Уязвимость функций Signalfd_poll() и binder_poll() ядра операционных систем Linux, позволяющая нарушителю выполнить произвольный код

Уязвимость функции read_bbreg_hdl() в модуле drivers/staging/rtl8712/rtl8712_cmd.c Wi-Fi драйвера rtl8712 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции unflatten_dt_nodes() драйвера Device Tree ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции nvme_tcp_io_work() драйвера NVMe ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции mmput() в компоненте IB/core ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции brcmstb_pm_probe() в компоненте brcmstb ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ft_chain_release_hook() в компоненте netfilter ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента i40e ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента ipv6 ядра операционной системы Linux, позволяющая нарушителю получить доступ к конфиденциальной информации

Уязвимость компонентов drm/radeon ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента mpt3sas ядра операционной системы Linux, позволяющая нарушителю повысить привилегии в системе

Уязвимость компонента emu10k1 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента usb-audio ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции __nvmet_req_complete() модуля drivers/nvme/target/core.c драйвера поддержки NVME ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции binder_inc_ref_for_node() модуля drivers/android/binder.c драйвера связи с Android ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции __ieee80211_scan_completed() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции optc1_enable_optc_clock() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции convert___skb_to_skb() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции ieee80211_ibss_finish_csa() в модуле net/mac80211/ibss.c реализации стека mac80211 ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции attach_default_qdiscs() в модуле net/sched/sch_generic.c подсистемы управления трафиком net/sched ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции udmabuf_dev_init() в модуле drivers/dma-buf/udmabuf.c ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функций con_font_set() и con_font_default() в модуле drivers/tty/vt/vt.c драйвера виртуального терминала консоли ядра операционной системы Linux, позволяющая нарушителю получить доступ к защищаемой информации или вызвать отказ в обслуживании

Уязвимость функции usb_reset_device() в модуле drivers/usb/core/hub.c драйвера устройств шины USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции mceusb_gen1_init() в модуле drivers/media/rc/mceusb.c драйвера мультимедийных устройств ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ftrace_startup() в модуле kernel/trace/ftrace.c поддержки трассировки ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость макроопределения rcu_assign_sk_user_data_nocopy() в модуле include/net/sock.h поддержки сетевых функций ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции hidraw_release() в модуле drivers/hid/hidraw.c драйвера подсистемы устройств пользовательского интерфейса ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции pvr2_hdw_create() в модуле drivers/media/usb/pvrusb2/pvrusb2-hdw.c драйвера мультимедийных устройств USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции fastrpc_cb_probe() в модуле drivers/misc/fastrpc.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции gpio_fan_set_cur_state() в модуле drivers/hwmon/gpio-fan.c драйвера мониторинга оборудования ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции raspberrypi_discover_clocks() в модуле drivers/clk/bcm/clk-raspberrypi.c драйвера контроллера тактовой частоты Samsung Exynos ядра операционной системы Linux, позволяющая нарушителю получить несанкционированный доступ к защищаемой информации

Уязвимость функции fastrpc_cb_probe() в модуле drivers/misc/fastrpc.c ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функций iforce_serio_xmit() и iforce_serio_irq() в модуле drivers/input/joystick/iforce/iforce-serio.c драйвера устройств ввода ядра операционной системы Linux, позволяющая нарушителю, действующему удалённо, оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции cmd_hdl_filter() в модуле drivers/staging/rtl8712/rtl8712_cmd.c поддержки дополнительных устройств ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции kcm_attach() в модуле net/kcm/kcmsock.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю, действующему удалённо, оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции adf7242_remove() в модуле drivers/net/ieee802154/adf7242.c драйвера сетевых устройств ядра операционной системы Linux, позволяющая нарушителю, действующему удалённо, оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функций steam_recv_report() и steam_send_report() модуля drivers/hid/hid-steam.c драйвера подсистемы устройств пользовательского интерфейса ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции sienna_cichlid_set_ppt_funcs() модуля drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c драйвера инфраструктуры прямого рендеринга (DRI) видеокарт AMD ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции pm2fb_check_var() модуля drivers/video/fbdev/pm2fb.c драйвера устройств кадрового буфера ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции __disable_kprobe() модуля kernel/kprobes.c ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

There exists a use-after-free in io_uring in the Linux kernel. Signalfd_poll() and binder_poll() use a waitqueue whose lifetime is the current task. It will send a POLLFREE notification to all waiters before the queue is freed. Unfortunately, the io_uring poll doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with io_uring poll, and the waitqueue gets freed. We recommend upgrading past commit fc78b2fc21f10c4c9c4d5d659a685710ffa63659

A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges.

In the Linux kernel, the following vulnerability has been resolved: of: fdt: fix off-by-one error in unflatten_dt_nodes() Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: IB/core: Fix a nested dead lock as part of ODP flow Fix a nested dead lock as part of ODP flow by using mmput_async(). From the below call trace [1] can see that calling mmput() once we have the umem_odp->umem_mutex locked as required by ib_umem_odp_map_dma_and_lock() might trigger in the same task the exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which may dead lock when trying to lock the same mutex. Moving to use mmput_async() will solve the problem as the above exit_mmap() flow will be called in other task and will be executed once the lock will be available. [1] [64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid: 2 flags:0x00004000 [64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] [64843.077719] Call Trace: [64843.077722] [64843.077724] __schedule+0x23d/0x590 [64843.077729] schedule+0x4e/0xb0 [64843.077735] schedule_preempt_disabled+0xe/0x10 [64843.077740] __mutex_lock.constprop.0+0x263/0x490 [64843.077747] __mutex_lock_slowpath+0x13/0x20 [64843.077752] mutex_lock+0x34/0x40 [64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib] [64843.077808] __mmu_notifier_release+0x1a4/0x200 [64843.077816] exit_mmap+0x1bc/0x200 [64843.077822] ? walk_page_range+0x9c/0x120 [64843.077828] ? __cond_resched+0x1a/0x50 [64843.077833] ? mutex_lock+0x13/0x40 [64843.077839] ? uprobe_clear_state+0xac/0x120 [64843.077860] mmput+0x5f/0x140 [64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core] [64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib] [64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib] [64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560 [mlx5_ib] [64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib] [64843.078051] process_one_work+0x22b/0x3d0 [64843.078059] worker_thread+0x53/0x410 [64843.078065] ? process_one_work+0x3d0/0x3d0 [64843.078073] kthread+0x12a/0x150 [64843.078079] ? set_kthread_struct+0x50/0x50 [64843.078085] ret_from_fork+0x22/0x30 [64843.078093]

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix UAF when detecting digest errors We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted.

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix out-of-bounds read when setting HMAC data. The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=, info=) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=, info=) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 , family=, family=) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 ) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 ) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=, msg=0xffffc90000ba7e48, len=) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix kernel crash during module removal The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clean up hook list when offload flags check fails splice back the hook list so nft_chain_release_hook() has a chance to release the hooks. BUG: memory leak unreferenced object 0xffff88810180b100 (size 96): comm "syz-executor133", pid 3619, jiffies 4294945714 (age 12.690s) hex dump (first 32 bytes): 28 64 23 02 81 88 ff ff 28 64 23 02 81 88 ff ff (d#.....(d#..... 90 a8 aa 83 ff ff ff ff 00 00 b5 0f 81 88 ff ff ................ backtrace: [] kmalloc include/linux/slab.h:600 [inline] [] nft_netdev_hook_alloc+0x3b/0xc0 net/netfilter/nf_tables_api.c:1901 [] nft_chain_parse_netdev net/netfilter/nf_tables_api.c:1998 [inline] [] nft_chain_parse_hook+0x33a/0x530 net/netfilter/nf_tables_api.c:2073 [] nf_tables_addchain.constprop.0+0x10b/0x950 net/netfilter/nf_tables_api.c:2218 [] nf_tables_newchain+0xa8b/0xc60 net/netfilter/nf_tables_api.c:2593 [] nfnetlink_rcv_batch+0xa46/0xd20 net/netfilter/nfnetlink.c:517 [] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:638 [inline] [] nfnetlink_rcv+0x1f9/0x220 net/netfilter/nfnetlink.c:656 [] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [] sock_sendmsg_nosec net/socket.c:714 [inline] [] sock_sendmsg+0x56/0x80 net/socket.c:734 [] ____sys_sendmsg+0x36c/0x390 net/socket.c:2482 [] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [] __sys_sendmsg+0x88/0x100 net/socket.c:2565 [] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs In brcmstb_pm_probe(), there are two kinds of leak bugs: (1) we need to add of_node_put() when for_each__matching_node() breaks (2) we need to add iounmap() for each iomap in fail path

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use-after-free warning Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a use-after-free Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface() There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces.

In the Linux kernel, the following vulnerability has been resolved: ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc() The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by calling aplay multiple times with 16 channels: aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40 index 65 is out of range for type 'snd_emu10k1_voice [64]' CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7 Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 Call Trace: dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x3f __ubsan_handle_out_of_bounds.cold+0x44/0x49 snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1] snd_pcm_hw_params+0x29f/0x600 [snd_pcm] snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm] ? exit_to_user_mode_prepare+0x35/0x170 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x26/0x50 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_prepare+0x35/0x170 snd_pcm_ioctl+0x27/0x40 [snd_pcm] __x64_sys_ioctl+0x95/0xd0 do_syscall_64+0x5c/0x90 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [] ra = [] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [] si_dma_is_lockup+0x34/0xd0 [] radeon_fence_check_lockup+0xd0/0x290 [] process_one_work+0x280/0x550 [] worker_thread+0x70/0x7c0 [] worker_thread+0x130/0x7c0 [] kthread+0x200/0x210 [] worker_thread+0x0/0x7c0 [] kthread+0x14c/0x210 [] ret_from_kernel_thread+0x18/0x20 [] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix UAF in ieee80211_scan_rx() ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done().

In the Linux kernel, the following vulnerability has been resolved: USB: core: Prevent nested device-reset calls Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future.

In the Linux kernel, the following vulnerability has been resolved: media: mceusb: Use new usb_control_msg_*() routines Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF of ref->proc caused by race condition A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the reference for a node. In this case, the target proc normally releases the failed reference upon close as expected. However, if the target is dying in parallel the call will race with binder_deferred_release(), so the target could have released all of its references by now leaving the cleanup of the new failed reference unhandled. The transaction then ends and the target proc gets released making the ref->proc now a dangling pointer. Later on, ref->node is closed and we attempt to take spin_lock(&ref->proc->inner_lock), which leads to the use-after-free bug reported below. Let's fix this by cleaning up the failed reference on the spot instead of relying on the target to do so. ================================================================== BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150 Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590 CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: dump_backtrace.part.0+0x1d0/0x1e0 show_stack+0x18/0x70 dump_stack_lvl+0x68/0x84 print_report+0x2e4/0x61c kasan_report+0xa4/0x110 kasan_check_range+0xfc/0x1a4 __kasan_check_write+0x3c/0x50 _raw_spin_lock+0xa8/0x150 binder_deferred_func+0x5e0/0x9b0 process_one_work+0x38c/0x5f0 worker_thread+0x9c/0x694 kthread+0x188/0x190 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected When we are not connected to a channel, sending channel "switch" announcement doesn't make any sense. The BSS list is empty in that case. This causes the for loop in cfg80211_get_bss() to be bypassed, so the function returns NULL (check line 1424 of net/wireless/scan.c), causing the WARN_ON() in ieee80211_ibss_csa_beacon() to get triggered (check line 500 of net/mac80211/ibss.c), which was consequently reported on the syzkaller dashboard. Thus, check if we have an existing connection before generating the CSA beacon in ieee80211_ibss_finish_csa().

In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix array out of bounds access The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end t ---truncated---

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Prevent out-of-bounds access The while loop in raspberrypi_discover_clocks() relies on the assumption that the id of the last clock element is zero. Because this data comes from the Videocore firmware and it doesn't guarantuee such a behavior this could lead to out-of-bounds access. So fix this by providing a sentinel element.

In the Linux kernel, the following vulnerability has been resolved: vt: Clear selection before changing the font When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix memory corruption on open The probe session-duplication overflow check incremented the session count also when there were no more available sessions so that memory beyond the fixed-size slab-allocated session array could be corrupted in fastrpc_session_alloc() on open().

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix memory corruption on probe Add the missing sanity check on the probed-session count to avoid corrupting memory beyond the fixed-size slab-allocated session array when there are more than FASTRPC_MAX_SESSIONS sessions defined in the devicetree.

In the Linux kernel, the following vulnerability has been resolved: Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag syzbot is reporting hung task at __input_unregister_device() [1], for iforce_close() waiting at wait_event_interruptible() with dev->mutex held is blocking input_disconnect_device() from __input_unregister_device(). It seems that the cause is simply that commit c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device") forgot to call wake_up() after clear_bit(). Fix this problem by introducing a helper that calls clear_bit() followed by wake_up_all().

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix use after free bugs _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them.

In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away.

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix netdevice reference leaks in attach_default_qdiscs() In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails to attach qdisc because there is no memory in attach_one_default_qdisc(). Then dev->qdisc will be noop_qdisc by default. But the other queues may be able to successfully attach to default qdisc. In this case, the fallback to noqueue process will be triggered. If the original attached qdisc is not released and a new one is directly attached, this will cause netdevice reference leaks. The following is the bug log: veth0: default qdisc (fq_codel) fail, fallback to noqueue unregister_netdevice: waiting for veth0 to become free. Usage count = 32 leaked reference. qdisc_alloc+0x12e/0x210 qdisc_create_dflt+0x62/0x140 attach_one_default_qdisc.constprop.41+0x44/0x70 dev_activate+0x128/0x290 __dev_open+0x12a/0x190 __dev_change_flags+0x1a2/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x332/0x1150 __rtnl_newlink+0x52f/0x8e0 rtnl_newlink+0x43/0x70 rtnetlink_rcv_msg+0x140/0x3b0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1bb/0x290 netlink_sendmsg+0x37c/0x4e0 sock_sendmsg+0x5f/0x70 ____sys_sendmsg+0x208/0x280 Fix this bug by clearing any non-noop qdiscs that may have been assigned before trying to re-attach.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: add missing ->fini_microcode interface for Sienna Cichlid To avoid any potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: ieee802154/adf7242: defer destroy_workqueue call There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. runs")

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: clear optc underflow before turn off odm clock [Why] After ODM clock off, optc underflow bit will be kept there always and clear not work. We need to clear that before clock off. [How] Clear that if have when clock off.

In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix kernel BUG in purge_effective_progs Syzkaller reported a triggered kernel BUG as follows: ------------[ cut here ]------------ kernel BUG at kernel/bpf/cgroup.c:925! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 194 Comm: detach Not tainted 5.19.0-14184-g69dac8e431af #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__cgroup_bpf_detach+0x1f2/0x2a0 Code: 00 e8 92 60 30 00 84 c0 75 d8 4c 89 e0 31 f6 85 f6 74 19 42 f6 84 28 48 05 00 00 02 75 0e 48 8b 80 c0 00 00 00 48 85 c0 75 e5 <0f> 0b 48 8b 0c5 RSP: 0018:ffffc9000055bdb0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888100ec0800 RCX: ffffc900000f1000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff888100ec4578 RBP: 0000000000000000 R08: ffff888100ec0800 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100ec4000 R13: 000000000000000d R14: ffffc90000199000 R15: ffff888100effb00 FS: 00007f68213d2b80(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f74a0e5850 CR3: 0000000102836000 CR4: 00000000000006e0 Call Trace: cgroup_bpf_prog_detach+0xcc/0x100 __sys_bpf+0x2273/0x2a00 __x64_sys_bpf+0x17/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f68214dbcb9 Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff8 RSP: 002b:00007ffeb487db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f68214dbcb9 RDX: 0000000000000090 RSI: 00007ffeb487db70 RDI: 0000000000000009 RBP: 0000000000000003 R08: 0000000000000012 R09: 0000000b00000003 R10: 00007ffeb487db70 R11: 0000000000000246 R12: 00007ffeb487dc20 R13: 0000000000000004 R14: 0000000000000001 R15: 000055f74a1011b0 Modules linked in: ---[ end trace 0000000000000000 ]--- Repetition steps: For the following cgroup tree, root | cg1 | cg2 1. attach prog2 to cg2, and then attach prog1 to cg1, both bpf progs attach type is NONE or OVERRIDE. 2. write 1 to /proc/thread-self/fail-nth for failslab. 3. detach prog1 for cg1, and then kernel BUG occur. Failslab injection will cause kmalloc fail and fall back to purge_effective_progs. The problem is that cg2 have attached another prog, so when go through cg2 layer, iteration will add pos to 1, and subsequent operations will be skipped by the following condition, and cg will meet NULL in the end. `if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))` The NULL cg means no link or prog match, this is as expected, and it's not a bug. So here just skip the no match situation.

In the Linux kernel, the following vulnerability has been resolved: bpf: Don't redirect packets with invalid pkt_len Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any skbs, that is, the flow->head is null. The root cause, as the [2] says, is because that bpf_prog_test_run_skb() run a bpf prog which redirects empty skbs. So we should determine whether the length of the packet modified by bpf prog or others like bpf_prog_test is valid before forwarding it directly.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list.

In the Linux kernel, the following vulnerability has been resolved: fbdev: fb_pm2fb: Avoid potential divide by zero error In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be copied from user, then go through `fb_set_var()` and `info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`. Along the path, `var->pixclock` won't be modified. This function checks whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is zero, there will be a divide by zero error. So, it is necessary to check whether denominator is zero to avoid crash. As this bug is found by Syzkaller, logs are listed below. divide error in pm2fb_check_var Call Trace: fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189

In the Linux kernel, the following vulnerability has been resolved: net: fix refcount bug in sk_psock_get (2) Syzkaller reports refcount bug as follows: ------------[ cut here ]------------ refcount_t: saturated; leaking memory. WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19 Modules linked in: CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda7d90 #0 __refcount_add_not_zero include/linux/refcount.h:163 [inline] __refcount_inc_not_zero include/linux/refcount.h:227 [inline] refcount_inc_not_zero include/linux/refcount.h:245 [inline] sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439 tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091 tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983 tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057 tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659 tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682 sk_backlog_rcv include/net/sock.h:1061 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2849 release_sock+0x54/0x1b0 net/core/sock.c:3404 inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909 __sys_shutdown_sock net/socket.c:2331 [inline] __sys_shutdown_sock net/socket.c:2325 [inline] __sys_shutdown+0xf1/0x1b0 net/socket.c:2343 __do_sys_shutdown net/socket.c:2351 [inline] __se_sys_shutdown net/socket.c:2349 [inline] __x64_sys_shutdown+0x50/0x70 net/socket.c:2349 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 During SMC fallback process in connect syscall, kernel will replaces TCP with SMC. In order to forward wakeup smc socket waitqueue after fallback, kernel will sets clcsk->sk_user_data to origin smc socket in smc_fback_replace_callbacks(). Later, in shutdown syscall, kernel will calls sk_psock_get(), which treats the clcsk->sk_user_data as psock type, triggering the refcnt warning. So, the root cause is that smc and psock, both will use sk_user_data field. So they will mismatch this field easily. This patch solves it by using another bit(defined as SK_USER_DATA_PSOCK) in PTRMASK, to mark whether sk_user_data points to a psock object or not. This patch depends on a PTRMASK introduced in commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged"). For there will possibly be more flags in the sk_user_data field, this patch also refactor sk_user_data flags code to be more generic to improve its maintainability.

In the Linux kernel, the following vulnerability has been resolved: HID: hidraw: fix memory leak in hidraw_release() Free the buffered reports before deleting the list entry. BUG: memory leak unreferenced object 0xffff88810e72f180 (size 32): comm "softirq", pid 0, jiffies 4294945143 (age 16.080s) hex dump (first 32 bytes): 64 f3 c6 6a d1 88 07 04 00 00 00 00 00 00 00 00 d..j............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemdup+0x23/0x50 mm/util.c:128 [] kmemdup include/linux/fortify-string.h:440 [inline] [] hidraw_report_event+0xa2/0x150 drivers/hid/hidraw.c:521 [] hid_report_raw_event+0x27d/0x740 drivers/hid/hid-core.c:1992 [] hid_input_report+0x1ae/0x270 drivers/hid/hid-core.c:2065 [] hid_irq_in+0x1ff/0x250 drivers/hid/usbhid/hid-core.c:284 [] __usb_hcd_giveback_urb+0xf9/0x230 drivers/usb/core/hcd.c:1670 [] usb_hcd_giveback_urb+0x1b6/0x1d0 drivers/usb/core/hcd.c:1747 [] dummy_timer+0x8e4/0x14c0 drivers/usb/gadget/udc/dummy_hcd.c:1988 [] call_timer_fn+0x38/0x200 kernel/time/timer.c:1474 [] expire_timers kernel/time/timer.c:1519 [inline] [] __run_timers.part.0+0x316/0x430 kernel/time/timer.c:1790 [] __run_timers kernel/time/timer.c:1768 [inline] [] run_timer_softirq+0x44/0x90 kernel/time/timer.c:1803 [] __do_softirq+0xe6/0x2ea kernel/softirq.c:571 [] invoke_softirq kernel/softirq.c:445 [inline] [] __irq_exit_rcu kernel/softirq.c:650 [inline] [] irq_exit_rcu+0xc0/0x110 kernel/softirq.c:662 [] sysvec_apic_timer_interrupt+0xa2/0xd0 arch/x86/kernel/apic/apic.c:1106 [] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:649 [] native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline] [] arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline] [] acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline] [] acpi_idle_do_entry+0xc0/0xd0 drivers/acpi/processor_idle.c:554

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix memory leak in pvr_probe The error handling code in pvr2_hdw_create forgets to unregister the v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create, it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL, which leads to that pvr2_hdw_destroy directly returns. Fix this by adding v4l2_device_unregister to decrease the refcount of usb interface.

In the Linux kernel, the following vulnerability has been resolved: udmabuf: Set the DMA mask for the udmabuf device (v2) If the DMA mask is not set explicitly, the following warning occurs when the userspace tries to access the dma-buf via the CPU as reported by syzbot here: WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188 __dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Modules linked in: CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0 83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45 31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00 RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408 RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002 R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000 FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f62fcf530f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9 RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 v2: Dont't forget to deregister if DMA mask setup fails.

In the Linux kernel, the following vulnerability has been resolved: HID: steam: Prevent NULL pointer dereference in steam_{recv,send}_report It is possible for a malicious device to forgo submitting a Feature Report. The HID Steam driver presently makes no prevision for this and de-references the 'struct hid_report' pointer obtained from the HID devices without first checking its validity. Let's change that.

In the Linux kernel, the following vulnerability has been resolved: kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated---