In neomutt and mutt, the To and Cc email headers are not validated by cryptographic signing which allows an attacker that intercepts a message to change their value and include himself as a one of the recipients to compromise message confidentiality.

In mutt and neomutt the In-Reply-To email header field is not protected by cryptographic signing which allows an attacker to reuse an unencrypted but signed email message to impersonate the original sender.

Уязвимость платформ для архивирования корпоративной информации HashiCorp Vault и Vault Enterprise, связанная с неправильной проверкой или обработкой исключительных условий, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость алгоритма распределения данных Raft Consensus Algorithm хранилища Integrated storage (Raft) платформ для архивирования корпоративной информации HashiCorp Vault и Vault Enterprise, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость платформ для архивирования корпоративной информации HashiCorp Vault и Vault Enterprise, связанная с неправильным назначением привилегий, позволяющая нарушителю повысить свои привилегии

Vault and Vault Enterprise did not properly handle requests originating from unauthorized IP addresses when the TCP listener option, proxy_protocol_behavior, was set to deny_unauthorized. When receiving a request from a source IP address that was not listed in proxy_protocol_authorized_addrs, the Vault API server would shut down and no longer respond to any HTTP requests, potentially resulting in denial of service. While this bug also affected versions of Vault up to 1.17.1 and 1.16.5, a separate regression in those release series did not allow Vault operators to configure the deny_unauthorized option, thus not allowing the conditions for the denial of service to occur. Fixed in Vault and Vault Enterprise 1.17.2, 1.16.6, and 1.15.12.

Vault Community and Vault Enterprise (“Vault”) clusters using Vault’s Integrated Storage backend are vulnerable to a denial-of-service (DoS) attack through memory exhaustion through a Raft cluster join API endpoint . An attacker may send a large volume of requests to the endpoint which may cause Vault to consume excessive system memory resources, potentially leading to a crash of the underlying system and the Vault process itself. This vulnerability, CVE-2024-8185, is fixed in Vault Community 1.18.1 and Vault Enterprise 1.18.1, 1.17.8, and 1.16.12.

A privileged Vault operator with write permissions to the root namespace’s identity endpoint could escalate their own or another user’s privileges to Vault’s root policy. Fixed in Vault Community Edition 1.18.0 and Vault Enterprise 1.18.0, 1.17.7, 1.16.11, and 1.15.16.

Необходимо закрыть CVE-2024-8185, CVE-2024-9180, CVE-2024-6468

Уязвимость функции smb2_write() модуля fs/ksmbd/smb2pdu.c, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции ksmbd_vfs_stream_read() демона KSMBD ядра операционной системы Linux, позволяющая нарушителю раскрыть защищаемую информацию и вызвать отказ в обслуживании

Уязвимость функции xsk_map_delete_elem ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when the ring is being stopped. Depending on timing between ring stop request completion, interrupt handler removal and code execution this may lead to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run after the io_data pointer is set to NULL in hci_dma_cleanup(). Prevent this my masking the ring interrupts before ring stop request.

In the Linux kernel, the following vulnerability has been resolved: pinmux: Use sequential access to access desc->pinmux data When two client of the same gpio call pinctrl_select_state() for the same functionality, we are seeing NULL pointer issue while accessing desc->mux_owner. Let's say two processes A, B executing in pin_request() for the same pin and process A updates the desc->mux_usecount but not yet updated the desc->mux_owner while process B see the desc->mux_usecount which got updated by A path and further executes strcmp and while accessing desc->mux_owner it crashes with NULL pointer. Serialize the access to mux related setting with a mutex lock. cpu0 (process A) cpu1(process B) pinctrl_select_state() { pinctrl_select_state() { pin_request() { pin_request() { ... .... } else { desc->mux_usecount++; desc->mux_usecount && strcmp(desc->mux_owner, owner)) { if (desc->mux_usecount > 1) return 0; desc->mux_owner = owner; } }

In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_bucket() (A) dma_entry_hash check_sync() (A) radix_lock() (W) dma_entry_hash dma_entry_free() (W) radix_lock() // CPU2's one (W) rq_lock() CPU1 situation can happen when it extending radix tree and it tries to wake up kswapd via wake_all_kswapd(). CPU2 situation can happen while perf_event_task_sched_out() (i.e. dma sync operation is called while deleting perf_event using etm and etr tmc which are Arm Coresight hwtracing driver backends). To remove this possible situation, call dma_entry_free() after put_hash_bucket() in check_unmap().

In the Linux kernel, the following vulnerability has been resolved: dlm: fix possible lkb_resource null dereference This patch fixes a possible null pointer dereference when this function is called from request_lock() as lkb->lkb_resource is not assigned yet, only after validate_lock_args() by calling attach_lkb(). Another issue is that a resource name could be a non printable bytearray and we cannot assume to be ASCII coded. The log functionality is probably never being hit when DLM is used in normal way and no debug logging is enabled. The null pointer dereference can only occur on a new created lkb that does not have the resource assigned yet, it probably never hits the null pointer dereference but we should be sure that other changes might not change this behaviour and we actually can hit the mentioned null pointer dereference. In this patch we just drop the printout of the resource name, the lkb id is enough to make a possible connection to a resource name if this exists.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: check return value of ieee80211_probereq_get() for RNR The return value of ieee80211_probereq_get() might be NULL, so check it before using to avoid NULL pointer access. Addresses-Coverity-ID: 1529805 ("Dereference null return value")

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't take dev_replace rwsem on task already holding it Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of the RAID stripe-tree, we get the following splat from lockdep: BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started ============================================ WARNING: possible recursive locking detected 6.11.0-rc3-btrfs-for-next #599 Not tainted -------------------------------------------- btrfs/2326 is trying to acquire lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 but task is already holding lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&fs_info->dev_replace.rwsem); lock(&fs_info->dev_replace.rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by btrfs/2326: #0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 stack backtrace: CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack_lvl+0x5b/0x80 __lock_acquire+0x2798/0x69d0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x19d/0x4a0 ? btrfs_map_block+0x39f/0x2250 ? __pfx_lock_acquire+0x10/0x10 ? find_held_lock+0x2d/0x110 ? lock_is_held_type+0x8f/0x100 down_read+0x8e/0x440 ? btrfs_map_block+0x39f/0x2250 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x39f/0x2250 ? btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? btrfs_bio_counter_inc_blocked+0xd9/0x2e0 ? __kasan_slab_alloc+0x6e/0x70 ? __pfx_btrfs_map_block+0x10/0x10 ? __pfx_btrfs_bio_counter_inc_blocked+0x10/0x10 ? kmem_cache_alloc_noprof+0x1f2/0x300 ? mempool_alloc_noprof+0xed/0x2b0 btrfs_submit_chunk+0x28d/0x17e0 ? __pfx_btrfs_submit_chunk+0x10/0x10 ? bvec_alloc+0xd7/0x1b0 ? bio_add_folio+0x171/0x270 ? __pfx_bio_add_folio+0x10/0x10 ? __kasan_check_read+0x20/0x20 btrfs_submit_bio+0x37/0x80 read_extent_buffer_pages+0x3df/0x6c0 btrfs_read_extent_buffer+0x13e/0x5f0 read_tree_block+0x81/0xe0 read_block_for_search+0x4bd/0x7a0 ? __pfx_read_block_for_search+0x10/0x10 btrfs_search_slot+0x78d/0x2720 ? __pfx_btrfs_search_slot+0x10/0x10 ? lock_is_held_type+0x8f/0x100 ? kasan_save_track+0x14/0x30 ? __kasan_slab_alloc+0x6e/0x70 ? kmem_cache_alloc_noprof+0x1f2/0x300 btrfs_get_raid_extent_offset+0x181/0x820 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_btrfs_get_raid_extent_offset+0x10/0x10 ? down_read+0x194/0x440 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x5b5/0x2250 ? __pfx_btrfs_map_block+0x10/0x10 scrub_submit_initial_read+0x8fe/0x11b0 ? __pfx_scrub_submit_initial_read+0x10/0x10 submit_initial_group_read+0x161/0x3a0 ? lock_release+0x20e/0x710 ? __pfx_submit_initial_group_read+0x10/0x10 ? __pfx_lock_release+0x10/0x10 scrub_simple_mirror.isra.0+0x3eb/0x580 scrub_stripe+0xe4d/0x1440 ? lock_release+0x20e/0x710 ? __pfx_scrub_stripe+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 scrub_chunk+0x257/0x4a0 scrub_enumerate_chunks+0x64c/0xf70 ? __mutex_unlock_slowpath+0x147/0x5f0 ? __pfx_scrub_enumerate_chunks+0x10/0x10 ? bit_wait_timeout+0xb0/0x170 ? __up_read+0x189/0x700 ? scrub_workers_get+0x231/0x300 ? up_write+0x490/0x4f0 btrfs_scrub_dev+0x52e/0xcd0 ? create_pending_snapshots+0x230/0x250 ? __pfx_btrfs_scrub_dev+0x10/0x10 btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? lock_acquire+0x19d/0x4a0 ? __pfx_btrfs_dev_replace_by_ioctl+0x10/0x10 ? ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: Add cancel_work_sync before module remove If we remove the module which will call mpc52xx_spi_remove it will free 'ms' through spi_unregister_controller. while the work ms->work will be used. The sequence of operations that may lead to a UAF bug. Fix it by ensuring that the work is canceled before proceeding with the cleanup in mpc52xx_spi_remove.

In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory.

In the Linux kernel, the following vulnerability has been resolved: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree When the value of lp is 0 at the beginning of the for loop, it will become negative in the next assignment and we should bail out.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case.

In the Linux kernel, the following vulnerability has been resolved: jfs: array-index-out-of-bounds fix in dtReadFirst The value of stbl can be sometimes out of bounds due to a bad filesystem. Added a check with appopriate return of error code in that case.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: avoid NULL pointer error during sdio remove When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189

In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.

In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error.

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error.

In the Linux kernel, the following vulnerability has been resolved: net: af_can: do not leave a dangling sk pointer in can_create() On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code.

In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create' An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13 [ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020 [ 65.920527] Call Trace: [ 65.920529] [ 65.920532] dump_stack_lvl+0x48/0x70 [ 65.920541] dump_stack+0x10/0x20 [ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0 [ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu] [ 65.921009] link_create+0x6d3/0xed0 [amdgpu] [ 65.921355] create_links+0x18a/0x4e0 [amdgpu] [ 65.921679] dc_create+0x360/0x720 [amdgpu] [ 65.921999] ? dmi_matches+0xa0/0x220 [ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu] [ 65.922342] ? console_unlock+0x77/0x120 [ 65.922348] ? dev_printk_emit+0x86/0xb0 [ 65.922354] dm_hw_init+0x15/0x40 [amdgpu] [ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu] [ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu] [ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu] [ 65.923087] local_pci_probe+0x4b/0xb0 [ 65.923087] pci_device_probe+0xc8/0x280 [ 65.923087] really_probe+0x187/0x300 [ 65.923087] __driver_probe_device+0x85/0x130 [ 65.923087] driver_probe_device+0x24/0x110 [ 65.923087] __driver_attach+0xac/0x1d0 [ 65.923087] ? __pfx___driver_attach+0x10/0x10 [ 65.923087] bus_for_each_dev+0x7d/0xd0 [ 65.923087] driver_attach+0x1e/0x30 [ 65.923087] bus_add_driver+0xf2/0x200 [ 65.923087] driver_register+0x64/0x130 [ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 65.923087] __pci_register_driver+0x61/0x70 [ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu] [ 65.923087] do_one_initcall+0x49/0x310 [ 65.923087] ? kmalloc_trace+0x136/0x360 [ 65.923087] do_init_module+0x6a/0x270 [ 65.923087] load_module+0x1fce/0x23a0 [ 65.923087] init_module_from_file+0x9c/0xe0 [ 65.923087] ? init_module_from_file+0x9c/0xe0 [ 65.923087] idempotent_init_module+0x179/0x230 [ 65.923087] __x64_sys_finit_module+0x5d/0xa0 [ 65.923087] do_syscall_64+0x76/0x120 [ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 65.923087] RIP: 0033:0x7f2d80f1e88d [ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d [ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f [ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002 [ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480 [ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0 [ 65.923087] [ 65.923927] ---[ end trace ]---

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM We currently assume that there is at least one VMA in a MM, which isn't true. So we might end up having find_vma() return NULL, to then de-reference NULL. So properly handle find_vma() returning NULL. This fixes the report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline] RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194 Code: ... RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000 RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044 RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1 R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003 R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8 FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709 __do_sys_migrate_pages mm/mempolicy.c:1727 [inline] __se_sys_migrate_pages mm/mempolicy.c:1723 [inline] __x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [akpm@linux-foundation.org: add unlikely()]

In the Linux kernel, the following vulnerability has been resolved: mm/gup: handle NULL pages in unpin_user_pages() The recent addition of "pofs" (pages or folios) handling to gup has a flaw: it assumes that unpin_user_pages() handles NULL pages in the pages** array. That's not the case, as I discovered when I ran on a new configuration on my test machine. Fix this by skipping NULL pages in unpin_user_pages(), just like unpin_folios() already does. Details: when booting on x86 with "numa=fake=2 movablecore=4G" on Linux 6.12, and running this: tools/testing/selftests/mm/gup_longterm ...I get the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:sanity_check_pinned_pages+0x3a/0x2d0 ... Call Trace: ? __die_body+0x66/0xb0 ? page_fault_oops+0x30c/0x3b0 ? do_user_addr_fault+0x6c3/0x720 ? irqentry_enter+0x34/0x60 ? exc_page_fault+0x68/0x100 ? asm_exc_page_fault+0x22/0x30 ? sanity_check_pinned_pages+0x3a/0x2d0 unpin_user_pages+0x24/0xe0 check_and_migrate_movable_pages_or_folios+0x455/0x4b0 __gup_longterm_locked+0x3bf/0x820 ? mmap_read_lock_killable+0x12/0x50 ? __pfx_mmap_read_lock_killable+0x10/0x10 pin_user_pages+0x66/0xa0 gup_test_ioctl+0x358/0xb20 __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: sched/numa: fix memory leak due to the overwritten vma->numab_state [Problem Description] When running the hackbench program of LTP, the following memory leak is reported by kmemleak. # /opt/ltp/testcases/bin/hackbench 20 thread 1000 Running with 20*40 (== 800) tasks. # dmesg | grep kmemleak ... kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888cd8ca2c40 (size 64): comm "hackbench", pid 17142, jiffies 4299780315 hex dump (first 32 bytes): ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc bff18fd4): [] __kmalloc_cache_noprof+0x2f9/0x3f0 [] task_numa_work+0x725/0xa00 [] task_work_run+0x58/0x90 [] syscall_exit_to_user_mode+0x1c8/0x1e0 [] do_syscall_64+0x85/0x150 [] entry_SYSCALL_64_after_hwframe+0x76/0x7e ... This issue can be consistently reproduced on three different servers: * a 448-core server * a 256-core server * a 192-core server [Root Cause] Since multiple threads are created by the hackbench program (along with the command argument 'thread'), a shared vma might be accessed by two or more cores simultaneously. When two or more cores observe that vma->numab_state is NULL at the same time, vma->numab_state will be overwritten. Although current code ensures that only one thread scans the VMAs in a single 'numa_scan_period', there might be a chance for another thread to enter in the next 'numa_scan_period' while we have not gotten till numab_state allocation [1]. Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000` cannot the reproduce the issue. It is verified with 200+ test runs. [Solution] Use the cmpxchg atomic operation to ensure that only one thread executes the vma->numab_state assignment. [1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/

In the Linux kernel, the following vulnerability has been resolved: xsk: fix OOB map writes when deleting elements Jordy says: " In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check: if (k >= map->max_entries) return -EINVAL; This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access. spin_lock_bh(&m->lock); map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry); spin_unlock_bh(&m->lock); The xchg operation can then be used to cause an out-of-bounds write. Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption. " It indeed results in following splat: [76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace: [76613.046331] [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: fix OOB devmap writes when deleting elements Jordy reported issue against XSKMAP which also applies to DEVMAP - the index used for accessing map entry, due to being a signed integer, causes the OOB writes. Fix is simple as changing the type from int to u32, however, when compared to XSKMAP case, one more thing needs to be addressed. When map is released from system via dev_map_free(), we iterate through all of the entries and an iterator variable is also an int, which implies OOB accesses. Again, change it to be u32. Example splat below: [ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000 [ 160.731662] #PF: supervisor read access in kernel mode [ 160.736876] #PF: error_code(0x0000) - not-present page [ 160.742095] PGD 0 P4D 0 [ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP [ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487 [ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 160.767642] Workqueue: events_unbound bpf_map_free_deferred [ 160.773308] RIP: 0010:dev_map_free+0x77/0x170 [ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff [ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202 [ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024 [ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000 [ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001 [ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122 [ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000 [ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000 [ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0 [ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.874092] PKRU: 55555554 [ 160.876847] Call Trace: [ 160.879338] [ 160.881477] ? __die+0x20/0x60 [ 160.884586] ? page_fault_oops+0x15a/0x450 [ 160.888746] ? search_extable+0x22/0x30 [ 160.892647] ? search_bpf_extables+0x5f/0x80 [ 160.896988] ? exc_page_fault+0xa9/0x140 [ 160.900973] ? asm_exc_page_fault+0x22/0x30 [ 160.905232] ? dev_map_free+0x77/0x170 [ 160.909043] ? dev_map_free+0x58/0x170 [ 160.912857] bpf_map_free_deferred+0x51/0x90 [ 160.917196] process_one_work+0x142/0x370 [ 160.921272] worker_thread+0x29e/0x3b0 [ 160.925082] ? rescuer_thread+0x4b0/0x4b0 [ 160.929157] kthread+0xd4/0x110 [ 160.932355] ? kthread_park+0x80/0x80 [ 160.936079] ret_from_fork+0x2d/0x50 [ 160.943396] ? kthread_park+0x80/0x80 [ 160.950803] ret_from_fork_asm+0x11/0x20 [ 160.958482]

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU Commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU") adds functionality that architectures can use to optionally allocate and build cacheinfo early during boot. Commit 6539cffa9495 ("cacheinfo: Add arch specific early level initializer") lets secondary CPUs correct (and reallocate memory) cacheinfo data if needed. If the early build functionality is not used and cacheinfo does not need correction, memory for cacheinfo is never allocated. x86 does not use the early build functionality. Consequently, during the cacheinfo CPU hotplug callback, last_level_cache_is_valid() attempts to dereference a NULL pointer: BUG: kernel NULL pointer dereference, address: 0000000000000100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not present page PGD 0 P4D 0 Oops: 0000 [#1] PREEPMT SMP NOPTI CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1 RIP: 0010: last_level_cache_is_valid+0x95/0xe0a Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback if not done earlier. Moreover, before determining the validity of the last-level cache info, ensure that it has been allocated. Simply checking for non-zero cache_leaves() is not sufficient, as some architectures (e.g., Intel processors) have non-zero cache_leaves() before allocation. Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size(). This function iterates over all online CPUs. However, a CPU may have come online recently, but its cacheinfo may not have been allocated yet. While here, remove an unnecessary indentation in allocate_cache_info(). [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: gpcv2: Adjust delay after power up handshake The udelay(5) is not enough, sometimes below kernel panic still be triggered: [ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt [ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1 [ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT) [ 4.012985] Call trace: [...] [ 4.013029] arm64_serror_panic+0x64/0x70 [ 4.013034] do_serror+0x3c/0x70 [ 4.013039] el1h_64_error_handler+0x30/0x54 [ 4.013046] el1h_64_error+0x64/0x68 [ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48 [ 4.013059] __genpd_runtime_resume+0x30/0x80 [ 4.013066] genpd_runtime_resume+0x114/0x29c [ 4.013073] __rpm_callback+0x48/0x1e0 [ 4.013079] rpm_callback+0x68/0x80 [ 4.013084] rpm_resume+0x3bc/0x6a0 [ 4.013089] __pm_runtime_resume+0x50/0x9c [ 4.013095] pm_runtime_get_suppliers+0x60/0x8c [ 4.013101] __driver_probe_device+0x4c/0x14c [ 4.013108] driver_probe_device+0x3c/0x120 [ 4.013114] __driver_attach+0xc4/0x200 [ 4.013119] bus_for_each_dev+0x7c/0xe0 [ 4.013125] driver_attach+0x24/0x30 [ 4.013130] bus_add_driver+0x110/0x240 [ 4.013135] driver_register+0x68/0x124 [ 4.013142] __platform_driver_register+0x24/0x30 [ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma] [ 4.013163] do_one_initcall+0x60/0x1e0 [ 4.013168] do_init_module+0x5c/0x21c [ 4.013175] load_module+0x1a98/0x205c [ 4.013181] init_module_from_file+0x88/0xd4 [ 4.013187] __arm64_sys_finit_module+0x258/0x350 [ 4.013194] invoke_syscall.constprop.0+0x50/0xe0 [ 4.013202] do_el0_svc+0xa8/0xe0 [ 4.013208] el0_svc+0x3c/0x140 [ 4.013215] el0t_64_sync_handler+0x120/0x12c [ 4.013222] el0t_64_sync+0x190/0x194 [ 4.013228] SMP: stopping secondary CPUs The correct way is to wait handshake, but it needs BUS clock of BLK-CTL be enabled, which is in separate driver. So delay is the only option here. The udelay(10) is a data got by experiment.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: qcom: Only free platform MSIs when ESI is enabled Otherwise, it will result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 platform_device_msi_free_irqs_all+0x14/0x20 ufs_qcom_remove+0x34/0x48 [ufs_qcom] platform_remove+0x28/0x44 device_remove+0x4c/0x80 device_release_driver_internal+0xd8/0x178 driver_detach+0x50/0x9c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom] __arm64_sys_delete_module+0x180/0x260 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Cancel RTC work during ufshcd_remove() Currently, RTC work is only cancelled during __ufshcd_wl_suspend(). When ufshcd is removed in ufshcd_remove(), RTC work is not cancelled. Due to this, any further trigger of the RTC work after ufshcd_remove() would result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 00000000000002a4 Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c pm_runtime_get_if_active+0x24/0xb4 ufshcd_rtc_work+0x124/0x19c process_scheduled_works+0x18c/0x2d8 worker_thread+0x144/0x280 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Since RTC work accesses the ufshcd internal structures, it should be cancelled when ufshcd is removed. So do that in ufshcd_remove(), as per the order in ufshcd_init().

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: sysfs: Prevent div by zero Prevent a division by 0 when monitoring is not enabled.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Write in ksmbd_vfs_stream_write An offset from client could be a negative value, It could allows to write data outside the bounds of the allocated buffer. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read An offset from client could be a negative value, It could lead to an out-of-bounds read from the stream_buf. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf.

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix when get product name maybe null pointer Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release().

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix the memleak while create new ctrl failed Now while we create new ctrl failed, we have not free the tagset occupied by admin_q, here try to fix it.

In the Linux kernel, the following vulnerability has been resolved: gpio: grgpio: Add NULL check in grgpio_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in grgpio_probe is not checked. Add NULL check in grgpio_probe, to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: net: avoid potential UAF in default_operstate() syzbot reported an UAF in default_operstate() [1] Issue is a race between device and netns dismantles. After calling __rtnl_unlock() from netdev_run_todo(), we can not assume the netns of each device is still alive. Make sure the device is not in NETREG_UNREGISTERED state, and add an ASSERT_RTNL() before the call to __dev_get_by_index(). We might move this ASSERT_RTNL() in __dev_get_by_index() in the future. [1] BUG: KASAN: slab-use-after-free in __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 Read of size 8 at addr ffff888043eba1b0 by task syz.0.0/5339 CPU: 0 UID: 0 PID: 5339 Comm: syz.0.0 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 default_operstate net/core/link_watch.c:51 [inline] rfc2863_policy+0x224/0x300 net/core/link_watch.c:67 linkwatch_do_dev+0x3e/0x170 net/core/link_watch.c:170 netdev_run_todo+0x461/0x1000 net/core/dev.c:10894 rtnl_unlock net/core/rtnetlink.c:152 [inline] rtnl_net_unlock include/linux/rtnetlink.h:133 [inline] rtnl_dellink+0x760/0x8d0 net/core/rtnetlink.c:3520 rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2a3cb80809 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2a3d9cd058 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2a3cd45fa0 RCX: 00007f2a3cb80809 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008 RBP: 00007f2a3cbf393e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f2a3cd45fa0 R15: 00007ffd03bc65c8 Allocated by task 5339: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kmalloc_array_noprof include/linux/slab.h:945 [inline] netdev_create_hash net/core/dev.c:11870 [inline] netdev_init+0x10c/0x250 net/core/dev.c:11890 ops_init+0x31e/0x590 net/core/net_namespace.c:138 setup_net+0x287/0x9e0 net/core/net_namespace.c:362 copy_net_ns+0x33f/0x570 net/core/net_namespace.c:500 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x57d/0xa70 kernel/fork.c:3314 __do_sys_unshare kernel/fork.c:3385 [inline] __se_sys_unshare kernel/fork.c:3383 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3383 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x8 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix LGR and link use-after-free issue We encountered a LGR/link use-after-free issue, which manifested as the LGR/link refcnt reaching 0 early and entering the clear process, making resource access unsafe. refcount_t: addition on 0; use-after-free. WARNING: CPU: 14 PID: 107447 at lib/refcount.c:25 refcount_warn_saturate+0x9c/0x140 Workqueue: events smc_lgr_terminate_work [smc] Call trace: refcount_warn_saturate+0x9c/0x140 __smc_lgr_terminate.part.45+0x2a8/0x370 [smc] smc_lgr_terminate_work+0x28/0x30 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 or refcount_t: underflow; use-after-free. WARNING: CPU: 6 PID: 93140 at lib/refcount.c:28 refcount_warn_saturate+0xf0/0x140 Workqueue: smc_hs_wq smc_listen_work [smc] Call trace: refcount_warn_saturate+0xf0/0x140 smcr_link_put+0x1cc/0x1d8 [smc] smc_conn_free+0x110/0x1b0 [smc] smc_conn_abort+0x50/0x60 [smc] smc_listen_find_device+0x75c/0x790 [smc] smc_listen_work+0x368/0x8a0 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 It is caused by repeated release of LGR/link refcnt. One suspect is that smc_conn_free() is called repeatedly because some smc_conn_free() from server listening path are not protected by sock lock. e.g. Calls under socklock | smc_listen_work ------------------------------------------------------- lock_sock(sk) | smc_conn_abort smc_conn_free | \- smc_conn_free \- smcr_link_put | \- smcr_link_put (duplicated) release_sock(sk) So here add sock lock protection in smc_listen_work() path, making it exclusive with other connection operations.

In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free of kernel socket in cleanup_bearer(). syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1] When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer(). tipc_exit_net() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free. Let's move the decrement after releasing the socket in cleanup_bearer(). [0]: ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0 __sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848 __tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898 ____sys_sendmsg+0x500/0x830 [1]: BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489 __sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer

In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid possible NULL deref in modify_prefix_route() syzbot found a NULL deref [1] in modify_prefix_route(), caused by one fib6_info without a fib6_table pointer set. This can happen for net->ipv6.fib6_null_entry [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 UID: 0 PID: 5837 Comm: syz-executor888 Not tainted 6.12.0-syzkaller-09567-g7eef7e306d3c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__lock_acquire+0xe4/0x3c40 kernel/locking/lockdep.c:5089 Code: 08 84 d2 0f 85 15 14 00 00 44 8b 0d ca 98 f5 0e 45 85 c9 0f 84 b4 0e 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 96 2c 00 00 49 8b 04 24 48 3d a0 07 7f 93 0f 84 RSP: 0018:ffffc900035d7268 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000006 RSI: 1ffff920006bae5f RDI: 0000000000000030 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: ffffffff90608e17 R11: 0000000000000001 R12: 0000000000000030 R13: ffff888036334880 R14: 0000000000000000 R15: 0000000000000000 FS: 0000555579e90380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc59cc4278 CR3: 0000000072b54000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5849 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x33/0x40 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] modify_prefix_route+0x30b/0x8b0 net/ipv6/addrconf.c:4831 inet6_addr_modify net/ipv6/addrconf.c:4923 [inline] inet6_rtm_newaddr+0x12c7/0x1ab0 net/ipv6/addrconf.c:5055 rtnetlink_rcv_msg+0x3c7/0xea0 net/core/rtnetlink.c:6920 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2583 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2637 __sys_sendmsg+0x16e/0x220 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fd1dcef8b79 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc59cc4378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd1dcef8b79 RDX: 0000000000040040 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00000000000113fd R08: 0000000000000006 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007ffc59cc438c R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001

In the Linux kernel, the following vulnerability has been resolved: net: Fix icmp host relookup triggering ip_rt_bug arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid potential out-of-bound access in fill_frame_info() syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: net: enetc: Do not configure preemptible TCs if SIs do not support Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs() to configure preemptible TCs. However, only PF is able to configure preemptible TCs. Because only PF has related registers, while VF does not have these registers. So for VF, its hw->port pointer is NULL. Therefore, VF will access an invalid pointer when accessing a non-existent register, which will cause a crash issue. The simplified log is as follows. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Call trace: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ end trace 0000000000000000 ]--- In addition, some PFs also do not support configuring preemptible TCs, such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs, but we should prevent these PFs from accessing these unimplemented registers.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.

In the Linux kernel, the following vulnerability has been resolved: can: hi311x: hi3110_can_ist(): fix potential use-after-free The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off") removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off). The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused. Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting.

In the Linux kernel, the following vulnerability has been resolved: powerpc/prom_init: Fixup missing powermac #size-cells On some powermacs `escc` nodes are missing `#size-cells` properties, which is deprecated and now triggers a warning at boot since commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"). For example: Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000 WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108 Hardware name: PowerMac3,1 7400 0xc0209 PowerMac ... Call Trace: of_bus_n_size_cells+0x98/0x108 (unreliable) of_bus_default_count_cells+0x40/0x60 __of_get_address+0xc8/0x21c __of_address_to_resource+0x5c/0x228 pmz_init_port+0x5c/0x2ec pmz_probe.isra.0+0x144/0x1e4 pmz_console_init+0x10/0x48 console_init+0xcc/0x138 start_kernel+0x5c4/0x694 As powermacs boot via prom_init it's possible to add the missing properties to the device tree during boot, avoiding the warning. Note that `escc-legacy` nodes are also missing `#size-cells` properties, but they are skipped by the macio driver, so leave them alone. Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling")

In the Linux kernel, the following vulnerability has been resolved: ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration() acpi_dev_hid_match() does not check for adev == NULL, dereferencing it unconditional. Add a check for adev being NULL before calling acpi_dev_hid_match(). At the moment acpi_quirk_skip_serdev_enumeration() is never called with a controller_parent without an ACPI companion, but better safe than sorry.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to restrict this maximum depth to a more reasonable value not to harm performance. Remove unnecessary WARN_ON_ONCE which is reachable from userspace.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adding array index check to prevent memory corruption [Why & How] Array indices out of bound caused memory corruption. Adding checks to ensure that array index stays in bound.

In the Linux kernel, the following vulnerability has been resolved: MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a Fix the dtc warnings: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"): WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0 Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0 The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a"), which has fixed the issue for ls2k (despite its subject mentions ls7a).

In the Linux kernel, the following vulnerability has been resolved: bpf: put bpf_link's program when link is safe to be deallocated In general, BPF link's underlying BPF program should be considered to be reachable through attach hook -> link -> prog chain, and, pessimistically, we have to assume that as long as link's memory is not safe to free, attach hook's code might hold a pointer to BPF program and use it. As such, it's not (generally) correct to put link's program early before waiting for RCU GPs to go through. More eager bpf_prog_put() that we currently do is mostly correct due to BPF program's release code doing similar RCU GP waiting, but as will be shown in the following patches, BPF program can be non-sleepable (and, thus, reliant on only "classic" RCU GP), while BPF link's attach hook can have sleepable semantics and needs to be protected by RCU Tasks Trace, and for such cases BPF link has to go through RCU Tasks Trace + "classic" RCU GPs before being deallocated. And so, if we put BPF program early, we might free BPF program before we free BPF link, leading to use-after-free situation. So, this patch defers bpf_prog_put() until we are ready to perform bpf_link's deallocation. At worst, this delays BPF program freeing by one extra RCU GP, but that seems completely acceptable. Alternatively, we'd need more elaborate ways to determine BPF hook, BPF link, and BPF program lifetimes, and how they relate to each other, which seems like an unnecessary complication. Note, for most BPF links we still will perform eager bpf_prog_put() and link dealloc, so for those BPF links there are no observable changes whatsoever. Only BPF links that use deferred dealloc might notice slightly delayed freeing of BPF programs. Also, to reduce code and logic duplication, extract program put + link dealloc logic into bpf_link_dealloc() helper.

In the Linux kernel, the following vulnerability has been resolved: soc: imx8m: Probe the SoC driver as platform driver With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe. Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later. " ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace: imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1 "

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove() This will ensure that the scsi host is cleaned up properly using scsi_host_dev_release(). Otherwise, it may lead to memory leaks.

In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case.

In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_POE Currently poe_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.por_el0, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of POR_EL1 will be retained. Before this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50 After this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d

In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d

Уязвимость функции smb2_write() модуля fs/ksmbd/smb2pdu.c, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации.

Уязвимость функции ksmbd_vfs_stream_read() демона KSMBD ядра операционной системы Linux, позволяющая нарушителю раскрыть защищаемую информацию и вызвать отказ в обслуживании

Уязвимость функции xsk_map_delete_elem ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when the ring is being stopped. Depending on timing between ring stop request completion, interrupt handler removal and code execution this may lead to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run after the io_data pointer is set to NULL in hci_dma_cleanup(). Prevent this my masking the ring interrupts before ring stop request.

In the Linux kernel, the following vulnerability has been resolved: pinmux: Use sequential access to access desc->pinmux data When two client of the same gpio call pinctrl_select_state() for the same functionality, we are seeing NULL pointer issue while accessing desc->mux_owner. Let's say two processes A, B executing in pin_request() for the same pin and process A updates the desc->mux_usecount but not yet updated the desc->mux_owner while process B see the desc->mux_usecount which got updated by A path and further executes strcmp and while accessing desc->mux_owner it crashes with NULL pointer. Serialize the access to mux related setting with a mutex lock. cpu0 (process A) cpu1(process B) pinctrl_select_state() { pinctrl_select_state() { pin_request() { pin_request() { ... .... } else { desc->mux_usecount++; desc->mux_usecount && strcmp(desc->mux_owner, owner)) { if (desc->mux_usecount > 1) return 0; desc->mux_owner = owner; } }

In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_bucket() (A) dma_entry_hash check_sync() (A) radix_lock() (W) dma_entry_hash dma_entry_free() (W) radix_lock() // CPU2's one (W) rq_lock() CPU1 situation can happen when it extending radix tree and it tries to wake up kswapd via wake_all_kswapd(). CPU2 situation can happen while perf_event_task_sched_out() (i.e. dma sync operation is called while deleting perf_event using etm and etr tmc which are Arm Coresight hwtracing driver backends). To remove this possible situation, call dma_entry_free() after put_hash_bucket() in check_unmap().

In the Linux kernel, the following vulnerability has been resolved: dlm: fix possible lkb_resource null dereference This patch fixes a possible null pointer dereference when this function is called from request_lock() as lkb->lkb_resource is not assigned yet, only after validate_lock_args() by calling attach_lkb(). Another issue is that a resource name could be a non printable bytearray and we cannot assume to be ASCII coded. The log functionality is probably never being hit when DLM is used in normal way and no debug logging is enabled. The null pointer dereference can only occur on a new created lkb that does not have the resource assigned yet, it probably never hits the null pointer dereference but we should be sure that other changes might not change this behaviour and we actually can hit the mentioned null pointer dereference. In this patch we just drop the printout of the resource name, the lkb id is enough to make a possible connection to a resource name if this exists.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: check return value of ieee80211_probereq_get() for RNR The return value of ieee80211_probereq_get() might be NULL, so check it before using to avoid NULL pointer access. Addresses-Coverity-ID: 1529805 ("Dereference null return value")

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't take dev_replace rwsem on task already holding it Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of the RAID stripe-tree, we get the following splat from lockdep: BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started ============================================ WARNING: possible recursive locking detected 6.11.0-rc3-btrfs-for-next #599 Not tainted -------------------------------------------- btrfs/2326 is trying to acquire lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 but task is already holding lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&fs_info->dev_replace.rwsem); lock(&fs_info->dev_replace.rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by btrfs/2326: #0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 stack backtrace: CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack_lvl+0x5b/0x80 __lock_acquire+0x2798/0x69d0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x19d/0x4a0 ? btrfs_map_block+0x39f/0x2250 ? __pfx_lock_acquire+0x10/0x10 ? find_held_lock+0x2d/0x110 ? lock_is_held_type+0x8f/0x100 down_read+0x8e/0x440 ? btrfs_map_block+0x39f/0x2250 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x39f/0x2250 ? btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? btrfs_bio_counter_inc_blocked+0xd9/0x2e0 ? __kasan_slab_alloc+0x6e/0x70 ? __pfx_btrfs_map_block+0x10/0x10 ? __pfx_btrfs_bio_counter_inc_blocked+0x10/0x10 ? kmem_cache_alloc_noprof+0x1f2/0x300 ? mempool_alloc_noprof+0xed/0x2b0 btrfs_submit_chunk+0x28d/0x17e0 ? __pfx_btrfs_submit_chunk+0x10/0x10 ? bvec_alloc+0xd7/0x1b0 ? bio_add_folio+0x171/0x270 ? __pfx_bio_add_folio+0x10/0x10 ? __kasan_check_read+0x20/0x20 btrfs_submit_bio+0x37/0x80 read_extent_buffer_pages+0x3df/0x6c0 btrfs_read_extent_buffer+0x13e/0x5f0 read_tree_block+0x81/0xe0 read_block_for_search+0x4bd/0x7a0 ? __pfx_read_block_for_search+0x10/0x10 btrfs_search_slot+0x78d/0x2720 ? __pfx_btrfs_search_slot+0x10/0x10 ? lock_is_held_type+0x8f/0x100 ? kasan_save_track+0x14/0x30 ? __kasan_slab_alloc+0x6e/0x70 ? kmem_cache_alloc_noprof+0x1f2/0x300 btrfs_get_raid_extent_offset+0x181/0x820 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_btrfs_get_raid_extent_offset+0x10/0x10 ? down_read+0x194/0x440 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x5b5/0x2250 ? __pfx_btrfs_map_block+0x10/0x10 scrub_submit_initial_read+0x8fe/0x11b0 ? __pfx_scrub_submit_initial_read+0x10/0x10 submit_initial_group_read+0x161/0x3a0 ? lock_release+0x20e/0x710 ? __pfx_submit_initial_group_read+0x10/0x10 ? __pfx_lock_release+0x10/0x10 scrub_simple_mirror.isra.0+0x3eb/0x580 scrub_stripe+0xe4d/0x1440 ? lock_release+0x20e/0x710 ? __pfx_scrub_stripe+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 scrub_chunk+0x257/0x4a0 scrub_enumerate_chunks+0x64c/0xf70 ? __mutex_unlock_slowpath+0x147/0x5f0 ? __pfx_scrub_enumerate_chunks+0x10/0x10 ? bit_wait_timeout+0xb0/0x170 ? __up_read+0x189/0x700 ? scrub_workers_get+0x231/0x300 ? up_write+0x490/0x4f0 btrfs_scrub_dev+0x52e/0xcd0 ? create_pending_snapshots+0x230/0x250 ? __pfx_btrfs_scrub_dev+0x10/0x10 btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? lock_acquire+0x19d/0x4a0 ? __pfx_btrfs_dev_replace_by_ioctl+0x10/0x10 ? ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: Add cancel_work_sync before module remove If we remove the module which will call mpc52xx_spi_remove it will free 'ms' through spi_unregister_controller. while the work ms->work will be used. The sequence of operations that may lead to a UAF bug. Fix it by ensuring that the work is canceled before proceeding with the cleanup in mpc52xx_spi_remove.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Defer probe of clients after smmu device bound Null pointer dereference occurs due to a race between smmu driver probe and client driver probe, when of_dma_configure() for client is called after the iommu_device_register() for smmu driver probe has executed but before the driver_bound() for smmu driver has been called. Following is how the race occurs: T1:Smmu device probe T2: Client device probe really_probe() arm_smmu_device_probe() iommu_device_register() really_probe() platform_dma_configure() of_dma_configure() of_dma_configure_id() of_iommu_configure() iommu_probe_device() iommu_init_device() arm_smmu_probe_device() arm_smmu_get_by_fwnode() driver_find_device_by_fwnode() driver_find_device() next_device() klist_next() /* null ptr assigned to smmu */ /* null ptr dereference while smmu->streamid_mask */ driver_bound() klist_add_tail() When this null smmu pointer is dereferenced later in arm_smmu_probe_device, the device crashes. Fix this by deferring the probe of the client device until the smmu device has bound to the arm smmu driver. [will: Add comment]

In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory.

In the Linux kernel, the following vulnerability has been resolved: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree When the value of lp is 0 at the beginning of the for loop, it will become negative in the next assignment and we should bail out.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case.

In the Linux kernel, the following vulnerability has been resolved: jfs: array-index-out-of-bounds fix in dtReadFirst The value of stbl can be sometimes out of bounds due to a bad filesystem. Added a check with appopriate return of error code in that case.

In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.

In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error.

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error.

In the Linux kernel, the following vulnerability has been resolved: net: af_can: do not leave a dangling sk pointer in can_create() On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code.

In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM We currently assume that there is at least one VMA in a MM, which isn't true. So we might end up having find_vma() return NULL, to then de-reference NULL. So properly handle find_vma() returning NULL. This fixes the report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline] RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194 Code: ... RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000 RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044 RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1 R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003 R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8 FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709 __do_sys_migrate_pages mm/mempolicy.c:1727 [inline] __se_sys_migrate_pages mm/mempolicy.c:1723 [inline] __x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [akpm@linux-foundation.org: add unlikely()]

In the Linux kernel, the following vulnerability has been resolved: sched/numa: fix memory leak due to the overwritten vma->numab_state [Problem Description] When running the hackbench program of LTP, the following memory leak is reported by kmemleak. # /opt/ltp/testcases/bin/hackbench 20 thread 1000 Running with 20*40 (== 800) tasks. # dmesg | grep kmemleak ... kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888cd8ca2c40 (size 64): comm "hackbench", pid 17142, jiffies 4299780315 hex dump (first 32 bytes): ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc bff18fd4): [] __kmalloc_cache_noprof+0x2f9/0x3f0 [] task_numa_work+0x725/0xa00 [] task_work_run+0x58/0x90 [] syscall_exit_to_user_mode+0x1c8/0x1e0 [] do_syscall_64+0x85/0x150 [] entry_SYSCALL_64_after_hwframe+0x76/0x7e ... This issue can be consistently reproduced on three different servers: * a 448-core server * a 256-core server * a 192-core server [Root Cause] Since multiple threads are created by the hackbench program (along with the command argument 'thread'), a shared vma might be accessed by two or more cores simultaneously. When two or more cores observe that vma->numab_state is NULL at the same time, vma->numab_state will be overwritten. Although current code ensures that only one thread scans the VMAs in a single 'numa_scan_period', there might be a chance for another thread to enter in the next 'numa_scan_period' while we have not gotten till numab_state allocation [1]. Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000` cannot the reproduce the issue. It is verified with 200+ test runs. [Solution] Use the cmpxchg atomic operation to ensure that only one thread executes the vma->numab_state assignment. [1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/

In the Linux kernel, the following vulnerability has been resolved: xsk: fix OOB map writes when deleting elements Jordy says: " In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check: if (k >= map->max_entries) return -EINVAL; This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access. spin_lock_bh(&m->lock); map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry); spin_unlock_bh(&m->lock); The xchg operation can then be used to cause an out-of-bounds write. Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption. " It indeed results in following splat: [76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace: [76613.046331] [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: fix OOB devmap writes when deleting elements Jordy reported issue against XSKMAP which also applies to DEVMAP - the index used for accessing map entry, due to being a signed integer, causes the OOB writes. Fix is simple as changing the type from int to u32, however, when compared to XSKMAP case, one more thing needs to be addressed. When map is released from system via dev_map_free(), we iterate through all of the entries and an iterator variable is also an int, which implies OOB accesses. Again, change it to be u32. Example splat below: [ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000 [ 160.731662] #PF: supervisor read access in kernel mode [ 160.736876] #PF: error_code(0x0000) - not-present page [ 160.742095] PGD 0 P4D 0 [ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP [ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487 [ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 160.767642] Workqueue: events_unbound bpf_map_free_deferred [ 160.773308] RIP: 0010:dev_map_free+0x77/0x170 [ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff [ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202 [ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024 [ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000 [ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001 [ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122 [ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000 [ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000 [ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0 [ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.874092] PKRU: 55555554 [ 160.876847] Call Trace: [ 160.879338] [ 160.881477] ? __die+0x20/0x60 [ 160.884586] ? page_fault_oops+0x15a/0x450 [ 160.888746] ? search_extable+0x22/0x30 [ 160.892647] ? search_bpf_extables+0x5f/0x80 [ 160.896988] ? exc_page_fault+0xa9/0x140 [ 160.900973] ? asm_exc_page_fault+0x22/0x30 [ 160.905232] ? dev_map_free+0x77/0x170 [ 160.909043] ? dev_map_free+0x58/0x170 [ 160.912857] bpf_map_free_deferred+0x51/0x90 [ 160.917196] process_one_work+0x142/0x370 [ 160.921272] worker_thread+0x29e/0x3b0 [ 160.925082] ? rescuer_thread+0x4b0/0x4b0 [ 160.929157] kthread+0xd4/0x110 [ 160.932355] ? kthread_park+0x80/0x80 [ 160.936079] ret_from_fork+0x2d/0x50 [ 160.943396] ? kthread_park+0x80/0x80 [ 160.950803] ret_from_fork_asm+0x11/0x20 [ 160.958482]

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU Commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU") adds functionality that architectures can use to optionally allocate and build cacheinfo early during boot. Commit 6539cffa9495 ("cacheinfo: Add arch specific early level initializer") lets secondary CPUs correct (and reallocate memory) cacheinfo data if needed. If the early build functionality is not used and cacheinfo does not need correction, memory for cacheinfo is never allocated. x86 does not use the early build functionality. Consequently, during the cacheinfo CPU hotplug callback, last_level_cache_is_valid() attempts to dereference a NULL pointer: BUG: kernel NULL pointer dereference, address: 0000000000000100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not present page PGD 0 P4D 0 Oops: 0000 [#1] PREEPMT SMP NOPTI CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1 RIP: 0010: last_level_cache_is_valid+0x95/0xe0a Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback if not done earlier. Moreover, before determining the validity of the last-level cache info, ensure that it has been allocated. Simply checking for non-zero cache_leaves() is not sufficient, as some architectures (e.g., Intel processors) have non-zero cache_leaves() before allocation. Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size(). This function iterates over all online CPUs. However, a CPU may have come online recently, but its cacheinfo may not have been allocated yet. While here, remove an unnecessary indentation in allocate_cache_info(). [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: sysfs: Prevent div by zero Prevent a division by 0 when monitoring is not enabled.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Write in ksmbd_vfs_stream_write An offset from client could be a negative value, It could allows to write data outside the bounds of the allocated buffer. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read An offset from client could be a negative value, It could lead to an out-of-bounds read from the stream_buf. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf.

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix when get product name maybe null pointer Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release().

In the Linux kernel, the following vulnerability has been resolved: gpio: grgpio: Add NULL check in grgpio_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in grgpio_probe is not checked. Add NULL check in grgpio_probe, to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: net: avoid potential UAF in default_operstate() syzbot reported an UAF in default_operstate() [1] Issue is a race between device and netns dismantles. After calling __rtnl_unlock() from netdev_run_todo(), we can not assume the netns of each device is still alive. Make sure the device is not in NETREG_UNREGISTERED state, and add an ASSERT_RTNL() before the call to __dev_get_by_index(). We might move this ASSERT_RTNL() in __dev_get_by_index() in the future. [1] BUG: KASAN: slab-use-after-free in __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 Read of size 8 at addr ffff888043eba1b0 by task syz.0.0/5339 CPU: 0 UID: 0 PID: 5339 Comm: syz.0.0 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 default_operstate net/core/link_watch.c:51 [inline] rfc2863_policy+0x224/0x300 net/core/link_watch.c:67 linkwatch_do_dev+0x3e/0x170 net/core/link_watch.c:170 netdev_run_todo+0x461/0x1000 net/core/dev.c:10894 rtnl_unlock net/core/rtnetlink.c:152 [inline] rtnl_net_unlock include/linux/rtnetlink.h:133 [inline] rtnl_dellink+0x760/0x8d0 net/core/rtnetlink.c:3520 rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2a3cb80809 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2a3d9cd058 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2a3cd45fa0 RCX: 00007f2a3cb80809 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008 RBP: 00007f2a3cbf393e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f2a3cd45fa0 R15: 00007ffd03bc65c8 Allocated by task 5339: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kmalloc_array_noprof include/linux/slab.h:945 [inline] netdev_create_hash net/core/dev.c:11870 [inline] netdev_init+0x10c/0x250 net/core/dev.c:11890 ops_init+0x31e/0x590 net/core/net_namespace.c:138 setup_net+0x287/0x9e0 net/core/net_namespace.c:362 copy_net_ns+0x33f/0x570 net/core/net_namespace.c:500 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x57d/0xa70 kernel/fork.c:3314 __do_sys_unshare kernel/fork.c:3385 [inline] __se_sys_unshare kernel/fork.c:3383 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3383 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x8 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix LGR and link use-after-free issue We encountered a LGR/link use-after-free issue, which manifested as the LGR/link refcnt reaching 0 early and entering the clear process, making resource access unsafe. refcount_t: addition on 0; use-after-free. WARNING: CPU: 14 PID: 107447 at lib/refcount.c:25 refcount_warn_saturate+0x9c/0x140 Workqueue: events smc_lgr_terminate_work [smc] Call trace: refcount_warn_saturate+0x9c/0x140 __smc_lgr_terminate.part.45+0x2a8/0x370 [smc] smc_lgr_terminate_work+0x28/0x30 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 or refcount_t: underflow; use-after-free. WARNING: CPU: 6 PID: 93140 at lib/refcount.c:28 refcount_warn_saturate+0xf0/0x140 Workqueue: smc_hs_wq smc_listen_work [smc] Call trace: refcount_warn_saturate+0xf0/0x140 smcr_link_put+0x1cc/0x1d8 [smc] smc_conn_free+0x110/0x1b0 [smc] smc_conn_abort+0x50/0x60 [smc] smc_listen_find_device+0x75c/0x790 [smc] smc_listen_work+0x368/0x8a0 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 It is caused by repeated release of LGR/link refcnt. One suspect is that smc_conn_free() is called repeatedly because some smc_conn_free() from server listening path are not protected by sock lock. e.g. Calls under socklock | smc_listen_work ------------------------------------------------------- lock_sock(sk) | smc_conn_abort smc_conn_free | \- smc_conn_free \- smcr_link_put | \- smcr_link_put (duplicated) release_sock(sk) So here add sock lock protection in smc_listen_work() path, making it exclusive with other connection operations.

In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free of kernel socket in cleanup_bearer(). syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1] When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer(). tipc_exit_net() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free. Let's move the decrement after releasing the socket in cleanup_bearer(). [0]: ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0 __sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848 __tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898 ____sys_sendmsg+0x500/0x830 [1]: BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489 __sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer

In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid potential out-of-bound access in fill_frame_info() syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: net: enetc: Do not configure preemptible TCs if SIs do not support Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs() to configure preemptible TCs. However, only PF is able to configure preemptible TCs. Because only PF has related registers, while VF does not have these registers. So for VF, its hw->port pointer is NULL. Therefore, VF will access an invalid pointer when accessing a non-existent register, which will cause a crash issue. The simplified log is as follows. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Call trace: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ end trace 0000000000000000 ]--- In addition, some PFs also do not support configuring preemptible TCs, such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs, but we should prevent these PFs from accessing these unimplemented registers.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.

In the Linux kernel, the following vulnerability has been resolved: can: hi311x: hi3110_can_ist(): fix potential use-after-free The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off") removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off). The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused. Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting.

In the Linux kernel, the following vulnerability has been resolved: powerpc/prom_init: Fixup missing powermac #size-cells On some powermacs `escc` nodes are missing `#size-cells` properties, which is deprecated and now triggers a warning at boot since commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"). For example: Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000 WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108 Hardware name: PowerMac3,1 7400 0xc0209 PowerMac ... Call Trace: of_bus_n_size_cells+0x98/0x108 (unreliable) of_bus_default_count_cells+0x40/0x60 __of_get_address+0xc8/0x21c __of_address_to_resource+0x5c/0x228 pmz_init_port+0x5c/0x2ec pmz_probe.isra.0+0x144/0x1e4 pmz_console_init+0x10/0x48 console_init+0xcc/0x138 start_kernel+0x5c4/0x694 As powermacs boot via prom_init it's possible to add the missing properties to the device tree during boot, avoiding the warning. Note that `escc-legacy` nodes are also missing `#size-cells` properties, but they are skipped by the macio driver, so leave them alone. Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling")

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to restrict this maximum depth to a more reasonable value not to harm performance. Remove unnecessary WARN_ON_ONCE which is reachable from userspace.

In the Linux kernel, the following vulnerability has been resolved: MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a Fix the dtc warnings: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"): WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0 Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0 The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a"), which has fixed the issue for ls2k (despite its subject mentions ls7a).

In the Linux kernel, the following vulnerability has been resolved: bpf: put bpf_link's program when link is safe to be deallocated In general, BPF link's underlying BPF program should be considered to be reachable through attach hook -> link -> prog chain, and, pessimistically, we have to assume that as long as link's memory is not safe to free, attach hook's code might hold a pointer to BPF program and use it. As such, it's not (generally) correct to put link's program early before waiting for RCU GPs to go through. More eager bpf_prog_put() that we currently do is mostly correct due to BPF program's release code doing similar RCU GP waiting, but as will be shown in the following patches, BPF program can be non-sleepable (and, thus, reliant on only "classic" RCU GP), while BPF link's attach hook can have sleepable semantics and needs to be protected by RCU Tasks Trace, and for such cases BPF link has to go through RCU Tasks Trace + "classic" RCU GPs before being deallocated. And so, if we put BPF program early, we might free BPF program before we free BPF link, leading to use-after-free situation. So, this patch defers bpf_prog_put() until we are ready to perform bpf_link's deallocation. At worst, this delays BPF program freeing by one extra RCU GP, but that seems completely acceptable. Alternatively, we'd need more elaborate ways to determine BPF hook, BPF link, and BPF program lifetimes, and how they relate to each other, which seems like an unnecessary complication. Note, for most BPF links we still will perform eager bpf_prog_put() and link dealloc, so for those BPF links there are no observable changes whatsoever. Only BPF links that use deferred dealloc might notice slightly delayed freeing of BPF programs. Also, to reduce code and logic duplication, extract program put + link dealloc logic into bpf_link_dealloc() helper.

In the Linux kernel, the following vulnerability has been resolved: soc: imx8m: Probe the SoC driver as platform driver With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe. Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later. " ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace: imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1 "

In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case.