All errata/p11/ALT-PU-2026-17327-3
ALT-PU-2026-17327-3

Package update kernel-image-6.18 in branch p11

Version6.18.55-alt1
Published2026-10-16
Max severityHIGH
Severity:

Closed issues (14)

CVE-2026-98050
HIGH7.5

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes netif_receive_skb(). This has not been accurate since the referenced commit; this patch makes that comment accurate again. mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX net_device without any conditions. The NAPI instance's poll, which may be running concurrent to the GC, is running as an independently-scheduled kthread which may be on a different CPU. The call to local_bh_disable() does not guard against this. If a tx-timestamp timeout produces an unmatched entry (which can be easily reproduced by running ptp4l and waiting for a port to reach the UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of a poll on another CPU, both sides mutate the GRO list concurrently, as shown below: [39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy) Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018 RIP: 0010:__list_add_valid_or_report+0x79/0xb0 RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540 RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003 R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0 Call Trace: gro_receive_skb+0xee/0x230 mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum] mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core] mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci] __napi_poll+0x31/0x1e0 napi_threaded_poll_loop+0x16b/0x1c0 napi_threaded_poll+0x71/0xa0 kthread+0xfb/0x260 ret_from_fork+0x22d/0x260 ret_from_fork_asm+0x1a/0x30 Kernel panic - not syncing: Fatal exception in interrupt The machinery that leads to this kernel panic has not been changed between 6.18.48 and mainline. This patch adds an ingress-delivery helper for the PTP packet_finish() path that calls netif_receive_skb() instead of napi_gro_receive(). netif_receive_skb(), unlike napi_gro_receive(), can be called from outside of the NAPI instance's poll context, which can occur at the call site for this path. RX stats accounting and the skb->dev assignment are still preserved; the only change is the delivery call itself. This removes GR ---truncated---

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xHIGH 7.5
CVSS:3.x/CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
CVE-2026-98051
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised next_index from intf->tx_spb_index on every iteration, so incr_ring() always produced the same result and only one slot was ever tested. Move the initialisation before the loop so each iteration advances next_index and the function correctly checks that cnt consecutive descriptor slots are available before allowing a new transmission.

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98052
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: clear txcb->last before writing each descriptor bcmasp_xmit() only wrote txcb->last = true for the final fragment of an SKB; non-final fragments left the field untouched. If a descriptor slot was reused while it still held a stale true from a previous SKB (possible when tx_spb_ring_full() underreported fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and call dev_consume_skb_any() prematurely, freeing the sk_buff while its remaining fragments were still in flight. Unconditionally clear txcb->last before the conditional set so every descriptor slot starts from a known false state regardless of what a prior transmission left behind.

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVE-2026-98053
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Refactor and fix init_config access Existing code accesses enties found in ->init_configs array through indexes that are part of ->config_ids array. Those two are limited by: ->num_init_configs and ->num_config_ids respectively. Using ID larger or equal to ->num_init_configs leads to out-of-bounds access: avs_path_module_send_init_configs() loop: (...) &acomp->tplg->init_configs[ids[i]] ^ out-of-bounds candidate Rather than adding another if-statement, refactor the code. There is no need to store the IDs, have a list of pointers to actual config-entries instead. As the verification of ->init_config entries does not differ from verification of other types that are part of the topology.c file, simply reuse the code.

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98054
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix unbalanced module reference count strace_open() invokes try_module_get() which on success takes the module reference. If any follow up operation causes strace_open() to fail, the refcount shall be put down.

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98062
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: bpf: Mark signal tracepoint siginfo arguments as scalar The signal_generate and signal_deliver tracepoints declare their info argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore treats it as a trusted pointer for tp_btf programs. Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special values for this argument. Those values are zero and one respectively, and are not pointers. A tp_btf program can currently dereference either value and fault the kernel. In particular, signal_generate can run from timer interrupt context, turning the fault into a kernel panic. Record both tracepoints in raw_tp_null_args[] and mark argument one as a non-pointer. This preserves scalar access to the cookie while rejecting direct and helper-mediated pointer use. Merely marking it nullable would not suffice because SEND_SIG_PRIV is nonzero.

Published: 2026-09-25Modified: 2026-10-02
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98078
MEDIUM4.4

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks.

Published: 2026-09-25Modified: 2026-10-08
CVSS 3.xMEDIUM 4.4
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:L
CVE-2026-98080
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not force reloc root creation during qgroup_account_snapshot() [BUG] When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota", it has a high chance to trigger the following kernel warning and flips the fs RO: BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup ------------[ cut here ]------------ WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173 CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs] Call Trace: insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_run_delayed_refs+0x4af/0x11c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_run_delayed_refs+0x9d/0xf0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] create_pending_snapshot+0x39d/0xf00 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] create_pending_snapshots+0x9b/0xc0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_commit_transaction+0x280/0xeb0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] prepare_to_relocate+0x147/0x200 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] relocate_block_group+0x6b/0x5e0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_relocate_block_group+0x92c/0x2380 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_relocate_chunk+0x3f/0x1a0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_balance+0xa2c/0x19c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_ioctl+0x2839/0x2d30 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __x64_sys_ioctl+0x416/0x9a0 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ---[ end trace 0000000000000000 ]--- BTRFS info (device dm-2): leaf 4593991680 gen 233 total ptrs 175 free space 5953 owner 2 BTRFS info (device dm-2): refs 3 lock_owner 2173 current 2173 item 0 key (166772736 METADATA_ITEM 1) itemoff 16250 itemsize 33 extent refs 1 gen 222 flags 2 ref#0: tree block backref root 266 [ Skip the tree dump ] item 174 key (263225344 METADATA_ITEM 0) itemoff 10328 itemsize 33 extent refs 1 gen 162 flags 258 ref#0: tree block backref root 267 BTRFS error (device dm-2): extent item not found for insert, bytenr 179847168 num_bytes 16384 parent 4594335744 root_objectid 273 owner 0 offset 0 BTRFS error (device dm-2): failed to run delayed ref for logical 179847168 num_bytes 16384 type 182 action 1 ref_mod 1: -117 [CAUSE] The above error is showing that there is a tree reference to a metadata extent that is no longer there. With "ref_verify" mount option (requires CONFIG_BTRFS_DEBUG), there is some extra debug output: BTRFS error (device dm-2): dumping block entry [180961280 16384], num_refs 0, metadata 1, from disk 0 BTRFS error (device dm-2): root entry 256, num_refs 18446744073709551615 BTRFS error (device dm-2): root entry 273, num_refs 18446744073709551615 BTRFS error (device dm-2): Ref action 3, root 273, ref_root 273, parent 0, owner 0, offset 0, num_refs 1 btrfs_force_cow_block+0x129/0x7d0 [btrfs] btrfs_cow_block+0x10a/0x250 [btrfs] btrfs_search_slot+0x5eb/0xf40 [btrfs] btrfs_insert_empty_items+0x3a/0x70 [btrfs] insert_with_overflow+0x53/0x130 [btrfs] btrfs_insert_dir_item+0x125/0x290 [btrfs] btrfs_add_link+0xaa/0x410 [btrfs] btrfs_rename+0x5ea/0xcd0 [btrfs] btrfs_rename2+0x28/0x60 [btrfs] vfs_rename+0x5b2/0xe10 filename_renameat2+0x244/0x430 __x64_sys_rename+0x48/0x70 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ---truncated---

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98082
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the possible bioc_list memory leak during error There are two possible ways to leak bioc memory on btrfs_ordered_extent::bioc_list: - An error occurred for btrfs_insert_one_raid_extent() Then the function btrfs_insert_raid_extent() immediately return without freeing any bioc in the bioc_list. - An ordered extent hit an IO error In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and skip the call on btrfs_insert_raid_extent() completely. Fix the problem by: - Introduce a new helper, btrfs_cleanup_ordered_bioc_list() Which will remove all bioc from the bioc_list, and release the bioc. - Call the above helper for btrfs_insert_raid_extent() So that the cleanup helper is always called no matter what. - Call the above helper for btrfs_finish_one_ordered() This is called just before the final release on the ordered extent. This was reported by Sashiko when reviewing another patch.

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98083
HIGH7.0

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects.

Published: 2026-09-25Modified: 2026-10-06
CVSS 3.xHIGH 7.0
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
CVE-2026-98109
MEDIUM4.7

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed.

Published: 2026-09-25Modified: 2026-10-03
CVSS 3.xMEDIUM 4.7
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98152
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queues exceed the backlog limit, the connect path only drops the device reference and leaks the newly allocated queue and its IB resources.

Published: 2026-09-25Modified: 2026-10-02
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
CVE-2026-98156
HIGH7.8

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected.

Published: 2026-09-25Modified: 2026-10-14
CVSS 3.xHIGH 7.8
CVSS:3.x/CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H
CVE-2026-98159
MEDIUM5.5

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: validate CLC firmware records The CLC region is supplied by firmware, but the loader trusts the region count and each record length. A malformed image can make the region table pointer precede the firmware buffer, make the record loop fail to advance, or index phy->clc past its end. Validate the table and record bounds before dereferencing or copying.

Published: 2026-09-25Modified: 2026-10-14
CVSS 3.xMEDIUM 5.5
CVSS:3.x/CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H