Неверное сообщение о допустимом имени хоста

Уязвимость функции perf_group_detach() утилиты perf ядра операционных систем Linux, позволяющая нарушителю повысить свои привилегии

Уязвимость функций ext4_mb_clear_bb() и ext4_free_blocks() ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции pick_file() в модуле fs/file.c файловой системы ядра операционной системы Linux, позволяющая нарушителю получить доступ к защищаемой информации или вызвать отказ в обслуживании

Уязвимость функции iommu_debugfs_add() в модуле arch/powerpc/kernel/iommu.c поддержки платформы PowerPC ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ext4_load_journal() в модуле fs/ext4/super.c файловой системы Ext4 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции lookup_rec() модуля kernel/trace/ftrace.c поддержки трассировки ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции loop_queue_rq() модуля drivers/block/loop.c драйвера блочных устройств ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции __smc_lgr_terminate() модуля net/smc/smc_core.c реализации семейства протоколов сокетов SMC ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ice_get_module_eeprom() модуля drivers/net/ethernet/intel/ice/ice_ethtool.c драйвера сетевых адаптеров Ethernet Intel ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции drm_gem_shmem_mmap() модуля drivers/gpu/drm/drm_gem_shmem_helper.c драйвера инфраструктуры прямого рендеринга (DRI) ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции do_feature_check_call() модуля drivers/firmware/xilinx/zynqmp.c драйвера прошивок ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ndlc_remove() модуля drivers/nfc/st-nci/ndlc.c драйвера NFC ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции __nvmet_req_complete() модуля drivers/nvme/target/core.c драйвера NVME ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции smsc75xx_rx_fixup() модуля drivers/net/usb/smsc75xx.c драйвера сетевых адаптеров USB ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции cfusbl_device_notify() модуля net/caif/caif_usb.c реализации сетевых функций ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции queue_oob() модуля net/unix/af_unix.c ядра операционной системы Linux, позволяющая нарушителю получить доступ к защищаемой информации или вызвать отказ в обслуживании

Уязвимость функции icc_node_destroy() модуля drivers/interconnect/core.c драйвера межсоединений ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции fdp_nci_i2c_read_device_properties() модуля drivers/nfc/fdp/i2c.c драйвера NFC ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции walk_stackframe() модуля arch/riscv/kernel/stacktrace.c подсистемы управления модулями платформы с архитектурой RISCV ядра операционной системы Linux, позволяющая нарушителю получить доступ к защищаемой информации или вызвать отказ в обслуживании

Уязвимость функции svc_stop_kthreads() модуля net/sunrpc/svc.c реализации протокола RPC ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции exynos_generic_icc_probe() модуля drivers/interconnect/samsung/exynos.c драйвера межсоединений ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции swap_inode_boot_loader() модуля fs/ext4/ioctl.c файловой системы Ext4 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ext4_expand_extra_isize_ea() модуля fs/ext4/xattr.c файловой системы Ext4 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции gpio_ir_recv_remove() модуля drivers/media/rc/gpio-ir-recv.c драйвера мультимедийных устройств ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ext4_xattr_inode_iget() модуля fs/ext4/xattr.c файловой системы Ext4 ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции ila_xlat_nl_cmd_get_mapping() модуля net/ipv6/ila/ila_xlat.c ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость компонента net ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость компонента PCI ядра операционной системы Linux, позволяющая нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации

Уязвимость функции tcp_bpf_recvmsg_parser ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции in_atomic() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

Уязвимость функции rdtgroup_mkdir() ядра операционной системы Linux, позволяющая нарушителю вызвать отказ в обслуживании

In the Linux kernel, the following vulnerability has been resolved: ext4: block range must be validated before use in ext4_mb_clear_bb() Block range to free is validated in ext4_free_blocks() using ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb(). However in some situations on bigalloc file system the range might be adjusted after the validation in ext4_free_blocks() which can lead to troubles on corrupted file systems such as one found by syzkaller that resulted in the following BUG kernel BUG at fs/ext4/ext4.h:3319! PREEMPT SMP NOPTI CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014 RIP: 0010:ext4_free_blocks+0x95e/0xa90 Call Trace: ? lock_timer_base+0x61/0x80 ? __es_remove_extent+0x5a/0x760 ? __mod_timer+0x256/0x380 ? ext4_ind_truncate_ensure_credits+0x90/0x220 ext4_clear_blocks+0x107/0x1b0 ext4_free_data+0x15b/0x170 ext4_ind_truncate+0x214/0x2c0 ? _raw_spin_unlock+0x15/0x30 ? ext4_discard_preallocations+0x15a/0x410 ? ext4_journal_check_start+0xe/0x90 ? __ext4_journal_start_sb+0x2f/0x110 ext4_truncate+0x1b5/0x460 ? __ext4_journal_start_sb+0x2f/0x110 ext4_evict_inode+0x2b4/0x6f0 evict+0xd0/0x1d0 ext4_enable_quotas+0x11f/0x1f0 ext4_orphan_cleanup+0x3de/0x430 ? proc_create_seq_private+0x43/0x50 ext4_fill_super+0x295f/0x3ae0 ? snprintf+0x39/0x40 ? sget_fc+0x19c/0x330 ? ext4_reconfigure+0x850/0x850 get_tree_bdev+0x16d/0x260 vfs_get_tree+0x25/0xb0 path_mount+0x431/0xa70 __x64_sys_mount+0xe2/0x120 do_syscall_64+0x5b/0x80 ? do_user_addr_fault+0x1e2/0x670 ? exc_page_fault+0x70/0x170 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fdf4e512ace Fix it by making sure that the block range is properly validated before used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb().

A use-after-free vulnerability in the Linux Kernel Performance Events system can be exploited to achieve local privilege escalation. The perf_group_detach function did not check the event's siblings' attach_state before calling add_event_to_groups(), but remove_on_exec made it possible to call list_del_event() on before detaching from their group, making it possible to use a dangling pointer causing a use-after-free vulnerability. We recommend upgrading past commit fd0815f632c24878e325821943edccc7fde947a2.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix invalid address access in lookup_rec() when index is 0 KASAN reported follow problem: BUG: KASAN: use-after-free in lookup_rec Read of size 8 at addr ffff000199270ff0 by task modprobe CPU: 2 Comm: modprobe Call trace: kasan_report __asan_load8 lookup_rec ftrace_location arch_check_ftrace_location check_kprobe_address_safe register_kprobe When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a pg which is newly added to ftrace_pages_start in ftrace_process_locs(). Before the first pg->index++, index is 0 and accessing pg->records[-1].ip will cause this problem. Don't check the ip when pg->index is 0.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes [WHY] When PTEBufferSizeInRequests is zero, UBSAN reports the following warning because dml_log2 returns an unexpected negative value: shift exponent 4294966273 is too large for 32-bit type 'int' [HOW] In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and assign the result directly.

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove another errant put in error path drm_gem_shmem_mmap() doesn't own reference in error code path, resulting in the dma-buf shmem GEM object getting prematurely freed leading to a later use-after-free.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/active: Fix misuse of non-idle barriers as fence trackers Users reported oopses on list corruptions when using i915 perf with a number of concurrently running graphics applications. Root cause analysis pointed at an issue in barrier processing code -- a race among perf open / close replacing active barriers with perf requests on kernel context and concurrent barrier preallocate / acquire operations performed during user context first pin / last unpin. When adding a request to a composite tracker, we try to reuse an existing fence tracker, already allocated and registered with that composite. The tracker we obtain may already track another fence, may be an idle barrier, or an active barrier. If the tracker we get occurs a non-idle barrier then we try to delete that barrier from a list of barrier tasks it belongs to. However, while doing that we don't respect return value from a function that performs the barrier deletion. Should the deletion ever fail, we would end up reusing the tracker still registered as a barrier task. Since the same structure field is reused with both fence callback lists and barrier tasks list, list corruptions would likely occur. Barriers are now deleted from a barrier tasks list by temporarily removing the list content, traversing that content with skip over the node to be deleted, then populating the list back with the modified content. Should that intentionally racy concurrent deletion attempts be not serialized, one or more of those may fail because of the list being temporary empty. Related code that ignores the results of barrier deletion was initially introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"). However, all users of the barrier deletion routine were apparently serialized at that time, then the issue didn't exhibit itself. Results of git bisect with help of a newly developed igt@gem_barrier_race@remote-request IGT test indicate that list corruptions might start to appear after commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), introduced in v5.5. Respect results of barrier deletion attempts -- mark the barrier as idle only if successfully deleted from the list. Then, before proceeding with setting our fence as the one currently tracked, make sure that the tracker we've got is not a non-idle barrier. If that check fails then don't use that tracker but go back and try to acquire a new, usable one. v3: use unlikely() to document what outcome we expect (Andi), - fix bad grammar in commit description. v2: no code changes, - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"), v5.4, - reword commit description. (cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7)

In the Linux kernel, the following vulnerability has been resolved: ext4: fix task hung in ext4_xattr_delete_inode Syzbot reported a hung task problem: ================================================================== INFO: task syz-executor232:5073 blocked for more than 143 seconds. Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:5244 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6555 schedule+0xcb/0x190 kernel/sched/core.c:6631 __wait_on_freeing_inode fs/inode.c:2196 [inline] find_inode_fast+0x35a/0x4c0 fs/inode.c:950 iget_locked+0xb1/0x830 fs/inode.c:1273 __ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861 ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389 ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148 ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880 ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296 evict+0x2a4/0x620 fs/inode.c:664 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa5406fd5ea RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970 RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432 R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004 R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000 ================================================================== The problem is that the inode contains an xattr entry with ea_inum of 15 when cleaning up an orphan inode <15>. When evict inode <15>, the reference counting of the corresponding EA inode is decreased. When EA inode <15> is found by find_inode_fast() in __ext4_iget(), it is found that the EA inode holds the I_FREEING flag and waits for the EA inode to complete deletion. As a result, when inode <15> is being deleted, we wait for inode <15> to complete the deletion, resulting in an infinite loop and triggering Hung Task. To solve this problem, we only need to check whether the ino of EA inode and parent is the same before getting EA inode.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix an illegal memory access In the kfd_wait_on_events() function, the kfd_event_waiter structure is allocated by alloc_event_waiters(), but the event field of the waiter structure is not initialized; When copy_from_user() fails in the kfd_wait_on_events() function, it will enter exception handling to release the previously allocated memory of the waiter structure; Due to the event field of the waiters structure being accessed in the free_waiters() function, this results in illegal memory access and system crash, here is the crash log: localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0 localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082 localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000 localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0 localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64 localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002 localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698 localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000 localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0 localhost kernel: Call Trace: localhost kernel: _raw_spin_lock_irqsave+0x30/0x40 localhost kernel: remove_wait_queue+0x12/0x50 localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu] localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu] localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: __x64_sys_ioctl+0x8e/0xd0 localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0 localhost kernel: do_syscall_64+0x33/0x80 localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 localhost kernel: RIP: 0033:0x152a4dff68d7 Allocate the structure with kcalloc, and remove redundant 0-initialization and a redundant loop condition check.

In the Linux kernel, the following vulnerability has been resolved: ext4: update s_journal_inum if it changes after journal replay When mounting a crafted ext4 image, s_journal_inum may change after journal replay, which is obviously unreasonable because we have successfully loaded and replayed the journal through the old s_journal_inum. And the new s_journal_inum bypasses some of the checks in ext4_get_journal(), which may trigger a null pointer dereference problem. So if s_journal_inum changes after the journal replay, we ignore the change, and rewrite the current journal_inum to the superblock.

In the Linux kernel, the following vulnerability has been resolved: interconnect: exynos: fix node leak in probe PM QoS error path Make sure to add the newly allocated interconnect node to the provider before adding the PM QoS request so that the node is freed on errors.

In the Linux kernel, the following vulnerability has been resolved: interconnect: fix mem leak when freeing nodes The node link array is allocated when adding links to a node but is not deallocated when nodes are destroyed.

In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: media: rc: gpio-ir-recv: add remove function In case runtime PM is enabled, do runtime PM clean up to remove cpu latency qos request, otherwise driver removal may have below kernel dump: [ 19.463299] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 19.472161] Mem abort info: [ 19.474985] ESR = 0x0000000096000004 [ 19.478754] EC = 0x25: DABT (current EL), IL = 32 bits [ 19.484081] SET = 0, FnV = 0 [ 19.487149] EA = 0, S1PTW = 0 [ 19.490361] FSC = 0x04: level 0 translation fault [ 19.495256] Data abort info: [ 19.498149] ISV = 0, ISS = 0x00000004 [ 19.501997] CM = 0, WnR = 0 [ 19.504977] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000049f81000 [ 19.511432] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000 [ 19.518245] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 19.524520] Modules linked in: gpio_ir_recv(+) rc_core [last unloaded: rc_core] [ 19.531845] CPU: 0 PID: 445 Comm: insmod Not tainted 6.2.0-rc1-00028-g2c397a46d47c #72 [ 19.531854] Hardware name: FSL i.MX8MM EVK board (DT) [ 19.531859] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.551777] pc : cpu_latency_qos_remove_request+0x20/0x110 [ 19.557277] lr : gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.557294] sp : ffff800008ce3740 [ 19.557297] x29: ffff800008ce3740 x28: 0000000000000000 x27: ffff800008ce3d50 [ 19.574270] x26: ffffc7e3e9cea100 x25: 00000000000f4240 x24: ffffc7e3f9ef0e30 [ 19.574284] x23: 0000000000000000 x22: ffff0061803820f4 x21: 0000000000000008 [ 19.574296] x20: ffffc7e3fa75df30 x19: 0000000000000020 x18: ffffffffffffffff [ 19.588570] x17: 0000000000000000 x16: ffffc7e3f9efab70 x15: ffffffffffffffff [ 19.595712] x14: ffff800008ce37b8 x13: ffff800008ce37aa x12: 0000000000000001 [ 19.602853] x11: 0000000000000001 x10: ffffcbe3ec0dff87 x9 : 0000000000000008 [ 19.609991] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 000000000f0bfe9f [ 19.624261] x5 : 00ffffffffffffff x4 : 0025ab8e00000000 x3 : ffff006180382010 [ 19.631405] x2 : ffffc7e3e9ce8030 x1 : ffffc7e3fc3eb810 x0 : 0000000000000020 [ 19.638548] Call trace: [ 19.640995] cpu_latency_qos_remove_request+0x20/0x110 [ 19.646142] gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.652339] pm_generic_runtime_suspend+0x2c/0x44 [ 19.657055] __rpm_callback+0x48/0x1dc [ 19.660807] rpm_callback+0x6c/0x80 [ 19.664301] rpm_suspend+0x10c/0x640 [ 19.667880] rpm_idle+0x250/0x2d0 [ 19.671198] update_autosuspend+0x38/0xe0 [ 19.675213] pm_runtime_set_autosuspend_delay+0x40/0x60 [ 19.680442] gpio_ir_recv_probe+0x1b4/0x21c [gpio_ir_recv] [ 19.685941] platform_probe+0x68/0xc0 [ 19.689610] really_probe+0xc0/0x3dc [ 19.693189] __driver_probe_device+0x7c/0x190 [ 19.697550] driver_probe_device+0x3c/0x110 [ 19.701739] __driver_attach+0xf4/0x200 [ 19.705578] bus_for_each_dev+0x70/0xd0 [ 19.709417] driver_attach+0x24/0x30 [ 19.712998] bus_add_driver+0x17c/0x240 [ 19.716834] driver_register+0x78/0x130 [ 19.720676] __platform_driver_register+0x28/0x34 [ 19.725386] gpio_ir_recv_driver_init+0x20/0x1000 [gpio_ir_recv] [ 19.731404] do_one_initcall+0x44/0x2ac [ 19.735243] do_init_module+0x48/0x1d0 [ 19.739003] load_module+0x19fc/0x2034 [ 19.742759] __do_sys_finit_module+0xac/0x12c [ 19.747124] __arm64_sys_finit_module+0x20/0x30 [ 19.751664] invoke_syscall+0x48/0x114 [ 19.755420] el0_svc_common.constprop.0+0xcc/0xec [ 19.760132] do_el0_svc+0x38/0xb0 [ 19.763456] el0_svc+0x2c/0x84 [ 19.766516] el0t_64_sync_handler+0xf4/0x120 [ 19.770789] el0t_64_sync+0x190/0x194 [ 19.774460] Code: 910003fd a90153f3 aa0003f3 91204021 (f9401400) [ 19.780556] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: firmware: xilinx: don't make a sleepable memory allocation from an atomic context The following issue was discovered using lockdep: [ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209 [ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 6.702431] 2 locks held by swapper/0/1: [ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90 [ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140 [ 6.723156] irq event stamp: 304030 [ 6.726596] hardirqs last enabled at (304029): [] _raw_spin_unlock_irqrestore+0xc0/0xd0 [ 6.736142] hardirqs last disabled at (304030): [] clk_enable_lock+0xfc/0x140 [ 6.744742] softirqs last enabled at (303958): [] _stext+0x4f0/0x894 [ 6.752655] softirqs last disabled at (303951): [] irq_exit+0x238/0x280 [ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2 [ 6.768048] Hardware name: xlnx,zynqmp (DT) [ 6.772179] Call trace: [ 6.774584] dump_backtrace+0x0/0x300 [ 6.778197] show_stack+0x18/0x30 [ 6.781465] dump_stack_lvl+0xb8/0xec [ 6.785077] dump_stack+0x1c/0x38 [ 6.788345] ___might_sleep+0x1a8/0x2a0 [ 6.792129] __might_sleep+0x6c/0xd0 [ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0 [ 6.800127] do_feature_check_call+0x100/0x220 [ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0 [ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0 [ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120 [ 6.817327] zynqmp_pll_enable+0x38/0xc0 [ 6.821197] clk_core_enable+0x144/0x400 [ 6.825067] clk_core_enable+0xd4/0x400 [ 6.828851] clk_core_enable+0xd4/0x400 [ 6.832635] clk_core_enable+0xd4/0x400 [ 6.836419] clk_core_enable+0xd4/0x400 [ 6.840203] clk_core_enable+0xd4/0x400 [ 6.843987] clk_core_enable+0xd4/0x400 [ 6.847771] clk_core_enable+0xd4/0x400 [ 6.851555] clk_core_enable_lock+0x24/0x50 [ 6.855683] clk_enable+0x24/0x40 [ 6.858952] fclk_probe+0x84/0xf0 [ 6.862220] platform_probe+0x8c/0x110 [ 6.865918] really_probe+0x110/0x5f0 [ 6.869530] __driver_probe_device+0xcc/0x210 [ 6.873830] driver_probe_device+0x64/0x140 [ 6.877958] __driver_attach+0x114/0x1f0 [ 6.881828] bus_for_each_dev+0xe8/0x160 [ 6.885698] driver_attach+0x34/0x50 [ 6.889224] bus_add_driver+0x228/0x300 [ 6.893008] driver_register+0xc0/0x1e0 [ 6.896792] __platform_driver_register+0x44/0x60 [ 6.901436] fclk_driver_init+0x1c/0x28 [ 6.905220] do_one_initcall+0x104/0x590 [ 6.909091] kernel_init_freeable+0x254/0x2bc [ 6.913390] kernel_init+0x24/0x130 [ 6.916831] ret_from_fork+0x10/0x20 Fix it by passing the GFP_ATOMIC gfp flag for the corresponding memory allocation.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix WARNING in ext4_update_inline_data Syzbot found the following issue: EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni" fscrypt: AES-256-XTS using implementation "xts-aes-aesni" ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525 Modules linked in: CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525 RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246 RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000 RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248 RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220 R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40 R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c FS: 0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __alloc_pages_node include/linux/gfp.h:237 [inline] alloc_pages_node include/linux/gfp.h:260 [inline] __kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113 __do_kmalloc_node mm/slab_common.c:956 [inline] __kmalloc+0xfe/0x190 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] kzalloc include/linux/slab.h:720 [inline] ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346 ext4_update_inline_dir fs/ext4/inline.c:1115 [inline] ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307 ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385 ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772 ext4_create+0x36c/0x560 fs/ext4/namei.c:2817 lookup_open fs/namei.c:3413 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x12ac/0x2dd0 fs/namei.c:3711 do_filp_open+0x264/0x4f0 fs/namei.c:3741 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_openat fs/open.c:1342 [inline] __se_sys_openat fs/open.c:1337 [inline] __x64_sys_openat+0x243/0x290 fs/open.c:1337 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue happens as follows: ext4_iget ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60 ext4_try_add_inline_entry __ext4_mark_inode_dirty ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44 ext4_xattr_shift_entries ->after shift i_inline_off is incorrect, actually is change to 176 ext4_try_add_inline_entry ext4_update_inline_dir get_max_inline_xattr_value_size if (EXT4_I(inode)->i_inline_off) entry = (struct ext4_xattr_entry *)((void *)raw_inode + EXT4_I(inode)->i_inline_off); free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size)); ->As entry is incorrect, then 'free' may be negative ext4_update_inline_data value = kzalloc(len, GFP_NOFS); -> len is unsigned int, maybe very large, then trigger warning when 'kzalloc()' To resolve the above issue we need to update 'i_inline_off' after 'ext4_xattr_shift_entries()'. We do not need to set EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty() already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA when it is needed may trigger a BUG_ON in ext4_writepages().

In the Linux kernel, the following vulnerability has been resolved: ext4: zero i_disksize when initializing the bootloader inode If the boot loader inode has never been used before, the EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the i_size to 0. However, if the "never before used" boot loader has a non-zero i_size, then i_disksize will be non-zero, and the inconsistency between i_size and i_disksize can trigger a kernel warning: WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa RIP: 0010:ext4_file_write_iter+0xbc7/0xd10 Call Trace: vfs_write+0x3b1/0x5c0 ksys_write+0x77/0x160 __x64_sys_write+0x22/0x30 do_syscall_64+0x39/0x80 Reproducer: 1. create corrupted image and mount it: mke2fs -t ext4 /tmp/foo.img 200 debugfs -wR "sif <5> size 25700" /tmp/foo.img mount -t ext4 /tmp/foo.img /mnt cd /mnt echo 123 > file 2. Run the reproducer program: posix_memalign(&buf, 1024, 1024) fd = open("file", O_RDWR | O_DIRECT); ioctl(fd, EXT4_IOC_SWAP_BOOT); write(fd, buf, 1024); Fix this by setting i_disksize as well as i_size to zero when initiaizing the boot loader inode.

In the Linux kernel, the following vulnerability has been resolved: ice: xsk: disable txq irq before flushing hw ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings().

In the Linux kernel, the following vulnerability has been resolved: bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails syzbot reported a warning[1] where the bond device itself is a slave and we try to enslave a non-ethernet device as the first slave which fails but then in the error path when ether_setup() restores the bond device it also clears all flags. In my previous fix[2] I restored the IFF_MASTER flag, but I didn't consider the case that the bond device itself might also be a slave with IFF_SLAVE set, so we need to restore that flag as well. Use the bond_ether_setup helper which does the right thing and restores the bond's flags properly. Steps to reproduce using a nlmon dev: $ ip l add nlmon0 type nlmon $ ip l add bond1 type bond $ ip l add bond2 type bond $ ip l set bond1 master bond2 $ ip l set dev nlmon0 master bond1 $ ip -d l sh dev bond1 22: bond1: mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we try to delete it) [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef [2] commit 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") [3] example warning: [ 27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address [ 27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address [ 32.464639] bond1 (unregistering): Released all slaves [ 32.464685] ------------[ cut here ]------------ [ 32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780 [ 32.464694] Modules linked in: br_netfilter bridge bonding virtio_net [ 32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47 [ 32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780 [ 32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59 [ 32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206 [ 32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000 [ 32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520 [ 32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728 [ 32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140 [ 32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140 [ 32.464723] FS: 00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000 [ 32.464725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0 [ 32.464730] Call Trace: [ 32.464763] [ 32.464767] rtnl_dellink+0x13e/0x380 [ 32.464776] ? cred_has_capability.isra.0+0x68/0x100 [ 32.464780] ? __rtnl_unlock+0x33/0x60 [ 32.464783] ? bpf_lsm_capset+0x10/0x10 [ 32.464786] ? security_capable+0x36/0x50 [ 32.464790] rtnetlink_rcv_msg+0x14e/0x3b0 [ 32.464792] ? _copy_to_iter+0xb1/0x790 [ 32.464796] ? post_alloc_hook+0xa0/0x160 [ 32.464799] ? rtnl_calcit.isra.0+0x110/0x110 [ 32.464802] netlink_rcv_skb+0x50/0xf0 [ 32.464806] netlink_unicast+0x216/0x340 [ 32.464809] netlink_sendmsg+0x23f/0x480 [ 32.464812] sock_sendmsg+0x5e/0x60 [ 32.464815] ____sys_sendmsg+0x22c/0x270 [ 32.464818] ? import_iovec+0x17/0x20 [ 32.464821] ? sendmsg_copy_msghdr+0x59/0x90 [ 32.464823] ? do_set_pte+0xa0/0xe0 [ 32.464828] ___sys_sendmsg+0x81/0xc0 [ 32.464832] ? mod_objcg_state+0xc6/0x300 [ 32.464835] ? refill_obj_stock+0xa9/0x160 [ 32.464838] ? memcg_slab_free_hook+0x1a5/0x1f0 [ 32.464842] __sys_sendm ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition This bug influences both st_nci_i2c_remove and st_nci_spi_remove. Take st_nci_i2c_remove as an example. In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work with llt_ndlc_sm_work. When it calls ndlc_recv or timeout handler, it will finally call schedule_work to start the work. When we call st_nci_i2c_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in ndlc_remove CPU0 CPU1 |llt_ndlc_sm_work st_nci_i2c_remove | ndlc_remove | st_nci_remove | nci_free_device| kfree(ndev) | //free ndlc->ndev | |llt_ndlc_rcv_queue |nci_recv_frame |//use ndlc->ndev

In the Linux kernel, the following vulnerability has been resolved: net/iucv: Fix size of interrupt data iucv_irq_data needs to be 4 bytes larger. These bytes are not used by the iucv module, but written by the z/VM hypervisor in case a CPU is deconfigured. Reported as: BUG dma-kmalloc-64 (Not tainted): kmalloc Redzone overwritten ----------------------------------------------------------------------------- 0x0000000000400564-0x0000000000400567 @offset=1380. First byte 0x80 instead of 0xcc Allocated in iucv_cpu_prepare+0x44/0xd0 age=167839 cpu=2 pid=1 __kmem_cache_alloc_node+0x166/0x450 kmalloc_node_trace+0x3a/0x70 iucv_cpu_prepare+0x44/0xd0 cpuhp_invoke_callback+0x156/0x2f0 cpuhp_issue_call+0xf0/0x298 __cpuhp_setup_state_cpuslocked+0x136/0x338 __cpuhp_setup_state+0xf4/0x288 iucv_init+0xf4/0x280 do_one_initcall+0x78/0x390 do_initcalls+0x11a/0x140 kernel_init_freeable+0x25e/0x2a0 kernel_init+0x2e/0x170 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 Freed in iucv_init+0x92/0x280 age=167839 cpu=2 pid=1 __kmem_cache_free+0x308/0x358 iucv_init+0x92/0x280 do_one_initcall+0x78/0x390 do_initcalls+0x11a/0x140 kernel_init_freeable+0x25e/0x2a0 kernel_init+0x2e/0x170 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 Slab 0x0000037200010000 objects=32 used=30 fp=0x0000000000400640 flags=0x1ffff00000010200(slab|head|node=0|zone=0| Object 0x0000000000400540 @offset=1344 fp=0x0000000000000000 Redzone 0000000000400500: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400510: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400520: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400530: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 0000000000400540: 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object 0000000000400550: f3 86 81 f2 f4 82 f8 82 f0 f0 f0 f0 f0 f0 f0 f2 ................ Object 0000000000400560: 00 00 00 00 80 00 00 00 cc cc cc cc cc cc cc cc ................ Object 0000000000400570: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 0000000000400580: cc cc cc cc cc cc cc cc ........ Padding 00000000004005d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding 00000000004005e4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding 00000000004005f4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ CPU: 6 PID: 121030 Comm: 116-pai-crypto. Not tainted 6.3.0-20230221.rc0.git4.99b8246b2d71.300.fc37.s390x+debug #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<000000032aa034ec>] dump_stack_lvl+0xac/0x100 [<0000000329f5a6cc>] check_bytes_and_report+0x104/0x140 [<0000000329f5aa78>] check_object+0x370/0x3c0 [<0000000329f5ede6>] free_debug_processing+0x15e/0x348 [<0000000329f5f06a>] free_to_partial_list+0x9a/0x2f0 [<0000000329f5f4a4>] __slab_free+0x1e4/0x3a8 [<0000000329f61768>] __kmem_cache_free+0x308/0x358 [<000000032a91465c>] iucv_cpu_dead+0x6c/0x88 [<0000000329c2fc66>] cpuhp_invoke_callback+0x156/0x2f0 [<000000032aa062da>] _cpu_down.constprop.0+0x22a/0x5e0 [<0000000329c3243e>] cpu_device_down+0x4e/0x78 [<000000032a61dee0>] device_offline+0xc8/0x118 [<000000032a61e048>] online_store+0x60/0xe0 [<000000032a08b6b0>] kernfs_fop_write_iter+0x150/0x1e8 [<0000000329fab65c>] vfs_write+0x174/0x360 [<0000000329fab9fc>] ksys_write+0x74/0x100 [<000000032aa03a5a>] __do_syscall+0x1da/0x208 [<000000032aa177b2>] system_call+0x82/0xb0 INFO: lockdep is turned off. FIX dma-kmalloc-64: Restoring kmalloc Redzone 0x0000000000400564-0x0000000000400567=0xcc FIX dma-kmalloc-64: Object at 0x0000000000400540 not freed

In the Linux kernel, the following vulnerability has been resolved: net: tunnels: annotate lockless accesses to dev->needed_headroom IP tunnels can apparently update dev->needed_headroom in their xmit path. This patch takes care of three tunnels xmit, and also the core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA() helpers. More changes might be needed for completeness. BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1: ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/i ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler() When performing a stress test on SMC-R by rmmod mlx5_ib driver during the wrk/nginx test, we found that there is a probability of triggering a panic while terminating all link groups. This issue dues to the race between smc_smcr_terminate_all() and smc_buf_create(). smc_smcr_terminate_all smc_buf_create /* init */ conn->sndbuf_desc = NULL; ... __smc_lgr_terminate smc_conn_kill smc_close_abort smc_cdc_get_slot_and_msg_send __softirqentry_text_start smc_wr_tx_process_cqe smc_cdc_tx_handler READ(conn->sndbuf_desc->len); /* panic dues to NULL sndbuf_desc */ conn->sndbuf_desc = xxx; This patch tries to fix the issue by always to check the sndbuf_desc before send any cdc msg, to make sure that no null pointer is seen during cqe processing.

In the Linux kernel, the following vulnerability has been resolved: loop: Fix use-after-free issues do_req_filebacked() calls blk_mq_complete_request() synchronously or asynchronously when using asynchronous I/O unless memory allocation fails. Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor 'rq' after do_req_filebacked() finished unless we are sure that the request has not yet been completed. This patch fixes the following kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054 Call trace: css_put.42938+0x1c/0x1ac loop_process_work+0xc8c/0xfd4 loop_rootcg_workfn+0x24/0x34 process_one_work+0x244/0x558 worker_thread+0x400/0x8fc kthread+0x16c/0x1e0 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix kernel crash during reboot when adapter is in recovery mode If the driver detects during probe that firmware is in recovery mode then i40e_init_recovery_mode() is called and the rest of probe function is skipped including pci_set_drvdata(). Subsequent i40e_shutdown() called during shutdown/reboot dereferences NULL pointer as pci_get_drvdata() returns NULL. To fix call pci_set_drvdata() also during entering to recovery mode. Reproducer: 1) Lets have i40e NIC with firmware in recovery mode 2) Run reboot Result: [ 139.084698] i40e: Intel(R) Ethernet Connection XL710 Network Driver [ 139.090959] i40e: Copyright (c) 2013 - 2019 Intel Corporation. [ 139.108438] i40e 0000:02:00.0: Firmware recovery mode detected. Limiting functionality. [ 139.116439] i40e 0000:02:00.0: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode. [ 139.129499] i40e 0000:02:00.0: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a] [ 139.215932] i40e 0000:02:00.0 enp2s0f0: renamed from eth0 [ 139.223292] i40e 0000:02:00.1: Firmware recovery mode detected. Limiting functionality. [ 139.231292] i40e 0000:02:00.1: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode. [ 139.244406] i40e 0000:02:00.1: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a] [ 139.329209] i40e 0000:02:00.1 enp2s0f1: renamed from eth0 ... [ 156.311376] BUG: kernel NULL pointer dereference, address: 00000000000006c2 [ 156.318330] #PF: supervisor write access in kernel mode [ 156.323546] #PF: error_code(0x0002) - not-present page [ 156.328679] PGD 0 P4D 0 [ 156.331210] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 156.335567] CPU: 26 PID: 15119 Comm: reboot Tainted: G E 6.2.0+ #1 [ 156.343126] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 156.353369] RIP: 0010:i40e_shutdown+0x15/0x130 [i40e] [ 156.358430] Code: c1 fc ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 fd 53 48 8b 9f 48 01 00 00 80 8b c2 06 00 00 04 f0 80 8b c0 06 00 00 08 48 8d bb 08 08 00 [ 156.377168] RSP: 0018:ffffb223c8447d90 EFLAGS: 00010282 [ 156.382384] RAX: ffffffffc073ee70 RBX: 0000000000000000 RCX: 0000000000000001 [ 156.389510] RDX: 0000000080000001 RSI: 0000000000000246 RDI: ffff95db49988000 [ 156.396634] RBP: ffff95db49988000 R08: ffffffffffffffff R09: ffffffff8bd17d40 [ 156.403759] R10: 0000000000000001 R11: ffffffff8a5e3d28 R12: ffff95db49988000 [ 156.410882] R13: ffffffff89a6fe17 R14: ffff95db49988150 R15: 0000000000000000 [ 156.418007] FS: 00007fe7c0cc3980(0000) GS:ffff95ea8ee80000(0000) knlGS:0000000000000000 [ 156.426083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 156.431819] CR2: 00000000000006c2 CR3: 00000003092fc005 CR4: 0000000000770ee0 [ 156.438944] PKRU: 55555554 [ 156.441647] Call Trace: [ 156.444096] [ 156.446199] pci_device_shutdown+0x38/0x60 [ 156.450297] device_shutdown+0x163/0x210 [ 156.454215] kernel_restart+0x12/0x70 [ 156.457872] __do_sys_reboot+0x1ab/0x230 [ 156.461789] ? vfs_writev+0xa6/0x1a0 [ 156.465362] ? __pfx_file_free_rcu+0x10/0x10 [ 156.469635] ? __call_rcu_common.constprop.85+0x109/0x5a0 [ 156.475034] do_syscall_64+0x3e/0x90 [ 156.478611] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 156.483658] RIP: 0033:0x7fe7bff37ab7

In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid potential UAF in nvmet_req_complete() An nvme target ->queue_response() operation implementation may free the request passed as argument. Such implementation potentially could result in a use after free of the request pointer when percpu_ref_put() is called in nvmet_req_complete(). Avoid such problem by using a local variable to save the sq pointer before calling __nvmet_req_complete(), thus avoiding dereferencing the req pointer after that function call.

In the Linux kernel, the following vulnerability has been resolved: fs: prevent out-of-bounds array speculation when closing a file descriptor Google-Bug-Id: 114199369

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: initialize struct pn533_out_arg properly struct pn533_out_arg used as a temporary context for out_urb is not initialized properly. Its uninitialized 'phy' field can be dereferenced in error cases inside pn533_out_complete() callback function. It causes the following failure: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441 Call Trace: __usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671 usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754 dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700 expire_timers+0x234/0x330 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xaf6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x9/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107 Initialize the field with the pn533_usb_phy currently used. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: tcp: tcp_make_synack() can be called from process context tcp_rtx_synack() now could be called in process context as explained in 0a375c822497 ("tcp: tcp_rtx_synack() can be called from process context"). tcp_rtx_synack() might call tcp_make_synack(), which will touch per-CPU variables with preemption enabled. This causes the following BUG: BUG: using __this_cpu_add() in preemptible [00000000] code: ThriftIO1/5464 caller is tcp_make_synack+0x841/0xac0 Call Trace: dump_stack_lvl+0x10d/0x1a0 check_preemption_disabled+0x104/0x110 tcp_make_synack+0x841/0xac0 tcp_v6_send_synack+0x5c/0x450 tcp_rtx_synack+0xeb/0x1f0 inet_rtx_syn_ack+0x34/0x60 tcp_check_req+0x3af/0x9e0 tcp_rcv_state_process+0x59b/0x2030 tcp_v6_do_rcv+0x5f5/0x700 release_sock+0x3a/0xf0 tcp_sendmsg+0x33/0x40 ____sys_sendmsg+0x2f2/0x490 __sys_sendmsg+0x184/0x230 do_syscall_64+0x3d/0x90 Avoid calling __TCP_INC_STATS() with will touch per-cpu variables. Use TCP_INC_STATS() which is safe to be called from context switch.

In the Linux kernel, the following vulnerability has been resolved: PCI: s390: Fix use-after-free of PCI resources with per-function hotplug On s390 PCI functions may be hotplugged individually even when they belong to a multi-function device. In particular on an SR-IOV device VFs may be removed and later re-added. In commit a50297cf8235 ("s390/pci: separate zbus creation from scanning") it was missed however that struct pci_bus and struct zpci_bus's resource list retained a reference to the PCI functions MMIO resources even though those resources are released and freed on hot-unplug. These stale resources may subsequently be claimed when the PCI function re-appears resulting in use-after-free. One idea of fixing this use-after-free in s390 specific code that was investigated was to simply keep resources around from the moment a PCI function first appeared until the whole virtual PCI bus created for a multi-function device disappears. The problem with this however is that due to the requirement of artificial MMIO addreesses (address cookies) extra logic is then needed to keep the address cookies compatible on re-plug. At the same time the MMIO resources semantically belong to the PCI function so tying their lifecycle to the function seems more logical. Instead a simpler approach is to remove the resources of an individually hot-unplugged PCI function from the PCI bus's resource list while keeping the resources of other PCI functions on the PCI bus untouched. This is done by introducing pci_bus_remove_resource() to remove an individual resource. Similarly the resource also needs to be removed from the struct zpci_bus's resource list. It turns out however, that there is really no need to add the MMIO resources to the struct zpci_bus's resource list at all and instead we can simply use the zpci_bar_struct's resource pointer directly.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add() Port is allocated by sas_port_alloc_num() and rphy is allocated by either sas_end_device_alloc() or sas_expander_alloc(), all of which may return NULL. So we need to check the rphy to avoid possible NULL pointer access. If sas_rphy_add() returned with failure, rphy is set to NULL. We would access the rphy in the following lines which would also result NULL pointer access.

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Limit packet length to skb->len Packet length retrieved from skb data may be larger than the actual socket buffer length (up to 9026 bytes). In such case the cloned skb passed up the network stack will leak kernel memory contents.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a server shutdown leak Fix a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the svc_rqst will not be cleaned up.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser() When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Avoid order-5 memory allocation for TPA data The driver needs to keep track of all the possible concurrent TPA (GRO/LRO) completions on the aggregation ring. On P5 chips, the maximum number of concurrent TPA is 256 and the amount of memory we allocate is order-5 on systems using 4K pages. Memory allocation failure has been reported: NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1 Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022 Call Trace: dump_stack+0x57/0x6e warn_alloc.cold.120+0x7b/0xdd ? _cond_resched+0x15/0x30 ? __alloc_pages_direct_compact+0x15f/0x170 __alloc_pages_slowpath.constprop.108+0xc58/0xc70 __alloc_pages_nodemask+0x2d0/0x300 kmalloc_order+0x24/0xe0 kmalloc_order_trace+0x19/0x80 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en] ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en] __bnxt_open_nic+0x12e/0x780 [bnxt_en] bnxt_open+0x10b/0x240 [bnxt_en] __dev_open+0xe9/0x180 __dev_change_flags+0x1af/0x220 dev_change_flags+0x21/0x60 do_setlink+0x35c/0x1100 Instead of allocating this big chunk of memory and dividing it up for the concurrent TPA instances, allocate each small chunk separately for each TPA instance. This will reduce it to order-0 allocations.

In the Linux kernel, the following vulnerability has been resolved: riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode When CONFIG_FRAME_POINTER is unset, the stack unwinding function walk_stackframe randomly reads the stack and then, when KASAN is enabled, it can lead to the following backtrace: [ 0.000000] ================================================================== [ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a [ 0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0 [ 0.000000] [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] Call Trace: [ 0.000000] [] walk_stackframe+0x0/0x11a [ 0.000000] [] init_param_lock+0x26/0x2a [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] dump_stack_lvl+0x22/0x36 [ 0.000000] [] print_report+0x198/0x4a8 [ 0.000000] [] init_param_lock+0x26/0x2a [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] kasan_report+0x9a/0xc8 [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] desc_make_final+0x80/0x84 [ 0.000000] [] stack_trace_save+0x88/0xa6 [ 0.000000] [] filter_irq_stacks+0x72/0x76 [ 0.000000] [] devkmsg_read+0x32a/0x32e [ 0.000000] [] kasan_save_stack+0x28/0x52 [ 0.000000] [] desc_make_final+0x7c/0x84 [ 0.000000] [] stack_trace_save+0x84/0xa6 [ 0.000000] [] kasan_set_track+0x12/0x20 [ 0.000000] [] __kasan_slab_alloc+0x58/0x5e [ 0.000000] [] __kmem_cache_create+0x21e/0x39a [ 0.000000] [] create_boot_cache+0x70/0x9c [ 0.000000] [] kmem_cache_init+0x6c/0x11e [ 0.000000] [] mm_init+0xd8/0xfe [ 0.000000] [] start_kernel+0x190/0x3ca [ 0.000000] [ 0.000000] The buggy address belongs to stack of task swapper/0 [ 0.000000] and is located at offset 0 in frame: [ 0.000000] stack_trace_save+0x0/0xa6 [ 0.000000] [ 0.000000] This frame has 1 object: [ 0.000000] [32, 56) 'c' [ 0.000000] [ 0.000000] The buggy address belongs to the physical page: [ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07 [ 0.000000] flags: 0x1000(reserved|zone=0) [ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000 [ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff [ 0.000000] page dumped because: kasan: bad access detected [ 0.000000] [ 0.000000] Memory state around the buggy address: [ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3 [ 0.000000] ^ [ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ================================================================== Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise mode.

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix struct pid leaks in OOB support syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] alloc_pid+0x6a/0x560 kernel/pid.c:180 [] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: net: caif: Fix use-after-free in cfusbl_device_notify() syzbot reported use-after-free in cfusbl_device_notify() [1]. This causes a stack trace like below: BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214 CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10227 [inline] netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 When unregistering a net device, unregister_netdevice_many_notify() sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers with NETDEV_UNREGISTER, and adds the device to the todo list. Later on, devices in the todo list are processed by netdev_run_todo(). netdev_run_todo() waits devices' reference count become 1 while rebdoadcasting NETDEV_UNREGISTER notification. When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple times, the parent device might be freed. This could cause UAF. Processing NETDEV_UNREGISTER multiple times also causes inbalance of reference count for the module. This patch fixes the issue by accepting only first NETDEV_UNREGISTER notification.

In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause out-of-bounds write in device_property_read_u8_array later.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Remove the /proc/scsi/${proc_name} directory earlier to fix a race condition between unloading and reloading kernel modules. This fixes a bug introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core"). Fix the following kernel warning: proc_dir_entry 'scsi/scsi_debug' already registered WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0 Call Trace: proc_mkdir+0xb5/0xe0 scsi_proc_hostdir_add+0xb5/0x170 scsi_host_alloc+0x683/0x6c0 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug] really_probe+0x159/0x540 __driver_probe_device+0xdc/0x230 driver_probe_device+0x4f/0x120 __device_attach_driver+0xef/0x180 bus_for_each_drv+0xe5/0x130 __device_attach+0x127/0x290 device_initial_probe+0x17/0x20 bus_probe_device+0x110/0x130 device_add+0x673/0xc80 device_register+0x1e/0x30 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug] scsi_debug_init+0x64f/0x1000 [scsi_debug] do_one_initcall+0xd7/0x470 do_init_module+0xe7/0x330 load_module+0x122a/0x12c0 __do_sys_finit_module+0x124/0x1a0 __x64_sys_finit_module+0x46/0x50 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping() ila_xlat_nl_cmd_get_mapping() generates an empty skb, triggerring a recent sanity check [1]. Instead, return an error code, so that user space can get it. [1] skb_assert_len WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline] WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 Modules linked in: CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_assert_len include/linux/skbuff.h:2527 [inline] pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 lr : skb_assert_len include/linux/skbuff.h:2527 [inline] lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 sp : ffff80001e0d6c40 x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0 x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00 x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10 x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0 x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600 x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e Call trace: skb_assert_len include/linux/skbuff.h:2527 [inline] __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 dev_queue_xmit include/linux/netdevice.h:3033 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline] __netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325 netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1283 [inline] netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292 netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380 nlmsg_unicast include/net/netlink.h:1099 [inline] genlmsg_unicast include/net/genetlink.h:433 [inline] genlmsg_reply include/net/genetlink.h:443 [inline] ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x558/0x844 net/socket.c:2479 ___sys_sendmsg net/socket.c:2533 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2562 __do_sys_sendmsg net/socket.c:2571 [inline] __se_sys_sendmsg net/socket.c:2569 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 irq event stamp: 136484 hardirqs last enabled at (136483): [] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345 hardirqs last disabled at (136484): [] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405 softirqs last enabled at (136418): [] softirq_ha ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ice: copy last block omitted in ice_get_module_eeprom() ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ ....

In the Linux kernel, the following vulnerability has been resolved: ext4: fix another off-by-one fsmap error on 1k block filesystems Apparently syzbot figured out that issuing this FSMAP call: struct fsmap_head cmd = { .fmh_count = ...; .fmh_keys = { { .fmr_device = /* ext4 dev */, .fmr_physical = 0, }, { .fmr_device = /* ext4 dev */, .fmr_physical = 0, }, }, ... }; ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd); Produces this crash if the underlying filesystem is a 1k-block ext4 filesystem: kernel BUG at fs/ext4/ext4.h:3331! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G W O 6.2.0-rc8-achx Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4] RSP: 0018:ffffc90007c03998 EFLAGS: 00010246 RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000 RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11 RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400 R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398 FS: 00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0 Call Trace: ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] __ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80] __x64_sys_ioctl+0x82/0xa0 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fdf20558aff RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003 RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010 R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000 For GETFSMAP calls, the caller selects a physical block device by writing its block number into fsmap_head.fmh_keys[01].fmr_device. To query mappings for a subrange of the device, the starting byte of the range is written to fsmap_head.fmh_keys[0].fmr_physical and the last byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical. IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd set the inputs as follows: fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3}, fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14}, Which would return you whatever is mapped in the 12 bytes starting at physical offset 3. The crash is due to insufficient range validation of keys[1] in ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of the filesystem, which means that s_first_data_block is nonzero. ext4_get_group_no_and_offset subtracts this quantity from the blocknr argument before cracking it into a group number and a block number within a group. IOWs, block group 0 spans blocks 1-8192 (1-based) instead of 0-8191 (0-based) like what happens with larger blocksizes. The net result of this encoding is that blocknr < s_first_data_block is not a valid input to this function. The end_fsb variable is set from the keys that are copied from userspace, which means that in the above example, its value is zero. That leads to an underflow here: blocknr = blocknr - le32_to_cpu(es->s_first_data_block); The division then operates on -1: offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >> EXT4_SB(sb)->s_cluster_bits; Leaving an impossibly large group number (2^32-1) in blocknr. ext4_getfsmap_check_keys checked that keys[0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Clear staged_config[] before and after it is used As a temporary storage, staged_config[] in rdt_domain should be cleared before and after it is used. The stale value in staged_config[] could cause an MSR access error. Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3 Cache (MBA should be disabled if the number of CLOSIDs for MB is less than 16.) : mount -t resctrl resctrl -o cdp /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..7} umount /sys/fs/resctrl/ mount -t resctrl resctrl /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..8} An error occurs when creating resource group named p8: unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60) Call Trace: __flush_smp_call_function_queue+0x11d/0x170 __sysvec_call_function+0x24/0xd0 sysvec_call_function+0x89/0xc0 asm_sysvec_call_function+0x16/0x20 When creating a new resource control group, hardware will be configured by the following process: rdtgroup_mkdir() rdtgroup_mkdir_ctrl_mon() rdtgroup_init_alloc() resctrl_arch_update_domains() resctrl_arch_update_domains() iterates and updates all resctrl_conf_type whose have_new_ctrl is true. Since staged_config[] holds the same values as when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA configurations. When group p8 is created, get_config_index() called in resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for CDP_CODE and CDP_DATA, which will be translated to an invalid register - 0xca0 in this scenario. Fix it by clearing staged_config[] before and after it is used. [reinette: re-order commit tags]

In the Linux kernel, the following vulnerability has been resolved: arm64: efi: Make efi_rt_lock a raw_spinlock Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs the following: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by kworker/u320:0/9: #0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) Preemption disabled at: efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248) CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1 Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18 Workqueue: efi_rts_wq efi_call_rts Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:158) show_stack (arch/arm64/kernel/stacktrace.c:165) dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) dump_stack (lib/dump_stack.c:114) __might_resched (kernel/sched/core.c:10134) rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4)) efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) [...] This seems to come from commit ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack") which adds a spinlock. This spinlock is taken through: efi_call_rts() \-efi_call_virt() \-efi_call_virt_pointer() \-arch_efi_call_virt_setup() Make 'efi_rt_lock' a raw_spinlock to avoid being preempted. [ardb: The EFI runtime services are called with a different set of translation tables, and are permitted to use the SIMD registers. The context switch code preserves/restores neither, and so EFI calls must be made with preemption disabled, rather than only disabling migration.]

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix deadlock triggered by cancel_delayed_work_syn() The following LOCKDEP was detected: Workqueue: events smc_lgr_free_work [smc] WARNING: possible circular locking dependency detected 6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted ------------------------------------------------------ kworker/3:0/176251 is trying to acquire lock: 00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}, at: __flush_workqueue+0x7a/0x4f0 but task is already holding lock: 0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_work+0x76/0xf0 __cancel_work_timer+0x170/0x220 __smc_lgr_terminate.part.0+0x34/0x1c0 [smc] smc_connect_rdma+0x15e/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #3 (smc_client_lgr_pending){+.+.}-{3:3}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __mutex_lock+0x96/0x8e8 mutex_lock_nested+0x32/0x40 smc_connect_rdma+0xa4/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #2 (sk_lock-AF_SMC){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 lock_sock_nested+0x46/0xa8 smc_tx_work+0x34/0x50 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 process_one_work+0x2bc/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}: check_prev_add+0xd8/0xe88 validate_chain+0x70c/0xb20 __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_workqueue+0xaa/0x4f0 drain_workqueue+0xaa/0x158 destroy_workqueue+0x44/0x2d8 smc_lgr_free+0x9e/0xf8 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 other info that might help us debug this: Chain exists of: (wq_completion)smc_tx_wq-00000000#2 --> smc_client_lgr_pending --> (work_completion)(&(&lgr->free_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&lgr->free_work)->work)); lock(smc_client_lgr_pending); lock((work_completion) (&(&lgr->free_work)->work)); lock((wq_completion)smc_tx_wq-00000000#2); *** DEADLOCK *** 2 locks held by kworker/3:0/176251: #0: 0000000080183548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x232/0x730 #1: 0000037fffe97dc8 ((work_completion) (&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 stack backtr ---truncated---