Уязвимость функции setup_dsc_config() драйвера amdgpu ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции l2cap_le_flowctl_init() реализации протокола Bluetooth ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции tpm2_key_encode() подсистемы Trusted Platform Module (TPM) ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции tpm2_key_encode() подсистемы Trusted Platform Module (TPM) ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции log_ctrl() видео драйвера ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции __dwc3_stop_active_transfer() драйвера DesignWare USB3 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на доступность защищаемой информации

Уязвимость функции iwl_req_fw_callback() модуля drivers/net/wireless/intel/iwlwifi/iwl-drv.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak in tpm2_key_encode() 'scratch' is never freed. Fix this by calling kfree() in the success, and in the error case.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Modules linked in: ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix division by zero in setup_dsc_config When slice_height is 0, the division by slice_height in the calculation of the number of slices will cause a division by zero driver crash. This leaves the kernel in a state that requires a reboot. This patch adds a check to avoid the division by zero. The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor connected via Thunderbolt. The amdgpu driver crashed with this exception when I rebooted the system with the monitor connected. kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447) kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2)) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548) kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu After applying this patch, the driver no longer crashes when the monitor is connected and the system is rebooted. I believe this is the same issue reported for 3113.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: Use request_module_nowait This appears to work around a deadlock regression that came in with the LED merge in 6.9. The deadlock happens on my system with 24 iwlwifi radios, so maybe it something like all worker threads are busy and some work that needs to complete cannot complete. [also remove unnecessary "load_module" var and now-wrong comment]

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Do not use WARN when encode fails When asn1_encode_sequence() fails, WARN is not the correct solution. 1. asn1_encode_sequence() is not an internal function (located in lib/asn1_encode.c). 2. Location is known, which makes the stack trace useless. 3. Results a crash if panic_on_warn is set. It is also noteworthy that the use of WARN is undocumented, and it should be avoided unless there is a carefully considered rationale to use it. Replace WARN with pr_err, and print the return value instead, which is only useful piece of information.

In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-ctrls: show all owned controls in log_status" This reverts commit 9801b5b28c6929139d6fceeee8d739cc67bb2739. This patch introduced a potential deadlock scenario: [Wed May 8 10:02:06 2024] Possible unsafe locking scenario: [Wed May 8 10:02:06 2024] CPU0 CPU1 [Wed May 8 10:02:06 2024] ---- ---- [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1620:(hdl_vid_cap)->_lock); [Wed May 8 10:02:06 2024] lock(vivid_ctrls:1608:(hdl_user_vid)->_lock); For now just revert.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Wait unconditionally after issuing EndXfer command Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally.