Уязвимость функции gtp_dev_xmit() модуля drivers/net/gtp.c ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функций select_local_address() и select_signal_address компонента mptcp ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции dequeue_rx() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_xmit() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_finish_output2 ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: tracing: Have format file honor EVENT_FILE_FL_FREED When eventfs was introduced, special care had to be done to coordinate the freeing of the file meta data with the files that are exposed to user space. The file meta data would have a ref count that is set when the file is created and would be decremented and freed after the last user that opened the file closed it. When the file meta data was to be freed, it would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed, and any new references made (like new opens or reads) would fail as it is marked freed. This allowed other meta data to be freed after this flag was set (under the event_mutex). All the files that were dynamically created in the events directory had a pointer to the file meta data and would call event_release() when the last reference to the user space file was closed. This would be the time that it is safe to free the file meta data. A shortcut was made for the "format" file. It's i_private would point to the "call" entry directly and not point to the file's meta data. This is because all format files are the same for the same "call", so it was thought there was no reason to differentiate them. The other files maintain state (like the "enable", "trigger", etc). But this meant if the file were to disappear, the "format" file would be unaware of it. This caused a race that could be trigger via the user_events test (that would create dynamic events and free them), and running a loop that would read the user_events format files: In one console run: # cd tools/testing/selftests/user_events # while true; do ./ftrace_test; done And in another console run: # cd /sys/kernel/tracing/ # while true; do cat events/user_events/__test_event/format; done 2>/dev/null With KASAN memory checking, it would trigger a use-after-free bug report (which was a real bug). This was because the format file was not checking the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the event that the file meta data pointed to after the event was freed. After inspection, there are other locations that were found to not check the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a new helper function: event_file_file() that will make sure that the event_mutex is held, and will return NULL if the trace_event_file has the EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file pointer use event_file_file() and check for NULL. Later uses can still use the event_file_data() helper function if the event_mutex is still held and was not released since the event_file_file() call.

In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: avoid possible UaF when selecting endp select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate vlan header Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline]

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UAF in ip6_xmit() If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in ip6_finish_output2() If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent UAF in ip6_send_skb() syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80

In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start ¦ ? ...... setup tc ¦ ¦ ? ? DOWN: napi_disable() napi_disable()(skip) ¦ ¦ ¦ ? ? ...... ...... ¦ ¦ ? ¦ napi_enable() ¦ ? UINIT: netif_napi_del() ¦ ? ...... ¦ ? INIT: netif_napi_add() ¦ ? ...... global reset start ¦ ¦ ? ? UP: napi_enable()(skip) ...... ¦ ¦ ? ? ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it.

In the Linux kernel, the following vulnerability has been resolved: vsock: fix recursive ->recvmsg calls After a vsock socket has been added to a BPF sockmap, its prot->recvmsg has been replaced with vsock_bpf_recvmsg(). Thus the following recursiion could happen: vsock_bpf_recvmsg() -> __vsock_recvmsg() -> vsock_connectible_recvmsg() -> prot->recvmsg() -> vsock_bpf_recvmsg() again We need to fix it by calling the original ->recvmsg() without any BPF sockmap logic in __vsock_recvmsg().

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_wed: fix use-after-free panic in mtk_wed_setup_tc_block_cb() When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... ---------

In the Linux kernel, the following vulnerability has been resolved: atm: idt77252: prevent use after free in dequeue_rx() We can't dereference "skb" after calling vcc->push() because the skb is released.

In the Linux kernel, the following vulnerability has been resolved: gtp: pull network headers in gtp_dev_xmit() syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.

In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only decrement add_addr_accepted for MPJ req Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before.

In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints.

In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: use dma non-coherent allocator Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/

In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: initialise extack before use Fix missing initialisation of extack in flow offload.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Take state lock during tx timeout reporter mlx5e_safe_reopen_channels() requires the state lock taken. The referenced changed in the Fixes tag removed the lock to fix another issue. This patch adds it back but at a later point (when calling mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the Fixes tag.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a kernel verifier crash in stacksafe() Daniel Hodges reported a kernel verifier crash when playing with sched-ext. Further investigation shows that the crash is due to invalid memory access in stacksafe(). More specifically, it is the following code: if (exact != NOT_EXACT && old->stack[spi].slot_type[i % BPF_REG_SIZE] != cur->stack[spi].slot_type[i % BPF_REG_SIZE]) return false; The 'i' iterates old->allocated_stack. If cur->allocated_stack < old->allocated_stack the out-of-bound access will happen. To fix the issue add 'i >= cur->allocated_stack' check such that if the condition is true, stacksafe() should fail. Otherwise, cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal.

In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane).

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0 The __vmap_pages_range_noflush() assumes its argument pages** contains pages with the same page shift. However, since commit e9c3cda4d86e ("mm, vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes __GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation failed for high order, the pages** may contain two different page shifts (high order and order-0). This could lead __vmap_pages_range_noflush() to perform incorrect mappings, potentially resulting in memory corruption. Users might encounter this as follows (vmap_allow_huge = true, 2M is for PMD_SIZE): kvmalloc(2M, __GFP_NOFAIL|GFP_X) __vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP) vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0 vmap_pages_range() vmap_pages_range_noflush() __vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens We can remove the fallback code because if a high-order allocation fails, __vmalloc_node_range_noprof() will retry with order-0. Therefore, it is unnecessary to fallback to order-0 here. Therefore, fix this by removing the fallback code.

In the Linux kernel, the following vulnerability has been resolved: fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case.

In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_test: Fix NULL dereference on allocation failure If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success.

In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: Do not mark ACPI devices as irq safe On ACPI machines, the tegra i2c module encounters an issue due to a mutex being called inside a spinlock. This leads to the following bug: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 ... Call trace: __might_sleep __mutex_lock_common mutex_lock_nested acpi_subsys_runtime_resume rpm_resume tegra_i2c_xfer The problem arises because during __pm_runtime_resume(), the spinlock &dev->power.lock is acquired before rpm_resume() is called. Later, rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on mutexes, triggering the error. To address this issue, devices on ACPI are now marked as not IRQ-safe, considering the dependency of acpi_subsys_runtime_resume() on mutexes.

In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID.

In the Linux kernel, the following vulnerability has been resolved: scsi: aacraid: Fix double-free on probe failure aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: st: fix probed platform device ref count on probe error path The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Prevent USB core invalid event buffer address access This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address.

In the Linux kernel, the following vulnerability has been resolved: gtp: fix a potential NULL pointer dereference When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.)

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference in pcs_get_function() pinmux_generic_get_function() can return NULL and the pointer 'function' was dereferenced without checking against NULL. Add checking of pointer 'function' in pcs_get_function(). Found by code review.

In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid dereferencing rdata=NULL in smb2_new_read_req() This happens when called from SMB2_read() while using rdma and reaching the rdma_readwrite_threshold.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a use-after-free when hitting errors inside btrfs_submit_chunk() [BUG] There is an internal report that KASAN is reporting use-after-free, with the following backtrace: BUG: KASAN: slab-use-after-free in btrfs_check_read_bio+0xa68/0xb70 [btrfs] Read of size 4 at addr ffff8881117cec28 by task kworker/u16:2/45 CPU: 1 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.11.0-rc2-next-20240805-default+ #76 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x5e/0x2f0 print_report+0x118/0x216 kasan_report+0x11d/0x1f0 btrfs_check_read_bio+0xa68/0xb70 [btrfs] process_one_work+0xce0/0x12a0 worker_thread+0x717/0x1250 kthread+0x2e3/0x3c0 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 Allocated by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x7d/0x80 kmem_cache_alloc_noprof+0x16e/0x3e0 mempool_alloc_noprof+0x12e/0x310 bio_alloc_bioset+0x3f0/0x7a0 btrfs_bio_alloc+0x2e/0x50 [btrfs] submit_extent_page+0x4d1/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x4b/0x60 kmem_cache_free+0x214/0x5d0 bio_free+0xed/0x180 end_bbio_data_read+0x1cc/0x580 [btrfs] btrfs_submit_chunk+0x98d/0x1880 [btrfs] btrfs_submit_bio+0x33/0x70 [btrfs] submit_one_bio+0xd4/0x130 [btrfs] submit_extent_page+0x3ea/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [CAUSE] Although I cannot reproduce the error, the report itself is good enough to pin down the cause. The call trace is the regular endio workqueue context, but the free-by-task trace is showing that during btrfs_submit_chunk() we already hit a critical error, and is calling btrfs_bio_end_io() to error out. And the original endio function called bio_put() to free the whole bio. This means a double freeing thus causing use-after-free, e.g.: 1. Enter btrfs_submit_bio() with a read bio The read bio length is 128K, crossing two 64K stripes. 2. The first run of btrfs_submit_chunk() 2.1 Call btrfs_map_block(), which returns 64K 2.2 Call btrfs_split_bio() Now there are two bios, one referring to the first 64K, the other referring to the second 64K. 2.3 The first half is submitted. 3. The second run of btrfs_submit_chunk() 3.1 Call btrfs_map_block(), which by somehow failed Now we call btrfs_bio_end_io() to handle the error 3.2 btrfs_bio_end_io() calls the original endio function Which is end_bbio_data_read(), and it calls bio_put() for the original bio. Now the original bio is freed. 4. The submitted first 64K bio finished Now we call into btrfs_check_read_bio() and tries to advance the bio iter. But since the original bio (thus its iter) is already freed, we trigger the above use-after free. And even if the memory is not poisoned/corrupted, we will later call the original endio function, causing a double freeing. [FIX] Instead of calling btrfs_bio_end_io(), call btrfs_orig_bbio_end_io(), which has the extra check on split bios and do the pr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Mark get_wq_ctx() as atomic call Currently get_wq_ctx() is wrongly configured as a standard call. When two SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to resume the corresponding sleeping thread. But if get_wq_ctx() is interrupted, goes to sleep and another SMC call is waiting to be allocated a waitq context, it leads to a deadlock. To avoid this get_wq_ctx() must be an atomic call and can't be a standard SMC call. Hence mark get_wq_ctx() as a fast call.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink: Fix race during initialization As pointed out by Stephen Boyd it is possible that during initialization of the pmic_glink child drivers, the protection-domain notifiers fires, and the associated work is scheduled, before the client registration returns and as a result the local "client" pointer has been initialized. The outcome of this is a NULL pointer dereference as the "client" pointer is blindly dereferenced. Timeline provided by Stephen: CPU0 CPU1 ---- ---- ucsi->client = NULL; devm_pmic_glink_register_client() client->pdr_notify(client->priv, pg->client_state) pmic_glink_ucsi_pdr_notify() schedule_work(&ucsi->register_work) pmic_glink_ucsi_register() ucsi_register() pmic_glink_ucsi_read_version() pmic_glink_ucsi_read() pmic_glink_ucsi_read() pmic_glink_send(ucsi->client) ucsi->client = client // Too late! This code is identical across the altmode, battery manager and usci child drivers. Resolve this by splitting the allocation of the "client" object and the registration thereof into two operations. This only happens if the protection domain registry is populated at the time of registration, which by the introduction of commit '1ebcde047c54 ("soc: qcom: add pd-mapper implementation")' became much more likely.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. (cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3)

In the Linux kernel, the following vulnerability has been resolved: selinux,smack: don't bypass permissions check in inode_setsecctx hook Marek Gresko reports that the root user on an NFS client is able to change the security labels on files on an NFS filesystem that is exported with root squashing enabled. The end of the kerneldoc comment for __vfs_setxattr_noperm() states: * This function requires the caller to lock the inode's i_mutex before it * is executed. It also assumes that the caller will make the appropriate * permission checks. nfsd_setattr() does do permissions checking via fh_verify() and nfsd_permission(), but those don't do all the same permissions checks that are done by security_inode_setxattr() and its related LSM hooks do. Since nfsd_setattr() is the only consumer of security_inode_setsecctx(), simplest solution appears to be to replace the call to __vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This fixes the above issue and has the added benefit of causing nfsd to recall conflicting delegations on a file when a client tries to change its security label.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Mark XDomain as unplugged when router is removed I noticed that when we do discrete host router NVM upgrade and it gets hot-removed from the PCIe side as a result of NVM firmware authentication, if there is another host connected with enabled paths we hang in tearing them down. This is due to fact that the Thunderbolt networking driver also tries to cleanup the paths and ends up blocking in tb_disconnect_xdomain_paths() waiting for the domain lock. However, at this point we already cleaned the paths in tb_stop() so there is really no need for tb_disconnect_xdomain_paths() to do that anymore. Furthermore it already checks if the XDomain is unplugged and bails out early so take advantage of that and mark the XDomain as unplugged when we remove the parent router.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: mark last busy before uart_add_one_port With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel sometimes boot hang. It is because normal console still is not ready, but runtime suspend is called, so early console putchar will hang in waiting TRDE set in UARTSTAT. The lpuart driver has auto suspend delay set to 3000ms, but during uart_add_one_port, a child device serial ctrl will added and probed with its pm runtime enabled(see serial_ctrl.c). The runtime suspend call path is: device_add |-> bus_probe_device |->device_initial_probe |->__device_attach |-> pm_runtime_get_sync(dev->parent); |-> pm_request_idle(dev); |-> pm_runtime_put(dev->parent); So in the end, before normal console ready, the lpuart get runtime suspended. And earlycon putchar will hang. To address the issue, mark last busy just after pm_runtime_enable, three seconds is long enough to switch from bootconsole to normal console.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix prime with external buffers Make sure that for external buffers mapping goes through the dma_buf interface instead of trying to access pages directly. External buffers might not provide direct access to readable/writable pages so to make sure the bo's created from external dma_bufs can be read dma_buf interface has to be used. Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't trigger this due to the fact that virtual machines will not have multiple GPUs but it enables better test coverage in IGT.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix ID 0 endp usage after multiple re-creations 'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix null pointer dereference in trace ucsi_register_altmode checks IS_ERR for the alt pointer and treats NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled, ucsi_register_displayport returns NULL which causes a NULL pointer dereference in trace. Rather than return NULL, call typec_port_register_altmode to register DisplayPort alternate mode as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix dereference after null check check the pointer hive before use.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix possible NULL pointer dereference profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mc_data out-of-bounds read warning Clear warning that read mc_data[i-1] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ucode out-of-bounds read warning Clear warning that read ucode[] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds read of df_v1_7_channel_number Check the fb_channel_number range to avoid the array out-of-bounds read error

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds write warning Check the ring type value to fix the out-of-bounds write warning

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Ensure index calculation will not overflow [WHY & HOW] Make sure vmid0p72_idx, vnom0p8_idx and vmax0p9_idx calculation will never overflow and exceess array size. This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery() When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference issue. Fix it by adding the check in ublk_ctrl_start_recovery() and return immediately in case of zero 'ub->nr_queues_ready'. BUG: kernel NULL pointer dereference, address: 0000000000000028 RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180 Call Trace: ? __die+0x20/0x70 ? page_fault_oops+0x75/0x170 ? exc_page_fault+0x64/0x140 ? asm_exc_page_fault+0x22/0x30 ? ublk_ctrl_start_recovery.constprop.0+0x82/0x180 ublk_ctrl_uring_cmd+0x4f7/0x6c0 ? pick_next_task_idle+0x26/0x40 io_uring_cmd+0x9a/0x1b0 io_issue_sqe+0x193/0x3f0 io_wq_submit_work+0x9b/0x390 io_worker_handle_work+0x165/0x360 io_wq_worker+0xcb/0x2f0 ? finish_task_switch.isra.0+0x203/0x290 ? finish_task_switch.isra.0+0x203/0x290 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix kernel crash if commands allocation fails If the commands allocation fails in nvmet_tcp_alloc_cmds() the kernel crashes in nvmet_tcp_release_queue_work() because of a NULL pointer dereference. nvmet: failed to install queue 0 cntlid 1 ret 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Fix the bug by setting queue->nr_cmds to zero in case nvmet_tcp_alloc_cmd() fails.

In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix use-after-free when removing resource in vmci_resource_remove() When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove().

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind For primary VM Bus channels, primary_channel pointer is always NULL. This pointer is valid only for the secondary channels. Also, rescind callback is meant for primary channels only. Fix NULL pointer dereference by retrieving the device_obj from the parent for the primary channel.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF caused by offsets overwrite Binder objects are processed and copied individually into the target buffer during transactions. Any raw data in-between these objects is copied as well. However, this raw data copy lacks an out-of-bounds check. If the raw data exceeds the data section size then the copy overwrites the offsets section. This eventually triggers an error that attempts to unwind the processed objects. However, at this point the offsets used to index these objects are now corrupted. Unwinding with corrupted offsets can result in decrements of arbitrary nodes and lead to their premature release. Other users of such nodes are left with a dangling pointer triggering a use-after-free. This issue is made evident by the following KASAN report (trimmed): ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff47fc91598f04 by task binder-util/743 CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_free_buf+0x128/0x434 binder_thread_write+0x8a4/0x3260 binder_ioctl+0x18f0/0x258c [...] Allocated by task 743: __kmalloc_cache_noprof+0x110/0x270 binder_new_node+0x50/0x700 binder_transaction+0x413c/0x6da8 binder_thread_write+0x978/0x3260 binder_ioctl+0x18f0/0x258c [...] Freed by task 745: kfree+0xbc/0x208 binder_thread_read+0x1c5c/0x37d4 binder_ioctl+0x16d8/0x258c [...] ================================================================== To avoid this issue, let's check that the raw data copy is within the boundaries of the data section.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix double free of 'buf' in error path smatch warning: drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf' In fastrpc_req_mmap() error path, the fastrpc buffer is freed in fastrpc_req_munmap_impl() if unmap is successful. But in the end, there is an unconditional call to fastrpc_buf_free(). So the above case triggers the double free of fastrpc buf.

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open() null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) and parse_lease_state() return NULL. Fix this by check if 'lease_ctx_info' is NULL. Additionally, remove the redundant parentheses in parse_durable_handle_context().

In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size.

In the Linux kernel, the following vulnerability has been resolved: HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush() This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open The mcp251x_hw_wake() function is called with the mpc_lock mutex held and disables the interrupt handler so that no interrupts can be processed while waking the device. If an interrupt has already occurred then waiting for the interrupt handler to complete will deadlock because it will be trying to acquire the same mutex. CPU0 CPU1 ---- ---- mcp251x_open() mutex_lock(&priv->mcp_lock) request_threaded_irq() mcp251x_can_ist() mutex_lock(&priv->mcp_lock) mcp251x_hw_wake() disable_irq() <-- deadlock Use disable_irq_nosync() instead because the interrupt handler does everything while holding the mutex so it doesn't matter if it's still running.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset the binding mark of a reused connection Steve French reported null pointer dereference error from sha256 lib. cifs.ko can send session setup requests on reused connection. If reused connection is used for binding session, conn->binding can still remain true and generate_preauth_hash() will not set sess->Preauth_HashValue and it will be NULL. It is used as a material to create an encryption key in ksmbd_gen_smb311_encryptionkey. ->Preauth_HashValue cause null pointer dereference error from crypto_shash_update(). BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 8 PID: 429254 Comm: kworker/8:39 Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET69W (1.52 ) Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] RIP: 0010:lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? do_user_addr_fault+0x2ee/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] _sha256_update+0x77/0xa0 [sha256_ssse3] sha256_avx2_update+0x15/0x30 [sha256_ssse3] crypto_shash_update+0x1e/0x40 hmac_update+0x12/0x20 crypto_shash_update+0x1e/0x40 generate_key+0x234/0x380 [ksmbd] generate_smb3encryptionkey+0x40/0x1c0 [ksmbd] ksmbd_gen_smb311_encryptionkey+0x72/0xa0 [ksmbd] ntlm_authenticate.isra.0+0x423/0x5d0 [ksmbd] smb2_sess_setup+0x952/0xaa0 [ksmbd] __process_request+0xa3/0x1d0 [ksmbd] __handle_ksmbd_work+0x1c4/0x2f0 [ksmbd] handle_ksmbd_work+0x2d/0xa0 [ksmbd] process_one_work+0x16c/0x350 worker_thread+0x306/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xef/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x44/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double put of @cfile in smb2_set_path_size() If smb2_compound_op() is called with a valid @cfile and returned -EINVAL, we need to call cifs_get_writable_path() before retrying it as the reference of @cfile was already dropped by previous call. This fixes the following KASAN splat when running fstests generic/013 against Windows Server 2022: CIFS: Attempting to mount //w22-fs0/scratch run fstests generic/013 at 2024-09-02 19:48:59 ================================================================== BUG: KASAN: slab-use-after-free in detach_if_pending+0xab/0x200 Write of size 8 at addr ffff88811f1a3730 by task kworker/3:2/176 CPU: 3 UID: 0 PID: 176 Comm: kworker/3:2 Not tainted 6.11.0-rc6 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: cifsoplockd cifs_oplock_break [cifs] Call Trace: dump_stack_lvl+0x5d/0x80 ? detach_if_pending+0xab/0x200 print_report+0x156/0x4d9 ? detach_if_pending+0xab/0x200 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? detach_if_pending+0xab/0x200 kasan_report+0xda/0x110 ? detach_if_pending+0xab/0x200 detach_if_pending+0xab/0x200 timer_delete+0x96/0xe0 ? __pfx_timer_delete+0x10/0x10 ? rcu_is_watching+0x20/0x50 try_to_grab_pending+0x46/0x3b0 __cancel_work+0x89/0x1b0 ? __pfx___cancel_work+0x10/0x10 ? kasan_save_track+0x14/0x30 cifs_close_deferred_file+0x110/0x2c0 [cifs] ? __pfx_cifs_close_deferred_file+0x10/0x10 [cifs] ? __pfx_down_read+0x10/0x10 cifs_oplock_break+0x4c1/0xa50 [cifs] ? __pfx_cifs_oplock_break+0x10/0x10 [cifs] ? lock_is_held_type+0x85/0xf0 ? mark_held_locks+0x1a/0x90 process_one_work+0x4c6/0x9f0 ? find_held_lock+0x8a/0xa0 ? __pfx_process_one_work+0x10/0x10 ? lock_acquired+0x220/0x550 ? __list_add_valid_or_report+0x37/0x100 worker_thread+0x2e4/0x570 ? __kthread_parkme+0xd1/0xf0 ? __pfx_worker_thread+0x10/0x10 kthread+0x17f/0x1c0 ? kthread+0xda/0x1c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Allocated by task 1118: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 cifs_new_fileinfo+0xc8/0x9d0 [cifs] cifs_atomic_open+0x467/0x770 [cifs] lookup_open.isra.0+0x665/0x8b0 path_openat+0x4c3/0x1380 do_filp_open+0x167/0x270 do_sys_openat2+0x129/0x160 __x64_sys_creat+0xad/0xe0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 83: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 poison_slab_object+0xe9/0x160 __kasan_slab_free+0x32/0x50 kfree+0xf2/0x300 process_one_work+0x4c6/0x9f0 worker_thread+0x2e4/0x570 kthread+0x17f/0x1c0 ret_from_fork+0x31/0x60 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x30/0x50 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x29/0xe0 __queue_work+0x5ea/0x760 queue_work_on+0x6d/0x90 _cifsFileInfo_put+0x3f6/0x770 [cifs] smb2_compound_op+0x911/0x3940 [cifs] smb2_set_path_size+0x228/0x270 [cifs] cifs_set_file_size+0x197/0x460 [cifs] cifs_setattr+0xd9c/0x14b0 [cifs] notify_change+0x4e3/0x740 do_truncate+0xfa/0x180 vfs_truncate+0x195/0x200 __x64_sys_truncate+0x109/0x150 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: powerpc/qspinlock: Fix deadlock in MCS queue If an interrupt occurs in queued_spin_lock_slowpath() after we increment qnodesp->count and before node->lock is initialized, another CPU might see stale lock values in get_tail_qnode(). If the stale lock value happens to match the lock on that CPU, then we write to the "next" pointer of the wrong qnode. This causes a deadlock as the former CPU, once it becomes the head of the MCS queue, will spin indefinitely until it's "next" pointer is set by its successor in the queue. Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in occasional lockups similar to the following: $ stress-ng --all 128 --vm-bytes 80% --aggressive \ --maximize --oomable --verify --syslog \ --metrics --times --timeout 5m watchdog: CPU 15 Hard LOCKUP ...... NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 Call Trace: 0xc000002cfffa3bf0 (unreliable) _raw_spin_lock+0x6c/0x90 raw_spin_rq_lock_nested.part.135+0x4c/0xd0 sched_ttwu_pending+0x60/0x1f0 __flush_smp_call_function_queue+0x1dc/0x670 smp_ipi_demux_relaxed+0xa4/0x100 xive_muxed_ipi_action+0x20/0x40 __handle_irq_event_percpu+0x80/0x240 handle_irq_event_percpu+0x2c/0x80 handle_percpu_irq+0x84/0xd0 generic_handle_irq+0x54/0x80 __do_irq+0xac/0x210 __do_IRQ+0x74/0xd0 0x0 do_IRQ+0x8c/0x170 hardware_interrupt_common_virt+0x29c/0x2a0 --- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490 ...... NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 --- interrupt: 500 0xc0000029c1a41d00 (unreliable) _raw_spin_lock+0x6c/0x90 futex_wake+0x100/0x260 do_futex+0x21c/0x2a0 sys_futex+0x98/0x270 system_call_exception+0x14c/0x2f0 system_call_vectored_common+0x15c/0x2ec The following code flow illustrates how the deadlock occurs. For the sake of brevity, assume that both locks (A and B) are contended and we call the queued_spin_lock_slowpath() function. CPU0 CPU1 ---- ---- spin_lock_irqsave(A) | spin_unlock_irqrestore(A) | spin_lock(B) | | | ? | id = qnodesp->count++; | (Note that nodes[0].lock == A) | | | ? | Interrupt | (happens before "nodes[0].lock = B") | | | ? | spin_lock_irqsave(A) | | | ? | id = qnodesp->count++ | nodes[1].lock = A | | | ? | Tail of MCS queue | | spin_lock_irqsave(A) ? | Head of MCS queue ? | CPU0 is previous tail ? | Spin indefinitely ? (until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0) | ? prev == &qnodes[CPU0].nodes[0] (as qnodes ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object When using kernel with the following extra config, - CONFIG_KASAN=y - CONFIG_KASAN_GENERIC=y - CONFIG_KASAN_INLINE=y - CONFIG_KASAN_VMALLOC=y - CONFIG_FRAME_WARN=4096 kernel detects that snd_pcm_suspend_all() access a freed 'snd_soc_pcm_runtime' object when the system is suspended, which leads to a use-after-free bug: [ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270 [ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330 [ 52.047785] Call trace: [ 52.047787] dump_backtrace+0x0/0x3c0 [ 52.047794] show_stack+0x34/0x50 [ 52.047797] dump_stack_lvl+0x68/0x8c [ 52.047802] print_address_description.constprop.0+0x74/0x2c0 [ 52.047809] kasan_report+0x210/0x230 [ 52.047815] __asan_report_load1_noabort+0x3c/0x50 [ 52.047820] snd_pcm_suspend_all+0x1a8/0x270 [ 52.047824] snd_soc_suspend+0x19c/0x4e0 The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before making any access. So we need to always set 'substream->runtime' to NULL everytime we kfree() it.

In the Linux kernel, the following vulnerability has been resolved: sch/netem: fix use after free in netem_dequeue If netem_dequeue() enqueues packet to inner qdisc and that qdisc returns __NET_XMIT_STOLEN. The packet is dropped but qdisc_tree_reduce_backlog() is not called to update the parent's q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue fails") Commands to trigger KASAN UaF: ip link add type dummy ip link set lo up ip link set dummy0 up tc qdisc add dev lo parent root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2: handle 3: drr tc filter add dev lo parent 3: basic classid 3:1 action mirred egress redirect dev dummy0 tc class add dev lo classid 3:1 drr ping -c1 -W0.01 localhost # Trigger bug tc class del dev lo classid 1:1 tc class add dev lo classid 1:1 drr ping -c1 -W0.01 localhost # UaF