Уязвимость функции gtp_dev_xmit() модуля drivers/net/gtp.c ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции dequeue_rx() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_xmit() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_finish_output2 ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции fcntl_setlk() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix null pointer deref when receiving skb during sock creation The panic below is observed when receiving ICMP packets with secmark set while an ICMP raw socket is being created. SK_CTX(sk)->label is updated in apparmor_socket_post_create(), but the packet is delivered to the socket before that, causing the null pointer dereference. Drop the packet if label context is not set. BUG: kernel NULL pointer dereference, address: 000000000000004c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020 RIP: 0010:aa_label_next_confined+0xb/0x40 Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2 RSP: 0018:ffffa92940003b08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002 R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0 PKRU: 55555554 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? aa_label_next_confined+0xb/0x40 apparmor_secmark_check+0xec/0x330 security_sock_rcv_skb+0x35/0x50 sk_filter_trim_cap+0x47/0x250 sock_queue_rcv_skb_reason+0x20/0x60 raw_rcv+0x13c/0x210 raw_local_deliver+0x1f3/0x250 ip_protocol_deliver_rcu+0x4f/0x2f0 ip_local_deliver_finish+0x76/0xa0 __netif_receive_skb_one_core+0x89/0xa0 netif_receive_skb+0x119/0x170 ? __netdev_alloc_skb+0x3d/0x140 vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] __napi_poll+0x28/0x1b0 net_rx_action+0x2a4/0x380 __do_softirq+0xd1/0x2c8 __irq_exit_rcu+0xbb/0xf0 common_interrupt+0x86/0xa0 asm_common_interrupt+0x26/0x40 RIP: 0010:apparmor_socket_post_create+0xb/0x200 Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48 RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286 RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003 R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748 ? __pfx_apparmor_socket_post_create+0x10/0x10 security_socket_post_create+0x4b/0x80 __sock_create+0x176/0x1f0 __sys_socket+0x89/0x100 __x64_sys_socket+0x17/0x20 do_syscall_64+0x5d/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: filelock: Remove locks reliably when fcntl/close race is detected When fcntl_setlk() races with close(), it removes the created lock with do_lock_file_wait(). However, LSMs can allow the first do_lock_file_wait() that created the lock while denying the second do_lock_file_wait() that tries to remove the lock. Separately, posix_lock_file() could also fail to remove a lock due to GFP_KERNEL allocation failure (when splitting a range in the middle). After the bug has been triggered, use-after-free reads will occur in lock_get_status() when userspace reads /proc/locks. This can likely be used to read arbitrary kernel memory, but can't corrupt kernel memory. Fix it by calling locks_remove_posix() instead, which is designed to reliably get rid of POSIX locks associated with the given file and files_struct and is also used by filp_flush().

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600 Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109 CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566 Call Trace: kasan_report+0x93/0xc0 cachefiles_withdraw_cookie+0x4d9/0x600 fscache_cookie_state_machine+0x5c8/0x1230 fscache_cookie_worker+0x91/0x1c0 process_one_work+0x7fa/0x1800 [...] Allocated by task 117: kmalloc_trace+0x1b3/0x3c0 cachefiles_acquire_volume+0xf3/0x9c0 fscache_create_volume_work+0x97/0x150 process_one_work+0x7fa/0x1800 [...] Freed by task 120301: kfree+0xf1/0x2c0 cachefiles_withdraw_cache+0x3fa/0x920 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 do_exit+0x87a/0x29b0 [...] ================================================================== Following is the process that triggers the issue: p1 | p2 ------------------------------------------------------------ fscache_begin_lookup fscache_begin_volume_access fscache_cache_is_live(fscache_cache) cachefiles_daemon_release cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache fscache_withdraw_cache fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN); cachefiles_withdraw_objects(cache) fscache_wait_for_objects(fscache) atomic_read(&fscache_cache->object_count) == 0 fscache_perform_lookup cachefiles_lookup_cookie cachefiles_alloc_object refcount_set(&object->ref, 1); object->volume = volume fscache_count_object(vcookie->cache); atomic_inc(&fscache_cache->object_count) cachefiles_withdraw_volumes cachefiles_withdraw_volume fscache_withdraw_volume __cachefiles_free_volume kfree(cachefiles_volume) fscache_cookie_state_machine cachefiles_withdraw_cookie cache = object->volume->cache; // cachefiles_volume UAF !!! After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups to complete first, and then wait for fscache_cache->object_count == 0 to avoid the cookie exiting after the volume has been freed and triggering the above issue. Therefore call fscache_withdraw_volume() before calling cachefiles_withdraw_objects(). This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two cases will occur: 1) fscache_begin_lookup fails in fscache_begin_volume_access(). 2) fscache_withdraw_volume() will ensure that fscache_count_object() has been executed before calling fscache_wait_for_objects().

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in fscache_withdraw_volume() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in fscache_withdraw_volume+0x2e1/0x370 Read of size 4 at addr ffff88810680be08 by task ondemand-04-dae/5798 CPU: 0 PID: 5798 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #565 Call Trace: kasan_check_range+0xf6/0x1b0 fscache_withdraw_volume+0x2e1/0x370 cachefiles_withdraw_volume+0x31/0x50 cachefiles_withdraw_cache+0x3ad/0x900 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 Allocated by task 5820: __kmalloc+0x1df/0x4b0 fscache_alloc_volume+0x70/0x600 __fscache_acquire_volume+0x1c/0x610 erofs_fscache_register_volume+0x96/0x1a0 erofs_fscache_register_fs+0x49a/0x690 erofs_fc_fill_super+0x6c0/0xcc0 vfs_get_super+0xa9/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] Freed by task 5820: kfree+0xf1/0x2c0 fscache_put_volume.part.0+0x5cb/0x9e0 erofs_fscache_unregister_fs+0x157/0x1b0 erofs_kill_sb+0xd9/0x1c0 deactivate_locked_super+0xa3/0x100 vfs_get_super+0x105/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] ================================================================== Following is the process that triggers the issue: mount failed | daemon exit ------------------------------------------------------------ deactivate_locked_super cachefiles_daemon_release erofs_kill_sb erofs_fscache_unregister_fs fscache_relinquish_volume __fscache_relinquish_volume fscache_put_volume(fscache_volume, fscache_volume_put_relinquish) zero = __refcount_dec_and_test(&fscache_volume->ref, &ref); cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache cachefiles_withdraw_volumes list_del_init(&volume->cache_link) fscache_free_volume(fscache_volume) cache->ops->free_volume cachefiles_free_volume list_del_init(&cachefiles_volume->cache_link); kfree(fscache_volume) cachefiles_withdraw_volume fscache_withdraw_volume fscache_volume->n_accesses // fscache_volume UAF !!! The fscache_volume in cache->volumes must not have been freed yet, but its reference count may be 0. So use the new fscache_try_get_volume() helper function try to get its reference count. If the reference count of fscache_volume is 0, fscache_put_volume() is freeing it, so wait for it to be removed from cache->volumes. If its reference count is not 0, call cachefiles_withdraw_volume() with reference count protection to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value in copy_name [syzbot reported] BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160 sized_strscpy+0xc4/0x160 copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411 hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3877 [inline] slab_alloc_node mm/slub.c:3918 [inline] kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065 kmalloc include/linux/slab.h:628 [inline] hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Fix] When allocating memory to strbuf, initialize memory to 0.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check bo_va->bo is non-NULL before using it The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: cancel all works upon hci_unregister_dev() syzbot is reporting that calling hci_release_dev() from hci_error_reset() due to hci_dev_put() from hci_error_reset() can cause deadlock at destroy_workqueue(), for hci_error_reset() is called from hdev->req_workqueue which destroy_workqueue() needs to flush. We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are queued into hdev->workqueue and hdev->{power_on,error_reset} which are queued into hdev->req_workqueue are no longer running by the moment destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue); are called from hci_release_dev(). Call cancel_work_sync() on these work items from hci_unregister_dev() as soon as hdev->list is removed from hci_dev_list.

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: avoid possible crash when edev->pdev changes If a PCI device is removed during eeh_pe_report_edev(), edev->pdev will change and can cause a crash, hold the PCI rescan/remove lock while taking a copy of edev->pdev->bus.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=, skb=, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF.

In the Linux kernel, the following vulnerability has been resolved: nvme: avoid double free special payload If a discard request needs to be retried, and that retry may fail before a new special payload is added, a double free will result. Clear the RQF_SPECIAL_LOAD when the request is cleaned.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix memory leak in nfs4_set_security_label We leak nfs_fattr and nfs4_label every time we set a security xattr.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_fini ---truncated---

In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock race Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races. The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs(). The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix missing lock on sync reset reload On sync reset reload work, when remote host updates devlink on reload actions performed on that host, it misses taking devlink lock before calling devlink_remote_reload_actions_performed() which results in triggering lock assert like the following: WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50 … CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core] RIP: 0010:devl_assert_locked+0x3e/0x50 … Call Trace: ? __warn+0xa4/0x210 ? devl_assert_locked+0x3e/0x50 ? report_bug+0x160/0x280 ? handle_bug+0x3f/0x80 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? devl_assert_locked+0x3e/0x50 devlink_notify+0x88/0x2b0 ? mlx5_attach_device+0x20c/0x230 [mlx5_core] ? __pfx_devlink_notify+0x10/0x10 ? process_one_work+0x4b6/0xbb0 process_one_work+0x4b6/0xbb0 […]

In the Linux kernel, the following vulnerability has been resolved: netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id], but the function is exposed to user space before the entry is allocated via register_pernet_subsys(). Let's call register_pernet_subsys() before xt_register_template().

In the Linux kernel, the following vulnerability has been resolved: netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). We had a report that iptables-restore sometimes triggered null-ptr-deref at boot time. [0] The problem is that iptable_nat_table_init() is exposed to user space before the kernel fully initialises netns. In the small race window, a user could call iptable_nat_table_init() that accesses net_generic(net, iptable_nat_net_id), which is available only after registering iptable_nat_net_ops. Let's call register_pernet_subsys() before xt_register_template(). [0]: bpfilter: Loaded bpfilter_umh pid 11702 Started bpfilter BUG: kernel NULL pointer dereference, address: 0000000000000013 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 0 P4D 0 PREEMPT SMP NOPTI CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1 Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246 RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80 RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0 RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240 R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000 R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004 FS: 00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? xt_find_table_lock (net/netfilter/x_tables.c:1259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? page_fault_oops (arch/x86/mm/fault.c:727) ? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570) ? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat xt_find_table_lock (net/netfilter/x_tables.c:1259) xt_request_find_table_lock (net/netfilter/x_tables.c:1287) get_info (net/ipv4/netfilter/ip_tables.c:965) ? security_capable (security/security.c:809 (discriminator 13)) ? ns_capable (kernel/capability.c:376 kernel/capability.c:397) ? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656) ? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter nf_getsockopt (net/netfilter/nf_sockopt.c:116) ip_getsockopt (net/ipv4/ip_sockglue.c:1827) __sys_getsockopt (net/socket.c:2327) __x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) RIP: 0033:0x7f62844685ee Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09 RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0 R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2 R13: 00007f6284 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use after free in iucv_sock_close() iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.

In the Linux kernel, the following vulnerability has been resolved: sched: act_ct: take care of padding in struct zones_ht_key Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408

In the Linux kernel, the following vulnerability has been resolved: iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en() dom->sdev is equal to NULL, which leads to null dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: mISDN: Fix a use after free in hfcmulti_tx() Don't dereference *sp after calling dev_kfree_skb(*sp).

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: Initialize all fields in dumped nexthops struct nexthop_grp contains two reserved fields that are not initialized by nla_put_nh_group(), and carry garbage. This can be observed e.g. with strace (edited for clarity): # ip nexthop add id 1 dev lo # ip nexthop add id 101 group 1 # strace -e recvmsg ip nexthop get id 101 ... recvmsg(... [{nla_len=12, nla_type=NHA_GROUP}, [{id=1, weight=0, resvd1=0x69, resvd2=0x67}]] ...) = 52 The fields are reserved and therefore not currently used. But as they are, they leak kernel memory, and the fact they are not just zero complicates repurposing of the fields for new ends. Initialize the full structure.

In the Linux kernel, the following vulnerability has been resolved: tipc: Return non-zero value from tipc_udp_addr2str() on error tipc_udp_addr2str() should return non-zero value if the UDP media address is invalid. Otherwise, a buffer overflow access can occur in tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP media address.

In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix a use-after-free related to destroying CM IDs iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with an existing struct iw_cm_id (cm_id) as follows: conn_id->cm_id.iw = cm_id; cm_id->context = conn_id; cm_id->cm_handler = cma_iw_handler; rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make sure that cm_work_handler() does not trigger a use-after-free by only freeing of the struct rdma_id_private after all pending work has finished.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: validate nvme_local_port correctly The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Complete command early within lock A crash was observed while performing NPIV and FW reset, BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 1 PREEMPT_RT SMP NOPTI RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __die_body+0x1a/0x60 ? page_fault_oops+0x16f/0x4a0 ? do_user_addr_fault+0x174/0x7f0 ? exc_page_fault+0x69/0x1a0 ? asm_exc_page_fault+0x22/0x30 ? dma_direct_unmap_sg+0x51/0x1e0 ? preempt_count_sub+0x96/0xe0 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx] qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx] __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx] The command completion was done early while aborting the commands in driver unload path but outside lock to avoid the WARN_ON condition of performing dma_free_attr within the lock. However this caused race condition while command completion via multiple paths causing system crash. Hence complete the command early in unload path but within the lock to avoid race condition.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix for possible memory corruption Init Control Block is dereferenced incorrectly. Correctly dereference ICB

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: During vport delete send async logout explicitly During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 Send out async logout explicitly for all the ports during vport delete.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't dirty inode for readonly filesystem syzbot reports f2fs bug as below: kernel BUG at fs/f2fs/inode.c:933! RIP: 0010:f2fs_evict_inode+0x1576/0x1590 fs/f2fs/inode.c:933 Call Trace: evict+0x2a4/0x620 fs/inode.c:664 dispose_list fs/inode.c:697 [inline] evict_inodes+0x5f8/0x690 fs/inode.c:747 generic_shutdown_super+0x9d/0x2c0 fs/super.c:675 kill_block_super+0x44/0x90 fs/super.c:1667 kill_f2fs_super+0x303/0x3b0 fs/f2fs/super.c:4894 deactivate_locked_super+0xc1/0x130 fs/super.c:484 cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256 task_work_run+0x24a/0x300 kernel/task_work.c:180 ptrace_notify+0x2cd/0x380 kernel/signal.c:2399 ptrace_report_syscall include/linux/ptrace.h:411 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:473 [inline] syscall_exit_work kernel/entry/common.c:251 [inline] syscall_exit_to_user_mode_prepare kernel/entry/common.c:278 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline] syscall_exit_to_user_mode+0x15c/0x280 kernel/entry/common.c:296 do_syscall_64+0x50/0x110 arch/x86/entry/common.c:88 entry_SYSCALL_64_after_hwframe+0x63/0x6b The root cause is: - do_sys_open - f2fs_lookup - __f2fs_find_entry - f2fs_i_depth_write - f2fs_mark_inode_dirty_sync - f2fs_dirty_inode - set_inode_flag(inode, FI_DIRTY_INODE) - umount - kill_f2fs_super - kill_block_super - generic_shutdown_super - sync_filesystem : sb is readonly, skip sync_filesystem() - evict_inodes - iput - f2fs_evict_inode - f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE)) : trigger kernel panic When we try to repair i_current_depth in readonly filesystem, let's skip dirty inode to avoid panic in later f2fs_evict_inode().

In the Linux kernel, the following vulnerability has been resolved: dev/parport: fix the array out-of-bounds risk Fixed array out-of-bounds issues caused by sprintf by replacing it with snprintf for safer data copying, ensuring the destination buffer is not overflowed. Below is the stack trace I encountered during the actual issue: [ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport] [ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm: QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2 [ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp [ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024 [ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace: [ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0 [ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20 [ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c [ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc [ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38 [ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport]

In the Linux kernel, the following vulnerability has been resolved: PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal Keith reports a use-after-free when a DPC event occurs concurrently to hot-removal of the same portion of the hierarchy: The dpc_handler() awaits readiness of the secondary bus below the Downstream Port where the DPC event occurred. To do so, it polls the config space of the first child device on the secondary bus. If that child device is concurrently removed, accesses to its struct pci_dev cause the kernel to oops. That's because pci_bridge_wait_for_secondary_bus() neglects to hold a reference on the child device. Before v6.3, the function was only called on resume from system sleep or on runtime resume. Holding a reference wasn't necessary back then because the pciehp IRQ thread could never run concurrently. (On resume from system sleep, IRQs are not enabled until after the resume_noirq phase. And runtime resume is always awaited before a PCI device is removed.) However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset"), which introduced that, failed to appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a reference on the child device because dpc_handler() and pciehp may indeed run concurrently. The commit was backported to v5.10+ stable kernels, so that's the oldest one affected. Add the missing reference acquisition. Abridged stack trace: BUG: unable to handle page fault for address: 00000000091400c0 CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0 RIP: pci_bus_read_config_dword+0x17/0x50 pci_dev_wait() pci_bridge_wait_for_secondary_bus() dpc_reset_link() pcie_do_recovery() dpc_handler()

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path Dan Carpenter reported a Smack static checker warning: fs/smb/client/cifsfs.c:1981 init_cifs() error: we previously assumed 'serverclose_wq' could be null (see line 1895) The patch which introduced the serverclose workqueue used the wrong oredering in error paths in init_cifs() for freeing it on errors.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: drm/gma500: fix null pointer dereference in psb_intel_lvds_get_modes In psb_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: drm/gma500: fix null pointer dereference in cdv_intel_lvds_get_modes In cdv_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: hfs: fix to initialize fields of hfs_inode_info after hfs_alloc_inode() Syzbot reports uninitialized value access issue as below: loop0: detected capacity change from 0 to 64 ===================================================== BUG: KMSAN: uninit-value in hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30 hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30 d_revalidate fs/namei.c:862 [inline] lookup_fast+0x89e/0x8e0 fs/namei.c:1649 walk_component fs/namei.c:2001 [inline] link_path_walk+0x817/0x1480 fs/namei.c:2332 path_lookupat+0xd9/0x6f0 fs/namei.c:2485 filename_lookup+0x22e/0x740 fs/namei.c:2515 user_path_at_empty+0x8b/0x390 fs/namei.c:2924 user_path_at include/linux/namei.h:57 [inline] do_mount fs/namespace.c:3689 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x66b/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x140 fs/namespace.c:3875 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b BUG: KMSAN: uninit-value in hfs_ext_read_extent fs/hfs/extent.c:196 [inline] BUG: KMSAN: uninit-value in hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366 hfs_ext_read_extent fs/hfs/extent.c:196 [inline] hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366 block_read_full_folio+0x4ff/0x11b0 fs/buffer.c:2271 hfs_read_folio+0x55/0x60 fs/hfs/inode.c:39 filemap_read_folio+0x148/0x4f0 mm/filemap.c:2426 do_read_cache_folio+0x7c8/0xd90 mm/filemap.c:3553 do_read_cache_page mm/filemap.c:3595 [inline] read_cache_page+0xfb/0x2f0 mm/filemap.c:3604 read_mapping_page include/linux/pagemap.h:755 [inline] hfs_btree_open+0x928/0x1ae0 fs/hfs/btree.c:78 hfs_mdb_get+0x260c/0x3000 fs/hfs/mdb.c:204 hfs_fill_super+0x1fb1/0x2790 fs/hfs/super.c:406 mount_bdev+0x628/0x920 fs/super.c:1359 hfs_mount+0xcd/0xe0 fs/hfs/super.c:456 legacy_get_tree+0x167/0x2e0 fs/fs_context.c:610 vfs_get_tree+0xdc/0x5d0 fs/super.c:1489 do_new_mount+0x7a9/0x16f0 fs/namespace.c:3145 path_mount+0xf98/0x26a0 fs/namespace.c:3475 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x919/0x9e0 fs/namespace.c:3674 __ia32_sys_mount+0x15b/0x1b0 fs/namespace.c:3674 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2190 [inline] allocate_slab mm/slub.c:2354 [inline] new_slab+0x2d7/0x1400 mm/slub.c:2407 ___slab_alloc+0x16b5/0x3970 mm/slub.c:3540 __slab_alloc mm/slub.c:3625 [inline] __slab_alloc_node mm/slub.c:3678 [inline] slab_alloc_node mm/slub.c:3850 [inline] kmem_cache_alloc_lru+0x64d/0xb30 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3018 [inline] hfs_alloc_inode+0x5a/0xc0 fs/hfs/super.c:165 alloc_inode+0x83/0x440 fs/inode.c:260 new_inode_pseudo fs/inode.c:1005 [inline] new_inode+0x38/0x4f0 fs/inode.c:1031 hfs_new_inode+0x61/0x1010 fs/hfs/inode.c:186 hfs_mkdir+0x54/0x250 fs/hfs/dir.c:228 vfs_mkdir+0x49a/0x700 fs/namei.c:4126 do_mkdirat+0x529/0x810 fs/namei.c:4149 __do_sys_mkdirat fs/namei.c:4164 [inline] __se_sys_mkdirat fs/namei.c:4162 [inline] __x64_sys_mkdirat+0xc8/0x120 fs/namei.c:4162 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b It missed to initialize .tz_secondswest, .cached_start and .cached_blocks fields in struct hfs_inode_info after hfs_alloc_inode(), fix it.

In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free in vdec_close There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close.

In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix div-by-zero in vmpressure_calc_level() evict_folios() uses a second pass to reclaim folios that have gone through page writeback and become clean before it finishes the first pass, since folio_rotate_reclaimable() cannot handle those folios due to the isolation. The second pass tries to avoid potential double counting by deducting scan_control->nr_scanned. However, this can result in underflow of nr_scanned, under a condition where shrink_folio_list() does not increment nr_scanned, i.e., when folio_trylock() fails. The underflow can cause the divisor, i.e., scale=scanned+reclaimed in vmpressure_calc_level(), to become zero, resulting in the following crash: [exception RIP: vmpressure_work_fn+101] process_one_work at ffffffffa3313f2b Since scan_control->nr_scanned has no established semantics, the potential double counting has minimal risks. Therefore, fix the problem by not deducting scan_control->nr_scanned in evict_folios().

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error checks in dasd_copy_pair_store() dasd_add_busid() can return an error via ERR_PTR() if an allocation fails. However, two callsites in dasd_copy_pair_store() do not check the result, potentially resulting in a NULL pointer dereference. Fix this by checking the result with IS_ERR() and returning the error up the stack.

In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: Adjust error handling in case of absent codec device acpi_get_first_physical_node() can return NULL in several cases (no such device, ACPI table error, reference count drop to 0, etc). Existing check just emit error message, but doesn't perform return. Then this NULL pointer is passed to devm_acpi_dev_add_driver_gpios() where it is dereferenced. Adjust this error handling by adding error code return. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix NULL pointer dereference in case of DT error in ks_pcie_setup_rc_app_regs() If IORESOURCE_MEM is not provided in Device Tree due to any error, resource_list_first_type() will return NULL and pci_parse_request_of_pci_ranges() will just emit a warning. This will cause a NULL pointer dereference. Fix this bug by adding NULL return check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix infinite loop when replaying fast_commit When doing fast_commit replay an infinite loop may occur due to an uninitialized extent_status struct. ext4_ext_determine_insert_hole() does not detect the replay and calls ext4_es_find_extent_range(), which will return immediately without initializing the 'es' variable. Because 'es' contains garbage, an integer overflow may happen causing an infinite loop in this function, easily reproducible using fstest generic/039. This commit fixes this issue by unconditionally initializing the structure in function ext4_es_find_extent_range(). Thanks to Zhang Yi, for figuring out the real problem!

In the Linux kernel, the following vulnerability has been resolved: drm/qxl: Add check for drm_cvt_mode Add check for the return value of drm_cvt_mode() and return the error if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix NULL pointer dereference in adding ancillary links In v4l2_async_create_ancillary_links(), ancillary links are created for lens and flash sub-devices. These are sub-device to sub-device links and if the async notifier is related to a V4L2 device, the source sub-device of the ancillary link is NULL, leading to a NULL pointer dereference. Check the notifier's sd field is non-NULL in v4l2_async_create_ancillary_links(). [Sakari Ailus: Reword the subject and commit messages slightly.]

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT When loading a EXT program without specifying `attr->attach_prog_fd`, the `prog->aux->dst_prog` will be null. At this time, calling resolve_prog_type() anywhere will result in a null pointer dereference. Example stack trace: [ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 8.108262] Mem abort info: [ 8.108384] ESR = 0x0000000096000004 [ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits [ 8.108722] SET = 0, FnV = 0 [ 8.108827] EA = 0, S1PTW = 0 [ 8.108939] FSC = 0x04: level 0 translation fault [ 8.109102] Data abort info: [ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000 [ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000 [ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 8.112783] Modules linked in: [ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1 [ 8.113230] Hardware name: linux,dummy-virt (DT) [ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0 [ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8 [ 8.113798] sp : ffff80008283b9f0 [ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001 [ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000 [ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000 [ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff [ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4 [ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f [ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c [ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000 [ 8.114126] Call trace: [ 8.114159] may_access_direct_pkt_data+0x24/0xa0 [ 8.114202] bpf_check+0x3bc/0x28c0 [ 8.114214] bpf_prog_load+0x658/0xa58 [ 8.114227] __sys_bpf+0xc50/0x2250 [ 8.114240] __arm64_sys_bpf+0x28/0x40 [ 8.114254] invoke_syscall.constprop.0+0x54/0xf0 [ 8.114273] do_el0_svc+0x4c/0xd8 [ 8.114289] el0_svc+0x3c/0x140 [ 8.114305] el0t_64_sync_handler+0x134/0x150 [ 8.114331] el0t_64_sync+0x168/0x170 [ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403) [ 8.118672] ---[ end trace 0000000000000000 ]--- One way to fix it is by forcing `attach_prog_fd` non-empty when bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type` API broken which use verifier log to probe prog type and will log nothing if we reject invalid EXT prog before bpf_check(). Another way is by adding null check in resolve_prog_type(). The issue was introduced by commit 4a9c7bbe2ed4 ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows the logic below: prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type; It implies that when EXT program is not yet attached to `dst_prog`, the prog type should be EXT itself. This code worked fine in the past. So just keep using it. Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog` is not present in resolve_prog_type().

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter() In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Prevent UAF in proc_cpuset_show() An UAF can happen when /proc/cpuset is read as reported in [1]. This can be reproduced by the following methods: 1.add an mdelay(1000) before acquiring the cgroup_lock In the cgroup_path_ns function. 2.$cat /proc//cpuset repeatly. 3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/ $umount /sys/fs/cgroup/cpuset/ repeatly. The race that cause this bug can be shown as below: (umount) | (cat /proc//cpuset) css_release | proc_cpuset_show css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id); css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...); cgroup_destroy_root | mutex_lock(&cgroup_mutex); rebind_subsystems | cgroup_free_root | | // cgrp was freed, UAF | cgroup_path_ns_locked(cgrp,..); When the cpuset is initialized, the root node top_cpuset.css.cgrp will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated &cgroup_root.cgrp. When the umount operation is executed, top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp. The problem is that when rebinding to cgrp_dfl_root, there are cases where the cgroup_root allocated by setting up the root for cgroup v1 is cached. This could lead to a Use-After-Free (UAF) if it is subsequently freed. The descendant cgroups of cgroup v1 can only be freed after the css is released. However, the css of the root will never be released, yet the cgroup_root should be freed when it is unmounted. This means that obtaining a reference to the css of the root does not guarantee that css.cgrp->root will not be freed. Fix this problem by using rcu_read_lock in proc_cpuset_show(). As cgroup_root is kfree_rcu after commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe"), css->cgroup won't be freed during the critical section. To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to replace task_get_css with task_css. [1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd

In the Linux kernel, the following vulnerability has been resolved: block: initialize integrity buffer to zero before writing it to media Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes.

In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context.

In the Linux kernel, the following vulnerability has been resolved: dma: fix call order in dmam_free_coherent dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix array-index-out-of-bounds in diFree

In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Skip over memory region when node value is NULL In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts number of phandles. But phandles may be empty. So of_parse_phandle() in the parsing loop (0 < a < nph) may return NULL which is later dereferenced. Adjust this issue by adding NULL-return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. [Fixed title to fit within the prescribed 70-75 charcters]

In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: fix memory leak for not ip packets Free the unused skb when not ip packets arrive.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a deadlock in dma buf fence polling Introduce a version of the fence ops that on release doesn't remove the fence from the pending list, and thus doesn't require a lock to fix poll->fence wait->fence unref deadlocks. vmwgfx overwrites the wait callback to iterate over the list of all fences and update their status, to do that it holds a lock to prevent the list modifcations from other threads. The fence destroy callback both deletes the fence and removes it from the list of pending fences, for which it holds a lock. dma buf polling cb unrefs a fence after it's been signaled: so the poll calls the wait, which signals the fences, which are being destroyed. The destruction tries to acquire the lock on the pending fences list which it can never get because it's held by the wait from which it was called. Old bug, but not a lot of userspace apps were using dma-buf polling interfaces. Fix those, in particular this fixes KDE stalls/deadlock.

In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu().

In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: always initialize seqpacket_allow There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features

In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal.

In the Linux kernel, the following vulnerability has been resolved: padata: Fix possible divide-by-0 panic in padata_mt_helper() We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt".

In the Linux kernel, the following vulnerability has been resolved: serial: core: check uartclk for zero to avoid divide by zero Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Rule: add

In the Linux kernel, the following vulnerability has been resolved: drm/client: fix null pointer dereference in drm_client_modeset_probe In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Recompute DSC Params if no Stream on Link [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. (cherry picked from commit 8151a6c13111b465dbabe07c19f572f7cbd16fef)

In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests.

In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr Check return value and conduct null pointer handling to avoid null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules Check the pointer value to fix potential null pointer dereference

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the null pointer dereference to ras_manager Check ras_manager before using it

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: disallow setting special AP channel widths Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that.

In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid BUG_ON() while continue reshape after reassembling Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437

In the Linux kernel, the following vulnerability has been resolved: sctp: Fix null-ptr-deref in reuseport_add_sock(). syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace.

In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate vlan header Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline]

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UAF in ip6_xmit() If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in ip6_finish_output2() If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent UAF in ip6_send_skb() syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80

In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start ¦ ? ...... setup tc ¦ ¦ ? ? DOWN: napi_disable() napi_disable()(skip) ¦ ¦ ¦ ? ? ...... ...... ¦ ¦ ? ¦ napi_enable() ¦ ? UINIT: netif_napi_del() ¦ ? ...... ¦ ? INIT: netif_napi_add() ¦ ? ...... global reset start ¦ ¦ ? ? UP: napi_enable()(skip) ...... ¦ ¦ ? ? ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it.

In the Linux kernel, the following vulnerability has been resolved: atm: idt77252: prevent use after free in dequeue_rx() We can't dereference "skb" after calling vcc->push() because the skb is released.

In the Linux kernel, the following vulnerability has been resolved: gtp: pull network headers in gtp_dev_xmit() syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.

In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only decrement add_addr_accepted for MPJ req Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before.

In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints.

In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: initialise extack before use Fix missing initialisation of extack in flow offload.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Take state lock during tx timeout reporter mlx5e_safe_reopen_channels() requires the state lock taken. The referenced changed in the Fixes tag removed the lock to fix another issue. This patch adds it back but at a later point (when calling mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the Fixes tag.

In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane).

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0 The __vmap_pages_range_noflush() assumes its argument pages** contains pages with the same page shift. However, since commit e9c3cda4d86e ("mm, vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes __GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation failed for high order, the pages** may contain two different page shifts (high order and order-0). This could lead __vmap_pages_range_noflush() to perform incorrect mappings, potentially resulting in memory corruption. Users might encounter this as follows (vmap_allow_huge = true, 2M is for PMD_SIZE): kvmalloc(2M, __GFP_NOFAIL|GFP_X) __vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP) vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0 vmap_pages_range() vmap_pages_range_noflush() __vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens We can remove the fallback code because if a high-order allocation fails, __vmalloc_node_range_noprof() will retry with order-0. Therefore, it is unnecessary to fallback to order-0 here. Therefore, fix this by removing the fallback code.

In the Linux kernel, the following vulnerability has been resolved: fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case.

In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_test: Fix NULL dereference on allocation failure If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success.

In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: Do not mark ACPI devices as irq safe On ACPI machines, the tegra i2c module encounters an issue due to a mutex being called inside a spinlock. This leads to the following bug: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 ... Call trace: __might_sleep __mutex_lock_common mutex_lock_nested acpi_subsys_runtime_resume rpm_resume tegra_i2c_xfer The problem arises because during __pm_runtime_resume(), the spinlock &dev->power.lock is acquired before rpm_resume() is called. Later, rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on mutexes, triggering the error. To address this issue, devices on ACPI are now marked as not IRQ-safe, considering the dependency of acpi_subsys_runtime_resume() on mutexes.

In the Linux kernel, the following vulnerability has been resolved: scsi: aacraid: Fix double-free on probe failure aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: st: fix probed platform device ref count on probe error path The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Prevent USB core invalid event buffer address access This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Add poll mod list filling check In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: gtp: fix a potential NULL pointer dereference When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.)

In the Linux kernel, the following vulnerability has been resolved: ethtool: check device is present when getting link settings A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference in pcs_get_function() pinmux_generic_get_function() can return NULL and the pointer 'function' was dereferenced without checking against NULL. Add checking of pointer 'function' in pcs_get_function(). Found by code review.

In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid dereferencing rdata=NULL in smb2_new_read_req() This happens when called from SMB2_read() while using rdma and reaching the rdma_readwrite_threshold.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. (cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3)

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Mark XDomain as unplugged when router is removed I noticed that when we do discrete host router NVM upgrade and it gets hot-removed from the PCIe side as a result of NVM firmware authentication, if there is another host connected with enabled paths we hang in tearing them down. This is due to fact that the Thunderbolt networking driver also tries to cleanup the paths and ends up blocking in tb_disconnect_xdomain_paths() waiting for the domain lock. However, at this point we already cleaned the paths in tb_stop() so there is really no need for tb_disconnect_xdomain_paths() to do that anymore. Furthermore it already checks if the XDomain is unplugged and bails out early so take advantage of that and mark the XDomain as unplugged when we remove the parent router.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix ID 0 endp usage after multiple re-creations 'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip wbscl_set_scaler_filter if filter is null Callers can pass null in filter (i.e. from returned from the function wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is not the case. This fixes 4 NULL_RETURNS issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix null pointer dereference in trace ucsi_register_altmode checks IS_ERR for the alt pointer and treats NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled, ucsi_register_displayport returns NULL which causes a NULL pointer dereference in trace. Rather than return NULL, call typec_port_register_altmode to register DisplayPort alternate mode as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix dereference after null check check the pointer hive before use.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix possible NULL pointer dereference profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mc_data out-of-bounds read warning Clear warning that read mc_data[i-1] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ucode out-of-bounds read warning Clear warning that read ucode[] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds read of df_v1_7_channel_number Check the fb_channel_number range to avoid the array out-of-bounds read error

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds write warning Check the ring type value to fix the out-of-bounds write warning

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Ensure index calculation will not overflow [WHY & HOW] Make sure vmid0p72_idx, vnom0p8_idx and vmax0p9_idx calculation will never overflow and exceess array size. This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix the Out-of-bounds read warning using index i - 1U may beyond element index for mc_data[] when i = 0.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign linear_pitch_alignment even for VM [Description] Assign linear_pitch_alignment so we don't cause a divide by 0 error in VM environments

In the Linux kernel, the following vulnerability has been resolved: ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery() When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference issue. Fix it by adding the check in ublk_ctrl_start_recovery() and return immediately in case of zero 'ub->nr_queues_ready'. BUG: kernel NULL pointer dereference, address: 0000000000000028 RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180 Call Trace: ? __die+0x20/0x70 ? page_fault_oops+0x75/0x170 ? exc_page_fault+0x64/0x140 ? asm_exc_page_fault+0x22/0x30 ? ublk_ctrl_start_recovery.constprop.0+0x82/0x180 ublk_ctrl_uring_cmd+0x4f7/0x6c0 ? pick_next_task_idle+0x26/0x40 io_uring_cmd+0x9a/0x1b0 io_issue_sqe+0x193/0x3f0 io_wq_submit_work+0x9b/0x390 io_worker_handle_work+0x165/0x360 io_wq_worker+0xcb/0x2f0 ? finish_task_switch.isra.0+0x203/0x290 ? finish_task_switch.isra.0+0x203/0x290 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix kernel crash if commands allocation fails If the commands allocation fails in nvmet_tcp_alloc_cmds() the kernel crashes in nvmet_tcp_release_queue_work() because of a NULL pointer dereference. nvmet: failed to install queue 0 cntlid 1 ret 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Fix the bug by setting queue->nr_cmds to zero in case nvmet_tcp_alloc_cmd() fails.

In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix use-after-free when removing resource in vmci_resource_remove() When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove().

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind For primary VM Bus channels, primary_channel pointer is always NULL. This pointer is valid only for the secondary channels. Also, rescind callback is meant for primary channels only. Fix NULL pointer dereference by retrieving the device_obj from the parent for the primary channel.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF caused by offsets overwrite Binder objects are processed and copied individually into the target buffer during transactions. Any raw data in-between these objects is copied as well. However, this raw data copy lacks an out-of-bounds check. If the raw data exceeds the data section size then the copy overwrites the offsets section. This eventually triggers an error that attempts to unwind the processed objects. However, at this point the offsets used to index these objects are now corrupted. Unwinding with corrupted offsets can result in decrements of arbitrary nodes and lead to their premature release. Other users of such nodes are left with a dangling pointer triggering a use-after-free. This issue is made evident by the following KASAN report (trimmed): ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff47fc91598f04 by task binder-util/743 CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_free_buf+0x128/0x434 binder_thread_write+0x8a4/0x3260 binder_ioctl+0x18f0/0x258c [...] Allocated by task 743: __kmalloc_cache_noprof+0x110/0x270 binder_new_node+0x50/0x700 binder_transaction+0x413c/0x6da8 binder_thread_write+0x978/0x3260 binder_ioctl+0x18f0/0x258c [...] Freed by task 745: kfree+0xbc/0x208 binder_thread_read+0x1c5c/0x37d4 binder_ioctl+0x16d8/0x258c [...] ================================================================== To avoid this issue, let's check that the raw data copy is within the boundaries of the data section.

In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size.

In the Linux kernel, the following vulnerability has been resolved: Squashfs: sanity check symbolic link size Syzkiller reports a "KMSAN: uninit-value in pick_link" bug. This is caused by an uninitialised page, which is ultimately caused by a corrupted symbolic link size read from disk. The reason why the corrupted symlink size causes an uninitialised page is due to the following sequence of events: 1. squashfs_read_inode() is called to read the symbolic link from disk. This assigns the corrupted value 3875536935 to inode->i_size. 2. Later squashfs_symlink_read_folio() is called, which assigns this corrupted value to the length variable, which being a signed int, overflows producing a negative number. 3. The following loop that fills in the page contents checks that the copied bytes is less than length, which being negative means the loop is skipped, producing an uninitialised page. This patch adds a sanity check which checks that the symbolic link size is not larger than expected. -- V2: fix spelling mistake.

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: free driver_data after destroying hid device HID driver callbacks aren't called anymore once hid_destroy_device() has been called. Hence, hid driver_data should be freed only after the hid_destroy_device() function returned as driver_data is used in several callbacks. I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling KASAN to debug memory allocation, I got this output: [ 13.050438] ================================================================== [ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh] [ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3 [ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479 [ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0 [ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024 [ 13.067860] Call Trace: [ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 13.071486] [ 13.071492] dump_stack_lvl+0x5d/0x80 [ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002) [ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.082199] print_report+0x174/0x505 [ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.097464] kasan_report+0xc8/0x150 [ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38] [ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082] [ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5] [ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0 [ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b] [ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.150446] ? __devm_add_action+0x167/0x1d0 [ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.161814] platform_probe+0xa2/0x150 [ 13.165029] really_probe+0x1e3/0x8a0 [ 13.168243] __driver_probe_device+0x18c/0x370 [ 13.171500] driver_probe_device+0x4a/0x120 [ 13.175000] __driver_attach+0x190/0x4a0 [ 13.178521] ? __pfx___driver_attach+0x10/0x10 [ 13.181771] bus_for_each_dev+0x106/0x180 [ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10 [ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10 [ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.194382] bus_add_driver+0x29e/0x4d0 [ 13.197328] driver_register+0x1a5/0x360 [ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172] [ 13.203362] do_one_initcall+0xa7/0x380 [ 13.206432] ? __pfx_do_one_initcall+0x10/0x10 [ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5 [ 13.213211] ? kasan_unpoison+0x44/0x70 [ 13.216688] do_init_module+0x238/0x750 [ 13.2196 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it

In the Linux kernel, the following vulnerability has been resolved: PCI: Add missing bridge lock to pci_bus_lock() One of the true positives that the cfg_access_lock lockdep effort identified is this sequence: WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120 Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself. For the same motivation as adding: bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge); to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock(). [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com]

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id() mwifiex_get_priv_by_id() returns the priv pointer corresponding to the bss_num and bss_type, but without checking if the priv is actually currently in use. Unused priv pointers do not have a wiphy attached to them which can lead to NULL pointer dereferences further down the callstack. Fix this by returning only used priv pointers which have priv->bss_mode set to something else than NL80211_IFTYPE_UNSPECIFIED. Said NULL pointer dereference happened when an Accesspoint was started with wpa_supplicant -i mlan0 with this config: network={ ssid="somessid" mode=2 frequency=2412 key_mgmt=WPA-PSK WPA-PSK-SHA256 proto=RSN group=CCMP pairwise=CCMP psk="12345678" } When waiting for the AP to be established, interrupting wpa_supplicant with and starting it again this happens: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000 | [0000000000000140] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio +mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs +imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6 | CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18 | Hardware name: somemachine (DT) | Workqueue: events sdio_irq_work | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex] | lr : mwifiex_get_cfp+0x34/0x15c [mwifiex] | sp : ffff8000818b3a70 | x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004 | x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9 | x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000 | x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000 | x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517 | x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1 | x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157 | x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124 | x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000 | Call trace: | mwifiex_get_cfp+0xd8/0x15c [mwifiex] | mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex] | mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex] | mwifiex_process_sta_event+0x298/0xf0c [mwifiex] | mwifiex_process_event+0x110/0x238 [mwifiex] | mwifiex_main_process+0x428/0xa44 [mwifiex] | mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio] | process_sdio_pending_irqs+0x64/0x1b8 | sdio_irq_work+0x4c/0x7c | process_one_work+0x148/0x2a0 | worker_thread+0x2fc/0x40c | kthread+0x110/0x114 | ret_from_fork+0x10/0x20 | Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000) | ---[ end trace 0000000000000000 ]---

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adc128d818) Fix underflows seen when writing limit attributes DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.

In the Linux kernel, the following vulnerability has been resolved: pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel crash when we try to hot-unplug/disable the PCIe switch/bridge from the PHB. The crash occurs because although the MSI data structure has been released during disable/hot-unplug path and it has been assigned with NULL, still during unregistration the code was again trying to explicitly disable the MSI which causes the NULL pointer dereference and kernel crash. The patch fixes the check during unregistration path to prevent invoking pci_disable_msi/msix() since its data structure is already freed.

In the Linux kernel, the following vulnerability has been resolved: fou: Fix null-ptr-deref in GRO. We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ice: Add netif_device_attach/detach into PF reset flow Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net//device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator pbn_div before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix missing cleanup on rollforward recovery error In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts.

In the Linux kernel, the following vulnerability has been resolved: ila: call nf_unregister_net_hooks() sooner syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_ini ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open The mcp251x_hw_wake() function is called with the mpc_lock mutex held and disables the interrupt handler so that no interrupts can be processed while waking the device. If an interrupt has already occurred then waiting for the interrupt handler to complete will deadlock because it will be trying to acquire the same mutex. CPU0 CPU1 ---- ---- mcp251x_open() mutex_lock(&priv->mcp_lock) request_threaded_irq() mcp251x_can_ist() mutex_lock(&priv->mcp_lock) mcp251x_hw_wake() disable_irq() <-- deadlock Use disable_irq_nosync() instead because the interrupt handler does everything while holding the mutex so it doesn't matter if it's still running.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset the binding mark of a reused connection Steve French reported null pointer dereference error from sha256 lib. cifs.ko can send session setup requests on reused connection. If reused connection is used for binding session, conn->binding can still remain true and generate_preauth_hash() will not set sess->Preauth_HashValue and it will be NULL. It is used as a material to create an encryption key in ksmbd_gen_smb311_encryptionkey. ->Preauth_HashValue cause null pointer dereference error from crypto_shash_update(). BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 8 PID: 429254 Comm: kworker/8:39 Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET69W (1.52 ) Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] RIP: 0010:lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? do_user_addr_fault+0x2ee/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] _sha256_update+0x77/0xa0 [sha256_ssse3] sha256_avx2_update+0x15/0x30 [sha256_ssse3] crypto_shash_update+0x1e/0x40 hmac_update+0x12/0x20 crypto_shash_update+0x1e/0x40 generate_key+0x234/0x380 [ksmbd] generate_smb3encryptionkey+0x40/0x1c0 [ksmbd] ksmbd_gen_smb311_encryptionkey+0x72/0xa0 [ksmbd] ntlm_authenticate.isra.0+0x423/0x5d0 [ksmbd] smb2_sess_setup+0x952/0xaa0 [ksmbd] __process_request+0xa3/0x1d0 [ksmbd] __handle_ksmbd_work+0x1c4/0x2f0 [ksmbd] handle_ksmbd_work+0x2d/0xa0 [ksmbd] process_one_work+0x16c/0x350 worker_thread+0x306/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xef/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x44/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30

In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object When using kernel with the following extra config, - CONFIG_KASAN=y - CONFIG_KASAN_GENERIC=y - CONFIG_KASAN_INLINE=y - CONFIG_KASAN_VMALLOC=y - CONFIG_FRAME_WARN=4096 kernel detects that snd_pcm_suspend_all() access a freed 'snd_soc_pcm_runtime' object when the system is suspended, which leads to a use-after-free bug: [ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270 [ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330 [ 52.047785] Call trace: [ 52.047787] dump_backtrace+0x0/0x3c0 [ 52.047794] show_stack+0x34/0x50 [ 52.047797] dump_stack_lvl+0x68/0x8c [ 52.047802] print_address_description.constprop.0+0x74/0x2c0 [ 52.047809] kasan_report+0x210/0x230 [ 52.047815] __asan_report_load1_noabort+0x3c/0x50 [ 52.047820] snd_pcm_suspend_all+0x1a8/0x270 [ 52.047824] snd_soc_suspend+0x19c/0x4e0 The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before making any access. So we need to always set 'substream->runtime' to NULL everytime we kfree() it.

In the Linux kernel, the following vulnerability has been resolved: sch/netem: fix use after free in netem_dequeue If netem_dequeue() enqueues packet to inner qdisc and that qdisc returns __NET_XMIT_STOLEN. The packet is dropped but qdisc_tree_reduce_backlog() is not called to update the parent's q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue fails") Commands to trigger KASAN UaF: ip link add type dummy ip link set lo up ip link set dummy0 up tc qdisc add dev lo parent root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2: handle 3: drr tc filter add dev lo parent 3: basic classid 3:1 action mirred egress redirect dev dummy0 tc class add dev lo classid 3:1 drr ping -c1 -W0.01 localhost # Trigger bug tc class del dev lo classid 1:1 tc class add dev lo classid 1:1 drr ping -c1 -W0.01 localhost # UaF

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix bridge mode operations when there are no VFs Currently, trying to set the bridge mode attribute when numvfs=0 leads to a crash: bridge link set dev eth2 hwmode vepa [ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] [ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core] [...] [ 168.976037] Call Trace: [ 168.976188] [ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core] [ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core] [ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0 [ 168.979714] rtnetlink_rcv_msg+0x159/0x400 [ 168.980451] netlink_rcv_skb+0x54/0x100 [ 168.980675] netlink_unicast+0x241/0x360 [ 168.980918] netlink_sendmsg+0x1f6/0x430 [ 168.981162] ____sys_sendmsg+0x3bb/0x3f0 [ 168.982155] ___sys_sendmsg+0x88/0xd0 [ 168.985036] __sys_sendmsg+0x59/0xa0 [ 168.985477] do_syscall_64+0x79/0x150 [ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 168.987773] RIP: 0033:0x7f8f7950f917 (esw->fdb_table.legacy.vepa_fdb is null) The bridge mode is only relevant when there are multiple functions per port. Therefore, prevent setting and getting this setting when there are no VFs. Note that after this change, there are no settings to change on the PF interface using `bridge link` when there are no VFs, so the interface no longer appears in the `bridge link` output.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf.

CONFIG_CONSOLE_LOGLEVEL_QUIET=3

Не работает с модемом Quectel Wireless Solutions Co., Ltd. EM120R-GL LTE Modem