Уязвимость функции gue_gro_receive() реализации протокола IPv4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность и доступность защищаемой информации

Уязвимость функции switchtec_ntb_remove() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции venus_remove() драйвера Qualcomm Venus V4L2 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции nilfs_btree_check_delete() файловой системы nilfs2 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность и доступность защищаемой информации

Уязвимость функции nf_reject_ip6_tcphdr_put() компонента netfilter ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность и доступность защищаемой информации

Уязвимость функции rtl2830_pid_filter() драйвера Realtek RTL2830 DVB-T ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции rtl2832_pid_filter() драйвера Realtek RTL2830 DVB-T ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции ether3_remove() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции tx() драйвера ATA over Ethernet (AoE) ядра операционной системы Linux, позволяющая нарушителю выполнить произвольный код или вызвать отказ в обслуживании

Уязвимость функции pxafb_remove() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции xenvif_flush_hash() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции ext4_ext_replay_update_ex() файловой системы ext4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции ext4_ext_try_to_merge_up() файловой системы ext4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции ext4_ext_insert_extent() файловой системы ext4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции ext4_split_extent_at() файловой системы ext4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции ext4_ext_handle_unwritten_extents() файловой системы ext4 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции jfs_ioc_trim() файловой системы jfs ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: fou: fix initialization of grc The grc must be initialize first. There can be a condition where if fou is NULL, goto out will be executed and grc would be used uninitialized.

In the Linux kernel, the following vulnerability has been resolved: vfs: fix race between evice_inodes() and find_inode()&iput() Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomic_read(inode->i_count)) continue; // return before // inode 261 passed the above check // list_lru_add_obj() // and then schedule out ->spin_unlock() // note here: the inode 261 // was still at sb list and hash list, // and I_FREEING|I_WILL_FREE was not been set btrfs_iget() // after some function calls ->find_inode() // found the above inode 261 ->spin_lock(inode) // check I_FREEING|I_WILL_FREE // and passed ->__iget() ->spin_unlock(inode) // schedule back ->spin_lock(inode) // check (I_NEW|I_FREEING|I_WILL_FREE) flags, // passed and set I_FREEING iput() ->spin_unlock(inode) ->spin_lock(inode) ->evict() // dec i_count to 0 ->iput_final() ->spin_unlock() ->evict() Now, we have two threads simultaneously evicting the same inode, which may trigger the BUG(inode->i_state & I_CLEAR) statement both within clear_inode() and iput(). To fix the bug, recheck the inode->i_count after holding i_lock. Because in the most scenarios, the first check is valid, and the overhead of spin_lock() can be reduced. If there is any misunderstanding, please let me know, thanks. [1]: https://lore.kernel.org/linux-btrfs/000000000000eabe1d0619c48986@google.com/ [2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable() return false when I reproduced the bug.

In the Linux kernel, the following vulnerability has been resolved: tcp: check skb is non-NULL in tcp_rto_delta_us() We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_even ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put() syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143 tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679 inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750 __sys_connect_file net/socket.c:2061 [inline] __sys_connect+0x606/0x690 net/socket.c:2078 __do_sys_connect net/socket.c:2088 [inline] __se_sys_connect net/socket.c:2085 [inline] __x64_sys_connect+0x91/0xe0 net/socket.c:2085 x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfsd: return -EINVAL when namelen is 0 When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406 [ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ T1205] Call Trace: [ T1205] dump_stack+0x9a/0xd0 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] __kasan_report.cold+0x34/0x84 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] kasan_report+0x3a/0x50 [ T1205] nfs4_client_to_reclaim+0xe9/0x260 [ T1205] ? nfsd4_release_lockowner+0x410/0x410 [ T1205] cld_pipe_downcall+0x5ca/0x760 [ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0 [ T1205] ? down_write_killable_nested+0x170/0x170 [ T1205] ? avc_policy_seqno+0x28/0x40 [ T1205] ? selinux_file_permission+0x1b4/0x1e0 [ T1205] rpc_pipe_write+0x84/0xb0 [ T1205] vfs_write+0x143/0x520 [ T1205] ksys_write+0xc9/0x170 [ T1205] ? __ia32_sys_read+0x50/0x50 [ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110 [ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110 [ T1205] do_syscall_64+0x33/0x40 [ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1 [ T1205] RIP: 0033:0x7fdbdb761bc7 [ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514 [ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7 [ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008 [ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001 [ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b [ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000 [ T1205] ================================================================== Fix it by checking namelen.

In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs"), the function flush_workqueue is invoked to flush the work queue iwcm_wq. But at that time, the work queue iwcm_wq was created via the function alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM. Because the current process is trying to flush the whole iwcm_wq, if iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current process is not reclaiming memory or running on a workqueue which doesn't have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee leading to a deadlock. The call trace is as below: [ 125.350876][ T1430] Call Trace: [ 125.356281][ T1430] [ 125.361285][ T1430] ? __warn (kernel/panic.c:693) [ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239) [ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970) [ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151) [ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm [ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910) [ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161) [ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm [ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma [ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma [ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231) [ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393) [ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339) [ 125.531837][ T1430] kthread (kernel/kthread.c:389) [ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147) [ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257) [ 125.566487][ T1430] [ 125.566488][ T1430] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() Patch series "nilfs2: fix potential issues with empty b-tree nodes". This series addresses three potential issues with empty b-tree nodes that can occur with corrupted filesystem images, including one recently discovered by syzbot. This patch (of 3): If a b-tree is broken on the device, and the b-tree height is greater than 2 (the level of the root node is greater than 1) even if the number of child nodes of the b-tree root is 0, a NULL pointer dereference occurs in nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert(). This is because, when the number of child nodes of the b-tree root is 0, nilfs_btree_do_lookup() does not set the block buffer head in any of path[x].bp_bh, leaving it as the initial value of NULL, but if the level of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(), which accesses the buffer memory of path[x].bp_bh, is called. Fix this issue by adding a check to nilfs_btree_root_broken(), which performs sanity checks when reading the root node from the device, to detect this inconsistency. Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause early on.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103 CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697 __ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573 ext4_lookup_entry fs/ext4/namei.c:1727 [inline] ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795 lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633 filename_create+0x297/0x540 fs/namei.c:3980 do_symlinkat+0xf9/0x3a0 fs/namei.c:4587 __do_sys_symlinkat fs/namei.c:4610 [inline] __se_sys_symlinkat fs/namei.c:4607 [inline] __x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3e73ced469 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469 RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0 RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290 R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0 Calling ext4_xattr_ibody_find right after reading the inode with ext4_get_inode_loc will lead to a check of the validity of the xattrs, avoiding this problem.

In the Linux kernel, the following vulnerability has been resolved: block: fix potential invalid pointer dereference in blk_add_partition The blk_add_partition() function initially used a single if-condition (IS_ERR(part)) to check for errors when adding a partition. This was modified to handle the specific case of -ENXIO separately, allowing the function to proceed without logging the error in this case. However, this change unintentionally left a path where md_autodetect_dev() could be called without confirming that part is a valid pointer. This commit separates the error handling logic by splitting the initial if-condition, improving code readability and handling specific error scenarios explicitly. The function now distinguishes the general error case from -ENXIO without altering the existing behavior of md_autodetect_dev() calls.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | ? | ? | ? | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | ? \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> ? | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Modules linked in: CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07 RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246 RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640 R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bcm_release+0x250/0x880 net/can/bcm.c:1578 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcfb51ee969 Code: Unable to access opcode bytes at 0x7fcfb51ee93f. RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0 R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160

In the Linux kernel, the following vulnerability has been resolved: sock_map: Add a cond_resched() in sock_hash_free() Several syzbot soft lockup reports all have in common sock_hash_free() If a map with a large number of buckets is destroyed, we need to yield the cpu when needed.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broadcast_deliver() __netlink_sendskb() netlink_deliver_tap() __netlink_deliver_tap_skb() dev_queue_xmit() __dev_queue_xmit() ; with IRQS disabled ... spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags) issues the warning (as reported by syzbot reproducer): WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120 Fix this by implementing a two-phase skb reclamation in 'ieee80211_do_stop()', where actual work is performed outside of a section with interrupts disabled.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: always wait for both firmware loading attempts In 'rtw_wait_firmware_completion()', always wait for both (regular and wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()' has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue 'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually the wowlan one) is still in progress, causing UAF detected by KASAN.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix out-of-bounds in dbNextAG() and diAlloc() In dbNextAG() , there is no check for the case where bmp->db_numag is greater or same than MAXAG due to a polluted image, which causes an out-of-bounds. Therefore, a bounds check should be added in dbMount(). And in dbNextAG(), a check for the case where agpref is greater than bmp->db_numag should be added, so an out-of-bounds exception should be prevented. Additionally, a check for the case where agno is greater or same than MAXAG should be added in diAlloc() to prevent out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled Fix missuse of spin_lock_irq()/spin_unlock_irq() when spin_lock_irqsave()/spin_lock_irqrestore() was hold. This was discovered through the lock debugging, and the corresponding log is as follows: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 _raw_spin_unlock_irqrestore+0x84/0xc8 add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2] hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2] hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2] create_qp+0x138/0x258 ib_create_qp_kernel+0x50/0xe8 create_mad_qp+0xa8/0x128 ib_mad_port_open+0x218/0x448 ib_mad_init_device+0x70/0x1f8 add_client_context+0xfc/0x220 enable_device_and_get+0xd0/0x140 ib_register_device.part.0+0xf4/0x1c8 ib_register_device+0x34/0x50 hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2] hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2] hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2]

In the Linux kernel, the following vulnerability has been resolved: nfsd: call cache_put if xdr_reserve_space returns NULL If not enough buffer space available, but idmap_lookup has triggered lookup_fn which calls cache_get and returns successfully. Then we missed to call cache_put here which pairs with cache_get. Reviwed-by: Jeff Layton

In the Linux kernel, the following vulnerability has been resolved: padata: use integer wrap around to prevent deadlock on seq_nr overflow When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow.

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Block path traversal Most firmware names are hardcoded strings, or are constructed from fairly constrained format strings where the dynamic parts are just some hex numbers or such. However, there are a couple codepaths in the kernel where firmware file names contain string components that are passed through from a device or semi-privileged userspace; the ones I could find (not counting interfaces that require root privileges) are: - lpfc_sli4_request_firmware_update() seems to construct the firmware filename from "ModelName", a string that was previously parsed out of some descriptor ("Vital Product Data") in lpfc_fill_vpd() - nfp_net_fw_find() seems to construct a firmware filename from a model name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I think parses some descriptor that was read from the device. (But this case likely isn't exploitable because the format string looks like "netronome/nic_%s", and there shouldn't be any *folders* starting with "netronome/nic_". The previous case was different because there, the "%s" is *at the start* of the format string.) - module_flash_fw_schedule() is reachable from the ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is enough to pass the privilege check), and takes a userspace-provided firmware name. (But I think to reach this case, you need to have CAP_NET_ADMIN over a network namespace that a special kind of ethernet device is mapped into, so I think this is not a viable attack path in practice.) Fix it by rejecting any firmware names containing ".." path components. For what it's worth, I went looking and haven't found any USB device drivers that use the firmware loader dangerously.

In the Linux kernel, the following vulnerability has been resolved: net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove.

In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: assign irq bypass producer token correctly We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Added NULL check for lookup_atid The lookup_atid() function can return NULL if the ATID is invalid or does not exist in the identifier table, which could lead to dereferencing a null pointer without a check in the `act_establish()` and `act_open_rpl()` functions. Add a NULL check to prevent null pointer dereferencing. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix if-statement expression in ks_pcie_quirk() This code accidentally uses && where || was intended. It potentially results in a NULL dereference. Thus, fix the if-statement expression to use the correct condition. [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential oob read in nilfs_btree_check_delete() The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case.

In the Linux kernel, the following vulnerability has been resolved: tpm: Clean up TPM space after command failure tpm_dev_transmit prepares the TPM space before attempting command transmission. However if the command fails no rollback of this preparation is done. This can result in transient handles being leaked if the device is subsequently closed with no further commands performed. Fix this by flushing the space in the event of command transmission failure.

In the Linux kernel, the following vulnerability has been resolved: efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic.

In the Linux kernel, the following vulnerability has been resolved: ACPI: sysfs: validate return type of _STR method Only buffer objects are valid return values of _STR. If something else is returned description_show() will access invalid memory.

In the Linux kernel, the following vulnerability has been resolved: vhost/scsi: null-ptr-dereference in vhost_scsi_get_req() Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") a null pointer dereference bug can be triggered when guest sends an SCSI AN request. In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with `&v_req.tmf.lun[1]` within a switch-case block and is then passed to vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is set to NULL in this branch. Later, in vhost_scsi_get_req(), `vc->target` is dereferenced without being checked, leading to a null pointer dereference bug. This bug can be triggered from guest. When this bug occurs, the vhost_worker process is killed while holding `vq->mutex` and the corresponding tpg will remain occupied indefinitely. Below is the KASAN report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1 Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:vhost_scsi_get_req+0x165/0x3a0 Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6 04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00 RSP: 0018:ffff888017affb50 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8 RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000 FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0 Call Trace: ? show_regs+0x86/0xa0 ? die_addr+0x4b/0xd0 ? exc_general_protection+0x163/0x260 ? asm_exc_general_protection+0x27/0x30 ? vhost_scsi_get_req+0x165/0x3a0 vhost_scsi_ctl_handle_vq+0x2a4/0xca0 ? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10 ? __switch_to+0x721/0xeb0 ? __schedule+0xda5/0x5710 ? __kasan_check_write+0x14/0x30 ? _raw_spin_lock+0x82/0xf0 vhost_scsi_ctl_handle_kick+0x52/0x90 vhost_run_work_list+0x134/0x1b0 vhost_task_fn+0x121/0x350 ... ---[ end trace 0000000000000000 ]--- Let's add a check in vhost_scsi_get_req. [whitespace fixes]

In the Linux kernel, the following vulnerability has been resolved: btrfs: wait for fixup workers before stopping cleaner kthread during umount During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_h ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a NULL pointer dereference when failed to start a new trasacntion [BUG] Syzbot reported a NULL pointer dereference with the following crash: FAULT_INJECTION: forcing a failure. start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676 prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642 relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678 ... BTRFS info (device loop0): balance: ended with status: -12 Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667] RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926 Call Trace: commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496 btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430 del_balance_item fs/btrfs/volumes.c:3678 [inline] reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742 btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] The allocation failure happens at the start_transaction() inside prepare_to_relocate(), and during the error handling we call unset_reloc_control(), which makes fs_info->balance_ctl to be NULL. Then we continue the error path cleanup in btrfs_balance() by calling reset_balance_state() which will call del_balance_item() to fully delete the balance item in the root tree. However during the small window between set_reloc_contrl() and unset_reloc_control(), we can have a subvolume tree update and created a reloc_root for that subvolume. Then we go into the final btrfs_commit_transaction() of del_balance_item(), and into btrfs_update_reloc_root() inside commit_fs_roots(). That function checks if fs_info->reloc_ctl is in the merge_reloc_tree stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer dereference. [FIX] Just add extra check on fs_info->reloc_ctl inside btrfs_update_reloc_root(), before checking fs_info->reloc_ctl->merge_reloc_tree. That DEAD_RELOC_TREE handling is to prevent further modification to the reloc tree during merge stage, but since there is no reloc_ctl at all, we do not need to bother that.

In the Linux kernel, the following vulnerability has been resolved: nfsd: map the EBADMSG to nfserr_io to avoid warning Ext4 will throw -EBADMSG through ext4_readdir when a checksum error occurs, resulting in the following WARNING. Fix it by mapping EBADMSG to nfserr_io. nfsd_buffered_readdir iterate_dir // -EBADMSG -74 ext4_readdir // .iterate_shared ext4_dx_readdir ext4_htree_fill_tree htree_dirblock_to_tree ext4_read_dirblock __ext4_read_dirblock ext4_dirblock_csum_verify warn_no_space_for_csum __warn_no_space_for_csum return ERR_PTR(-EFSBADCRC) // -EBADMSG -74 nfserrno // WARNING [ 161.115610] ------------[ cut here ]------------ [ 161.116465] nfsd: non-standard errno: -74 [ 161.117315] WARNING: CPU: 1 PID: 780 at fs/nfsd/nfsproc.c:878 nfserrno+0x9d/0xd0 [ 161.118596] Modules linked in: [ 161.119243] CPU: 1 PID: 780 Comm: nfsd Not tainted 5.10.0-00014-g79679361fd5d #138 [ 161.120684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qe mu.org 04/01/2014 [ 161.123601] RIP: 0010:nfserrno+0x9d/0xd0 [ 161.124676] Code: 0f 87 da 30 dd 00 83 e3 01 b8 00 00 00 05 75 d7 44 89 ee 48 c7 c7 c0 57 24 98 89 44 24 04 c6 05 ce 2b 61 03 01 e8 99 20 d8 00 <0f> 0b 8b 44 24 04 eb b5 4c 89 e6 48 c7 c7 a0 6d a4 99 e8 cc 15 33 [ 161.127797] RSP: 0018:ffffc90000e2f9c0 EFLAGS: 00010286 [ 161.128794] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 161.130089] RDX: 1ffff1103ee16f6d RSI: 0000000000000008 RDI: fffff520001c5f2a [ 161.131379] RBP: 0000000000000022 R08: 0000000000000001 R09: ffff8881f70c1827 [ 161.132664] R10: ffffed103ee18304 R11: 0000000000000001 R12: 0000000000000021 [ 161.133949] R13: 00000000ffffffb6 R14: ffff8881317c0000 R15: ffffc90000e2fbd8 [ 161.135244] FS: 0000000000000000(0000) GS:ffff8881f7080000(0000) knlGS:0000000000000000 [ 161.136695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 161.137761] CR2: 00007fcaad70b348 CR3: 0000000144256006 CR4: 0000000000770ee0 [ 161.139041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 161.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 161.141519] PKRU: 55555554 [ 161.142076] Call Trace: [ 161.142575] ? __warn+0x9b/0x140 [ 161.143229] ? nfserrno+0x9d/0xd0 [ 161.143872] ? report_bug+0x125/0x150 [ 161.144595] ? handle_bug+0x41/0x90 [ 161.145284] ? exc_invalid_op+0x14/0x70 [ 161.146009] ? asm_exc_invalid_op+0x12/0x20 [ 161.146816] ? nfserrno+0x9d/0xd0 [ 161.147487] nfsd_buffered_readdir+0x28b/0x2b0 [ 161.148333] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.149258] ? nfsd_buffered_filldir+0xf0/0xf0 [ 161.150093] ? wait_for_concurrent_writes+0x170/0x170 [ 161.151004] ? generic_file_llseek_size+0x48/0x160 [ 161.151895] nfsd_readdir+0x132/0x190 [ 161.152606] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.153516] ? nfsd_unlink+0x380/0x380 [ 161.154256] ? override_creds+0x45/0x60 [ 161.155006] nfsd4_encode_readdir+0x21a/0x3d0 [ 161.155850] ? nfsd4_encode_readlink+0x210/0x210 [ 161.156731] ? write_bytes_to_xdr_buf+0x97/0xe0 [ 161.157598] ? __write_bytes_to_xdr_buf+0xd0/0xd0 [ 161.158494] ? lock_downgrade+0x90/0x90 [ 161.159232] ? nfs4svc_decode_voidarg+0x10/0x10 [ 161.160092] nfsd4_encode_operation+0x15a/0x440 [ 161.160959] nfsd4_proc_compound+0x718/0xe90 [ 161.161818] nfsd_dispatch+0x18e/0x2c0 [ 161.162586] svc_process_common+0x786/0xc50 [ 161.163403] ? nfsd_svc+0x380/0x380 [ 161.164137] ? svc_printk+0x160/0x160 [ 161.164846] ? svc_xprt_do_enqueue.part.0+0x365/0x380 [ 161.165808] ? nfsd_svc+0x380/0x380 [ 161.166523] ? rcu_is_watching+0x23/0x40 [ 161.167309] svc_process+0x1a5/0x200 [ 161.168019] nfsd+0x1f5/0x380 [ 161.168663] ? nfsd_shutdown_threads+0x260/0x260 [ 161.169554] kthread+0x1c4/0x210 [ 161.170224] ? kthread_insert_work_sanity_check+0x80/0x80 [ 161.171246] ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate When doing cleanup, if flags without OCFS2_BH_READAHEAD, it may trigger NULL pointer dereference in the following ocfs2_set_buffer_uptodate() if bh is NULL.

In the Linux kernel, the following vulnerability has been resolved: resource: fix region_intersects() vs add_memory_driver_managed() On a system with CXL memory, the resource tree (/proc/iomem) related to CXL memory may look like something as follows. 490000000-50fffffff : CXL Window 0 490000000-50fffffff : region0 490000000-50fffffff : dax0.0 490000000-50fffffff : System RAM (kmem) Because drivers/dax/kmem.c calls add_memory_driver_managed() during onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL Window X". This confuses region_intersects(), which expects all "System RAM" resources to be at the top level of iomem_resource. This can lead to bugs. For example, when the following command line is executed to write some memory in CXL memory range via /dev/mem, $ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1 dd: error writing '/dev/mem': Bad address 1+0 records in 0+0 records out 0 bytes copied, 0.0283507 s, 0.0 kB/s the command fails as expected. However, the error code is wrong. It should be "Operation not permitted" instead of "Bad address". More seriously, the /dev/mem permission checking in devmem_is_allowed() passes incorrectly. Although the accessing is prevented later because ioremap() isn't allowed to map system RAM, it is a potential security issue. During command executing, the following warning is reported in the kernel log for calling ioremap() on system RAM. ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d Call Trace: memremap+0xcb/0x184 xlate_dev_mem_ptr+0x25/0x2f write_mem+0x94/0xfb vfs_write+0x128/0x26d ksys_write+0xac/0xfe do_syscall_64+0x9a/0xfd entry_SYSCALL_64_after_hwframe+0x4b/0x53 The details of command execution process are as follows. In the above resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a top level resource. So, region_intersects() will report no System RAM resources in the CXL memory region incorrectly, because it only checks the top level resources. Consequently, devmem_is_allowed() will return 1 (allow access via /dev/mem) for CXL memory region incorrectly. Fortunately, ioremap() doesn't allow to map System RAM and reject the access. So, region_intersects() needs to be fixed to work correctly with the resource tree with "System RAM" not at top level as above. To fix it, if we found a unmatched resource in the top level, we will continue to search matched resources in its descendant resources. So, we will not miss any matched resources in resource tree anymore. In the new implementation, an example resource tree |------------- "CXL Window 0" ------------| |-- "System RAM" --| will behave similar as the following fake resource tree for region_intersects(, IORESOURCE_SYSTEM_RAM, ), |-- "System RAM" --||-- "CXL Window 0a" --| Where "CXL Window 0a" is part of the original "CXL Window 0" that isn't covered by "System RAM".

In the Linux kernel, the following vulnerability has been resolved: drm: omapdrm: Add missing check for alloc_ordered_workqueue As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue.

In the Linux kernel, the following vulnerability has been resolved: ext4: update orig_path in ext4_find_extent() In ext4_find_extent(), if the path is not big enough, we free it and set *orig_path to NULL. But after reallocating and successfully initializing the path, we don't update *orig_path, in which case the caller gets a valid path but a NULL ppath, and this may cause a NULL pointer dereference or a path memory leak. For example: ext4_split_extent path = *ppath = 2000 ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path = 2000); *orig_path = path = NULL; path = kcalloc() = 3000 ext4_split_extent_at(*ppath = NULL) path = *ppath; ex = path[depth].p_ext; // NULL pointer dereference! ================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000010 CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847 RIP: 0010:ext4_split_extent_at+0x6d/0x560 Call Trace: ext4_split_extent.isra.0+0xcb/0x1b0 ext4_ext_convert_to_initialized+0x168/0x6c0 ext4_ext_handle_unwritten_extents+0x325/0x4d0 ext4_ext_map_blocks+0x520/0xdb0 ext4_map_blocks+0x2b0/0x690 ext4_iomap_begin+0x20e/0x2c0 [...] ================================================================== Therefore, *orig_path is updated when the extent lookup succeeds, so that the caller can safely use path or *ppath.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix double brelse() the buffer of the extents path In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been released, otherwise it may be released twice. An example of what triggers this is as follows: split2 map split1 |--------|-------|--------| ext4_ext_map_blocks ext4_ext_handle_unwritten_extents ext4_split_convert_extents // path->p_depth == 0 ext4_split_extent // 1. do split1 ext4_split_extent_at |ext4_ext_insert_extent | ext4_ext_create_new_leaf | ext4_ext_grow_indepth | le16_add_cpu(&neh->eh_depth, 1) | ext4_find_extent | // return -ENOMEM |// get error and try zeroout |path = ext4_find_extent | path->p_depth = 1 |ext4_ext_try_to_merge | ext4_ext_try_to_merge_up | path->p_depth = 0 | brelse(path[1].p_bh) ---> not set to NULL here |// zeroout success // 2. update path ext4_find_extent // 3. do split2 ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth le16_add_cpu(&neh->eh_depth, 1) ext4_find_extent path[0].p_bh = NULL; path->p_depth = 1 read_extent_tree_block ---> return err // path[1].p_bh is still the old value ext4_free_ext_path ext4_ext_drop_refs // path->p_depth == 1 brelse(path[1].p_bh) ---> brelse a buffer twice Finally got the following WARRNING when removing the buffer from lru: ============================================ VFS: brelse: Trying to free free buffer WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90 CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716 RIP: 0010:__brelse+0x58/0x90 Call Trace: __find_get_block+0x6e7/0x810 bdev_getblk+0x2b/0x480 __ext4_get_inode_loc+0x48a/0x1240 ext4_get_inode_loc+0xb2/0x150 ext4_reserve_inode_write+0xb7/0x230 __ext4_mark_inode_dirty+0x144/0x6a0 ext4_ext_insert_extent+0x9c8/0x3230 ext4_ext_map_blocks+0xf45/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ============================================

In the Linux kernel, the following vulnerability has been resolved: ext4: aovid use-after-free in ext4_ext_insert_extent() As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at() We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid use-after-free in ext4_ext_show_leaf() In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: ensure the fw_info is not null before using it This resolves the dereference null return value warning reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize get_bytes_per_element's default to 1 Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in degamma hardware format translation Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream before comparing them [WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of new_ea in ea_buffer syzbot reports that lzo1x_1_do_compress is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178 ... Uninit was stored to memory at: ea_put fs/jfs/xattr.c:639 [inline] ... Local variable ea_buf created at: __jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662 __jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934 ===================================================== The reason is ea_buf->new_ea is not initialized properly. Fix this by using memset to empty its content at the beginning in ea_get().

In the Linux kernel, the following vulnerability has been resolved: jfs: check if leafidx greater than num leaves per dmap tree syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf. Shaggy: Modified sanity check to apply to control pages as well as leaf pages.

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uaf in dbFreeBits [syzbot reported] ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216 CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __mutex_lock_common kernel/locking/mutex.c:587 [inline] __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline] dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Freed by task 5218: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kfree+0x149/0x360 mm/slub.c:4594 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454 reconfigure_super+0x445/0x880 fs/super.c:1083 vfs_cmd_reconfigure fs/fsopen.c:263 [inline] vfs_fsconfig_locked fs/fsopen.c:292 [inline] __do_sys_fsconfig fs/fsopen.c:473 [inline] __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Analysis] There are two paths (dbUnmount and jfs_ioc_trim) that generate race condition when accessing bmap, which leads to the occurrence of uaf. Use the lock s_umount to synchronize them, in order to avoid uaf caused by race condition.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using dc->clk_mgr [WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for top_pipe_to_program in commit_planes_for_stream This commit addresses a null pointer dereference issue in the `commit_planes_for_stream` function at line 4140. The issue could occur when `top_pipe_to_program` is null. The fix adds a check to ensure `top_pipe_to_program` is not null before accessing its stream_res. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906)

In the Linux kernel, the following vulnerability has been resolved: fbdev: pxafb: Fix possible use after free in pxafb_task() In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix array out-of-bound access in SoC stats Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx() function access ath11k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath11k_dp_process_rx() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: blk_iocost: fix more out of bound shifts Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits.

In the Linux kernel, the following vulnerability has been resolved: net/xen-netback: prevent UAF in xenvif_flush_hash() During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it.

In the Linux kernel, the following vulnerability has been resolved: sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline]

In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init() One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len.

In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 C ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prevent nf_skb_duplicated corruption syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write per-cpu variable nf_skb_duplicated in an unsafe way [1]. Disabling preemption as hinted by the splat is not enough, we have to disable soft interrupts as well. [1] BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316 caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622fccb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_preemption_disabled+0x10e/0x120 lib/smp_processor_id.c:49 nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 nft_dup_ipv4_eval+0x1db/0x300 net/ipv4/netfilter/nft_dup_ipv4.c:30 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x202/0x320 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook+0x2c4/0x450 include/linux/netfilter.h:269 NF_HOOK_COND include/linux/netfilter.h:302 [inline] ip_output+0x185/0x230 net/ipv4/ip_output.c:433 ip_local_out net/ipv4/ip_output.c:129 [inline] ip_send_skb+0x74/0x100 net/ipv4/ip_output.c:1495 udp_send_skb+0xacf/0x1650 net/ipv4/udp.c:981 udp_sendmsg+0x1c21/0x2a60 net/ipv4/udp.c:1269 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4ce4f7def9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4ce5d4a038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f4ce5135f80 RCX: 00007f4ce4f7def9 RDX: 0000000000000001 RSI: 0000000020005d40 RDI: 0000000000000006 RBP: 00007f4ce4ff0b76 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f4ce5135f80 R15: 00007ffd4cbc6d68

In the Linux kernel, the following vulnerability has been resolved: ACPI: battery: Fix possible crash when unregistering a battery hook When a battery hook returns an error when adding a new battery, then the battery hook is automatically unregistered. However the battery hook provider cannot know that, so it will later call battery_hook_unregister() on the already unregistered battery hook, resulting in a crash. Fix this by using the list head to mark already unregistered battery hooks as already being unregistered so that they can be ignored by battery_hook_unregister().

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix null-ptr-deref when journal load failed. During the mounting process, if journal_reset() fails because of too short journal, then lead to jbd2_journal_load() fails with NULL j_sb_buffer. Subsequently, ocfs2_journal_shutdown() calls jbd2_journal_flush()->jbd2_cleanup_journal_tail()-> __jbd2_update_log_tail()->jbd2_journal_update_sb_log_tail() ->lock_buffer(journal->j_sb_buffer), resulting in a null-pointer dereference error. To resolve this issue, we should check the JBD2_LOADED flag to ensure the journal was properly loaded. Additionally, use journal instead of osb->journal directly to simplify the code.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: reserve space for inline xattr before attaching reflink tree One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix.

In the Linux kernel, the following vulnerability has been resolved: jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail() to recover some journal space. But if an error occurs while executing jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free space right away, we try other branches, and if j_committing_transaction is NULL (i.e., the tid is 0), we will get the following complain: ============================================ JBD2: I/O error when updating journal superblock for sdd-8. __jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available __jbd2_log_wait_for_space: no way to get more journal space in sdd-8 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0 Modules linked in: CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1 RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0 Call Trace: add_transaction_credits+0x5d1/0x5e0 start_this_handle+0x1ef/0x6a0 jbd2__journal_start+0x18b/0x340 ext4_dirty_inode+0x5d/0xb0 __mark_inode_dirty+0xe4/0x5d0 generic_update_time+0x60/0x70 [...] ============================================ So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to clean up at the moment, continue to try to reclaim free space in other ways. Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt when updating journal superblock fails") to make jbd2_cleanup_journal_tail return the correct error code.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package() ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0 ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause NULL pointer dereference later. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: mailbox: bcm2835: Fix timeout during suspend mode During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs

In the Linux kernel, the following vulnerability has been resolved: ocfs2: remove unreasonable unlock in ocfs2_read_blocks Patch series "Misc fixes for ocfs2_read_blocks", v5. This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix the issue reported by syzbot, which detects bad unlock balance in ocfs2_read_blocks(). The second patch fixes an issue reported by Heming Zhao when reviewing above fix. This patch (of 2): There was a lock release before exiting, so remove the unreasonable unlock.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel dqi_sync_work before freeing oinfo ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 color transformation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: r8169: add tally counter fields added with RTL8125 RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it.

In the Linux kernel, the following vulnerability has been resolved: uprobes: fix kernel info leak via "[uprobes]" vma xol_add_vma() maps the uninitialized page allocated by __create_xol_area() into userspace. On some architectures (x86) this memory is readable even without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ, although this doesn't really matter, debugger can read this memory anyway.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix zero-division error when disabling tc cbs The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled") allows the "port_transmit_rate_kbps" to be set to a value of 0, which is then passed to the "div_s64" function when tc-cbs is disabled. This leads to a zero-division error. When tc-cbs is disabled, the idleslope, sendslope, and credit values the credit values are not required to be configured. Therefore, adding a return statement after setting the txQ mode to DCB when tc-cbs is disabled would prevent a zero-division error.

In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free bug in venus_remove due to race condition in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove.

In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.

In the Linux kernel, the following vulnerability has been resolved: ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(), the 'ppath' is updated but it is the 'path' that is freed, thus potentially triggering a double-free in the following process: ext4_ext_replay_update_ex ppath = path ext4_force_split_extent_at(&ppath) ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path) ---> path First freed *orig_path = path = NULL ---> null ppath kfree(path) ---> path double-free !!! So drop the unnecessary ppath and use path directly to avoid this problem. And use ext4_find_extent() directly to update path, avoiding unnecessary memory allocation and freeing. Also, propagate the error returned by ext4_find_extent() instead of using strange error codes.

In the Linux kernel, the following vulnerability has been resolved: i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume In case there is any sort of clock controller attached to this I2C bus controller, for example Versaclock or even an AIC32x4 I2C codec, then an I2C transfer triggered from the clock controller clk_ops .prepare callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex. This is because the clock controller first grabs the prepare_lock mutex and then performs the prepare operation, including its I2C access. The I2C access resumes this I2C bus controller via .runtime_resume callback, which calls clk_prepare_enable(), which attempts to grab the prepare_lock mutex again and deadlocks. Since the clock are already prepared since probe() and unprepared in remove(), use simple clk_enable()/clk_disable() calls to enable and disable the clock on runtime suspend and resume, to avoid hitting the prepare_lock mutex.

In the Linux kernel, the following vulnerability has been resolved: tipc: guard against string buffer overrun Smatch reports that copying media_name and if_name to name_parts may overwrite the destination. .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16) This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs. Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge") Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix memory disclosure When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix error path in multi-packet WQE transmit Remove the erroneous unmap in case no DMA mapping was established The multi-packet WQE transmit code attempts to obtain a DMA mapping for the skb. This could fail, e.g. under memory pressure, when the IOMMU driver just can't allocate more memory for page tables. While the code tries to handle this in the path below the err_unmap label it erroneously unmaps one entry from the sq's FIFO list of active mappings. Since the current map attempt failed this unmap is removing some random DMA mapping that might still be required. If the PCI function now presents that IOVA, the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI function in error state. The erroneous behavior was seen in a stress-test environment that created memory pressure.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_data_sem unlock order in ext4_ind_migrate() Fuzzing reports a possible deadlock in jbd2_log_wait_commit. This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require synchronous updates because the file descriptor is opened with O_SYNC. This can lead to the jbd2_journal_stop() function calling jbd2_might_wait_for_commit(), potentially causing a deadlock if the EXT4_IOC_MIGRATE call races with a write(2) system call. This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the jbd2_journal_stop function while i_data_sem is locked. This triggers lockdep because the jbd2_journal_start function might also lock the same jbd2_handle simultaneously. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Rule: add

In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext() Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`. With this, fix the following warning: elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]

In the Linux kernel, the following vulnerability has been resolved: exfat: fix memory leak in exfat_load_bitmap() If the first directory entry in the root directory is not a bitmap directory entry, 'bh' will not be released and reassigned, which will cause a memory leak.

In the Linux kernel, the following vulnerability has been resolved: ext4: dax: fix overflowing extents beyond inode size when partially writing The dax_iomap_rw() does two things in each iteration: map written blocks and copy user data to blocks. If the process is killed by user(See signal handling in dax_iomap_iter()), the copied data will be returned and added on inode size, which means that the length of written extents may exceed the inode size, then fsck will fail. An example is given as: dd if=/dev/urandom of=file bs=4M count=1 dax_iomap_rw iomap_iter // round 1 ext4_iomap_begin ext4_iomap_alloc // allocate 0~2M extents(written flag) dax_iomap_iter // copy 2M data iomap_iter // round 2 iomap_iter_advance iter->pos += iter->processed // iter->pos = 2M ext4_iomap_begin ext4_iomap_alloc // allocate 2~4M extents(written flag) dax_iomap_iter fatal_signal_pending done = iter->pos - iocb->ki_pos // done = 2M ext4_handle_inode_extension ext4_update_inode_size // inode size = 2M fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix? Fix the problem by truncating extents if the written length is smaller than expected.

In the Linux kernel, the following vulnerability has been resolved: net: Fix an unsafe loop on the list The kernel may crash when deleting a genetlink family if there are still listeners for that family: Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0 LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0 Call Trace: __netlink_clear_multicast_users+0x74/0xc0 genl_unregister_family+0xd4/0x2d0 Change the unsafe loop on the list to a safe one, because inside the loop there is an element removal from this list.

In the Linux kernel, the following vulnerability has been resolved: slip: make slhc_remember() more robust against malicious packets syzbot found that slhc_remember() was missing checks against malicious packets [1]. slhc_remember() only checked the size of the packet was at least 20, which is not good enough. We need to make sure the packet includes the IPv4 and TCP header that are supposed to be carried. Add iph and th pointers to make the code more readable. [1] BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455 ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline] ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212 ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024

In the Linux kernel, the following vulnerability has been resolved: ppp: fix ppp_async_encode() illegal access syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024

In the Linux kernel, the following vulnerability has been resolved: net/sched: accept TCA_STAB only for root qdisc Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_g ---truncated---

In the Linux kernel, the following vulnerability has been resolved: igb: Do not bring the device up after non-fatal error Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change rfcomm_sk_state_change attempts to use sock_lock so it must never be called with it locked but rfcomm_sock_ioctl always attempt to lock it causing the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted ------------------------------------------------------ syz-executor386/5093 is trying to acquire lock: ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline] ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73 but task is already holding lock: ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491

In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: fix panic with metadata_dst skb Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies() On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 00000000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before dereferencing se [WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove.

In the Linux kernel, the following vulnerability has been resolved: parport: Proper fix for array out-of-bounds access The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly.

In the Linux kernel, the following vulnerability has been resolved: blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait().

In the Linux kernel, the following vulnerability has been resolved: tcp: fix mptcp DSS corruption due to large pmtu xmit Syzkaller was able to trigger a DSS corruption: TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Modules linked in: CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff RSP: 0018:ffffc90000006db8 EFLAGS: 00010246 RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00 RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0 RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8 R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000 R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5 FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: move_skbs_to_msk net/mptcp/protocol.c:811 [inline] mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854 subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490 tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283 tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5662 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6107 __napi_poll+0xcb/0x490 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6962 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451 dev_queue_xmit include/linux/netdevice.h:3094 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline] tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752 __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015 tcp_push_pending_frames include/net/tcp.h:2107 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline] tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x214/0x350 net/core/sock.c:3072 release_sock+0x61/0x1f0 net/core/sock.c:3626 mptcp_push_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs

In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user.

In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Remove broken LDR (literal) uprobe support The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work.

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits 4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't enforce 32-byte alignment of nCR3. In the absolute worst case scenario, failure to ignore bits 4:0 can result in an out-of-bounds read, e.g. if the target page is at the end of a memslot, and the VMM isn't using guard pages. Per the APM: The CR3 register points to the base address of the page-directory-pointer table. The page-directory-pointer table is aligned on a 32-byte boundary, with the low 5 address bits 4:0 assumed to be 0. And the SDM's much more explicit: 4:0 Ignored Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow that is broken.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of buffer delay flag Syzbot reported that after nilfs2 reads a corrupted file system image and degrades to read-only, the BUG_ON check for the buffer delay flag in submit_bh_wbc() may fail, causing a kernel bug. This is because the buffer delay flag is not cleared when clearing the buffer state flags to discard a page/folio or a buffer head. So, fix this. This became necessary when the use of nilfs2's own page clear routine was expanded. This state inconsistency does not occur if the buffer is written normally by log writing.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Guard against bad data for ATIF ACPI method If a BIOS provides bad data in response to an ATIF method call this causes a NULL pointer dereference in the caller. ``` ? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1)) ? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434) ? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2)) ? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1)) ? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642) ? exc_page_fault (arch/x86/mm/fault.c:1542) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu ``` It has been encountered on at least one system, so guard for it. (cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee)

In the Linux kernel, the following vulnerability has been resolved: xfrm: validate new SA's prefixlen using SA family when sel.family is unset This expands the validation introduced in commit 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.") syzbot created an SA with usersa.sel.family = AF_UNSPEC usersa.sel.prefixlen_s = 128 usersa.family = AF_INET Because of the AF_UNSPEC selector, verify_newsa_info doesn't put limits on prefixlen_{s,d}. But then copy_from_user_state sets x->sel.family to usersa.family (AF_INET). Do the same conversion in verify_newsa_info before validating prefixlen_{s,d}, since that's how prefixlen is going to be used later on.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: fix wild-memory-access in proto_unregister There's issue as follows: KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f] CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W RIP: 0010:proto_unregister+0xee/0x400 Call Trace: __do_sys_delete_module+0x318/0x580 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init() will cleanup all resource. Then when remove bnep module will call bnep_sock_cleanup() to cleanup sock's resource. To solve above issue just return bnep_sock_init()'s return value in bnep_exit().

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmode should keep reference to parent The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOBs when building SMB2_IOCTL request When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb

In the Linux kernel, the following vulnerability has been resolved: be2net: fix potential memory leak in be_xmit() The be_xmit() returns NETDEV_TX_OK without freeing skb in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it.

In the Linux kernel, the following vulnerability has been resolved: net/sun3_82586: fix potential memory leak in sun3_82586_send_packet() The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it.

In the Linux kernel, the following vulnerability has been resolved: net: systemport: fix potential memory leak in bcm_sysport_xmit() The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it.

In the Linux kernel, the following vulnerability has been resolved: ceph: remove the incorrect Fw reference check when dirtying pages When doing the direct-io reads it will also try to mark pages dirty, but for the read path it won't hold the Fw caps and there is case will it get the Fw reference.

In the Linux kernel, the following vulnerability has been resolved: fbdev: sisfb: Fix strbuf array overflow The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: virtio_pmem: Check device status before requesting flush If a pmem device is in a bad status, the driver side could wait for host ack forever in virtio_pmem_flush(), causing the system to hang. So add a status check in the beginning of virtio_pmem_flush() to return early if the device is not activated.

In the Linux kernel, the following vulnerability has been resolved: mptcp: handle consistently DSS corruption Bugged peer implementation can send corrupted DSS options, consistently hitting a few warning in the data path. Use DEBUG_NET assertions, to avoid the splat on some builds and handle consistently the error, dumping related MIBs and performing fallback and/or reset according to the subflow type.

In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83869: fix memory corruption when enabling fiber When configuring the fiber port, the DP83869 PHY driver incorrectly calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit number (10). This corrupts some other memory location -- in case of arm64 the priv pointer in the same structure. Since the advertising flags are updated from supported at the end of the function the incorrect line isn't needed at all and can be removed.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't allow a VMOVP on a dying VPE Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/. Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case. This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor.

In the Linux kernel, the following vulnerability has been resolved: x86/entry_32: Clear CPU buffers after register restore in NMI return CPU buffers are currently cleared after call to exc_nmi, but before register state is restored. This may be okay for MDS mitigation but not for RDFS. Because RDFS mitigation requires CPU buffers to be cleared when registers don't have any sensitive data. Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI.

In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Fix uprobes for big-endian kernels The arm64 uprobes code is broken for big-endian kernels as it doesn't convert the in-memory instruction encoding (which is always little-endian) into the kernel's native endianness before analyzing and simulating instructions. This may result in a few distinct problems: * The kernel may may erroneously reject probing an instruction which can safely be probed. * The kernel may erroneously erroneously permit stepping an instruction out-of-line when that instruction cannot be stepped out-of-line safely. * The kernel may erroneously simulate instruction incorrectly dur to interpretting the byte-swapped encoding. The endianness mismatch isn't caught by the compiler or sparse because: * The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so the compiler and sparse have no idea these contain a little-endian 32-bit value. The core uprobes code populates these with a memcpy() which similarly does not handle endianness. * While the uprobe_opcode_t type is an alias for __le32, both arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[] to the similarly-named probe_opcode_t, which is an alias for u32. Hence there is no endianness conversion warning. Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and adding the appropriate __le32_to_cpu() conversions prior to consuming the instruction encoding. The core uprobes copies these fields as opaque ranges of bytes, and so is unaffected by this change. At the same time, remove MAX_UINSN_BYTES and consistently use AARCH64_INSN_SIZE for clarity. Tested with the following: | #include | #include | | #define noinline __attribute__((noinline)) | | static noinline void *adrp_self(void) | { | void *addr; | | asm volatile( | " adrp %x0, adrp_self\n" | " add %x0, %x0, :lo12:adrp_self\n" | : "=r" (addr)); | } | | | int main(int argc, char *argv) | { | void *ptr = adrp_self(); | bool equal = (ptr == adrp_self); | | printf("adrp_self => %p\n" | "adrp_self() => %p\n" | "%s\n", | adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL"); | | return 0; | } .... where the adrp_self() function was compiled to: | 00000000004007e0 : | 4007e0: 90000000 adrp x0, 400000 <__ehdr_start> | 4007e4: 911f8000 add x0, x0, #0x7e0 | 4007e8: d65f03c0 ret Before this patch, the ADRP is not recognized, and is assumed to be steppable, resulting in corruption of the result: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0xffffffffff7e0 | NOT EQUAL After this patch, the ADRP is correctly recognized and simulated: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL

In the Linux kernel, the following vulnerability has been resolved: posix-clock: Fix missing timespec64 check in pc_clock_settime() As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself.

In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6030: fix IIO device retrieval from embedded device The dev pointer that is received as an argument in the in_illuminance_period_available_show function references the device embedded in the IIO device, not in the i2c client. dev_to_iio_dev() must be used to accessthe right data. The current implementation leads to a segmentation fault on every attempt to read the attribute because indio_dev gets a NULL assignment. This bug has been present since the first appearance of the driver, apparently since the last version (V6) before getting applied. A constant attribute was used until then, and the last modifications might have not been tested again.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix encoder->possible_clones Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly. This results in some warnings during driver initialization: Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7) WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c ... (cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db)

In the Linux kernel, the following vulnerability has been resolved: nilfs2: propagate directory read errors from nilfs_find_entry() Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2. The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails. If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts. Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry(). The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together.

In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size() The step variable is initialized to zero. It is changed in the loop, but if it's not changed it will remain zero. Add a variable check before the division. The observed behavior was introduced by commit 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"), and it is difficult to show that any of the interval parameters will satisfy the snd_interval_test() condition with data from the amdtp_rate_table[] table. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages Avoid memory corruption while setting up Level-2 PBL pages for the non MR resources when num_pages > 256K. There will be a single PDE page address (contiguous pages in the case of > PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid memory access after 256K PBL entries in the PDE.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a check for memory allocation __alloc_pbl() can return error when memory allocation fails. Driver is not checking the status on one of the instances.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential deadlock with newly created symlinks Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock. This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem(). This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held: Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of checked flag Syzbot reported that in directory operations after nilfs2 detects filesystem corruption and degrades to read-only, __block_write_begin_int(), which is called to prepare block writes, may fail the BUG_ON check for accesses exceeding the folio/page size, triggering a kernel bug. This was found to be because the "checked" flag of a page/folio was not cleared when it was discarded by nilfs2's own routine, which causes the sanity check of directory entries to be skipped when the directory page/folio is reloaded. So, fix that. This was necessary when the use of nilfs2's own page discard routine was applied to more than just metadata files.

In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: Fix memory leak in management tx In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic. Kmemleak reports this problem as below, unreferenced object 0xffffff80b64ed250 (size 16): comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes): 00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t...... backtrace: [] __kmem_cache_alloc_node+0x1e4/0x2d8 [] kmalloc_trace+0x48/0x110 [] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core] [] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core] [] process_scheduled_works+0x1ac/0x400 [] worker_thread+0x208/0x328 [] kthread+0x100/0x1c0 [] ret_from_fork+0x10/0x20 Free the memory during completion and cleanup to fix the leak. Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower Avoid potentially crashing in the driver because of uninitialized private data

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds write in trie_get_next_key() trie_get_next_key() allocates a node stack with size trie->max_prefixlen, while it writes (trie->max_prefixlen + 1) nodes to the stack when it has full paths from the root to leaves. For example, consider a trie with max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ... 0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with .prefixlen = 8 make 9 nodes be written on the node stack with size 8.

In the Linux kernel, the following vulnerability has been resolved: net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT). In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop. net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() 1. The size of the response packet is not validated. 2. The response buffer is not freed. Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer.