Уязвимость параметра datalen драйвера refclock протокола сетевого времени NTP, позволяющая нарушителю выполнить произвольный код или вызвать отказ в обслуживании

Уязвимость службы ограничения скорости протокола сетевого времени NTP, позволяющая нарушителю вызвать частичное нарушение конфиденциальности, целостности и доступности защищаемой информации

Уязвимость функции CRYPTO_ASSOC демон-программы ntpd протокола сетевого времени NTP, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость реализации протокола синхронизации времени NTP, связанная с недостаточной проверкой вводимых данных, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции decodearr программы мониторинга ntpq реализации протокола синхронизации времени NTP, позволяющая нарушителю выполнить произвольный код

Уязвимость демона ntpd реализации протокола синхронизации времени NTP, связанная с ошибками управления ключами, позволяющая нарушителю оказать воздействие на целостность данных

Уязвимость программы-демона ntpd реализации протокола синхронизации времени NTP, связанная с ошибками обработки входных данных, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость метода ctl_getitem программы-демона ntpd реализации протокола синхронизации времени NTP, связанная с чтением за допустимыми границами буфера данных, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость сетевого протокола NTP, связанная с ошибкой при обработке данных, позволяющая нарушителю оказать воздействие на целостность данных

Уязвимость опции unpeer реализации протокола синхронизации времени NTP, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость реализации протокола синхронизации времени NTP, существующая из-за недостаточной проверки входных данных, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость драйвера Datum Programmable Time Server (DPTS) refclock реализации протокола синхронизации времени NTP, позволяющая нарушителю вызвать отказ в работе демона ntpd с помощью созданного устройства /dev/datum

ntp_crypto.c in ntpd in NTP 4.x before 4.2.8p1, when Autokey Authentication is enabled, allows remote attackers to obtain sensitive information from process memory or cause a denial of service (daemon crash) via a packet containing an extension field with an invalid value for the length of its value field.

ntpd in ntp before 4.2.8p3 with remote configuration enabled allows remote authenticated users with knowledge of the configuration password and access to a computer entrusted to perform remote configuration to cause a denial of service (service crash) via a NULL byte in a crafted configuration directive packet.

The panic_gate check in NTP before 4.2.8p5 is only re-enabled after the first change to the system clock that was greater than 128 milliseconds by default, which allows remote attackers to set NTP to an arbitrary time when started with the -g option, or to alter the time by up to 900 seconds otherwise by responding to an unspecified number of requests from trusted sources, and leveraging a resulting denial of service (abort and restart).

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted packets containing particular autokey operations. NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

Memory leak in the CRYPTO_ASSOC function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (memory consumption).

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

The "pidfile" or "driftfile" directives in NTP ntpd 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77, when ntpd is configured to allow remote configuration, allows remote attackers with an IP address that is allowed to send configuration requests, and with knowledge of the remote configuration password to write to arbitrary files via the :config command.

The ntpd client in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service via a number of crafted "KOD" messages.

The rate limiting feature in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to have unspecified impact via a large number of crafted requests.

Use-after-free vulnerability in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to possibly execute arbitrary code or cause a denial of service (crash) via crafted packets.

ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (infinite loop or crash) by pointing the key file at the log file.

ntpq in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted mode 6 response packets.

The datalen parameter in the refclock driver in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to execute arbitrary code or cause a denial of service (crash) via a negative input value.

Buffer overflow in the password management functionality in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (daemon crash) or possibly execute arbitrary code via a crafted key file.

The decodenetnum function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (assertion failure) via a 6 or mode 7 packet containing a long data value.

NTP before 4.2.8p6 and 4.3.x before 4.3.90, when configured in broadcast mode, allows man-in-the-middle attackers to conduct replay attacks by sniffing the network.

NTP 4.x before 4.2.8p6 and 4.3.x before 4.3.90 do not verify peer associations of symmetric keys when authenticating packets, which might allow remote attackers to conduct impersonation attacks via an arbitrary trusted key, aka a "skeleton key."

The nextvar function in NTP before 4.2.8p6 and 4.3.x before 4.3.90 does not properly validate the length of its input, which allows an attacker to cause a denial of service (application crash).

The ntpq saveconfig command in NTP 4.1.2, 4.2.x before 4.2.8p6, 4.3, 4.3.25, 4.3.70, and 4.3.77 does not properly filter special characters, which allows attackers to cause unspecified impact via a crafted filename.

ntpd in NTP before 4.2.8p6 and 4.3.x before 4.3.90 allows remote attackers to cause a denial of service (NULL pointer dereference) via a ntpdc reslist command.

NTP before 4.2.8p6 and 4.3.0 before 4.3.90 allows a remote attackers to cause a denial of service (stack exhaustion) via an ntpdc relist command, which triggers recursive traversal of the restriction list.

NTP before 4.2.8p6 and 4.3.x before 4.3.90 allows remote attackers to cause a denial of service (client-server association tear down) by sending broadcast packets with invalid authentication to a broadcast client.

NTP before 4.2.8p6 and 4.3.x before 4.3.90 allows remote attackers to bypass the origin timestamp validation via a packet with an origin timestamp set to zero.

ntpq in NTP before 4.2.8p7 allows remote attackers to obtain origin timestamps and then impersonate peers via unspecified vectors.

The ntpq protocol in NTP before 4.2.8p7 allows remote attackers to conduct replay attacks by sniffing the network.

The getresponse function in ntpq in NTP versions before 4.2.8p9 and 4.3.x before 4.3.90 allows remote attackers to cause a denial of service (infinite loop) via crafted packets with incorrect values.

An off-path attacker can cause a preemptible client association to be demobilized in NTP 4.2.8p4 and earlier and NTPSec a5fb34b9cc89b92a8fef2f459004865c93bb7f92 by sending a crypto NAK packet to a victim client with a spoofed source address of an existing associated peer. This is true even if authentication is enabled.

A malicious authenticated peer can create arbitrarily-many ephemeral associations in order to win the clock selection algorithm in ntpd in NTP 4.2.8p4 and earlier and NTPsec 3e160db8dc248a0bcb053b56a80167dc742d2b74 and a5fb34b9cc89b92a8fef2f459004865c93bb7f92 and modify a victim's clock.

NTP before 4.2.8p7 and 4.3.x before 4.3.92, when mode7 is enabled, allows remote attackers to cause a denial of service (ntpd abort) by using the same IP address multiple times in an unconfig directive.

NTP before 4.2.8p7 and 4.3.x before 4.3.92 allows remote attackers to cause a denial of service (prevent subsequent authentication) by leveraging knowledge of the controlkey or requestkey and sending a crafted packet to ntpd, which changes the value of trustedkey, controlkey, or requestkey. NOTE: this vulnerability exists because of a CVE-2016-2516 regression.

The MATCH_ASSOC function in NTP before version 4.2.8p9 and 4.3.x before 4.3.92 allows remote attackers to cause an out-of-bounds reference via an addpeer request with a large hmode value.

ntpd in NTP before 4.2.8p7 and 4.3.x before 4.3.92 allows remote attackers to cause a denial of service (ntpd abort) by a large request data value, which triggers the ctl_getitem function to return a NULL value.

ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (ephemeral-association demobilization) by sending a spoofed crypto-NAK packet with incorrect authentication data at a certain time.

The process_packet function in ntp_proto.c in ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (peer-variable modification) by sending spoofed packets from many source IP addresses in a certain scenario, as demonstrated by triggering an incorrect leap indication.

ntpd in NTP 4.x before 4.2.8p8, when autokey is enabled, allows remote attackers to cause a denial of service (peer-variable clearing and association outage) by sending (1) a spoofed crypto-NAK packet or (2) a packet with an incorrect MAC value at a certain time.

ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (interleaved-mode transition and time change) via a spoofed broadcast packet. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-1548.

NTP before 4.2.8p9 rate limits responses received from the configured sources when rate limiting for all associations is enabled, which allows remote attackers to cause a denial of service (prevent responses from the sources) by sending responses with a spoofed source address.

NTP before 4.2.8p9 changes the peer structure to the interface it receives the response from a source, which allows remote attackers to cause a denial of service (prevent communication with a source) by sending a response for a source to an interface the source does not use.

NTP before 4.2.8p9 does not properly perform the initial sync calculations, which allows remote attackers to unspecified impact via unknown vectors, related to a "root distance that did not include the peer dispersion."

The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a crafted mrulist query.

The control mode (mode 6) functionality in ntpd in NTP before 4.2.8p9 allows remote attackers to set or unset traps via a crafted control mode packet.

ntpd in NTP before 4.2.8p9, when the trap service is enabled, allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a crafted packet.

The mx4200_send function in the legacy MX4200 refclock in NTP before 4.2.8p10 and 4.3.x before 4.3.94 does not properly handle the return value of the snprintf function, which allows local users to execute arbitrary code via unspecified vectors, which trigger an out-of-bounds memory write.

Stack-based buffer overflow in the Windows installer for NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via an application path on the command line.

NTP before 4.2.8p10 and 4.3.x before 4.3.94, when using PPSAPI, allows local users to gain privileges via a DLL in the PPSAPI_DLLS environment variable.

Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable.

The Windows installer for NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via vectors related to an argument with multiple null bytes.

Stack-based buffer overflow in the reslist function in ntpq in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote servers have unspecified impact via a long flagstr variable in a restriction list response.

Buffer overflow in the legacy Datum Programmable Time Server (DPTS) refclock driver in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via a crafted /dev/datum device.

NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote authenticated users to cause a denial of service (daemon crash) via an invalid setting in a :config directive, related to the unpeer option.

NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive.

ntpd in ntp 4.2.x before 4.2.8p7 and 4.3.x before 4.3.92 allows authenticated users that know the private symmetric key to create arbitrarily-many ephemeral associations in order to win the clock selection of ntpd and modify a victim's clock via a Sybil attack. This issue exists because of an incomplete fix for CVE-2016-1549.

The ctl_getitem method in ntpd in ntp-4.2.8p6 before 4.2.8p11 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted mode 6 packet with a ntpd instance from 4.2.8p6 through 4.2.8p10.

Buffer overflow in the decodearr function in ntpq in ntp 4.2.8p6 through 4.2.8p10 allows remote attackers to execute arbitrary code by leveraging an ntpq query and sending a response with a crafted array.

ntpd in ntp 4.2.8p4 before 4.2.8p11 drops bad packets before updating the "received" timestamp, which allows remote attackers to cause a denial of service (disruption) by sending a packet with a zero-origin timestamp causing the association to reset and setting the contents of the packet as the most recent timestamp. This issue is a result of an incomplete fix for CVE-2015-7704.

The protocol engine in ntp 4.2.6 before 4.2.8p11 allows a remote attackers to cause a denial of service (disruption) by continually sending a packet with a zero-origin timestamp and source IP address of the "other side" of an interleaved association causing the victim ntpd to reset its association.