In certain highly specific configurations of the host system and MongoDB server binary installation on Linux Operating Systems, it may be possible for a unintended actor with host-level access to cause the MongoDB Server binary to load unintended actor-controlled shared libraries when the server binary is started, potentially resulting in the unintended actor gaining full control over the MongoDB server process. This issue affects MongoDB Server v5.0 versions prior to 5.0.14 and MongoDB Server v6.0 versions prior to 6.0.3. Required Configuration: Only environments with Linux as the underlying operating system is affected by this issue

MongoDB Server may access non-initialized region of memory leading to unexpected behaviour when zero arguments are called in internal aggregation stage. This issue affected MongoDB Server v6.0 version 6.0.3.

Уязвимость функции xe_exec_queue_put компонента DRM ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции gtp_dev_xmit() модуля drivers/net/gtp.c ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функций select_local_address() и select_signal_address компонента mptcp ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции dequeue_rx() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_xmit() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции v3d_csd_job_run() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_finish_output2 ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции cifs_free_subrequest() клиента SMB ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на доступность защищаемой информации

In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function.

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix shift-out-of-bounds in dbDiscardAG When searching for the next smaller log2 block, BLKSTOL2() returned 0, causing shift exponent -1 to be negative. This patch fixes the issue by exiting the loop directly when negative shift is found.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix null ptr deref in dtInsertEntry [syzbot reported] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713 ... [Analyze] In dtInsertEntry(), when the pointer h has the same value as p, after writing name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the previously true judgment "p->header.flag & BT-LEAF" to change to no after writing the name operation, this leads to entering an incorrect branch and accessing the uninitialized object ih when judging this condition for the second time. [Fix] After got the page, check freelist first, if freelist == 0 then exit dtInsert() and return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: fou: remove warn in gue_gro_receive on unsupported protocol Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks").

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to cover read extent cache access with lock syzbot reports a f2fs bug as below: BUG: KASAN: slab-use-after-free in sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46 Read of size 4 at addr ffff8880739ab220 by task syz-executor200/5097 CPU: 0 PID: 5097 Comm: syz-executor200 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46 do_read_inode fs/f2fs/inode.c:509 [inline] f2fs_iget+0x33e1/0x46e0 fs/f2fs/inode.c:560 f2fs_nfs_get_inode+0x74/0x100 fs/f2fs/super.c:3237 generic_fh_to_dentry+0x9f/0xf0 fs/libfs.c:1413 exportfs_decode_fh_raw+0x152/0x5f0 fs/exportfs/expfs.c:444 exportfs_decode_fh+0x3c/0x80 fs/exportfs/expfs.c:584 do_handle_to_path fs/fhandle.c:155 [inline] handle_to_path fs/fhandle.c:210 [inline] do_handle_open+0x495/0x650 fs/fhandle.c:226 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f We missed to cover sanity_check_extent_cache() w/ extent cache lock, so, below race case may happen, result in use after free issue. - f2fs_iget - do_read_inode - f2fs_init_read_extent_tree : add largest extent entry in to cache - shrink - f2fs_shrink_read_extent_tree - __shrink_extent_tree - __detach_extent_node : drop largest extent entry - sanity_check_extent_cache : access et->largest w/o lock let's refactor sanity_check_extent_cache() to avoid extent cache access and call it before f2fs_init_read_extent_tree() to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inline.c:258! CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0 RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258 Call Trace: f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315 do_writepages+0x35b/0x870 mm/page-writeback.c:2612 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117 wb_do_writeback fs/fs-writeback.c:2264 [inline] wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f2/0x390 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The root cause is: inline_data inode can be fuzzed, so that there may be valid blkaddr in its direct node, once f2fs triggers background GC to migrate the block, it will hit f2fs_bug_on() during dirty page writeback. Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC, so that, it can forbid migrating inline_data inode's data block for fixing.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink: Initialise extack before use in ACKs Add missing extack initialisation when ACKing BATCH_BEGIN and BATCH_END.

In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: avoid possible UaF when selecting endp select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Free job before xe_exec_queue_put Free job depends on job->vm being valid, the last xe_exec_queue_put can destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put. (cherry picked from commit 32a42c93b74c8ca6d0915ea3eba21bceff53042f)

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask() UBSAN reports the following 'subtraction overflow' error when booting in a virtual machine on Android: | Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4 | Hardware name: linux,dummy-virt (DT) | pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cancel_delayed_work+0x34/0x44 | lr : cancel_delayed_work+0x2c/0x44 | sp : ffff80008002ba60 | x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0 | x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058 | x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d | x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000 | x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000 | x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553 | x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620 | x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | cancel_delayed_work+0x34/0x44 | deferred_probe_extend_timeout+0x20/0x70 | driver_register+0xa8/0x110 | __platform_driver_register+0x28/0x3c | syscon_init+0x24/0x38 | do_one_initcall+0xe4/0x338 | do_initcall_level+0xac/0x178 | do_initcalls+0x5c/0xa0 | do_basic_setup+0x20/0x30 | kernel_init_freeable+0x8c/0xf8 | kernel_init+0x28/0x1b4 | ret_from_fork+0x10/0x20 | Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception This is due to shift_and_mask() using a signed immediate to construct the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so that it ends up decrementing from INT_MIN. Use an unsigned constant '1U' to generate the mask in shift_and_mask().

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate vlan header Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline]

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UAF in ip6_xmit() If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in ip6_finish_output2() If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent UAF in ip6_send_skb() syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80

In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer.

In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid possible NULL dereference in cifs_free_subrequest() Clang static checker (scan-build) warning: cifsglob.h:line 890, column 3 Access to field 'ops' results in a dereference of a null pointer. Commit 519be989717c ("cifs: Add a tracepoint to track credits involved in R/W requests") adds a check for 'rdata->server', and let clang throw this warning about NULL dereference. When 'rdata->credits.value != 0 && rdata->server == NULL' happens, add_credits_and_wake_if() will call rdata->server->ops->add_credits(). This will cause NULL dereference problem. Add a check for 'rdata->server' to avoid NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()` When enabling UBSAN on Raspberry Pi 5, we get the following warning: [ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3 [ 387.903868] index 7 is out of range for type '__u32 [7]' [ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151 [ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched] [ 387.932525] Call trace: [ 387.935296] dump_backtrace+0x170/0x1b8 [ 387.939403] show_stack+0x20/0x38 [ 387.942907] dump_stack_lvl+0x90/0xd0 [ 387.946785] dump_stack+0x18/0x28 [ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0 [ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d] [ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ 387.966862] process_one_work+0x62c/0xb48 [ 387.971296] worker_thread+0x468/0x5b0 [ 387.975317] kthread+0x1c4/0x1e0 [ 387.978818] ret_from_fork+0x10/0x20 [ 387.983014] ---[ end trace ]--- This happens because the UAPI provides only seven configuration registers and we are reading the eighth position of this u32 array. Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by accessing only seven positions on the '__u32 [7]' array. The eighth register exists indeed on V3D 7.1, but it isn't currently used. That being so, let's guarantee that it remains unused and add a note that it could be set in a future patch.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start ¦ ? ...... setup tc ¦ ¦ ? ? DOWN: napi_disable() napi_disable()(skip) ¦ ¦ ¦ ? ? ...... ...... ¦ ¦ ? ¦ napi_enable() ¦ ? UINIT: netif_napi_del() ¦ ? ...... ¦ ? INIT: netif_napi_add() ¦ ? ...... global reset start ¦ ¦ ? ? UP: napi_enable()(skip) ...... ¦ ¦ ? ? ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it.

In the Linux kernel, the following vulnerability has been resolved: vsock: fix recursive ->recvmsg calls After a vsock socket has been added to a BPF sockmap, its prot->recvmsg has been replaced with vsock_bpf_recvmsg(). Thus the following recursiion could happen: vsock_bpf_recvmsg() -> __vsock_recvmsg() -> vsock_connectible_recvmsg() -> prot->recvmsg() -> vsock_bpf_recvmsg() again We need to fix it by calling the original ->recvmsg() without any BPF sockmap logic in __vsock_recvmsg().

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_wed: fix use-after-free panic in mtk_wed_setup_tc_block_cb() When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... ---------

In the Linux kernel, the following vulnerability has been resolved: atm: idt77252: prevent use after free in dequeue_rx() We can't dereference "skb" after calling vcc->push() because the skb is released.

In the Linux kernel, the following vulnerability has been resolved: gtp: pull network headers in gtp_dev_xmit() syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.

In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only decrement add_addr_accepted for MPJ req Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before.

In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Check USB endpoints when probing device Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints.

In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: use dma non-coherent allocator Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists.

In the Linux kernel, the following vulnerability has been resolved: nvme: move stopping keep-alive into nvme_uninit_ctrl() Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup") moves starting keep-alive from nvme_start_ctrl() into nvme_init_ctrl_finish(), but don't move stopping keep-alive into nvme_uninit_ctrl(), so keep-alive work can be started and keep pending after failing to start controller, finally use-after-free is triggered if nvme host driver is unloaded. This patch fixes kernel panic when running nvme/004 in case that connection failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl(). This way is reasonable because keep-alive is now started in nvme_init_ctrl_finish().

In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid possible physmem_info segment corruption When physical memory for the kernel image is allocated it does not consider extra memory required for offsetting the image start to match it with the lower 20 bits of KASLR virtual base address. That might lead to kernel access beyond its memory range.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/

In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix IPsec RoCE MPV trace call Prevent the call trace below from happening, by not allowing IPsec creation over a slave, if master device doesn't support IPsec. WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94 Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci] CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2 Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021 Workqueue: events xfrm_state_gc_task RIP: 0010:down_read+0x75/0x94 Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0 RSP: 0018:ffffb26387773da8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000 RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540 R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905 FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0 Call Trace: ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] ? down_read+0x75/0x94 ? __warn+0x80/0x113 ? down_read+0x75/0x94 ? report_bug+0xa4/0x11d ? handle_bug+0x35/0x8b ? exc_invalid_op+0x14/0x75 ? asm_exc_invalid_op+0x16/0x1b ? down_read+0x75/0x94 ? down_read+0xe/0x94 mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core] tx_destroy+0x1b/0xc0 [mlx5_core] tx_ft_put+0x53/0xc0 [mlx5_core] mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core] ___xfrm_state_destroy+0x10f/0x1a2 xfrm_state_gc_task+0x81/0xa9 process_one_work+0x1f1/0x3c6 worker_thread+0x53/0x3e4 ? process_one_work.cold+0x46/0x3c kthread+0x127/0x144 ? set_kthread_struct+0x60/0x52 ret_from_fork+0x22/0x2d ---[ end trace 5ef7896144d398e1 ]---

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: initialise extack before use Fix missing initialisation of extack in flow offload.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Take state lock during tx timeout reporter mlx5e_safe_reopen_channels() requires the state lock taken. The referenced changed in the Fixes tag removed the lock to fix another issue. This patch adds it back but at a later point (when calling mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the Fixes tag.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a kernel verifier crash in stacksafe() Daniel Hodges reported a kernel verifier crash when playing with sched-ext. Further investigation shows that the crash is due to invalid memory access in stacksafe(). More specifically, it is the following code: if (exact != NOT_EXACT && old->stack[spi].slot_type[i % BPF_REG_SIZE] != cur->stack[spi].slot_type[i % BPF_REG_SIZE]) return false; The 'i' iterates old->allocated_stack. If cur->allocated_stack < old->allocated_stack the out-of-bound access will happen. To fix the issue add 'i >= cur->allocated_stack' check such that if the condition is true, stacksafe() should fail. Otherwise, cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal.

In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane).

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0 The __vmap_pages_range_noflush() assumes its argument pages** contains pages with the same page shift. However, since commit e9c3cda4d86e ("mm, vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes __GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation failed for high order, the pages** may contain two different page shifts (high order and order-0). This could lead __vmap_pages_range_noflush() to perform incorrect mappings, potentially resulting in memory corruption. Users might encounter this as follows (vmap_allow_huge = true, 2M is for PMD_SIZE): kvmalloc(2M, __GFP_NOFAIL|GFP_X) __vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP) vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0 vmap_pages_range() vmap_pages_range_noflush() __vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens We can remove the fallback code because if a high-order allocation fails, __vmalloc_node_range_noprof() will retry with order-0. Therefore, it is unnecessary to fallback to order-0 here. Therefore, fix this by removing the fallback code.

In the Linux kernel, the following vulnerability has been resolved: md/raid1: Fix data corruption for degraded array with slow disk read_balance() will avoid reading from slow disks as much as possible, however, if valid data only lands in slow disks, and a new normal disk is still in recovery, unrecovered data can be read: raid1_read_request read_balance raid1_should_read_first -> return false choose_best_rdev -> normal disk is not recovered, return -1 choose_bb_rdev -> missing the checking of recovery, return the normal disk -> read unrecovered data Root cause is that the checking of recovery is missing in choose_bb_rdev(). Hence add such checking to fix the problem. Also fix similar problem in choose_slow_rdev().

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb vs. core-mm PT locking We recently made GUP's common page table walking code to also walk hugetlb VMAs without most hugetlb special-casing, preparing for the future of having less hugetlb-specific page table walking code in the codebase. Turns out that we missed one page table locking detail: page table locking for hugetlb folios that are not mapped using a single PMD/PUD. Assume we have hugetlb folio that spans multiple PTEs (e.g., 64 KiB hugetlb folios on arm64 with 4 KiB base page size). GUP, as it walks the page tables, will perform a pte_offset_map_lock() to grab the PTE table lock. However, hugetlb that concurrently modifies these page tables would actually grab the mm->page_table_lock: with USE_SPLIT_PTE_PTLOCKS, the locks would differ. Something similar can happen right now with hugetlb folios that span multiple PMDs when USE_SPLIT_PMD_PTLOCKS. This issue can be reproduced [1], for example triggering: [ 3105.936100] ------------[ cut here ]------------ [ 3105.939323] WARNING: CPU: 31 PID: 2732 at mm/gup.c:142 try_grab_folio+0x11c/0x188 [ 3105.944634] Modules linked in: [...] [ 3105.974841] CPU: 31 PID: 2732 Comm: reproducer Not tainted 6.10.0-64.eln141.aarch64 #1 [ 3105.980406] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-4.fc40 05/24/2024 [ 3105.986185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3105.991108] pc : try_grab_folio+0x11c/0x188 [ 3105.994013] lr : follow_page_pte+0xd8/0x430 [ 3105.996986] sp : ffff80008eafb8f0 [ 3105.999346] x29: ffff80008eafb900 x28: ffffffe8d481f380 x27: 00f80001207cff43 [ 3106.004414] x26: 0000000000000001 x25: 0000000000000000 x24: ffff80008eafba48 [ 3106.009520] x23: 0000ffff9372f000 x22: ffff7a54459e2000 x21: ffff7a546c1aa978 [ 3106.014529] x20: ffffffe8d481f3c0 x19: 0000000000610041 x18: 0000000000000001 [ 3106.019506] x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000000 [ 3106.024494] x14: ffffb85477fdfe08 x13: 0000ffff9372ffff x12: 0000000000000000 [ 3106.029469] x11: 1fffef4a88a96be1 x10: ffff7a54454b5f0c x9 : ffffb854771b12f0 [ 3106.034324] x8 : 0008000000000000 x7 : ffff7a546c1aa980 x6 : 0008000000000080 [ 3106.038902] x5 : 00000000001207cf x4 : 0000ffff9372f000 x3 : ffffffe8d481f000 [ 3106.043420] x2 : 0000000000610041 x1 : 0000000000000001 x0 : 0000000000000000 [ 3106.047957] Call trace: [ 3106.049522] try_grab_folio+0x11c/0x188 [ 3106.051996] follow_pmd_mask.constprop.0.isra.0+0x150/0x2e0 [ 3106.055527] follow_page_mask+0x1a0/0x2b8 [ 3106.058118] __get_user_pages+0xf0/0x348 [ 3106.060647] faultin_page_range+0xb0/0x360 [ 3106.063651] do_madvise+0x340/0x598 Let's make huge_pte_lockptr() effectively use the same PT locks as any core-mm page table walker would. Add ptep_lockptr() to obtain the PTE page table lock using a pte pointer -- unfortunately we cannot convert pte_lockptr() because virt_to_page() doesn't work with kmap'ed page tables we can have with CONFIG_HIGHPTE. Handle CONFIG_PGTABLE_LEVELS correctly by checking in reverse order, such that when e.g., CONFIG_PGTABLE_LEVELS==2 with PGDIR_SIZE==P4D_SIZE==PUD_SIZE==PMD_SIZE will work as expected. Document why that works. There is one ugly case: powerpc 8xx, whereby we have an 8 MiB hugetlb folio being mapped using two PTE page tables. While hugetlb wants to take the PMD table lock, core-mm would grab the PTE table lock of one of both PTE page tables. In such corner cases, we have to make sure that both locks match, which is (fortunately!) currently guaranteed for 8xx as it does not support SMP and consequently doesn't use split PT locks. [1] https://lore.kernel.org/all/1bbfcc7f-f222-45a5-ac44-c5a1381c596d@redhat.com/

In the Linux kernel, the following vulnerability has been resolved: fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup() If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop up the damage. If it fails early enough, before xhci->interrupters is allocated but after xhci->max_interrupters has been set, which happens in most (all?) cases, things get uglier, as xhci_mem_cleanup() unconditionally derefences xhci->interrupters. With prejudice. Gate the interrupt freeing loop with a check on xhci->interrupters being non-NULL. Found while debugging a DMA allocation issue that led the XHCI driver on this exact path.

In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_test: Fix NULL dereference on allocation failure If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success.

In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: Do not mark ACPI devices as irq safe On ACPI machines, the tegra i2c module encounters an issue due to a mutex being called inside a spinlock. This leads to the following bug: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 ... Call trace: __might_sleep __mutex_lock_common mutex_lock_nested acpi_subsys_runtime_resume rpm_resume tegra_i2c_xfer The problem arises because during __pm_runtime_resume(), the spinlock &dev->power.lock is acquired before rpm_resume() is called. Later, rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on mutexes, triggering the error. To address this issue, devices on ACPI are now marked as not IRQ-safe, considering the dependency of acpi_subsys_runtime_resume() on mutexes.

In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID.

In the Linux kernel, the following vulnerability has been resolved: scsi: aacraid: Fix double-free on probe failure aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: st: fix probed platform device ref count on probe error path The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Prevent USB core invalid event buffer address access This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Add poll mod list filling check In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: gtp: fix a potential NULL pointer dereference When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.)

In the Linux kernel, the following vulnerability has been resolved: bonding: change ipsec_lock from spin lock to mutex In the cited commit, bond->ipsec_lock is added to protect ipsec_list, hence xdo_dev_state_add and xdo_dev_state_delete are called inside this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep, "scheduling while atomic" will be triggered when changing bond's active slave. [ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200 [ 101.055726] Modules linked in: [ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1 [ 101.058760] Hardware name: [ 101.059434] Call Trace: [ 101.059436] [ 101.060873] dump_stack_lvl+0x51/0x60 [ 101.061275] __schedule_bug+0x4e/0x60 [ 101.061682] __schedule+0x612/0x7c0 [ 101.062078] ? __mod_timer+0x25c/0x370 [ 101.062486] schedule+0x25/0xd0 [ 101.062845] schedule_timeout+0x77/0xf0 [ 101.063265] ? asm_common_interrupt+0x22/0x40 [ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10 [ 101.064215] __wait_for_common+0x87/0x190 [ 101.064648] ? usleep_range_state+0x90/0x90 [ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core] [ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core] [ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core] [ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core] [ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.067738] ? kmalloc_trace+0x4d/0x350 [ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core] [ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core] [ 101.069312] bond_change_active_slave+0x392/0x900 [bonding] [ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding] [ 101.070454] __bond_opt_set+0xa6/0x430 [bonding] [ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding] [ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding] [ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0 [ 101.073033] vfs_write+0x2d8/0x400 [ 101.073416] ? alloc_fd+0x48/0x180 [ 101.073798] ksys_write+0x5f/0xe0 [ 101.074175] do_syscall_64+0x52/0x110 [ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53 As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called from bond_change_active_slave, which requires holding the RTNL lock. And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user context. So ipsec_lock doesn't have to be spin lock, change it to mutex, and thus the above issue can be resolved.

In the Linux kernel, the following vulnerability has been resolved: ethtool: check device is present when getting link settings A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd7fb65 ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix random crash seen while removing driver This fixes the random kernel crash seen while removing the driver, when running the load/unload test over multiple iterations. 1) modprobe btnxpuart 2) hciconfig hci0 reset 3) hciconfig (check hci0 interface up with valid BD address) 4) modprobe -r btnxpuart Repeat steps 1 to 4 The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(), which gets scheduled after module is removed, causing a kernel crash. This hidden issue got highlighted after enabling Power Save by default in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on startup) The new ps_cleanup() deasserts UART break immediately while closing serdev device, cancels any scheduled ps_work and destroys the ps_lock mutex. [ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258 [ 85.884624] Mem abort info: [ 85.884625] ESR = 0x0000000086000007 [ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits [ 85.884633] SET = 0, FnV = 0 [ 85.884636] EA = 0, S1PTW = 0 [ 85.884638] FSC = 0x07: level 3 translation fault [ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000 [ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000 [ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP [ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)] [ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1 [ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT) [ 85.936182] Workqueue: events 0xffffd4a61638f380 [ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 85.952817] pc : 0xffffd4a61638f258 [ 85.952823] lr : 0xffffd4a61638f258 [ 85.952827] sp : ffff8000084fbd70 [ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000 [ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305 [ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970 [ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000 [ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090 [ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139 [ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50 [ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8 [ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000 [ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000 [ 85.977443] Call trace: [ 85.977446] 0xffffd4a61638f258 [ 85.977451] 0xffffd4a61638f3e8 [ 85.977455] process_one_work+0x1d4/0x330 [ 85.977464] worker_thread+0x6c/0x430 [ 85.977471] kthread+0x108/0x10c [ 85.977476] ret_from_fork+0x10/0x20 [ 85.977488] Code: bad PC value [ 85.977491] ---[ end trace 0000000000000000 ]--- Preset since v6.9.11

In the Linux kernel, the following vulnerability has been resolved: pktgen: use cpus_read_lock() in pg_net_init() I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood.

In the Linux kernel, the following vulnerability has been resolved: nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of sc_type") states_show() relied on sc_type field to be of valid type before calling into a subfunction to show content of a particular stateid. From that commit, we split the validity of the stateid into sc_status and no longer changed sc_type to 0 while unhashing the stateid. This resulted in kernel oopsing for nfsv4.0 opens that stay around and in nfs4_show_open() would derefence sc_file which was NULL. Instead, for closed open stateids forgo displaying information that relies of having a valid sc_file. To reproduce: mount the server with 4.0, read and close a file and then on the server cat /proc/fs/nfsd/clients/2/states [ 513.590804] Call trace: [ 513.590925] _raw_spin_lock+0xcc/0x160 [ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd] [ 513.591412] states_show+0x44c/0x488 [nfsd] [ 513.591681] seq_read_iter+0x5d8/0x760 [ 513.591896] seq_read+0x188/0x208 [ 513.592075] vfs_read+0x148/0x470 [ 513.592241] ksys_read+0xcc/0x178

In the Linux kernel, the following vulnerability has been resolved: drm/xe: prevent UAF around preempt fence The fence lock is part of the queue, therefore in the current design anything locking the fence should then also hold a ref to the queue to prevent the queue from being freed. However, currently it looks like we signal the fence and then drop the queue ref, but if something is waiting on the fence, the waiter is kicked to wake up at some later point, where upon waking up it first grabs the lock before checking the fence state. But if we have already dropped the queue ref, then the lock might already be freed as part of the queue, leading to uaf. To prevent this, move the fence lock into the fence itself so we don't run into lifetime issues. Alternative might be to have device level lock, or only release the queue in the fence release callback, however that might require pushing to another worker to avoid locking issues. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2454 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2342 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2020 (cherry picked from commit 7116c35aacedc38be6d15bd21b2fc936eed0008b)

In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined create_elf_fdpic_tables() does not correctly account the space for the AUX vector when an architecture has ELF_HWCAP2 defined. Prior to the commit 10e29251be0e ("binfmt_elf_fdpic: fix /proc//auxv") it resulted in the last entry of the AUX vector being set to zero, but with that change it results in a kernel BUG. Fix that by adding one to the number of AUXV entries (nitems) when ELF_HWCAP2 is defined.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference in pcs_get_function() pinmux_generic_get_function() can return NULL and the pointer 'function' was dereferenced without checking against NULL. Add checking of pointer 'function' in pcs_get_function(). Found by code review.

In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid dereferencing rdata=NULL in smb2_new_read_req() This happens when called from SMB2_read() while using rdma and reaching the rdma_readwrite_threshold.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a use-after-free when hitting errors inside btrfs_submit_chunk() [BUG] There is an internal report that KASAN is reporting use-after-free, with the following backtrace: BUG: KASAN: slab-use-after-free in btrfs_check_read_bio+0xa68/0xb70 [btrfs] Read of size 4 at addr ffff8881117cec28 by task kworker/u16:2/45 CPU: 1 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.11.0-rc2-next-20240805-default+ #76 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x5e/0x2f0 print_report+0x118/0x216 kasan_report+0x11d/0x1f0 btrfs_check_read_bio+0xa68/0xb70 [btrfs] process_one_work+0xce0/0x12a0 worker_thread+0x717/0x1250 kthread+0x2e3/0x3c0 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 Allocated by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x7d/0x80 kmem_cache_alloc_noprof+0x16e/0x3e0 mempool_alloc_noprof+0x12e/0x310 bio_alloc_bioset+0x3f0/0x7a0 btrfs_bio_alloc+0x2e/0x50 [btrfs] submit_extent_page+0x4d1/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x4b/0x60 kmem_cache_free+0x214/0x5d0 bio_free+0xed/0x180 end_bbio_data_read+0x1cc/0x580 [btrfs] btrfs_submit_chunk+0x98d/0x1880 [btrfs] btrfs_submit_bio+0x33/0x70 [btrfs] submit_one_bio+0xd4/0x130 [btrfs] submit_extent_page+0x3ea/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [CAUSE] Although I cannot reproduce the error, the report itself is good enough to pin down the cause. The call trace is the regular endio workqueue context, but the free-by-task trace is showing that during btrfs_submit_chunk() we already hit a critical error, and is calling btrfs_bio_end_io() to error out. And the original endio function called bio_put() to free the whole bio. This means a double freeing thus causing use-after-free, e.g.: 1. Enter btrfs_submit_bio() with a read bio The read bio length is 128K, crossing two 64K stripes. 2. The first run of btrfs_submit_chunk() 2.1 Call btrfs_map_block(), which returns 64K 2.2 Call btrfs_split_bio() Now there are two bios, one referring to the first 64K, the other referring to the second 64K. 2.3 The first half is submitted. 3. The second run of btrfs_submit_chunk() 3.1 Call btrfs_map_block(), which by somehow failed Now we call btrfs_bio_end_io() to handle the error 3.2 btrfs_bio_end_io() calls the original endio function Which is end_bbio_data_read(), and it calls bio_put() for the original bio. Now the original bio is freed. 4. The submitted first 64K bio finished Now we call into btrfs_check_read_bio() and tries to advance the bio iter. But since the original bio (thus its iter) is already freed, we trigger the above use-after free. And even if the memory is not poisoned/corrupted, we will later call the original endio function, causing a double freeing. [FIX] Instead of calling btrfs_bio_end_io(), call btrfs_orig_bbio_end_io(), which has the extra check on split bios and do the pr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease It is not safe to dereference fl->c.flc_owner without first confirming fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict() tests fl_lmops but largely ignores the result and assumes that flc_owner is an nfs4_delegation anyway. This is wrong. With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave as it did before the change mentioned below. This is the same as the current code, but without any reference to a possible delegation.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Move unregister out of atomic section Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")' moved the pmic_glink client list under a spinlock, as it is accessed by the rpmsg/glink callback, which in turn is invoked from IRQ context. This means that ucsi_unregister() is now called from atomic context, which isn't feasible as it's expecting a sleepable context. An effort is under way to get GLINK to invoke its callbacks in a sleepable context, but until then lets schedule the unregistration. A side effect of this is that ucsi_unregister() can now happen after the remote processor, and thereby the communication link with it, is gone. pmic_glink_send() is amended with a check to avoid the resulting NULL pointer dereference. This does however result in the user being informed about this error by the following entry in the kernel log: ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Mark get_wq_ctx() as atomic call Currently get_wq_ctx() is wrongly configured as a standard call. When two SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to resume the corresponding sleeping thread. But if get_wq_ctx() is interrupted, goes to sleep and another SMC call is waiting to be allocated a waitq context, it leads to a deadlock. To avoid this get_wq_ctx() must be an atomic call and can't be a standard SMC call. Hence mark get_wq_ctx() as a fast call.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink: Fix race during initialization As pointed out by Stephen Boyd it is possible that during initialization of the pmic_glink child drivers, the protection-domain notifiers fires, and the associated work is scheduled, before the client registration returns and as a result the local "client" pointer has been initialized. The outcome of this is a NULL pointer dereference as the "client" pointer is blindly dereferenced. Timeline provided by Stephen: CPU0 CPU1 ---- ---- ucsi->client = NULL; devm_pmic_glink_register_client() client->pdr_notify(client->priv, pg->client_state) pmic_glink_ucsi_pdr_notify() schedule_work(&ucsi->register_work) pmic_glink_ucsi_register() ucsi_register() pmic_glink_ucsi_read_version() pmic_glink_ucsi_read() pmic_glink_ucsi_read() pmic_glink_send(ucsi->client) ucsi->client = client // Too late! This code is identical across the altmode, battery manager and usci child drivers. Resolve this by splitting the allocation of the "client" object and the registration thereof into two operations. This only happens if the protection domain registry is populated at the time of registration, which by the introduction of commit '1ebcde047c54 ("soc: qcom: add pd-mapper implementation")' became much more likely.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid using null object of framebuffer Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. (cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3)

In the Linux kernel, the following vulnerability has been resolved: selinux,smack: don't bypass permissions check in inode_setsecctx hook Marek Gresko reports that the root user on an NFS client is able to change the security labels on files on an NFS filesystem that is exported with root squashing enabled. The end of the kerneldoc comment for __vfs_setxattr_noperm() states: * This function requires the caller to lock the inode's i_mutex before it * is executed. It also assumes that the caller will make the appropriate * permission checks. nfsd_setattr() does do permissions checking via fh_verify() and nfsd_permission(), but those don't do all the same permissions checks that are done by security_inode_setxattr() and its related LSM hooks do. Since nfsd_setattr() is the only consumer of security_inode_setsecctx(), simplest solution appears to be to replace the call to __vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This fixes the above issue and has the added benefit of causing nfsd to recall conflicting delegations on a file when a client tries to change its security label.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix potential UAF in nfsd4_cb_getattr_release Once we drop the delegation reference, the fields embedded in it are no longer safe to access. Do that last.

In the Linux kernel, the following vulnerability has been resolved: nfsd: ensure that nfsd4_fattr_args.context is zeroed out If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to checking for the security label, then args.context will be set to uninitialized junk on the stack, which we'll then try to free. Initialize it early.

In the Linux kernel, the following vulnerability has been resolved: video/aperture: optionally match the device in sysfb_disable() In aperture_remove_conflicting_pci_devices(), we currently only call sysfb_disable() on vga class devices. This leads to the following problem when the pimary device is not VGA compatible: 1. A PCI device with a non-VGA class is the boot display 2. That device is probed first and it is not a VGA device so sysfb_disable() is not called, but the device resources are freed by aperture_detach_platform_device() 3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable() 4. NULL pointer dereference via sysfb_disable() since the resources have already been freed by aperture_detach_platform_device() when it was called by the other device. Fix this by passing a device pointer to sysfb_disable() and checking the device to determine if we should execute it or not. v2: Fix build when CONFIG_SCREEN_INFO is not set v3: Move device check into the mutex Drop primary variable in aperture_remove_conflicting_pci_devices() Drop __init on pci sysfb_pci_dev_is_enabled()

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Disable preemption while updating GPU stats We forgot to disable preemption around the write_seqcount_begin/end() pair while updating GPU stats: [ ] WARNING: CPU: 2 PID: 12 at include/linux/seqlock.h:221 __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched] <...snip...> [ ] Call trace: [ ] __seqprop_assert.isra.0+0x128/0x150 [v3d] [ ] v3d_job_start_stats.isra.0+0x90/0x218 [v3d] [ ] v3d_bin_job_run+0x23c/0x388 [v3d] [ ] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ ] process_one_work+0x62c/0xb48 [ ] worker_thread+0x468/0x5b0 [ ] kthread+0x1c4/0x1e0 [ ] ret_from_fork+0x10/0x20 Fix it.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix mes ring buffer overflow wait memory room until enough before writing mes packets to avoid ring buffer overflow. v2: squash in sched_hw_submission fix (cherry picked from commit 34e087e8920e635c62e2ed6a758b0cd27f836d13)

In the Linux kernel, the following vulnerability has been resolved: libfs: fix infinite directory reads for offset dir After we switch tmpfs dir operations from simple_dir_operations to simple_offset_dir_operations, every rename happened will fill new dentry to dest dir's maple tree(&SHMEM_I(inode)->dir_offsets->mt) with a free key starting with octx->newx_offset, and then set newx_offset equals to free key + 1. This will lead to infinite readdir combine with rename happened at the same time, which fail generic/736 in xfstests(detail show as below). 1. create 5000 files(1 2 3...) under one dir 2. call readdir(man 3 readdir) once, and get one entry 3. rename(entry, "TEMPFILE"), then rename("TEMPFILE", entry) 4. loop 2~3, until readdir return nothing or we loop too many times(tmpfs break test with the second condition) We choose the same logic what commit 9b378f6ad48cf ("btrfs: fix infinite directory reads") to fix it, record the last_index when we open dir, and do not emit the entry which index >= last_index. The file->private_data now used in offset dir can use directly to do this, and we also update the last_index when we llseek the dir file. [brauner: only update last_index after seek when offset is zero like Jan suggested]

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Mark XDomain as unplugged when router is removed I noticed that when we do discrete host router NVM upgrade and it gets hot-removed from the PCIe side as a result of NVM firmware authentication, if there is another host connected with enabled paths we hang in tearing them down. This is due to fact that the Thunderbolt networking driver also tries to cleanup the paths and ends up blocking in tb_disconnect_xdomain_paths() waiting for the domain lock. However, at this point we already cleaned the paths in tb_stop() so there is really no need for tb_disconnect_xdomain_paths() to do that anymore. Furthermore it already checks if the XDomain is unplugged and bails out early so take advantage of that and mark the XDomain as unplugged when we remove the parent router.

In the Linux kernel, the following vulnerability has been resolved: Revert "serial: 8250_omap: Set the console genpd always on if no console suspend" This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940. Kevin reported that this causes a crash during suspend on platforms that dont use PM domains.

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix spruious data race in __flush_work() When flushing a work item for cancellation, __flush_work() knows that it exclusively owns the work item through its PENDING bit. 134874e2eee9 ("workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items") added a read of @work->data to determine whether to use busy wait for BH work items that are being canceled. While the read is safe when @from_cancel, @work->data was read before testing @from_cancel to simplify code structure: data = *work_data_bits(work); if (from_cancel && !WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) { While the read data was never used if !@from_cancel, this could trigger KCSAN data race detection spuriously: ================================================================== BUG: KCSAN: data-race in __flush_work / __flush_work write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0: instrument_write include/linux/instrumented.h:41 [inline] ___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline] insert_wq_barrier kernel/workqueue.c:3790 [inline] start_flush_work kernel/workqueue.c:4142 [inline] __flush_work+0x30b/0x570 kernel/workqueue.c:4178 flush_work kernel/workqueue.c:4229 [inline] ... read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1: __flush_work+0x42a/0x570 kernel/workqueue.c:4188 flush_work kernel/workqueue.c:4229 [inline] flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251 ... value changed: 0x0000000000400000 -> 0xffff88810006c00d Reorganize the code so that @from_cancel is tested before @work->data is accessed. The only problem is triggering KCSAN detection spuriously. This shouldn't need READ_ONCE() or other access qualifiers. No functional changes.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: reset mmio mappings with devm Set our various mmio mappings to NULL. This should make it easier to catch something rogue trying to mess with mmio after device removal. For example, we might unmap everything and then start hitting some mmio address which has already been unmamped by us and then remapped by something else, causing all kinds of carnage.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: mark last busy before uart_add_one_port With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel sometimes boot hang. It is because normal console still is not ready, but runtime suspend is called, so early console putchar will hang in waiting TRDE set in UARTSTAT. The lpuart driver has auto suspend delay set to 3000ms, but during uart_add_one_port, a child device serial ctrl will added and probed with its pm runtime enabled(see serial_ctrl.c). The runtime suspend call path is: device_add |-> bus_probe_device |->device_initial_probe |->__device_attach |-> pm_runtime_get_sync(dev->parent); |-> pm_request_idle(dev); |-> pm_runtime_put(dev->parent); So in the end, before normal console ready, the lpuart get runtime suspended. And earlycon putchar will hang. To address the issue, mark last busy just after pm_runtime_enable, three seconds is long enough to switch from bootconsole to normal console.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: qcom: x1e80100: Fix special pin offsets Remove the erroneus 0x100000 offset to prevent the boards from crashing on pin state setting, as well as for the intended state changes to take effect.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix prime with external buffers Make sure that for external buffers mapping goes through the dma_buf interface instead of trying to access pages directly. External buffers might not provide direct access to readable/writable pages so to make sure the bo's created from external dma_bufs can be read dma_buf interface has to be used. Fixes crashes in IGT's kms_prime with vgem. Regular desktop usage won't trigger this due to the fact that virtual machines will not have multiple GPUs but it enables better test coverage in IGT.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Prevent unmapping active read buffers The kms paths keep a persistent map active to read and compare the cursor buffer. These maps can race with each other in simple scenario where: a) buffer "a" mapped for update b) buffer "a" mapped for compare c) do the compare d) unmap "a" for compare e) update the cursor f) unmap "a" for update At step "e" the buffer has been unmapped and the read contents is bogus. Prevent unmapping of active read buffers by simply keeping a count of how many paths have currently active maps and unmap only when the count reaches 0.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix ID 0 endp usage after multiple re-creations 'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Disable coherent dumb buffers without 3d Coherent surfaces make only sense if the host renders to them using accelerated apis. Without 3d the entire content of dumb buffers stays in the guest making all of the extra work they're doing to synchronize between guest and host useless. Configurations without 3d also tend to run with very low graphics memory limits. The pinned console fb, mob cursors and graphical login manager tend to run out of 16MB graphics memory that those guests use. Fix it by making sure the coherent dumb buffers are only used on configs with 3d enabled.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix null pointer dereference in trace ucsi_register_altmode checks IS_ERR for the alt pointer and treats NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled, ucsi_register_displayport returns NULL which causes a NULL pointer dereference in trace. Rather than return NULL, call typec_port_register_altmode to register DisplayPort alternate mode as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix dereference after null check check the pointer hive before use.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix possible NULL pointer dereference profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mc_data out-of-bounds read warning Clear warning that read mc_data[i-1] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ucode out-of-bounds read warning Clear warning that read ucode[] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds read of df_v1_7_channel_number Check the fb_channel_number range to avoid the array out-of-bounds read error

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix out-of-bounds write warning Check the ring type value to fix the out-of-bounds write warning

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Ensure index calculation will not overflow [WHY & HOW] Make sure vmid0p72_idx, vnom0p8_idx and vmax0p9_idx calculation will never overflow and exceess array size. This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery() When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference issue. Fix it by adding the check in ublk_ctrl_start_recovery() and return immediately in case of zero 'ub->nr_queues_ready'. BUG: kernel NULL pointer dereference, address: 0000000000000028 RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180 Call Trace: ? __die+0x20/0x70 ? page_fault_oops+0x75/0x170 ? exc_page_fault+0x64/0x140 ? asm_exc_page_fault+0x22/0x30 ? ublk_ctrl_start_recovery.constprop.0+0x82/0x180 ublk_ctrl_uring_cmd+0x4f7/0x6c0 ? pick_next_task_idle+0x26/0x40 io_uring_cmd+0x9a/0x1b0 io_issue_sqe+0x193/0x3f0 io_wq_submit_work+0x9b/0x390 io_worker_handle_work+0x165/0x360 io_wq_worker+0xcb/0x2f0 ? finish_task_switch.isra.0+0x203/0x290 ? finish_task_switch.isra.0+0x203/0x290 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix kernel crash if commands allocation fails If the commands allocation fails in nvmet_tcp_alloc_cmds() the kernel crashes in nvmet_tcp_release_queue_work() because of a NULL pointer dereference. nvmet: failed to install queue 0 cntlid 1 ret 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Fix the bug by setting queue->nr_cmds to zero in case nvmet_tcp_alloc_cmd() fails.

In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix use-after-free when removing resource in vmci_resource_remove() When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove().

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind For primary VM Bus channels, primary_channel pointer is always NULL. This pointer is valid only for the secondary channels. Also, rescind callback is meant for primary channels only. Fix NULL pointer dereference by retrieving the device_obj from the parent for the primary channel.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF caused by offsets overwrite Binder objects are processed and copied individually into the target buffer during transactions. Any raw data in-between these objects is copied as well. However, this raw data copy lacks an out-of-bounds check. If the raw data exceeds the data section size then the copy overwrites the offsets section. This eventually triggers an error that attempts to unwind the processed objects. However, at this point the offsets used to index these objects are now corrupted. Unwinding with corrupted offsets can result in decrements of arbitrary nodes and lead to their premature release. Other users of such nodes are left with a dangling pointer triggering a use-after-free. This issue is made evident by the following KASAN report (trimmed): ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff47fc91598f04 by task binder-util/743 CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_free_buf+0x128/0x434 binder_thread_write+0x8a4/0x3260 binder_ioctl+0x18f0/0x258c [...] Allocated by task 743: __kmalloc_cache_noprof+0x110/0x270 binder_new_node+0x50/0x700 binder_transaction+0x413c/0x6da8 binder_thread_write+0x978/0x3260 binder_ioctl+0x18f0/0x258c [...] Freed by task 745: kfree+0xbc/0x208 binder_thread_read+0x1c5c/0x37d4 binder_ioctl+0x16d8/0x258c [...] ================================================================== To avoid this issue, let's check that the raw data copy is within the boundaries of the data section.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix double free of 'buf' in error path smatch warning: drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf' In fastrpc_req_mmap() error path, the fastrpc buffer is freed in fastrpc_req_munmap_impl() if unmap is successful. But in the end, there is an unconditional call to fastrpc_buf_free(). So the above case triggers the double free of fastrpc buf.

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open() null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) and parse_lease_state() return NULL. Fix this by check if 'lease_ctx_info' is NULL. Additionally, remove the redundant parentheses in parse_durable_handle_context().

In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size.

In the Linux kernel, the following vulnerability has been resolved: HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush() This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]---

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adc128d818) Fix underflows seen when writing limit attributes DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: schedule rx work after everything is set up Right now it's possible to hit NULL pointer dereference in rtw_rx_fill_rx_status on hw object and/or its fields because initialization routine can start getting USB replies before rtw_dev is fully setup. The stack trace looks like this: rtw_rx_fill_rx_status rtw8821c_query_rx_desc rtw_usb_rx_handler ... queue_work rtw_usb_read_port_complete ... usb_submit_urb rtw_usb_rx_resubmit rtw_usb_init_rx rtw_usb_probe So while we do the async stuff rtw_usb_probe continues and calls rtw_register_hw, which does all kinds of initialization (e.g. via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on. Fix this by moving the first usb_submit_urb after everything is set up. For me, this bug manifested as: [ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped [ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status because I'm using Larry's backport of rtw88 driver with the NULL checks in rtw_rx_fill_rx_status.

In the Linux kernel, the following vulnerability has been resolved: pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel crash when we try to hot-unplug/disable the PCIe switch/bridge from the PHB. The crash occurs because although the MSI data structure has been released during disable/hot-unplug path and it has been assigned with NULL, still during unregistration the code was again trying to explicitly disable the MSI which causes the NULL pointer dereference and kernel crash. The patch fixes the check during unregistration path to prevent invoking pci_disable_msi/msix() since its data structure is already freed.

In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Fix possible access to a freed kirqfd instance Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd created and added to the irqfds_list by privcmd_irqfd_assign() may get removed by another thread executing privcmd_irqfd_deassign(), while the former is still using it after dropping the locks. This can lead to a situation where an already freed kirqfd instance may be accessed and cause kernel oops. Use SRCU locking to prevent the same, as is done for the KVM implementation for irqfds.

In the Linux kernel, the following vulnerability has been resolved: fou: Fix null-ptr-deref in GRO. We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ice: move netif_queue_set_napi to rtnl-protected sections Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154

In the Linux kernel, the following vulnerability has been resolved: ice: Add netif_device_attach/detach into PF reset flow Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net//device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator crb_pipes before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator pbn_div before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Free pvr_vm_gpuva after unlink This caused a measurable memory leak. Although the individual allocations are small, the leaks occurs in a high-usage codepath (remapping or unmapping device memory) so they add up quickly.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix missing cleanup on rollforward recovery error In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts.

In the Linux kernel, the following vulnerability has been resolved: ila: call nf_unregister_net_hooks() sooner syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_ini ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open The mcp251x_hw_wake() function is called with the mpc_lock mutex held and disables the interrupt handler so that no interrupts can be processed while waking the device. If an interrupt has already occurred then waiting for the interrupt handler to complete will deadlock because it will be trying to acquire the same mutex. CPU0 CPU1 ---- ---- mcp251x_open() mutex_lock(&priv->mcp_lock) request_threaded_irq() mcp251x_can_ist() mutex_lock(&priv->mcp_lock) mcp251x_hw_wake() disable_irq() <-- deadlock Use disable_irq_nosync() instead because the interrupt handler does everything while holding the mutex so it doesn't matter if it's still running.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards harder Since commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") dummy codecs declared like this: SND_SOC_DAILINK_DEF(dummy, DAILINK_COMP_ARRAY(COMP_DUMMY())); expand to: static struct snd_soc_dai_link_component dummy[] = { }; Which means that dummy is a zero sized array and thus dais[i].codecs should not be dereferenced *at all* since it points to the address of the next variable stored in the data section as the "dummy" variable has an address but no size, so even dereferencing dais[0] is already an out of bounds array reference. Which means that the if (dais[i].codecs->name) check added in commit 7d99a70b6595 ("ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards") relies on that the part of the next variable which the name member maps to just happens to be NULL. Which apparently so far it usually is, except when it isn't and then it results in crashes like this one: [ 28.795659] BUG: unable to handle page fault for address: 0000000000030011 ... [ 28.795780] Call Trace: [ 28.795787] ... [ 28.795862] ? strcmp+0x18/0x40 [ 28.795872] 0xffffffffc150c605 [ 28.795887] platform_probe+0x40/0xa0 ... [ 28.795979] ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102] Really fix things this time around by checking dais.num_codecs != 0.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset the binding mark of a reused connection Steve French reported null pointer dereference error from sha256 lib. cifs.ko can send session setup requests on reused connection. If reused connection is used for binding session, conn->binding can still remain true and generate_preauth_hash() will not set sess->Preauth_HashValue and it will be NULL. It is used as a material to create an encryption key in ksmbd_gen_smb311_encryptionkey. ->Preauth_HashValue cause null pointer dereference error from crypto_shash_update(). BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 8 PID: 429254 Comm: kworker/8:39 Hardware name: LENOVO 20MAS08500/20MAS08500, BIOS N2CET69W (1.52 ) Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] RIP: 0010:lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? do_user_addr_fault+0x2ee/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? lib_sha256_base_do_update.isra.0+0x11e/0x1d0 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] ? __pfx_sha256_transform_rorx+0x10/0x10 [sha256_ssse3] _sha256_update+0x77/0xa0 [sha256_ssse3] sha256_avx2_update+0x15/0x30 [sha256_ssse3] crypto_shash_update+0x1e/0x40 hmac_update+0x12/0x20 crypto_shash_update+0x1e/0x40 generate_key+0x234/0x380 [ksmbd] generate_smb3encryptionkey+0x40/0x1c0 [ksmbd] ksmbd_gen_smb311_encryptionkey+0x72/0xa0 [ksmbd] ntlm_authenticate.isra.0+0x423/0x5d0 [ksmbd] smb2_sess_setup+0x952/0xaa0 [ksmbd] __process_request+0xa3/0x1d0 [ksmbd] __handle_ksmbd_work+0x1c4/0x2f0 [ksmbd] handle_ksmbd_work+0x2d/0xa0 [ksmbd] process_one_work+0x16c/0x350 worker_thread+0x306/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xef/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x44/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double put of @cfile in smb2_set_path_size() If smb2_compound_op() is called with a valid @cfile and returned -EINVAL, we need to call cifs_get_writable_path() before retrying it as the reference of @cfile was already dropped by previous call. This fixes the following KASAN splat when running fstests generic/013 against Windows Server 2022: CIFS: Attempting to mount //w22-fs0/scratch run fstests generic/013 at 2024-09-02 19:48:59 ================================================================== BUG: KASAN: slab-use-after-free in detach_if_pending+0xab/0x200 Write of size 8 at addr ffff88811f1a3730 by task kworker/3:2/176 CPU: 3 UID: 0 PID: 176 Comm: kworker/3:2 Not tainted 6.11.0-rc6 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: cifsoplockd cifs_oplock_break [cifs] Call Trace: dump_stack_lvl+0x5d/0x80 ? detach_if_pending+0xab/0x200 print_report+0x156/0x4d9 ? detach_if_pending+0xab/0x200 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? detach_if_pending+0xab/0x200 kasan_report+0xda/0x110 ? detach_if_pending+0xab/0x200 detach_if_pending+0xab/0x200 timer_delete+0x96/0xe0 ? __pfx_timer_delete+0x10/0x10 ? rcu_is_watching+0x20/0x50 try_to_grab_pending+0x46/0x3b0 __cancel_work+0x89/0x1b0 ? __pfx___cancel_work+0x10/0x10 ? kasan_save_track+0x14/0x30 cifs_close_deferred_file+0x110/0x2c0 [cifs] ? __pfx_cifs_close_deferred_file+0x10/0x10 [cifs] ? __pfx_down_read+0x10/0x10 cifs_oplock_break+0x4c1/0xa50 [cifs] ? __pfx_cifs_oplock_break+0x10/0x10 [cifs] ? lock_is_held_type+0x85/0xf0 ? mark_held_locks+0x1a/0x90 process_one_work+0x4c6/0x9f0 ? find_held_lock+0x8a/0xa0 ? __pfx_process_one_work+0x10/0x10 ? lock_acquired+0x220/0x550 ? __list_add_valid_or_report+0x37/0x100 worker_thread+0x2e4/0x570 ? __kthread_parkme+0xd1/0xf0 ? __pfx_worker_thread+0x10/0x10 kthread+0x17f/0x1c0 ? kthread+0xda/0x1c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Allocated by task 1118: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 cifs_new_fileinfo+0xc8/0x9d0 [cifs] cifs_atomic_open+0x467/0x770 [cifs] lookup_open.isra.0+0x665/0x8b0 path_openat+0x4c3/0x1380 do_filp_open+0x167/0x270 do_sys_openat2+0x129/0x160 __x64_sys_creat+0xad/0xe0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 83: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 poison_slab_object+0xe9/0x160 __kasan_slab_free+0x32/0x50 kfree+0xf2/0x300 process_one_work+0x4c6/0x9f0 worker_thread+0x2e4/0x570 kthread+0x17f/0x1c0 ret_from_fork+0x31/0x60 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x30/0x50 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x29/0xe0 __queue_work+0x5ea/0x760 queue_work_on+0x6d/0x90 _cifsFileInfo_put+0x3f6/0x770 [cifs] smb2_compound_op+0x911/0x3940 [cifs] smb2_set_path_size+0x228/0x270 [cifs] cifs_set_file_size+0x197/0x460 [cifs] cifs_setattr+0xd9c/0x14b0 [cifs] notify_change+0x4e3/0x740 do_truncate+0xfa/0x180 vfs_truncate+0x195/0x200 __x64_sys_truncate+0x109/0x150 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: powerpc/qspinlock: Fix deadlock in MCS queue If an interrupt occurs in queued_spin_lock_slowpath() after we increment qnodesp->count and before node->lock is initialized, another CPU might see stale lock values in get_tail_qnode(). If the stale lock value happens to match the lock on that CPU, then we write to the "next" pointer of the wrong qnode. This causes a deadlock as the former CPU, once it becomes the head of the MCS queue, will spin indefinitely until it's "next" pointer is set by its successor in the queue. Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in occasional lockups similar to the following: $ stress-ng --all 128 --vm-bytes 80% --aggressive \ --maximize --oomable --verify --syslog \ --metrics --times --timeout 5m watchdog: CPU 15 Hard LOCKUP ...... NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 Call Trace: 0xc000002cfffa3bf0 (unreliable) _raw_spin_lock+0x6c/0x90 raw_spin_rq_lock_nested.part.135+0x4c/0xd0 sched_ttwu_pending+0x60/0x1f0 __flush_smp_call_function_queue+0x1dc/0x670 smp_ipi_demux_relaxed+0xa4/0x100 xive_muxed_ipi_action+0x20/0x40 __handle_irq_event_percpu+0x80/0x240 handle_irq_event_percpu+0x2c/0x80 handle_percpu_irq+0x84/0xd0 generic_handle_irq+0x54/0x80 __do_irq+0xac/0x210 __do_IRQ+0x74/0xd0 0x0 do_IRQ+0x8c/0x170 hardware_interrupt_common_virt+0x29c/0x2a0 --- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490 ...... NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 --- interrupt: 500 0xc0000029c1a41d00 (unreliable) _raw_spin_lock+0x6c/0x90 futex_wake+0x100/0x260 do_futex+0x21c/0x2a0 sys_futex+0x98/0x270 system_call_exception+0x14c/0x2f0 system_call_vectored_common+0x15c/0x2ec The following code flow illustrates how the deadlock occurs. For the sake of brevity, assume that both locks (A and B) are contended and we call the queued_spin_lock_slowpath() function. CPU0 CPU1 ---- ---- spin_lock_irqsave(A) | spin_unlock_irqrestore(A) | spin_lock(B) | | | ? | id = qnodesp->count++; | (Note that nodes[0].lock == A) | | | ? | Interrupt | (happens before "nodes[0].lock = B") | | | ? | spin_lock_irqsave(A) | | | ? | id = qnodesp->count++ | nodes[1].lock = A | | | ? | Tail of MCS queue | | spin_lock_irqsave(A) ? | Head of MCS queue ? | CPU0 is previous tail ? | Spin indefinitely ? (until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0) | ? prev == &qnodes[CPU0].nodes[0] (as qnodes ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object When using kernel with the following extra config, - CONFIG_KASAN=y - CONFIG_KASAN_GENERIC=y - CONFIG_KASAN_INLINE=y - CONFIG_KASAN_VMALLOC=y - CONFIG_FRAME_WARN=4096 kernel detects that snd_pcm_suspend_all() access a freed 'snd_soc_pcm_runtime' object when the system is suspended, which leads to a use-after-free bug: [ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270 [ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330 [ 52.047785] Call trace: [ 52.047787] dump_backtrace+0x0/0x3c0 [ 52.047794] show_stack+0x34/0x50 [ 52.047797] dump_stack_lvl+0x68/0x8c [ 52.047802] print_address_description.constprop.0+0x74/0x2c0 [ 52.047809] kasan_report+0x210/0x230 [ 52.047815] __asan_report_load1_noabort+0x3c/0x50 [ 52.047820] snd_pcm_suspend_all+0x1a8/0x270 [ 52.047824] snd_soc_suspend+0x19c/0x4e0 The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before making any access. So we need to always set 'substream->runtime' to NULL everytime we kfree() it.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix NULL dereference on XDP_TX If number of TX queues are set to 1 we get a NULL pointer dereference during XDP_TX. ~# ethtool -L eth0 tx 1 ~# ./xdp-trafficgen udp -A -a eth0 -t 2 Transmitting on eth0 (ifindex 2) [ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Fix this by using actual TX queues instead of max TX queues when picking the TX channel in am65_cpsw_ndo_xdp_xmit().

In the Linux kernel, the following vulnerability has been resolved: sch/netem: fix use after free in netem_dequeue If netem_dequeue() enqueues packet to inner qdisc and that qdisc returns __NET_XMIT_STOLEN. The packet is dropped but qdisc_tree_reduce_backlog() is not called to update the parent's q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue fails") Commands to trigger KASAN UaF: ip link add type dummy ip link set lo up ip link set dummy0 up tc qdisc add dev lo parent root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2: handle 3: drr tc filter add dev lo parent 3: basic classid 3:1 action mirred egress redirect dev dummy0 tc class add dev lo classid 3:1 drr ping -c1 -W0.01 localhost # Trigger bug tc class del dev lo classid 1:1 tc class add dev lo classid 1:1 drr ping -c1 -W0.01 localhost # UaF

In the Linux kernel, the following vulnerability has been resolved: libfs: fix get_stashed_dentry() get_stashed_dentry() tries to optimistically retrieve a stashed dentry from a provided location. It needs to ensure to hold rcu lock before it dereference the stashed location to prevent UAF issues. Use rcu_dereference() instead of READ_ONCE() it's effectively equivalent with some lockdep bells and whistles and it communicates clearly that this expects rcu protection.