In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening.

In the Linux kernel, the following vulnerability has been resolved: net: lapb: increase LAPB_HEADER_LEN It is unclear if net/lapb code is supposed to be ready for 8021q. We can at least avoid crashes like the following : skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282 RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60 R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140 R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016 FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_push+0xe5/0x100 net/core/skbuff.c:2636 nr_header+0x36/0x320 net/netrom/nr_dev.c:69 dev_hard_header include/linux/netdevice.h:3148 [inline] vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83 dev_hard_header include/linux/netdevice.h:3148 [inline] lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149 lapb_establish_data_link+0x84/0xd0 lapb_device_event+0x4e0/0x670 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922 devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x158/0x460 net/socket.c:1227 sock_ioctl+0x626/0x8e0 net/socket.c:1346 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in cleanup_bearer() syzbot found [1] that after blamed commit, ub->ubsock->sk was NULL when attempting the atomic_dec() : atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count); Fix this by caching the tipc_net pointer. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 0 UID: 0 PID: 5896 Comm: kworker/0:3 Not tainted 6.13.0-rc1-next-20241203-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events cleanup_bearer RIP: 0010:read_pnet include/net/net_namespace.h:387 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:cleanup_bearer+0x1f7/0x280 net/tipc/udp_media.c:820 Code: 18 48 89 d8 48 c1 e8 03 42 80 3c 28 00 74 08 48 89 df e8 3c f7 99 f6 48 8b 1b 48 83 c3 30 e8 f0 e4 60 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 74 08 48 89 df e8 1a f7 99 f6 49 83 c7 e8 48 8b 1b RSP: 0018:ffffc9000410fb70 EFLAGS: 00010206 RAX: 0000000000000006 RBX: 0000000000000030 RCX: ffff88802fe45a00 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffc9000410f900 RBP: ffff88807e1f0908 R08: ffffc9000410f907 R09: 1ffff92000821f20 R10: dffffc0000000000 R11: fffff52000821f21 R12: ffff888031d19980 R13: dffffc0000000000 R14: dffffc0000000000 R15: ffff88807e1f0918 FS: 0000000000000000(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ca050b000 CR3: 0000000031c0c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

In the Linux kernel, the following vulnerability has been resolved: acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl Fix an issue detected by syzbot with KASAN: BUG: KASAN: vmalloc-out-of-bounds in cmd_to_func drivers/acpi/nfit/ core.c:416 [inline] BUG: KASAN: vmalloc-out-of-bounds in acpi_nfit_ctl+0x20e8/0x24a0 drivers/acpi/nfit/core.c:459 The issue occurs in cmd_to_func when the call_pkg->nd_reserved2 array is accessed without verifying that call_pkg points to a buffer that is appropriately sized as a struct nd_cmd_pkg. This can lead to out-of-bounds access and undefined behavior if the buffer does not have sufficient space. To address this, a check was added in acpi_nfit_ctl() to ensure that buf is not NULL and that buf_len is less than sizeof(*call_pkg) before accessing it. This ensures safe access to the members of call_pkg, including the nd_reserved2 array.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68

In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash.

In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: account for backlog updates from child qdisc In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics.

In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix for a potential deadlock This fixes a 'possible circular locking dependency detected' warning CPU0 CPU1 ---- ---- lock(&instance->reset_mutex); lock(&shost->scan_mutex); lock(&instance->reset_mutex); lock(&shost->scan_mutex); Fix this by temporarily releasing the reset_mutex.