1a0 [wave5] [ 48.834628] __enqueue_in_driver+0x3c/0x74 [videobuf2_common] [ 48.834639] vb2_core_qbuf+0x508/0x61c [videobuf2_common] [ 48.834646] vb2_qbuf+0xa4/0x168 [videobuf2_v4l2] [ 48.834656] v4l2_m2m_qbuf+0x80/0x238 [v4l2_mem2mem] [ 48.834666] v4l2_m2m_ioctl_qbuf+0x18/0x24 [v4l2_mem2mem] [ 48.834673] v4l_qbuf+0x48/0x5c [videodev] [ 48.834704] __video_do_ioctl+0x180/0x3f0 [videodev] [ 48.834725] video_usercopy+0x2ec/0x68c [videodev] [ 48.834745] video_ioctl2+0x18/0x24 [videodev] [ 48.834766] v4l2_ioctl+0x40/0x60 [videodev] [ 48.834786] __arm64_sys_ioctl+0xa8/0xec [ 48.834793] invoke_syscall+0x44/0x100 [ 48.834800] el0_svc_common.constprop.0+0xc0/0xe0 [ 48.834804] do_el0_svc+0x1c/0x28 [ 48.834809] el0_svc+0x30/0xd0 [ 48.834813] el0t_64_sync_handler+0xc0/0xc4 [ 48.834816] el0t_64_sync+0x190/0x194 [ 48.834820] SMP: stopping secondary CPUs [ 48.834831] Kernel Offset: disabled [ 48.834833] CPU features: 0x08,00002002,80200000,4200421b [ 48.834837] Memory Limit: none [ 49.161404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43248
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: vhost: move vdpa group bound check to vhost_vdpa Remove duplication by consolidating these here. This reduces the posibility of a parent driver missing them. While we're at it, fix a bug in vdpa_sim where a valid ASID can be assigned to a group equal to ngroups, causing an out of bound write.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43249
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: 9p/xen: protect xen_9pfs_front_free against concurrent calls The xenwatch thread can race with other back-end change notifications and call xen_9pfs_front_free() twice, hitting the observed general protection fault due to a double-free. Guard the teardown path so only one caller can release the front-end state at a time, preventing the crash. This is a fix for the following double-free: [ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none) [ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150 [ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42 [ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246 [ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000 [ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000 [ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000 [ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68 [ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040 [ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000 [ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660 [ 27.052418] Call Trace: [ 27.052420] [ 27.052422] xen_9pfs_front_changed+0x5d5/0x720 [ 27.052426] ? xenbus_otherend_changed+0x72/0x140 [ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10 [ 27.052434] xenwatch_thread+0x94/0x1c0 [ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10 [ 27.052442] kthread+0xf8/0x240 [ 27.052445] ? __pfx_kthread+0x10/0x10 [ 27.052449] ? __pfx_kthread+0x10/0x10 [ 27.052452] ret_from_fork+0x16b/0x1a0 [ 27.052456] ? __pfx_kthread+0x10/0x10 [ 27.052459] ret_from_fork_asm+0x1a/0x30 [ 27.052463] [ 27.052465] Modules linked in: [ 27.052471] ---[ end trace 0000000000000000 ]---

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43250
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with status -ESHUTDOWN but still has active DMA state. If the gadget driver reuses this request on reconnect without reinitializing it, the stale DMA state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero num_mapped_sgs) and attempt to use freed/invalid DMA addresses, leading to alignment errors and potential memory corruption. The normal completion path via _hardware_dequeue() properly calls usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before returning the request. The _ep_nuke() path must do the same cleanup to ensure requests are returned in a clean, reusable state. Fix: Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror the cleanup sequence in _hardware_dequeue(): - Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set - Call sglist_do_debounce() with copy=false if bounce buffer exists This ensures that when requests are returned due to endpoint shutdown, they don't retain stale DMA mappings. The 'false' parameter to sglist_do_debounce() prevents copying data back (appropriate for shutdown path where transfer was aborted).

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43251
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: prodikeys: Check presence of pm->input_ep82 Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, pm->input_ep82 stays NULL, which leads to a crash later. This does not happen with the real device, but can be provoked by imposing as one.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43252
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always set ID as avail when rm endp Syzkaller managed to find a combination of actions that was generating this warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000 ---truncated---

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43253
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: move wait_on_sem() out of spinlock With iommu.strict=1, the existing completion wait path can cause soft lockups under stressed environment, as wait_on_sem() busy-waits under the spinlock with interrupts disabled. Move the completion wait in iommu_completion_wait() out of the spinlock. wait_on_sem() only polls the hardware-updated cmd_sem and does not require iommu->lock, so holding the lock during the busy wait unnecessarily increases contention and extends the time with interrupts disabled.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43254
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - fix packet extraction from stream When processing TCP stream data in ovpn_tcp_recv, we receive large cloned skbs from __strp_rcv that may contain multiple coalesced packets. The current implementation has two bugs: 1. Header offset overflow: Using pskb_pull with large offsets on coalesced skbs causes skb->data - skb->head to exceed the u16 storage of skb->network_header. This causes skb_reset_network_header to fail on the inner decapsulated packet, resulting in packet drops. 2. Unaligned protocol headers: Extracting packets from arbitrary positions within the coalesced TCP stream provides no alignment guarantees for the packet data causing performance penalties on architectures without efficient unaligned access. Additionally, openvpn's 2-byte length prefix on TCP packets causes the subsequent 4-byte opcode and packet ID fields to be inherently misaligned. Fix both issues by allocating a new skb for each openvpn packet and using skb_copy_bits to extract only the packet content into the new buffer, skipping the 2-byte length prefix. Also, check the length before invoking the function that performs the allocation to avoid creating an invalid skb. If the packet has to be forwarded to userspace the 2-byte prefix can be pushed to the head safely, without misalignment. As a side effect, this approach also avoids the expensive linearization that pskb_pull triggers on cloned skbs with page fragments. In testing, this resulted in TCP throughput improvements of up to 74%.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43255
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix WARNING in usb_tx_block The function usb_tx_block() submits cardp->tx_urb without ensuring that any previous transmission on this URB has completed. If a second call occurs while the URB is still active (e.g. during rapid firmware loading), usb_submit_urb() detects the active state and triggers a warning: 'URB submitted while active'. Fix this by enforcing serialization: call usb_kill_urb() before submitting the new request. This ensures the URB is idle and safe to reuse.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43256
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update() vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop bound and passes the index to vfe_isr_reg_update(). However, vfe->line[] array is defined with VFE_LINE_NUM_MAX(4): struct vfe_line line[VFE_LINE_NUM_MAX]; When index is 4, 5, 6, the access to vfe->line[line_id] exceeds the array bounds and resulting in out-of-bounds memory access. Fix this by using separate loops for output lines and write masters.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43257
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: cx88: Add missing unmap in snd_cx88_hw_params() In error path, add cx88_alsa_dma_unmap() to release resource acquired by cx88_alsa_dma_map().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43258
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: alpha: fix user-space corruption during memory compaction Alpha systems can suffer sporadic user-space crashes and heap corruption when memory compaction is enabled. Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned tcache chunk"), and compiler internal errors. The failures disappear when compaction is disabled or when using global TLB invalidation. The root cause is insufficient TLB shootdown during page migration. Alpha relies on ASN-based MM context rollover for instruction cache coherency, but this alone is not sufficient to prevent stale data or instruction translations from surviving migration. Fix this by introducing a migration-specific helper that combines: - MM context invalidation (ASN rollover), - immediate per-CPU TLB invalidation (TBI), - synchronous cross-CPU shootdown when required. The helper is used only by migration/compaction paths to avoid changing global TLB semantics. Additionally, update flush_tlb_other(), pte_clear(), to use READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering. This fixes observed crashes on both UP and SMP Alpha systems.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43259
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: set platform driver data Add missing platform_set_drvdata() as the data will be used in remove().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43260
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RSS context delete logic We need to free the corresponding RSS context VNIC in FW everytime an RSS context is deleted in driver. Commit 667ac333dbb7 added a check to delete the VNIC in FW only when netif_running() is true to help delete RSS contexts with interface down. Having that condition will make the driver leak VNICs in FW whenever close() happens with active RSS contexts. On the subsequent open(), as part of RSS context restoration, we will end up trying to create extra VNICs for which we did not make any reservation. FW can fail this request, thereby making us lose active RSS contexts. Suppose an RSS context is deleted already and we try to process a delete request again, then the HWRM functions will check for validity of the request and they simply return if the resource is already freed. So, even for delete-when-down cases, netif_running() check is not necessary. Remove the netif_running() condition check when deleting an RSS context.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43261
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: arm64: Add support for TSV110 Spectre-BHB mitigation The TSV110 processor is vulnerable to the Spectre-BHB (Branch History Buffer) attack, which can be exploited to leak information through branch prediction side channels. This commit adds the MIDR of TSV110 to the list for software mitigation.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43262
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43263
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix Null reference while testing fluster When multi instances are created/destroyed, many interrupts happens and structures for decoder are removed. "struct vpu_instance" this structure is shared for all flow in the decoder, so if the structure is not protected by lock, Null dereference could happens sometimes. IRQ Handler was spilt to two phases and Lock was added as well.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43264
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: of: display_timing: fix refcount leak in of_get_display_timings() of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43265
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block() Ignore -EBUSY when checking nested events after exiting a blocking state while L2 is active, as exiting to userspace will generate a spurious userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's demise. Continuing with the wakeup isn't perfect either, as *something* has gone sideways if a vCPU is awakened in L2 with an injected event (or worse, a nested run pending), but continuing on gives the VM a decent chance of surviving without any major side effects. As explained in the Fixes commits, it _should_ be impossible for a vCPU to be put into a blocking state with an already-injected event (exception, IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected events, and thus put the vCPU into what should be an impossible state. Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be violating x86 architecture, e.g. by WARNing if KVM attempts to inject an exception or interrupt while the vCPU isn't running.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43266
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 [ rjw: Subject and changelog tweaks ]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43267
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential zero beacon interval in beacon tracking During fuzz testing, it was discovered that bss_conf->beacon_int might be zero, which could result in a division by zero error in subsequent calculations. Set a default value of 100 TU if the interval is zero to ensure stability.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43268
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hfsplus: pretend special inodes as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43269
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback After several commits, the slab memory increases. Some drm_crtc_commit objects are not freed. The atomic_destroy_state callback only put the framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function to put all the objects that are no longer needed. It has been seen after hours of usage of a graphics application or using kmemleak: unreferenced object 0xc63a6580 (size 64): comm "egt_basic", pid 171, jiffies 4294940784 hex dump (first 32 bytes): 40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:. 8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:. backtrace (crc c25aa925): kmemleak_alloc+0x34/0x3c __kmalloc_cache_noprof+0x150/0x1a4 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43270
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove() In mtk_mdp_probe(), vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43271
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md-cluster: fix NULL pointer dereference in process_metadata_update The function process_metadata_update() blindly dereferences the 'thread' pointer (acquired via rcu_dereference_protected) within the wait_event() macro. While the code comment states "daemon thread must exist", there is a valid race condition window during the MD array startup sequence (md_run): 1. bitmap_load() is called, which invokes md_cluster_ops->join(). 2. join() starts the "cluster_recv" thread (recv_daemon). 3. At this point, recv_daemon is active and processing messages. 4. However, mddev->thread (the main MD thread) is not initialized until later in md_run(). If a METADATA_UPDATED message is received from a remote node during this specific window, process_metadata_update() will be called while mddev->thread is still NULL, leading to a kernel panic. To fix this, we must validate the 'thread' pointer. If it is NULL, we release the held lock (no_new_dev_lockres) and return early, safely ignoring the update request as the array is not yet fully ready to process it.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43272
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix possible dereference of uninitialized pointer There is a pointer head_page in rb_meta_validate_events() which is not initialized at the beginning of a function. This pointer can be dereferenced if there is a failure during reader page validation. In this case the control is passed to "invalid" label where the pointer is dereferenced in a loop. To fix the issue initialize orig_head and head_page before calling rb_validate_buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43273
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ceph: supply snapshot context in ceph_zero_partial_object() The ceph_zero_partial_object function was missing proper snapshot context for its OSD write operations, which could lead to data inconsistencies in snapshots. Reproducer: ../src/vstart.sh --new -x --localhost --bluestore ./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a' mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1 mkdir /mnt/mycephfs/.snap/snap1 md5sum /mnt/mycephfs/.snap/snap1/foo fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo echo 3 > /proc/sys/vm/drop/caches md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!!

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43274
HIGH8.4

In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: fix out-of-bounds access in mchp_ipc_get_cluster_aggr_irq() The cluster_cfg array is dynamically allocated to hold per-CPU configuration structures, with its size based on the number of online CPUs. Previously, this array was indexed using hartid, which may be non-contiguous or exceed the bounds of the array, leading to out-of-bounds access. Switch to using cpuid as the index, as it is guaranteed to be within the valid range provided by for_each_online_cpu().

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43275
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Flush exception handling work when RPM level is zero Ensure that the exception event handling work is explicitly flushed during suspend when the runtime power management level is set to UFS_PM_LVL_0. When the RPM level is zero, the device power mode and link state both remain active. Previously, the UFS core driver bypassed flushing exception event handling jobs in this configuration. This created a race condition where the driver could attempt to access the host controller to handle an exception after the system had already entered a deep power-down state, resulting in a system crash. Explicitly flush this work and disable auto BKOPs before the suspend callback proceeds. This guarantees that pending exception tasks complete and prevents illegal hardware access during the power-down sequence.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43276
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix double destroy_workqueue on service rescan PCI path While testing corner cases in the driver, a use-after-free crash was found on the service rescan PCI path. When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup() destroys gc->service_wq. If the subsequent mana_gd_resume() fails with -ETIMEDOUT or -EPROTO, the code falls through to mana_serv_rescan() which triggers pci_stop_and_remove_bus_device(). This invokes the PCI .remove callback (mana_gd_remove), which calls mana_gd_cleanup() a second time, attempting to destroy the already- freed workqueue. Fix this by NULL-checking gc->service_wq in mana_gd_cleanup() and setting it to NULL after destruction. Call stack of issue for reference: [Sat Feb 21 18:53:48 2026] Call Trace: [Sat Feb 21 18:53:48 2026] [Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana] [Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana] [Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0 [Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70 [Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250 [Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20 [Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90 [Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30 [Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana] [Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana] [Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0 [Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0 [Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130 [Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30 [Sat Feb 21 18:53:48 2026]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43277
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ensure that won't go past CPER allocated record The logic at ghes_new() prevents allocating too large records, by checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB). Yet, the allocation is done with the actual number of pages from the CPER bios table location, which can be smaller. Yet, a bad firmware could send data with a different size, which might be bigger than the allocated memory, causing an OOPS: Unable to handle kernel paging request at virtual address fff00000f9b40000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000 [fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 Workqueue: kacpi_notify acpi_os_execute_deferred pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : hex_dump_to_buffer+0x30c/0x4a0 lr : hex_dump_to_buffer+0x328/0x4a0 sp : ffff800080e13880 x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083 x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004 x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083 x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010 x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020 x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008 x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020 x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000 x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008 Call trace: hex_dump_to_buffer+0x30c/0x4a0 (P) print_hex_dump+0xac/0x170 cper_estatus_print_section+0x90c/0x968 cper_estatus_print+0xf0/0x158 __ghes_print_estatus+0xa0/0x148 ghes_proc+0x1bc/0x220 ghes_notify_hed+0x5c/0xb8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x80 acpi_hed_notify+0x28/0x40 acpi_ev_notify_dispatch+0x50/0x80 acpi_os_execute_deferred+0x24/0x48 process_one_work+0x15c/0x3b0 worker_thread+0x2d0/0x400 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44) ---[ end trace 0000000000000000 ]--- Prevent that by taking the actual allocated are into account when checking for CPER length. [ rjw: Subject tweaks ]

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43278
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: dm: clear cloned request bio pointer when last clone bio completes Stale rq->bio values have been observed to cause double-initialization of cloned bios in request-based device-mapper targets, leading to use-after-free and double-free scenarios. One such case occurs when using dm-multipath on top of a PCIe NVMe namespace, where cloned request bios are freed during blk_complete_request(), but rq->bio is left intact. Subsequent clone teardown then attempts to free the same bios again via blk_rq_unprep_clone(). The resulting double-free path looks like: nvme_pci_complete_batch() nvme_complete_batch() blk_mq_end_request_batch() blk_complete_request() // called on a DM clone request bio_endio() // first free of all clone bios ... rq->end_io() // end_clone_request() dm_complete_request(tio->orig) dm_softirq_done() dm_done() dm_end_request() blk_rq_unprep_clone() // second free of clone bios Fix this by clearing the clone request's bio pointer when the last cloned bio completes, ensuring that later teardown paths do not attempt to free already-released bios.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43279
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Add sanity check for OOB writes at silencing At silencing the playback URB packets in the implicit fb mode before the actual playback, we blindly assume that the received packets fit with the buffer size. But when the setup in the capture stream differs from the playback stream (e.g. due to the USB core limitation of max packet size), such an inconsistency may lead to OOB writes to the buffer, resulting in a crash. For addressing it, add a sanity check of the transfer buffer size at prepare_silent_urb(), and stop the data copy if the received data overflows. Also, report back the transfer error properly from there, too. Note that this doesn't fix the root cause of the playback error itself, but this merely covers the kernel Oops.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43280
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise When user provides a bogus pat_index value through the madvise IOCTL, the xe_pat_index_get_coh_mode() function performs an array access without validating bounds. This allows a malicious user to trigger an out-of-bounds kernel read from the xe->pat.table array. The vulnerability exists because the validation in madvise_args_are_sane() directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without first checking if pat_index is within [0, xe->pat.n_entries). Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug builds, it still performs the unsafe array access in production kernels. v2(Matthew Auld) - Using array_index_nospec() to mitigate spectre attacks when the value is used v3(Matthew Auld) - Put the declarations at the start of the block (cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29)

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43281
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate() Although it is guided that `#mbox-cells` must be at least 1, there are many instances of `#mbox-cells = <0>;` in the device tree. If that is the case and the corresponding mailbox controller does not provide `fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will be used by default and out-of-bounds accesses could occur due to lack of bounds check in that function.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43282
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: Fix potential NULL pointer dereference in ionic_query_port The function ionic_query_port() calls ib_device_get_netdev() without checking the return value which could lead to NULL pointer dereference, Fix it by checking the return value and return -ENODEV if the 'ndev' is NULL.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43283
HIGH8.8

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ec_bhf: Fix dma_free_coherent() dma handle dma_free_coherent() in error path takes priv->rx_buf.alloc_len as the dma handle. This would lead to improper unmapping of the buffer. Change the dma handle to priv->rx_buf.alloc_phys.

Published: 2026-05-06Modified: 2026-06-17
CVSS 3.xHIGH 8.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
References
CVE-2026-43285
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not access current->mems_allowed_seq if !allow_spin Lockdep complains when get_from_any_partial() is called in an NMI context, because current->mems_allowed_seq is seqcount_spinlock_t and not NMI-safe: ================================ WARNING: inconsistent lock state 6.19.0-rc5-kfree-rcu+ #315 Tainted: G N -------------------------------- inconsistent {INITIAL USE} -> {IN-NMI} usage. kunit_try_catch/9989 [HC1[1]:SC0[0]:HE0:SE1] takes: ffff889085799820 (&____s->seqcount#3){.-.-}-{0:0}, at: ___slab_alloc+0x58f/0xc00 {INITIAL USE} state was registered at: lock_acquire+0x185/0x320 kernel_init_freeable+0x391/0x1150 kernel_init+0x1f/0x220 ret_from_fork+0x736/0x8f0 ret_from_fork_asm+0x1a/0x30 irq event stamp: 56 hardirqs last enabled at (55): [] _raw_spin_unlock_irq+0x27/0x70 hardirqs last disabled at (56): [] __schedule+0x2a8a/0x6630 softirqs last enabled at (0): [] copy_process+0x1dc1/0x6a10 softirqs last disabled at (0): [<0000000000000000>] 0x0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&____s->seqcount#3); lock(&____s->seqcount#3); *** DEADLOCK *** According to Documentation/locking/seqlock.rst, seqcount_t is not NMI-safe and seqcount_latch_t should be used when read path can interrupt the write-side critical section. In this case, do not access current->mems_allowed_seq and avoid retry.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43286
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: restore failed global reservations to subpool Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool") fixed an underflow error for hstate->resv_huge_pages caused by incorrectly attributing globally requested pages to the subpool's reservation. Unfortunately, this fix also introduced the opposite problem, which would leave spool->used_hpages elevated if the globally requested pages could not be acquired. This is because while a subpool's reserve pages only accounts for what is requested and allocated from the subpool, its "used" counter keeps track of what is consumed in total, both from the subpool and globally. Thus, we need to adjust spool->used_hpages in the other direction, and make sure that globally requested pages are uncharged from the subpool's used counter. Each failed allocation attempt increments the used_hpages counter by how many pages were requested from the global pool. Ultimately, this renders the subpool unusable, as used_hpages approaches the max limit. The issue can be reproduced as follows: 1. Allocate 4 hugetlb pages 2. Create a hugetlb mount with max=4, min=2 3. Consume 2 pages globally 4. Request 3 pages from the subpool (2 from subpool + 1 from global) 4.1 hugepage_subpool_get_pages(spool, 3) succeeds. used_hpages += 3 4.2 hugetlb_acct_memory(h, 1) fails: no global pages left used_hpages -= 2 5. Subpool now has used_hpages = 1, despite not being able to successfully allocate any hugepages. It believes it can now only allocate 3 more hugepages, not 4. With each failed allocation attempt incrementing the used counter, the subpool eventually reaches a point where its used counter equals its max counter. At that point, any future allocations that try to allocate hugeTLB pages from the subpool will fail, despite the subpool not having any of its hugeTLB pages consumed by any user. Once this happens, there is no way to make the subpool usable again, since there is no way to decrement the used counter as no process is really consuming the hugeTLB pages. The underflow issue that the original commit fixes still remains fixed as well. Without this fix, used_hpages would keep on leaking if hugetlb_acct_memory() fails.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43287
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm: Account property blob allocations to memcg DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kernel memory growth without introducing additional policy or per-file limits.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43288
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W 6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none) RIP: 0010:percpu_counter_add_batch+0x13/0xa0 Call Trace: ext4_mark_group_bitmap_corrupted+0xcb/0xe0 ext4_validate_block_bitmap+0x2a1/0x2f0 ext4_read_block_bitmap+0x33/0x50 mb_group_bb_bitmap_alloc+0x33/0x80 ext4_mb_add_groupinfo+0x190/0x250 ext4_mb_init_backend+0x87/0x290 ext4_mb_init+0x456/0x640 __ext4_fill_super+0x1072/0x1680 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4f6/0x6b0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== This issue can be reproduced using the following commands: mkfs.ext4 -F -q -b 1024 /dev/sda 5G tune2fs -O quota,project /dev/sda mount /dev/sda /tmp/test With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads and validates the block bitmap. When the validation fails, ext4_mark_group_bitmap_corrupted() attempts to update sbi->s_freeclusters_counter. However, this percpu_counter has not been initialized yet at this point, which leads to the panic described above. Fix this by moving the execution of ext4_percpu_param_init() to occur before ext4_mb_init(), ensuring the per-CPU counters are initialized before they are used.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43289
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: kexec: derive purgatory entry from symbol kexec_load_purgatory() derives image->start by locating e_entry inside an SHF_EXECINSTR section. If the purgatory object contains multiple executable sections with overlapping sh_addr, the entrypoint check can match more than once and trigger a WARN. Derive the entry section from the purgatory_start symbol when present and compute image->start from its final placement. Keep the existing e_entry fallback for purgatories that do not expose the symbol. WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784 Call Trace: bzImage64_load+0x133/0xa00 __do_sys_kexec_file_load+0x2b3/0x5c0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e [me@linux.beauty: move helper to avoid forward declaration, per Baoquan]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43290
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Return queued buffers on start_streaming() failure Return buffers if streaming fails to start due to uvc_pm_get() error. This bug may be responsible for a warning I got running while :; do yavta -c3 /dev/video0; done on an xHCI controller which failed under this workload. I had no luck reproducing this warning again to confirm. xhci_hcd 0000:09:00.0: HC died; cleaning up usb 13-2: USB disconnect, device number 2 WARNING: CPU: 2 PID: 29386 at drivers/media/common/videobuf2/videobuf2-core.c:1803 vb2_start_streaming+0xac/0x120

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43291
HIGH8.3

In the Linux kernel, the following vulnerability has been resolved: net: nfc: nci: Fix parameter validation for packet data Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct).

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 8.3
CVSS:3.x/CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:H
References
CVE-2026-43292
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during vmalloc cleanup triggers expensive stack unwinding that acquires RCU read locks. Processing a large purge_list without rescheduling can cause the task to hold CPU for extended periods (10+ seconds), leading to RCU stalls and potential OOM conditions. The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node() where iterating through hundreds or thousands of vmap_area entries and freeing their associated shadow pages causes: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l ... task:kworker/0:17 state:R running task stack:28840 pid:6229 ... kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299 purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299 Each call to kasan_release_vmalloc() can free many pages, and with page_owner tracking, each free triggers save_stack() which performs stack unwinding under RCU read lock. Without yielding, this creates an unbounded RCU critical section. Add periodic cond_resched() calls within the loop to allow: - RCU grace periods to complete - Other tasks to run - Scheduler to preempt when needed The fix uses need_resched() for immediate response under load, with a batch count of 32 as a guaranteed upper bound to prevent worst-case stalls even under light load.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43293
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix kthread worker destruction in polling mode Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings during module removal. Cancel the hrtimer before destroying the kthread worker to ensure work queues are empty. In polling mode, the driver uses hrtimer to periodically trigger wave5_vpu_timer_callback() which queues work via kthread_queue_work(). The kthread_destroy_worker() function validates that both work queues are empty with WARN_ON(!list_empty(&worker->work_list)) and WARN_ON(!list_empty(&worker->delayed_work_list)). The original code called kthread_destroy_worker() before hrtimer_cancel(), creating a race condition where the timer could fire during worker destruction and queue new work, triggering the WARN_ON. This causes the following warning on every module unload in polling mode: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1034 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 Modules linked in: wave5(-) rpmsg_ctrl rpmsg_char ... Call trace: kthread_destroy_worker+0x84/0x98 wave5_vpu_remove+0xc8/0xe0 [wave5] platform_remove+0x30/0x58 ... ---[ end trace 0000000000000000 ]---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43294
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panels Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L") we may get the following kernel panic, for some panels, when rebooting: systemd-shutdown[1]: Rebooting. Call trace: ... do_serror+0x28/0x68 el1h_64_error_handler+0x34/0x50 el1h_64_error+0x6c/0x70 rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P) mipi_dsi_device_transfer+0x44/0x58 mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4 ili9881c_unprepare+0x38/0x88 drm_panel_unprepare+0xbc/0x108 This happens for panels that need to send MIPI-DSI commands in their unprepare() callback. Since the MIPI-DSI interface is stopped at that point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic. Fix by moving rzg2l_mipi_dsi_stop() to new callback function rzg2l_mipi_dsi_atomic_post_disable(). With this change we now have the correct power-down/stop sequence: systemd-shutdown[1]: Rebooting. rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry reboot: Restarting system

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43295
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net() When idtab allocation fails, net is not registered with rio_add_net() yet, so kfree(net) is sufficient to release the memory. Set mport->net to NULL to avoid dangling pointer.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43296
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit drops by keeping the control-flow clock enabled: - Set TM9 (bit 21) These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this configuration the SQM/PSE maintain forward progress under load without credit loss, at the cost of disabling sticky optimizations.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43297
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rga: Fix possible ERR_PTR dereference in rga_buf_init() rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is unsupported or invalid. rga_buf_init() does not check the return value and unconditionally dereferences the pointer when accessing f->size. Add proper ERR_PTR checking and return the error to prevent dereferencing an invalid pointer.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43298
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Skip vcn poison irq release on VF VF doesn't enable VCN poison irq in VCNv2.5. Skip releasing it and avoid call trace during deinitialization. [ 71.913601] [drm] clean up the vf2pf work item [ 71.915088] ------------[ cut here ]------------ [ 71.915092] WARNING: CPU: 3 PID: 1079 at /tmp/amd.aFkFvSQl/amd/amdgpu/amdgpu_irq.c:641 amdgpu_irq_put+0xc6/0xe0 [amdgpu] [ 71.915355] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_display_helper cec rc_core i2c_algo_bit video wmi binfmt_misc nls_iso8859_1 intel_rapl_msr intel_rapl_common input_leds joydev serio_raw mac_hid qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 hid_generic crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel usbhid 8139too sha256_ssse3 sha1_ssse3 hid psmouse bochs i2c_i801 ahci drm_vram_helper libahci i2c_smbus lpc_ich drm_ttm_helper 8139cp mii ttm aesni_intel crypto_simd cryptd [ 71.915484] CPU: 3 PID: 1079 Comm: rmmod Tainted: G OE 6.8.0-87-generic #88~22.04.1-Ubuntu [ 71.915489] Hardware name: Red Hat KVM/RHEL, BIOS 1.16.3-2.el9_5.1 04/01/2014 [ 71.915492] RIP: 0010:amdgpu_irq_put+0xc6/0xe0 [amdgpu] [ 71.915768] Code: 75 84 b8 ea ff ff ff eb d4 44 89 ea 48 89 de 4c 89 e7 e8 fd fc ff ff 5b 41 5c 41 5d 41 5e 5d 31 d2 31 f6 31 ff e9 55 30 3b c7 <0f> 0b eb d4 b8 fe ff ff ff eb a8 e9 b7 3b 8a 00 66 2e 0f 1f 84 00 [ 71.915771] RSP: 0018:ffffcf0800eafa30 EFLAGS: 00010246 [ 71.915775] RAX: 0000000000000000 RBX: ffff891bda4b0668 RCX: 0000000000000000 [ 71.915777] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 71.915779] RBP: ffffcf0800eafa50 R08: 0000000000000000 R09: 0000000000000000 [ 71.915781] R10: 0000000000000000 R11: 0000000000000000 R12: ffff891bda480000 [ 71.915782] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 71.915792] FS: 000070cff87c4c40(0000) GS:ffff893abfb80000(0000) knlGS:0000000000000000 [ 71.915795] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.915797] CR2: 00005fa13073e478 CR3: 000000010d634006 CR4: 0000000000770ef0 [ 71.915800] PKRU: 55555554 [ 71.915802] Call Trace: [ 71.915805] [ 71.915809] vcn_v2_5_hw_fini+0x19e/0x1e0 [amdgpu]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43300
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove() In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it may be NULL: if (!jdi) mipi_dsi_detach(dsi); However, when jdi is NULL, the function does not return and continues by calling jdi_panel_disable(): err = jdi_panel_disable(&jdi->base); Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can lead to a NULL-pointer dereference: struct jdi_panel *jdi = to_panel_jdi(panel); backlight_disable(jdi->backlight); To prevent such a potential NULL-pointer dereference, return early from jdi_panel_dsi_remove() when jdi is NULL.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43301
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix PM runtime usage count underflow Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in the remove path to properly pair with pm_runtime_use_autosuspend() from probe. This allows pm_runtime_disable() to handle reference count cleanup correctly regardless of current suspend state. The driver calls pm_runtime_put_sync() unconditionally in remove, but the device may already be suspended due to autosuspend configured in probe. When autosuspend has already suspended the device, the usage count is 0, and pm_runtime_put_sync() decrements it to -1. This causes the following warning on module unload: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 ... vdec 30210000.video-codec: Runtime PM usage count underflow!

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43302
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Set DMA segment size to avoid debug warnings When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the kernel occasionally reports a segment size mismatch. This is because 'max_seg_size' is not set. The kernel defaults to 64K. setting 'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()' from complaining about the over-mapping of the V3D segment length. DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536] WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388 CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1 Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_dma_map_sg+0x330/0x388 lr : debug_dma_map_sg+0x330/0x388 sp : ffff8000829a3ac0 x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000 x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000 x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002 x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573 x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000 x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001 x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280 Call trace: debug_dma_map_sg+0x330/0x388 __dma_map_sg_attrs+0xc0/0x278 dma_map_sgtable+0x30/0x58 drm_gem_shmem_get_pages_sgt+0xb4/0x140 v3d_bo_create_finish+0x28/0x130 [v3d] v3d_create_bo_ioctl+0x54/0x180 [v3d] drm_ioctl_kernel+0xc8/0x140 drm_ioctl+0x2d4/0x4d8

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43303
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: clear page->private in free_pages_prepare() Several subsystems (slub, shmem, ttm, etc.) use page->private but don't clear it before freeing pages. When these pages are later allocated as high-order pages and split via split_page(), tail pages retain stale page->private values. This causes a use-after-free in the swap subsystem. The swap code uses page->private to track swap count continuations, assuming freshly allocated pages have page->private == 0. When stale values are present, swap_count_continued() incorrectly assumes the continuation list is valid and iterates over uninitialized page->lru containing LIST_POISON values, causing a crash: KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107] RIP: 0010:__do_sys_swapoff+0x1151/0x1860 Fix this by clearing page->private in free_pages_prepare(), ensuring all freed pages have clean state regardless of previous use.

Published: 2026-05-08Modified: 2026-06-19
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43304
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: libceph: define and enforce CEPH_MAX_KEY_LEN When decoding the key, verify that the key material would fit into a fixed-size buffer in process_auth_done() and generally has a sane length. The new CEPH_MAX_KEY_LEN check replaces the existing check for a key with no key material which is a) not universal since CEPH_CRYPTO_NONE has to be excluded and b) doesn't provide much value since a smaller than needed key is just as invalid as no key -- this has to be handled elsewhere anyway.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43306
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: crypto: Use the correct destructor kfunc type With CONFIG_CFI enabled, the kernel strictly enforces that indirect function calls use a function pointer type that matches the target function. I ran into the following type mismatch when running BPF self-tests: CFI failure at bpf_obj_free_fields+0x190/0x238 (target: bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc) Internal error: Oops - CFI: 00000000f2008228 [#1] SMP ... As bpf_crypto_ctx_release() is also used in BPF programs and using a void pointer as the argument would make the verifier unhappy, add a simple stub function with the correct type and register it as the destructor kfunc instead.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43307
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iio: accel: adxl380: Avoid reading more entries than present in FIFO The interrupt handler reads FIFO entries in batches of N samples, where N is the number of scan elements that have been enabled. However, the sensor fills the FIFO one sample at a time, even when more than one channel is enabled. Therefore,the number of entries reported by the FIFO status registers may not be a multiple of N; if this number is not a multiple, the number of entries read from the FIFO may exceed the number of entries actually present. To fix the above issue, round down the number of FIFO entries read from the status registers so that it is always a multiple of N.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43309
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md raid: fix hang when stopping arrays with metadata through dm-raid When using device-mapper's dm-raid target, stopping a RAID array can cause the system to hang under specific conditions. This occurs when: - A dm-raid managed device tree is suspended from top to bottom (the top-level RAID device is suspended first, followed by its underlying metadata and data devices) - The top-level RAID device is then removed Removing the top-level device triggers a hang in the following sequence: the dm-raid destructor calls md_stop(), which tries to flush the write-intent bitmap by writing to the metadata sub-devices. However, these devices are already suspended, making them unable to complete the write-intent operations and causing an indefinite block. Fix: - Prevent bitmap flushing when md_stop() is called from dm-raid destructor context and avoid a quiescing/unquescing cycle which could also cause I/O - Still allow write-intent bitmap flushing when called from dm-raid suspend context This ensures that RAID array teardown can complete successfully even when the underlying devices are in a suspended state. This second patch uses md_is_rdwr() to distinguish between suspend and destructor paths as elaborated on above.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43312
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5647: Initialize subdev before controls In ov5647_init_controls() we call v4l2_get_subdevdata, but it is initialized by v4l2_i2c_subdev_init() in the probe, which currently happens after init_controls(). This can result in a segfault if the error condition is hit, and we try to access i2c_client, so fix the order.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43313
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4() In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE device and then reassigned an ISA device: dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...); dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...); If the first lookup succeeds but the second fails, dev becomes NULL. This leads to a potential null-pointer dereference when dev_dbg() is called: if (errata.piix4.bmisx) dev_dbg(&dev->dev, ...); To prevent this, use two temporary pointers and retrieve each device independently, avoiding overwriting dev with a possible NULL value. [ rjw: Subject adjustment, added an empty code line ]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43314
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-timeout-fail to dm echo 1 >/sys/class/block/dm-0/io-timeout-fail echo 100 >/sys/kernel/debug/fail_io_timeout/probability echo 10 >/sys/kernel/debug/fail_io_timeout/times 3. read/write dm 4. iscsiadm -m node -u Result: hang task like below [ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds. [ 862.244133] Tainted: G E 6.19.0-rc1+ #51 [ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000 [ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi] [ 862.245264] Call Trace: [ 862.245587] [ 862.245814] __schedule+0x810/0x15c0 [ 862.246557] schedule+0x69/0x180 [ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120 [ 862.247688] elevator_change+0x16d/0x460 [ 862.247893] elevator_set_none+0x87/0xf0 [ 862.248798] blk_unregister_queue+0x12e/0x2a0 [ 862.248995] __del_gendisk+0x231/0x7e0 [ 862.250143] del_gendisk+0x12f/0x1d0 [ 862.250339] sd_remove+0x85/0x130 [sd_mod] [ 862.250650] device_release_driver_internal+0x36d/0x530 [ 862.250849] bus_remove_device+0x1dd/0x3f0 [ 862.251042] device_del+0x38a/0x930 [ 862.252095] __scsi_remove_device+0x293/0x360 [ 862.252291] scsi_remove_target+0x486/0x760 [ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi] [ 862.252886] process_one_work+0x633/0xe50 [ 862.253101] worker_thread+0x6df/0xf10 [ 862.253647] kthread+0x36d/0x720 [ 862.254533] ret_from_fork+0x2a6/0x470 [ 862.255852] ret_from_fork_asm+0x1a/0x30 [ 862.256037] Remove the blk_should_fake_timeout() check from dm, as dm has no native timeout handling and should not attempt to fake timeouts.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43315
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Remove a user-triggerable WARN on nested_svm_load_cr3() succeeding Drop the WARN in svm_set_nested_state() on nested_svm_load_cr3() failing as it is trivially easy to trigger from userspace by modifying CPUID after loading CR3. E.g. modifying the state restoration selftest like so: --- tools/testing/selftests/kvm/x86/state_test.c +++ tools/testing/selftests/kvm/x86/state_test.c @@ -280,7 +280,16 @@ int main(int argc, char *argv[]) /* Restore state in a new VM. */ vcpu = vm_recreate_with_one_vcpu(vm); - vcpu_load_state(vcpu, state); + + if (stage == 4) { + state->sregs.cr3 = BIT(44); + vcpu_load_state(vcpu, state); + + vcpu_set_cpuid_property(vcpu, X86_PROPERTY_MAX_PHY_ADDR, 36); + __vcpu_nested_state_set(vcpu, &state->nested); + } else { + vcpu_load_state(vcpu, state); + } /* * Restore XSAVE state in a dummy vCPU, first without doing generates: WARNING: CPU: 30 PID: 938 at arch/x86/kvm/svm/nested.c:1877 svm_set_nested_state+0x34a/0x360 [kvm_amd] Modules linked in: kvm_amd kvm irqbypass [last unloaded: kvm] CPU: 30 UID: 1000 PID: 938 Comm: state_test Tainted: G W 6.18.0-rc7-58e10b63777d-next-vm Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:svm_set_nested_state+0x34a/0x360 [kvm_amd] Call Trace: kvm_arch_vcpu_ioctl+0xf33/0x1700 [kvm] kvm_vcpu_ioctl+0x4e6/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x61/0xad0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Simply delete the WARN instead of trying to prevent userspace from shoving "illegal" state into CR3. For better or worse, KVM's ABI allows userspace to set CPUID after SREGS, and vice versa, and KVM is very permissive when it comes to guest CPUID. I.e. attempting to enforce the virtual CPU model when setting CPUID could break userspace. Given that the WARN doesn't provide any meaningful protection for KVM or benefit for userspace, simply drop it even though the odds of breaking userspace are minuscule. Opportunistically delete a spurious newline.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43316
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added at all since everything is known to be within bounds. Additionally use an unsigned value for the shift to remove the instrumentation even without the explicit bounds checking. [hverkuil: fix checkpatch warning for is_tw286x]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43317
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: most: core: fix leak on early registration failure A recent commit fixed a resource leak on early registration failures but for some reason left out the first error path which still leaks the resources associated with the interface. Fix up also the first error path so that the interface is always released on errors.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43318
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify Invalidating a dmabuf will impact other users of the shared BO. In the scenario where process A moves the BO, it needs to inform process B about the move and process B will need to update its page table. The commit fixes a synchronisation bug caused by the use of the ticket: it made amdgpu_vm_handle_moved behave as if updating the page table immediately was correct but in this case it's not. An example is the following scenario, with 2 GPUs and glxgears running on GPU0 and Xorg running on GPU1, on a system where P2P PCI isn't supported: glxgears: export linear buffer from GPU0 and import using GPU1 submit frame rendering to GPU0 submit tiled->linear blit Xorg: copy of linear buffer The sequence of jobs would be: drm_sched_job_run # GPU0, frame rendering drm_sched_job_queue # GPU0, blit drm_sched_job_done # GPU0, frame rendering drm_sched_job_run # GPU0, blit move linear buffer for GPU1 access # amdgpu_dma_buf_move_notify -> update pt # GPU0 It this point the blit job on GPU0 is still running and would likely produce a page fault.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43319
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: spi: spidev: fix lock inversion between spi_lock and buf_lock The spidev driver previously used two mutexes, spi_lock and buf_lock, but acquired them in different orders depending on the code path: write()/read(): buf_lock -> spi_lock ioctl(): spi_lock -> buf_lock This AB-BA locking pattern triggers lockdep warnings and can cause real deadlocks: WARNING: possible circular locking dependency detected spidev_ioctl() -> mutex_lock(&spidev->buf_lock) spidev_sync_write() -> mutex_lock(&spidev->spi_lock) *** DEADLOCK *** The issue is reproducible with a simple userspace program that performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from separate threads on the same spidev file descriptor. Fix this by simplifying the locking model and removing the lock inversion entirely. spidev_sync() no longer performs any locking, and all callers serialize access using spi_lock. buf_lock is removed since its functionality is fully covered by spi_lock, eliminating the possibility of lock ordering issues. This removes the lock inversion and prevents deadlocks without changing userspace ABI or behaviour.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43320
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dsc eDP issue [why] Need to add function hook check before use

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43351
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Eagerly init vgic dist/redist on vgic creation If vgic_allocate_private_irqs_locked() fails for any odd reason, we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised. kvm_vgic_dist_destroy() then comes along and walks into the weeds trying to free the RDs. Got to love this stuff. Solve it by moving all the static initialisation early, and make sure that if we fail halfway, we're in a reasonable shape to perform the rest of the teardown. While at it, reset the vgic model on failure, just in case...

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43352
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue The logic used to abort the DMA ring contains several flaws: 1. The driver unconditionally issues a ring abort even when the ring has already stopped. 2. The completion used to wait for abort completion is never re-initialized, resulting in incorrect wait behavior. 3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which resets hardware ring pointers and disrupts the controller state. 4. If the ring is already stopped, the abort operation should be considered successful without attempting further action. Fix the abort handling by checking whether the ring is running before issuing an abort, re-initializing the completion when needed, ensuring that RING_CTRL_ENABLE remains asserted during abort, and treating an already stopped ring as a successful condition.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43353
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in DMA ring dequeue The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for multiple transfers that timeout around the same time. However, the function is not serialized and can race with itself. When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes incomplete transfers, and then restarts the ring. If another timeout triggers a parallel call into the same function, the two instances may interfere with each other - stopping or restarting the ring at unexpected times. Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to itself.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43354
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: proximity: hx9023s: Protect against division by zero in set_samp_freq Avoid division by zero when sampling frequency is unspecified.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43355
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43356
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis: Fix NULL pointer dereference in adis_init The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43357
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050-core: fix pm_runtime error handling The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43358
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer() Call rcu_read_lock() before exiting the loop in try_release_subpage_extent_buffer() because there is a rcu_read_unlock() call past the loop. This has been detected by the Clang thread-safety analyzer.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43359
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on set received ioctl due to item overflow If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43360
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on file creation due to name hash collision If we attempt to create several files with names that result in the same hash, we have to pack them in same dir item and that has a limit inherent to the leaf size. However if we reach that limit, we trigger a transaction abort and turns the filesystem into RO mode. This allows for a malicious user to disrupt a system, without the need to have administration privileges/capabilities. Reproducer: $ cat exploit-hash-collisions.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster and require fewer file # names that result in hash collision. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # List of names that result in the same crc32c hash for btrfs. declare -a names=( 'foobar' '%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC' 'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z' 'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4' 'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:' 'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO' 'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us' 'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY' 'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO' 'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU' 'Ono7avN5GjC:_6dBJ_' 'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am' 'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k' 'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2' 'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd' 'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm' 'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ' 'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky' 'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS' 'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz' 'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu' 'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN' 'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4=' 'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn' 'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C' 'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW' '8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc' 'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43361
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort when snapshotting received subvolumes Currently a user can trigger a transaction abort by snapshotting a previously received snapshot a bunch of times until we reach a BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we can store in a leaf). This is very likely not common in practice, but if it happens, it turns the filesystem into RO mode. The snapshot, send and set_received_subvol and subvol_setflags (used by receive) don't require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user could use this to turn a filesystem into RO mode and disrupt a system. Reproducer script: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # Create a subvolume and set it to RO so that it can be used for send. btrfs subvolume create $MNT/sv touch $MNT/sv/foo btrfs property set $MNT/sv ro true # Send and receive the subvolume into snaps/sv. mkdir $MNT/snaps btrfs send $MNT/sv | btrfs receive $MNT/snaps # Now snapshot the received subvolume, which has a received_uuid, a # lot of times to trigger the leaf overflow. total=500 for ((i = 1; i <= $total; i++)); do echo -ne "\rCreating snapshot $i/$total" btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null done echo umount $MNT When running the test: $ ./test.sh (...) Create subvolume '/mnt/sdi/sv' At subvol /mnt/sdi/sv At subvol sv Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system And in dmesg/syslog: $ dmesg (...) [251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252! [251067.629212] ------------[ cut here ]------------ [251067.630033] BTRFS: Transaction aborted (error -75) [251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235 [251067.632851] Modules linked in: btrfs dm_zero (...) [251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [251067.646165] Tainted: [W]=WARN [251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs] [251067.649984] Code: f0 48 0f (...) [251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292 [251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3 [251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750 [251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820 [251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0 [251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5 [251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000 [251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0 [251067.661972] Call Trace: [251067.662292] [251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs] [251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs] [251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs] [251067.665238] ? _raw_spin_unlock+0x15/0x30 [251067.665837] ? record_root_ ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43362
HIGH8.1

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 8.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H
References
CVE-2026-43363
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43365
HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Ending clean mount ...on the current xfsprogs for-next which has a broken mkfs. xfs_info shows this... meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 = exchange=1 metadir=1 data = bsize=4096 blocks=2579968, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=4096 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 = rgcount=0 rgsize=268435456 extents = zoned=0 start=0 reserved=0 ...observe that the log section has sectsz=4096 sunit=0, which means that the roundoff factor is 512, not 4096 as you'd expect. We should fix mkfs not to generate broken filesystems, but anyone can fuzz the ondisk superblock so we should be more cautious. I think the inadequate logic predates commit a6a65fef5ef8d0, but that's clearly going to require a different backport.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 8.2
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H
References
CVE-2026-43366
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43368
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential overflow of shmem scatterlist length When a scatterlists table of a GEM shmem object of size 4 GB or more is populated with pages allocated from a folio, unsigned int .length attribute of a scatterlist may get overflowed if total byte length of pages allocated to that single scatterlist happens to reach or cross the 4GB limit. As a consequence, users of the object may suffer from hitting unexpected, premature end of the object's backing pages. [278.780187] ------------[ cut here ]------------ [278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915] ... [278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary) [278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 [278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915] ... [278.780786] Call Trace: [278.780787] [278.780788] ? __apply_to_page_range+0x3e6/0x910 [278.780795] ? __pfx_remap_sg+0x10/0x10 [i915] [278.780906] apply_to_page_range+0x14/0x30 [278.780908] remap_io_sg+0x14d/0x260 [i915] [278.781013] vm_fault_cpu+0xd2/0x330 [i915] [278.781137] __do_fault+0x3a/0x1b0 [278.781140] do_fault+0x322/0x640 [278.781143] __handle_mm_fault+0x938/0xfd0 [278.781150] handle_mm_fault+0x12c/0x300 [278.781152] ? lock_mm_and_find_vma+0x4b/0x760 [278.781155] do_user_addr_fault+0x2d6/0x8e0 [278.781160] exc_page_fault+0x96/0x2c0 [278.781165] asm_exc_page_fault+0x27/0x30 ... That issue was apprehended by the author of a change that introduced it, and potential risk even annotated with a comment, but then never addressed. When adding folio pages to a scatterlist table, take care of byte length of any single scatterlist not exceeding max_segment. (cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43370
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43372
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Fix error path in PTP IRQ setup If request_threaded_irq() fails during the PTP message IRQ setup, the newly created IRQ mapping is never disposed. Indeed, the ksz_ptp_irq_setup()'s error path only frees the mappings that were successfully set up. Dispose the newly created mapping if the associated request_threaded_irq() fails at setup.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43373
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: ncsi: fix skb leak in error paths Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43374
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix percpu use-after-free in remove_nh_grp_entry When removing a nexthop from a group, remove_nh_grp_entry() publishes the new group via rcu_assign_pointer() then immediately frees the removed entry's percpu stats with free_percpu(). However, the synchronize_net() grace period in the caller remove_nexthop_from_groups() runs after the free. RCU readers that entered before the publish still see the old group and can dereference the freed stats via nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a use-after-free on percpu memory. Fix by deferring the free_percpu() until after synchronize_net() in the caller. Removed entries are chained via nh_list onto a local deferred free list. After the grace period completes and all RCU readers have finished, the percpu stats are safely freed.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43375
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: mctp: fix device leak on probe failure Driver core holds a reference to the USB interface and its parent USB device while the interface is bound to a driver and there is no need to take additional references unless the structures are needed after disconnect. This driver takes a reference to the USB device during probe but does not to release it on probe failures. Drop the redundant device reference to fix the leak, reduce cargo culting, make it easier to spot drivers where an extra reference is needed, and reduce the risk of further memory leaks.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43376
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free by using call_rcu() for oplock_info ksmbd currently frees oplock_info immediately using kfree(), even though it is accessed under RCU read-side critical sections in places like opinfo_get() and proc_show_files(). Since there is no RCU grace period delay between nullifying the pointer and freeing the memory, a reader can still access oplock_info structure after it has been freed. This can leads to a use-after-free especially in opinfo_get() where atomic_inc_not_zero() is called on already freed memory. Fix this by switching to deferred freeing using call_rcu().

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43378
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is dereferenced after rcu_read_unlock(), creating a use-after-free window.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43379
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close() opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being accessed after rcu_read_unlock() has been called. This creates a race condition where the memory could be freed by a concurrent writer between the unlock and the subsequent pointer dereferences (opinfo->is_lease, etc.), leading to a use-after-free.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43380
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the zero-initialized 'data_char' and writing to 'data', resulting in all-zero output regardless of the actual I2C read. Fix this by: 1. Expanding 'data_char' to 66 bytes to safely hold the hex output. 2. Correcting the bin2hex() argument order and using the actual read count. 3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43381
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43382
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43383
CRITICAL9.4

In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

Published: 2026-05-08Modified: 2026-06-19
CVSS 3.xCRITICAL 9.4
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H
References
CVE-2026-43384
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43386
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43387
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43388
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: clear walk_control on inactive context in damos_walk() damos_walk() sets ctx->walk_control to the caller-provided control structure before checking whether the context is running. If the context is inactive (damon_is_running() returns false), the function returns -EINVAL without clearing ctx->walk_control. This leaves a dangling pointer to a stack-allocated structure that will be freed when the caller returns. This is structurally identical to the bug fixed in commit f9132fbc2e83 ("mm/damon/core: remove call_control in inactive contexts") for damon_call(), which had the same pattern of linking a control object and returning an error without unlinking it. The dangling walk_control pointer can cause: 1. Use-after-free if the context is later started and kdamond    dereferences ctx->walk_control (e.g., in damos_walk_cancel()    which writes to control->canceled and calls complete()) 2. Permanent -EBUSY from subsequent damos_walk() calls, since the    stale pointer is non-NULL Nonetheless, the real user impact is quite restrictive. The use-after-free is impossible because there is no damos_walk() callers who starts the context later. The permanent -EBUSY can actually confuse users, as DAMON is not running. But the symptom is kept only while the context is turned off. Turning it on again will make DAMON internally uses a newly generated damon_ctx object that doesn't have the invalid damos_walk_control pointer, so everything will work fine again. Fix this by clearing ctx->walk_control under walk_control_lock before returning -EINVAL, mirroring the fix pattern from f9132fbc2e83.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43393
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies() Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL, we're not freeing the chunk map that we've just looked up.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43394
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit(). nfsd_nl_listener_set_doit() uses get_current_cred() without put_cred(). As we can see from other callers, svc_xprt_create_from_sa() does not require the extra refcount. nfsd_nl_listener_set_doit() is always in the process context, sendmsg(), and current->cred does not go away. Let's use current_cred() in nfsd_nl_listener_set_doit().

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43395
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Cleanup partially initialized sync on parse failure xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence, or user fence) before hitting a later failure path. Several of those paths returned directly, leaving partially initialized state and leaking refs. Route these error paths through a common free_sync label and call xe_sync_entry_cleanup(sync) before returning the error. (cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43397
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: Fix memory leak in error path In samsung_dsim_host_attach(), drm_bridge_add() is called to add the bridge. However, if samsung_dsim_register_te_irq() or pdata->host_ops->attach() fails afterwards, the function returns without removing the bridge, causing a memory leak. Fix this by adding proper error handling with goto labels to ensure drm_bridge_remove() is called in all error paths. Also ensure that samsung_dsim_unregister_te_irq() is called if the attach operation fails after the TE IRQ has been registered. samsung_dsim_unregister_te_irq() function is moved without changes to be before samsung_dsim_host_attach() to avoid forward declaration.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43398
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in wait ioctl Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. v2: squash in Srini's fix (cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43399
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl Drop reference to syncobj and timeline fence when aborting the ioctl due output array being too small. (cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43400
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in signal ioctl Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. (cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43401
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request() The update_cpu_qos_request() function attempts to initialize the 'freq' variable by dereferencing 'cpudata' before verifying if the 'policy' is valid. This issue occurs on systems booted with the "nosmt" parameter, where all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result, any call to update_qos_requests() will result in a NULL pointer dereference as the code will attempt to access pstate.turbo_freq using the NULL cpudata pointer. Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap() after initializing the 'freq' variable, so it is better to defer the 'freq' until intel_pstate_get_hwp_cap() has been called. Fix this by deferring the 'freq' assignment until after the policy and driver_data have been validated. [ rjw: Added one paragraph to the changelog ]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43402
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free Guillaume reported crashes via corrupted RCU callback function pointers during KUnit testing. The crash was traced back to the pidfs rhashtable conversion which replaced the 24-byte rb_node with an 8-byte rhash_head in struct pid, shrinking it from 160 to 144 bytes. struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to 192 bytes and share the same slab cache. struct pid.rcu.func and struct kthread.affinity_node both sit at offset 0x78. When a kthread exits via make_task_dead() it bypasses kthread_exit() and misses the affinity_node cleanup. free_kthread_struct() frees the memory while the node is still linked into the global kthread_affinity_list. A subsequent list_del() by another kthread writes through dangling list pointers into the freed and reused memory, corrupting the pid's rcu.func pointer. Instead of patching free_kthread_struct() to handle the missed cleanup, consolidate all kthread exit paths. Turn kthread_exit() into a macro that calls do_exit() and add kthread_do_exit() which is called from do_exit() for any task with PF_KTHREAD set. This guarantees that kthread-specific cleanup always happens regardless of the exit path - make_task_dead(), direct do_exit(), or kthread_exit(). Replace __to_kthread() with a new tsk_is_kthread() accessor in the public header. Export do_exit() since module code using the kthread_exit() macro now needs it directly.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43404
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all() for a system memory folio while a folio lock is held on a zone device folio. b) The zone device folio has an initial mapcount > 1 which causes at least one migration PTE entry insertion to be deferred to try_to_migrate(), which can happen after the call to lru_add_drain_all(). c) No or voluntary only preemption. This all seems pretty unlikely to happen, but indeed is hit by the "xe_exec_system_allocator" igt test. Resolve this by waiting for the folio to be unlocked if the folio_trylock() fails in do_swap_page(). Rename migration_entry_wait_on_locked() to softleaf_entry_wait_unlock() and update its documentation to indicate the new use-case. Future code improvements might consider moving the lru_add_drain_all() call in migrate_device_unmap() to be called *after* all pages have migration entries inserted. That would eliminate also b) above. v2: - Instead of a cond_resched() in hmm_range_fault(), eliminate the problem by waiting for the folio to be unlocked in do_swap_page() (Alistair Popple, Andrew Morton) v3: - Add a stub migration_entry_wait_on_locked() for the !CONFIG_MIGRATION case. (Kernel Test Robot) v4: - Rename migrate_entry_wait_on_locked() to softleaf_entry_wait_on_locked() and update docs (Alistair Popple) v5: - Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION version of softleaf_entry_wait_on_locked(). - Modify wording around function names in the commit message (Andrew Morton) (cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43405
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43406
CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43407
CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43408
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ceph: add a bunch of missing ceph_path_info initializers ceph_mdsc_build_path() must be called with a zero-initialized ceph_path_info parameter, or else the following ceph_mdsc_free_path_info() may crash. Example crash (on Linux 6.18.12): virt_to_cache: Object is not a Slab page! WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400 [...] Call Trace: [...] ceph_open+0x13d/0x3e0 do_dentry_open+0x134/0x480 vfs_open+0x2a/0xe0 path_openat+0x9a3/0x1160 [...] cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400 [...] kernel BUG at mm/slub.c:634! Oops: invalid opcode: 0000 [#1] SMP NOPTI RIP: 0010:__slab_free+0x1a4/0x350 Some of the ceph_mdsc_build_path() callers had initializers, but others had not, even though they were all added by commit 15f519e9f883 ("ceph: fix race condition validating r_parent before applying state"). The ones without initializer are suspectible to random crashes. (I can imagine it could even be possible to exploit this bug to elevate privileges.) Unfortunately, these Ceph functions are undocumented and its semantics can only be derived from the code. I see that ceph_mdsc_build_path() initializes the structure only on success, but not on error. Calling ceph_mdsc_free_path_info() after a failed ceph_mdsc_build_path() call does not even make sense, but that's what all callers do, and for it to be safe, the structure must be zero-initialized. The least intrusive approach to fix this is therefore to add initializers everywhere.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43409
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: kprobes: avoid crash when rmmod/insmod after ftrace killed After we hit ftrace is killed by some errors, the kernel crash if we remove modules in which kprobe probes. BUG: unable to handle page fault for address: fffffbfff805000d PGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OE Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:kprobes_module_callback+0x89/0x790 RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02 RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX: ffffffff86a8de90 RDX: ffffed1025c2af9b RSI: 0000000000000008 RDI: ffffffffc0280068 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed1025c2af9a R10: ffff88812e157cd7 R11: 205d323130325420 R12: 0000000000000002 R13: ffffffffc0290488 R14: 0000000000000002 R15: ffffffffc0280040 FS: 00007fbc450dd740(0000) GS:ffff888420331000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff805000d CR3: 000000010f624000 CR4: 00000000000006f0 Call Trace: notifier_call_chain+0xc6/0x280 blocking_notifier_call_chain+0x60/0x90 __do_sys_delete_module.constprop.0+0x32a/0x4e0 do_syscall_64+0x5d/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because the kprobe on ftrace does not correctly handles the kprobe_ftrace_disabled flag set by ftrace_kill(). To prevent this error, check kprobe_ftrace_disabled in __disarm_kprobe_ftrace() and skip all ftrace related operations.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43411
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set conn_timeout to any value via setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in tipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4); If conn_timeout is in the range [0, 3], the integer division yields 0, and the modulo operation triggers a divide-by-zero exception, causing a kernel oops/panic. Fix this by clamping conn_timeout to a minimum of 4 at the point of use in tipc_sk_filter_connect(). Oops: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+ RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362) Call Trace: tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406) __release_sock (include/net/sock.h:1185 net/core/sock.c:3213) release_sock (net/core/sock.c:3797) tipc_connect (net/tipc/socket.c:2570) __sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43412
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and start During ADSP stop and start, the kernel crashes due to the order in which ASoC components are removed. On ADSP stop, the q6apm-audio .remove callback unloads topology and removes PCM runtimes during ASoC teardown. This deletes the RTDs that contain the q6apm DAI components before their removal pass runs, leaving those components still linked to the card and causing crashes on the next rebind. Fix this by ensuring that all dependent (child) components are removed first, and the q6apm component is removed last. [ 48.105720] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [ 48.114763] Mem abort info: [ 48.117650] ESR = 0x0000000096000004 [ 48.121526] EC = 0x25: DABT (current EL), IL = 32 bits [ 48.127010] SET = 0, FnV = 0 [ 48.130172] EA = 0, S1PTW = 0 [ 48.133415] FSC = 0x04: level 0 translation fault [ 48.138446] Data abort info: [ 48.141422] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 48.147079] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 48.152354] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 48.157859] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001173cf000 [ 48.164517] [00000000000000d0] pgd=0000000000000000, p4d=0000000000000000 [ 48.171530] Internal error: Oops: 0000000096000004 [#1] SMP [ 48.177348] Modules linked in: q6prm_clocks q6apm_lpass_dais q6apm_dai snd_q6dsp_common q6prm snd_q6apm 8021q garp mrp stp llc snd_soc_hdmi_codec apr pdr_interface phy_qcom_edp fastrpc qcom_pd_mapper rpmsg_ctrl qrtr_smd rpmsg_char qcom_pdr_msg qcom_iris v4l2_mem2mem videobuf2_dma_contig ath11k_pci msm ubwc_config at24 ath11k videobuf2_memops mac80211 ocmem videobuf2_v4l2 libarc4 drm_gpuvm mhi qrtr videodev drm_exec snd_soc_sc8280xp gpu_sched videobuf2_common nvmem_qcom_spmi_sdam snd_soc_qcom_sdw drm_dp_aux_bus qcom_q6v5_pas qcom_spmi_temp_alarm snd_soc_qcom_common rtc_pm8xxx qcom_pon drm_display_helper cec qcom_pil_info qcom_stats soundwire_bus drm_client_lib mc dispcc0_sa8775p videocc_sa8775p qcom_q6v5 camcc_sa8775p snd_soc_dmic phy_qcom_sgmii_eth snd_soc_max98357a i2c_qcom_geni snd_soc_core dwmac_qcom_ethqos llcc_qcom icc_bwmon qcom_sysmon snd_compress qcom_refgen_regulator coresight_stm stmmac_platform snd_pcm_dmaengine qcom_common coresight_tmc stmmac coresight_replicator qcom_glink_smem coresight_cti stm_core [ 48.177444] coresight_funnel snd_pcm ufs_qcom phy_qcom_qmp_usb gpi phy_qcom_snps_femto_v2 coresight phy_qcom_qmp_ufs qcom_wdt gpucc_sa8775p pcs_xpcs mdt_loader qcom_ice icc_osm_l3 qmi_helpers snd_timer snd soundcore display_connector qcom_rng nvmem_reboot_mode drm_kms_helper phy_qcom_qmp_pcie sha256 cfg80211 rfkill socinfo fuse drm backlight ipv6 [ 48.301059] CPU: 2 UID: 0 PID: 293 Comm: kworker/u32:2 Not tainted 6.19.0-rc6-dirty #10 PREEMPT [ 48.310081] Hardware name: Qualcomm Technologies, Inc. Lemans EVK (DT) [ 48.316782] Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] [ 48.323672] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 48.330825] pc : mutex_lock+0xc/0x54 [ 48.334514] lr : soc_dapm_shutdown_dapm+0x44/0x174 [snd_soc_core] [ 48.340794] sp : ffff800084ddb7b0 [ 48.344207] x29: ffff800084ddb7b0 x28: ffff00009cd9cf30 x27: ffff00009cd9cc00 [ 48.351544] x26: ffff000099610190 x25: ffffa31d2f19c810 x24: ffffa31d2f185098 [ 48.358869] x23: ffff800084ddb7f8 x22: 0000000000000000 x21: 00000000000000d0 [ 48.366198] x20: ffff00009ba6c338 x19: ffff00009ba6c338 x18: 00000000ffffffff [ 48.373528] x17: 000000040044ffff x16: ffffa31d4ae6dca8 x15: 072007740775076f [ 48.380853] x14: 0765076d07690774 x13: 00313a323a656369 x12: 767265733a637673 [ 48.388182] x11: 00000000000003f9 x10: ffffa31d4c7dea98 x9 : 0000000000000001 [ 48.395519] x8 : ffff00009a2aadc0 x7 : 0000000000000003 x6 : 0000000000000000 [ 48.402854] x5 : 0000000000000 ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43413
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Fix NULL pointer exception during user_scan() user_scan() invokes updated sas_user_scan() for channel 0, and if successful, iteratively scans remaining channels (1 to shost->max_channel) via scsi_scan_host_selected() in commit 37c4e72b0651 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"). However, hisi_sas supports only one channel, and the current value of max_channel is 1. sas_user_scan() for channel 1 will trigger the following NULL pointer exception: [ 441.554662] Unable to handle kernel NULL pointer dereference at virtual address 00000000000008b0 [ 441.554699] Mem abort info: [ 441.554710] ESR = 0x0000000096000004 [ 441.554718] EC = 0x25: DABT (current EL), IL = 32 bits [ 441.554723] SET = 0, FnV = 0 [ 441.554726] EA = 0, S1PTW = 0 [ 441.554730] FSC = 0x04: level 0 translation fault [ 441.554735] Data abort info: [ 441.554737] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 441.554742] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 441.554747] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 441.554752] user pgtable: 4k pages, 48-bit VAs, pgdp=00000828377a6000 [ 441.554757] [00000000000008b0] pgd=0000000000000000, p4d=0000000000000000 [ 441.554769] Internal error: Oops: 0000000096000004 [#1] SMP [ 441.629589] Modules linked in: arm_spe_pmu arm_smmuv3_pmu tpm_tis_spi hisi_uncore_sllc_pmu hisi_uncore_pa_pmu hisi_uncore_l3c_pmu hisi_uncore_hha_pmu hisi_uncore_ddrc_pmu hisi_uncore_cpa_pmu hns3_pmu hisi_ptt hisi_pcie_pmu tpm_tis_core spidev spi_hisi_sfc_v3xx hisi_uncore_pmu spi_dw_mmio fuse hclge hclge_common hisi_sec2 hisi_hpre hisi_zip hisi_qm hns3 hisi_sas_v3_hw sm3_ce sbsa_gwdt hnae3 hisi_sas_main uacce hisi_dma i2c_hisi dm_mirror dm_region_hash dm_log dm_mod [ 441.670819] CPU: 46 UID: 0 PID: 6994 Comm: bash Kdump: loaded Not tainted 7.0.0-rc2+ #84 PREEMPT [ 441.691327] pstate: 81400009 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 441.698277] pc : sas_find_dev_by_rphy+0x44/0x118 [ 441.702896] lr : sas_find_dev_by_rphy+0x3c/0x118 [ 441.707502] sp : ffff80009abbba40 [ 441.710805] x29: ffff80009abbba40 x28: ffff082819a40008 x27: ffff082810c37c08 [ 441.717930] x26: ffff082810c37c28 x25: ffff082819a40290 x24: ffff082810c37c00 [ 441.725054] x23: 0000000000000000 x22: 0000000000000001 x21: ffff082819a40000 [ 441.732179] x20: ffff082819a40290 x19: 0000000000000000 x18: 0000000000000020 [ 441.739304] x17: 0000000000000000 x16: ffffb5dad6bda690 x15: 00000000ffffffff [ 441.746428] x14: ffff082814c3b26c x13: 00000000ffffffff x12: ffff082814c3b26a [ 441.753553] x11: 00000000000000c0 x10: 000000000000003a x9 : ffffb5dad5ea94f4 [ 441.760678] x8 : 000000000000003a x7 : ffff80009abbbab0 x6 : 0000000000000030 [ 441.767802] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 441.774926] x2 : ffff08280f35a300 x1 : ffffb5dad7127180 x0 : 0000000000000000 [ 441.782053] Call trace: [ 441.784488] sas_find_dev_by_rphy+0x44/0x118 (P) [ 441.789095] sas_target_alloc+0x24/0xb0 [ 441.792920] scsi_alloc_target+0x290/0x330 [ 441.797010] __scsi_scan_target+0x88/0x258 [ 441.801096] scsi_scan_channel+0x74/0xb8 [ 441.805008] scsi_scan_host_selected+0x170/0x188 [ 441.809615] sas_user_scan+0xfc/0x148 [ 441.813267] store_scan+0x10c/0x180 [ 441.816743] dev_attr_store+0x20/0x40 [ 441.820398] sysfs_kf_write+0x84/0xa8 [ 441.824054] kernfs_fop_write_iter+0x130/0x1c8 [ 441.828487] vfs_write+0x2c0/0x370 [ 441.831880] ksys_write+0x74/0x118 [ 441.835271] __arm64_sys_write+0x24/0x38 [ 441.839182] invoke_syscall+0x50/0x120 [ 441.842919] el0_svc_common.constprop.0+0xc8/0xf0 [ 441.847611] do_el0_svc+0x24/0x38 [ 441.850913] el0_svc+0x38/0x158 [ 441.854043] el0t_64_sync_handler+0xa0/0xe8 [ 441.858214] el0t_64_sync+0x1ac/0x1b0 [ 441.861865] Code: aa1303e0 97ff70a8 34ffff80 d10a4273 (f9445a75) [ 441.867946] ---[ end trace 0000000000000000 ]--- Therefore ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43415
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op, POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can still be running while ufshcd_vops_suspend() is executing. When UFSHCD_CAP_CLK_GATING is not supported, the condition !hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc() to be executed. Since ufshcd_vops_suspend() typically performs clock gating operations, executing ufshcd_update_rtc() at that moment triggers an SError. The kernel panic trace is as follows: Kernel panic - not syncing: Asynchronous SError Interrupt Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 panic+0x148/0x374 nmi_panic+0x3c/0x8c arm64_serror_panic+0x64/0x8c do_serror+0xc4/0xc8 el1h_64_error_handler+0x34/0x4c el1h_64_error+0x68/0x6c el1_interrupt+0x20/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c ktime_get+0xc4/0x12c ufshcd_mcq_sq_stop+0x4c/0xec ufshcd_mcq_sq_cleanup+0x64/0x1dc ufshcd_clear_cmd+0x38/0x134 ufshcd_issue_dev_cmd+0x298/0x4d0 ufshcd_exec_dev_cmd+0x1a4/0x1c4 ufshcd_query_attr+0xbc/0x19c ufshcd_rtc_work+0x10c/0x1c8 process_scheduled_works+0x1c4/0x45c worker_thread+0x32c/0x3e8 kthread+0x120/0x1d8 ret_from_fork+0x10/0x20 Fix this by moving cancel_delayed_work_sync() before the call to ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is fully completed or cancelled at that point.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43416
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: powerpc, perf: Check that current->mm is alive before getting user callchain It may happen that mm is already released, which leads to kernel panic. This adds the NULL check for current->mm, similarly to commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain"). I was getting this panic when running a profiling BPF program (profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952] Faulting instruction address: 0xc00000000020fac0 [26215.051957] Oops: Kernel access of bad area, sig: 11 [#1] [...] [26215.052049] Call Trace: [26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable) [26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30 [26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360 [26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0 [26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274 [...] In addition, move storing the top-level stack entry to generic perf_callchain_user to make sure the top-evel entry is always captured, even if current->mm is NULL. [Maddy: fixed message to avoid checkpatch format style error]

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43419
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43420
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: ceph: fix i_nlink underrun during async unlink During async unlink, we drop the `i_nlink` counter before we receive the completion (that will eventually update the `i_nlink`) because "we assume that the unlink will succeed". That is not a bad idea, but it races against deletions by other clients (or against the completion of our own unlink) and can lead to an underrun which emits a WARNING like this one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655 Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drop_nlink+0x50/0x68 lr : ceph_unlink+0x6c4/0x720 sp : ffff80012173bc90 x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680 x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647 x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203 x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365 x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74 x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94 x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002 x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8 Call trace: drop_nlink+0x50/0x68 (P) vfs_unlink+0xb0/0x2e8 do_unlinkat+0x204/0x288 __arm64_sys_unlinkat+0x3c/0x80 invoke_syscall.constprop.0+0x54/0xe8 do_el0_svc+0xa4/0xc8 el0_svc+0x18/0x58 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x154/0x158 In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion. Meanwhile, between this call and the following drop_nlink() call, a worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own completion). These will lead to a set_nlink() call, updating the `i_nlink` counter to the value received from the MDS. If that new `i_nlink` value happens to be zero, it is illegal to decrement it further. But that is exactly what ceph_unlink() will do then. The WARNING can be reproduced this way: 1. Force async unlink; only the async code path is affected. Having no real clue about Ceph internals, I was unable to find out why the MDS wouldn't give me the "Fxr" capabilities, so I patched get_caps_for_async_unlink() to always succeed. (Note that the WARNING dump above was found on an unpatched kernel, without this kludge - this is not a theoretical bug.) 2. Add a sleep call after ceph_mdsc_submit_request() so the unlink completion gets handled by a worker thread before drop_nlink() is called. This guarantees that the `i_nlink` is already zero before drop_nlink() runs. The solution is to skip the counter decrement when it is already zero, but doing so without a lock is still racy (TOCTOU). Since ceph_fill_inode() and handle_cap_grant() both hold the `ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this seems like the proper lock to protect the `i_nlink` updates. I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using `afs_vnode.cb_lock`). All three have the zero check as well.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43421
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results in a regression where the DHCP server fails on pmOS. Use device_move to reparent the net_device between the gadget device and /sys/devices/virtual/ across bind/unbind cycles. This preserves the network interface across USB reconnection, allowing the DHCP server to retain their binding. Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use __free(detach_gadget) macro to undo attachment on bind failure. The bind_count ensures device_move executes only on the first bind. [1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/ [2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/

Published: 2026-05-08Modified: 2026-06-19
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43424
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically managed and tied to userspace configuration via ConfigFS. It can be NULL if the USB host sends requests before the nexus is fully established or immediately after it is dropped. Currently, functions like `bot_submit_command()` and the data transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately dereference `tv_nexus->tvn_se_sess` without any validation. If a malicious or misconfigured USB host sends a BOT (Bulk-Only Transport) command during this race window, it triggers a NULL pointer dereference, leading to a kernel panic (local DoS). This exposes an inconsistent API usage within the module, as peer functions like `usbg_submit_command()` and `bot_send_bad_response()` correctly implement a NULL check for `tv_nexus` before proceeding. Fix this by bringing consistency to the nexus handling. Add the missing `if (!tv_nexus)` checks to the vulnerable BOT command and request processing paths, aborting the command gracefully with an error instead of crashing the system.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43425
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit 372c93131998 ("USB: yurex: fix control-URB timeout handling") - commit b98d5000c505 ("media: rc: iguanair: handle timeouts")

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43426
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43427
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43428
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43429
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43430
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43432
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43433
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: rust_binder: avoid reading the written value in offsets array When sending a transaction, its offsets array is first copied into the target proc's vma, and then the values are read back from there. This is normally fine because the vma is a read-only mapping, so the target process cannot change the value under us. However, if the target process somehow gains the ability to write to its own vma, it could change the offset before it's read back, causing the kernel to misinterpret what the sender meant. If the sender happens to send a payload with a specific shape, this could in the worst case lead to the receiver being able to privilege escalate into the sender. The intent is that gaining the ability to change the read-only vma of your own process should not be exploitable, so remove this TOCTOU read even though it's unexploitable without another Binder bug.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43434
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: rust_binder: check ownership before using vma When installing missing pages (or zapping them), Rust Binder will look up the vma in the mm by address, and then call vm_insert_page (or zap_page_range_single). However, if the vma is closed and replaced with a different vma at the same address, this can lead to Rust Binder installing pages into the wrong vma. By installing the page into a writable vma, it becomes possible to write to your own binder pages, which are normally read-only. Although you're not supposed to be able to write to those pages, the intent behind the design of Rust Binder is that even if you get that ability, it should not lead to anything bad. Unfortunately, due to another bug, that is not the case. To fix this, store a pointer in vm_private_data and check that the vma returned by vma_lookup() has the right vm_ops and vm_private_data before trying to use the vma. This should ensure that Rust Binder will refuse to interact with any other VMA. The plan is to introduce more vma abstractions to avoid this unsafe access to vm_ops and vm_private_data, but for now let's start with the simplest possible fix. C Binder performs the same check in a slightly different way: it provides a vm_ops->close that sets a boolean to true, then checks that boolean after calling vma_lookup(), but this is more fragile than the solution in this patch. (We probably still want to do both, but the vm_ops->close callback will be added later as part of the follow-up vma API changes.) It's still possible to remap the vma so that pages appear in the right vma, but at the wrong offset, but this is a separate issue and will be fixed when Rust Binder gets a vm_ops->close callback.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43435
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rust_binder: fix oneway spam detection The spam detection logic in TreeRange was executed before the current request was inserted into the tree. So the new request was not being factored in the spam calculation. Fix this by moving the logic after the new range has been inserted. Also, the detection logic for ArrayRange was missing altogether which meant large spamming transactions could get away without being detected. Fix this by implementing an equivalent low_oneway_space() in ArrayRange. Note that I looked into centralizing this logic in RangeAllocator but iterating through 'state' and 'size' got a bit too complicated (for me) and I abandoned this effort.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43436
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces The Scarlett2 mixer quirk in USB-audio driver may hit a NULL dereference when a malformed USB descriptor is passed, since it assumes the presence of an endpoint in the parsed interface in scarlett2_find_fc_interface(), as reported by fuzzer. For avoiding the NULL dereference, just add the sanity check of bNumEndpoints and skip the invalid interface.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43437
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() In the drain loop, the local variable 'runtime' is reassigned to a linked stream's runtime (runtime = s->runtime at line 2157). After releasing the stream lock at line 2169, the code accesses runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size (lines 2170-2178) — all referencing the linked stream's runtime without any lock or refcount protecting its lifetime. A concurrent close() on the linked stream's fd triggers snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private() → snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime). No synchronization prevents kfree(runtime) from completing while the drain path dereferences the stale pointer. Fix by caching the needed runtime fields (no_period_wakeup, rate, buffer_size) into local variables while still holding the stream lock, and using the cached values after the lock is released.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43438
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Remove redundant css_put() in scx_cgroup_init() The iterator css_for_each_descendant_pre() walks the cgroup hierarchy under cgroup_lock(). It does not increment the reference counts on yielded css structs. According to the cgroup documentation, css_put() should only be used to release a reference obtained via css_get() or css_tryget_online(). Since the iterator does not use either of these to acquire a reference, calling css_put() in the error path of scx_cgroup_init() causes a refcount underflow. Remove the unbalanced css_put() to prevent a potential Use-After-Free (UAF) vulnerability.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43439
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as well as tasks queued on cset->mg_tasks, can be skipped by iteration. Fix this by calling css_set_skip_task_iters() before unlinking task->cg_list from cset->tasks. This advances all active iterators to the next task on cset->tasks, so iteration continues correctly even when a task is concurrently being migrated. This race is hard to hit in practice without instrumentation, but it can be reproduced by artificially slowing down cgroup_procs_show(). For example, on an Android device a temporary /sys/kernel/cgroup/cgroup_test knob can be added to inject a delay into cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file. Under this setup, cgroup.procs can intermittently show only PID 101 while skipping PID 103. Once the migration completes, reading the file again shows all tasks as expected. Note that this change does not allow removing the existing css_set_skip_task_iters() call in css_set_move_task(). The new call in cgroup_migrate_add_task() only handles iterators that are racing with migration while the task is still on cset->tasks. Iterators may also start after the task has been moved to cset->mg_tasks. If we dropped css_set_skip_task_iters() from css_set_move_task(), such iterators could keep task_pos pointing to a migrating task, causing css_task_iter_advance() to malfunction on the destination css_set, up to and including crashes or infinite loops. The race window between migration and iteration is very small, and css_task_iter is not on a hot path. In the worst case, when an iterator is positioned on the first thread of the migrating process, cgroup_migrate_add_task() may have to skip multiple tasks via css_set_skip_task_iters(). However, this only happens when migration and iteration actually race, so the performance impact is negligible compared to the correctness fix provided here.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43441
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If bonding ARP/NS validation is enabled, an IPv6 NS/NA packet received on a slave can reach bond_validate_na(), which calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can crash in __ipv6_chk_addr_and_flags(). BUG: kernel NULL pointer dereference, address: 00000000000005d8 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170 Call Trace: ipv6_chk_addr+0x1f/0x30 bond_validate_na+0x12e/0x1d0 [bonding] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] bond_rcv_validate+0x1a0/0x450 [bonding] bond_handle_frame+0x5e/0x290 [bonding] ? srso_alias_return_thunk+0x5/0xfbef5 __netif_receive_skb_core.constprop.0+0x3e8/0xe50 ? srso_alias_return_thunk+0x5/0xfbef5 ? update_cfs_rq_load_avg+0x1a/0x240 ? srso_alias_return_thunk+0x5/0xfbef5 ? __enqueue_entity+0x5e/0x240 __netif_receive_skb_one_core+0x39/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x30/0x200 ? srso_alias_return_thunk+0x5/0xfbef5 net_rx_action+0x338/0x3b0 handle_softirqs+0xc9/0x2a0 do_softirq+0x42/0x60 __local_bh_enable_ip+0x62/0x70 __dev_queue_xmit+0x2d3/0x1000 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? packet_parse_headers+0x10a/0x1a0 packet_sendmsg+0x10da/0x1700 ? kick_pool+0x5f/0x140 ? srso_alias_return_thunk+0x5/0xfbef5 ? __queue_work+0x12d/0x4f0 __sys_sendto+0x1f3/0x220 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x101/0xf80 ? exc_page_fault+0x6e/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate() and avoid the path to ipv6_chk_addr().

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43444
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unreserve bo if queue update failed Error handling path should unreserve bo then return failed. (cherry picked from commit c24afed7de9ecce341825d8ab55a43a254348b33)

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43445
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43447
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: iavf: fix PTP use-after-free during reset Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a worker to cache PHC time, but failed to stop it during reset or disable. This creates a race condition where `iavf_reset_task()` or `iavf_disable_vf()` free adapter resources (AQ) while the worker is still running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it accesses freed memory/locks, leading to a crash. Fix this by calling `iavf_ptp_release()` before tearing down the adapter. This ensures `ptp_clock_unregister()` synchronously cancels the worker and cleans up the chardev before the backing resources are destroyed.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43448
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix race bug in nvme_poll_irqdisable() In the following scenario, pdev can be disabled between (1) and (3) by (2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2). This causes IRQ warning because it tries to enable INTx IRQ that has never been disabled before. To fix this, save IRQ number into a local variable and ensure disable_irq() and enable_irq() operate on the same IRQ number. Even if pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and enable_irq() on a stale IRQ number is still valid and safe, and the depth accounting reamins balanced. task 1: nvme_poll_irqdisable() disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1) enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3) task 2: nvme_reset_work() nvme_dev_disable() pdev->msix_enable = 0; ...(2) crash log: ------------[ cut here ]------------ Unbalanced enable for IRQ 10 WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26 Modules linked in: CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753 Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9 RSP: 0018:ffffc900001bf550 EFLAGS: 00010046 RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90 RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0 RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000 R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293 FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0 Call Trace: enable_irq+0x121/0x1e0 kernel/irq/manage.c:797 nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494 nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744 blk_mq_rq_timed_out block/blk-mq.c:1653 [inline] blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721 bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292 __sbitmap_for_each_set include/linux/sbitmap.h:269 [inline] sbitmap_for_each_set include/linux/sbitmap.h:290 [inline] bt_for_each block/blk-mq-tag.c:324 [inline] blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536 blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 irq event stamp: 74478 hardirqs last enabled at (74477): [] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline] hardirqs last enabled at (74477): [] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202 hardirqs last disabled at (74478): [] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (74478): [] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162 softirqs last enabled at (74304): [] __do_softirq kernel/softirq.c:656 [inline] softirqs last enabled at (74304): [] invoke_softirq kernel/softirq.c:496 [inline] softirqs last enabled at (74304): [] __irq_exit_rcu+0xdc/0x120 ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43449
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff) page_type: f5(slab) raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 000fffffc0000040 ffff888001042000 00000 ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43450
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43451
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue entry from the queue data structures, taking ownership of the entry. For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN present but NFQA_VLAN_TCI missing), the function returns immediately without freeing the dequeued entry or its sk_buff. This leaks the nf_queue_entry, its associated sk_buff, and all held references (net_device refcounts, struct net refcount). Repeated triggering exhausts kernel memory. Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict on the error path, consistent with other error handling in this file.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43452
HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: guard option walkers against 1-byte tail reads When the last byte of options is a non-single-byte option kind, walkers that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end of the option area. Add an explicit i == optlen - 1 check before dereferencing op[i + 1] in xt_tcpudp and xt_dccp option walkers.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 8.2
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H
References
CVE-2026-43453
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid the out-of-bounds read.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-43454
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43455
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB references were acquired, but only the final key->dev value is tracked for release. One reference can be lost, causing a resource leak as mctp_dev_release_key() would only decrease the reference on one dev. Fix by taking key->lock around the key->dev check and mctp_dev_set_key() call.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43456
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bonding: fix type confusion in bond_setup_by_slave() kernel BUG at net/core/skbuff.c:2306! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306 RSP: 0018:ffffc90004aff760 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900 RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780 R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0 Call Trace: ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa54/0xc30 net/socket.c:2592 ___sys_sendmsg+0x190/0x1e0 net/socket.c:2646 __sys_sendmsg+0x170/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe1a0e6c1a9 When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond, bond_setup_by_slave() directly copies the slave's header_ops to the bond device: bond_dev->header_ops = slave_dev->header_ops; This causes a type confusion when dev_hard_header() is later called on the bond device. Functions like ipgre_header(), ip6gre_header(),all use netdev_priv(dev) to access their device-specific private data. When called with the bond device, netdev_priv() returns the bond's private data (struct bonding) instead of the expected type (e.g. struct ip_tunnel), leading to garbage values being read and kernel crashes. Fix this by introducing bond_header_ops with wrapper functions that delegate to the active slave's header_ops using the slave's own device. This ensures netdev_priv() in the slave's header functions always receives the correct device. The fix is placed in the bonding driver rather than individual device drivers, as the root cause is bond blindly inheriting header_ops from the slave without considering that these callbacks expect a specific netdev_priv() layout. The type confusion can be observed by adding a printk in ipgre_header() and running the following commands: ip link add dummy0 type dummy ip addr add 10.0.0.1/24 dev dummy0 ip link set dummy0 up ip link add gre1 type gre local 10.0.0.1 ip link add bond1 type bond mode active-backup ip link set gre1 master bond1 ip link set gre1 up ip link set bond1 up ip addr add fe80::1/64 dev bond1

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43457
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: mctp: i2c: fix skb memory leak in receive path When 'midev->allow_rx' is false, the newly allocated skb isn't consumed by netif_rx(), it needs to free the skb directly.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43458
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: serial: caif: hold tty->link reference in ldisc_open and ser_release A reproducer triggers a KASAN slab-use-after-free in pty_write_room() when caif_serial's TX path calls tty_write_room(). The faulting access is on tty->link->port. Hold an extra kref on tty->link for the lifetime of the caif_serial line discipline: get it in ldisc_open() and drop it in ser_release(), and also drop it on the ldisc_open() error path. With this change applied, the reproducer no longer triggers the UAF in my testing.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43459
HIGH7.3

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: flush delayed work before removing DAIs and widgets When a sound card is unbound while a PCM stream is open, a use-after-free can occur in snd_soc_dapm_stream_event(), called from the close_delayed_work workqueue handler. During unbind, snd_soc_unbind_card() flushes delayed work and then calls soc_cleanup_card_resources(). Inside cleanup, snd_card_disconnect_sync() releases all PCM file descriptors, and the resulting PCM close path can call snd_soc_dapm_stream_stop() which schedules new delayed work with a pmdown_time timer delay. Since this happens after the flush in snd_soc_unbind_card(), the new work is not caught. soc_remove_link_components() then frees DAPM widgets before this work fires, leading to the use-after-free. The existing flush in soc_free_pcm_runtime() also cannot help as it runs after soc_remove_link_components() has already freed the widgets. Add a flush in soc_cleanup_card_resources() after snd_card_disconnect_sync() (after which no new PCM closes can schedule further delayed work) and before soc_remove_link_dais() and soc_remove_link_components() (which tear down the structures the delayed work accesses).

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H
References
CVE-2026-43460
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix double-free in remove() callback The driver uses devm_spi_register_controller() for registration, which automatically unregisters the controller via devm cleanup when the device is removed. The manual call to spi_unregister_controller() in the remove() callback can lead to a double-free. And to make sure controller is unregistered before DMA buffer is unmapped, switch to use spi_register_controller() in probe().

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43461
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43462
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net: spacemit: Fix error handling in emac_tx_mem_map() The DMA mappings were leaked on mapping error. Free them with the existing emac_free_tx_buf() function.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43463
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer() rxrpc_kernel_lookup_peer() can also return error pointers in addition to NULL, so just checking for NULL is not sufficient. Fix this by: (1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL on allocation failure. (2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the error code returned.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43464
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43465
CRITICAL9.8

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first fragment which is the page mentioned above. - The XDP program runs and calls bpf_xdp_pull_data() which moves the header into the linear part of the XDP buffer. As the packet doesn't contain more data, the program drops the tail fragment since it no longer contains any payload (pp_ref_count=63). - mlx5 device skips counting this fragment. Internal frag counter remains 0. - mlx5 releases all 64 fragments of the page but page pp_ref_count is 63 => negative reference counting error. Resulting splat during the test: WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] Modules linked in: [...] CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] [...] Call Trace: mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core] mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core] mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core] mlx5e_close_rq+0x78/0xa0 [mlx5_core] mlx5e_close_queues+0x46/0x2a0 [mlx5_core] mlx5e_close_channel+0x24/0x90 [mlx5_core] mlx5e_close_channels+0x5d/0xf0 [mlx5_core] mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core] mlx5e_change_mtu+0x11d/0x490 [mlx5_core] mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core] netif_set_mtu_ext+0xfc/0x240 do_setlink.isra.0+0x226/0x1100 rtnl_newlink+0x7a9/0xba0 rtnetlink_rcv_msg+0x220/0x3c0 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x240 ___sys_sendmsg+0x7c/0xb0 [...] __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xc70 The problem applies for XDP_PASS as well which is handled in a different code path in the driver. This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xCRITICAL 9.8
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-43466
HIGH8.2

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 asm_common_interrupt+0x22/0x40

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 8.2
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H
References
CVE-2026-43467
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix crash when moving to switchdev mode When moving to switchdev mode when the device doesn't support IPsec, we try to clean up the IPsec resources anyway which causes the crash below, fix that by correctly checking for IPsec support before trying to clean up its resources. [27642.515799] WARNING: arch/x86/mm/fault.c:1276 at do_user_addr_fault+0x18a/0x680, CPU#4: devlink/6490 [27642.517159] Modules linked in: xt_conntrack xt_MASQUERADE ip6table_nat ip6table_filter ip6_tables iptable_nat nf_nat xt_addrtype rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_fwctl nfnetlink zram zsmalloc mlx5_ib fuse rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_core ib_core [27642.521358] CPU: 4 UID: 0 PID: 6490 Comm: devlink Not tainted 6.19.0-rc5_for_upstream_min_debug_2026_01_14_16_47 #1 NONE [27642.522923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [27642.524528] RIP: 0010:do_user_addr_fault+0x18a/0x680 [27642.525362] Code: ff 0f 84 75 03 00 00 48 89 ee 4c 89 e7 e8 5e b9 22 00 49 89 c0 48 85 c0 0f 84 a8 02 00 00 f7 c3 60 80 00 00 74 22 31 c9 eb ae <0f> 0b 48 83 c4 10 48 89 ea 48 89 de 4c 89 f7 5b 5d 41 5c 41 5d 41 [27642.528166] RSP: 0018:ffff88810770f6b8 EFLAGS: 00010046 [27642.529038] RAX: 0000000000000000 RBX: 0000000000000002 RCX: ffff88810b980f00 [27642.530158] RDX: 00000000000000a0 RSI: 0000000000000002 RDI: ffff88810770f728 [27642.531270] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000000 [27642.532383] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888103f3c4c0 [27642.533499] R13: 0000000000000000 R14: ffff88810770f728 R15: 0000000000000000 [27642.534614] FS: 00007f197c741740(0000) GS:ffff88856a94c000(0000) knlGS:0000000000000000 [27642.535915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27642.536858] CR2: 00000000000000a0 CR3: 000000011334c003 CR4: 0000000000172eb0 [27642.537982] Call Trace: [27642.538466] [27642.538907] exc_page_fault+0x76/0x140 [27642.539583] asm_exc_page_fault+0x22/0x30 [27642.540282] RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30 [27642.541134] Code: 07 85 c0 75 11 ba ff 00 00 00 f0 0f b1 17 75 06 b8 01 00 00 00 c3 31 c0 c3 90 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00 00 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 7e 02 00 00 48 89 d8 5b [27642.543936] RSP: 0018:ffff88810770f7d8 EFLAGS: 00010046 [27642.544803] RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffff888113ad96d8 [27642.545916] RDX: 0000000000000001 RSI: ffff88810770f818 RDI: 00000000000000a0 [27642.547027] RBP: 0000000000000098 R08: 0000000000000400 R09: ffff88810b980f00 [27642.548140] R10: 0000000000000001 R11: ffff888101845a80 R12: 00000000000000a8 [27642.549263] R13: ffffffffa02a9060 R14: 00000000000000a0 R15: ffff8881130d8a40 [27642.550379] complete_all+0x20/0x90 [27642.551010] mlx5e_ipsec_disable_events+0xb6/0xf0 [mlx5_core] [27642.552022] mlx5e_nic_disable+0x12d/0x220 [mlx5_core] [27642.552929] mlx5e_detach_netdev+0x66/0xf0 [mlx5_core] [27642.553822] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core] [27642.554821] mlx5e_vport_rep_load+0x419/0x590 [mlx5_core] [27642.555757] ? xa_load+0x53/0x90 [27642.556361] __esw_offloads_load_rep+0x54/0x70 [mlx5_core] [27642.557328] mlx5_esw_offloads_rep_load+0x45/0xd0 [mlx5_core] [27642.558320] esw_offloads_enable+0xb4b/0xc90 [mlx5_core] [27642.559247] mlx5_eswitch_enable_locked+0x34e/0x4f0 [mlx5_core] [27642.560257] ? mlx5_rescan_drivers_locked+0x222/0x2d0 [mlx5_core] [27642.561284] mlx5_devlink_eswitch_mode_set+0x5ac/0x9c0 [mlx5_core] [27642.562334] ? devlink_rate_set_ops_supported+0x21/0x3a0 [27642.563220] devlink_nl_eswitch_set_doit+0x67/0xe0 [27642.564026] genl_family_rcv_msg_doit+0xe0/0x130 [27642.564816] genl_rcv_msg+0x183/0x290 [27642.565466] ? __devlink_nl_pre_doit.isra.0+0x160/0x160 [27642.566329] ? d ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43468
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix deadlock between devlink lock and esw->wq esw->work_queue executes esw_functions_changed_event_handler -> esw_vfs_changed_event_handler and acquires the devlink lock. .eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) -> mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked -> mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlocks when esw_vfs_changed_event_handler executes. Fix that by no longer flushing the work to avoid the deadlock, and using a generation counter to keep track of work relevance. This avoids an old handler manipulating an esw that has undergone one or more mode changes: - the counter is incremented in mlx5_eswitch_event_handler_unregister. - the counter is read and passed to the ephemeral mlx5_host_work struct. - the work handler takes the devlink lock and bails out if the current generation is different than the one it was scheduled to operate on. - mlx5_eswitch_cleanup does the final draining before destroying the wq. No longer flushing the workqueue has the side effect of maybe no longer cancelling pending vport_change_handler work items, but that's ok since those are disabled elsewhere: - mlx5_eswitch_disable_locked disables the vport eq notifier. - mlx5_esw_vport_disable disarms the HW EQ notification and marks vport->enabled under state_lock to false to prevent pending vport handler from doing anything. - mlx5_eswitch_cleanup destroys the workqueue and makes sure all events are disabled/finished.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43469
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decrement re_receiving on the early exit paths In the event that rpcrdma_post_recvs() fails to create a work request (due to memory allocation failure, say) or otherwise exits early, we should decrement ep->re_receiving before returning. Otherwise we will hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and the completion will never be triggered. On a system with high memory pressure, this can appear as the following hung task: INFO: task kworker/u385:17:8393 blocked for more than 122 seconds. Tainted: G S E 6.19.0 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000 Workqueue: xprtiod xprt_autoclose [sunrpc] Call Trace: __schedule+0x48b/0x18b0 ? ib_post_send_mad+0x247/0xae0 [ib_core] schedule+0x27/0xf0 schedule_timeout+0x104/0x110 __wait_for_common+0x98/0x180 ? __pfx_schedule_timeout+0x10/0x10 wait_for_completion+0x24/0x40 rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma] xprt_rdma_close+0x12/0x40 [rpcrdma] xprt_autoclose+0x5f/0x120 [sunrpc] process_one_work+0x191/0x3e0 worker_thread+0x2e3/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x10d/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x273/0x2b0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43470
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfs: return EISDIR on nfs3_proc_create if d_alias is a dir If we found an alias through nfs3_do_create/nfs_add_or_obtain /d_splice_alias which happens to be a dir dentry, we don't return any error, and simply forget about this alias, but the original dentry we were adding and passed as parameter remains negative. This later causes an oops on nfs_atomic_open_v23/finish_open since we supply a negative dentry to do_dentry_open. This has been observed running lustre-racer, where dirs and files are created/removed concurrently with the same name and O_EXCL is not used to open files (frequent file redirection). While d_splice_alias typically returns a directory alias or NULL, we explicitly check d_is_dir() to ensure that we don't attempt to perform file operations (like finish_open) on a directory inode, which triggers the observed oops.

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43471
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace() The kernel log indicates a crash in ufshcd_add_command_trace, due to a NULL pointer dereference when accessing hwq->id. This can happen if ufshcd_mcq_req_to_hwq() returns NULL. This patch adds a NULL check for hwq before accessing its id field to prevent a kernel crash. Kernel log excerpt: [] notify_die+0x4c/0x8c [] __die+0x60/0xb0 [] die+0x4c/0xe0 [] die_kernel_fault+0x74/0x88 [] __do_kernel_fault+0x314/0x318 [] do_page_fault+0xa4/0x5f8 [] do_translation_fault+0x34/0x54 [] do_mem_abort+0x50/0xa8 [] el1_abort+0x3c/0x64 [] el1h_64_sync_handler+0x44/0xcc [] el1h_64_sync+0x80/0x88 [] ufshcd_add_command_trace+0x23c/0x320 [] ufshcd_compl_one_cqe+0xa4/0x404 [] ufshcd_mcq_poll_cqe_lock+0xac/0x104 [] ufs_mtk_mcq_intr+0x54/0x74 [ufs_mediatek_mod] [] __handle_irq_event_percpu+0xc8/0x348 [] handle_irq_event+0x3c/0xa8 [] handle_fasteoi_irq+0xf8/0x294 [] generic_handle_domain_irq+0x54/0x80 [] gic_handle_irq+0x1d4/0x330 [] call_on_irq_stack+0x44/0x68 [] do_interrupt_handler+0x78/0xd8 [] el1_interrupt+0x48/0xa8 [] el1h_64_irq_handler+0x14/0x24 [] el1h_64_irq+0x80/0x88 [] arch_local_irq_enable+0x4/0x1c [] cpuidle_enter+0x34/0x54 [] do_idle+0x1dc/0x2f8 [] cpu_startup_entry+0x30/0x3c [] secondary_start_kernel+0x134/0x1ac [] __secondary_switched+0xc4/0xcc

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43472
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: unshare: fix unshare_fs() handling There's an unpleasant corner case in unshare(2), when we have a CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that case copy_mnt_ns() gets passed current->fs instead of a private copy, which causes interesting warts in proof of correctness] > I guess if private means fs->users == 1, the condition could still be true. Unfortunately, it's worse than just a convoluted proof of correctness. Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS (and current->fs->users == 1). We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and flips current->fs->{pwd,root} to corresponding locations in the new namespace. Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM). We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's destroyed and its mount tree is dissolved, but... current->fs->root and current->fs->pwd are both left pointing to now detached mounts. They are pinning those, so it's not a UAF, but it leaves the calling process with unshare(2) failing with -ENOMEM _and_ leaving it with pwd and root on detached isolated mounts. The last part is clearly a bug. There is other fun related to that mess (races with pivot_root(), including the one between pivot_root() and fork(), of all things), but this one is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new fs_struct even if it hadn't been shared in the first place". Sure, we could go for something like "if both CLONE_NEWNS *and* one of the things that might end up failing after copy_mnt_ns() call in create_new_namespaces() are set, force allocation of new fs_struct", but let's keep it simple - the cost of copy_fs_struct() is trivial. Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets a freshly allocated fs_struct, yet to be attached to anything. That seriously simplifies the analysis... FWIW, that bug had been there since the introduction of unshare(2) ;-/

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43473
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Add NULL checks when resetting request and reply queues The driver encountered a crash during resource cleanup when the reply and request queues were NULL due to freed memory. This issue occurred when the creation of reply or request queues failed, and the driver freed the memory first, but attempted to mem set the content of the freed memory, leading to a system crash. Add NULL pointer checks for reply and request queues before accessing the reply/request memory during cleanup

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43474
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fs: init flags_valid before calling vfs_fileattr_get syzbot reported a uninit-value bug in [1]. Similar to the "*get" context where the kernel's internal file_kattr structure is initialized before calling vfs_fileattr_get(), we should use the same mechanism when using fa. [1] BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 vfs_fileattr_get fs/file_attr.c:94 [inline] __do_sys_file_getattr fs/file_attr.c:416 [inline] Local variable fa.i created at: __do_sys_file_getattr fs/file_attr.c:380 [inline] __se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-43475
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT This resolves the follow splat and lock-up when running with PREEMPT_RT enabled on Hyper-V: [ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002 [ 415.140822] INFO: lockdep is turned off. [ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common [ 415.140846] Preemption disabled at: [ 415.140847] [] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)} [ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024 [ 415.140857] Call Trace: [ 415.140861] [ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140863] dump_stack_lvl+0x91/0xb0 [ 415.140870] __schedule_bug+0x9c/0xc0 [ 415.140875] __schedule+0xdf6/0x1300 [ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980 [ 415.140879] ? rcu_is_watching+0x12/0x60 [ 415.140883] schedule_rtlock+0x21/0x40 [ 415.140885] rtlock_slowlock_locked+0x502/0x1980 [ 415.140891] rt_spin_lock+0x89/0x1e0 [ 415.140893] hv_ringbuffer_write+0x87/0x2a0 [ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0 [ 415.140900] ? rcu_is_watching+0x12/0x60 [ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc] [ 415.140904] ? HARDIRQ_verbose+0x10/0x10 [ 415.140908] ? __rq_qos_issue+0x28/0x40 [ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod] [ 415.140926] __blk_mq_issue_directly+0x4a/0xc0 [ 415.140928] blk_mq_issue_direct+0x87/0x2b0 [ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440 [ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0 [ 415.140935] __blk_flush_plug+0xf4/0x150 [ 415.140940] __submit_bio+0x2b2/0x5c0 [ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360 [ 415.140946] submit_bio_noacct_nocheck+0x272/0x360 [ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4] [ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4] [ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4] [ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4] [ 415.141060] generic_perform_write+0x14e/0x2c0 [ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4] [ 415.141083] vfs_write+0x2ca/0x570 [ 415.141087] ksys_write+0x76/0xf0 [ 415.141089] do_syscall_64+0x99/0x1490 [ 415.141093] ? rcu_is_watching+0x12/0x60 [ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0 [ 415.141097] ? rcu_is_watching+0x12/0x60 [ 415.141098] ? lock_release+0x1f0/0x2a0 [ 415.141100] ? rcu_is_watching+0x12/0x60 [ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0 [ 415.141103] ? rcu_is_watching+0x12/0x60 [ 415.141104] ? __schedule+0xb34/0x1300 [ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170 [ 415.141109] ? do_nanosleep+0x8b/0x160 [ 415.141111] ? hrtimer_nanosleep+0x89/0x100 [ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 415.141116] ? xfd_validate_state+0x26/0x90 [ 415.141118] ? rcu_is_watching+0x12/0x60 [ 415.141120] ? do_syscall_64+0x1e0/0x1490 [ 415.141121] ? do_syscall_64+0x1e0/0x1490 [ 415.141123] ? rcu_is_watching+0x12/0x60 [ 415.141124] ? do_syscall_64+0x1e0/0x1490 [ 415.141125] ? do_syscall_64+0x1e0/0x1490 [ 415.141127] ? irqentry_exit+0x140/0 ---truncated---

Published: 2026-05-08Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45944
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down context entry When tearing down a context entry, the current implementation zeros the entire 128-bit entry using multiple 64-bit writes. This creates a window where the hardware can fetch a "torn" entry — where some fields are already zeroed while the 'Present' bit is still set — leading to unpredictable behavior or spurious faults. While x86 provides strong write ordering, the compiler may reorder writes to the two 64-bit halves of the context entry. Even without compiler reordering, the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Align with the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the context entry first to signal the transition of ownership from hardware to software. 2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU. 3. Perform the required cache and context-cache invalidation to ensure hardware no longer has cached references to the entry. 4. Fully zero out the entry only after the invalidation is complete. Also, add a dma_wmb() to context_set_present() to ensure the entry is fully initialized before the 'Present' bit becomes visible.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
References
CVE-2026-45946
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: power: supply: ab8500: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding") introduced this issue during a refactorization. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45947
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc() In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM, the function returns directly without releasing the allocated xcc_info, resulting in a memory leak. Fix this by ensuring that xcc_info is properly freed in the error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45948
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_ext_shift_extents() In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the function returns immediately without releasing the path obtained via ext4_find_extent(), leading to a memory leak. Fix this by jumping to the out label to ensure the path is properly released.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45949
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45950
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req() The starfive_aes_aead_do_one_req() function allocates rctx->adata with kzalloc() but fails to free it if sg_copy_to_buffer() or starfive_aes_hw_init() fails, which lead to memory leaks. Since rctx->adata is unconditionally freed after the write_adata operations, ensure consistent cleanup by freeing the allocation in these earlier error paths as well. Compile tested only. Issue found using a prototype static analysis tool and code review.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45951
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a potential use-after-free of BTF object Refcounting in the check_pseudo_btf_id() function is incorrect: the __check_pseudo_btf_id() function might get called with a zero refcounted btf. Fix this, and patch related code accordingly. v3: rephrase a comment (AI) v2: fix a refcount leak introduced in v1 (AI)

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45952
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Add validation for MTU changes Increasing the MTU beyond the HDS threshold causes the hardware to fragment packets across multiple buffers. If a single-buffer XDP program is attached, the driver will drop all multi-frag frames. While we can't prevent a remote sender from sending non-TCP packets larger than the MTU, this will prevent users from inadvertently breaking new TCP streams. Traditionally, drivers supported XDP with MTU less than 4Kb (packet per page). Fbnic currently prevents attaching XDP when MTU is too high. But it does not prevent increasing MTU after XDP is attached.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45953
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix IO hang with degraded array with llbitmap When llbitmap bit state is still unwritten, any new write should force rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying(). However, later the same check is missing in need_this_block(), causing stripe to deadloop during handling because handle_stripe() will decide to go to handle_stripe_fill(), meanwhile need_this_block() always return 0 and nothing is handled.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45954
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe() In au1200fb_drv_probe(), when platform_get_irq fails(), it directly returns from the function with an error code, which causes a memory leak. Replace it with a goto label to ensure proper cleanup.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45955
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout When llbitmap_suspend_timeout() times out waiting for percpu_ref to become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref. The caller (md_llbitmap_daemon_fn) then continues to the next page without calling llbitmap_resume(), leaving the percpu_ref in a killed state permanently. Fix this by resurrecting the percpu_ref before returning the error, ensuring the page control structure remains usable for subsequent operations.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H
References
CVE-2026-45956
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45957
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: rcu: Fix rcu_read_unlock() deadloop due to softirq Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()") removes the recursion-protection code from __rcu_read_unlock(). Therefore, we could invoke the deadloop in raise_softirq_irqoff() with ftrace enabled as follows: WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180 Modules linked in: my_irq_work(O) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180 RSP: 0018:ffffc900000034a8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329 RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000 R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054 FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 __is_insn_slot_addr+0x54/0x70 kernel_text_address+0x48/0xc0 __kernel_text_address+0xd/0x40 unwind_get_return_address+0x1e/0x40 arch_stack_walk+0x9c/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 __raise_softirq_irqoff+0x61/0x80 __flush_smp_call_function_queue+0x115/0x420 __sysvec_call_function_single+0x17/0xb0 sysvec_call_function_single+0x8c/0xc0 Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work") fixed the infinite loop in rcu_read_unlock_special() for IRQ work by setting a flag before calling irq_work_queue_on(). We fix this issue by setting the same flag before calling raise_softirq_irqoff() and rename the flag to defer_qs_pending for more common.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-45958
HIGH7.1

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.1
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H
References
CVE-2026-45959
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree Annotating a local pointer variable, which will be assigned with the kmalloc-family functions, with the `__cleanup(kfree)` attribute will make the address of the local variable, rather than the address returned by kmalloc, passed to kfree directly and lead to a crash due to invalid deallocation of stack address. According to other places in the repo, the correct usage should be `__free(kfree)`. The code coincidentally compiled because the parameter type `void *` of kfree is compatible with the desired type `struct { ... } **`.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45960
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45962
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45964
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done in gss_release_msg(), but forgot to add a corresponding kref_put() on the error path when kstrdup_const() fails. If service_name is non-NULL and kstrdup_const() fails, the function jumps to err_put_pipe_version which calls put_pipe_version() and kfree(gss_msg), but never releases the gss_auth reference. This leads to a kref leak where the gss_auth structure is never freed. Add a forward declaration for gss_free_callback() and call kref_put() in the err_put_pipe_version error path to properly release the reference taken earlier.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45965
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix invalid deref of rawdata when export_binary is unset If the export_binary parameter is disabled on runtime, profiles that were loaded before that will still have their rawdata stored in apparmorfs, with a symbolic link to the rawdata on the policy directory. When one of those profiles are replaced, the rawdata is set to NULL, but when trying to resolve the symbolic links to rawdata for that profile, it will try to dereference profile->rawdata->name when profile->rawdata is now NULL causing an oops. Fix it by checking if rawdata is set. [ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088 [ 168.657420] #PF: supervisor read access in kernel mode [ 168.660619] #PF: error_code(0x0000) - not-present page [ 168.663613] PGD 0 P4D 0 [ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI [ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary) [ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330 [ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8 [ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282 [ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158 [ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80 [ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000 [ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80 [ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0 [ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000 [ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0 [ 168.701696] Call Trace: [ 168.702325] [ 168.702995] rawdata_get_link_data+0x1c/0x30 [ 168.704145] vfs_readlink+0xd4/0x160 [ 168.705152] do_readlinkat+0x114/0x180 [ 168.706214] __x64_sys_readlink+0x1e/0x30 [ 168.708653] x64_sys_call+0x1d77/0x26b0 [ 168.709525] do_syscall_64+0x81/0x500 [ 168.710348] ? do_statx+0x72/0xb0 [ 168.711109] ? putname+0x3e/0x80 [ 168.711845] ? __x64_sys_statx+0xb7/0x100 [ 168.712711] ? x64_sys_call+0x10fc/0x26b0 [ 168.713577] ? do_syscall_64+0xbf/0x500 [ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0 [ 168.715404] ? irqentry_exit+0xb2/0x740 [ 168.716359] ? exc_page_fault+0x90/0x1b0 [ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45966
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in __unix_needs_revalidation When receiving file descriptors via SCM_RIGHTS, both the socket pointer and the socket's sk pointer can be NULL during socket setup or teardown, causing NULL pointer dereferences in __unix_needs_revalidation(). This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new __unix_needs_revalidation() function was added without proper NULL checks. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0x0000000000000018 RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0) Call Trace: apparmor_file_receive+0x42/0x80 security_file_receive+0x2e/0x50 receive_fd+0x1d/0xf0 scm_detach_fds+0xad/0x1c0 The function dereferences sock->sk->sk_family without checking if either sock or sock->sk is NULL first. Add NULL checks for both sock and sock->sk before accessing sk_family.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45968
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: cpuidle: Skip governor when only one idle state is available On certain platforms (PowerNV systems without a power-mgt DT node), cpuidle may register only a single idle state. In cases where that single state is a polling state (state 0), the ladder governor may incorrectly treat state 1 as the first usable state and pass an out-of-bounds index. This can lead to a NULL enter callback being invoked, ultimately resulting in a system crash. [ 13.342636] cpuidle-powernv : Only Snooze is available [ 13.351854] Faulting instruction address: 0x00000000 [ 13.376489] NIP [0000000000000000] 0x0 [ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668 Fix this by adding a bail-out in cpuidle_select() that returns state 0 directly when state_count <= 1, bypassing the governor and keeping the tick running.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45969
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Add missing check for input_ff_create_memless The ps_gamepad_create() function calls input_ff_create_memless() without verifying its return value, which can lead to incorrect behavior or potential crashes when FF effects are triggered. Add a check for the return value of input_ff_create_memless().

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45970
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix UAF in rlb_arp_recv during bond up/down The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN. However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag. [ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI [ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] [ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary) [ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022 [ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding] [ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00 [ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206 [ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e [ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8 [ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8 [ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119 [ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810 [ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000 [ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0 [ 214.310347] Call Trace: [ 214.313070] [ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding] [ 214.320975] bond_handle_frame+0x166/0xb60 [bonding] [ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] [ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710 [ 214.339199] ? __pfx_arp_process+0x10/0x10 [ 214.343775] ? sched_balance_find_src_group+0x98/0x630 [ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10 [ 214.356513] ? arp_rcv+0x307/0x690 [ 214.360311] ? __pfx_arp_rcv+0x10/0x10 [ 214.364499] ? __lock_acquire+0x58c/0xbd0 [ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0 [ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 214.380743] ? lock_acquire+0x10b/0x140 [ 214.385026] process_backlog+0x3f1/0x13a0 [ 214.389502] ? process_backlog+0x3aa/0x13a0 [ 214.394174] __napi_poll.constprop.0+0x9f/0x370 [ 214.399233] net_rx_action+0x8c1/0xe60 [ 214.403423] ? __pfx_net_rx_action+0x10/0x10 [ 214.408193] ? lock_acquire.part.0+0xbd/0x260 [ 214.413058] ? sched_clock_cpu+0x6c/0x540 [ 214.417540] ? mark_held_locks+0x40/0x70 [ 214.421920] handle_softirqs+0x1fd/0x860 [ 214.426302] ? __pfx_handle_softirqs+0x10/0x10 [ 214.431264] ? __neigh_event_send+0x2d6/0xf50 [ 214.436131] do_softirq+0xb1/0xf0 [ 214.439830] The issue is reproducible by repeatedly running ip link set bond0 up/down while receiving ARP messages, where rlb_arp_recv() can race with rlb_deinitialize() and dereference a freed rx_hashtbl entry. Fix this by setting recv_probe to NULL and then calling synchronize_net() to wait for any concurrent RX processing to finish. This ensures that no RX handler can access rx_hashtbl after it is freed in bond_alb_deinitialize().

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45971
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc).

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45973
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45974
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found If btrfs_search_slot_for_read() returns 1, it means we did not find any key greater than or equals to the key we asked for, meaning we have reached the end of the tree and therefore the path is not valid. If this happens we need to break out of the loop and stop, instead of continuing and accessing an invalid path.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45976
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_ras_init() When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function returns directly without freeing the allocated con structure, leading to a memory leak. Fix this by jumping to the release_con label to properly clean up the allocated memory before returning the error code. Compile tested only. Issue found using a prototype static analysis tool and code review.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45977
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: fbnic: close fw_log race between users and teardown Fixes a theoretical race on fw_log between the teardown path and fw_log write functions. fw_log is written inside fbnic_fw_log_write() and can be reached from the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before IRQ/MBX teardown during cleanup, resulting in a potential data race of dereferencing a freed/null variable. Possible Interleaving Scenario: CPU0: fbnic_fw_msix_intr() // Entry fbnic_fw_log_write() if (fbnic_fw_log_ready()) // true ... preempt ... CPU1: fbnic_remove() // Entry fbnic_fw_log_free() vfree(log->data_start); log->data_start = NULL; CPU0: continues, walks log->entries or writes to log->data_start The initialization also has an incorrect order problem, as the fw_log is currently allocated after MBX setup during initialization. Fix the problems by adjusting the synchronization order to put initialization in place before the mailbox is enabled, and not cleared until after the mailbox has been disabled.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45978
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: staging: greybus: lights: avoid NULL deref gb_lights_light_config() stores channel_count before allocating the channels array. If kcalloc() fails, gb_lights_release() iterates the non-zero count and dereferences light->channels, which is NULL. Allocate channels first and only then publish channels_count so the cleanup path can't walk a NULL pointer.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45980
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Stop job scheduling across aie2_release_resource() Running jobs on a hardware context while it is in the process of releasing resources can lead to use-after-free and crashes. Fix this by stopping job scheduling before calling aie2_release_resource() and restarting it after the release completes. Additionally, aie2_sched_job_run() now checks whether the hardware context is still active.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45981
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: s390/cio: Fix device lifecycle handling in css_alloc_subchannel() `css_alloc_subchannel()` calls `device_initialize()` before setting up the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails, the error path frees the subchannel structure directly, bypassing the device model reference counting. Once `device_initialize()` has been called, the embedded struct device must be released via `put_device()`, allowing the release callback to free the container structure. Fix the error path by dropping the initial device reference with `put_device()` instead of calling `kfree()` directly. This ensures correct device lifetime handling and avoids potential use-after-free or double-free issues.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45982
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch() Cover a missed execution path with a new check.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45983
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nfsd: never defer requests during idmap lookup During v4 request compound arg decoding, some ops (e.g. SETATTR) can trigger idmap lookup upcalls. When those upcall responses get delayed beyond the allowed time limit, cache_check() will mark the request for deferral and cause it to be dropped. This prevents nfs4svc_encode_compoundres from being executed, and thus the session slot flag NFSD4_SLOT_INUSE never gets cleared. Subsequent client requests will fail with NFSERR_JUKEBOX, given that the slot will be marked as in-use, making the SEQUENCE op fail. Fix this by making sure that the RQ_USEDEFERRAL flag is always clear during nfs4svc_decode_compoundargs(), since no v4 request should ever be deferred.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-45984
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-45985
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O When allocating blocks during within-EOF DIO and writeback with dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was set when calling ext4_split_convert_extents(), which may potentially result in stale data issues. Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, ext4_iomap_alloc() call ext4_map_blocks() with EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the above flags set. Then, ext4_split_convert_extents() calls ext4_split_extent() with EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2 flags set, and it calls ext4_split_extent_at() to split the second half with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at() failed to insert extent since a temporary lack -ENOSPC. It zeroes out the first half but convert the entire on-disk extent to written since the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten in the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status tree Finally, if the DIO failed to write data to the disk, the stale data in the second half will be exposed once the cached extent entry is gone. Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting an unwritten extent before submitting I/O, and make ext4_split_convert_extents() to zero out the entire extent range to zero for this case, and also mark the extent in the extent status tree for consistency.

Published: 2026-05-27Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46246
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `extcon` handle, means that the `extcon` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `extcon` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `extcon_set_state_sync()` with a freed `extcon` handle. Which usually crashes the system or otherwise silently corrupts the memory... Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `extcon` handle.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46247
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gfx3d: add parent to parent request map After commit d228ece36345 ("clk: divider: remove round_rate() in favor of determine_rate()") determining GFX3D clock rate crashes, because the passed parent map doesn't provide the expected best_parent_hw clock (with the roundd_rate path before the offending commit the best_parent_hw was ignored). Set the field in parent_req in addition to setting it in the req, fixing the crash. clk_hw_round_rate (drivers/clk/clk.c:1764) (P) clk_divider_bestdiv (drivers/clk/clk-divider.c:336) divider_determine_rate (drivers/clk/clk-divider.c:358) clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) __clk_determine_rate (drivers/clk/clk.c:1741) clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) clk_core_round_rate_nolock (drivers/clk/clk.c:1710) clk_round_rate (drivers/clk/clk.c:1804) dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1)) msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51) devfreq_set_target (drivers/devfreq/devfreq.c:360) devfreq_update_target (drivers/devfreq/devfreq.c:426) devfreq_monitor (drivers/devfreq/devfreq.c:458) process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284) worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2)) kthread (kernel/kthread.c:467) ret_from_fork (arch/arm64/kernel/entry.S:861)

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46248
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: clear stale link mapping of ahvif->links_map When an arvif is initialized in non-AP STA mode but MLO connection preparation fails before the arvif is created (arvif->is_created remains false), the error path attempts to delete all links. However, link deletion only executes when arvif->is_created is true. As a result, ahvif retains a stale entry of arvif that is initialized but not created. When a new arvif is initialized with the same link id, this stale mapping triggers the following WARN_ON. WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275 Call trace: ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P) drv_change_vif_links+0xbc/0x1a4 [mac80211] ieee80211_vif_update_links+0x54c/0x6a0 [mac80211] ieee80211_vif_set_links+0x40/0x70 [mac80211] ieee80211_prep_connection+0x84/0x450 [mac80211] ieee80211_mgd_auth+0x200/0x480 [mac80211] ieee80211_auth+0x14/0x20 [mac80211] cfg80211_mlme_auth+0x90/0xf0 [cfg80211] nl80211_authenticate+0x32c/0x380 [cfg80211] genl_family_rcv_msg_doit+0xc8/0x134 Fix this issue by unassigning the link vif and clearing ahvif->links_map if arvif is only initialized but not created. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46249
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix PF driver crash with kexec kernel booting During a kexec reboot the hardware is not power-cycled, so AF state from the old kernel can persist into the new kernel. When AF and PF drivers are built as modules, the PF driver may probe before AF reinitializes the hardware. The PF driver treats the RVUM block revision as an indication that AF initialization is complete. If this value is left uncleared at shutdown, PF may incorrectly assume AF is ready and access stale hardware state, leading to a crash. Clear the RVUM block revision during AF shutdown to avoid PF mis-detecting AF readiness after kexec.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46250
HIGH7.3

In the Linux kernel, the following vulnerability has been resolved: MIPS: Work around LLVM bug when gp is used as global register variable On MIPS, __current_thread_info is defined as global register variable locating in $gp, and is simply assigned with new address during kernel relocation. This however is broken with LLVM, which always restores $gp if it finds $gp is clobbered in any form, including when intentionally through a global register variable. This is against GCC's documentation[1], which requires a callee-saved register used as global register variable not to be restored if it's clobbered. As a result, $gp will continue to point to the unrelocated kernel after the epilog of relocate_kernel(), leading to an early crash in init_idle, [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY [ 0.000000] Tainted: [W]=WARN [ 0.000000] Hardware name: loongson,loongson64v-4core-virtio [ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240 [ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001 [ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002 [ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80 [ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80 [ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90 [ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90 [ 0.000000] Hi : 0000000000000000 [ 0.000000] Lo : 0000000000000000 [ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270 [ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270 [ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL [ 0.000000] Cause : 00000008 (ExcCode 02) [ 0.000000] BadVA : 0000000000000000 [ 0.000000] PrId : 00006305 (ICT Loongson-3) [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000) [ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528 [ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000 [ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258 [ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98 [ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [] init_idle+0x130/0x270 [ 0.000000] [] sched_init+0x5c8/0x6c0 [ 0.000000] [] start_kernel+0x27c/0x7a8 This bug has been reported to LLVM[2] and affects version from (at least) 18 to 21. Let's work around this by using inline assembly to assign $gp before a fix is widely available.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.3
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H
References
CVE-2026-46251
HIGH8.4

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix block_group_tree dirty_list corruption When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the block group tree to the switch_commits list before calling switch_commit_roots, as we do for the tree root and the chunk root. However, the block group tree uses normal root dirty tracking and in any transaction that does an allocation and dirties a block group, the block group root will already be linked to a list by the dirty_list field and this use of list_add_tail() is invalid and corrupts the prev/next members of block_group_root->dirty_list. This is apparent on a subsequent list_del on the prev if we enable CONFIG_DEBUG_LIST: [32.1571] ------------[ cut here ]------------ [32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538) [32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607 [32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none) [32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014 [32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120 [32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202 [32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538 [32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00 [32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff [32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538 [32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538 [32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000 [32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0 [32.1609] Call Trace: [32.1610] [32.1611] switch_commit_roots+0x82/0x1d0 [btrfs] [32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs] [32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs] [32.1621] __iterate_supers+0xe8/0x190 [32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10 [32.1623] ksys_sync+0x63/0xb0 [32.1624] __do_sys_sync+0xe/0x20 [32.1625] do_syscall_64+0x73/0x450 [32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e [32.1627] RIP: 0033:0x7f0c28d05d2b [32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2 [32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b [32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d [32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000 [32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80 [32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034 [32.1643] [32.1644] irq event stamp: 0 [32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [32.1646] hardirqs last disabled at (0): []copy_process+0xb37/0x2260 [32.1648] softirqs last enabled at (0): []copy_process+0xb37/0x2260 [32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0 [32.1652] ---[ end trace 0000000000000000 ]--- Furthermore, this list corruption eventually (when we happen to add a new block group) results in getting the switch_commits and dirty_cowonly_roots lists mixed up and attempting to call update_root on the tree root which can't be found in the tree root, resulting in a transaction abort: [87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1 [87.8272] ------------[ cut here ]------------ [87.8274] BTRFS: Transaction aborted (error -117) [87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703 [87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none) [87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 0 ---truncated---

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46253
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: pstore/ram: fix buffer overflow in persistent_ram_save_old() persistent_ram_save_old() can be called multiple times for the same persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz for PSTORE_TYPE_DMESG records). Currently, the function only allocates prz->old_log when it is NULL, but it unconditionally updates prz->old_log_size to the current buffer size and then performs memcpy_fromio() using this new size. If the buffer size has grown since the first allocation (which can happen across different kernel boot cycles), this leads to: 1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls 2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer using the incorrect (larger) old_log_size The KASAN splat would look similar to: BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x... Read of size N at addr ... by task ... The conditions are likely extremely hard to hit: 0. Crash with a ramoops write of less-than-record-max-size bytes. 1. Reboot: ramoops registers, pstore_get_records(0) reads old crash, allocates old_log with size X 2. Crash handler registered, timer started (if pstore_update_ms >= 0) 3. Oops happens (non-fatal, system continues) 4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X) 5. pstore_new_entry = 1, pstore_timer_kick() called 6. System continues running (not a panic oops) 7. Timer fires after pstore_update_ms milliseconds 8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1) 9. ramoops_get_next_prz() → persistent_ram_save_old() 10. buffer_size() returns Y, but old_log is X bytes 11. Y > X: memcpy_fromio() overflows heap Requirements: - a prior crash record exists that did not fill the record size (almost impossible since the crash handler writes as much as it can possibly fit into the record, capped by max record size and the kmsg buffer almost always exceeds the max record size) - pstore_update_ms >= 0 (disabled by default) - Non-fatal oops (system survives) Free and reallocate the buffer when the new size differs from the previously allocated size. This ensures old_log always has sufficient space for the data being copied.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46254
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: AppArmor: Allow apparmor to handle unaligned dfa tables The dfa tables can originate from kernel or userspace and 8-byte alignment isn't always guaranteed and as such may trigger unaligned memory accesses on various architectures. Resulting in the following [   73.901376] WARNING: CPU: 0 PID: 341 at security/apparmor/match.c:316 aa_dfa_unpack+0x6cc/0x720 [   74.015867] Modules linked in: binfmt_misc evdev flash sg drm drm_panel_orientation_quirks backlight i2c_core configfs nfnetlink autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid sr_mod hid cdrom sd_mod ata_generic ohci_pci ehci_pci ehci_hcd ohci_hcd pata_ali libata sym53c8xx scsi_transport_spi tg3 scsi_mod usbcore libphy scsi_common mdio_bus usb_common [   74.428977] CPU: 0 UID: 0 PID: 341 Comm: apparmor_parser Not tainted 6.18.0-rc6+ #9 NONE [   74.536543] Call Trace: [   74.568561] [<0000000000434c24>] dump_stack+0x8/0x18 [   74.633757] [<0000000000476438>] __warn+0xd8/0x100 [   74.696664] [<00000000004296d4>] warn_slowpath_fmt+0x34/0x74 [   74.771006] [<00000000008db28c>] aa_dfa_unpack+0x6cc/0x720 [   74.843062] [<00000000008e643c>] unpack_pdb+0xbc/0x7e0 [   74.910545] [<00000000008e7740>] unpack_profile+0xbe0/0x1300 [   74.984888] [<00000000008e82e0>] aa_unpack+0xe0/0x6a0 [   75.051226] [<00000000008e3ec4>] aa_replace_profiles+0x64/0x1160 [   75.130144] [<00000000008d4d90>] policy_update+0xf0/0x280 [   75.201057] [<00000000008d4fc8>] profile_replace+0xa8/0x100 [   75.274258] [<0000000000766bd0>] vfs_write+0x90/0x420 [   75.340594] [<00000000007670cc>] ksys_write+0x4c/0xe0 [   75.406932] [<0000000000767174>] sys_write+0x14/0x40 [   75.472126] [<0000000000406174>] linux_sparc_syscall+0x34/0x44 [   75.548802] ---[ end trace 0000000000000000 ]--- [   75.609503] dfa blob stream 0xfff0000008926b96 not aligned. [   75.682695] Kernel unaligned access at TPC[8db2a8] aa_dfa_unpack+0x6e8/0x720 Work around it by using the get_unaligned_xx() helpers.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46255
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: don't explicitly disable clocks in .remove() The clocks in fsl_edma_engine::muxclk are allocated and enabled with devm_clk_get_enabled(), which automatically cleans these resources up, but these clocks are also manually disabled in fsl_edma_remove(). This causes warnings on driver removal for each clock: edma_module already disabled WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8 [...] Call trace: clk_core_disable+0x198/0x1c8 (P) clk_disable+0x34/0x58 fsl_edma_remove+0x74/0xe8 [fsl_edma] [...] ---[ end trace 0000000000000000 ]--- edma_module already unprepared WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220 [...] Call trace: clk_core_unprepare+0x1f8/0x220 (P) clk_unprepare+0x34/0x58 fsl_edma_remove+0x7c/0xe8 [fsl_edma] [...] ---[ end trace 0000000000000000 ]--- Fix these warnings by removing the unnecessary fsl_disable_clocks() call in fsl_edma_remove().

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46256
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages LOCALIO is an NFS loopback mount optimization that avoids using the network for READ, WRITE and COMMIT if the NFS client and server are determined to be on the same system. But because LOCALIO is still fundamentally "just NFS loopback mount" it is susceptible to recursion deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then back into NFS via nfs_writepages. Fix LOCALIO's potential for direct reclaim deadlock by ensuring that all its page cache allocations are done from GFP_NOFS context. Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs: prevent stack overflows from page cache allocation").

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46259
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: procfs: fix missing RCU protection when reading real_parent in do_task_stat() When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent without proper RCU protection, which leads to: cpu 0 cpu 1 ----- ----- do_task_stat var = task->real_parent release_task call_rcu(delayed_put_task_struct) task_tgid_nr_ns(var) rcu_read_lock <--- Too late to protect task->real_parent! task_pid_ptr <--- UAF! rcu_read_unlock This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add proper RCU protection for accessing task->real_parent.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46261
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: spi: wpcm-fiu: Fix potential NULL pointer dereference in wpcm_fiu_probe() platform_get_resource_byname() can return NULL, which would cause a crash when passed the pointer to resource_size(). Move the fiu->memory_size assignment after the error check for devm_ioremap_resource() to prevent the potential NULL pointer dereference.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46263
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds stream encoder index v3 eng_id can be negative and that stream_enc_regs[] can be indexed out of bounds. eng_id is used directly as an index into stream_enc_regs[], which has only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can access memory past the end of the array. Add a bounds check using ARRAY_SIZE() before using eng_id as an index. The unsigned cast also rejects negative values. This avoids out-of-bounds access. Fixes the below smatch error: dcn*_resource.c: stream_encoder_create() may index stream_enc_regs[eng_id] out of bounds (size 5). drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c 1246 static struct stream_encoder *dcn35_stream_encoder_create( 1247 enum engine_id eng_id, 1248 struct dc_context *ctx) 1249 { ... 1255 1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */ 1257 if (eng_id <= ENGINE_ID_DIGF) { ENGINE_ID_DIGF is 5. should <= be dc_bios, 1283 eng_id, vpg, afmt, --> 1284 &stream_enc_regs[eng_id], ^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array. ... 1287 return &enc1->base; 1288 } v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast v3: The compiler already knows how to compare the two values, so the cast (int) is not needed. (Roman)

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46265
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix WQ_MEM_RECLAIM warning When sunrpc is used, if a reset triggered, our wq may lead the following trace: workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma] is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle [hns_roce_hw_v2] WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144 Call trace: check_flush_dependency+0xe0/0x144 start_flush_work.constprop.0+0x1d0/0x2f0 __flush_work.isra.0+0x40/0xb0 flush_work+0x14/0x30 hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2] ib_destroy_qp_user+0x9c/0x2b4 rdma_destroy_qp+0x34/0xb0 rpcrdma_ep_destroy+0x28/0xcc [rpcrdma] rpcrdma_ep_put+0x74/0xb4 [rpcrdma] rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma] xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18 Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46266
CRITICAL9.1

In the Linux kernel, the following vulnerability has been resolved: inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP Yizhou Zhao reported that simply having one RAW socket on protocol IPPROTO_RAW (255) was dangerous. socket(AF_INET, SOCK_RAW, 255); A malicious incoming ICMP packet can set the protocol field to 255 and match this socket, leading to FNHE cache changes. inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST") pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner "man 7 raw" states: A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able to send any IP protocol that is specified in the passed header. Receiving of all IP protocols via IPPROTO_RAW is not possible using raw sockets. Make sure we drop these malicious packets.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xCRITICAL 9.1
CVSS:3.x/CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H
References
CVE-2026-46267
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: nfc: hci: shdlc: Stop timers and work before freeing context llc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlc structure while its timers and state machine work may still be active. Timer callbacks can schedule sm_work, and sm_work accesses SHDLC state and the skb queues. If teardown happens in parallel with a queued/running work item, it can lead to UAF and other shutdown races. Stop all SHDLC timers and cancel sm_work synchronously before purging the queues and freeing the context. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46268
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: PCI/P2PDMA: Fix p2pmem_alloc_mmap() warning condition Commit b7e282378773 has already changed the initial page refcount of p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses "VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page refcount should not be zero and the following will be reported when CONFIG_DEBUG_VM is enabled: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000 flags: 0x20000000002000(reserved|node=0|zone=4) raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page)) ------------[ cut here ]------------ WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60 Fix by using "page_ref_count(page)" as the assertion condition.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46269
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree When probing the k230 pinctrl driver, the kernel triggers a NULL pointer dereference. The crash trace showed: [ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068 [ 0.740737] ... [ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc In k230_pinctrl_parse_functions(), we attempt to retrieve the device pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized after k230_pinctrl_parse_dt() completes. At the time of DT parsing, info->pctl_dev is still NULL, leading to the invalid dereference of info->pctl_dev->dev. Use the already available device pointer from platform_device instead of accessing through uninitialized pctl_dev.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
References
CVE-2026-46270
HIGH8.4

In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 8.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46271
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: do WoW offloads only on primary link In case of multi-link connection, WCN7850 firmware crashes due to WoW offloads enabled on both primary and secondary links. Change to do it only on primary link to fix it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
References
CVE-2026-46272
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etr: Fix race condition between sysfs and perf mode When trying to run perf and sysfs mode simultaneously, the WARN_ON() in tmc_etr_enable_hw() is triggered sometimes: WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] [..snip..] Call trace: tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L) tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] coresight_enable_path+0x1c8/0x218 [coresight] coresight_enable_sysfs+0xa4/0x228 [coresight] enable_source_store+0x58/0xa8 [coresight] dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x120/0x1b8 vfs_write+0x2c8/0x388 ksys_write+0x74/0x108 __arm64_sys_write+0x24/0x38 el0_svc_common.constprop.0+0x64/0x148 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Since the enablement of sysfs mode is separeted into two critical regions, one for sysfs buffer allocation and another for hardware enablement, it's possible to race with the perf mode. Fix this by double check whether the perf mode's been used before enabling the hardware in sysfs mode. mode: [sysfs mode] [perf mode] tmc_etr_get_sysfs_buffer() spin_lock(&drvdata->spinlock) [sysfs buffer allocation] spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() drvdata->etr_buf = etr_perf->etr_buf spin_unlock(&drvdata->spinlock) spin_lock(&drvdata->spinlock) tmc_etr_enable_hw() WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at the perf side spin_unlock(&drvdata->spinlock) With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf. This ensures we verify whether the perf mode's already running before we actually allocate the buffer. Then we can save the time of allocating/freeing the sysfs buffer if race with the perf mode.

Published: 2026-06-03Modified: 2026-06-17
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
References