Файловые конфликты при обновлении с p11 до Sisyphus

Уязвимость функции gtp_dev_xmit() модуля drivers/net/gtp.c ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функций select_local_address() и select_signal_address компонента mptcp ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции dequeue_rx() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_xmit() ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции v3d_csd_job_run() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ip6_finish_output2 ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции cifs_free_subrequest() клиента SMB ядра операционных систем Linux, позволяющая нарушителю оказать воздействие на доступность защищаемой информации

In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: fix memory leak for not ip packets Free the unused skb when not ip packets arrive.

In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check in resource_log_pipe_topology_update [WHY] When switching from "Extend" to "Second Display Only" we sometimes call resource_get_otg_master_for_stream on a stream for the eDP, which is disconnected. This leads to a null pointer dereference. [HOW] Added a null check in dc_resource.c/resource_log_pipe_topology_update.

In the Linux kernel, the following vulnerability has been resolved: net/tcp: Disable TCP-AO static key after RCU grace period The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). See the comment near the definition: > * The caller must make sure that the static key can't get disabled while > * in this function. It doesn't patch jump labels, only adds a user to > * an already enabled static key. Originally it was introduced in commit eb8c507296f6 ("jump_label: Prevent key->enabled int overflow"), which is needed for the atomic contexts, one of which would be the creation of a full socket from a request socket. In that atomic context, it's known by the presence of the key (md5/ao) that the static branch is already enabled. So, the ref counter for that static branch is just incremented instead of holding the proper mutex. static_key_fast_inc_not_disabled() is just a helper for such usage case. But it must not be used if the static branch could get disabled in parallel as it's not protected by jump_label_mutex and as a result, races with jump_label_update() implementation details. Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr

In the Linux kernel, the following vulnerability has been resolved: mm: list_lru: fix UAF for memory cgroup The mem_cgroup_from_slab_obj() is supposed to be called under rcu lock or cgroup_mutex or others which could prevent returned memcg from being freed. Fix it by adding missing rcu read lock. Found by code inspection. [songmuchun@bytedance.com: only grab rcu lock when necessary, per Vlastimil] Link: https://lkml.kernel.org/r/20240801024603.1865-1-songmuchun@bytedance.com

In the Linux kernel, the following vulnerability has been resolved: padata: Fix possible divide-by-0 panic in padata_mt_helper() We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt".

In the Linux kernel, the following vulnerability has been resolved: tracing: Have format file honor EVENT_FILE_FL_FREED When eventfs was introduced, special care had to be done to coordinate the freeing of the file meta data with the files that are exposed to user space. The file meta data would have a ref count that is set when the file is created and would be decremented and freed after the last user that opened the file closed it. When the file meta data was to be freed, it would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed, and any new references made (like new opens or reads) would fail as it is marked freed. This allowed other meta data to be freed after this flag was set (under the event_mutex). All the files that were dynamically created in the events directory had a pointer to the file meta data and would call event_release() when the last reference to the user space file was closed. This would be the time that it is safe to free the file meta data. A shortcut was made for the "format" file. It's i_private would point to the "call" entry directly and not point to the file's meta data. This is because all format files are the same for the same "call", so it was thought there was no reason to differentiate them. The other files maintain state (like the "enable", "trigger", etc). But this meant if the file were to disappear, the "format" file would be unaware of it. This caused a race that could be trigger via the user_events test (that would create dynamic events and free them), and running a loop that would read the user_events format files: In one console run: # cd tools/testing/selftests/user_events # while true; do ./ftrace_test; done And in another console run: # cd /sys/kernel/tracing/ # while true; do cat events/user_events/__test_event/format; done 2>/dev/null With KASAN memory checking, it would trigger a use-after-free bug report (which was a real bug). This was because the format file was not checking the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the event that the file meta data pointed to after the event was freed. After inspection, there are other locations that were found to not check the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a new helper function: event_file_file() that will make sure that the event_mutex is held, and will return NULL if the trace_event_file has the EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file pointer use event_file_file() and check for NULL. Later uses can still use the event_file_data() helper function if the event_mutex is still held and was not released since the event_file_file() call.

In the Linux kernel, the following vulnerability has been resolved: memcg: protect concurrent access to mem_cgroup_idr Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against concurrency and can be run concurrently for different memcgs when they hit their refcnt to zero. Fix that. We have been seeing list_lru based kernel crashes at a low frequency in our fleet for a long time. These crashes were in different part of list_lru code including list_lru_add(), list_lru_del() and reparenting code. Upon further inspection, it looked like for a given object (dentry and inode), the super_block's list_lru didn't have list_lru_one for the memcg of that object. The initial suspicions were either the object is not allocated through kmem_cache_alloc_lru() or somehow memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but returned success. No evidence were found for these cases. Looking more deeply, we started seeing situations where valid memcg's id is not present in mem_cgroup_idr and in some cases multiple valid memcgs have same id and mem_cgroup_idr is pointing to one of them. So, the most reasonable explanation is that these situations can happen due to race between multiple idr_remove() calls or race between idr_alloc()/idr_replace() and idr_remove(). These races are causing multiple memcgs to acquire the same ID and then offlining of one of them would cleanup list_lrus on the system for all of them. Later access from other memcgs to the list_lru cause crashes due to missing list_lru_one.

In the Linux kernel, the following vulnerability has been resolved: ASoC: cs-amp-lib: Fix NULL pointer crash if efi.get_variable is NULL Call efi_rt_services_supported() to check that efi.get_variable exists before calling it.

In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401 When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing This commit adds null checks for the 'stream' and 'plane' variables in the dcn30_apply_idle_power_optimizations function. These variables were previously assumed to be null at line 922, but they were used later in the code without checking if they were null. This could potentially lead to a null pointer dereference, which would cause a crash. The null checks ensure that 'stream' and 'plane' are not null before they are used, preventing potential crashes. Fixes the below static smatch checker: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr Check return value and conduct null pointer handling to avoid null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/admgpu: fix dereferencing null pointer context When user space sets an invalid ta type, the pointer context will be empty. So it need to check the pointer context before using it

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules Check the pointer value to fix potential null pointer dereference

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the null pointer dereference to ras_manager Check ras_manager before using it

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table.

In the Linux kernel, the following vulnerability has been resolved: bpf: add missing check_func_arg_reg_off() to prevent out-of-bounds memory accesses Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to a global function as an argument. The adverse effects of this is that BPF helpers can continue to make use of this modified CONST_PTR_TO_DYNPTR from within the context of the global function, which can unintentionally result in out-of-bounds memory accesses and therefore compromise overall system stability i.e. [ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140 [ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302 [ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533 [ 244.174318] Call Trace: [ 244.175787] [ 244.177356] dump_stack_lvl+0x66/0xa0 [ 244.179531] print_report+0xce/0x670 [ 244.182314] ? __virt_addr_valid+0x200/0x3e0 [ 244.184908] kasan_report+0xd7/0x110 [ 244.187408] ? bpf_dynptr_data+0x137/0x140 [ 244.189714] ? bpf_dynptr_data+0x137/0x140 [ 244.192020] bpf_dynptr_data+0x137/0x140 [ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26 [ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23 [ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570 [ 244.204744] ? 0xffffffffc0009e58 [ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10 [ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b [ 244.215922] bpf_trampoline_6442502480+0x43/0xe3 [ 244.218691] __x64_sys_prlimit64+0x9/0xf0 [ 244.220912] do_syscall_64+0xc1/0x1d0 [ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 244.226458] RIP: 0033:0x7ffa3eb8f059 [ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48 [ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e [ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059 [ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0 [ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000 [ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80 [ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000 [ 244.268303] Add a check_func_arg_reg_off() to the path in which the BPF verifier verifies the arguments of global function arguments, specifically those which take an argument of type ARG_PTR_TO_DYNPTR | MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any explicit and strict type matching on the supplied register type, so let's also enforce that a register either type PTR_TO_STACK or CONST_PTR_TO_DYNPTR is by the caller.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL dereference at band check in starting tx ba session In MLD connection, link_data/link_conf are dynamically allocated. They don't point to vif->bss_conf. So, there will be no chanreq assigned to vif->bss_conf and then the chan will be NULL. Tweak the code to check ht_supported/vht_supported/has_he/has_eht on sta deflink. Crash log (with rtw89 version under MLO development): [ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 9890.526102] #PF: supervisor read access in kernel mode [ 9890.526105] #PF: error_code(0x0000) - not-present page [ 9890.526109] PGD 0 P4D 0 [ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI [ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G OE 6.9.0 #1 [ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018 [ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core] [ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211 [ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3 All code ======== 0: f7 e8 imul %eax 2: d5 (bad) 3: 93 xchg %eax,%ebx 4: 3e ea ds (bad) 6: 48 83 c4 28 add $0x28,%rsp a: 89 d8 mov %ebx,%eax c: 5b pop %rbx d: 41 5c pop %r12 f: 41 5d pop %r13 11: 41 5e pop %r14 13: 41 5f pop %r15 15: 5d pop %rbp 16: c3 retq 17: cc int3 18: cc int3 19: cc int3 1a: cc int3 1b: 49 8b 84 24 e0 f1 ff mov -0xe20(%r12),%rax 22: ff 23: 48 8b 80 90 1b 00 00 mov 0x1b90(%rax),%rax 2a:* 83 38 03 cmpl $0x3,(%rax) <-- trapping instruction 2d: 0f 84 37 fe ff ff je 0xfffffffffffffe6a 33: bb ea ff ff ff mov $0xffffffea,%ebx 38: eb cc jmp 0x6 3a: 49 rex.WB 3b: 8b .byte 0x8b 3c: 84 24 10 test %ah,(%rax,%rdx,1) 3f: f3 repz Code starting with the faulting instruction =========================================== 0: 83 38 03 cmpl $0x3,(%rax) 3: 0f 84 37 fe ff ff je 0xfffffffffffffe40 9: bb ea ff ff ff mov $0xffffffea,%ebx e: eb cc jmp 0xffffffffffffffdc 10: 49 rex.WB 11: 8b .byte 0x8b 12: 84 24 10 test %ah,(%rax,%rdx,1) 15: f3 repz [ 9890.526285] RSP: 0018:ffffb8db09013d68 EFLAGS: 00010246 [ 9890.526291] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9308e0d656c8 [ 9890.526295] RDX: 0000000000000000 RSI: ffffffffab99460b RDI: ffffffffab9a7685 [ 9890.526300] RBP: ffffb8db09013db8 R08: 0000000000000000 R09: 0000000000000873 [ 9890.526304] R10: ffff9308e0d64800 R11: 0000000000000002 R12: ffff9308e5ff6e70 [ 9890.526308] R13: ffff930952500e20 R14: ffff9309192a8c00 R15: 0000000000000000 [ 9890.526313] FS: 0000000000000000(0000) GS:ffff930b4e700000(0000) knlGS:0000000000000000 [ 9890.526316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9890.526318] CR2: 0000000000000000 CR3: 0000000391c58005 CR4: 00000000001706f0 [ 9890.526321] Call Trace: [ 9890.526324] [ 9890.526327] ? show_regs (arch/x86/kernel/dumpstack.c:479) [ 9890.526335] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 9890.526340] ? page_fault_oops (arch/x86/mm/fault.c:713) [ 9890.526347] ? search_module_extables (kernel/module/main.c:3256 (discriminator ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: disallow setting special AP channel widths Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that.

In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure.

In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid BUG_ON() while continue reshape after reassembling Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata.

In the Linux kernel, the following vulnerability has been resolved: gpio: prevent potential speculation leaks in gpio_device_get_desc() Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix UAFs when destroying the queues The second tagged commit started sometimes (very rarely, but possible) throwing WARNs from net/core/page_pool.c:page_pool_disable_direct_recycling(). Turned out idpf frees interrupt vectors with embedded NAPIs *before* freeing the queues making page_pools' NAPI pointers lead to freed memory before these pools are destroyed by libeth. It's not clear whether there are other accesses to the freed vectors when destroying the queues, but anyway, we usually free queue/interrupt vectors only when the queues are destroyed and the NAPIs are guaranteed to not be referenced anywhere. Invert the allocation and freeing logic making queue/interrupt vectors be allocated first and freed last. Vectors don't require queues to be present, so this is safe. Additionally, this change allows to remove that useless queue->q_vector pointer cleanup, as vectors are still valid when freeing the queues (+ both are freed within one function, so it's not clear why nullify the pointers at all).

In the Linux kernel, the following vulnerability has been resolved: bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false). With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison: if (old_rx_rings != bp->hw_resc.resv_rx_rings) in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index. We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression: BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 Read of size 2 at addr ffff8881c5809618 by task ethtool/31525 Call Trace: __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460 __bnxt_setup_vnic_p5+0x12e/0x270 __bnxt_open_nic+0x2262/0x2f30 bnxt_open_nic+0x5d/0xf0 ethnl_set_channels+0x5d4/0xb30 ethnl_default_set_doit+0x2f1/0x620

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437

In the Linux kernel, the following vulnerability has been resolved: sctp: Fix null-ptr-deref in reuseport_add_sock(). syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: power: supply: rt5033: Bring back i2c_set_clientdata Commit 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper") reworked the driver to use devm. While at it, the i2c_set_clientdata was dropped along with the remove callback. Unfortunately other parts of the driver also rely on i2c clientdata so this causes kernel oops. Bring the call back to fix the driver.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel-vbtn: Protect ACPI notify handler against recursion Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may run on multiple CPU cores racing with themselves. This race gets hit on Dell Venue 7140 tablets when undocking from the keyboard, causing the handler to try and register priv->switches_dev twice, as can be seen from the dev_info() message getting logged twice: [ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event [ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17 [ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event After which things go seriously wrong: [ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17' ... [ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory. [ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018 ... Protect intel-vbtn notify_handler() from racing with itself with a mutex to fix this.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inline.c:258! CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0 RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258 Call Trace: f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315 do_writepages+0x35b/0x870 mm/page-writeback.c:2612 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117 wb_do_writeback fs/fs-writeback.c:2264 [inline] wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f2/0x390 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The root cause is: inline_data inode can be fuzzed, so that there may be valid blkaddr in its direct node, once f2fs triggers background GC to migrate the block, it will hit f2fs_bug_on() during dirty page writeback. Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC, so that, it can forbid migrating inline_data inode's data block for fixing.

In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated---

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix deadlock during RTC update There is a deadlock when runtime suspend waits for the flush of RTC work, and the RTC work calls ufshcd_rpm_get_sync() to wait for runtime resume. Here is deadlock backtrace: kworker/0:1 D 4892.876354 10 10971 4859 0x4208060 0x8 10 0 120 670730152367 ptr f0ffff80c2e40000 0 1 0x00000001 0x000000ff 0x000000ff 0x000000ff __switch_to+0x1a8/0x2d4 __schedule+0x684/0xa98 schedule+0x48/0xc8 schedule_timeout+0x48/0x170 do_wait_for_common+0x108/0x1b0 wait_for_completion+0x44/0x60 __flush_work+0x39c/0x424 __cancel_work_sync+0xd8/0x208 cancel_delayed_work_sync+0x14/0x28 __ufshcd_wl_suspend+0x19c/0x480 ufshcd_wl_runtime_suspend+0x3c/0x1d4 scsi_runtime_suspend+0x78/0xc8 __rpm_callback+0x94/0x3e0 rpm_suspend+0x2d4/0x65c __pm_runtime_suspend+0x80/0x114 scsi_runtime_idle+0x38/0x6c rpm_idle+0x264/0x338 __pm_runtime_idle+0x80/0x110 ufshcd_rtc_work+0x128/0x1e4 process_one_work+0x26c/0x650 worker_thread+0x260/0x3d8 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Skip updating RTC if RPM state is not RPM_ACTIVE.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/preempt_fence: enlarge the fence critical section It is really easy to introduce subtle deadlocks in preempt_fence_work_func() since we operate on single global ordered-wq for signalling our preempt fences behind the scenes, so even though we signal a particular fence, everything in the callback should be in the fence critical section, since blocking in the callback will prevent other published fences from signalling. If we enlarge the fence critical section to cover the entire callback, then lockdep should be able to understand this better, and complain if we grab a sensitive lock like vm->lock, which is also held when waiting on preempt fences.

In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Switch from mutex to spinlock for irqfds irqfd_wakeup() gets EPOLLHUP, when it is called by eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which gets called under spin_lock_irqsave(). We can't use a mutex here as it will lead to a deadlock. Fix it by switching over to a spin lock.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leaks and crashes while performing a soft reset The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: avoid possible UaF when selecting endp select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with.

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask() UBSAN reports the following 'subtraction overflow' error when booting in a virtual machine on Android: | Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4 | Hardware name: linux,dummy-virt (DT) | pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cancel_delayed_work+0x34/0x44 | lr : cancel_delayed_work+0x2c/0x44 | sp : ffff80008002ba60 | x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0 | x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058 | x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d | x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000 | x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000 | x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553 | x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620 | x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | cancel_delayed_work+0x34/0x44 | deferred_probe_extend_timeout+0x20/0x70 | driver_register+0xa8/0x110 | __platform_driver_register+0x28/0x3c | syscon_init+0x24/0x38 | do_one_initcall+0xe4/0x338 | do_initcall_level+0xac/0x178 | do_initcalls+0x5c/0xa0 | do_basic_setup+0x20/0x30 | kernel_init_freeable+0x8c/0xf8 | kernel_init+0x28/0x1b4 | ret_from_fork+0x10/0x20 | Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception This is due to shift_and_mask() using a signed immediate to construct the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so that it ends up decrementing from INT_MIN. Use an unsigned constant '1U' to generate the mask in shift_and_mask().

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UAF in ip6_xmit() If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in ip6_finish_output2() If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent UAF in ip6_send_skb() syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80

In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer.

In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid possible NULL dereference in cifs_free_subrequest() Clang static checker (scan-build) warning: cifsglob.h:line 890, column 3 Access to field 'ops' results in a dereference of a null pointer. Commit 519be989717c ("cifs: Add a tracepoint to track credits involved in R/W requests") adds a check for 'rdata->server', and let clang throw this warning about NULL dereference. When 'rdata->credits.value != 0 && rdata->server == NULL' happens, add_credits_and_wake_if() will call rdata->server->ops->add_credits(). This will cause NULL dereference problem. Add a check for 'rdata->server' to avoid NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()` When enabling UBSAN on Raspberry Pi 5, we get the following warning: [ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3 [ 387.903868] index 7 is out of range for type '__u32 [7]' [ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151 [ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched] [ 387.932525] Call trace: [ 387.935296] dump_backtrace+0x170/0x1b8 [ 387.939403] show_stack+0x20/0x38 [ 387.942907] dump_stack_lvl+0x90/0xd0 [ 387.946785] dump_stack+0x18/0x28 [ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0 [ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d] [ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ 387.966862] process_one_work+0x62c/0xb48 [ 387.971296] worker_thread+0x468/0x5b0 [ 387.975317] kthread+0x1c4/0x1e0 [ 387.978818] ret_from_fork+0x10/0x20 [ 387.983014] ---[ end trace ]--- This happens because the UAPI provides only seven configuration registers and we are reading the eighth position of this u32 array. Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by accessing only seven positions on the '__u32 [7]' array. The eighth register exists indeed on V3D 7.1, but it isn't currently used. That being so, let's guarantee that it remains unused and add a note that it could be set in a future patch.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start ¦ ? ...... setup tc ¦ ¦ ? ? DOWN: napi_disable() napi_disable()(skip) ¦ ¦ ¦ ? ? ...... ...... ¦ ¦ ? ¦ napi_enable() ¦ ? UINIT: netif_napi_del() ¦ ? ...... ¦ ? INIT: netif_napi_add() ¦ ? ...... global reset start ¦ ¦ ? ? UP: napi_enable()(skip) ...... ¦ ¦ ? ? ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_wed: fix use-after-free panic in mtk_wed_setup_tc_block_cb() When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... ---------

In the Linux kernel, the following vulnerability has been resolved: atm: idt77252: prevent use after free in dequeue_rx() We can't dereference "skb" after calling vcc->push() because the skb is released.

In the Linux kernel, the following vulnerability has been resolved: gtp: pull network headers in gtp_dev_xmit() syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024

In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.

In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

deepin-default-settings содержит системные настройки

There is a MEDIUM severity vulnerability affecting CPython. Regular expressions that allowed excessive backtracking during tarfile.TarFile header parsing are vulnerable to ReDoS via specifically-crafted tar archives.

There is a LOW severity vulnerability affecting CPython, specifically the 'http.cookies' standard library module. When parsing cookies that contained backslashes for quoted characters in the cookie value, the parser would use an algorithm with quadratic complexity, resulting in excess CPU resources being used while parsing the value.

deepin-default-settings содержит системные настройки

Уязвимость систем управления IP-телефонией Asterisk и Certified Asterisk, связанная с ошибками отправки SIP-запроса в URI, позволяющая нарушителю вызвать аварийное завершение работы приложения

Asterisk is an open-source private branch exchange (PBX). Prior to versions 18.24.3, 20.9.3, and 21.4.3 of Asterisk and versions 18.9-cert12 and 20.7-cert2 of certified-asterisk, if Asterisk attempts to send a SIP request to a URI whose host portion starts with `.1` or `[.1]`, and res_resolver_unbound is loaded, Asterisk will crash with a SEGV. To receive a patch, users should upgrade to one of the following versions: 18.24.3, 20.9.3, 21.4.3, certified-18.9-cert12, certified-20.7-cert2. Two workarounds are available. Disable res_resolver_unbound by setting `noload = res_resolver_unbound.so` in modules.conf, or set `rewrite_contact = yes` on all PJSIP endpoints. NOTE: This may not be appropriate for all Asterisk configurations.